summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-11 10:44:22 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-11 10:44:22 -0700
commit9786e34e0a6055dbd1b46e16dfa791ac2b3da289 (patch)
tree0151608bdb134bec3a59748f40c67324798a224e /include
parent791a9a666d1afe2603bcb2c6a4852d684e879252 (diff)
parenta9402889f41cc2db7a9b162990bef271be098ff0 (diff)
downloadlinux-9786e34e0a6055dbd1b46e16dfa791ac2b3da289.tar.bz2
Merge tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: "NAND, from Boris: - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc, davinci, brcmnand, omap) - a huge cleanup/rework of the denali driver accompanied with core fixes/improvements to simplify the driver code - a complete rewrite of the atmel driver to support new DT bindings make future evolution easier - the addition of per-vendor detection/initialization steps to avoid extending the nand_ids table with more extended-id entries SPI NOR, from Cyrille: - fixes in the hisi, intel and Mediatek SPI controller drivers - fixes to some SPI flash memories not supporting the Chip Erase command. - add support to some new memory parts (Winbond, Macronix, Micron, ESMT). - add new driver for the STM32 QSPI controller And a few fixes for Gemini and Versatile platforms on physmap-of" * tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits) MAINTAINERS: Update NAND subsystem git repositories mtd: nand: gpio: update binding mtd: nand: add ooblayout for old hamming layout mtd: oxnas_nand: Allocating more than necessary in probe() dt-bindings: mtd: Document the STM32 QSPI bindings mtd: mtk-nor: set controller's address width according to nor flash mtd: spi-nor: add driver for STM32 quad spi flash controller mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program mtd: nand: davinci: add comment on NAND subpage write status on keystone mtd: nand: omap2: Fix partition creation via cmdline mtdparts mtd: nand: NULL terminate a of_device_id table mtd: nand: Fix a couple error codes mtd: nand: allow drivers to request minimum alignment for passed buffer mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset mtd: nand: denali: allow to override revision number mtd: nand: denali_dt: use pdev instead of ofdev for platform_device mtd: nand: denali_dt: remove dma-mask DT property mtd: nand: denali: support 64bit capable DMA engine mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant mtd: nand: denali: support HW_ECC_FIXUP capability ...
Diffstat (limited to 'include')
-rw-r--r--include/linux/mtd/mtd.h2
-rw-r--r--include/linux/mtd/nand.h96
2 files changed, 69 insertions, 29 deletions
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 79b176eca04a..f8a2ef239c60 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -388,7 +388,7 @@ static inline void mtd_set_of_node(struct mtd_info *mtd,
static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
{
- return mtd->dev.of_node;
+ return dev_of_node(&mtd->dev);
}
static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9591e0fbe5bd..8f67b1581683 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -366,26 +366,6 @@ struct onfi_ext_param_page {
*/
} __packed;
-struct nand_onfi_vendor_micron {
- u8 two_plane_read;
- u8 read_cache;
- u8 read_unique_id;
- u8 dq_imped;
- u8 dq_imped_num_settings;
- u8 dq_imped_feat_addr;
- u8 rb_pulldown_strength;
- u8 rb_pulldown_strength_feat_addr;
- u8 rb_pulldown_strength_num_settings;
- u8 otp_mode;
- u8 otp_page_start;
- u8 otp_data_prot_addr;
- u8 otp_num_pages;
- u8 otp_feat_addr;
- u8 read_retry_options;
- u8 reserved[72];
- u8 param_revision;
-} __packed;
-
struct jedec_ecc_info {
u8 ecc_bits;
u8 codeword_size;
@@ -465,6 +445,17 @@ struct nand_jedec_params {
} __packed;
/**
+ * struct nand_id - NAND id structure
+ * @data: buffer containing the id bytes. Currently 8 bytes large, but can
+ * be extended if required.
+ * @len: ID length.
+ */
+struct nand_id {
+ u8 data[8];
+ int len;
+};
+
+/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
* @active: the mtd device which holds the controller currently
@@ -525,7 +516,7 @@ static inline void nand_hw_control_init(struct nand_hw_control *nfc)
* out-of-band data).
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips corrected in
- * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
+ * any single ECC step, -EIO hw error
* @read_subpage: function to read parts of the page covered by ECC;
* returns same as read_page()
* @write_subpage: function to write parts of the page covered by ECC.
@@ -721,6 +712,20 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
}
/**
+ * struct nand_manufacturer_ops - NAND Manufacturer operations
+ * @detect: detect the NAND memory organization and capabilities
+ * @init: initialize all vendor specific fields (like the ->read_retry()
+ * implementation) if any.
+ * @cleanup: the ->init() function may have allocated resources, ->cleanup()
+ * is here to let vendor specific code release those resources.
+ */
+struct nand_manufacturer_ops {
+ void (*detect)(struct nand_chip *chip);
+ int (*init)(struct nand_chip *chip);
+ void (*cleanup)(struct nand_chip *chip);
+};
+
+/**
* struct nand_chip - NAND Private Flash Chip Data
* @mtd: MTD device registered to the MTD framework
* @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the
@@ -750,6 +755,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
* setting the read-retry mode. Mostly needed for MLC NAND.
* @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
+ * @buf_align: minimum buffer alignment required by a platform
* @hwcontrol: platform-specific hardware control structure
* @erase: [REPLACEABLE] erase function
* @scan_bbt: [REPLACEABLE] function to scan bad block table
@@ -793,6 +799,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
* @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is
* currently in data_buf.
* @subpagesize: [INTERN] holds the subpagesize
+ * @id: [INTERN] holds NAND ID
* @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
* non 0 if ONFI supported.
* @jedec_version: [INTERN] holds the chip JEDEC version (BCD encoded),
@@ -822,7 +829,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
* @errstat: [OPTIONAL] hardware specific function to perform
* additional error status checks (determine if errors are
* correctable).
- * @write_page: [REPLACEABLE] High-level page write function
+ * @manufacturer: [INTERN] Contains manufacturer information
*/
struct nand_chip {
@@ -847,9 +854,6 @@ struct nand_chip {
int (*scan_bbt)(struct mtd_info *mtd);
int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
int status, int page);
- int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offset, int data_len, const uint8_t *buf,
- int oob_required, int page, int cached, int raw);
int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -881,6 +885,7 @@ struct nand_chip {
int badblockpos;
int badblockbits;
+ struct nand_id id;
int onfi_version;
int jedec_version;
union {
@@ -901,6 +906,7 @@ struct nand_chip {
struct nand_ecc_ctrl ecc;
struct nand_buffers *buffers;
+ unsigned long buf_align;
struct nand_hw_control hwcontrol;
uint8_t *bbt;
@@ -910,6 +916,11 @@ struct nand_chip {
struct nand_bbt_descr *badblock_pattern;
void *priv;
+
+ struct {
+ const struct nand_manufacturer *desc;
+ void *priv;
+ } manufacturer;
};
extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
@@ -946,6 +957,17 @@ static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
chip->priv = priv;
}
+static inline void nand_set_manufacturer_data(struct nand_chip *chip,
+ void *priv)
+{
+ chip->manufacturer.priv = priv;
+}
+
+static inline void *nand_get_manufacturer_data(struct nand_chip *chip)
+{
+ return chip->manufacturer.priv;
+}
+
/*
* NAND Flash Manufacturer ID Codes
*/
@@ -1049,17 +1071,33 @@ struct nand_flash_dev {
};
/**
- * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
+ * struct nand_manufacturer - NAND Flash Manufacturer structure
* @name: Manufacturer name
* @id: manufacturer ID code of device.
+ * @ops: manufacturer operations
*/
-struct nand_manufacturers {
+struct nand_manufacturer {
int id;
char *name;
+ const struct nand_manufacturer_ops *ops;
};
+const struct nand_manufacturer *nand_get_manufacturer(u8 id);
+
+static inline const char *
+nand_manufacturer_name(const struct nand_manufacturer *manufacturer)
+{
+ return manufacturer ? manufacturer->name : "Unknown";
+}
+
extern struct nand_flash_dev nand_flash_ids[];
-extern struct nand_manufacturers nand_manuf_ids[];
+
+extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
+extern const struct nand_manufacturer_ops samsung_nand_manuf_ops;
+extern const struct nand_manufacturer_ops hynix_nand_manuf_ops;
+extern const struct nand_manufacturer_ops micron_nand_manuf_ops;
+extern const struct nand_manufacturer_ops amd_nand_manuf_ops;
+extern const struct nand_manufacturer_ops macronix_nand_manuf_ops;
int nand_default_bbt(struct mtd_info *mtd);
int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
@@ -1226,4 +1264,6 @@ int nand_reset(struct nand_chip *chip, int chipnr);
/* Free resources held by the NAND device */
void nand_cleanup(struct nand_chip *chip);
+/* Default extended ID decoding function */
+void nand_decode_ext_id(struct nand_chip *chip);
#endif /* __LINUX_MTD_NAND_H */