Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "The timer and timekeeping departement delivers:

  Core:

   - The consolidation of the VDSO code into a generic library including
     the conversion of x86 and ARM64. Conversion of ARM and MIPS are en
     route through the relevant maintainer trees and should end up in
     5.4.

     This gets rid of the unnecessary different copies of the same code
     and brings all architectures on the same level of VDSO
     functionality.

   - Make the NTP user space interface more robust by restricting the
     TAI offset to prevent undefined behaviour. Includes a selftest.

   - Validate user input in the compat settimeofday() syscall to catch
     invalid values which would be turned into valid values by a
     multiplication overflow

   - Consolidate the time accessors

   - Small fixes, improvements and cleanups all over the place

  Drivers:

   - Support for the NXP system counter, TI davinci timer

   - Move the Microsoft HyperV clocksource/events code into the
     drivers/clocksource directory so it can be shared between x86 and
     ARM64.

   - Overhaul of the Tegra driver

   - Delay timer support for IXP4xx

   - Small fixes, improvements and cleanups as usual"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  time: Validate user input in compat_settimeofday()
  timer: Document TIMER_PINNED
  clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic
  clocksource/drivers: Make Hyper-V clocksource ISA agnostic
  MAINTAINERS: Fix Andy's surname and the directory entries of VDSO
  hrtimer: Use a bullet for the returns bullet list
  arm64: vdso: Fix compilation with clang older than 8
  arm64: compat: Fix __arch_get_hw_counter() implementation
  arm64: Fix __arch_get_hw_counter() implementation
  lib/vdso: Make delta calculation work correctly
  MAINTAINERS: Add entry for the generic VDSO library
  arm64: compat: No need for pre-ARMv7 barriers on an ARMv8 system
  arm64: vdso: Remove unnecessary asm-offsets.c definitions
  vdso: Remove superfluous #ifdef __KERNEL__ in vdso/datapage.h
  clocksource/drivers/davinci: Add support for clocksource
  clocksource/drivers/davinci: Add support for clockevents
  clocksource/drivers/tegra: Set up maximum-ticks limit properly
  clocksource/drivers/tegra: Cycles can't be 0
  clocksource/drivers/tegra: Restore base address before cleanup
  clocksource/drivers/tegra: Add verbose definition for 1MHz constant
  ...

12 files changed, 436 insertions, 27 deletions

diff --git a/include/asm-generic/vdso/vsyscall.h b/include/asm-generic/vdso/vsyscall.h
new file mode 100644
index 000000000000..e94b19782c92
--- /dev/null
+++ b/include/asm-generic/vdso/vsyscall.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_GENERIC_VSYSCALL_H
+#define __ASM_GENERIC_VSYSCALL_H
+
+#ifndef __ASSEMBLY__
+
+#ifndef __arch_get_k_vdso_data
+static __always_inline struct vdso_data *__arch_get_k_vdso_data(void)
+{
+	return NULL;
+}
+#endif /* __arch_get_k_vdso_data */
+
+#ifndef __arch_update_vdso_data
+static __always_inline int __arch_update_vdso_data(void)
+{
+	return 0;
+}
+#endif /* __arch_update_vdso_data */
+
+#ifndef __arch_get_clock_mode
+static __always_inline int __arch_get_clock_mode(struct timekeeper *tk)
+{
+	return 0;
+}
+#endif /* __arch_get_clock_mode */
+
+#ifndef __arch_use_vsyscall
+static __always_inline int __arch_use_vsyscall(struct vdso_data *vdata)
+{
+	return 1;
+}
+#endif /* __arch_use_vsyscall */
+
+#ifndef __arch_update_vsyscall
+static __always_inline void __arch_update_vsyscall(struct vdso_data *vdata,
+						   struct timekeeper *tk)
+{
+}
+#endif /* __arch_update_vsyscall */
+
+#ifndef __arch_sync_vdso_data
+static __always_inline void __arch_sync_vdso_data(struct vdso_data *vdata)
+{
+}
+#endif /* __arch_sync_vdso_data */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_GENERIC_VSYSCALL_H */
diff --git a/include/clocksource/hyperv_timer.h b/include/clocksource/hyperv_timer.h
new file mode 100644
index 000000000000..a821deb8ecb2
--- /dev/null
+++ b/include/clocksource/hyperv_timer.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * Definitions for the clocksource provided by the Hyper-V
+ * hypervisor to guest VMs, as described in the Hyper-V Top
+ * Level Functional Spec (TLFS).
+ *
+ * Copyright (C) 2019, Microsoft, Inc.
+ *
+ * Author:  Michael Kelley <mikelley@microsoft.com>
+ */
+
+#ifndef __CLKSOURCE_HYPERV_TIMER_H
+#define __CLKSOURCE_HYPERV_TIMER_H
+
+#include <linux/clocksource.h>
+#include <linux/math64.h>
+#include <asm/mshyperv.h>
+
+#define HV_MAX_MAX_DELTA_TICKS 0xffffffff
+#define HV_MIN_DELTA_TICKS 1
+
+/* Routines called by the VMbus driver */
+extern int hv_stimer_alloc(int sint);
+extern void hv_stimer_free(void);
+extern void hv_stimer_init(unsigned int cpu);
+extern void hv_stimer_cleanup(unsigned int cpu);
+extern void hv_stimer_global_cleanup(void);
+extern void hv_stimer0_isr(void);
+
+#if IS_ENABLED(CONFIG_HYPERV)
+extern struct clocksource *hyperv_cs;
+extern void hv_init_clocksource(void);
+#endif /* CONFIG_HYPERV */
+
+#ifdef CONFIG_HYPERV_TSCPAGE
+extern struct ms_hyperv_tsc_page *hv_get_tsc_page(void);
+
+static inline notrace u64
+hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg, u64 *cur_tsc)
+{
+	u64 scale, offset;
+	u32 sequence;
+
+	/*
+	 * The protocol for reading Hyper-V TSC page is specified in Hypervisor
+	 * Top-Level Functional Specification ver. 3.0 and above. To get the
+	 * reference time we must do the following:
+	 * - READ ReferenceTscSequence
+	 *   A special '0' value indicates the time source is unreliable and we
+	 *   need to use something else. The currently published specification
+	 *   versions (up to 4.0b) contain a mistake and wrongly claim '-1'
+	 *   instead of '0' as the special value, see commit c35b82ef0294.
+	 * - ReferenceTime =
+	 *        ((RDTSC() * ReferenceTscScale) >> 64) + ReferenceTscOffset
+	 * - READ ReferenceTscSequence again. In case its value has changed
+	 *   since our first reading we need to discard ReferenceTime and repeat
+	 *   the whole sequence as the hypervisor was updating the page in
+	 *   between.
+	 */
+	do {
+		sequence = READ_ONCE(tsc_pg->tsc_sequence);
+		if (!sequence)
+			return U64_MAX;
+		/*
+		 * Make sure we read sequence before we read other values from
+		 * TSC page.
+		 */
+		smp_rmb();
+
+		scale = READ_ONCE(tsc_pg->tsc_scale);
+		offset = READ_ONCE(tsc_pg->tsc_offset);
+		*cur_tsc = hv_get_raw_timer();
+
+		/*
+		 * Make sure we read sequence after we read all other values
+		 * from TSC page.
+		 */
+		smp_rmb();
+
+	} while (READ_ONCE(tsc_pg->tsc_sequence) != sequence);
+
+	return mul_u64_u64_shr(*cur_tsc, scale, 64) + offset;
+}
+
+static inline notrace u64
+hv_read_tsc_page(const struct ms_hyperv_tsc_page *tsc_pg)
+{
+	u64 cur_tsc;
+
+	return hv_read_tsc_page_tsc(tsc_pg, &cur_tsc);
+}
+
+#else /* CONFIG_HYPERV_TSC_PAGE */
+static inline struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
+{
+	return NULL;
+}
+
+static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
+				       u64 *cur_tsc)
+{
+	return U64_MAX;
+}
+#endif /* CONFIG_HYPERV_TSCPAGE */
+
+#endif
diff --git a/include/clocksource/timer-davinci.h b/include/clocksource/timer-davinci.h
new file mode 100644
index 000000000000..1dcc1333fbc8
--- /dev/null
+++ b/include/clocksource/timer-davinci.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * TI DaVinci clocksource driver
+ *
+ * Copyright (C) 2019 Texas Instruments
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#ifndef __TIMER_DAVINCI_H__
+#define __TIMER_DAVINCI_H__
+
+#include <linux/clk.h>
+#include <linux/ioport.h>
+
+enum {
+	DAVINCI_TIMER_CLOCKEVENT_IRQ,
+	DAVINCI_TIMER_CLOCKSOURCE_IRQ,
+	DAVINCI_TIMER_NUM_IRQS,
+};
+
+/**
+ * struct davinci_timer_cfg - davinci clocksource driver configuration struct
+ * @reg:        register range resource
+ * @irq:        clockevent and clocksource interrupt resources
+ * @cmp_off:    if set - it specifies the compare register used for clockevent
+ *
+ * Note: if the compare register is specified, the driver will use the bottom
+ * clock half for both clocksource and clockevent and the compare register
+ * to generate event irqs. The user must supply the correct compare register
+ * interrupt number.
+ *
+ * This is only used by da830 the DSP of which uses the top half. The timer
+ * driver still configures the top half to run in free-run mode.
+ */
+struct davinci_timer_cfg {
+	struct resource reg;
+	struct resource irq[DAVINCI_TIMER_NUM_IRQS];
+	unsigned int cmp_off;
+};
+
+int __init davinci_timer_register(struct clk *clk,
+				  const struct davinci_timer_cfg *data);
+
+#endif /* __TIMER_DAVINCI_H__ */
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 5c6062206760..87c211adf49e 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -116,10 +116,10 @@ enum cpuhp_state {
 	CPUHP_AP_PERF_ARM_ACPI_STARTING,
 	CPUHP_AP_PERF_ARM_STARTING,
 	CPUHP_AP_ARM_L2X0_STARTING,
+	CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
 	CPUHP_AP_ARM_ARCH_TIMER_STARTING,
 	CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,
 	CPUHP_AP_JCORE_TIMER_STARTING,
-	CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
 	CPUHP_AP_ARM_TWD_STARTING,
 	CPUHP_AP_QCOM_TIMER_STARTING,
 	CPUHP_AP_TEGRA_TIMER_STARTING,
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 2e8957eac4d4..4971100a8cab 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -12,8 +12,8 @@
 #ifndef _LINUX_HRTIMER_H
 #define _LINUX_HRTIMER_H
 
+#include <linux/hrtimer_defs.h>
 #include <linux/rbtree.h>
-#include <linux/ktime.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/percpu.h>
@@ -298,26 +298,12 @@ struct clock_event_device;
 
 extern void hrtimer_interrupt(struct clock_event_device *dev);
 
-/*
- * The resolution of the clocks. The resolution value is returned in
- * the clock_getres() system call to give application programmers an
- * idea of the (in)accuracy of timers. Timer values are rounded up to
- * this resolution values.
- */
-# define HIGH_RES_NSEC		1
-# define KTIME_HIGH_RES		(HIGH_RES_NSEC)
-# define MONOTONIC_RES_NSEC	HIGH_RES_NSEC
-# define KTIME_MONOTONIC_RES	KTIME_HIGH_RES
-
 extern void clock_was_set_delayed(void);
 
 extern unsigned int hrtimer_resolution;
 
 #else
 
-# define MONOTONIC_RES_NSEC	LOW_RES_NSEC
-# define KTIME_MONOTONIC_RES	KTIME_LOW_RES
-
 #define hrtimer_resolution	(unsigned int)LOW_RES_NSEC
 
 static inline void clock_was_set_delayed(void) { }
diff --git a/include/linux/hrtimer_defs.h b/include/linux/hrtimer_defs.h
new file mode 100644
index 000000000000..2d3e3c5fb946
--- /dev/null
+++ b/include/linux/hrtimer_defs.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_HRTIMER_DEFS_H
+#define _LINUX_HRTIMER_DEFS_H
+
+#include <linux/ktime.h>
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+
+/*
+ * The resolution of the clocks. The resolution value is returned in
+ * the clock_getres() system call to give application programmers an
+ * idea of the (in)accuracy of timers. Timer values are rounded up to
+ * this resolution values.
+ */
+# define HIGH_RES_NSEC		1
+# define KTIME_HIGH_RES		(HIGH_RES_NSEC)
+# define MONOTONIC_RES_NSEC	HIGH_RES_NSEC
+# define KTIME_MONOTONIC_RES	KTIME_HIGH_RES
+
+#else
+
+# define MONOTONIC_RES_NSEC	LOW_RES_NSEC
+# define KTIME_MONOTONIC_RES	KTIME_LOW_RES
+
+#endif
+
+#endif
diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index a8ab0f143ac4..b27e2ffa96c1 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -113,6 +113,34 @@ static inline ktime_t ktime_get_coarse_clocktai(void)
 	return ktime_get_coarse_with_offset(TK_OFFS_TAI);
 }
 
+static inline ktime_t ktime_get_coarse(void)
+{
+	struct timespec64 ts;
+
+	ktime_get_coarse_ts64(&ts);
+	return timespec64_to_ktime(ts);
+}
+
+static inline u64 ktime_get_coarse_ns(void)
+{
+	return ktime_to_ns(ktime_get_coarse());
+}
+
+static inline u64 ktime_get_coarse_real_ns(void)
+{
+	return ktime_to_ns(ktime_get_coarse_real());
+}
+
+static inline u64 ktime_get_coarse_boottime_ns(void)
+{
+	return ktime_to_ns(ktime_get_coarse_boottime());
+}
+
+static inline u64 ktime_get_coarse_clocktai_ns(void)
+{
+	return ktime_to_ns(ktime_get_coarse_clocktai());
+}
+
 /**
  * ktime_mono_to_real - Convert monotonic time to clock realtime
  */
@@ -131,12 +159,12 @@ static inline u64 ktime_get_real_ns(void)
 	return ktime_to_ns(ktime_get_real());
 }
 
-static inline u64 ktime_get_boot_ns(void)
+static inline u64 ktime_get_boottime_ns(void)
 {
 	return ktime_to_ns(ktime_get_boottime());
 }
 
-static inline u64 ktime_get_tai_ns(void)
+static inline u64 ktime_get_clocktai_ns(void)
 {
 	return ktime_to_ns(ktime_get_clocktai());
 }
diff --git a/include/linux/timer.h b/include/linux/timer.h
index 7b066fd38248..282e4f2a532a 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -36,19 +36,30 @@ struct timer_list {
 #define __TIMER_LOCKDEP_MAP_INITIALIZER(_kn)
 #endif
 
-/*
- * A deferrable timer will work normally when the system is busy, but
- * will not cause a CPU to come out of idle just to service it; instead,
- * the timer will be serviced when the CPU eventually wakes up with a
- * subsequent non-deferrable timer.
+/**
+ * @TIMER_DEFERRABLE: A deferrable timer will work normally when the
+ * system is busy, but will not cause a CPU to come out of idle just
+ * to service it; instead, the timer will be serviced when the CPU
+ * eventually wakes up with a subsequent non-deferrable timer.
  *
- * An irqsafe timer is executed with IRQ disabled and it's safe to wait for
- * the completion of the running instance from IRQ handlers, for example,
- * by calling del_timer_sync().
+ * @TIMER_IRQSAFE: An irqsafe timer is executed with IRQ disabled and
+ * it's safe to wait for the completion of the running instance from
+ * IRQ handlers, for example, by calling del_timer_sync().
  *
  * Note: The irq disabled callback execution is a special case for
  * workqueue locking issues. It's not meant for executing random crap
  * with interrupts disabled. Abuse is monitored!
+ *
+ * @TIMER_PINNED: A pinned timer will not be affected by any timer
+ * placement heuristics (like, NOHZ) and will always expire on the CPU
+ * on which the timer was enqueued.
+ *
+ * Note: Because enqueuing of timers can migrate the timer from one
+ * CPU to another, pinned timers are not guaranteed to stay on the
+ * initialy selected CPU.  They move to the CPU on which the enqueue
+ * function is invoked via mod_timer() or add_timer().  If the timer
+ * should be placed on a particular CPU, then add_timer_on() has to be
+ * used.
  */
 #define TIMER_CPUMASK		0x0003FFFF
 #define TIMER_MIGRATING		0x00040000
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 8fb5be3ca0ca..1fce25b1d87f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2007,7 +2007,7 @@ enum cfg80211_signal_type {
  *	received by the device (not just by the host, in case it was
  *	buffered on the device) and be accurate to about 10ms.
  *	If the frame isn't buffered, just passing the return value of
- *	ktime_get_boot_ns() is likely appropriate.
+ *	ktime_get_boottime_ns() is likely appropriate.
  * @parent_tsf: the time at the start of reception of the first octet of the
  *	timestamp field of the frame. The time is the TSF of the BSS specified
  *	by %parent_bssid.
diff --git a/include/vdso/datapage.h b/include/vdso/datapage.h
new file mode 100644
index 000000000000..2e302c0f41f7
--- /dev/null
+++ b/include/vdso/datapage.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __VDSO_DATAPAGE_H
+#define __VDSO_DATAPAGE_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bits.h>
+#include <linux/time.h>
+#include <linux/types.h>
+
+#define VDSO_BASES	(CLOCK_TAI + 1)
+#define VDSO_HRES	(BIT(CLOCK_REALTIME)		| \
+			 BIT(CLOCK_MONOTONIC)		| \
+			 BIT(CLOCK_BOOTTIME)		| \
+			 BIT(CLOCK_TAI))
+#define VDSO_COARSE	(BIT(CLOCK_REALTIME_COARSE)	| \
+			 BIT(CLOCK_MONOTONIC_COARSE))
+#define VDSO_RAW	(BIT(CLOCK_MONOTONIC_RAW))
+
+#define CS_HRES_COARSE	0
+#define CS_RAW		1
+#define CS_BASES	(CS_RAW + 1)
+
+/**
+ * struct vdso_timestamp - basetime per clock_id
+ * @sec:	seconds
+ * @nsec:	nanoseconds
+ *
+ * There is one vdso_timestamp object in vvar for each vDSO-accelerated
+ * clock_id. For high-resolution clocks, this encodes the time
+ * corresponding to vdso_data.cycle_last. For coarse clocks this encodes
+ * the actual time.
+ *
+ * To be noticed that for highres clocks nsec is left-shifted by
+ * vdso_data.cs[x].shift.
+ */
+struct vdso_timestamp {
+	u64	sec;
+	u64	nsec;
+};
+
+/**
+ * struct vdso_data - vdso datapage representation
+ * @seq:		timebase sequence counter
+ * @clock_mode:		clock mode
+ * @cycle_last:		timebase at clocksource init
+ * @mask:		clocksource mask
+ * @mult:		clocksource multiplier
+ * @shift:		clocksource shift
+ * @basetime[clock_id]:	basetime per clock_id
+ * @tz_minuteswest:	minutes west of Greenwich
+ * @tz_dsttime:		type of DST correction
+ * @hrtimer_res:	hrtimer resolution
+ * @__unused:		unused
+ *
+ * vdso_data will be accessed by 64 bit and compat code at the same time
+ * so we should be careful before modifying this structure.
+ */
+struct vdso_data {
+	u32			seq;
+
+	s32			clock_mode;
+	u64			cycle_last;
+	u64			mask;
+	u32			mult;
+	u32			shift;
+
+	struct vdso_timestamp	basetime[VDSO_BASES];
+
+	s32			tz_minuteswest;
+	s32			tz_dsttime;
+	u32			hrtimer_res;
+	u32			__unused;
+};
+
+/*
+ * We use the hidden visibility to prevent the compiler from generating a GOT
+ * relocation. Not only is going through a GOT useless (the entry couldn't and
+ * must not be overridden by another library), it does not even work: the linker
+ * cannot generate an absolute address to the data page.
+ *
+ * With the hidden visibility, the compiler simply generates a PC-relative
+ * relocation, and this is what we need.
+ */
+extern struct vdso_data _vdso_data[CS_BASES] __attribute__((visibility("hidden")));
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __VDSO_DATAPAGE_H */
diff --git a/include/vdso/helpers.h b/include/vdso/helpers.h
new file mode 100644
index 000000000000..01641dbb68ef
--- /dev/null
+++ b/include/vdso/helpers.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __VDSO_HELPERS_H
+#define __VDSO_HELPERS_H
+
+#ifndef __ASSEMBLY__
+
+#include <vdso/datapage.h>
+
+static __always_inline u32 vdso_read_begin(const struct vdso_data *vd)
+{
+	u32 seq;
+
+	while ((seq = READ_ONCE(vd->seq)) & 1)
+		cpu_relax();
+
+	smp_rmb();
+	return seq;
+}
+
+static __always_inline u32 vdso_read_retry(const struct vdso_data *vd,
+					   u32 start)
+{
+	u32 seq;
+
+	smp_rmb();
+	seq = READ_ONCE(vd->seq);
+	return seq != start;
+}
+
+static __always_inline void vdso_write_begin(struct vdso_data *vd)
+{
+	/*
+	 * WRITE_ONCE it is required otherwise the compiler can validly tear
+	 * updates to vd[x].seq and it is possible that the value seen by the
+	 * reader it is inconsistent.
+	 */
+	WRITE_ONCE(vd[CS_HRES_COARSE].seq, vd[CS_HRES_COARSE].seq + 1);
+	WRITE_ONCE(vd[CS_RAW].seq, vd[CS_RAW].seq + 1);
+	smp_wmb();
+}
+
+static __always_inline void vdso_write_end(struct vdso_data *vd)
+{
+	smp_wmb();
+	/*
+	 * WRITE_ONCE it is required otherwise the compiler can validly tear
+	 * updates to vd[x].seq and it is possible that the value seen by the
+	 * reader it is inconsistent.
+	 */
+	WRITE_ONCE(vd[CS_HRES_COARSE].seq, vd[CS_HRES_COARSE].seq + 1);
+	WRITE_ONCE(vd[CS_RAW].seq, vd[CS_RAW].seq + 1);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __VDSO_HELPERS_H */
diff --git a/include/vdso/vsyscall.h b/include/vdso/vsyscall.h
new file mode 100644
index 000000000000..2c6134e0c23d
--- /dev/null
+++ b/include/vdso/vsyscall.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __VDSO_VSYSCALL_H
+#define __VDSO_VSYSCALL_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/vdso/vsyscall.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __VDSO_VSYSCALL_H */