Merge tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux

Pull initial i3c support from Boris Brezillon:
 "Add initial support for I3C along with two I3C master controller
  drivers"

* tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: cdns: fix I2C transfers in Cadence I3C master driver
  ic3: off by one in mode_show()
  i3c: fix an error code in i3c_master_add_i3c_dev_locked()
  i3c: master: dw: fix mask operation by using the correct operator
  MAINTAINERS: Add myself as the dw-i3c-master module maintainer
  dt-binding: i3c: Document Synopsys DesignWare I3C
  i3c: master: Add driver for Synopsys DesignWare IP
  i3c: master: Remove set but not used variable 'old_i3c_scl_lim'
  dt-bindings: i3c: Document Cadence I3C master bindings
  i3c: master: Add driver for Cadence IP
  MAINTAINERS: Add myself as the I3C subsystem maintainer
  dt-bindings: i3c: Document core bindings
  i3c: Add sysfs ABI spec
  docs: driver-api: Add I3C documentation
  i3c: Add core I3C infrastructure

4 files changed, 1381 insertions, 0 deletions

diff --git a/include/linux/i3c/ccc.h b/include/linux/i3c/ccc.h
new file mode 100644
index 000000000000..73b0982cc519
--- /dev/null
+++ b/include/linux/i3c/ccc.h
@@ -0,0 +1,385 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_CCC_H
+#define I3C_CCC_H
+
+#include <linux/bitops.h>
+#include <linux/i3c/device.h>
+
+/* I3C CCC (Common Command Codes) related definitions */
+#define I3C_CCC_DIRECT			BIT(7)
+
+#define I3C_CCC_ID(id, broadcast)	\
+	((id) | ((broadcast) ? 0 : I3C_CCC_DIRECT))
+
+/* Commands valid in both broadcast and unicast modes */
+#define I3C_CCC_ENEC(broadcast)		I3C_CCC_ID(0x0, broadcast)
+#define I3C_CCC_DISEC(broadcast)	I3C_CCC_ID(0x1, broadcast)
+#define I3C_CCC_ENTAS(as, broadcast)	I3C_CCC_ID(0x2 + (as), broadcast)
+#define I3C_CCC_RSTDAA(broadcast)	I3C_CCC_ID(0x6, broadcast)
+#define I3C_CCC_SETMWL(broadcast)	I3C_CCC_ID(0x9, broadcast)
+#define I3C_CCC_SETMRL(broadcast)	I3C_CCC_ID(0xa, broadcast)
+#define I3C_CCC_SETXTIME(broadcast)	((broadcast) ? 0x28 : 0x98)
+#define I3C_CCC_VENDOR(id, broadcast)	((id) + ((broadcast) ? 0x61 : 0xe0))
+
+/* Broadcast-only commands */
+#define I3C_CCC_ENTDAA			I3C_CCC_ID(0x7, true)
+#define I3C_CCC_DEFSLVS			I3C_CCC_ID(0x8, true)
+#define I3C_CCC_ENTTM			I3C_CCC_ID(0xb, true)
+#define I3C_CCC_ENTHDR(x)		I3C_CCC_ID(0x20 + (x), true)
+
+/* Unicast-only commands */
+#define I3C_CCC_SETDASA			I3C_CCC_ID(0x7, false)
+#define I3C_CCC_SETNEWDA		I3C_CCC_ID(0x8, false)
+#define I3C_CCC_GETMWL			I3C_CCC_ID(0xb, false)
+#define I3C_CCC_GETMRL			I3C_CCC_ID(0xc, false)
+#define I3C_CCC_GETPID			I3C_CCC_ID(0xd, false)
+#define I3C_CCC_GETBCR			I3C_CCC_ID(0xe, false)
+#define I3C_CCC_GETDCR			I3C_CCC_ID(0xf, false)
+#define I3C_CCC_GETSTATUS		I3C_CCC_ID(0x10, false)
+#define I3C_CCC_GETACCMST		I3C_CCC_ID(0x11, false)
+#define I3C_CCC_SETBRGTGT		I3C_CCC_ID(0x13, false)
+#define I3C_CCC_GETMXDS			I3C_CCC_ID(0x14, false)
+#define I3C_CCC_GETHDRCAP		I3C_CCC_ID(0x15, false)
+#define I3C_CCC_GETXTIME		I3C_CCC_ID(0x19, false)
+
+#define I3C_CCC_EVENT_SIR		BIT(0)
+#define I3C_CCC_EVENT_MR		BIT(1)
+#define I3C_CCC_EVENT_HJ		BIT(3)
+
+/**
+ * struct i3c_ccc_events - payload passed to ENEC/DISEC CCC
+ *
+ * @events: bitmask of I3C_CCC_EVENT_xxx events.
+ *
+ * Depending on the CCC command, the specific events coming from all devices
+ * (broadcast version) or a specific device (unicast version) will be
+ * enabled (ENEC) or disabled (DISEC).
+ */
+struct i3c_ccc_events {
+	u8 events;
+};
+
+/**
+ * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC
+ *
+ * @len: maximum write length in bytes
+ *
+ * The maximum write length is only applicable to SDR private messages or
+ * extended Write CCCs (like SETXTIME).
+ */
+struct i3c_ccc_mwl {
+	__be16 len;
+};
+
+/**
+ * struct i3c_ccc_mrl - payload passed to SETMRL/GETMRL CCC
+ *
+ * @len: maximum read length in bytes
+ * @ibi_len: maximum IBI payload length
+ *
+ * The maximum read length is only applicable to SDR private messages or
+ * extended Read CCCs (like GETXTIME).
+ * The IBI length is only valid if the I3C slave is IBI capable
+ * (%I3C_BCR_IBI_REQ_CAP is set).
+ */
+struct i3c_ccc_mrl {
+	__be16 read_len;
+	u8 ibi_len;
+} __packed;
+
+/**
+ * struct i3c_ccc_dev_desc - I3C/I2C device descriptor used for DEFSLVS
+ *
+ * @dyn_addr: dynamic address assigned to the I3C slave or 0 if the entry is
+ *	      describing an I2C slave.
+ * @dcr: DCR value (not applicable to entries describing I2C devices)
+ * @lvr: LVR value (not applicable to entries describing I3C devices)
+ * @bcr: BCR value or 0 if this entry is describing an I2C slave
+ * @static_addr: static address or 0 if the device does not have a static
+ *		 address
+ *
+ * The DEFSLVS command should be passed an array of i3c_ccc_dev_desc
+ * descriptors (one entry per I3C/I2C dev controlled by the master).
+ */
+struct i3c_ccc_dev_desc {
+	u8 dyn_addr;
+	union {
+		u8 dcr;
+		u8 lvr;
+	};
+	u8 bcr;
+	u8 static_addr;
+};
+
+/**
+ * struct i3c_ccc_defslvs - payload passed to DEFSLVS CCC
+ *
+ * @count: number of dev descriptors
+ * @master: descriptor describing the current master
+ * @slaves: array of descriptors describing slaves controlled by the
+ *	    current master
+ *
+ * Information passed to the broadcast DEFSLVS to propagate device
+ * information to all masters currently acting as slaves on the bus.
+ * This is only meaningful if you have more than one master.
+ */
+struct i3c_ccc_defslvs {
+	u8 count;
+	struct i3c_ccc_dev_desc master;
+	struct i3c_ccc_dev_desc slaves[0];
+} __packed;
+
+/**
+ * enum i3c_ccc_test_mode - enum listing all available test modes
+ *
+ * @I3C_CCC_EXIT_TEST_MODE: exit test mode
+ * @I3C_CCC_VENDOR_TEST_MODE: enter vendor test mode
+ */
+enum i3c_ccc_test_mode {
+	I3C_CCC_EXIT_TEST_MODE,
+	I3C_CCC_VENDOR_TEST_MODE,
+};
+
+/**
+ * struct i3c_ccc_enttm - payload passed to ENTTM CCC
+ *
+ * @mode: one of the &enum i3c_ccc_test_mode modes
+ *
+ * Information passed to the ENTTM CCC to instruct an I3C device to enter a
+ * specific test mode.
+ */
+struct i3c_ccc_enttm {
+	u8 mode;
+};
+
+/**
+ * struct i3c_ccc_setda - payload passed to SETNEWDA and SETDASA CCCs
+ *
+ * @addr: dynamic address to assign to an I3C device
+ *
+ * Information passed to the SETNEWDA and SETDASA CCCs to assign/change the
+ * dynamic address of an I3C device.
+ */
+struct i3c_ccc_setda {
+	u8 addr;
+};
+
+/**
+ * struct i3c_ccc_getpid - payload passed to GETPID CCC
+ *
+ * @pid: 48 bits PID in big endian
+ */
+struct i3c_ccc_getpid {
+	u8 pid[6];
+};
+
+/**
+ * struct i3c_ccc_getbcr - payload passed to GETBCR CCC
+ *
+ * @bcr: BCR (Bus Characteristic Register) value
+ */
+struct i3c_ccc_getbcr {
+	u8 bcr;
+};
+
+/**
+ * struct i3c_ccc_getdcr - payload passed to GETDCR CCC
+ *
+ * @dcr: DCR (Device Characteristic Register) value
+ */
+struct i3c_ccc_getdcr {
+	u8 dcr;
+};
+
+#define I3C_CCC_STATUS_PENDING_INT(status)	((status) & GENMASK(3, 0))
+#define I3C_CCC_STATUS_PROTOCOL_ERROR		BIT(5)
+#define I3C_CCC_STATUS_ACTIVITY_MODE(status)	\
+	(((status) & GENMASK(7, 6)) >> 6)
+
+/**
+ * struct i3c_ccc_getstatus - payload passed to GETSTATUS CCC
+ *
+ * @status: status of the I3C slave (see I3C_CCC_STATUS_xxx macros for more
+ *	    information).
+ */
+struct i3c_ccc_getstatus {
+	__be16 status;
+};
+
+/**
+ * struct i3c_ccc_getaccmst - payload passed to GETACCMST CCC
+ *
+ * @newmaster: address of the master taking bus ownership
+ */
+struct i3c_ccc_getaccmst {
+	u8 newmaster;
+};
+
+/**
+ * struct i3c_ccc_bridged_slave_desc - bridged slave descriptor
+ *
+ * @addr: dynamic address of the bridged device
+ * @id: ID of the slave device behind the bridge
+ */
+struct i3c_ccc_bridged_slave_desc {
+	u8 addr;
+	__be16 id;
+} __packed;
+
+/**
+ * struct i3c_ccc_setbrgtgt - payload passed to SETBRGTGT CCC
+ *
+ * @count: number of bridged slaves
+ * @bslaves: bridged slave descriptors
+ */
+struct i3c_ccc_setbrgtgt {
+	u8 count;
+	struct i3c_ccc_bridged_slave_desc bslaves[0];
+} __packed;
+
+/**
+ * enum i3c_sdr_max_data_rate - max data rate values for private SDR transfers
+ */
+enum i3c_sdr_max_data_rate {
+	I3C_SDR0_FSCL_MAX,
+	I3C_SDR1_FSCL_8MHZ,
+	I3C_SDR2_FSCL_6MHZ,
+	I3C_SDR3_FSCL_4MHZ,
+	I3C_SDR4_FSCL_2MHZ,
+};
+
+/**
+ * enum i3c_tsco - clock to data turn-around
+ */
+enum i3c_tsco {
+	I3C_TSCO_8NS,
+	I3C_TSCO_9NS,
+	I3C_TSCO_10NS,
+	I3C_TSCO_11NS,
+	I3C_TSCO_12NS,
+};
+
+#define I3C_CCC_MAX_SDR_FSCL_MASK	GENMASK(2, 0)
+#define I3C_CCC_MAX_SDR_FSCL(x)		((x) & I3C_CCC_MAX_SDR_FSCL_MASK)
+
+/**
+ * struct i3c_ccc_getmxds - payload passed to GETMXDS CCC
+ *
+ * @maxwr: write limitations
+ * @maxrd: read limitations
+ * @maxrdturn: maximum read turn-around expressed micro-seconds and
+ *	       little-endian formatted
+ */
+struct i3c_ccc_getmxds {
+	u8 maxwr;
+	u8 maxrd;
+	u8 maxrdturn[3];
+} __packed;
+
+#define I3C_CCC_HDR_MODE(mode)		BIT(mode)
+
+/**
+ * struct i3c_ccc_gethdrcap - payload passed to GETHDRCAP CCC
+ *
+ * @modes: bitmap of supported HDR modes
+ */
+struct i3c_ccc_gethdrcap {
+	u8 modes;
+} __packed;
+
+/**
+ * enum i3c_ccc_setxtime_subcmd - SETXTIME sub-commands
+ */
+enum i3c_ccc_setxtime_subcmd {
+	I3C_CCC_SETXTIME_ST = 0x7f,
+	I3C_CCC_SETXTIME_DT = 0xbf,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE0 = 0xdf,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE1 = 0xef,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE2 = 0xf7,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE3 = 0xfb,
+	I3C_CCC_SETXTIME_ASYNC_TRIGGER = 0xfd,
+	I3C_CCC_SETXTIME_TPH = 0x3f,
+	I3C_CCC_SETXTIME_TU = 0x9f,
+	I3C_CCC_SETXTIME_ODR = 0x8f,
+};
+
+/**
+ * struct i3c_ccc_setxtime - payload passed to SETXTIME CCC
+ *
+ * @subcmd: one of the sub-commands ddefined in &enum i3c_ccc_setxtime_subcmd
+ * @data: sub-command payload. Amount of data is determined by
+ *	  &i3c_ccc_setxtime->subcmd
+ */
+struct i3c_ccc_setxtime {
+	u8 subcmd;
+	u8 data[0];
+} __packed;
+
+#define I3C_CCC_GETXTIME_SYNC_MODE	BIT(0)
+#define I3C_CCC_GETXTIME_ASYNC_MODE(x)	BIT((x) + 1)
+#define I3C_CCC_GETXTIME_OVERFLOW	BIT(7)
+
+/**
+ * struct i3c_ccc_getxtime - payload retrieved from GETXTIME CCC
+ *
+ * @supported_modes: bitmap describing supported XTIME modes
+ * @state: current status (enabled mode and overflow status)
+ * @frequency: slave's internal oscillator frequency in 500KHz steps
+ * @inaccuracy: slave's internal oscillator inaccuracy in 0.1% steps
+ */
+struct i3c_ccc_getxtime {
+	u8 supported_modes;
+	u8 state;
+	u8 frequency;
+	u8 inaccuracy;
+} __packed;
+
+/**
+ * struct i3c_ccc_cmd_payload - CCC payload
+ *
+ * @len: payload length
+ * @data: payload data. This buffer must be DMA-able
+ */
+struct i3c_ccc_cmd_payload {
+	u16 len;
+	void *data;
+};
+
+/**
+ * struct i3c_ccc_cmd_dest - CCC command destination
+ *
+ * @addr: can be an I3C device address or the broadcast address if this is a
+ *	  broadcast CCC
+ * @payload: payload to be sent to this device or broadcasted
+ */
+struct i3c_ccc_cmd_dest {
+	u8 addr;
+	struct i3c_ccc_cmd_payload payload;
+};
+
+/**
+ * struct i3c_ccc_cmd - CCC command
+ *
+ * @rnw: true if the CCC should retrieve data from the device. Only valid for
+ *	 unicast commands
+ * @id: CCC command id
+ * @ndests: number of destinations. Should always be one for broadcast commands
+ * @dests: array of destinations and associated payload for this CCC. Most of
+ *	   the time, only one destination is provided
+ * @err: I3C error code
+ */
+struct i3c_ccc_cmd {
+	u8 rnw;
+	u8 id;
+	unsigned int ndests;
+	struct i3c_ccc_cmd_dest *dests;
+	enum i3c_error_code err;
+};
+
+#endif /* I3C_CCC_H */
diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h
new file mode 100644
index 000000000000..5ecb055fd375
--- /dev/null
+++ b/include/linux/i3c/device.h
@@ -0,0 +1,331 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_DEV_H
+#define I3C_DEV_H
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kconfig.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+
+/**
+ * enum i3c_error_code - I3C error codes
+ *
+ * These are the standard error codes as defined by the I3C specification.
+ * When -EIO is returned by the i3c_device_do_priv_xfers() or
+ * i3c_device_send_hdr_cmds() one can check the error code in
+ * &struct_i3c_priv_xfer.err or &struct i3c_hdr_cmd.err to get a better idea of
+ * what went wrong.
+ *
+ * @I3C_ERROR_UNKNOWN: unknown error, usually means the error is not I3C
+ *		       related
+ * @I3C_ERROR_M0: M0 error
+ * @I3C_ERROR_M1: M1 error
+ * @I3C_ERROR_M2: M2 error
+ */
+enum i3c_error_code {
+	I3C_ERROR_UNKNOWN = 0,
+	I3C_ERROR_M0 = 1,
+	I3C_ERROR_M1,
+	I3C_ERROR_M2,
+};
+
+/**
+ * enum i3c_hdr_mode - HDR mode ids
+ * @I3C_HDR_DDR: DDR mode
+ * @I3C_HDR_TSP: TSP mode
+ * @I3C_HDR_TSL: TSL mode
+ */
+enum i3c_hdr_mode {
+	I3C_HDR_DDR,
+	I3C_HDR_TSP,
+	I3C_HDR_TSL,
+};
+
+/**
+ * struct i3c_priv_xfer - I3C SDR private transfer
+ * @rnw: encodes the transfer direction. true for a read, false for a write
+ * @len: transfer length in bytes of the transfer
+ * @data: input/output buffer
+ * @data.in: input buffer. Must point to a DMA-able buffer
+ * @data.out: output buffer. Must point to a DMA-able buffer
+ * @err: I3C error code
+ */
+struct i3c_priv_xfer {
+	u8 rnw;
+	u16 len;
+	union {
+		void *in;
+		const void *out;
+	} data;
+	enum i3c_error_code err;
+};
+
+/**
+ * enum i3c_dcr - I3C DCR values
+ * @I3C_DCR_GENERIC_DEVICE: generic I3C device
+ */
+enum i3c_dcr {
+	I3C_DCR_GENERIC_DEVICE = 0,
+};
+
+#define I3C_PID_MANUF_ID(pid)		(((pid) & GENMASK_ULL(47, 33)) >> 33)
+#define I3C_PID_RND_LOWER_32BITS(pid)	(!!((pid) & BIT_ULL(32)))
+#define I3C_PID_RND_VAL(pid)		((pid) & GENMASK_ULL(31, 0))
+#define I3C_PID_PART_ID(pid)		(((pid) & GENMASK_ULL(31, 16)) >> 16)
+#define I3C_PID_INSTANCE_ID(pid)	(((pid) & GENMASK_ULL(15, 12)) >> 12)
+#define I3C_PID_EXTRA_INFO(pid)		((pid) & GENMASK_ULL(11, 0))
+
+#define I3C_BCR_DEVICE_ROLE(bcr)	((bcr) & GENMASK(7, 6))
+#define I3C_BCR_I3C_SLAVE		(0 << 6)
+#define I3C_BCR_I3C_MASTER		(1 << 6)
+#define I3C_BCR_HDR_CAP			BIT(5)
+#define I3C_BCR_BRIDGE			BIT(4)
+#define I3C_BCR_OFFLINE_CAP		BIT(3)
+#define I3C_BCR_IBI_PAYLOAD		BIT(2)
+#define I3C_BCR_IBI_REQ_CAP		BIT(1)
+#define I3C_BCR_MAX_DATA_SPEED_LIM	BIT(0)
+
+/**
+ * struct i3c_device_info - I3C device information
+ * @pid: Provisional ID
+ * @bcr: Bus Characteristic Register
+ * @dcr: Device Characteristic Register
+ * @static_addr: static/I2C address
+ * @dyn_addr: dynamic address
+ * @hdr_cap: supported HDR modes
+ * @max_read_ds: max read speed information
+ * @max_write_ds: max write speed information
+ * @max_ibi_len: max IBI payload length
+ * @max_read_turnaround: max read turn-around time in micro-seconds
+ * @max_read_len: max private SDR read length in bytes
+ * @max_write_len: max private SDR write length in bytes
+ *
+ * These are all basic information that should be advertised by an I3C device.
+ * Some of them are optional depending on the device type and device
+ * capabilities.
+ * For each I3C slave attached to a master with
+ * i3c_master_add_i3c_dev_locked(), the core will send the relevant CCC command
+ * to retrieve these data.
+ */
+struct i3c_device_info {
+	u64 pid;
+	u8 bcr;
+	u8 dcr;
+	u8 static_addr;
+	u8 dyn_addr;
+	u8 hdr_cap;
+	u8 max_read_ds;
+	u8 max_write_ds;
+	u8 max_ibi_len;
+	u32 max_read_turnaround;
+	u16 max_read_len;
+	u16 max_write_len;
+};
+
+/*
+ * I3C device internals are kept hidden from I3C device users. It's just
+ * simpler to refactor things when everything goes through getter/setters, and
+ * I3C device drivers should not have to worry about internal representation
+ * anyway.
+ */
+struct i3c_device;
+
+/* These macros should be used to i3c_device_id entries. */
+#define I3C_MATCH_MANUF_AND_PART (I3C_MATCH_MANUF | I3C_MATCH_PART)
+
+#define I3C_DEVICE(_manufid, _partid, _drvdata)				\
+	{								\
+		.match_flags = I3C_MATCH_MANUF_AND_PART,		\
+		.manuf_id = _manufid,					\
+		.part_id = _partid,					\
+		.data = _drvdata,					\
+	}
+
+#define I3C_DEVICE_EXTRA_INFO(_manufid, _partid, _info, _drvdata)	\
+	{								\
+		.match_flags = I3C_MATCH_MANUF_AND_PART |		\
+			       I3C_MATCH_EXTRA_INFO,			\
+		.manuf_id = _manufid,					\
+		.part_id = _partid,					\
+		.extra_info = _info,					\
+		.data = _drvdata,					\
+	}
+
+#define I3C_CLASS(_dcr, _drvdata)					\
+	{								\
+		.match_flags = I3C_MATCH_DCR,				\
+		.dcr = _dcr,						\
+	}
+
+/**
+ * struct i3c_driver - I3C device driver
+ * @driver: inherit from device_driver
+ * @probe: I3C device probe method
+ * @remove: I3C device remove method
+ * @id_table: I3C device match table. Will be used by the framework to decide
+ *	      which device to bind to this driver
+ */
+struct i3c_driver {
+	struct device_driver driver;
+	int (*probe)(struct i3c_device *dev);
+	int (*remove)(struct i3c_device *dev);
+	const struct i3c_device_id *id_table;
+};
+
+static inline struct i3c_driver *drv_to_i3cdrv(struct device_driver *drv)
+{
+	return container_of(drv, struct i3c_driver, driver);
+}
+
+struct device *i3cdev_to_dev(struct i3c_device *i3cdev);
+struct i3c_device *dev_to_i3cdev(struct device *dev);
+
+static inline void i3cdev_set_drvdata(struct i3c_device *i3cdev,
+				      void *data)
+{
+	struct device *dev = i3cdev_to_dev(i3cdev);
+
+	dev_set_drvdata(dev, data);
+}
+
+static inline void *i3cdev_get_drvdata(struct i3c_device *i3cdev)
+{
+	struct device *dev = i3cdev_to_dev(i3cdev);
+
+	return dev_get_drvdata(dev);
+}
+
+int i3c_driver_register_with_owner(struct i3c_driver *drv,
+				   struct module *owner);
+void i3c_driver_unregister(struct i3c_driver *drv);
+
+#define i3c_driver_register(__drv)		\
+	i3c_driver_register_with_owner(__drv, THIS_MODULE)
+
+/**
+ * module_i3c_driver() - Register a module providing an I3C driver
+ * @__drv: the I3C driver to register
+ *
+ * Provide generic init/exit functions that simply register/unregister an I3C
+ * driver.
+ * Should be used by any driver that does not require extra init/cleanup steps.
+ */
+#define module_i3c_driver(__drv)		\
+	module_driver(__drv, i3c_driver_register, i3c_driver_unregister)
+
+/**
+ * i3c_i2c_driver_register() - Register an i2c and an i3c driver
+ * @i3cdrv: the I3C driver to register
+ * @i2cdrv: the I2C driver to register
+ *
+ * This function registers both @i2cdev and @i3cdev, and fails if one of these
+ * registrations fails. This is mainly useful for devices that support both I2C
+ * and I3C modes.
+ * Note that when CONFIG_I3C is not enabled, this function only registers the
+ * I2C driver.
+ *
+ * Return: 0 if both registrations succeeds, a negative error code otherwise.
+ */
+static inline int i3c_i2c_driver_register(struct i3c_driver *i3cdrv,
+					  struct i2c_driver *i2cdrv)
+{
+	int ret;
+
+	ret = i2c_add_driver(i2cdrv);
+	if (ret || !IS_ENABLED(CONFIG_I3C))
+		return ret;
+
+	ret = i3c_driver_register(i3cdrv);
+	if (ret)
+		i2c_del_driver(i2cdrv);
+
+	return ret;
+}
+
+/**
+ * i3c_i2c_driver_unregister() - Unregister an i2c and an i3c driver
+ * @i3cdrv: the I3C driver to register
+ * @i2cdrv: the I2C driver to register
+ *
+ * This function unregisters both @i3cdrv and @i2cdrv.
+ * Note that when CONFIG_I3C is not enabled, this function only unregisters the
+ * @i2cdrv.
+ */
+static inline void i3c_i2c_driver_unregister(struct i3c_driver *i3cdrv,
+					     struct i2c_driver *i2cdrv)
+{
+	if (IS_ENABLED(CONFIG_I3C))
+		i3c_driver_unregister(i3cdrv);
+
+	i2c_del_driver(i2cdrv);
+}
+
+/**
+ * module_i3c_i2c_driver() - Register a module providing an I3C and an I2C
+ *			     driver
+ * @__i3cdrv: the I3C driver to register
+ * @__i2cdrv: the I3C driver to register
+ *
+ * Provide generic init/exit functions that simply register/unregister an I3C
+ * and an I2C driver.
+ * This macro can be used even if CONFIG_I3C is disabled, in this case, only
+ * the I2C driver will be registered.
+ * Should be used by any driver that does not require extra init/cleanup steps.
+ */
+#define module_i3c_i2c_driver(__i3cdrv, __i2cdrv)	\
+	module_driver(__i3cdrv,				\
+		      i3c_i2c_driver_register,		\
+		      i3c_i2c_driver_unregister)
+
+int i3c_device_do_priv_xfers(struct i3c_device *dev,
+			     struct i3c_priv_xfer *xfers,
+			     int nxfers);
+
+void i3c_device_get_info(struct i3c_device *dev, struct i3c_device_info *info);
+
+struct i3c_ibi_payload {
+	unsigned int len;
+	const void *data;
+};
+
+/**
+ * struct i3c_ibi_setup - IBI setup object
+ * @max_payload_len: maximum length of the payload associated to an IBI. If one
+ *		     IBI appears to have a payload that is bigger than this
+ *		     number, the IBI will be rejected.
+ * @num_slots: number of pre-allocated IBI slots. This should be chosen so that
+ *	       the system never runs out of IBI slots, otherwise you'll lose
+ *	       IBIs.
+ * @handler: IBI handler, every time an IBI is received. This handler is called
+ *	     in a workqueue context. It is allowed to sleep and send new
+ *	     messages on the bus, though it's recommended to keep the
+ *	     processing done there as fast as possible to avoid delaying
+ *	     processing of other queued on the same workqueue.
+ *
+ * Temporary structure used to pass information to i3c_device_request_ibi().
+ * This object can be allocated on the stack since i3c_device_request_ibi()
+ * copies every bit of information and do not use it after
+ * i3c_device_request_ibi() has returned.
+ */
+struct i3c_ibi_setup {
+	unsigned int max_payload_len;
+	unsigned int num_slots;
+	void (*handler)(struct i3c_device *dev,
+			const struct i3c_ibi_payload *payload);
+};
+
+int i3c_device_request_ibi(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *setup);
+void i3c_device_free_ibi(struct i3c_device *dev);
+int i3c_device_enable_ibi(struct i3c_device *dev);
+int i3c_device_disable_ibi(struct i3c_device *dev);
+
+#endif /* I3C_DEV_H */
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
new file mode 100644
index 000000000000..f13fd8b1dd79
--- /dev/null
+++ b/include/linux/i3c/master.h
@@ -0,0 +1,648 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_MASTER_H
+#define I3C_MASTER_H
+
+#include <asm/bitsperlong.h>
+
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/i3c/ccc.h>
+#include <linux/i3c/device.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#define I3C_HOT_JOIN_ADDR		0x2
+#define I3C_BROADCAST_ADDR		0x7e
+#define I3C_MAX_ADDR			GENMASK(6, 0)
+
+struct i3c_master_controller;
+struct i3c_bus;
+struct i2c_device;
+struct i3c_device;
+
+/**
+ * struct i3c_i2c_dev_desc - Common part of the I3C/I2C device descriptor
+ * @node: node element used to insert the slot into the I2C or I3C device
+ *	  list
+ * @master: I3C master that instantiated this device. Will be used to do
+ *	    I2C/I3C transfers
+ * @master_priv: master private data assigned to the device. Can be used to
+ *		 add master specific information
+ *
+ * This structure is describing common I3C/I2C dev information.
+ */
+struct i3c_i2c_dev_desc {
+	struct list_head node;
+	struct i3c_master_controller *master;
+	void *master_priv;
+};
+
+#define I3C_LVR_I2C_INDEX_MASK		GENMASK(7, 5)
+#define I3C_LVR_I2C_INDEX(x)		((x) << 5)
+#define I3C_LVR_I2C_FM_MODE		BIT(4)
+
+#define I2C_MAX_ADDR			GENMASK(9, 0)
+
+/**
+ * struct i2c_dev_boardinfo - I2C device board information
+ * @node: used to insert the boardinfo object in the I2C boardinfo list
+ * @base: regular I2C board information
+ * @lvr: LVR (Legacy Virtual Register) needed by the I3C core to know about
+ *	 the I2C device limitations
+ *
+ * This structure is used to attach board-level information to an I2C device.
+ * Each I2C device connected on the I3C bus should have one.
+ */
+struct i2c_dev_boardinfo {
+	struct list_head node;
+	struct i2c_board_info base;
+	u8 lvr;
+};
+
+/**
+ * struct i2c_dev_desc - I2C device descriptor
+ * @common: common part of the I2C device descriptor
+ * @boardinfo: pointer to the boardinfo attached to this I2C device
+ * @dev: I2C device object registered to the I2C framework
+ *
+ * Each I2C device connected on the bus will have an i2c_dev_desc.
+ * This object is created by the core and later attached to the controller
+ * using &struct_i3c_master_controller->ops->attach_i2c_dev().
+ *
+ * &struct_i2c_dev_desc is the internal representation of an I2C device
+ * connected on an I3C bus. This object is also passed to all
+ * &struct_i3c_master_controller_ops hooks.
+ */
+struct i2c_dev_desc {
+	struct i3c_i2c_dev_desc common;
+	const struct i2c_dev_boardinfo *boardinfo;
+	struct i2c_client *dev;
+};
+
+/**
+ * struct i3c_ibi_slot - I3C IBI (In-Band Interrupt) slot
+ * @work: work associated to this slot. The IBI handler will be called from
+ *	  there
+ * @dev: the I3C device that has generated this IBI
+ * @len: length of the payload associated to this IBI
+ * @data: payload buffer
+ *
+ * An IBI slot is an object pre-allocated by the controller and used when an
+ * IBI comes in.
+ * Every time an IBI comes in, the I3C master driver should find a free IBI
+ * slot in its IBI slot pool, retrieve the IBI payload and queue the IBI using
+ * i3c_master_queue_ibi().
+ *
+ * How IBI slots are allocated is left to the I3C master driver, though, for
+ * simple kmalloc-based allocation, the generic IBI slot pool can be used.
+ */
+struct i3c_ibi_slot {
+	struct work_struct work;
+	struct i3c_dev_desc *dev;
+	unsigned int len;
+	void *data;
+};
+
+/**
+ * struct i3c_device_ibi_info - IBI information attached to a specific device
+ * @all_ibis_handled: used to be informed when no more IBIs are waiting to be
+ *		      processed. Used by i3c_device_disable_ibi() to wait for
+ *		      all IBIs to be dequeued
+ * @pending_ibis: count the number of pending IBIs. Each pending IBI has its
+ *		  work element queued to the controller workqueue
+ * @max_payload_len: maximum payload length for an IBI coming from this device.
+ *		     this value is specified when calling
+ *		     i3c_device_request_ibi() and should not change at run
+ *		     time. All messages IBIs exceeding this limit should be
+ *		     rejected by the master
+ * @num_slots: number of IBI slots reserved for this device
+ * @enabled: reflect the IBI status
+ * @handler: IBI handler specified at i3c_device_request_ibi() call time. This
+ *	     handler will be called from the controller workqueue, and as such
+ *	     is allowed to sleep (though it is recommended to process the IBI
+ *	     as fast as possible to not stall processing of other IBIs queued
+ *	     on the same workqueue).
+ *	     New I3C messages can be sent from the IBI handler
+ *
+ * The &struct_i3c_device_ibi_info object is allocated when
+ * i3c_device_request_ibi() is called and attached to a specific device. This
+ * object is here to manage IBIs coming from a specific I3C device.
+ *
+ * Note that this structure is the generic view of the IBI management
+ * infrastructure. I3C master drivers may have their own internal
+ * representation which they can associate to the device using
+ * controller-private data.
+ */
+struct i3c_device_ibi_info {
+	struct completion all_ibis_handled;
+	atomic_t pending_ibis;
+	unsigned int max_payload_len;
+	unsigned int num_slots;
+	unsigned int enabled;
+	void (*handler)(struct i3c_device *dev,
+			const struct i3c_ibi_payload *payload);
+};
+
+/**
+ * struct i3c_dev_boardinfo - I3C device board information
+ * @node: used to insert the boardinfo object in the I3C boardinfo list
+ * @init_dyn_addr: initial dynamic address requested by the FW. We provide no
+ *		   guarantee that the device will end up using this address,
+ *		   but try our best to assign this specific address to the
+ *		   device
+ * @static_addr: static address the I3C device listen on before it's been
+ *		 assigned a dynamic address by the master. Will be used during
+ *		 bus initialization to assign it a specific dynamic address
+ *		 before starting DAA (Dynamic Address Assignment)
+ * @pid: I3C Provisional ID exposed by the device. This is a unique identifier
+ *	 that may be used to attach boardinfo to i3c_dev_desc when the device
+ *	 does not have a static address
+ * @of_node: optional DT node in case the device has been described in the DT
+ *
+ * This structure is used to attach board-level information to an I3C device.
+ * Not all I3C devices connected on the bus will have a boardinfo. It's only
+ * needed if you want to attach extra resources to a device or assign it a
+ * specific dynamic address.
+ */
+struct i3c_dev_boardinfo {
+	struct list_head node;
+	u8 init_dyn_addr;
+	u8 static_addr;
+	u64 pid;
+	struct device_node *of_node;
+};
+
+/**
+ * struct i3c_dev_desc - I3C device descriptor
+ * @common: common part of the I3C device descriptor
+ * @info: I3C device information. Will be automatically filled when you create
+ *	  your device with i3c_master_add_i3c_dev_locked()
+ * @ibi_lock: lock used to protect the &struct_i3c_device->ibi
+ * @ibi: IBI info attached to a device. Should be NULL until
+ *	 i3c_device_request_ibi() is called
+ * @dev: pointer to the I3C device object exposed to I3C device drivers. This
+ *	 should never be accessed from I3C master controller drivers. Only core
+ *	 code should manipulate it in when updating the dev <-> desc link or
+ *	 when propagating IBI events to the driver
+ * @boardinfo: pointer to the boardinfo attached to this I3C device
+ *
+ * Internal representation of an I3C device. This object is only used by the
+ * core and passed to I3C master controller drivers when they're requested to
+ * do some operations on the device.
+ * The core maintains the link between the internal I3C dev descriptor and the
+ * object exposed to the I3C device drivers (&struct_i3c_device).
+ */
+struct i3c_dev_desc {
+	struct i3c_i2c_dev_desc common;
+	struct i3c_device_info info;
+	struct mutex ibi_lock;
+	struct i3c_device_ibi_info *ibi;
+	struct i3c_device *dev;
+	const struct i3c_dev_boardinfo *boardinfo;
+};
+
+/**
+ * struct i3c_device - I3C device object
+ * @dev: device object to register the I3C dev to the device model
+ * @desc: pointer to an i3c device descriptor object. This link is updated
+ *	  every time the I3C device is rediscovered with a different dynamic
+ *	  address assigned
+ * @bus: I3C bus this device is attached to
+ *
+ * I3C device object exposed to I3C device drivers. The takes care of linking
+ * this object to the relevant &struct_i3c_dev_desc one.
+ * All I3C devs on the I3C bus are represented, including I3C masters. For each
+ * of them, we have an instance of &struct i3c_device.
+ */
+struct i3c_device {
+	struct device dev;
+	struct i3c_dev_desc *desc;
+	struct i3c_bus *bus;
+};
+
+/*
+ * The I3C specification says the maximum number of devices connected on the
+ * bus is 11, but this number depends on external parameters like trace length,
+ * capacitive load per Device, and the types of Devices present on the Bus.
+ * I3C master can also have limitations, so this number is just here as a
+ * reference and should be adjusted on a per-controller/per-board basis.
+ */
+#define I3C_BUS_MAX_DEVS		11
+
+#define I3C_BUS_MAX_I3C_SCL_RATE	12900000
+#define I3C_BUS_TYP_I3C_SCL_RATE	12500000
+#define I3C_BUS_I2C_FM_PLUS_SCL_RATE	1000000
+#define I3C_BUS_I2C_FM_SCL_RATE		400000
+#define I3C_BUS_TLOW_OD_MIN_NS		200
+
+/**
+ * enum i3c_bus_mode - I3C bus mode
+ * @I3C_BUS_MODE_PURE: only I3C devices are connected to the bus. No limitation
+ *		       expected
+ * @I3C_BUS_MODE_MIXED_FAST: I2C devices with 50ns spike filter are present on
+ *			     the bus. The only impact in this mode is that the
+ *			     high SCL pulse has to stay below 50ns to trick I2C
+ *			     devices when transmitting I3C frames
+ * @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present
+ *			     on the bus
+ */
+enum i3c_bus_mode {
+	I3C_BUS_MODE_PURE,
+	I3C_BUS_MODE_MIXED_FAST,
+	I3C_BUS_MODE_MIXED_SLOW,
+};
+
+/**
+ * enum i3c_addr_slot_status - I3C address slot status
+ * @I3C_ADDR_SLOT_FREE: address is free
+ * @I3C_ADDR_SLOT_RSVD: address is reserved
+ * @I3C_ADDR_SLOT_I2C_DEV: address is assigned to an I2C device
+ * @I3C_ADDR_SLOT_I3C_DEV: address is assigned to an I3C device
+ * @I3C_ADDR_SLOT_STATUS_MASK: address slot mask
+ *
+ * On an I3C bus, addresses are assigned dynamically, and we need to know which
+ * addresses are free to use and which ones are already assigned.
+ *
+ * Addresses marked as reserved are those reserved by the I3C protocol
+ * (broadcast address, ...).
+ */
+enum i3c_addr_slot_status {
+	I3C_ADDR_SLOT_FREE,
+	I3C_ADDR_SLOT_RSVD,
+	I3C_ADDR_SLOT_I2C_DEV,
+	I3C_ADDR_SLOT_I3C_DEV,
+	I3C_ADDR_SLOT_STATUS_MASK = 3,
+};
+
+/**
+ * struct i3c_bus - I3C bus object
+ * @cur_master: I3C master currently driving the bus. Since I3C is multi-master
+ *		this can change over the time. Will be used to let a master
+ *		know whether it needs to request bus ownership before sending
+ *		a frame or not
+ * @id: bus ID. Assigned by the framework when register the bus
+ * @addrslots: a bitmap with 2-bits per-slot to encode the address status and
+ *	       ease the DAA (Dynamic Address Assignment) procedure (see
+ *	       &enum i3c_addr_slot_status)
+ * @mode: bus mode (see &enum i3c_bus_mode)
+ * @scl_rate.i3c: maximum rate for the clock signal when doing I3C SDR/priv
+ *		  transfers
+ * @scl_rate.i2c: maximum rate for the clock signal when doing I2C transfers
+ * @scl_rate: SCL signal rate for I3C and I2C mode
+ * @devs.i3c: contains a list of I3C device descriptors representing I3C
+ *	      devices connected on the bus and successfully attached to the
+ *	      I3C master
+ * @devs.i2c: contains a list of I2C device descriptors representing I2C
+ *	      devices connected on the bus and successfully attached to the
+ *	      I3C master
+ * @devs: 2 lists containing all I3C/I2C devices connected to the bus
+ * @lock: read/write lock on the bus. This is needed to protect against
+ *	  operations that have an impact on the whole bus and the devices
+ *	  connected to it. For example, when asking slaves to drop their
+ *	  dynamic address (RSTDAA CCC), we need to make sure no one is trying
+ *	  to send I3C frames to these devices.
+ *	  Note that this lock does not protect against concurrency between
+ *	  devices: several drivers can send different I3C/I2C frames through
+ *	  the same master in parallel. This is the responsibility of the
+ *	  master to guarantee that frames are actually sent sequentially and
+ *	  not interlaced
+ *
+ * The I3C bus is represented with its own object and not implicitly described
+ * by the I3C master to cope with the multi-master functionality, where one bus
+ * can be shared amongst several masters, each of them requesting bus ownership
+ * when they need to.
+ */
+struct i3c_bus {
+	struct i3c_dev_desc *cur_master;
+	int id;
+	unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG];
+	enum i3c_bus_mode mode;
+	struct {
+		unsigned long i3c;
+		unsigned long i2c;
+	} scl_rate;
+	struct {
+		struct list_head i3c;
+		struct list_head i2c;
+	} devs;
+	struct rw_semaphore lock;
+};
+
+/**
+ * struct i3c_master_controller_ops - I3C master methods
+ * @bus_init: hook responsible for the I3C bus initialization. You should at
+ *	      least call master_set_info() from there and set the bus mode.
+ *	      You can also put controller specific initialization in there.
+ *	      This method is mandatory.
+ * @bus_cleanup: cleanup everything done in
+ *		 &i3c_master_controller_ops->bus_init().
+ *		 This method is optional.
+ * @attach_i3c_dev: called every time an I3C device is attached to the bus. It
+ *		    can be after a DAA or when a device is statically declared
+ *		    by the FW, in which case it will only have a static address
+ *		    and the dynamic address will be 0.
+ *		    When this function is called, device information have not
+ *		    been retrieved yet.
+ *		    This is a good place to attach master controller specific
+ *		    data to I3C devices.
+ *		    This method is optional.
+ * @reattach_i3c_dev: called every time an I3C device has its addressed
+ *		      changed. It can be because the device has been powered
+ *		      down and has lost its address, or it can happen when a
+ *		      device had a static address and has been assigned a
+ *		      dynamic address with SETDASA.
+ *		      This method is optional.
+ * @detach_i3c_dev: called when an I3C device is detached from the bus. Usually
+ *		    happens when the master device is unregistered.
+ *		    This method is optional.
+ * @do_daa: do a DAA (Dynamic Address Assignment) procedure. This is procedure
+ *	    should send an ENTDAA CCC command and then add all devices
+ *	    discovered sure the DAA using i3c_master_add_i3c_dev_locked().
+ *	    Add devices added with i3c_master_add_i3c_dev_locked() will then be
+ *	    attached or re-attached to the controller.
+ *	    This method is mandatory.
+ * @supports_ccc_cmd: should return true if the CCC command is supported, false
+ *		      otherwise.
+ *		      This method is optional, if not provided the core assumes
+ *		      all CCC commands are supported.
+ * @send_ccc_cmd: send a CCC command
+ *		  This method is mandatory.
+ * @priv_xfers: do one or several private I3C SDR transfers
+ *		This method is mandatory.
+ * @attach_i2c_dev: called every time an I2C device is attached to the bus.
+ *		    This is a good place to attach master controller specific
+ *		    data to I2C devices.
+ *		    This method is optional.
+ * @detach_i2c_dev: called when an I2C device is detached from the bus. Usually
+ *		    happens when the master device is unregistered.
+ *		    This method is optional.
+ * @i2c_xfers: do one or several I2C transfers. Note that, unlike i3c
+ *	       transfers, the core does not guarantee that buffers attached to
+ *	       the transfers are DMA-safe. If drivers want to have DMA-safe
+ *	       buffers, they should use the i2c_get_dma_safe_msg_buf()
+ *	       and i2c_put_dma_safe_msg_buf() helpers provided by the I2C
+ *	       framework.
+ *	       This method is mandatory.
+ * @i2c_funcs: expose the supported I2C functionalities.
+ *	       This method is mandatory.
+ * @request_ibi: attach an IBI handler to an I3C device. This implies defining
+ *		 an IBI handler and the constraints of the IBI (maximum payload
+ *		 length and number of pre-allocated slots).
+ *		 Some controllers support less IBI-capable devices than regular
+ *		 devices, so this method might return -%EBUSY if there's no
+ *		 more space for an extra IBI registration
+ *		 This method is optional.
+ * @free_ibi: free an IBI previously requested with ->request_ibi(). The IBI
+ *	      should have been disabled with ->disable_irq() prior to that
+ *	      This method is mandatory only if ->request_ibi is not NULL.
+ * @enable_ibi: enable the IBI. Only valid if ->request_ibi() has been called
+ *		prior to ->enable_ibi(). The controller should first enable
+ *		the IBI on the controller end (for example, unmask the hardware
+ *		IRQ) and then send the ENEC CCC command (with the IBI flag set)
+ *		to the I3C device.
+ *		This method is mandatory only if ->request_ibi is not NULL.
+ * @disable_ibi: disable an IBI. First send the DISEC CCC command with the IBI
+ *		 flag set and then deactivate the hardware IRQ on the
+ *		 controller end.
+ *		 This method is mandatory only if ->request_ibi is not NULL.
+ * @recycle_ibi_slot: recycle an IBI slot. Called every time an IBI has been
+ *		      processed by its handler. The IBI slot should be put back
+ *		      in the IBI slot pool so that the controller can re-use it
+ *		      for a future IBI
+ *		      This method is mandatory only if ->request_ibi is not
+ *		      NULL.
+ */
+struct i3c_master_controller_ops {
+	int (*bus_init)(struct i3c_master_controller *master);
+	void (*bus_cleanup)(struct i3c_master_controller *master);
+	int (*attach_i3c_dev)(struct i3c_dev_desc *dev);
+	int (*reattach_i3c_dev)(struct i3c_dev_desc *dev, u8 old_dyn_addr);
+	void (*detach_i3c_dev)(struct i3c_dev_desc *dev);
+	int (*do_daa)(struct i3c_master_controller *master);
+	bool (*supports_ccc_cmd)(struct i3c_master_controller *master,
+				 const struct i3c_ccc_cmd *cmd);
+	int (*send_ccc_cmd)(struct i3c_master_controller *master,
+			    struct i3c_ccc_cmd *cmd);
+	int (*priv_xfers)(struct i3c_dev_desc *dev,
+			  struct i3c_priv_xfer *xfers,
+			  int nxfers);
+	int (*attach_i2c_dev)(struct i2c_dev_desc *dev);
+	void (*detach_i2c_dev)(struct i2c_dev_desc *dev);
+	int (*i2c_xfers)(struct i2c_dev_desc *dev,
+			 const struct i2c_msg *xfers, int nxfers);
+	u32 (*i2c_funcs)(struct i3c_master_controller *master);
+	int (*request_ibi)(struct i3c_dev_desc *dev,
+			   const struct i3c_ibi_setup *req);
+	void (*free_ibi)(struct i3c_dev_desc *dev);
+	int (*enable_ibi)(struct i3c_dev_desc *dev);
+	int (*disable_ibi)(struct i3c_dev_desc *dev);
+	void (*recycle_ibi_slot)(struct i3c_dev_desc *dev,
+				 struct i3c_ibi_slot *slot);
+};
+
+/**
+ * struct i3c_master_controller - I3C master controller object
+ * @dev: device to be registered to the device-model
+ * @this: an I3C device object representing this master. This device will be
+ *	  added to the list of I3C devs available on the bus
+ * @i2c: I2C adapter used for backward compatibility. This adapter is
+ *	 registered to the I2C subsystem to be as transparent as possible to
+ *	 existing I2C drivers
+ * @ops: master operations. See &struct i3c_master_controller_ops
+ * @secondary: true if the master is a secondary master
+ * @init_done: true when the bus initialization is done
+ * @boardinfo.i3c: list of I3C  boardinfo objects
+ * @boardinfo.i2c: list of I2C boardinfo objects
+ * @boardinfo: board-level information attached to devices connected on the bus
+ * @bus: I3C bus exposed by this master
+ * @wq: workqueue used to execute IBI handlers. Can also be used by master
+ *	drivers if they need to postpone operations that need to take place
+ *	in a thread context. Typical examples are Hot Join processing which
+ *	requires taking the bus lock in maintenance, which in turn, can only
+ *	be done from a sleep-able context
+ *
+ * A &struct i3c_master_controller has to be registered to the I3C subsystem
+ * through i3c_master_register(). None of &struct i3c_master_controller fields
+ * should be set manually, just pass appropriate values to
+ * i3c_master_register().
+ */
+struct i3c_master_controller {
+	struct device dev;
+	struct i3c_dev_desc *this;
+	struct i2c_adapter i2c;
+	const struct i3c_master_controller_ops *ops;
+	unsigned int secondary : 1;
+	unsigned int init_done : 1;
+	struct {
+		struct list_head i3c;
+		struct list_head i2c;
+	} boardinfo;
+	struct i3c_bus bus;
+	struct workqueue_struct *wq;
+};
+
+/**
+ * i3c_bus_for_each_i2cdev() - iterate over all I2C devices present on the bus
+ * @bus: the I3C bus
+ * @dev: an I2C device descriptor pointer updated to point to the current slot
+ *	 at each iteration of the loop
+ *
+ * Iterate over all I2C devs present on the bus.
+ */
+#define i3c_bus_for_each_i2cdev(bus, dev)				\
+	list_for_each_entry(dev, &(bus)->devs.i2c, common.node)
+
+/**
+ * i3c_bus_for_each_i3cdev() - iterate over all I3C devices present on the bus
+ * @bus: the I3C bus
+ * @dev: and I3C device descriptor pointer updated to point to the current slot
+ *	 at each iteration of the loop
+ *
+ * Iterate over all I3C devs present on the bus.
+ */
+#define i3c_bus_for_each_i3cdev(bus, dev)				\
+	list_for_each_entry(dev, &(bus)->devs.i3c, common.node)
+
+int i3c_master_do_i2c_xfers(struct i3c_master_controller *master,
+			    const struct i2c_msg *xfers,
+			    int nxfers);
+
+int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr,
+			    u8 evts);
+int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr,
+			   u8 evts);
+int i3c_master_entdaa_locked(struct i3c_master_controller *master);
+int i3c_master_defslvs_locked(struct i3c_master_controller *master);
+
+int i3c_master_get_free_addr(struct i3c_master_controller *master,
+			     u8 start_addr);
+
+int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
+				  u8 addr);
+int i3c_master_do_daa(struct i3c_master_controller *master);
+
+int i3c_master_set_info(struct i3c_master_controller *master,
+			const struct i3c_device_info *info);
+
+int i3c_master_register(struct i3c_master_controller *master,
+			struct device *parent,
+			const struct i3c_master_controller_ops *ops,
+			bool secondary);
+int i3c_master_unregister(struct i3c_master_controller *master);
+
+/**
+ * i3c_dev_get_master_data() - get master private data attached to an I3C
+ *			       device descriptor
+ * @dev: the I3C device descriptor to get private data from
+ *
+ * Return: the private data previously attached with i3c_dev_set_master_data()
+ *	   or NULL if no data has been attached to the device.
+ */
+static inline void *i3c_dev_get_master_data(const struct i3c_dev_desc *dev)
+{
+	return dev->common.master_priv;
+}
+
+/**
+ * i3c_dev_set_master_data() - attach master private data to an I3C device
+ *			       descriptor
+ * @dev: the I3C device descriptor to attach private data to
+ * @data: private data
+ *
+ * This functions allows a master controller to attach per-device private data
+ * which can then be retrieved with i3c_dev_get_master_data().
+ */
+static inline void i3c_dev_set_master_data(struct i3c_dev_desc *dev,
+					   void *data)
+{
+	dev->common.master_priv = data;
+}
+
+/**
+ * i2c_dev_get_master_data() - get master private data attached to an I2C
+ *			       device descriptor
+ * @dev: the I2C device descriptor to get private data from
+ *
+ * Return: the private data previously attached with i2c_dev_set_master_data()
+ *	   or NULL if no data has been attached to the device.
+ */
+static inline void *i2c_dev_get_master_data(const struct i2c_dev_desc *dev)
+{
+	return dev->common.master_priv;
+}
+
+/**
+ * i2c_dev_set_master_data() - attach master private data to an I2C device
+ *			       descriptor
+ * @dev: the I2C device descriptor to attach private data to
+ * @data: private data
+ *
+ * This functions allows a master controller to attach per-device private data
+ * which can then be retrieved with i2c_device_get_master_data().
+ */
+static inline void i2c_dev_set_master_data(struct i2c_dev_desc *dev,
+					   void *data)
+{
+	dev->common.master_priv = data;
+}
+
+/**
+ * i3c_dev_get_master() - get master used to communicate with a device
+ * @dev: I3C dev
+ *
+ * Return: the master controller driving @dev
+ */
+static inline struct i3c_master_controller *
+i3c_dev_get_master(struct i3c_dev_desc *dev)
+{
+	return dev->common.master;
+}
+
+/**
+ * i2c_dev_get_master() - get master used to communicate with a device
+ * @dev: I2C dev
+ *
+ * Return: the master controller driving @dev
+ */
+static inline struct i3c_master_controller *
+i2c_dev_get_master(struct i2c_dev_desc *dev)
+{
+	return dev->common.master;
+}
+
+/**
+ * i3c_master_get_bus() - get the bus attached to a master
+ * @master: master object
+ *
+ * Return: the I3C bus @master is connected to
+ */
+static inline struct i3c_bus *
+i3c_master_get_bus(struct i3c_master_controller *master)
+{
+	return &master->bus;
+}
+
+struct i3c_generic_ibi_pool;
+
+struct i3c_generic_ibi_pool *
+i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev,
+			   const struct i3c_ibi_setup *req);
+void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool);
+
+struct i3c_ibi_slot *
+i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool);
+void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool,
+				  struct i3c_ibi_slot *slot);
+
+void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot);
+
+struct i3c_ibi_slot *i3c_master_get_free_ibi_slot(struct i3c_dev_desc *dev);
+
+#endif /* I3C_MASTER_H */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index a0dcc9b6a723..f9bd2f34b99f 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -448,6 +448,23 @@ struct pci_epf_device_id {
 	kernel_ulong_t driver_data;
 };
 
+/* i3c */
+
+#define I3C_MATCH_DCR			0x1
+#define I3C_MATCH_MANUF			0x2
+#define I3C_MATCH_PART			0x4
+#define I3C_MATCH_EXTRA_INFO		0x8
+
+struct i3c_device_id {
+	__u8 match_flags;
+	__u8 dcr;
+	__u16 manuf_id;
+	__u16 part_id;
+	__u16 extra_info;
+
+	const void *data;
+};
+
 /* spi */
 
 #define SPI_NAME_SIZE	32