Merge tag 'spi-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "There's quite a lot of changes for SPI in this release but none in the
  core, they're all mostly small driver updates and additions. Some of
  the more notable changes include:

   - A huge set of cleanups, optimizations and improvements for the
     DesignWare driver from Serge Semin finishing up the work started
     last release.

   - Conversion of the Zynq gqspi driver to spi-mem.

   - Support for Baikal T1, Broadcom BCMSTB 7445, and Renesas R8A7742"

* tag 'spi-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (137 commits)
  spi: cadence: Add SPI transfer delays
  spi: dw: Add Baikal-T1 SPI Controller bindings
  spi: dw: Add Baikal-T1 SPI Controller glue driver
  spi: dw: Add poll-based SPI transfers support
  spi: dw: Introduce max mem-ops SPI bus frequency setting
  spi: dw: Add memory operations support
  spi: dw: Add generic DW SSI status-check method
  spi: dw: Move num-of retries parameter to the header file
  spi: dw: Explicitly de-assert CS on SPI transfer completion
  spi: dw: De-assert chip-select on reset
  spi: dw: Discard chip enabling on DMA setup error
  spi: dw: Unmask IRQs after enabling the chip
  spi: dw: Perform IRQ setup in a dedicated function
  spi: dw: Refactor IRQ-based SPI transfer procedure
  spi: dw: Refactor data IO procedure
  spi: dw: Add DW SPI controller config structure
  spi: dw: Update Rx sample delay in the config function
  spi: dw: Simplify the SPI bus speed config procedure
  spi: dw: Update SPI bus speed in a config function
  spi: dw: Detach SPI device specific CR0 config method
  ...

1 files changed, 86 insertions, 79 deletions

diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 6facf27865f9..7f73b26ed22e 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  pxa2xx_ssp.h
- *
  *  Copyright (C) 2003 Russell King, All Rights Reserved.
  *
  * This driver supports the following PXA CPU/SSP ports:-
@@ -16,10 +14,16 @@
 #ifndef __LINUX_SSP_H
 #define __LINUX_SSP_H
 
-#include <linux/list.h>
+#include <linux/bits.h>
+#include <linux/compiler_types.h>
 #include <linux/io.h>
-#include <linux/of.h>
+#include <linux/kconfig.h>
+#include <linux/list.h>
+#include <linux/types.h>
 
+struct clk;
+struct device;
+struct device_node;
 
 /*
  * SSP Serial Port Registers
@@ -43,130 +47,127 @@
 #define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
 
 /* Common PXA2xx bits first */
-#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
+#define SSCR0_DSS	GENMASK(3, 0)	/* Data Size Select (mask) */
 #define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
-#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
+#define SSCR0_FRF	GENMASK(5, 4)	/* FRame Format (mask) */
 #define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
 #define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
 #define SSCR0_National	(0x2 << 4)	/* National Microwire */
-#define SSCR0_ECS	(1 << 6)	/* External clock select */
-#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+#define SSCR0_ECS	BIT(6)		/* External clock select */
+#define SSCR0_SSE	BIT(7)		/* Synchronous Serial Port Enable */
 #define SSCR0_SCR(x)	((x) << 8)	/* Serial Clock Rate (mask) */
 
 /* PXA27x, PXA3xx */
-#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
-#define SSCR0_NCS	(1 << 21)	/* Network clock select */
-#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
-#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
-#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
+#define SSCR0_EDSS	BIT(20)		/* Extended data size select */
+#define SSCR0_NCS	BIT(21)		/* Network clock select */
+#define SSCR0_RIM	BIT(22)		/* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM	BIT(23)		/* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC	GENMASK(26, 24)	/* Frame rate divider control (mask) */
 #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
-#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
-#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
-
-
-#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
-#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
-#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
-
-#define SSSR_ALT_FRM_MASK	3	/* Masks the SFRM signal number */
-#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
-#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
-#define SSSR_BSY	(1 << 4)	/* SSP Busy */
-#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
-#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
-#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
+#define SSCR0_FPCKE	BIT(29)		/* FIFO packing enable */
+#define SSCR0_ACS	BIT(30)		/* Audio clock select */
+#define SSCR0_MOD	BIT(31)		/* Mode (normal or network) */
+
+#define SSCR1_RIE	BIT(0)		/* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE	BIT(1)		/* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM	BIT(2)		/* Loop-Back Mode */
+#define SSCR1_SPO	BIT(3)		/* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH	BIT(4)		/* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS	BIT(5)		/* Microwire Transmit Data Size */
+
+#define SSSR_ALT_FRM_MASK	GENMASK(1, 0)	/* Masks the SFRM signal number */
+#define SSSR_TNF		BIT(2)		/* Transmit FIFO Not Full */
+#define SSSR_RNE		BIT(3)		/* Receive FIFO Not Empty */
+#define SSSR_BSY		BIT(4)		/* SSP Busy */
+#define SSSR_TFS		BIT(5)		/* Transmit FIFO Service Request */
+#define SSSR_RFS		BIT(6)		/* Receive FIFO Service Request */
+#define SSSR_ROR		BIT(7)		/* Receive FIFO Overrun */
 
 #define RX_THRESH_DFLT	8
 #define TX_THRESH_DFLT	8
 
-#define SSSR_TFL_MASK	(0xf << 8)	/* Transmit FIFO Level mask */
-#define SSSR_RFL_MASK	(0xf << 12)	/* Receive FIFO Level mask */
+#define SSSR_TFL_MASK	GENMASK(11, 8)	/* Transmit FIFO Level mask */
+#define SSSR_RFL_MASK	GENMASK(15, 12)	/* Receive FIFO Level mask */
 
-#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TFT	GENMASK(9, 6)	/* Transmit FIFO Threshold (mask) */
 #define SSCR1_TxTresh(x) (((x) - 1) << 6)	/* level [1..16] */
-#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RFT	GENMASK(13, 10)	/* Receive FIFO Threshold (mask) */
 #define SSCR1_RxTresh(x) (((x) - 1) << 10)	/* level [1..16] */
 
 #define RX_THRESH_CE4100_DFLT	2
 #define TX_THRESH_CE4100_DFLT	2
 
-#define CE4100_SSSR_TFL_MASK	(0x3 << 8)	/* Transmit FIFO Level mask */
-#define CE4100_SSSR_RFL_MASK	(0x3 << 12)	/* Receive FIFO Level mask */
+#define CE4100_SSSR_TFL_MASK	GENMASK(9, 8)	/* Transmit FIFO Level mask */
+#define CE4100_SSSR_RFL_MASK	GENMASK(13, 12)	/* Receive FIFO Level mask */
 
-#define CE4100_SSCR1_TFT	(0x000000c0)	/* Transmit FIFO Threshold (mask) */
+#define CE4100_SSCR1_TFT	GENMASK(7, 6)	/* Transmit FIFO Threshold (mask) */
 #define CE4100_SSCR1_TxTresh(x) (((x) - 1) << 6)	/* level [1..4] */
-#define CE4100_SSCR1_RFT	(0x00000c00)	/* Receive FIFO Threshold (mask) */
+#define CE4100_SSCR1_RFT	GENMASK(11, 10)	/* Receive FIFO Threshold (mask) */
 #define CE4100_SSCR1_RxTresh(x) (((x) - 1) << 10)	/* level [1..4] */
 
 /* QUARK_X1000 SSCR0 bit definition */
-#define QUARK_X1000_SSCR0_DSS		(0x1F << 0)	/* Data Size Select (mask) */
+#define QUARK_X1000_SSCR0_DSS		GENMASK(4, 0)	/* Data Size Select (mask) */
 #define QUARK_X1000_SSCR0_DataSize(x)	((x) - 1)	/* Data Size Select [4..32] */
-#define QUARK_X1000_SSCR0_FRF		(0x3 << 5)	/* FRame Format (mask) */
+#define QUARK_X1000_SSCR0_FRF		GENMASK(6, 5)	/* FRame Format (mask) */
 #define QUARK_X1000_SSCR0_Motorola	(0x0 << 5)	/* Motorola's Serial Peripheral Interface (SPI) */
 
 #define RX_THRESH_QUARK_X1000_DFLT	1
 #define TX_THRESH_QUARK_X1000_DFLT	16
 
-#define QUARK_X1000_SSSR_TFL_MASK	(0x1F << 8)	/* Transmit FIFO Level mask */
-#define QUARK_X1000_SSSR_RFL_MASK	(0x1F << 13)	/* Receive FIFO Level mask */
+#define QUARK_X1000_SSSR_TFL_MASK	GENMASK(12, 8)	/* Transmit FIFO Level mask */
+#define QUARK_X1000_SSSR_RFL_MASK	GENMASK(17, 13)	/* Receive FIFO Level mask */
 
-#define QUARK_X1000_SSCR1_TFT	(0x1F << 6)	/* Transmit FIFO Threshold (mask) */
+#define QUARK_X1000_SSCR1_TFT	GENMASK(10, 6)	/* Transmit FIFO Threshold (mask) */
 #define QUARK_X1000_SSCR1_TxTresh(x) (((x) - 1) << 6)	/* level [1..32] */
-#define QUARK_X1000_SSCR1_RFT	(0x1F << 11)	/* Receive FIFO Threshold (mask) */
+#define QUARK_X1000_SSCR1_RFT	GENMASK(15, 11)	/* Receive FIFO Threshold (mask) */
 #define QUARK_X1000_SSCR1_RxTresh(x) (((x) - 1) << 11)	/* level [1..32] */
-#define QUARK_X1000_SSCR1_STRF	(1 << 17)	/* Select FIFO or EFWR */
-#define QUARK_X1000_SSCR1_EFWR	(1 << 16)	/* Enable FIFO Write/Read */
+#define QUARK_X1000_SSCR1_EFWR	BIT(16)		/* Enable FIFO Write/Read */
+#define QUARK_X1000_SSCR1_STRF	BIT(17)		/* Select FIFO or EFWR */
 
 /* extra bits in PXA255, PXA26x and PXA27x SSP ports */
 #define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
 #define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
-#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
-#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
-#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
-#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
-#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
-#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
-#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
-#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
-#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
-#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
-#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
-#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
-#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interrupt Enable */
-#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
-#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
-#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
-
-#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
-#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
-#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
-#define SSSR_EOC		(1 << 20)	/* End Of Chain */
-#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
-#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
 
+#define SSCR1_EFWR		BIT(14)		/* Enable FIFO Write/Read */
+#define SSCR1_STRF		BIT(15)		/* Select FIFO or EFWR */
+#define SSCR1_IFS		BIT(16)		/* Invert Frame Signal */
+#define SSCR1_PINTE		BIT(18)		/* Peripheral Trailing Byte Interrupt Enable */
+#define SSCR1_TINTE		BIT(19)		/* Receiver Time-out Interrupt enable */
+#define SSCR1_RSRE		BIT(20)		/* Receive Service Request Enable */
+#define SSCR1_TSRE		BIT(21)		/* Transmit Service Request Enable */
+#define SSCR1_TRAIL		BIT(22)		/* Trailing Byte */
+#define SSCR1_RWOT		BIT(23)		/* Receive Without Transmit */
+#define SSCR1_SFRMDIR		BIT(24)		/* Frame Direction */
+#define SSCR1_SCLKDIR		BIT(25)		/* Serial Bit Rate Clock Direction */
+#define SSCR1_ECRB		BIT(26)		/* Enable Clock request B */
+#define SSCR1_ECRA		BIT(27)		/* Enable Clock Request A */
+#define SSCR1_SCFR		BIT(28)		/* Slave Clock free Running */
+#define SSCR1_EBCEI		BIT(29)		/* Enable Bit Count Error interrupt */
+#define SSCR1_TTE		BIT(30)		/* TXD Tristate Enable */
+#define SSCR1_TTELP		BIT(31)		/* TXD Tristate Enable Last Phase */
+
+#define SSSR_PINT		BIT(18)		/* Peripheral Trailing Byte Interrupt */
+#define SSSR_TINT		BIT(19)		/* Receiver Time-out Interrupt */
+#define SSSR_EOC		BIT(20)		/* End Of Chain */
+#define SSSR_TUR		BIT(21)		/* Transmit FIFO Under Run */
+#define SSSR_CSS		BIT(22)		/* Clock Synchronisation Status */
+#define SSSR_BCE		BIT(23)		/* Bit Count Error */
 
 #define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
-#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
-#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
+#define SSPSP_SFRMP		BIT(2)		/* Serial Frame Polarity */
+#define SSPSP_ETDS		BIT(3)		/* End of Transfer data State */
 #define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
 #define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
 #define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
 #define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
 #define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
-#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
+#define SSPSP_FSRT		BIT(25)		/* Frame Sync Relative Timing */
 
 /* PXA3xx */
 #define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
 #define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
 #define SSPSP_TIMING_MASK	(0x7f8001f0)
 
-#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
-#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
 #define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
 #define SSACD_ACDS_1		(0)
 #define SSACD_ACDS_2		(1)
@@ -174,18 +175,24 @@
 #define SSACD_ACDS_8		(3)
 #define SSACD_ACDS_16		(4)
 #define SSACD_ACDS_32		(5)
+#define SSACD_SCDB		BIT(3)		/* SSPSYSCLK Divider Bypass */
 #define SSACD_SCDB_4X		(0)
 #define SSACD_SCDB_1X		(1)
-#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
+#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
+#define SSACD_SCDX8		BIT(7)		/* SYSCLK division ratio select */
 
 /* LPSS SSP */
 #define SSITF			0x44		/* TX FIFO trigger level */
+#define SSITF_TxHiThresh(x)	(((x) - 1) << 0)
 #define SSITF_TxLoThresh(x)	(((x) - 1) << 8)
-#define SSITF_TxHiThresh(x)	((x) - 1)
 
 #define SSIRF			0x48		/* RX FIFO trigger level */
 #define SSIRF_RxThresh(x)	((x) - 1)
 
+/* LPT/WPT SSP */
+#define SSCR2		(0x40)	/* SSP Command / Status 2 */
+#define SSPSP2		(0x44)	/* SSP Programmable Serial Protocol 2 */
+
 enum pxa_ssp_type {
 	SSP_UNDEFINED = 0,
 	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */