summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2016-10-29 17:28:45 -0400
committerDavid S. Miller <davem@davemloft.net>2016-10-29 17:28:45 -0400
commit32ab0a38f0bd554cc45203ff4fdb6b0fdea6f025 (patch)
tree635d845480bff955d1be349258d16188a943147e /include
parent976990569360bcd7bb35f370c76904d109d20cc0 (diff)
parent514877182b537372352c14a0a50822572f66e831 (diff)
downloadlinux-32ab0a38f0bd554cc45203ff4fdb6b0fdea6f025.tar.bz2
Merge tag 'mac80211-next-for-davem-2016-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says: ==================== Among various cleanups and improvements, we have the following: * client FILS authentication support in mac80211 (Jouni) * AP/VLAN multicast improvements (Michael Braun) * config/advertising support for differing beacon intervals on multiple virtual interfaces (Purushottam Kushwaha, myself) * deprecate the old WDS mode for cfg80211-based drivers, the mode is hardly usable since it doesn't support any "modern" features like WPA encryption (2003), HT (2009) or VHT (2014), I'm not even sure WEP (introduced in 1997) could be done. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include')
-rw-r--r--include/linux/ieee80211.h26
-rw-r--r--include/net/cfg80211.h150
-rw-r--r--include/net/ieee80211_radiotap.h4
-rw-r--r--include/net/mac80211.h19
-rw-r--r--include/uapi/linux/nl80211.h69
5 files changed, 224 insertions, 44 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index a80516fd65c8..fe849329511a 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1576,6 +1576,9 @@ struct ieee80211_vht_operation {
#define WLAN_AUTH_SHARED_KEY 1
#define WLAN_AUTH_FT 2
#define WLAN_AUTH_SAE 3
+#define WLAN_AUTH_FILS_SK 4
+#define WLAN_AUTH_FILS_SK_PFS 5
+#define WLAN_AUTH_FILS_PK 6
#define WLAN_AUTH_LEAP 128
#define WLAN_AUTH_CHALLENGE_LEN 128
@@ -1960,6 +1963,26 @@ enum ieee80211_eid {
WLAN_EID_VENDOR_SPECIFIC = 221,
WLAN_EID_QOS_PARAMETER = 222,
+ WLAN_EID_CAG_NUMBER = 237,
+ WLAN_EID_AP_CSN = 239,
+ WLAN_EID_FILS_INDICATION = 240,
+ WLAN_EID_DILS = 241,
+ WLAN_EID_FRAGMENT = 242,
+ WLAN_EID_EXTENSION = 255
+};
+
+/* Element ID Extensions for Element ID 255 */
+enum ieee80211_eid_ext {
+ WLAN_EID_EXT_ASSOC_DELAY_INFO = 1,
+ WLAN_EID_EXT_FILS_REQ_PARAMS = 2,
+ WLAN_EID_EXT_FILS_KEY_CONFIRM = 3,
+ WLAN_EID_EXT_FILS_SESSION = 4,
+ WLAN_EID_EXT_FILS_HLP_CONTAINER = 5,
+ WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN = 6,
+ WLAN_EID_EXT_KEY_DELIVERY = 7,
+ WLAN_EID_EXT_FILS_WRAPPED_DATA = 8,
+ WLAN_EID_EXT_FILS_PUBLIC_KEY = 12,
+ WLAN_EID_EXT_FILS_NONCE = 13,
};
/* Action category code */
@@ -2073,6 +2096,9 @@ enum ieee80211_key_len {
#define IEEE80211_GCMP_MIC_LEN 16
#define IEEE80211_GCMP_PN_LEN 6
+#define FILS_NONCE_LEN 16
+#define FILS_MAX_KEK_LEN 64
+
/* Public action codes */
enum ieee80211_pub_actioncode {
WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index fe78f02a242e..c575583b50fb 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -772,6 +772,30 @@ struct cfg80211_csa_settings {
};
/**
+ * struct iface_combination_params - input parameters for interface combinations
+ *
+ * Used to pass interface combination parameters
+ *
+ * @num_different_channels: the number of different channels we want
+ * to use for verification
+ * @radar_detect: a bitmap where each bit corresponds to a channel
+ * width where radar detection is needed, as in the definition of
+ * &struct ieee80211_iface_combination.@radar_detect_widths
+ * @iftype_num: array with the number of interfaces of each interface
+ * type. The index is the interface type as specified in &enum
+ * nl80211_iftype.
+ * @new_beacon_int: set this to the beacon interval of a new interface
+ * that's not operating yet, if such is to be checked as part of
+ * the verification
+ */
+struct iface_combination_params {
+ int num_different_channels;
+ u8 radar_detect;
+ int iftype_num[NUM_NL80211_IFTYPES];
+ u32 new_beacon_int;
+};
+
+/**
* enum station_parameters_apply_mask - station parameter values to apply
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
* @STATION_PARAM_APPLY_CAPABILITY: apply new capability
@@ -1761,9 +1785,11 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
* @key_len: length of WEP key for shared key authentication
* @key_idx: index of WEP key for shared key authentication
* @key: WEP key for shared key authentication
- * @sae_data: Non-IE data to use with SAE or %NULL. This starts with
- * Authentication transaction sequence number field.
- * @sae_data_len: Length of sae_data buffer in octets
+ * @auth_data: Fields and elements in Authentication frames. This contains
+ * the authentication frame body (non-IE and IE data), excluding the
+ * Authentication algorithm number, i.e., starting at the Authentication
+ * transaction sequence number field.
+ * @auth_data_len: Length of auth_data buffer in octets
*/
struct cfg80211_auth_request {
struct cfg80211_bss *bss;
@@ -1772,8 +1798,8 @@ struct cfg80211_auth_request {
enum nl80211_auth_type auth_type;
const u8 *key;
u8 key_len, key_idx;
- const u8 *sae_data;
- size_t sae_data_len;
+ const u8 *auth_data;
+ size_t auth_data_len;
};
/**
@@ -1814,6 +1840,12 @@ enum cfg80211_assoc_req_flags {
* @ht_capa_mask: The bits of ht_capa which are to be used.
* @vht_capa: VHT capability override
* @vht_capa_mask: VHT capability mask indicating which fields to use
+ * @fils_kek: FILS KEK for protecting (Re)Association Request/Response frame or
+ * %NULL if FILS is not used.
+ * @fils_kek_len: Length of fils_kek in octets
+ * @fils_nonces: FILS nonces (part of AAD) for protecting (Re)Association
+ * Request/Response frame or %NULL if FILS is not used. This field starts
+ * with 16 octets of STA Nonce followed by 16 octets of AP Nonce.
*/
struct cfg80211_assoc_request {
struct cfg80211_bss *bss;
@@ -1825,6 +1857,9 @@ struct cfg80211_assoc_request {
struct ieee80211_ht_cap ht_capa;
struct ieee80211_ht_cap ht_capa_mask;
struct ieee80211_vht_cap vht_capa, vht_capa_mask;
+ const u8 *fils_kek;
+ size_t fils_kek_len;
+ const u8 *fils_nonces;
};
/**
@@ -2016,6 +2051,18 @@ struct cfg80211_connect_params {
};
/**
+ * enum cfg80211_connect_params_changed - Connection parameters being updated
+ *
+ * This enum provides information of all connect parameters that
+ * have to be updated as part of update_connect_params() call.
+ *
+ * @UPDATE_ASSOC_IES: Indicates whether association request IEs are updated
+ */
+enum cfg80211_connect_params_changed {
+ UPDATE_ASSOC_IES = BIT(0),
+};
+
+/**
* enum wiphy_params_flags - set_wiphy_params bitfield values
* @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
* @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
@@ -2536,9 +2583,18 @@ struct cfg80211_nan_func {
* cases, the result of roaming is indicated with a call to
* cfg80211_roamed() or cfg80211_roamed_bss().
* (invoked with the wireless_dev mutex held)
- * @disconnect: Disconnect from the BSS/ESS. Once done, call
- * cfg80211_disconnected().
+ * @update_connect_params: Update the connect parameters while connected to a
+ * BSS. The updated parameters can be used by driver/firmware for
+ * subsequent BSS selection (roaming) decisions and to form the
+ * Authentication/(Re)Association Request frames. This call does not
+ * request an immediate disassociation or reassociation with the current
+ * BSS, i.e., this impacts only subsequent (re)associations. The bits in
+ * changed are defined in &enum cfg80211_connect_params_changed.
* (invoked with the wireless_dev mutex held)
+ * @disconnect: Disconnect from the BSS/ESS or stop connection attempts if
+ * connection is in progress. Once done, call cfg80211_disconnected() in
+ * case connection was already established (invoked with the
+ * wireless_dev mutex held), otherwise call cfg80211_connect_timeout().
*
* @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
* cfg80211_ibss_joined(), also call that function when changing BSSID due
@@ -2706,6 +2762,8 @@ struct cfg80211_nan_func {
* @nan_change_conf: changes NAN configuration. The changed parameters must
* be specified in @changes (using &enum cfg80211_nan_conf_changes);
* All other parameters must be ignored.
+ *
+ * @set_multicast_to_unicast: configure multicast to unicast conversion for BSS
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2820,6 +2878,10 @@ struct cfg80211_ops {
int (*connect)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_connect_params *sme);
+ int (*update_connect_params)(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct cfg80211_connect_params *sme,
+ u32 changed);
int (*disconnect)(struct wiphy *wiphy, struct net_device *dev,
u16 reason_code);
@@ -2982,6 +3044,10 @@ struct cfg80211_ops {
struct wireless_dev *wdev,
struct cfg80211_nan_conf *conf,
u32 changes);
+
+ int (*set_multicast_to_unicast)(struct wiphy *wiphy,
+ struct net_device *dev,
+ const bool enabled);
};
/*
@@ -3080,6 +3146,12 @@ struct ieee80211_iface_limit {
* only in special cases.
* @radar_detect_widths: bitmap of channel widths supported for radar detection
* @radar_detect_regions: bitmap of regions supported for radar detection
+ * @beacon_int_min_gcd: This interface combination supports different
+ * beacon intervals.
+ * = 0 - all beacon intervals for different interface must be same.
+ * > 0 - any beacon interval for the interface part of this combination AND
+ * *GCD* of all beacon intervals from beaconing interfaces of this
+ * combination must be greater or equal to this value.
*
* With this structure the driver can describe which interface
* combinations it supports concurrently.
@@ -3138,6 +3210,7 @@ struct ieee80211_iface_combination {
bool beacon_int_infra_match;
u8 radar_detect_widths;
u8 radar_detect_regions;
+ u32 beacon_int_min_gcd;
};
struct ieee80211_txrx_stypes {
@@ -3745,8 +3818,8 @@ struct cfg80211_cached_keys;
* @beacon_interval: beacon interval used on this device for transmitting
* beacons, 0 when not valid
* @address: The address for this device, valid only if @netdev is %NULL
- * @p2p_started: true if this is a P2P Device that has been started
- * @nan_started: true if this is a NAN interface that has been started
+ * @is_running: true if this is a non-netdev device that has been started, e.g.
+ * the P2P Device.
* @cac_started: true if DFS channel availability check has been started
* @cac_start_time: timestamp (jiffies) when the dfs state was entered.
* @cac_time_ms: CAC time in ms
@@ -3778,7 +3851,7 @@ struct wireless_dev {
struct mutex mtx;
- bool use_4addr, p2p_started, nan_started;
+ bool use_4addr, is_running;
u8 address[ETH_ALEN] __aligned(sizeof(u16));
@@ -3835,6 +3908,13 @@ static inline u8 *wdev_address(struct wireless_dev *wdev)
return wdev->address;
}
+static inline bool wdev_running(struct wireless_dev *wdev)
+{
+ if (wdev->netdev)
+ return netif_running(wdev->netdev);
+ return wdev->is_running;
+}
+
/**
* wdev_priv - return wiphy priv from wireless_dev
*
@@ -4140,6 +4220,27 @@ static inline const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len)
}
/**
+ * cfg80211_find_ext_ie - find information element with EID Extension in data
+ *
+ * @ext_eid: element ID Extension
+ * @ies: data consisting of IEs
+ * @len: length of data
+ *
+ * Return: %NULL if the extended element ID could not be found or if
+ * the element is invalid (claims to be longer than the given
+ * data), or a pointer to the first byte of the requested
+ * element, that is the byte containing the element ID.
+ *
+ * Note: There are no checks on the element length other than
+ * having to fit into the given data.
+ */
+static inline const u8 *cfg80211_find_ext_ie(u8 ext_eid, const u8 *ies, int len)
+{
+ return cfg80211_find_ie_match(WLAN_EID_EXTENSION, ies, len,
+ &ext_eid, 1, 2);
+}
+
+/**
* cfg80211_find_vendor_ie - find vendor specific information element in data
*
* @oui: vendor OUI
@@ -4539,7 +4640,8 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr);
* moves to cfg80211 in this call
* @buf: authentication frame (header + body)
* @len: length of the frame data
- * @uapsd_queues: bitmap of ACs configured to uapsd. -1 if n/a.
+ * @uapsd_queues: bitmap of queues configured for uapsd. Same format
+ * as the AC bitmap in the QoS info field
*
* After being asked to associate via cfg80211_ops::assoc() the driver must
* call either this function or cfg80211_auth_timeout().
@@ -5575,36 +5677,20 @@ unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy);
* cfg80211_check_combinations - check interface combinations
*
* @wiphy: the wiphy
- * @num_different_channels: the number of different channels we want
- * to use for verification
- * @radar_detect: a bitmap where each bit corresponds to a channel
- * width where radar detection is needed, as in the definition of
- * &struct ieee80211_iface_combination.@radar_detect_widths
- * @iftype_num: array with the numbers of interfaces of each interface
- * type. The index is the interface type as specified in &enum
- * nl80211_iftype.
+ * @params: the interface combinations parameter
*
* This function can be called by the driver to check whether a
* combination of interfaces and their types are allowed according to
* the interface combinations.
*/
int cfg80211_check_combinations(struct wiphy *wiphy,
- const int num_different_channels,
- const u8 radar_detect,
- const int iftype_num[NUM_NL80211_IFTYPES]);
+ struct iface_combination_params *params);
/**
* cfg80211_iter_combinations - iterate over matching combinations
*
* @wiphy: the wiphy
- * @num_different_channels: the number of different channels we want
- * to use for verification
- * @radar_detect: a bitmap where each bit corresponds to a channel
- * width where radar detection is needed, as in the definition of
- * &struct ieee80211_iface_combination.@radar_detect_widths
- * @iftype_num: array with the numbers of interfaces of each interface
- * type. The index is the interface type as specified in &enum
- * nl80211_iftype.
+ * @params: the interface combinations parameter
* @iter: function to call for each matching combination
* @data: pointer to pass to iter function
*
@@ -5613,9 +5699,7 @@ int cfg80211_check_combinations(struct wiphy *wiphy,
* purposes.
*/
int cfg80211_iter_combinations(struct wiphy *wiphy,
- const int num_different_channels,
- const u8 radar_detect,
- const int iftype_num[NUM_NL80211_IFTYPES],
+ struct iface_combination_params *params,
void (*iter)(const struct ieee80211_iface_combination *c,
void *data),
void *data);
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index ba07b9d8ed63..d0e7e3f8e67a 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -333,9 +333,9 @@ enum ieee80211_radiotap_type {
#define IEEE80211_RADIOTAP_TIMESTAMP_UNIT_NS 0x0003
#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_MASK 0x00F0
#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_BEGIN_MDPU 0x0000
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_MPDU 0x0010
+#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_PLCP_SIG_ACQ 0x0010
#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_PPDU 0x0020
-#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_PLCP_SIG_ACQ 0x0030
+#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_MPDU 0x0030
#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_UNKNOWN 0x00F0
#define IEEE80211_RADIOTAP_TIMESTAMP_FLAG_64BIT 0x00
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index a810dfcb83c2..b9b24abd9103 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1438,7 +1438,7 @@ enum ieee80211_vif_flags {
struct ieee80211_vif {
enum nl80211_iftype type;
struct ieee80211_bss_conf bss_conf;
- u8 addr[ETH_ALEN];
+ u8 addr[ETH_ALEN] __aligned(2);
bool p2p;
bool csa_active;
bool mu_mimo_owner;
@@ -1745,7 +1745,8 @@ struct ieee80211_sta_rates {
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *), size is determined in hw information.
* @uapsd_queues: bitmap of queues configured for uapsd. Only valid
- * if wme is supported.
+ * if wme is supported. The bits order is like in
+ * IEEE80211_WMM_IE_STA_QOSINFO_AC_*.
* @max_sp: max Service Period. Only valid if wme is supported.
* @bandwidth: current bandwidth the station can receive with
* @rx_nss: in HT/VHT, the maximum number of spatial streams the
@@ -2025,6 +2026,10 @@ struct ieee80211_txq {
* drivers, mac80211 packet loss mechanism will not be triggered and driver
* is completely depending on firmware event for station kickout.
*
+ * @IEEE80211_HW_SUPPORTS_TX_FRAG: Hardware does fragmentation by itself.
+ * The stack will not do fragmentation.
+ * The callback for @set_frag_threshold should be set as well.
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
@@ -2066,6 +2071,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_TX_AMSDU,
IEEE80211_HW_TX_FRAG_LIST,
IEEE80211_HW_REPORTS_LOW_ACK,
+ IEEE80211_HW_SUPPORTS_TX_FRAG,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
@@ -3093,8 +3099,9 @@ enum ieee80211_reconfig_type {
* The callback must be atomic.
*
* @set_frag_threshold: Configuration of fragmentation threshold. Assign this
- * if the device does fragmentation by itself; if this callback is
- * implemented then the stack will not do fragmentation.
+ * if the device does fragmentation by itself. Note that to prevent the
+ * stack from doing fragmentation IEEE80211_HW_SUPPORTS_TX_FRAG
+ * should be set as well.
* The callback can sleep.
*
* @set_rts_threshold: Configuration of RTS threshold (if device needs it)
@@ -4087,6 +4094,10 @@ void ieee80211_sta_pspoll(struct ieee80211_sta *sta);
* This must be used in conjunction with ieee80211_sta_ps_transition()
* and possibly ieee80211_sta_pspoll(); calls to all three must be
* serialized.
+ * %IEEE80211_NUM_TIDS can be passed as the tid if the tid is unknown.
+ * In this case, mac80211 will not check that this tid maps to an AC
+ * that is trigger enabled and assume that the caller did the proper
+ * checks.
*/
void ieee80211_sta_uapsd_trigger(struct ieee80211_sta *sta, u8 tid);
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 56368e9b4622..259c9c77fdc1 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -600,6 +600,20 @@
*
* @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
*
+ * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+ * multicast to unicast conversion. When enabled, all multicast packets
+ * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
+ * will be sent out to each station once with the destination (multicast)
+ * MAC address replaced by the station's MAC address. Note that this may
+ * break certain expectations of the receiver, e.g. the ability to drop
+ * unicast IP packets encapsulated in multicast L2 frames, or the ability
+ * to not send destination unreachable messages in such cases.
+ * This can only be toggled per BSS. Configure this on an interface of
+ * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
+ * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
+ * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
+ * command, the feature is disabled.
+ *
* @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
* mesh config parameters may be given.
* @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
@@ -874,6 +888,12 @@
* This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
* %NL80211_ATTR_COOKIE.
*
+ * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
+ * for subsequent roaming cases if the driver or firmware uses internal
+ * BSS selection. This command can be issued only while connected and it
+ * does not result in a change for the current association. Currently,
+ * only the %NL80211_ATTR_IE data is used and updated with this command.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1069,6 +1089,10 @@ enum nl80211_commands {
NL80211_CMD_CHANGE_NAN_CONFIG,
NL80211_CMD_NAN_MATCH,
+ NL80211_CMD_SET_MULTICAST_TO_UNICAST,
+
+ NL80211_CMD_UPDATE_CONNECT_PARAMS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1638,8 +1662,16 @@ enum nl80211_commands {
* the connection request from a station. nl80211_connect_failed_reason
* enum has different reasons of connection failure.
*
- * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
- * with the Authentication transaction sequence number field.
+ * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
+ * This contains the authentication frame body (non-IE and IE data),
+ * excluding the Authentication algorithm number, i.e., starting at the
+ * Authentication transaction sequence number field. It is used with
+ * authentication algorithms that need special fields to be added into
+ * the frames (SAE and FILS). Currently, only the SAE cases use the
+ * initial two fields (Authentication transaction sequence number and
+ * Status code). However, those fields are included in the attribute data
+ * for all authentication algorithms to keep the attribute definition
+ * consistent.
*
* @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
* association request when used with NL80211_CMD_NEW_STATION)
@@ -1936,6 +1968,14 @@ enum nl80211_commands {
* attribute.
* @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
* See &enum nl80211_nan_match_attributes.
+ * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
+ * protection.
+ * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
+ * Request/Response frame protection. This attribute contains the 16 octet
+ * STA Nonce followed by 16 octets of AP Nonce.
+ *
+ * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
+ * packets should be send out as unicast to all stations (flag attribute).
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2195,7 +2235,7 @@ enum nl80211_attrs {
NL80211_ATTR_CONN_FAILED_REASON,
- NL80211_ATTR_SAE_DATA,
+ NL80211_ATTR_AUTH_DATA,
NL80211_ATTR_VHT_CAPABILITY,
@@ -2336,6 +2376,11 @@ enum nl80211_attrs {
NL80211_ATTR_NAN_FUNC,
NL80211_ATTR_NAN_MATCH,
+ NL80211_ATTR_FILS_KEK,
+ NL80211_ATTR_FILS_NONCES,
+
+ NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2347,6 +2392,7 @@ enum nl80211_attrs {
#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
+#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
/*
* Allow user space programs to use #ifdef on new attributes by defining them
@@ -3660,6 +3706,9 @@ enum nl80211_bss_status {
* @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
* @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
* @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
+ * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
+ * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
+ * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
* @__NL80211_AUTHTYPE_NUM: internal
* @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
* @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
@@ -3672,6 +3721,9 @@ enum nl80211_auth_type {
NL80211_AUTHTYPE_FT,
NL80211_AUTHTYPE_NETWORK_EAP,
NL80211_AUTHTYPE_SAE,
+ NL80211_AUTHTYPE_FILS_SK,
+ NL80211_AUTHTYPE_FILS_SK_PFS,
+ NL80211_AUTHTYPE_FILS_PK,
/* keep last */
__NL80211_AUTHTYPE_NUM,
@@ -4280,6 +4332,9 @@ enum nl80211_iface_limit_attrs {
* of supported channel widths for radar detection.
* @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
* of supported regulatory regions for radar detection.
+ * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
+ * different beacon intervals supported by all the interface combinations
+ * in this group (if not present, all beacon intervals be identical).
* @NUM_NL80211_IFACE_COMB: number of attributes
* @MAX_NL80211_IFACE_COMB: highest attribute number
*
@@ -4287,8 +4342,8 @@ enum nl80211_iface_limit_attrs {
* limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
* => allows an AP and a STA that must match BIs
*
- * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
- * => allows 8 of AP/GO
+ * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
+ * => allows 8 of AP/GO that can have BI gcd >= min gcd
*
* numbers = [ #{STA} <= 2 ], channels = 2, max = 2
* => allows two STAs on different channels
@@ -4314,6 +4369,7 @@ enum nl80211_if_combination_attrs {
NL80211_IFACE_COMB_NUM_CHANNELS,
NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
+ NL80211_IFACE_COMB_BI_MIN_GCD,
/* keep last */
NUM_NL80211_IFACE_COMB,
@@ -4634,6 +4690,8 @@ enum nl80211_feature_flags {
* configuration (AP/mesh) with HT rates.
* @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
* configuration (AP/mesh) with VHT rates.
+ * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
+ * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4648,6 +4706,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
NL80211_EXT_FEATURE_BEACON_RATE_HT,
NL80211_EXT_FEATURE_BEACON_RATE_VHT,
+ NL80211_EXT_FEATURE_FILS_STA,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,