wanrouter: delete now orphaned header content, files/drivers

The wanrouter support was identified earlier as unused for years,
and so the previous commit totally decoupled it from the kernel,
leaving the related wanrouter files present, but totally inert.

Here we take the final step in that cleanup, by doing a wholesale
removal of these files.  The two step process is used so that the
large deletion is decoupled from the git history of files that we
still care about.

The drivers deleted here all were dependent on the Kconfig setting
CONFIG_WAN_ROUTER_DRIVERS.

A stub wanrouter.h header (kernel & uapi) are left behind so that
drivers/isdn/i4l/isdn_x25iface.c continues to compile, and so that
we don't accidentally break userspace that expected these defines.

Cc: Joe Perches <joe@perches.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

4 files changed, 8 insertions, 703 deletions

diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h
deleted file mode 100644
index b88f7f428e58..000000000000
--- a/include/linux/cyclomx.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef	_CYCLOMX_H
-#define	_CYCLOMX_H
-/*
-* cyclomx.h	Cyclom 2X WAN Link Driver.
-*		User-level API definitions.
-*
-* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on wanpipe.h by Gene Kozin <genek@compuserve.com>
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* 2000/07/13    acme		remove crap #if KERNEL_VERSION > blah
-* 2000/01/21    acme            rename cyclomx_open to cyclomx_mod_inc_use_count
-*                               and cyclomx_close to cyclomx_mod_dec_use_count
-* 1999/05/19	acme		wait_queue_head_t wait_stats(support for 2.3.*)
-* 1999/01/03	acme		judicious use of data types
-* 1998/12/27	acme		cleanup: PACKED not needed
-* 1998/08/08	acme		Version 0.0.1
-*/
-
-#include <linux/wanrouter.h>
-#include <linux/spinlock.h>
-
-#ifdef	__KERNEL__
-/* Kernel Interface */
-
-#include <linux/cycx_drv.h>	/* Cyclom 2X support module API definitions */
-#include <linux/cycx_cfm.h>	/* Cyclom 2X firmware module definitions */
-#ifdef CONFIG_CYCLOMX_X25
-#include <linux/cycx_x25.h>
-#endif
-
-/* Adapter Data Space.
- * This structure is needed because we handle multiple cards, otherwise
- * static data would do it.
- */
-struct cycx_device {
-	char devname[WAN_DRVNAME_SZ + 1];/* card name */
-	struct cycx_hw hw;		/* hardware configuration */
-	struct wan_device wandev;	/* WAN device data space */
-	u32 state_tick;			/* link state timestamp */
-	spinlock_t lock;
-	char in_isr;			/* interrupt-in-service flag */
-	char buff_int_mode_unbusy;      /* flag for carrying out dev_tint */
-	wait_queue_head_t wait_stats;  /* to wait for the STATS indication */
-	void __iomem *mbox;			/* -> mailbox */
-	void (*isr)(struct cycx_device* card);	/* interrupt service routine */
-	int (*exec)(struct cycx_device* card, void* u_cmd, void* u_data);
-	union {
-#ifdef CONFIG_CYCLOMX_X25
-		struct { /* X.25 specific data */
-			u32 lo_pvc;
-			u32 hi_pvc;
-			u32 lo_svc;
-			u32 hi_svc;
-			struct cycx_x25_stats stats;
-			spinlock_t lock;
-			u32 connection_keys;
-		} x;
-#endif
-	} u;
-};
-
-/* Public Functions */
-void cycx_set_state(struct cycx_device *card, int state);
-
-#ifdef CONFIG_CYCLOMX_X25
-int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf);
-#endif
-#endif	/* __KERNEL__ */
-#endif	/* _CYCLOMX_H */
diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h
deleted file mode 100644
index 12fe6b0bfcff..000000000000
--- a/include/linux/cycx_drv.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-* cycx_drv.h	CYCX Support Module.  Kernel API Definitions.
-*
-* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdladrv.h by Gene Kozin <genek@compuserve.com>
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* 1999/10/23	acme		cycxhw_t cleanup
-* 1999/01/03	acme		more judicious use of data types...
-*				uclong, ucchar, etc deleted, the u8, u16, u32
-*				types are the portable way to go.
-* 1999/01/03	acme		judicious use of data types... u16, u32, etc
-* 1998/12/26	acme	 	FIXED_BUFFERS, CONF_OFFSET,
-*                               removal of cy_read{bwl}
-* 1998/08/08	acme	 	Initial version.
-*/
-#ifndef	_CYCX_DRV_H
-#define	_CYCX_DRV_H
-
-#define	CYCX_WINDOWSIZE	0x4000	/* default dual-port memory window size */
-#define	GEN_CYCX_INTR	0x02
-#define	RST_ENABLE	0x04
-#define	START_CPU	0x06
-#define	RST_DISABLE	0x08
-#define	FIXED_BUFFERS	0x08
-#define	TEST_PATTERN	0xaa55
-#define	CMD_OFFSET	0x20
-#define CONF_OFFSET     0x0380
-#define	RESET_OFFSET	0x3c00	/* For reset file load */
-#define	DATA_OFFSET	0x0100	/* For code and data files load */
-#define	START_OFFSET	0x3ff0	/* 80186 starts here */
-
-/**
- *	struct cycx_hw - Adapter hardware configuration
- *	@fwid - firmware ID
- *	@irq - interrupt request level
- *	@dpmbase - dual-port memory base
- *	@dpmsize - dual-port memory size
- *	@reserved - reserved for future use
- */
-struct cycx_hw {
-	u32 fwid;
-	int irq;
-	void __iomem *dpmbase;
-	u32 dpmsize;
-	u32 reserved[5];
-};
-
-/* Function Prototypes */
-extern int cycx_setup(struct cycx_hw *hw, void *sfm, u32 len, unsigned long base);
-extern int cycx_down(struct cycx_hw *hw);
-extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
-extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
-extern int cycx_exec(void __iomem *addr);
-
-extern void cycx_intr(struct cycx_hw *hw);
-#endif	/* _CYCX_DRV_H */
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
index cec4b4159767..8198a63cf459 100644
--- a/include/linux/wanrouter.h
+++ b/include/linux/wanrouter.h
@@ -1,129 +1,10 @@
-/*****************************************************************************
-* wanrouter.h	Definitions for the WAN Multiprotocol Router Module.
-*		This module provides API and common services for WAN Link
-*		Drivers and is completely hardware-independent.
-*
-* Author: 	Nenad Corbic <ncorbic@sangoma.com>
-*		Gideon Hack 	
-* Additions:	Arnaldo Melo
-*
-* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* Jul 21, 2000  Nenad Corbic	Added WAN_FT1_READY State
-* Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
-* Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
-* Oct 04, 1999  Nenad Corbic 	Updated for 2.1.0 release
-* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
-* May 23, 1999	Arnaldo Melo	Added local_addr to wanif_conf_t
-*				WAN_DISCONNECTING state added
-* Jul 20, 1998	David Fong	Added Inverse ARP options to 'wanif_conf_t'
-* Jun 12, 1998	David Fong	Added Cisco HDLC support.
-* Dec 16, 1997	Jaspreet Singh	Moved 'enable_IPX' and 'network_number' to
-*				'wanif_conf_t'
-* Dec 05, 1997	Jaspreet Singh	Added 'pap', 'chap' to 'wanif_conf_t'
-*				Added 'authenticator' to 'wan_ppp_conf_t'
-* Nov 06, 1997	Jaspreet Singh	Changed Router Driver version to 1.1 from 1.0
-* Oct 20, 1997	Jaspreet Singh	Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
-*				Added 'enable_IPX' and 'network_number' to 
-*				'wan_device_t'.  Also added defines for
-*				UDP PACKET TYPE, Interrupt test, critical values
-*				for RACE conditions.
-* Oct 05, 1997	Jaspreet Singh	Added 'dlci_num' and 'dlci[100]' to 
-*				'wan_fr_conf_t' to configure a list of dlci(s)
-*				for a NODE 
-* Jul 07, 1997	Jaspreet Singh	Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
-* May 29, 1997 	Jaspreet Singh	Added 'tx_int_enabled' to 'wan_device_t'
-* May 21, 1997	Jaspreet Singh	Added 'udp_port' to 'wan_device_t'
-* Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
-* Jan 16, 1997	Gene Kozin	router_devlist made public
-* Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
-*****************************************************************************/
+/*
+ * wanrouter.h	Legacy declarations kept around until X25 is removed
+ */
+
 #ifndef	_ROUTER_H
 #define	_ROUTER_H
 
 #include <uapi/linux/wanrouter.h>
 
-/****** Kernel Interface ****************************************************/
-
-#include <linux/fs.h>		/* support for device drivers */
-#include <linux/proc_fs.h>	/* proc filesystem pragmatics */
-#include <linux/netdevice.h>	/* support for network drivers */
-#include <linux/spinlock.h>     /* Support for SMP Locking */
-
-/*----------------------------------------------------------------------------
- * WAN device data space.
- */
-struct wan_device {
-	unsigned magic;			/* magic number */
-	char* name;			/* -> WAN device name (ASCIIZ) */
-	void* private;			/* -> driver private data */
-	unsigned config_id;		/* Configuration ID */
-					/****** hardware configuration ******/
-	unsigned ioport;		/* adapter I/O port base #1 */
-	char S514_cpu_no[1];		/* PCI CPU Number */
-	unsigned char S514_slot_no;	/* PCI Slot Number */
-	unsigned long maddr;		/* dual-port memory address */
-	unsigned msize;			/* dual-port memory size */
-	int irq;			/* interrupt request level */
-	int dma;			/* DMA request level */
-	unsigned bps;			/* data transfer rate */
-	unsigned mtu;			/* max physical transmit unit size */
-	unsigned udp_port;              /* UDP port for management */
-        unsigned char ttl;		/* Time To Live for UDP security */
-	unsigned enable_tx_int; 	/* Transmit Interrupt enabled or not */
-	char interface;			/* RS-232/V.35, etc. */
-	char clocking;			/* external/internal */
-	char line_coding;		/* NRZ/NRZI/FM0/FM1, etc. */
-	char station;			/* DTE/DCE, primary/secondary, etc. */
-	char connection;		/* permanent/switched/on-demand */
-	char signalling;		/* Signalling RS232 or V35 */
-	char read_mode;			/* read mode: Polling or interrupt */
-	char new_if_cnt;                /* Number of interfaces per wanpipe */ 
-	char del_if_cnt;		/* Number of times del_if() gets called */
-	unsigned char piggyback;        /* Piggibacking a port */
-	unsigned hw_opt[4];		/* other hardware options */
-					/****** status and statistics *******/
-	char state;			/* device state */
-	char api_status;		/* device api status */
-	struct net_device_stats stats; 	/* interface statistics */
-	unsigned reserved[16];		/* reserved for future use */
-	unsigned long critical;		/* critical section flag */
-	spinlock_t lock;                /* Support for SMP Locking */
-
-					/****** device management methods ***/
-	int (*setup) (struct wan_device *wandev, wandev_conf_t *conf);
-	int (*shutdown) (struct wan_device *wandev);
-	int (*update) (struct wan_device *wandev);
-	int (*ioctl) (struct wan_device *wandev, unsigned cmd,
-		unsigned long arg);
-	int (*new_if)(struct wan_device *wandev, struct net_device *dev,
-		      wanif_conf_t *conf);
-	int (*del_if)(struct wan_device *wandev, struct net_device *dev);
-					/****** maintained by the router ****/
-	struct wan_device* next;	/* -> next device */
-	struct net_device* dev;		/* list of network interfaces */
-	unsigned ndev;			/* number of interfaces */
-	struct proc_dir_entry *dent;	/* proc filesystem entry */
-};
-
-/* Public functions available for device drivers */
-extern int register_wan_device(struct wan_device *wandev);
-extern int unregister_wan_device(char *name);
-
-/* Proc interface functions. These must not be called by the drivers! */
-extern int wanrouter_proc_init(void);
-extern void wanrouter_proc_cleanup(void);
-extern int wanrouter_proc_add(struct wan_device *wandev);
-extern int wanrouter_proc_delete(struct wan_device *wandev);
-extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-
-/* Public Data */
-/* list of registered devices */
-extern struct wan_device *wanrouter_router_devlist;
-
 #endif	/* _ROUTER_H */
diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h
index 7617df2833d5..498d6c12c666 100644
--- a/include/uapi/linux/wanrouter.h
+++ b/include/uapi/linux/wanrouter.h
@@ -1,363 +1,9 @@
-/*****************************************************************************
-* wanrouter.h	Definitions for the WAN Multiprotocol Router Module.
-*		This module provides API and common services for WAN Link
-*		Drivers and is completely hardware-independent.
-*
-* Author: 	Nenad Corbic <ncorbic@sangoma.com>
-*		Gideon Hack 	
-* Additions:	Arnaldo Melo
-*
-* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* Jul 21, 2000  Nenad Corbic	Added WAN_FT1_READY State
-* Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
-* Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
-* Oct 04, 1999  Nenad Corbic 	Updated for 2.1.0 release
-* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
-* May 23, 1999	Arnaldo Melo	Added local_addr to wanif_conf_t
-*				WAN_DISCONNECTING state added
-* Jul 20, 1998	David Fong	Added Inverse ARP options to 'wanif_conf_t'
-* Jun 12, 1998	David Fong	Added Cisco HDLC support.
-* Dec 16, 1997	Jaspreet Singh	Moved 'enable_IPX' and 'network_number' to
-*				'wanif_conf_t'
-* Dec 05, 1997	Jaspreet Singh	Added 'pap', 'chap' to 'wanif_conf_t'
-*				Added 'authenticator' to 'wan_ppp_conf_t'
-* Nov 06, 1997	Jaspreet Singh	Changed Router Driver version to 1.1 from 1.0
-* Oct 20, 1997	Jaspreet Singh	Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
-*				Added 'enable_IPX' and 'network_number' to 
-*				'wan_device_t'.  Also added defines for
-*				UDP PACKET TYPE, Interrupt test, critical values
-*				for RACE conditions.
-* Oct 05, 1997	Jaspreet Singh	Added 'dlci_num' and 'dlci[100]' to 
-*				'wan_fr_conf_t' to configure a list of dlci(s)
-*				for a NODE 
-* Jul 07, 1997	Jaspreet Singh	Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
-* May 29, 1997 	Jaspreet Singh	Added 'tx_int_enabled' to 'wan_device_t'
-* May 21, 1997	Jaspreet Singh	Added 'udp_port' to 'wan_device_t'
-* Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
-* Jan 16, 1997	Gene Kozin	router_devlist made public
-* Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
-*****************************************************************************/
-
-#ifndef _UAPI_ROUTER_H
-#define _UAPI_ROUTER_H
-
-#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
-#define	ROUTER_VERSION	1		/* version number */
-#define	ROUTER_RELEASE	1		/* release (minor version) number */
-#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
-#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
-
-/* IOCTL codes for /proc/router/<device> entries (up to 255) */
-enum router_ioctls
-{
-	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
-	ROUTER_DOWN,				/* shut down device */
-	ROUTER_STAT,				/* get device status */
-	ROUTER_IFNEW,				/* add interface */
-	ROUTER_IFDEL,				/* delete interface */
-	ROUTER_IFSTAT,				/* get interface status */
-	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
-	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
-};
-
-/* identifiers for displaying proc file data for dual port adapters */
-#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
-#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
-
-/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
-#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
-#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
-#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
-#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
-#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
-#define	NLPID_Q933	0x08	/* CCITT Q.933 */
-
-/* Miscellaneous */
-#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
-#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
-#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
-#define USED_BY_FIELD	8	/* max length of the used by field */
-
-/* Defines for UDP PACKET TYPE */
-#define UDP_PTPIPE_TYPE 	0x01
-#define UDP_FPIPE_TYPE		0x02
-#define UDP_CPIPE_TYPE		0x03
-#define UDP_DRVSTATS_TYPE 	0x04
-#define UDP_INVALID_TYPE  	0x05
-
-/* Command return code */
-#define CMD_OK		0		/* normal firmware return code */
-#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
-
-/* UDP Packet Management */
-#define UDP_PKT_FRM_STACK	0x00
-#define UDP_PKT_FRM_NETWORK	0x01
-
-/* Maximum interrupt test counter */
-#define MAX_INTR_TEST_COUNTER	100
-
-/* Critical Values for RACE conditions*/
-#define CRITICAL_IN_ISR		0xA1
-#define CRITICAL_INTR_HANDLED	0xB1
-
-/****** Data Types **********************************************************/
-
-/*----------------------------------------------------------------------------
- * X.25-specific link-level configuration.
- */
-typedef struct wan_x25_conf
-{
-	unsigned lo_pvc;	/* lowest permanent circuit number */
-	unsigned hi_pvc;	/* highest permanent circuit number */
-	unsigned lo_svc;	/* lowest switched circuit number */
-	unsigned hi_svc;	/* highest switched circuit number */
-	unsigned hdlc_window;	/* HDLC window size (1..7) */
-	unsigned pkt_window;	/* X.25 packet window size (1..7) */
-	unsigned t1;		/* HDLC timer T1, sec (1..30) */
-	unsigned t2;		/* HDLC timer T2, sec (0..29) */
-	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
-	unsigned n2;		/* HDLC retransmission limit (1..30) */
-	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
-	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
-	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
-	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
-	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
-	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
-	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
-	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
-	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
-	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
-	unsigned x25_conf_opt;   /* User defined x25 config optoins */
-	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
-	unsigned char logging;   /* Control connection logging */  
-	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
-} wan_x25_conf_t;
-
-/*----------------------------------------------------------------------------
- * Frame relay specific link-level configuration.
- */
-typedef struct wan_fr_conf
-{
-	unsigned signalling;	/* local in-channel signalling type */
-	unsigned t391;		/* link integrity verification timer */
-	unsigned t392;		/* polling verification timer */
-	unsigned n391;		/* full status polling cycle counter */
-	unsigned n392;		/* error threshold counter */
-	unsigned n393;		/* monitored events counter */
-	unsigned dlci_num;	/* number of DLCs (access node) */
-	unsigned  dlci[100];    /* List of all DLCIs */
-} wan_fr_conf_t;
-
-/*----------------------------------------------------------------------------
- * PPP-specific link-level configuration.
- */
-typedef struct wan_ppp_conf
-{
-	unsigned restart_tmr;	/* restart timer */
-	unsigned auth_rsrt_tmr;	/* authentication timer */
-	unsigned auth_wait_tmr;	/* authentication timer */
-	unsigned mdm_fail_tmr;	/* modem failure timer */
-	unsigned dtr_drop_tmr;	/* DTR drop timer */
-	unsigned connect_tmout;	/* connection timeout */
-	unsigned conf_retry;	/* max. retry */
-	unsigned term_retry;	/* max. retry */
-	unsigned fail_retry;	/* max. retry */
-	unsigned auth_retry;	/* max. retry */
-	unsigned auth_options;	/* authentication opt. */
-	unsigned ip_options;	/* IP options */
-	char	authenticator;	/* AUTHENTICATOR or not */
-	char	ip_mode;	/* Static/Host/Peer */
-} wan_ppp_conf_t;
-
-/*----------------------------------------------------------------------------
- * CHDLC-specific link-level configuration.
- */
-typedef struct wan_chdlc_conf
-{
-	unsigned char ignore_dcd;	/* Protocol options:		*/
-	unsigned char ignore_cts;	/*  Ignore these to determine	*/
-	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
-	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-} wan_chdlc_conf_t;
-
-
-/*----------------------------------------------------------------------------
- * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
- */
-typedef struct wandev_conf
-{
-	unsigned magic;		/* magic number (for verification) */
-	unsigned config_id;	/* configuration structure identifier */
-				/****** hardware configuration ******/
-	unsigned ioport;	/* adapter I/O port base */
-	unsigned long maddr;	/* dual-port memory address */
-	unsigned msize;		/* dual-port memory size */
-	int irq;		/* interrupt request level */
-	int dma;		/* DMA request level */
-        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
-        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
-	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
-	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
-	unsigned bps;		/* data transfer rate */
-	unsigned mtu;		/* maximum transmit unit size */
-        unsigned udp_port;      /* UDP port for management */
-	unsigned char ttl;	/* Time To Live for UDP security */
-	unsigned char ft1;	/* FT1 Configurator Option */
-        char interface;		/* RS-232/V.35, etc. */
-	char clocking;		/* external/internal */
-	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
-	char station;		/* DTE/DCE, primary/secondary, etc. */
-	char connection;	/* permanent/switched/on-demand */
-	char read_mode;		/* read mode: Polling or interrupt */
-	char receive_only;	/* disable tx buffers */
-	char tty;		/* Create a fake tty device */
-	unsigned tty_major;	/* Major number for wanpipe tty device */
-	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
-	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
-	char backup;		/* Backup Mode */
-	unsigned hw_opt[4];	/* other hardware options */
-	unsigned reserved[4];
-				/****** arbitrary data ***************/
-	unsigned data_size;	/* data buffer size */
-	void* data;		/* data buffer, e.g. firmware */
-	union			/****** protocol-specific ************/
-	{
-		wan_x25_conf_t x25;	/* X.25 configuration */
-		wan_ppp_conf_t ppp;	/* PPP configuration */
-		wan_fr_conf_t fr;	/* frame relay configuration */
-		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
-	} u;
-} wandev_conf_t;
-
-/* 'config_id' definitions */
-#define	WANCONFIG_X25	101	/* X.25 link */
-#define	WANCONFIG_FR	102	/* frame relay link */
-#define	WANCONFIG_PPP	103	/* synchronous PPP link */
-#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
-#define WANCONFIG_BSC	105	/* BiSync Streaming */
-#define WANCONFIG_HDLC	106	/* HDLC Support */
-#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
-
 /*
- * Configuration options defines.
+ * wanrouter.h	Legacy declarations kept around until X25 is removed
  */
-/* general options */
-#define	WANOPT_OFF	0
-#define	WANOPT_ON	1
-#define	WANOPT_NO	0
-#define	WANOPT_YES	1
-
-/* intercace options */
-#define	WANOPT_RS232	0
-#define	WANOPT_V35	1
-
-/* data encoding options */
-#define	WANOPT_NRZ	0
-#define	WANOPT_NRZI	1
-#define	WANOPT_FM0	2
-#define	WANOPT_FM1	3
-
-/* link type options */
-#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
-#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
-
-/* clocking options */
-#define	WANOPT_EXTERNAL	0
-#define	WANOPT_INTERNAL	1
-
-/* station options */
-#define	WANOPT_DTE		0
-#define	WANOPT_DCE		1
-#define	WANOPT_CPE		0
-#define	WANOPT_NODE		1
-#define	WANOPT_SECONDARY	0
-#define	WANOPT_PRIMARY		1
-
-/* connection options */
-#define	WANOPT_PERMANENT	0	/* DTR always active */
-#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
-#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
-
-/* frame relay in-channel signalling */
-#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
-#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
-#define	WANOPT_FR_LMI		3	/* LMI */
-
-/* PPP IP Mode Options */
-#define	WANOPT_PPP_STATIC	0
-#define	WANOPT_PPP_HOST		1
-#define	WANOPT_PPP_PEER		2
-
-/* ASY Mode Options */
-#define WANOPT_ONE 		1
-#define WANOPT_TWO		2
-#define WANOPT_ONE_AND_HALF	3
-
-#define WANOPT_NONE	0
-#define WANOPT_ODD      1
-#define WANOPT_EVEN	2
-
-/* CHDLC Protocol Options */
-/* DF Commented out for now.
-
-#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
-*/
-
-/* Port options */
-#define WANOPT_PRI 0
-#define WANOPT_SEC 1
-/* read mode */
-#define	WANOPT_INTR	0
-#define WANOPT_POLL	1
 
-
-#define WANOPT_TTY_SYNC  0
-#define WANOPT_TTY_ASYNC 1
-/*----------------------------------------------------------------------------
- * WAN Link Status Info (for ROUTER_STAT IOCTL).
- */
-typedef struct wandev_stat
-{
-	unsigned state;		/* link state */
-	unsigned ndev;		/* number of configured interfaces */
-
-	/* link/interface configuration */
-	unsigned connection;	/* permanent/switched/on-demand */
-	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
-	unsigned mtu;		/* max. transmit unit for this device */
-
-	/* physical level statistics */
-	unsigned modem_status;	/* modem status */
-	unsigned rx_frames;	/* received frames count */
-	unsigned rx_overruns;	/* receiver overrun error count */
-	unsigned rx_crc_err;	/* receive CRC error count */
-	unsigned rx_aborts;	/* received aborted frames count */
-	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
-	unsigned rx_dropped;	/* frames discarded at device level */
-	unsigned tx_frames;	/* transmitted frames count */
-	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
-	unsigned tx_timeouts;	/* transmission timeouts */
-	unsigned tx_rejects;	/* other transmit errors */
-
-	/* media level statistics */
-	unsigned rx_bad_format;	/* frames with invalid format */
-	unsigned rx_bad_addr;	/* frames with invalid media address */
-	unsigned tx_retries;	/* frames re-transmitted */
-	unsigned reserved[16];	/* reserved for future use */
-} wandev_stat_t;
+#ifndef _UAPI_ROUTER_H
+#define _UAPI_ROUTER_H
 
 /* 'state' defines */
 enum wan_states
@@ -365,88 +11,7 @@ enum wan_states
 	WAN_UNCONFIGURED,	/* link/channel is not configured */
 	WAN_DISCONNECTED,	/* link/channel is disconnected */
 	WAN_CONNECTING,		/* connection is in progress */
-	WAN_CONNECTED,		/* link/channel is operational */
-	WAN_LIMIT,		/* for verification only */
-	WAN_DUALPORT,		/* for Dual Port cards */
-	WAN_DISCONNECTING,
-	WAN_FT1_READY		/* FT1 Configurator Ready */
+	WAN_CONNECTED		/* link/channel is operational */
 };
 
-enum {
-	WAN_LOCAL_IP,
-	WAN_POINTOPOINT_IP,
-	WAN_NETMASK_IP,
-	WAN_BROADCAST_IP
-};
-
-/* 'modem_status' masks */
-#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
-#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
-#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
-#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
-
-/*----------------------------------------------------------------------------
- * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
- */
-typedef struct wanif_conf
-{
-	unsigned magic;			/* magic number */
-	unsigned config_id;		/* configuration identifier */
-	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
-	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
-	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
-	unsigned idle_timeout;		/* sec, before disconnecting */
-	unsigned hold_timeout;		/* sec, before re-connecting */
-	unsigned cir;			/* Committed Information Rate fwd,bwd*/
-	unsigned bc;			/* Committed Burst Size fwd, bwd */
-	unsigned be;			/* Excess Burst Size fwd, bwd */ 
-	unsigned char enable_IPX;	/* Enable or Disable IPX */
-	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
-	unsigned inarp_interval;	/* sec, between InARP requests */
-	unsigned long network_number;	/* Network Number for IPX */
-	char mc;			/* Multicast on or off */
-	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
-	unsigned char port;		/* board port */
-	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
-	char pap;			/* PAP enabled or disabled */
-	char chap;			/* CHAP enabled or disabled */
-	unsigned char userid[511];	/* List of User Id */
-	unsigned char passwd[511];	/* List of passwords */
-	unsigned char sysname[31];	/* Name of the system */
-	unsigned char ignore_dcd;	/* Protocol options: */
-	unsigned char ignore_cts;	/*  Ignore these to determine */
-	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
-	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-	unsigned char ttl;		/* Time To Live for UDP security */
-	char interface;			/* RS-232/V.35, etc. */
-	char clocking;			/* external/internal */
-	unsigned bps;			/* data transfer rate */
-	unsigned mtu;			/* maximum transmit unit size */
-	unsigned char if_down;		/* brind down interface when disconnected */
-	unsigned char gateway;		/* Is this interface a gateway */
-	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
-
-	unsigned char asy_data_trans;     /* async API options */
-        unsigned char rts_hs_for_receive; /* async Protocol options */
-        unsigned char xon_xoff_hs_for_receive;
-	unsigned char xon_xoff_hs_for_transmit;
-	unsigned char dcd_hs_for_transmit;
-	unsigned char cts_hs_for_transmit;
-	unsigned char async_mode;
-	unsigned tx_bits_per_char;
-	unsigned rx_bits_per_char;
-	unsigned stop_bits;  
-	unsigned char parity;
- 	unsigned break_timer;
-        unsigned inter_char_timer;
-	unsigned rx_complete_length;
-	unsigned xon_char;
-	unsigned xoff_char;
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-} wanif_conf_t;
-
 #endif /* _UAPI_ROUTER_H */