Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
  omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  OMAP4: hwmod data: Fix alignment and end of line in structurefields
  OMAP4: hwmod data: Move the DMA structures
  OMAP4: hwmod data: Move the smartreflex structures
  OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
  arm: omap: tusb6010: add name for MUSB IRQ
  arm: omap: craneboard: Add USB EHCI support
  omap2+: Initialize serial port for dynamic remuxing for n8x0
  omap2+: Add struct omap_board_data and use it for platform level serial init
  omap2+: Allow hwmod state changes to mux pads based on the state changes
  omap2+: Add support for hwmod specific muxing of devices
  omap2+: Add omap_mux_get_by_name
  OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
  OMAP4: Smartreflex framework extensions
  OMAP4: hwmod: Add inital data for smartreflex modules.
  OMAP4: PM: Program correct init voltages for scalable VDDs
  OMAP4: Adding voltage driver support
  OMAP4: Register voltage PMIC parameters with the voltage layer
  OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  ...

Fix up trivial conflict in arch/arm/plat-omap/Kconfig

3 files changed, 25 insertions, 1 deletions

diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index 78ebf507ce56..7472449cbb74 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -1,9 +1,14 @@
 #ifndef __I2C_OMAP_H__
 #define __I2C_OMAP_H__
 
+#include <linux/platform_device.h>
+
 struct omap_i2c_bus_platform_data {
 	u32		clkrate;
 	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
+	int		(*device_enable) (struct platform_device *pdev);
+	int		(*device_shutdown) (struct platform_device *pdev);
+	int		(*device_idle) (struct platform_device *pdev);
 };
 
 #endif
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index 80352ad6581a..697474691749 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -9,7 +9,7 @@
 
 #define KEY(row, col, val)	((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
 				 (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
-				 (val & 0xffff))
+				 ((val) & 0xffff))
 
 #define KEY_ROW(k)		(((k) >> 24) & 0xff)
 #define KEY_COL(k)		(((k) >> 16) & 0xff)
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index c7a0ce11cd47..3ecb71a9e505 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -99,6 +99,13 @@
 #define UART_LCR_WLEN7		0x02 /* Wordlength: 7 bits */
 #define UART_LCR_WLEN8		0x03 /* Wordlength: 8 bits */
 
+/*
+ * Access to some registers depends on register access / configuration
+ * mode.
+ */
+#define UART_LCR_CONF_MODE_A	UART_LCR_DLAB	/* Configutation mode A */
+#define UART_LCR_CONF_MODE_B	0xBF		/* Configutation mode B */
+
 #define UART_MCR	4	/* Out: Modem Control Register */
 #define UART_MCR_CLKSEL		0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
 #define UART_MCR_TCRTLR		0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
@@ -341,5 +348,17 @@
 #define UART_OMAP_SYSS		0x16	/* System status register */
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
+/*
+ * These are the definitions for the MDR1 register
+ */
+#define UART_OMAP_MDR1_16X_MODE		0x00	/* UART 16x mode */
+#define UART_OMAP_MDR1_SIR_MODE		0x01	/* SIR mode */
+#define UART_OMAP_MDR1_16X_ABAUD_MODE	0x02	/* UART 16x auto-baud */
+#define UART_OMAP_MDR1_13X_MODE		0x03	/* UART 13x mode */
+#define UART_OMAP_MDR1_MIR_MODE		0x04	/* MIR mode */
+#define UART_OMAP_MDR1_FIR_MODE		0x05	/* FIR mode */
+#define UART_OMAP_MDR1_CIR_MODE		0x06	/* CIR mode */
+#define UART_OMAP_MDR1_DISABLE		0x07	/* Disable (default state) */
+
 #endif /* _LINUX_SERIAL_REG_H */