Merge tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Quite an active release for the SPI subsystem, lots of small updates
  and fixes scattered about with highlights including:

   - 3-wire support in the GPIO driver.

   - support for setting a custom memory name in the memory mapped flash
     drivers.

   - support for extended mode in the Freescale DSPI controller.

   - support for the non-standard integration with the Microsemi Ocelot
     platform in the DesignWare driver.

   - new driver for the SocioNext UniPhier"

* tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
  spi: davinci: fix a NULL pointer dereference
  spi: spi-mem: Constify spi_mem->name
  mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name
  spi: spi-mem: Extend the SPI mem interface to set a custom memory name
  spi: spi-mem: Fix a typo in the documentation of struct spi_mem
  spi: uniphier: remove unnecessary include headers
  spi: spi-gpio: add SPI_3WIRE support
  spi: add flags parameter to txrx_word function pointers
  spi: add SPI controller driver for UniPhier SoC
  spi: add DT bindings for UniPhier SPI controller
  spi: dw: document Microsemi integration
  spi: img-spfi: Set device select bits for SPFI port state
  spi: omap2-mcspi: remove several redundant variables
  spi: dw-mmio: add MSCC Ocelot support
  spi: dw: export dw_spi_set_cs
  spi: spi-fsl-espi: Log fifo counters on error
  spi: imx: Use the longuest possible burst size when in dynamic_burst
  spi: imx: remove unnecessary check in spi_imx_can_dma
  spi: imx: Use correct number of bytes per words
  spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32
  ...

3 files changed, 16 insertions, 257 deletions

diff --git a/include/linux/spi/adi_spi3.h b/include/linux/spi/adi_spi3.h
deleted file mode 100644
index c84123aa1d06..000000000000
--- a/include/linux/spi/adi_spi3.h
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Analog Devices SPI3 controller driver
- *
- * Copyright (c) 2014 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _ADI_SPI3_H_
-#define _ADI_SPI3_H_
-
-#include <linux/types.h>
-
-/* SPI_CONTROL */
-#define SPI_CTL_EN                  0x00000001    /* Enable */
-#define SPI_CTL_MSTR                0x00000002    /* Master/Slave */
-#define SPI_CTL_PSSE                0x00000004    /* controls modf error in master mode */
-#define SPI_CTL_ODM                 0x00000008    /* Open Drain Mode */
-#define SPI_CTL_CPHA                0x00000010    /* Clock Phase */
-#define SPI_CTL_CPOL                0x00000020    /* Clock Polarity */
-#define SPI_CTL_ASSEL               0x00000040    /* Slave Select Pin Control */
-#define SPI_CTL_SELST               0x00000080    /* Slave Select Polarity in-between transfers */
-#define SPI_CTL_EMISO               0x00000100    /* Enable MISO */
-#define SPI_CTL_SIZE                0x00000600    /* Word Transfer Size */
-#define SPI_CTL_SIZE08              0x00000000    /* SIZE: 8 bits */
-#define SPI_CTL_SIZE16              0x00000200    /* SIZE: 16 bits */
-#define SPI_CTL_SIZE32              0x00000400    /* SIZE: 32 bits */
-#define SPI_CTL_LSBF                0x00001000    /* LSB First */
-#define SPI_CTL_FCEN                0x00002000    /* Flow-Control Enable */
-#define SPI_CTL_FCCH                0x00004000    /* Flow-Control Channel Selection */
-#define SPI_CTL_FCPL                0x00008000    /* Flow-Control Polarity */
-#define SPI_CTL_FCWM                0x00030000    /* Flow-Control Water-Mark */
-#define SPI_CTL_FIFO0               0x00000000    /* FCWM: TFIFO empty or RFIFO Full */
-#define SPI_CTL_FIFO1               0x00010000    /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */
-#define SPI_CTL_FIFO2               0x00020000    /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */
-#define SPI_CTL_FMODE               0x00040000    /* Fast-mode Enable */
-#define SPI_CTL_MIOM                0x00300000    /* Multiple I/O Mode */
-#define SPI_CTL_MIO_DIS             0x00000000    /* MIOM: Disable */
-#define SPI_CTL_MIO_DUAL            0x00100000    /* MIOM: Enable DIOM (Dual I/O Mode) */
-#define SPI_CTL_MIO_QUAD            0x00200000    /* MIOM: Enable QUAD (Quad SPI Mode) */
-#define SPI_CTL_SOSI                0x00400000    /* Start on MOSI */
-/* SPI_RX_CONTROL */
-#define SPI_RXCTL_REN               0x00000001    /* Receive Channel Enable */
-#define SPI_RXCTL_RTI               0x00000004    /* Receive Transfer Initiate */
-#define SPI_RXCTL_RWCEN             0x00000008    /* Receive Word Counter Enable */
-#define SPI_RXCTL_RDR               0x00000070    /* Receive Data Request */
-#define SPI_RXCTL_RDR_DIS           0x00000000    /* RDR: Disabled */
-#define SPI_RXCTL_RDR_NE            0x00000010    /* RDR: RFIFO not empty */
-#define SPI_RXCTL_RDR_25            0x00000020    /* RDR: RFIFO 25% full */
-#define SPI_RXCTL_RDR_50            0x00000030    /* RDR: RFIFO 50% full */
-#define SPI_RXCTL_RDR_75            0x00000040    /* RDR: RFIFO 75% full */
-#define SPI_RXCTL_RDR_FULL          0x00000050    /* RDR: RFIFO full */
-#define SPI_RXCTL_RDO               0x00000100    /* Receive Data Over-Run */
-#define SPI_RXCTL_RRWM              0x00003000    /* FIFO Regular Water-Mark */
-#define SPI_RXCTL_RWM_0             0x00000000    /* RRWM: RFIFO Empty */
-#define SPI_RXCTL_RWM_25            0x00001000    /* RRWM: RFIFO 25% full */
-#define SPI_RXCTL_RWM_50            0x00002000    /* RRWM: RFIFO 50% full */
-#define SPI_RXCTL_RWM_75            0x00003000    /* RRWM: RFIFO 75% full */
-#define SPI_RXCTL_RUWM              0x00070000    /* FIFO Urgent Water-Mark */
-#define SPI_RXCTL_UWM_DIS           0x00000000    /* RUWM: Disabled */
-#define SPI_RXCTL_UWM_25            0x00010000    /* RUWM: RFIFO 25% full */
-#define SPI_RXCTL_UWM_50            0x00020000    /* RUWM: RFIFO 50% full */
-#define SPI_RXCTL_UWM_75            0x00030000    /* RUWM: RFIFO 75% full */
-#define SPI_RXCTL_UWM_FULL          0x00040000    /* RUWM: RFIFO full */
-/* SPI_TX_CONTROL */
-#define SPI_TXCTL_TEN               0x00000001    /* Transmit Channel Enable */
-#define SPI_TXCTL_TTI               0x00000004    /* Transmit Transfer Initiate */
-#define SPI_TXCTL_TWCEN             0x00000008    /* Transmit Word Counter Enable */
-#define SPI_TXCTL_TDR               0x00000070    /* Transmit Data Request */
-#define SPI_TXCTL_TDR_DIS           0x00000000    /* TDR: Disabled */
-#define SPI_TXCTL_TDR_NF            0x00000010    /* TDR: TFIFO not full */
-#define SPI_TXCTL_TDR_25            0x00000020    /* TDR: TFIFO 25% empty */
-#define SPI_TXCTL_TDR_50            0x00000030    /* TDR: TFIFO 50% empty */
-#define SPI_TXCTL_TDR_75            0x00000040    /* TDR: TFIFO 75% empty */
-#define SPI_TXCTL_TDR_EMPTY         0x00000050    /* TDR: TFIFO empty */
-#define SPI_TXCTL_TDU               0x00000100    /* Transmit Data Under-Run */
-#define SPI_TXCTL_TRWM              0x00003000    /* FIFO Regular Water-Mark */
-#define SPI_TXCTL_RWM_FULL          0x00000000    /* TRWM: TFIFO full */
-#define SPI_TXCTL_RWM_25            0x00001000    /* TRWM: TFIFO 25% empty */
-#define SPI_TXCTL_RWM_50            0x00002000    /* TRWM: TFIFO 50% empty */
-#define SPI_TXCTL_RWM_75            0x00003000    /* TRWM: TFIFO 75% empty */
-#define SPI_TXCTL_TUWM              0x00070000    /* FIFO Urgent Water-Mark */
-#define SPI_TXCTL_UWM_DIS           0x00000000    /* TUWM: Disabled */
-#define SPI_TXCTL_UWM_25            0x00010000    /* TUWM: TFIFO 25% empty */
-#define SPI_TXCTL_UWM_50            0x00020000    /* TUWM: TFIFO 50% empty */
-#define SPI_TXCTL_UWM_75            0x00030000    /* TUWM: TFIFO 75% empty */
-#define SPI_TXCTL_UWM_EMPTY         0x00040000    /* TUWM: TFIFO empty */
-/* SPI_CLOCK */
-#define SPI_CLK_BAUD                0x0000FFFF    /* Baud Rate */
-/* SPI_DELAY */
-#define SPI_DLY_STOP                0x000000FF    /* Transfer delay time in multiples of SCK period */
-#define SPI_DLY_LEADX               0x00000100    /* Extended (1 SCK) LEAD Control */
-#define SPI_DLY_LAGX                0x00000200    /* Extended (1 SCK) LAG control */
-/* SPI_SSEL */
-#define SPI_SLVSEL_SSE1             0x00000002    /* SPISSEL1 Enable */
-#define SPI_SLVSEL_SSE2             0x00000004    /* SPISSEL2 Enable */
-#define SPI_SLVSEL_SSE3             0x00000008    /* SPISSEL3 Enable */
-#define SPI_SLVSEL_SSE4             0x00000010    /* SPISSEL4 Enable */
-#define SPI_SLVSEL_SSE5             0x00000020    /* SPISSEL5 Enable */
-#define SPI_SLVSEL_SSE6             0x00000040    /* SPISSEL6 Enable */
-#define SPI_SLVSEL_SSE7             0x00000080    /* SPISSEL7 Enable */
-#define SPI_SLVSEL_SSEL1            0x00000200    /* SPISSEL1 Value */
-#define SPI_SLVSEL_SSEL2            0x00000400    /* SPISSEL2 Value */
-#define SPI_SLVSEL_SSEL3            0x00000800    /* SPISSEL3 Value */
-#define SPI_SLVSEL_SSEL4            0x00001000    /* SPISSEL4 Value */
-#define SPI_SLVSEL_SSEL5            0x00002000    /* SPISSEL5 Value */
-#define SPI_SLVSEL_SSEL6            0x00004000    /* SPISSEL6 Value */
-#define SPI_SLVSEL_SSEL7            0x00008000    /* SPISSEL7 Value */
-/* SPI_RWC */
-#define SPI_RWC_VALUE               0x0000FFFF    /* Received Word-Count */
-/* SPI_RWCR */
-#define SPI_RWCR_VALUE              0x0000FFFF    /* Received Word-Count Reload */
-/* SPI_TWC */
-#define SPI_TWC_VALUE               0x0000FFFF    /* Transmitted Word-Count */
-/* SPI_TWCR */
-#define SPI_TWCR_VALUE              0x0000FFFF    /* Transmitted Word-Count Reload */
-/* SPI_IMASK */
-#define SPI_IMSK_RUWM               0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_TUWM               0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_ROM                0x00000010    /* Receive Over-Run Error Interrupt Mask */
-#define SPI_IMSK_TUM                0x00000020    /* Transmit Under-Run Error Interrupt Mask */
-#define SPI_IMSK_TCM                0x00000040    /* Transmit Collision Error Interrupt Mask */
-#define SPI_IMSK_MFM                0x00000080    /* Mode Fault Error Interrupt Mask */
-#define SPI_IMSK_RSM                0x00000100    /* Receive Start Interrupt Mask */
-#define SPI_IMSK_TSM                0x00000200    /* Transmit Start Interrupt Mask */
-#define SPI_IMSK_RFM                0x00000400    /* Receive Finish Interrupt Mask */
-#define SPI_IMSK_TFM                0x00000800    /* Transmit Finish Interrupt Mask */
-/* SPI_IMASKCL */
-#define SPI_IMSK_CLR_RUW            0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_CLR_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_CLR_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
-#define SPI_IMSK_CLR_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
-#define SPI_IMSK_CLR_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
-#define SPI_IMSK_CLR_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
-#define SPI_IMSK_CLR_RSM            0x00000100    /* Receive Start Interrupt Mask */
-#define SPI_IMSK_CLR_TSM            0x00000200    /* Transmit Start Interrupt Mask */
-#define SPI_IMSK_CLR_RFM            0x00000400    /* Receive Finish Interrupt Mask */
-#define SPI_IMSK_CLR_TFM            0x00000800    /* Transmit Finish Interrupt Mask */
-/* SPI_IMASKST */
-#define SPI_IMSK_SET_RUWM           0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_SET_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_SET_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
-#define SPI_IMSK_SET_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
-#define SPI_IMSK_SET_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
-#define SPI_IMSK_SET_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
-#define SPI_IMSK_SET_RSM            0x00000100    /* Receive Start Interrupt Mask */
-#define SPI_IMSK_SET_TSM            0x00000200    /* Transmit Start Interrupt Mask */
-#define SPI_IMSK_SET_RFM            0x00000400    /* Receive Finish Interrupt Mask */
-#define SPI_IMSK_SET_TFM            0x00000800    /* Transmit Finish Interrupt Mask */
-/* SPI_STATUS */
-#define SPI_STAT_SPIF               0x00000001    /* SPI Finished */
-#define SPI_STAT_RUWM               0x00000002    /* Receive Urgent Water-Mark Breached */
-#define SPI_STAT_TUWM               0x00000004    /* Transmit Urgent Water-Mark Breached */
-#define SPI_STAT_ROE                0x00000010    /* Receive Over-Run Error Indication */
-#define SPI_STAT_TUE                0x00000020    /* Transmit Under-Run Error Indication */
-#define SPI_STAT_TCE                0x00000040    /* Transmit Collision Error Indication */
-#define SPI_STAT_MODF               0x00000080    /* Mode Fault Error Indication */
-#define SPI_STAT_RS                 0x00000100    /* Receive Start Indication */
-#define SPI_STAT_TS                 0x00000200    /* Transmit Start Indication */
-#define SPI_STAT_RF                 0x00000400    /* Receive Finish Indication */
-#define SPI_STAT_TF                 0x00000800    /* Transmit Finish Indication */
-#define SPI_STAT_RFS                0x00007000    /* SPI_RFIFO status */
-#define SPI_STAT_RFIFO_EMPTY        0x00000000    /* RFS: RFIFO Empty */
-#define SPI_STAT_RFIFO_25           0x00001000    /* RFS: RFIFO 25% Full */
-#define SPI_STAT_RFIFO_50           0x00002000    /* RFS: RFIFO 50% Full */
-#define SPI_STAT_RFIFO_75           0x00003000    /* RFS: RFIFO 75% Full */
-#define SPI_STAT_RFIFO_FULL         0x00004000    /* RFS: RFIFO Full */
-#define SPI_STAT_TFS                0x00070000    /* SPI_TFIFO status */
-#define SPI_STAT_TFIFO_FULL         0x00000000    /* TFS: TFIFO full */
-#define SPI_STAT_TFIFO_25           0x00010000    /* TFS: TFIFO 25% empty */
-#define SPI_STAT_TFIFO_50           0x00020000    /* TFS: TFIFO 50% empty */
-#define SPI_STAT_TFIFO_75           0x00030000    /* TFS: TFIFO 75% empty */
-#define SPI_STAT_TFIFO_EMPTY        0x00040000    /* TFS: TFIFO empty */
-#define SPI_STAT_FCS                0x00100000    /* Flow-Control Stall Indication */
-#define SPI_STAT_RFE                0x00400000    /* SPI_RFIFO Empty */
-#define SPI_STAT_TFF                0x00800000    /* SPI_TFIFO Full */
-/* SPI_ILAT */
-#define SPI_ILAT_RUWMI              0x00000002    /* Receive Urgent Water Mark Interrupt */
-#define SPI_ILAT_TUWMI              0x00000004    /* Transmit Urgent Water Mark Interrupt */
-#define SPI_ILAT_ROI                0x00000010    /* Receive Over-Run Error Indication */
-#define SPI_ILAT_TUI                0x00000020    /* Transmit Under-Run Error Indication */
-#define SPI_ILAT_TCI                0x00000040    /* Transmit Collision Error Indication */
-#define SPI_ILAT_MFI                0x00000080    /* Mode Fault Error Indication */
-#define SPI_ILAT_RSI                0x00000100    /* Receive Start Indication */
-#define SPI_ILAT_TSI                0x00000200    /* Transmit Start Indication */
-#define SPI_ILAT_RFI                0x00000400    /* Receive Finish Indication */
-#define SPI_ILAT_TFI                0x00000800    /* Transmit Finish Indication */
-/* SPI_ILATCL */
-#define SPI_ILAT_CLR_RUWMI          0x00000002    /* Receive Urgent Water Mark Interrupt */
-#define SPI_ILAT_CLR_TUWMI          0x00000004    /* Transmit Urgent Water Mark Interrupt */
-#define SPI_ILAT_CLR_ROI            0x00000010    /* Receive Over-Run Error Indication */
-#define SPI_ILAT_CLR_TUI            0x00000020    /* Transmit Under-Run Error Indication */
-#define SPI_ILAT_CLR_TCI            0x00000040    /* Transmit Collision Error Indication */
-#define SPI_ILAT_CLR_MFI            0x00000080    /* Mode Fault Error Indication */
-#define SPI_ILAT_CLR_RSI            0x00000100    /* Receive Start Indication */
-#define SPI_ILAT_CLR_TSI            0x00000200    /* Transmit Start Indication */
-#define SPI_ILAT_CLR_RFI            0x00000400    /* Receive Finish Indication */
-#define SPI_ILAT_CLR_TFI            0x00000800    /* Transmit Finish Indication */
-
-/*
- * adi spi3 registers layout
- */
-struct adi_spi_regs {
-	u32 revid;
-	u32 control;
-	u32 rx_control;
-	u32 tx_control;
-	u32 clock;
-	u32 delay;
-	u32 ssel;
-	u32 rwc;
-	u32 rwcr;
-	u32 twc;
-	u32 twcr;
-	u32 reserved0;
-	u32 emask;
-	u32 emaskcl;
-	u32 emaskst;
-	u32 reserved1;
-	u32 status;
-	u32 elat;
-	u32 elatcl;
-	u32 reserved2;
-	u32 rfifo;
-	u32 reserved3;
-	u32 tfifo;
-};
-
-#define MAX_CTRL_CS          8  /* cs in spi controller */
-
-/* device.platform_data for SSP controller devices */
-struct adi_spi3_master {
-	u16 num_chipselect;
-	u16 pin_req[7];
-};
-
-/* spi_board_info.controller_data for SPI slave devices,
- * copied to spi_device.platform_data ... mostly for dma tuning
- */
-struct adi_spi3_chip {
-	u32 control;
-	u16 cs_chg_udelay; /* Some devices require 16-bit delays */
-	u32 tx_dummy_val; /* tx value for rx only transfer */
-	bool enable_dma;
-};
-
-#endif /* _ADI_SPI3_H_ */
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 4fa34a227a0f..b2bd4b4127c4 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -124,7 +124,8 @@ struct spi_mem_op {
 /**
  * struct spi_mem - describes a SPI memory device
  * @spi: the underlying SPI device
- * @drvpriv: spi_mem_drviver private data
+ * @drvpriv: spi_mem_driver private data
+ * @name: name of the SPI memory device
  *
  * Extra information that describe the SPI memory device and may be needed by
  * the controller to properly handle this device should be placed here.
@@ -135,6 +136,7 @@ struct spi_mem_op {
 struct spi_mem {
 	struct spi_device *spi;
 	void *drvpriv;
+	const char *name;
 };
 
 /**
@@ -167,6 +169,13 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
  *		    limitations)
  * @supports_op: check if an operation is supported by the controller
  * @exec_op: execute a SPI memory operation
+ * @get_name: get a custom name for the SPI mem device from the controller.
+ *	      This might be needed if the controller driver has been ported
+ *	      to use the SPI mem layer and a custom name is used to keep
+ *	      mtdparts compatible.
+ *	      Note that if the implementation of this function allocates memory
+ *	      dynamically, then it should do so with devm_xxx(), as we don't
+ *	      have a ->free_name() function.
  *
  * This interface should be implemented by SPI controllers providing an
  * high-level interface to execute SPI memory operation, which is usually the
@@ -178,6 +187,7 @@ struct spi_controller_mem_ops {
 			    const struct spi_mem_op *op);
 	int (*exec_op)(struct spi_mem *mem,
 		       const struct spi_mem_op *op);
+	const char *(*get_name)(struct spi_mem *mem);
 };
 
 /**
@@ -236,6 +246,8 @@ bool spi_mem_supports_op(struct spi_mem *mem,
 int spi_mem_exec_op(struct spi_mem *mem,
 		    const struct spi_mem_op *op);
 
+const char *spi_mem_get_name(struct spi_mem *mem);
+
 int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv,
 				       struct module *owner);
 
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index 51d8c060e513..b7e021b274dc 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -8,7 +8,7 @@ struct spi_bitbang {
 	struct mutex		lock;
 	u8			busy;
 	u8			use_dma;
-	u8			flags;		/* extra spi->mode support */
+	u16			flags;		/* extra spi->mode support */
 
 	struct spi_master	*master;
 
@@ -30,7 +30,8 @@ struct spi_bitbang {
 	/* txrx_word[SPI_MODE_*]() just looks like a shift register */
 	u32	(*txrx_word[4])(struct spi_device *spi,
 			unsigned nsecs,
-			u32 word, u8 bits);
+			u32 word, u8 bits, unsigned flags);
+	int	(*set_line_direction)(struct spi_device *spi, bool output);
 };
 
 /* you can call these default bitbang->master methods from your custom