Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

6 files changed, 162 insertions, 17 deletions

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index be150cf8cd43..4261a67682c0 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -367,6 +367,7 @@ enum {
 #define HCI_ERROR_REMOTE_POWER_OFF	0x15
 #define HCI_ERROR_LOCAL_HOST_TERM	0x16
 #define HCI_ERROR_PAIRING_NOT_ALLOWED	0x18
+#define HCI_ERROR_ADVERTISING_TIMEOUT	0x3c
 
 /* Flow control modes */
 #define HCI_FLOW_CTL_MODE_PACKET_BASED	0x00
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 5f8bc05694ac..d73f41855ada 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -68,6 +68,11 @@ struct discovery_state {
 	struct list_head	unknown;	/* Name state not known */
 	struct list_head	resolve;	/* Name needs to be resolved */
 	__u32			timestamp;
+	bdaddr_t		last_adv_addr;
+	u8			last_adv_addr_type;
+	s8			last_adv_rssi;
+	u8			last_adv_data[HCI_MAX_AD_LENGTH];
+	u8			last_adv_data_len;
 };
 
 struct hci_conn_hash {
@@ -194,6 +199,7 @@ struct hci_dev {
 	__u16		le_scan_window;
 	__u16		le_conn_min_interval;
 	__u16		le_conn_max_interval;
+	__u16		discov_interleaved_timeout;
 	__u8		ssp_debug_mode;
 
 	__u16		devid_source;
@@ -1204,8 +1210,8 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event);
  */
 #define DISCOV_LE_SCAN_WIN		0x12
 #define DISCOV_LE_SCAN_INT		0x12
-#define DISCOV_LE_TIMEOUT		msecs_to_jiffies(10240)
-#define DISCOV_INTERLEAVED_TIMEOUT	msecs_to_jiffies(5120)
+#define DISCOV_LE_TIMEOUT		10240	/* msec */
+#define DISCOV_INTERLEAVED_TIMEOUT	5120	/* msec */
 #define DISCOV_INTERLEAVED_INQUIRY_LEN	0x04
 #define DISCOV_BREDR_INQUIRY_LEN	0x08
 
@@ -1265,7 +1271,8 @@ void mgmt_read_local_oob_data_complete(struct hci_dev *hdev, u8 *hash192,
 				       u8 *randomizer256, u8 status);
 void mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
 		       u8 addr_type, u8 *dev_class, s8 rssi, u8 cfm_name,
-		       u8 ssp, u8 *eir, u16 eir_len);
+		       u8 ssp, u8 *eir, u16 eir_len, u8 *scan_rsp,
+		       u8 scan_rsp_len);
 void mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
 		      u8 addr_type, s8 rssi, u8 *name, u8 name_len);
 void mgmt_discovering(struct hci_dev *hdev, u8 discovering);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f3539a15c411..7eae46ccec01 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -109,6 +109,13 @@ enum ieee80211_band {
  *	channel as the control or any of the secondary channels.
  *	This may be due to the driver or due to regulatory bandwidth
  *	restrictions.
+ * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY
+ * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted
+ *	on this channel.
+ *
  */
 enum ieee80211_channel_flags {
 	IEEE80211_CHAN_DISABLED		= 1<<0,
@@ -120,6 +127,10 @@ enum ieee80211_channel_flags {
 	IEEE80211_CHAN_NO_OFDM		= 1<<6,
 	IEEE80211_CHAN_NO_80MHZ		= 1<<7,
 	IEEE80211_CHAN_NO_160MHZ	= 1<<8,
+	IEEE80211_CHAN_INDOOR_ONLY	= 1<<9,
+	IEEE80211_CHAN_GO_CONCURRENT	= 1<<10,
+	IEEE80211_CHAN_NO_20MHZ		= 1<<11,
+	IEEE80211_CHAN_NO_10MHZ		= 1<<12,
 };
 
 #define IEEE80211_CHAN_NO_HT40 \
@@ -441,10 +452,13 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
  * cfg80211_chandef_dfs_required - checks if radar detection is required
  * @wiphy: the wiphy to validate against
  * @chandef: the channel definition to check
- * Return: 1 if radar detection is required, 0 if it is not, < 0 on error
+ * @iftype: the interface type as specified in &enum nl80211_iftype
+ * Returns:
+ *	1 if radar detection is required, 0 if it is not, < 0 on error
  */
 int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
-				  const struct cfg80211_chan_def *chandef);
+				  const struct cfg80211_chan_def *chandef,
+				  enum nl80211_iftype);
 
 /**
  * ieee80211_chandef_rate_flags - returns rate flags for a channel
@@ -654,7 +668,6 @@ struct cfg80211_acl_data {
  * @p2p_opp_ps: P2P opportunistic PS
  * @acl: ACL configuration used by the drivers which has support for
  *	MAC address based access control
- * @radar_required: set if radar detection is required
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -672,7 +685,6 @@ struct cfg80211_ap_settings {
 	u8 p2p_ctwindow;
 	bool p2p_opp_ps;
 	const struct cfg80211_acl_data *acl;
-	bool radar_required;
 };
 
 /**
@@ -2278,6 +2290,10 @@ struct cfg80211_qos_map {
  * @channel_switch: initiate channel-switch procedure (with CSA)
  *
  * @set_qos_map: Set QoS mapping information to the driver
+ *
+ * @set_ap_chanwidth: Set the AP (including P2P GO) mode channel width for the
+ *	given interface This is used e.g. for dynamic HT 20/40 MHz channel width
+ *	changes during the lifetime of the BSS.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2521,9 +2537,13 @@ struct cfg80211_ops {
 	int	(*channel_switch)(struct wiphy *wiphy,
 				  struct net_device *dev,
 				  struct cfg80211_csa_settings *params);
+
 	int     (*set_qos_map)(struct wiphy *wiphy,
 			       struct net_device *dev,
 			       struct cfg80211_qos_map *qos_map);
+
+	int	(*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev,
+				    struct cfg80211_chan_def *chandef);
 };
 
 /*
@@ -3194,6 +3214,7 @@ struct cfg80211_cached_keys;
  * @ibss_dfs_possible: (private) IBSS may change to a DFS channel
  * @event_list: (private) list for internal event processing
  * @event_lock: (private) lock for event list
+ * @owner_nlportid: (private) owner socket port ID
  */
 struct wireless_dev {
 	struct wiphy *wiphy;
@@ -3241,6 +3262,8 @@ struct wireless_dev {
 	unsigned long cac_start_time;
 	unsigned int cac_time_ms;
 
+	u32 owner_nlportid;
+
 #ifdef CONFIG_CFG80211_WEXT
 	/* wext data */
 	struct {
@@ -3600,7 +3623,7 @@ int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
  * default channel settings will be disregarded. If no rule is found for a
  * channel on the regulatory domain the channel will be disabled.
  * Drivers using this for a wiphy should also set the wiphy flag
- * WIPHY_FLAG_CUSTOM_REGULATORY or cfg80211 will set it for the wiphy
+ * REGULATORY_CUSTOM_REG or cfg80211 will set it for the wiphy
  * that called this helper.
  */
 void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
@@ -4531,12 +4554,14 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy,
  * cfg80211_reg_can_beacon - check if beaconing is allowed
  * @wiphy: the wiphy
  * @chandef: the channel definition
+ * @iftype: interface type
  *
  * Return: %true if there is no secondary channel or the secondary channel(s)
  * can be used for beaconing (i.e. is not a radar channel etc.)
  */
 bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
-			     struct cfg80211_chan_def *chandef);
+			     struct cfg80211_chan_def *chandef,
+			     enum nl80211_iftype iftype);
 
 /*
  * cfg80211_ch_switch_notify - update wdev channel and notify userspace
@@ -4682,6 +4707,55 @@ void cfg80211_crit_proto_stopped(struct wireless_dev *wdev, gfp_t gfp);
  */
 unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy);
 
+/**
+ * cfg80211_check_combinations - check interface combinations
+ *
+ * @wiphy: the wiphy
+ * @num_different_channels: the number of different channels we want
+ *	to use for verification
+ * @radar_detect: a bitmap where each bit corresponds to a channel
+ *	width where radar detection is needed, as in the definition of
+ *	&struct ieee80211_iface_combination.@radar_detect_widths
+ * @iftype_num: array with the numbers of interfaces of each interface
+ *	type.  The index is the interface type as specified in &enum
+ *	nl80211_iftype.
+ *
+ * This function can be called by the driver to check whether a
+ * combination of interfaces and their types are allowed according to
+ * the interface combinations.
+ */
+int cfg80211_check_combinations(struct wiphy *wiphy,
+				const int num_different_channels,
+				const u8 radar_detect,
+				const int iftype_num[NUM_NL80211_IFTYPES]);
+
+/**
+ * cfg80211_iter_combinations - iterate over matching combinations
+ *
+ * @wiphy: the wiphy
+ * @num_different_channels: the number of different channels we want
+ *	to use for verification
+ * @radar_detect: a bitmap where each bit corresponds to a channel
+ *	width where radar detection is needed, as in the definition of
+ *	&struct ieee80211_iface_combination.@radar_detect_widths
+ * @iftype_num: array with the numbers of interfaces of each interface
+ *	type.  The index is the interface type as specified in &enum
+ *	nl80211_iftype.
+ * @iter: function to call for each matching combination
+ * @data: pointer to pass to iter function
+ *
+ * This function can be called by the driver to check what possible
+ * combinations it fits in at a given moment, e.g. for channel switching
+ * purposes.
+ */
+int cfg80211_iter_combinations(struct wiphy *wiphy,
+			       const int num_different_channels,
+			       const u8 radar_detect,
+			       const int iftype_num[NUM_NL80211_IFTYPES],
+			       void (*iter)(const struct ieee80211_iface_combination *c,
+					    void *data),
+			       void *data);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 8248e3909fdf..451c1bf00df9 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1202,14 +1202,18 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
  *	fall back to software crypto. Note that this flag deals only with
  *	RX, if your crypto engine can't deal with TX you can also set the
  *	%IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
+ * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
+ *	driver for a CCMP key to indicate that is requires IV generation
+ *	only for managment frames (MFP).
  */
 enum ieee80211_key_flags {
-	IEEE80211_KEY_FLAG_GENERATE_IV	= 1<<1,
-	IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
-	IEEE80211_KEY_FLAG_PAIRWISE	= 1<<3,
-	IEEE80211_KEY_FLAG_SW_MGMT_TX	= 1<<4,
-	IEEE80211_KEY_FLAG_PUT_IV_SPACE = 1<<5,
-	IEEE80211_KEY_FLAG_RX_MGMT	= 1<<6,
+	IEEE80211_KEY_FLAG_GENERATE_IV_MGMT	= BIT(0),
+	IEEE80211_KEY_FLAG_GENERATE_IV		= BIT(1),
+	IEEE80211_KEY_FLAG_GENERATE_MMIC	= BIT(2),
+	IEEE80211_KEY_FLAG_PAIRWISE		= BIT(3),
+	IEEE80211_KEY_FLAG_SW_MGMT_TX		= BIT(4),
+	IEEE80211_KEY_FLAG_PUT_IV_SPACE		= BIT(5),
+	IEEE80211_KEY_FLAG_RX_MGMT		= BIT(6),
 };
 
 /**
@@ -1555,6 +1559,12 @@ struct ieee80211_tx_control {
  *	for a single active channel while using channel contexts. When support
  *	is not enabled the default action is to disconnect when getting the
  *	CSA frame.
+ *
+ * @IEEE80211_HW_CHANGE_RUNNING_CHANCTX: The hardware can change a
+ *	channel context on-the-fly.  This is needed for channel switch
+ *	on single-channel hardware.  It can also be used as an
+ *	optimization in certain channel switch cases with
+ *	multi-channel.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -1586,6 +1596,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_TIMING_BEACON_ONLY			= 1<<26,
 	IEEE80211_HW_SUPPORTS_HT_CCK_RATES		= 1<<27,
 	IEEE80211_HW_CHANCTX_STA_CSA			= 1<<28,
+	IEEE80211_HW_CHANGE_RUNNING_CHANCTX		= 1<<29,
 };
 
 /**
@@ -2609,6 +2620,7 @@ enum ieee80211_roc_type {
  *	of queues to flush, which is useful if different virtual interfaces
  *	use different hardware queues; it may also indicate all queues.
  *	If the parameter @drop is set to %true, pending frames may be dropped.
+ *	Note that vif can be NULL.
  *	The callback can sleep.
  *
  * @channel_switch: Drivers that need (or want) to offload the channel
@@ -2871,7 +2883,8 @@ struct ieee80211_ops {
 			     struct netlink_callback *cb,
 			     void *data, int len);
 #endif
-	void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop);
+	void (*flush)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		      u32 queues, bool drop);
 	void (*channel_switch)(struct ieee80211_hw *hw,
 			       struct ieee80211_channel_switch *ch_switch);
 	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
@@ -4576,7 +4589,9 @@ conf_is_ht40(struct ieee80211_conf *conf)
 static inline bool
 conf_is_ht(struct ieee80211_conf *conf)
 {
-	return conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT;
+	return (conf->chandef.width != NL80211_CHAN_WIDTH_5) &&
+		(conf->chandef.width != NL80211_CHAN_WIDTH_10) &&
+		(conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT);
 }
 
 static inline enum nl80211_iftype
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index 75fc1f5a948d..259992444e80 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -131,6 +131,11 @@ struct regulatory_request {
  * 	all country IE information processed by the regulatory core. This will
  * 	override %REGULATORY_COUNTRY_IE_FOLLOW_POWER as all country IEs will
  * 	be ignored.
+ * @REGULATORY_ENABLE_RELAX_NO_IR: for devices that wish to allow the
+ *      NO_IR relaxation, which enables transmissions on channels on which
+ *      otherwise initiating radiation is not allowed. This will enable the
+ *      relaxations enabled under the CFG80211_REG_RELAX_NO_IR configuration
+ *      option
  */
 enum ieee80211_regulatory_flags {
 	REGULATORY_CUSTOM_REG			= BIT(0),
@@ -138,6 +143,7 @@ enum ieee80211_regulatory_flags {
 	REGULATORY_DISABLE_BEACON_HINTS		= BIT(2),
 	REGULATORY_COUNTRY_IE_FOLLOW_POWER	= BIT(3),
 	REGULATORY_COUNTRY_IE_IGNORE		= BIT(4),
+	REGULATORY_ENABLE_RELAX_NO_IR           = BIT(5),
 };
 
 struct ieee80211_freq_range {
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 1ba9d626aa83..406010d4def0 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1579,6 +1579,10 @@ enum nl80211_commands {
  * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
  *	As specified in the &enum nl80211_tdls_peer_capability.
  *
+ * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
+ *	creation then the new interface will be owned by the netlink socket
+ *	that created it and will be destroyed when the socket is closed
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1914,6 +1918,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_TDLS_PEER_CAPABILITY,
 
+	NL80211_ATTR_IFACE_SOCKET_OWNER,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2336,9 +2342,34 @@ enum nl80211_band_attr {
  *	using this channel as the primary or any of the secondary channels
  *	isn't possible
  * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
+ *	channel. A channel that has the INDOOR_ONLY attribute can only be
+ *	used when there is a clear assessment that the device is operating in
+ *	an indoor surroundings, i.e., it is connected to AC power (and not
+ *	through portable DC inverters) or is under the control of a master
+ *	that is acting as an AP and is connected to AC power.
+ * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
+ *	channel if it's connected concurrently to a BSS on the same channel on
+ *	the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
+ *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
+ *	channel that has the GO_CONCURRENT attribute set can be done when there
+ *	is a clear assessment that the device is operating under the guidance of
+ *	an authorized master, i.e., setting up a GO while the device is also
+ *	connected to an AP with DFS and radar detection on the UNII band (it is
+ *	up to user-space, i.e., wpa_supplicant to perform the required
+ *	verifications)
+ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
+ *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+ *
+ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
+ * for more information on the FCC description of the relaxations allowed
+ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
+ * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
  */
 enum nl80211_frequency_attr {
 	__NL80211_FREQUENCY_ATTR_INVALID,
@@ -2355,6 +2386,10 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_80MHZ,
 	NL80211_FREQUENCY_ATTR_NO_160MHZ,
 	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
+	NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
+	NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_NO_20MHZ,
+	NL80211_FREQUENCY_ATTR_NO_10MHZ,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2573,10 +2608,13 @@ enum nl80211_dfs_regions {
  *	present has been registered with the wireless core that
  *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
  *	supported feature.
+ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
+ *	platform is operating in an indoor environment.
  */
 enum nl80211_user_reg_hint_type {
 	NL80211_USER_REG_HINT_USER	= 0,
 	NL80211_USER_REG_HINT_CELL_BASE = 1,
+	NL80211_USER_REG_HINT_INDOOR    = 2,
 };
 
 /**
@@ -3891,6 +3929,9 @@ enum nl80211_ap_sme_features {
  *	interface. An active monitor interface behaves like a normal monitor
  *	interface, but gets added to the driver. It ensures that incoming
  *	unicast packets directed at the configured interface address get ACKed.
+ * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
+ *	channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
+ *	lifetime of a BSS.
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
@@ -3911,6 +3952,7 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15,
 	NL80211_FEATURE_USERSPACE_MPM			= 1 << 16,
 	NL80211_FEATURE_ACTIVE_MONITOR			= 1 << 17,
+	NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE	= 1 << 18,
 };
 
 /**