Merge tag 'mac80211-next-for-john-2014-11-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg <johannes@sipsolutions.net> says:

"This relatively large batch of changes is comprised of the
following:
 * large mac80211-hwsim changes from Ben, Jukka and a bit myself
 * OCB/WAVE/11p support from Rostislav on behalf of the Czech Technical
   University in Prague and Volkswagen Group Research
 * minstrel VHT work from Karl
 * more CSA work from Luca
 * WMM admission control support in mac80211 (myself)
 * various smaller fixes, spelling corrections, and minor API additions"

Conflicts:
	drivers/net/wireless/ath/wil6210/cfg80211.c

Signed-off-by: John W. Linville <linville@tuxdriver.com>

4 files changed, 253 insertions, 23 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index b1be39c76931..f65b5446d983 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1274,7 +1274,7 @@ struct ieee80211_ht_cap {
 #define		IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT	2
 
 /*
- * Maximum length of AMPDU that the STA can receive.
+ * Maximum length of AMPDU that the STA can receive in high-throughput (HT).
  * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
  */
 enum ieee80211_max_ampdu_length_exp {
@@ -1284,6 +1284,21 @@ enum ieee80211_max_ampdu_length_exp {
 	IEEE80211_HT_MAX_AMPDU_64K = 3
 };
 
+/*
+ * Maximum length of AMPDU that the STA can receive in VHT.
+ * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
+ */
+enum ieee80211_vht_max_ampdu_length_exp {
+	IEEE80211_VHT_MAX_AMPDU_8K = 0,
+	IEEE80211_VHT_MAX_AMPDU_16K = 1,
+	IEEE80211_VHT_MAX_AMPDU_32K = 2,
+	IEEE80211_VHT_MAX_AMPDU_64K = 3,
+	IEEE80211_VHT_MAX_AMPDU_128K = 4,
+	IEEE80211_VHT_MAX_AMPDU_256K = 5,
+	IEEE80211_VHT_MAX_AMPDU_512K = 6,
+	IEEE80211_VHT_MAX_AMPDU_1024K = 7
+};
+
 #define IEEE80211_HT_MAX_AMPDU_FACTOR 13
 
 /* Minimum MPDU start spacing */
@@ -1998,6 +2013,11 @@ enum ieee80211_tdls_actioncode {
 	WLAN_TDLS_DISCOVERY_REQUEST = 10,
 };
 
+/* Extended Channel Switching capability to be set in the 1st byte of
+ * the @WLAN_EID_EXT_CAPABILITY information element
+ */
+#define WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING	BIT(2)
+
 /* Interworking capabilities are set in 7th bit of 4th byte of the
  * @WLAN_EID_EXT_CAPABILITY information element
  */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a2ddcf2398fd..5c3acd07acd9 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -319,9 +319,12 @@ struct ieee80211_supported_band {
 /**
  * struct vif_params - describes virtual interface parameters
  * @use_4addr: use 4-address frames
- * @macaddr: address to use for this virtual interface. This will only
- * 	be used for non-netdevice interfaces. If this parameter is set
- * 	to zero address the driver may determine the address as needed.
+ * @macaddr: address to use for this virtual interface.
+ *	If this parameter is set to zero address the driver may
+ *	determine the address as needed.
+ *	This feature is only fully supported by drivers that enable the
+ *	%NL80211_FEATURE_MAC_ON_CREATE flag.  Others may support creating
+ **	only p2p devices with specified MAC.
  */
 struct vif_params {
        int use_4addr;
@@ -799,6 +802,22 @@ struct station_parameters {
 };
 
 /**
+ * struct station_del_parameters - station deletion parameters
+ *
+ * Used to delete a station entry (or all stations).
+ *
+ * @mac: MAC address of the station to remove or NULL to remove all stations
+ * @subtype: Management frame subtype to use for indicating removal
+ *	(10 = Disassociation, 12 = Deauthentication)
+ * @reason_code: Reason code for the Disassociation/Deauthentication frame
+ */
+struct station_del_parameters {
+	const u8 *mac;
+	u8 subtype;
+	u16 reason_code;
+};
+
+/**
  * enum cfg80211_station_type - the type of station being modified
  * @CFG80211_STA_AP_CLIENT: client of an AP interface
  * @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has
@@ -1340,6 +1359,16 @@ struct mesh_setup {
 };
 
 /**
+ * struct ocb_setup - 802.11p OCB mode setup configuration
+ * @chandef: defines the channel to use
+ *
+ * These parameters are fixed when connecting to the network
+ */
+struct ocb_setup {
+	struct cfg80211_chan_def chandef;
+};
+
+/**
  * struct ieee80211_txq_params - TX queue parameters
  * @ac: AC identifier
  * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
@@ -2132,7 +2161,7 @@ struct cfg80211_qos_map {
  * @stop_ap: Stop being an AP, including stopping beaconing.
  *
  * @add_station: Add a new station.
- * @del_station: Remove a station; @mac may be NULL to remove all stations.
+ * @del_station: Remove a station
  * @change_station: Modify a given station. Note that flags changes are not much
  *	validated in cfg80211, in particular the auth/assoc/authorized flags
  *	might come to the driver in invalid combinations -- make sure to check
@@ -2146,6 +2175,8 @@ struct cfg80211_qos_map {
  * @change_mpath: change a given mesh path
  * @get_mpath: get a mesh path for the given parameters
  * @dump_mpath: dump mesh path callback -- resume dump at index @idx
+ * @get_mpp: get a mesh proxy path for the given parameters
+ * @dump_mpp: dump mesh proxy path callback -- resume dump at index @idx
  * @join_mesh: join the mesh network with the specified parameters
  *	(invoked with the wireless_dev mutex held)
  * @leave_mesh: leave the current mesh network
@@ -2331,6 +2362,11 @@ struct cfg80211_qos_map {
  *	with the peer followed by immediate teardown when the addition is later
  *	rejected)
  * @del_tx_ts: remove an existing TX TS
+ *
+ * @join_ocb: join the OCB network with the specified parameters
+ *	(invoked with the wireless_dev mutex held)
+ * @leave_ocb: leave the current OCB network
+ *	(invoked with the wireless_dev mutex held)
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2376,7 +2412,7 @@ struct cfg80211_ops {
 			       const u8 *mac,
 			       struct station_parameters *params);
 	int	(*del_station)(struct wiphy *wiphy, struct net_device *dev,
-			       const u8 *mac);
+			       struct station_del_parameters *params);
 	int	(*change_station)(struct wiphy *wiphy, struct net_device *dev,
 				  const u8 *mac,
 				  struct station_parameters *params);
@@ -2396,6 +2432,11 @@ struct cfg80211_ops {
 	int	(*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
 			      int idx, u8 *dst, u8 *next_hop,
 			      struct mpath_info *pinfo);
+	int	(*get_mpp)(struct wiphy *wiphy, struct net_device *dev,
+			   u8 *dst, u8 *mpp, struct mpath_info *pinfo);
+	int	(*dump_mpp)(struct wiphy *wiphy, struct net_device *dev,
+			    int idx, u8 *dst, u8 *mpp,
+			    struct mpath_info *pinfo);
 	int	(*get_mesh_config)(struct wiphy *wiphy,
 				struct net_device *dev,
 				struct mesh_config *conf);
@@ -2407,6 +2448,10 @@ struct cfg80211_ops {
 			     const struct mesh_setup *setup);
 	int	(*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
 
+	int	(*join_ocb)(struct wiphy *wiphy, struct net_device *dev,
+			    struct ocb_setup *setup);
+	int	(*leave_ocb)(struct wiphy *wiphy, struct net_device *dev);
+
 	int	(*change_bss)(struct wiphy *wiphy, struct net_device *dev,
 			      struct bss_parameters *params);
 
@@ -2623,13 +2668,9 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
  * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in
  *	beaconing mode (AP, IBSS, Mesh, ...).
- * @WIPHY_FLAG_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
- *	TSPEC sessions (TID aka TSID 0-7) with the NL80211_CMD_ADD_TX_TS
- *	command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
- *	needs to be able to handle Block-Ack agreements and other things.
  */
 enum wiphy_flags {
-	WIPHY_FLAG_SUPPORTS_WMM_ADMISSION	= BIT(0),
+	/* use hole at 0 */
 	/* use hole at 1 */
 	/* use hole at 2 */
 	WIPHY_FLAG_NETNS_OK			= BIT(3),
@@ -3166,6 +3207,23 @@ static inline const char *wiphy_name(const struct wiphy *wiphy)
 }
 
 /**
+ * wiphy_new_nm - create a new wiphy for use with cfg80211
+ *
+ * @ops: The configuration operations for this device
+ * @sizeof_priv: The size of the private area to allocate
+ * @requested_name: Request a particular name.
+ *	NULL is valid value, and means use the default phy%d naming.
+ *
+ * Create a new wiphy and associate the given operations with it.
+ * @sizeof_priv bytes are allocated for private use.
+ *
+ * Return: A pointer to the new wiphy. This pointer must be
+ * assigned to each netdev's ieee80211_ptr for proper operation.
+ */
+struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv,
+			   const char *requested_name);
+
+/**
  * wiphy_new - create a new wiphy for use with cfg80211
  *
  * @ops: The configuration operations for this device
@@ -3177,7 +3235,11 @@ static inline const char *wiphy_name(const struct wiphy *wiphy)
  * Return: A pointer to the new wiphy. This pointer must be
  * assigned to each netdev's ieee80211_ptr for proper operation.
  */
-struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
+static inline struct wiphy *wiphy_new(const struct cfg80211_ops *ops,
+				      int sizeof_priv)
+{
+	return wiphy_new_nm(ops, sizeof_priv, NULL);
+}
 
 /**
  * wiphy_register - register a wiphy with cfg80211
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 0ad1f47d2dc7..5f203a6a5e7e 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -263,6 +263,7 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
  *	note that this is only called when it changes after the channel
  *	context had been assigned.
+ * @BSS_CHANGED_OCB: OCB join status changed
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -287,6 +288,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_P2P_PS		= 1<<19,
 	BSS_CHANGED_BEACON_INFO		= 1<<20,
 	BSS_CHANGED_BANDWIDTH		= 1<<21,
+	BSS_CHANGED_OCB                 = 1<<22,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -739,7 +741,8 @@ struct ieee80211_tx_info {
 			u8 ampdu_ack_len;
 			u8 ampdu_len;
 			u8 antenna;
-			void *status_driver_data[21 / sizeof(void *)];
+			u16 tx_time;
+			void *status_driver_data[19 / sizeof(void *)];
 		} status;
 		struct {
 			struct ieee80211_tx_rate driver_rates[
@@ -1117,6 +1120,8 @@ struct ieee80211_conf {
  *	Function (TSF) timer when the frame containing the channel switch
  *	announcement was received. This is simply the rx.mactime parameter
  *	the driver passed into mac80211.
+ * @device_timestamp: arbitrary timestamp for the device, this is the
+ *	rx.device_timestamp parameter the driver passed to mac80211.
  * @block_tx: Indicates whether transmission must be blocked before the
  *	scheduled channel switch, as indicated by the AP.
  * @chandef: the new channel to switch to
@@ -1124,6 +1129,7 @@ struct ieee80211_conf {
  */
 struct ieee80211_channel_switch {
 	u64 timestamp;
+	u32 device_timestamp;
 	bool block_tx;
 	struct cfg80211_chan_def chandef;
 	u8 count;
@@ -1423,6 +1429,8 @@ struct ieee80211_sta_rates {
  * @smps_mode: current SMPS mode (off, static or dynamic)
  * @rates: rate control selection table
  * @tdls: indicates whether the STA is a TDLS peer
+ * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
+ *	valid if the STA is a TDLS peer in the first place.
  */
 struct ieee80211_sta {
 	u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1438,6 +1446,7 @@ struct ieee80211_sta {
 	enum ieee80211_smps_mode smps_mode;
 	struct ieee80211_sta_rates __rcu *rates;
 	bool tdls;
+	bool tdls_initiator;
 
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
@@ -1576,6 +1585,10 @@ struct ieee80211_tx_control {
  *	a virtual monitor interface when monitor interfaces are the only
  *	active interfaces.
  *
+ * @IEEE80211_HW_NO_AUTO_VIF: The driver would like for no wlanX to
+ *	be created.  It is expected user-space will create vifs as
+ *	desired (and thus have them named as desired).
+ *
  * @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface
  *	queue mapping in order to use different queues (not just one per AC)
  *	for different virtual interfaces. See the doc section on HW queue
@@ -1622,7 +1635,8 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<12,
 	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
 	IEEE80211_HW_WANT_MONITOR_VIF			= 1<<14,
-	/* free slots */
+	IEEE80211_HW_NO_AUTO_VIF			= 1<<15,
+	/* free slot */
 	IEEE80211_HW_SUPPORTS_UAPSD			= 1<<17,
 	IEEE80211_HW_REPORTS_TX_ACK_STATUS		= 1<<18,
 	IEEE80211_HW_CONNECTION_MONITOR			= 1<<19,
@@ -2375,6 +2389,22 @@ enum ieee80211_roc_type {
 };
 
 /**
+ * enum ieee80211_reconfig_complete_type - reconfig type
+ *
+ * This enum is used by the reconfig_complete() callback to indicate what
+ * reconfiguration type was completed.
+ *
+ * @IEEE80211_RECONFIG_TYPE_RESTART: hw restart type
+ *	(also due to resume() callback returning 1)
+ * @IEEE80211_RECONFIG_TYPE_SUSPEND: suspend type (regardless
+ *	of wowlan configuration)
+ */
+enum ieee80211_reconfig_type {
+	IEEE80211_RECONFIG_TYPE_RESTART,
+	IEEE80211_RECONFIG_TYPE_SUSPEND,
+};
+
+/**
  * struct ieee80211_ops - callbacks from mac80211 to the driver
  *
  * This structure contains various callbacks that the driver may
@@ -2809,11 +2839,11 @@ enum ieee80211_roc_type {
  *	disabled/enabled via @bss_info_changed.
  * @stop_ap: Stop operation on the AP interface.
  *
- * @restart_complete: Called after a call to ieee80211_restart_hw(), when the
- *	reconfiguration has completed. This can help the driver implement the
- *	reconfiguration step. Also called when reconfiguring because the
- *	driver's resume function returned 1, as this is just like an "inline"
- *	hardware restart. This callback may sleep.
+ * @reconfig_complete: Called after a call to ieee80211_restart_hw() and
+ *	during resume, when the reconfiguration has completed.
+ *	This can help the driver implement the reconfiguration step (and
+ *	indicate mac80211 is ready to receive frames).
+ *	This callback may sleep.
  *
  * @ipv6_addr_change: IPv6 address assignment on the given interface changed.
  *	Currently, this is only called for managed or P2P client interfaces.
@@ -2829,6 +2859,13 @@ enum ieee80211_roc_type {
  *	transmitted and then call ieee80211_csa_finish().
  *	If the CSA count starts as zero or 1, this function will not be called,
  *	since there won't be any time to beacon before the switch anyway.
+ * @pre_channel_switch: This is an optional callback that is called
+ *	before a channel switch procedure is started (ie. when a STA
+ *	gets a CSA or an userspace initiated channel-switch), allowing
+ *	the driver to prepare for the channel switch.
+ * @post_channel_switch: This is an optional callback that is called
+ *	after a channel switch procedure is completed, allowing the
+ *	driver to go back to a normal configuration.
  *
  * @join_ibss: Join an IBSS (on an IBSS interface); this is called after all
  *	information in bss_conf is set up and the beacon can be retrieved. A
@@ -2838,6 +2875,9 @@ enum ieee80211_roc_type {
  * @get_expected_throughput: extract the expected throughput towards the
  *	specified station. The returned value is expressed in Kbps. It returns 0
  *	if the RC algorithm does not have proper data to provide.
+ *
+ * @get_txpower: get current maximum tx power (in dBm) based on configuration
+ *	and hardware limits.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -2959,6 +2999,7 @@ struct ieee80211_ops {
 	void (*flush)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		      u32 queues, bool drop);
 	void (*channel_switch)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
 			       struct ieee80211_channel_switch *ch_switch);
 	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
 	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
@@ -3025,7 +3066,8 @@ struct ieee80211_ops {
 				  int n_vifs,
 				  enum ieee80211_chanctx_switch_mode mode);
 
-	void (*restart_complete)(struct ieee80211_hw *hw);
+	void (*reconfig_complete)(struct ieee80211_hw *hw,
+				  enum ieee80211_reconfig_type reconfig_type);
 
 #if IS_ENABLED(CONFIG_IPV6)
 	void (*ipv6_addr_change)(struct ieee80211_hw *hw,
@@ -3035,14 +3077,42 @@ struct ieee80211_ops {
 	void (*channel_switch_beacon)(struct ieee80211_hw *hw,
 				      struct ieee80211_vif *vif,
 				      struct cfg80211_chan_def *chandef);
+	int (*pre_channel_switch)(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_channel_switch *ch_switch);
+
+	int (*post_channel_switch)(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif);
 
 	int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 	void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 	u32 (*get_expected_throughput)(struct ieee80211_sta *sta);
+	int (*get_txpower)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			   int *dbm);
 };
 
 /**
- * ieee80211_alloc_hw -  Allocate a new hardware device
+ * ieee80211_alloc_hw_nm - Allocate a new hardware device
+ *
+ * This must be called once for each hardware device. The returned pointer
+ * must be used to refer to this device when calling other functions.
+ * mac80211 allocates a private data area for the driver pointed to by
+ * @priv in &struct ieee80211_hw, the size of this area is given as
+ * @priv_data_len.
+ *
+ * @priv_data_len: length of private data
+ * @ops: callbacks for this device
+ * @requested_name: Requested name for this device.
+ *	NULL is valid value, and means use the default naming (phy%d)
+ *
+ * Return: A pointer to the new hardware device, or %NULL on error.
+ */
+struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
+					   const struct ieee80211_ops *ops,
+					   const char *requested_name);
+
+/**
+ * ieee80211_alloc_hw - Allocate a new hardware device
  *
  * This must be called once for each hardware device. The returned pointer
  * must be used to refer to this device when calling other functions.
@@ -3055,8 +3125,12 @@ struct ieee80211_ops {
  *
  * Return: A pointer to the new hardware device, or %NULL on error.
  */
+static inline
 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
-					const struct ieee80211_ops *ops);
+					const struct ieee80211_ops *ops)
+{
+	return ieee80211_alloc_hw_nm(priv_data_len, ops, NULL);
+}
 
 /**
  * ieee80211_register_hw - Register hardware device
@@ -4172,6 +4246,22 @@ void ieee80211_iterate_active_interfaces_rtnl(struct ieee80211_hw *hw,
 					      void *data);
 
 /**
+ * ieee80211_iterate_stations_atomic - iterate stations
+ *
+ * This function iterates over all stations associated with a given
+ * hardware that are currently uploaded to the driver and calls the callback
+ * function for them.
+ * This function requires the iterator callback function to be atomic,
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_stations_atomic(struct ieee80211_hw *hw,
+				       void (*iterator)(void *data,
+						struct ieee80211_sta *sta),
+				       void *data);
+/**
  * ieee80211_queue_work - add work onto the mac80211 workqueue
  *
  * Drivers and mac80211 use this to add work onto the mac80211 workqueue.
@@ -4888,4 +4978,32 @@ void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf);
 void ieee80211_tdls_oper_request(struct ieee80211_vif *vif, const u8 *peer,
 				 enum nl80211_tdls_operation oper,
 				 u16 reason_code, gfp_t gfp);
+
+/**
+ * ieee80211_ie_split - split an IE buffer according to ordering
+ *
+ * @ies: the IE buffer
+ * @ielen: the length of the IE buffer
+ * @ids: an array with element IDs that are allowed before
+ *	the split
+ * @n_ids: the size of the element ID array
+ * @offset: offset where to start splitting in the buffer
+ *
+ * This function splits an IE buffer by updating the @offset
+ * variable to point to the location where the buffer should be
+ * split.
+ *
+ * It assumes that the given IE buffer is well-formed, this
+ * has to be guaranteed by the caller!
+ *
+ * It also assumes that the IEs in the buffer are ordered
+ * correctly, if not the result of using this function will not
+ * be ordered correctly either, i.e. it does no reordering.
+ *
+ * The function returns the offset where the next part of the
+ * buffer starts, which may be @ielen if the entire (remainder)
+ * of the buffer should be used.
+ */
+size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
+			  const u8 *ids, int n_ids, size_t offset);
 #endif /* MAC80211_H */
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 4b28dc07bcb1..9b3025e4377a 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -227,7 +227,11 @@
  *	the interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
  *	or, if no MAC address given, all stations, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
+ *	by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
+ *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
+ *	of disconnection indication should be sent to the station
+ *	(Deauthentication or Disassociation frame and reason code for that
+ *	frame).
  *
  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
  * 	destination %NL80211_ATTR_MAC on the interface identified by
@@ -738,6 +742,15 @@
  *	before removing a station entry entirely, or before disassociating
  *	or similar, cleanup will happen in the driver/device in this case.
  *
+ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
+ *	bandwidth of a channel must be given.
+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
+ *	network is determined by the network interface.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -912,6 +925,11 @@ enum nl80211_commands {
 	NL80211_CMD_ADD_TX_TS,
 	NL80211_CMD_DEL_TX_TS,
 
+	NL80211_CMD_GET_MPP,
+
+	NL80211_CMD_JOIN_OCB,
+	NL80211_CMD_LEAVE_OCB,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2064,6 +2082,8 @@ enum nl80211_attrs {
  *	and therefore can't be created in the normal ways, use the
  *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
  *	commands to create and destroy one
+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
+ *	This mode corresponds to the MIB variable dot11OCBActivated=true
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @NUM_NL80211_IFTYPES: number of defined interface types
  *
@@ -2083,6 +2103,7 @@ enum nl80211_iftype {
 	NL80211_IFTYPE_P2P_CLIENT,
 	NL80211_IFTYPE_P2P_GO,
 	NL80211_IFTYPE_P2P_DEVICE,
+	NL80211_IFTYPE_OCB,
 
 	/* keep last */
 	NUM_NL80211_IFTYPES,
@@ -4042,6 +4063,13 @@ enum nl80211_ap_sme_features {
  *	multiplexing powersave, ie. can turn off all but one chain
  *	and then wake the rest up as required after, for example,
  *	rts/cts handshake.
+ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
+ *	TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
+ *	command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
+ *	needs to be able to handle Block-Ack agreements and other things.
+ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
+ *	the vif's MAC address upon creation.
+ *	See 'macaddr' field in the vif_params (cfg80211.h).
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
@@ -4070,6 +4098,8 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_ACKTO_ESTIMATION		= 1 << 23,
 	NL80211_FEATURE_STATIC_SMPS			= 1 << 24,
 	NL80211_FEATURE_DYNAMIC_SMPS			= 1 << 25,
+	NL80211_FEATURE_SUPPORTS_WMM_ADMISSION		= 1 << 26,
+	NL80211_FEATURE_MAC_ON_CREATE			= 1 << 27,
 };
 
 /**