Merge tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Various small bugfixes and enhancements, plus two new drivers:
   - A quite complex ab8500 charger driver, submitted by Arun Murthy @
     ST-Ericsson;
   - Summit Microelectronics SMB347 Battery Charger, submitted by Bruce
     E Robertson and Alan Cox @ Intel.

  And that's all."

* tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6: (36 commits)
  max17042_battery: Clean up interrupt handling
  Revert "max8998_charger: Include linux/module.h just once"
  ab8500_fg: Fix some build warnings on x86_64
  max17042_battery: Fix CHARGE_FULL representation.
  max8998_charger: Include linux/module.h just once
  power_supply: Convert i2c drivers to module_i2c_driver
  lp8727_charger: Add MODULE_DEVICE_TABLE
  charger-manager: Simplify charger_get_property(), get rid of a warning
  charger-manager: Clean up for better readability
  da9052-battery: Convert to use module_platform_driver
  da9052-battery: Fix a memory leak when unload the module
  da9052-battery: Add missing platform_set_drvdata
  ab8500: Turn unneeded global symbols into local ones
  ab8500_fg: Fix copy-paste error
  ab8500_fg: Get rid of 'struct battery_type'
  ab8500_fg: Get rid of 'struct v_to_cap'
  ab8500_btemp: Get rid of 'enum adc_therm'
  ab8500_charger: Convert to the new USB OTG calls
  ab8500-btemp: AB8500 battery temperature driver
  ab8500-fg: A8500 fuel gauge driver
  ...

6 files changed, 1002 insertions, 11 deletions

diff --git a/include/linux/lp8727.h b/include/linux/lp8727.h
index d21fa2865bf4..ea98c6133d32 100644
--- a/include/linux/lp8727.h
+++ b/include/linux/lp8727.h
@@ -1,4 +1,7 @@
 /*
+ * LP8727 Micro/Mini USB IC with integrated charger
+ *
+ *			Copyright (C) 2011 Texas Instruments
  *			Copyright (C) 2011 National Semiconductor
  *
  * This program is free software; you can redistribute it and/or modify
@@ -32,13 +35,24 @@ enum lp8727_ichg {
 	ICHG_1000mA,
 };
 
+/**
+ * struct lp8727_chg_param
+ * @eoc_level : end of charge level setting
+ * @ichg : charging current
+ */
 struct lp8727_chg_param {
-	/* end of charge level setting */
 	enum lp8727_eoc_level eoc_level;
-	/* charging current */
 	enum lp8727_ichg ichg;
 };
 
+/**
+ * struct lp8727_platform_data
+ * @get_batt_present : check battery status - exists or not
+ * @get_batt_level : get battery voltage (mV)
+ * @get_batt_capacity : get battery capacity (%)
+ * @get_batt_temp : get battery temperature
+ * @ac, @usb : charging parameters each charger type
+ */
 struct lp8727_platform_data {
 	u8 (*get_batt_present)(void);
 	u16 (*get_batt_level)(void);
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 5fa697477b71..ee96cd51d8b2 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -146,6 +146,279 @@ struct abx500_init_settings {
 	u8 setting;
 };
 
+/* Battery driver related data */
+/*
+ * ADC for the battery thermistor.
+ * When using the ABx500_ADC_THERM_BATCTRL the battery ID resistor is combined
+ * with a NTC resistor to both identify the battery and to measure its
+ * temperature. Different phone manufactures uses different techniques to both
+ * identify the battery and to read its temperature.
+ */
+enum abx500_adc_therm {
+	ABx500_ADC_THERM_BATCTRL,
+	ABx500_ADC_THERM_BATTEMP,
+};
+
+/**
+ * struct abx500_res_to_temp - defines one point in a temp to res curve. To
+ * be used in battery packs that combines the identification resistor with a
+ * NTC resistor.
+ * @temp:			battery pack temperature in Celcius
+ * @resist:			NTC resistor net total resistance
+ */
+struct abx500_res_to_temp {
+	int temp;
+	int resist;
+};
+
+/**
+ * struct abx500_v_to_cap - Table for translating voltage to capacity
+ * @voltage:		Voltage in mV
+ * @capacity:		Capacity in percent
+ */
+struct abx500_v_to_cap {
+	int voltage;
+	int capacity;
+};
+
+/* Forward declaration */
+struct abx500_fg;
+
+/**
+ * struct abx500_fg_parameters - Fuel gauge algorithm parameters, in seconds
+ * if not specified
+ * @recovery_sleep_timer:	Time between measurements while recovering
+ * @recovery_total_time:	Total recovery time
+ * @init_timer:			Measurement interval during startup
+ * @init_discard_time:		Time we discard voltage measurement at startup
+ * @init_total_time:		Total init time during startup
+ * @high_curr_time:		Time current has to be high to go to recovery
+ * @accu_charging:		FG accumulation time while charging
+ * @accu_high_curr:		FG accumulation time in high current mode
+ * @high_curr_threshold:	High current threshold, in mA
+ * @lowbat_threshold:		Low battery threshold, in mV
+ * @overbat_threshold:		Over battery threshold, in mV
+ * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
+ *				Resolution in 50 mV step.
+ * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
+ *				Resolution in 50 mV step.
+ * @user_cap_limit		Capacity reported from user must be within this
+ *				limit to be considered as sane, in percentage
+ *				points.
+ * @maint_thres			This is the threshold where we stop reporting
+ *				battery full while in maintenance, in per cent
+ */
+struct abx500_fg_parameters {
+	int recovery_sleep_timer;
+	int recovery_total_time;
+	int init_timer;
+	int init_discard_time;
+	int init_total_time;
+	int high_curr_time;
+	int accu_charging;
+	int accu_high_curr;
+	int high_curr_threshold;
+	int lowbat_threshold;
+	int overbat_threshold;
+	int battok_falling_th_sel0;
+	int battok_raising_th_sel1;
+	int user_cap_limit;
+	int maint_thres;
+};
+
+/**
+ * struct abx500_charger_maximization - struct used by the board config.
+ * @use_maxi:		Enable maximization for this battery type
+ * @maxi_chg_curr:	Maximum charger current allowed
+ * @maxi_wait_cycles:	cycles to wait before setting charger current
+ * @charger_curr_step	delta between two charger current settings (mA)
+ */
+struct abx500_maxim_parameters {
+	bool ena_maxi;
+	int chg_curr;
+	int wait_cycles;
+	int charger_curr_step;
+};
+
+/**
+ * struct abx500_battery_type - different batteries supported
+ * @name:			battery technology
+ * @resis_high:			battery upper resistance limit
+ * @resis_low:			battery lower resistance limit
+ * @charge_full_design:		Maximum battery capacity in mAh
+ * @nominal_voltage:		Nominal voltage of the battery in mV
+ * @termination_vol:		max voltage upto which battery can be charged
+ * @termination_curr		battery charging termination current in mA
+ * @recharge_vol		battery voltage limit that will trigger a new
+ *				full charging cycle in the case where maintenan-
+ *				-ce charging has been disabled
+ * @normal_cur_lvl:		charger current in normal state in mA
+ * @normal_vol_lvl:		charger voltage in normal state in mV
+ * @maint_a_cur_lvl:		charger current in maintenance A state in mA
+ * @maint_a_vol_lvl:		charger voltage in maintenance A state in mV
+ * @maint_a_chg_timer_h:	charge time in maintenance A state
+ * @maint_b_cur_lvl:		charger current in maintenance B state in mA
+ * @maint_b_vol_lvl:		charger voltage in maintenance B state in mV
+ * @maint_b_chg_timer_h:	charge time in maintenance B state
+ * @low_high_cur_lvl:		charger current in temp low/high state in mA
+ * @low_high_vol_lvl:		charger voltage in temp low/high state in mV'
+ * @battery_resistance:		battery inner resistance in mOhm.
+ * @n_r_t_tbl_elements:		number of elements in r_to_t_tbl
+ * @r_to_t_tbl:			table containing resistance to temp points
+ * @n_v_cap_tbl_elements:	number of elements in v_to_cap_tbl
+ * @v_to_cap_tbl:		Voltage to capacity (in %) table
+ * @n_batres_tbl_elements	number of elements in the batres_tbl
+ * @batres_tbl			battery internal resistance vs temperature table
+ */
+struct abx500_battery_type {
+	int name;
+	int resis_high;
+	int resis_low;
+	int charge_full_design;
+	int nominal_voltage;
+	int termination_vol;
+	int termination_curr;
+	int recharge_vol;
+	int normal_cur_lvl;
+	int normal_vol_lvl;
+	int maint_a_cur_lvl;
+	int maint_a_vol_lvl;
+	int maint_a_chg_timer_h;
+	int maint_b_cur_lvl;
+	int maint_b_vol_lvl;
+	int maint_b_chg_timer_h;
+	int low_high_cur_lvl;
+	int low_high_vol_lvl;
+	int battery_resistance;
+	int n_temp_tbl_elements;
+	struct abx500_res_to_temp *r_to_t_tbl;
+	int n_v_cap_tbl_elements;
+	struct abx500_v_to_cap *v_to_cap_tbl;
+	int n_batres_tbl_elements;
+	struct batres_vs_temp *batres_tbl;
+};
+
+/**
+ * struct abx500_bm_capacity_levels - abx500 capacity level data
+ * @critical:		critical capacity level in percent
+ * @low:		low capacity level in percent
+ * @normal:		normal capacity level in percent
+ * @high:		high capacity level in percent
+ * @full:		full capacity level in percent
+ */
+struct abx500_bm_capacity_levels {
+	int critical;
+	int low;
+	int normal;
+	int high;
+	int full;
+};
+
+/**
+ * struct abx500_bm_charger_parameters - Charger specific parameters
+ * @usb_volt_max:	maximum allowed USB charger voltage in mV
+ * @usb_curr_max:	maximum allowed USB charger current in mA
+ * @ac_volt_max:	maximum allowed AC charger voltage in mV
+ * @ac_curr_max:	maximum allowed AC charger current in mA
+ */
+struct abx500_bm_charger_parameters {
+	int usb_volt_max;
+	int usb_curr_max;
+	int ac_volt_max;
+	int ac_curr_max;
+};
+
+/**
+ * struct abx500_bm_data - abx500 battery management data
+ * @temp_under		under this temp, charging is stopped
+ * @temp_low		between this temp and temp_under charging is reduced
+ * @temp_high		between this temp and temp_over charging is reduced
+ * @temp_over		over this temp, charging is stopped
+ * @temp_now		present battery temperature
+ * @temp_interval_chg	temperature measurement interval in s when charging
+ * @temp_interval_nochg	temperature measurement interval in s when not charging
+ * @main_safety_tmr_h	safety timer for main charger
+ * @usb_safety_tmr_h	safety timer for usb charger
+ * @bkup_bat_v		voltage which we charge the backup battery with
+ * @bkup_bat_i		current which we charge the backup battery with
+ * @no_maintenance	indicates that maintenance charging is disabled
+ * @abx500_adc_therm	placement of thermistor, batctrl or battemp adc
+ * @chg_unknown_bat	flag to enable charging of unknown batteries
+ * @enable_overshoot	flag to enable VBAT overshoot control
+ * @auto_trig		flag to enable auto adc trigger
+ * @fg_res		resistance of FG resistor in 0.1mOhm
+ * @n_btypes		number of elements in array bat_type
+ * @batt_id		index of the identified battery in array bat_type
+ * @interval_charging	charge alg cycle period time when charging (sec)
+ * @interval_not_charging charge alg cycle period time when not charging (sec)
+ * @temp_hysteresis	temperature hysteresis
+ * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
+ * @maxi:		maximization parameters
+ * @cap_levels		capacity in percent for the different capacity levels
+ * @bat_type		table of supported battery types
+ * @chg_params		charger parameters
+ * @fg_params		fuel gauge parameters
+ */
+struct abx500_bm_data {
+	int temp_under;
+	int temp_low;
+	int temp_high;
+	int temp_over;
+	int temp_now;
+	int temp_interval_chg;
+	int temp_interval_nochg;
+	int main_safety_tmr_h;
+	int usb_safety_tmr_h;
+	int bkup_bat_v;
+	int bkup_bat_i;
+	bool no_maintenance;
+	bool chg_unknown_bat;
+	bool enable_overshoot;
+	bool auto_trig;
+	enum abx500_adc_therm adc_therm;
+	int fg_res;
+	int n_btypes;
+	int batt_id;
+	int interval_charging;
+	int interval_not_charging;
+	int temp_hysteresis;
+	int gnd_lift_resistance;
+	const struct abx500_maxim_parameters *maxi;
+	const struct abx500_bm_capacity_levels *cap_levels;
+	const struct abx500_battery_type *bat_type;
+	const struct abx500_bm_charger_parameters *chg_params;
+	const struct abx500_fg_parameters *fg_params;
+};
+
+struct abx500_chargalg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_charger_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+	bool autopower_cfg;
+};
+
+struct abx500_btemp_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_fg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_bm_plat_data {
+	struct abx500_bm_data *battery;
+	struct abx500_charger_platform_data *charger;
+	struct abx500_btemp_platform_data *btemp;
+	struct abx500_fg_platform_data *fg;
+	struct abx500_chargalg_platform_data *chargalg;
+};
+
 int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
 	u8 value);
 int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
new file mode 100644
index 000000000000..44310c98ee6e
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -0,0 +1,474 @@
+/*
+ * Copyright ST-Ericsson 2012.
+ *
+ * Author: Arun Murthy <arun.murthy@stericsson.com>
+ * Licensed under GPLv2.
+ */
+
+#ifndef _AB8500_BM_H
+#define _AB8500_BM_H
+
+#include <linux/kernel.h>
+#include <linux/mfd/abx500.h>
+
+/*
+ * System control 2 register offsets.
+ * bank = 0x02
+ */
+#define AB8500_MAIN_WDOG_CTRL_REG	0x01
+#define AB8500_LOW_BAT_REG		0x03
+#define AB8500_BATT_OK_REG		0x04
+/*
+ * USB/ULPI register offsets
+ * Bank : 0x5
+ */
+#define AB8500_USB_LINE_STAT_REG	0x80
+
+/*
+ * Charger / status register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_STATUS1_REG		0x00
+#define AB8500_CH_STATUS2_REG		0x01
+#define AB8500_CH_USBCH_STAT1_REG	0x02
+#define AB8500_CH_USBCH_STAT2_REG	0x03
+#define AB8500_CH_FSM_STAT_REG		0x04
+#define AB8500_CH_STAT_REG		0x05
+
+/*
+ * Charger / control register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_VOLT_LVL_REG		0x40
+#define AB8500_CH_VOLT_LVL_MAX_REG	0x41  /*Only in Cut2.0*/
+#define AB8500_CH_OPT_CRNTLVL_REG	0x42
+#define AB8500_CH_OPT_CRNTLVL_MAX_REG	0x43  /*Only in Cut2.0*/
+#define AB8500_CH_WD_TIMER_REG		0x50
+#define AB8500_CHARG_WD_CTRL		0x51
+#define AB8500_BTEMP_HIGH_TH		0x52
+#define AB8500_LED_INDICATOR_PWM_CTRL	0x53
+#define AB8500_LED_INDICATOR_PWM_DUTY	0x54
+#define AB8500_BATT_OVV			0x55
+#define AB8500_CHARGER_CTRL		0x56
+#define AB8500_BAT_CTRL_CURRENT_SOURCE	0x60  /*Only in Cut2.0*/
+
+/*
+ * Charger / main control register offsets
+ * Bank : 0x0B
+ */
+#define AB8500_MCH_CTRL1		0x80
+#define AB8500_MCH_CTRL2		0x81
+#define AB8500_MCH_IPT_CURLVL_REG	0x82
+#define AB8500_CH_WD_REG		0x83
+
+/*
+ * Charger / USB control register offsets
+ * Bank : 0x0B
+ */
+#define AB8500_USBCH_CTRL1_REG		0xC0
+#define AB8500_USBCH_CTRL2_REG		0xC1
+#define AB8500_USBCH_IPT_CRNTLVL_REG	0xC2
+
+/*
+ * Gas Gauge register offsets
+ * Bank : 0x0C
+ */
+#define AB8500_GASG_CC_CTRL_REG		0x00
+#define AB8500_GASG_CC_ACCU1_REG	0x01
+#define AB8500_GASG_CC_ACCU2_REG	0x02
+#define AB8500_GASG_CC_ACCU3_REG	0x03
+#define AB8500_GASG_CC_ACCU4_REG	0x04
+#define AB8500_GASG_CC_SMPL_CNTRL_REG	0x05
+#define AB8500_GASG_CC_SMPL_CNTRH_REG	0x06
+#define AB8500_GASG_CC_SMPL_CNVL_REG	0x07
+#define AB8500_GASG_CC_SMPL_CNVH_REG	0x08
+#define AB8500_GASG_CC_CNTR_AVGOFF_REG	0x09
+#define AB8500_GASG_CC_OFFSET_REG	0x0A
+#define AB8500_GASG_CC_NCOV_ACCU	0x10
+#define AB8500_GASG_CC_NCOV_ACCU_CTRL	0x11
+#define AB8500_GASG_CC_NCOV_ACCU_LOW	0x12
+#define AB8500_GASG_CC_NCOV_ACCU_MED	0x13
+#define AB8500_GASG_CC_NCOV_ACCU_HIGH	0x14
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB8500_IT_SOURCE2_REG		0x01
+#define AB8500_IT_SOURCE21_REG		0x14
+
+/*
+ * RTC register offsets
+ * Bank: 0x0F
+ */
+#define AB8500_RTC_BACKUP_CHG_REG	0x0C
+#define AB8500_RTC_CC_CONF_REG		0x01
+#define AB8500_RTC_CTRL_REG		0x0B
+
+/*
+ * OTP register offsets
+ * Bank : 0x15
+ */
+#define AB8500_OTP_CONF_15		0x0E
+
+/* GPADC constants from AB8500 spec, UM0836 */
+#define ADC_RESOLUTION			1024
+#define ADC_CH_MAIN_MIN			0
+#define ADC_CH_MAIN_MAX			20030
+#define ADC_CH_VBUS_MIN			0
+#define ADC_CH_VBUS_MAX			20030
+#define ADC_CH_VBAT_MIN			2300
+#define ADC_CH_VBAT_MAX			4800
+#define ADC_CH_BKBAT_MIN		0
+#define ADC_CH_BKBAT_MAX		3200
+
+/* Main charge i/p current */
+#define MAIN_CH_IP_CUR_0P9A		0x80
+#define MAIN_CH_IP_CUR_1P0A		0x90
+#define MAIN_CH_IP_CUR_1P1A		0xA0
+#define MAIN_CH_IP_CUR_1P2A		0xB0
+#define MAIN_CH_IP_CUR_1P3A		0xC0
+#define MAIN_CH_IP_CUR_1P4A		0xD0
+#define MAIN_CH_IP_CUR_1P5A		0xE0
+
+/* ChVoltLevel */
+#define CH_VOL_LVL_3P5			0x00
+#define CH_VOL_LVL_4P0			0x14
+#define CH_VOL_LVL_4P05			0x16
+#define CH_VOL_LVL_4P1			0x1B
+#define CH_VOL_LVL_4P15			0x20
+#define CH_VOL_LVL_4P2			0x25
+#define CH_VOL_LVL_4P6			0x4D
+
+/* ChOutputCurrentLevel */
+#define CH_OP_CUR_LVL_0P1		0x00
+#define CH_OP_CUR_LVL_0P2		0x01
+#define CH_OP_CUR_LVL_0P3		0x02
+#define CH_OP_CUR_LVL_0P4		0x03
+#define CH_OP_CUR_LVL_0P5		0x04
+#define CH_OP_CUR_LVL_0P6		0x05
+#define CH_OP_CUR_LVL_0P7		0x06
+#define CH_OP_CUR_LVL_0P8		0x07
+#define CH_OP_CUR_LVL_0P9		0x08
+#define CH_OP_CUR_LVL_1P4		0x0D
+#define CH_OP_CUR_LVL_1P5		0x0E
+#define CH_OP_CUR_LVL_1P6		0x0F
+
+/* BTEMP High thermal limits */
+#define BTEMP_HIGH_TH_57_0		0x00
+#define BTEMP_HIGH_TH_52		0x01
+#define BTEMP_HIGH_TH_57_1		0x02
+#define BTEMP_HIGH_TH_62		0x03
+
+/* current is mA */
+#define USB_0P1A			100
+#define USB_0P2A			200
+#define USB_0P3A			300
+#define USB_0P4A			400
+#define USB_0P5A			500
+
+#define LOW_BAT_3P1V			0x20
+#define LOW_BAT_2P3V			0x00
+#define LOW_BAT_RESET			0x01
+#define LOW_BAT_ENABLE			0x01
+
+/* Backup battery constants */
+#define BUP_ICH_SEL_50UA		0x00
+#define BUP_ICH_SEL_150UA		0x04
+#define BUP_ICH_SEL_300UA		0x08
+#define BUP_ICH_SEL_700UA		0x0C
+
+#define BUP_VCH_SEL_2P5V		0x00
+#define BUP_VCH_SEL_2P6V		0x01
+#define BUP_VCH_SEL_2P8V		0x02
+#define BUP_VCH_SEL_3P1V		0x03
+
+/* Battery OVV constants */
+#define BATT_OVV_ENA			0x02
+#define BATT_OVV_TH_3P7			0x00
+#define BATT_OVV_TH_4P75		0x01
+
+/* A value to indicate over voltage */
+#define BATT_OVV_VALUE			4750
+
+/* VBUS OVV constants */
+#define VBUS_OVV_SELECT_MASK		0x78
+#define VBUS_OVV_SELECT_5P6V		0x00
+#define VBUS_OVV_SELECT_5P7V		0x08
+#define VBUS_OVV_SELECT_5P8V		0x10
+#define VBUS_OVV_SELECT_5P9V		0x18
+#define VBUS_OVV_SELECT_6P0V		0x20
+#define VBUS_OVV_SELECT_6P1V		0x28
+#define VBUS_OVV_SELECT_6P2V		0x30
+#define VBUS_OVV_SELECT_6P3V		0x38
+
+#define VBUS_AUTO_IN_CURR_LIM_ENA	0x04
+
+/* Fuel Gauge constants */
+#define RESET_ACCU			0x02
+#define READ_REQ			0x01
+#define CC_DEEP_SLEEP_ENA		0x02
+#define CC_PWR_UP_ENA			0x01
+#define CC_SAMPLES_40			0x28
+#define RD_NCONV_ACCU_REQ		0x01
+#define CC_CALIB			0x08
+#define CC_INTAVGOFFSET_ENA		0x10
+#define CC_MUXOFFSET			0x80
+#define CC_INT_CAL_N_AVG_MASK		0x60
+#define CC_INT_CAL_SAMPLES_16		0x40
+#define CC_INT_CAL_SAMPLES_8		0x20
+#define CC_INT_CAL_SAMPLES_4		0x00
+
+/* RTC constants */
+#define RTC_BUP_CH_ENA			0x10
+
+/* BatCtrl Current Source Constants */
+#define BAT_CTRL_7U_ENA			0x01
+#define BAT_CTRL_20U_ENA		0x02
+#define BAT_CTRL_CMP_ENA		0x04
+#define FORCE_BAT_CTRL_CMP_HIGH		0x08
+#define BAT_CTRL_PULL_UP_ENA		0x10
+
+/* Battery type */
+#define BATTERY_UNKNOWN			00
+
+/**
+ * struct res_to_temp - defines one point in a temp to res curve. To
+ * be used in battery packs that combines the identification resistor with a
+ * NTC resistor.
+ * @temp:			battery pack temperature in Celcius
+ * @resist:			NTC resistor net total resistance
+ */
+struct res_to_temp {
+	int temp;
+	int resist;
+};
+
+/**
+ * struct batres_vs_temp - defines one point in a temp vs battery internal
+ * resistance curve.
+ * @temp:			battery pack temperature in Celcius
+ * @resist:			battery internal reistance in mOhm
+ */
+struct batres_vs_temp {
+	int temp;
+	int resist;
+};
+
+/* Forward declaration */
+struct ab8500_fg;
+
+/**
+ * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds
+ * if not specified
+ * @recovery_sleep_timer:	Time between measurements while recovering
+ * @recovery_total_time:	Total recovery time
+ * @init_timer:			Measurement interval during startup
+ * @init_discard_time:		Time we discard voltage measurement at startup
+ * @init_total_time:		Total init time during startup
+ * @high_curr_time:		Time current has to be high to go to recovery
+ * @accu_charging:		FG accumulation time while charging
+ * @accu_high_curr:		FG accumulation time in high current mode
+ * @high_curr_threshold:	High current threshold, in mA
+ * @lowbat_threshold:		Low battery threshold, in mV
+ * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
+ *				Resolution in 50 mV step.
+ * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
+ *				Resolution in 50 mV step.
+ * @user_cap_limit		Capacity reported from user must be within this
+ *				limit to be considered as sane, in percentage
+ *				points.
+ * @maint_thres			This is the threshold where we stop reporting
+ *				battery full while in maintenance, in per cent
+ */
+struct ab8500_fg_parameters {
+	int recovery_sleep_timer;
+	int recovery_total_time;
+	int init_timer;
+	int init_discard_time;
+	int init_total_time;
+	int high_curr_time;
+	int accu_charging;
+	int accu_high_curr;
+	int high_curr_threshold;
+	int lowbat_threshold;
+	int battok_falling_th_sel0;
+	int battok_raising_th_sel1;
+	int user_cap_limit;
+	int maint_thres;
+};
+
+/**
+ * struct ab8500_charger_maximization - struct used by the board config.
+ * @use_maxi:		Enable maximization for this battery type
+ * @maxi_chg_curr:	Maximum charger current allowed
+ * @maxi_wait_cycles:	cycles to wait before setting charger current
+ * @charger_curr_step	delta between two charger current settings (mA)
+ */
+struct ab8500_maxim_parameters {
+	bool ena_maxi;
+	int chg_curr;
+	int wait_cycles;
+	int charger_curr_step;
+};
+
+/**
+ * struct ab8500_bm_capacity_levels - ab8500 capacity level data
+ * @critical:		critical capacity level in percent
+ * @low:		low capacity level in percent
+ * @normal:		normal capacity level in percent
+ * @high:		high capacity level in percent
+ * @full:		full capacity level in percent
+ */
+struct ab8500_bm_capacity_levels {
+	int critical;
+	int low;
+	int normal;
+	int high;
+	int full;
+};
+
+/**
+ * struct ab8500_bm_charger_parameters - Charger specific parameters
+ * @usb_volt_max:	maximum allowed USB charger voltage in mV
+ * @usb_curr_max:	maximum allowed USB charger current in mA
+ * @ac_volt_max:	maximum allowed AC charger voltage in mV
+ * @ac_curr_max:	maximum allowed AC charger current in mA
+ */
+struct ab8500_bm_charger_parameters {
+	int usb_volt_max;
+	int usb_curr_max;
+	int ac_volt_max;
+	int ac_curr_max;
+};
+
+/**
+ * struct ab8500_bm_data - ab8500 battery management data
+ * @temp_under		under this temp, charging is stopped
+ * @temp_low		between this temp and temp_under charging is reduced
+ * @temp_high		between this temp and temp_over charging is reduced
+ * @temp_over		over this temp, charging is stopped
+ * @temp_interval_chg	temperature measurement interval in s when charging
+ * @temp_interval_nochg	temperature measurement interval in s when not charging
+ * @main_safety_tmr_h	safety timer for main charger
+ * @usb_safety_tmr_h	safety timer for usb charger
+ * @bkup_bat_v		voltage which we charge the backup battery with
+ * @bkup_bat_i		current which we charge the backup battery with
+ * @no_maintenance	indicates that maintenance charging is disabled
+ * @adc_therm		placement of thermistor, batctrl or battemp adc
+ * @chg_unknown_bat	flag to enable charging of unknown batteries
+ * @enable_overshoot	flag to enable VBAT overshoot control
+ * @fg_res		resistance of FG resistor in 0.1mOhm
+ * @n_btypes		number of elements in array bat_type
+ * @batt_id		index of the identified battery in array bat_type
+ * @interval_charging	charge alg cycle period time when charging (sec)
+ * @interval_not_charging charge alg cycle period time when not charging (sec)
+ * @temp_hysteresis	temperature hysteresis
+ * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
+ * @maxi:		maximization parameters
+ * @cap_levels		capacity in percent for the different capacity levels
+ * @bat_type		table of supported battery types
+ * @chg_params		charger parameters
+ * @fg_params		fuel gauge parameters
+ */
+struct ab8500_bm_data {
+	int temp_under;
+	int temp_low;
+	int temp_high;
+	int temp_over;
+	int temp_interval_chg;
+	int temp_interval_nochg;
+	int main_safety_tmr_h;
+	int usb_safety_tmr_h;
+	int bkup_bat_v;
+	int bkup_bat_i;
+	bool no_maintenance;
+	bool chg_unknown_bat;
+	bool enable_overshoot;
+	enum abx500_adc_therm adc_therm;
+	int fg_res;
+	int n_btypes;
+	int batt_id;
+	int interval_charging;
+	int interval_not_charging;
+	int temp_hysteresis;
+	int gnd_lift_resistance;
+	const struct ab8500_maxim_parameters *maxi;
+	const struct ab8500_bm_capacity_levels *cap_levels;
+	const struct ab8500_bm_charger_parameters *chg_params;
+	const struct ab8500_fg_parameters *fg_params;
+};
+
+struct ab8500_charger_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+	bool autopower_cfg;
+};
+
+struct ab8500_btemp_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct ab8500_fg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct ab8500_chargalg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+struct ab8500_btemp;
+struct ab8500_gpadc;
+struct ab8500_fg;
+#ifdef CONFIG_AB8500_BM
+void ab8500_fg_reinit(void);
+void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
+struct ab8500_btemp *ab8500_btemp_get(void);
+int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);
+struct ab8500_fg *ab8500_fg_get(void);
+int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
+int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
+int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);
+int ab8500_fg_inst_curr_done(struct ab8500_fg *di);
+
+#else
+int ab8500_fg_inst_curr_done(struct ab8500_fg *di)
+{
+}
+static void ab8500_fg_reinit(void)
+{
+}
+static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA)
+{
+}
+static struct ab8500_btemp *ab8500_btemp_get(void)
+{
+	return NULL;
+}
+static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp)
+{
+	return 0;
+}
+struct ab8500_fg *ab8500_fg_get(void)
+{
+	return NULL;
+}
+static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev)
+{
+	return -ENODEV;
+}
+
+static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
+{
+	return -ENODEV;
+}
+
+static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
+{
+	return -ENODEV;
+}
+
+#endif
+#endif /* _AB8500_BM_H */
diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h
new file mode 100644
index 000000000000..9b07725750c9
--- /dev/null
+++ b/include/linux/mfd/abx500/ux500_chargalg.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _UX500_CHARGALG_H
+#define _UX500_CHARGALG_H
+
+#include <linux/power_supply.h>
+
+#define psy_to_ux500_charger(x) container_of((x), \
+		struct ux500_charger, psy)
+
+/* Forward declaration */
+struct ux500_charger;
+
+struct ux500_charger_ops {
+	int (*enable) (struct ux500_charger *, int, int, int);
+	int (*kick_wd) (struct ux500_charger *);
+	int (*update_curr) (struct ux500_charger *, int);
+};
+
+/**
+ * struct ux500_charger - power supply ux500 charger sub class
+ * @psy			power supply base class
+ * @ops			ux500 charger operations
+ * @max_out_volt	maximum output charger voltage in mV
+ * @max_out_curr	maximum output charger current in mA
+ */
+struct ux500_charger {
+	struct power_supply psy;
+	struct ux500_charger_ops ops;
+	int max_out_volt;
+	int max_out_curr;
+};
+
+#endif
diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h
index fe99211fb2b8..e01b167e66f0 100644
--- a/include/linux/power/max17042_battery.h
+++ b/include/linux/power/max17042_battery.h
@@ -27,6 +27,8 @@
 #define MAX17042_BATTERY_FULL	(100)
 #define MAX17042_DEFAULT_SNS_RESISTOR	(10000)
 
+#define MAX17042_CHARACTERIZATION_DATA_SIZE 48
+
 enum max17042_register {
 	MAX17042_STATUS		= 0x00,
 	MAX17042_VALRT_Th	= 0x01,
@@ -40,11 +42,11 @@ enum max17042_register {
 	MAX17042_VCELL		= 0x09,
 	MAX17042_Current	= 0x0A,
 	MAX17042_AvgCurrent	= 0x0B,
-	MAX17042_Qresidual	= 0x0C,
+
 	MAX17042_SOC		= 0x0D,
 	MAX17042_AvSOC		= 0x0E,
 	MAX17042_RemCap		= 0x0F,
-	MAX17402_FullCAP	= 0x10,
+	MAX17042_FullCAP	= 0x10,
 	MAX17042_TTE		= 0x11,
 	MAX17042_V_empty	= 0x12,
 
@@ -62,14 +64,14 @@ enum max17042_register {
 	MAX17042_AvCap		= 0x1F,
 	MAX17042_ManName	= 0x20,
 	MAX17042_DevName	= 0x21,
-	MAX17042_DevChem	= 0x22,
 
+	MAX17042_FullCAPNom	= 0x23,
 	MAX17042_TempNom	= 0x24,
-	MAX17042_TempCold	= 0x25,
+	MAX17042_TempLim	= 0x25,
 	MAX17042_TempHot	= 0x26,
 	MAX17042_AIN		= 0x27,
 	MAX17042_LearnCFG	= 0x28,
-	MAX17042_SHFTCFG	= 0x29,
+	MAX17042_FilterCFG	= 0x29,
 	MAX17042_RelaxCFG	= 0x2A,
 	MAX17042_MiscCFG	= 0x2B,
 	MAX17042_TGAIN		= 0x2C,
@@ -77,22 +79,41 @@ enum max17042_register {
 	MAX17042_CGAIN		= 0x2E,
 	MAX17042_COFF		= 0x2F,
 
-	MAX17042_Q_empty	= 0x33,
+	MAX17042_MaskSOC	= 0x32,
+	MAX17042_SOC_empty	= 0x33,
 	MAX17042_T_empty	= 0x34,
 
+	MAX17042_FullCAP0       = 0x35,
+	MAX17042_LAvg_empty	= 0x36,
+	MAX17042_FCTC		= 0x37,
 	MAX17042_RCOMP0		= 0x38,
 	MAX17042_TempCo		= 0x39,
-	MAX17042_Rx		= 0x3A,
-	MAX17042_T_empty0	= 0x3B,
+	MAX17042_EmptyTempCo	= 0x3A,
+	MAX17042_K_empty0	= 0x3B,
 	MAX17042_TaskPeriod	= 0x3C,
 	MAX17042_FSTAT		= 0x3D,
 
 	MAX17042_SHDNTIMER	= 0x3F,
 
-	MAX17042_VFRemCap	= 0x4A,
+	MAX17042_dQacc		= 0x45,
+	MAX17042_dPacc		= 0x46,
+
+	MAX17042_VFSOC0		= 0x48,
 
 	MAX17042_QH		= 0x4D,
 	MAX17042_QL		= 0x4E,
+
+	MAX17042_VFSOC0Enable	= 0x60,
+	MAX17042_MLOCKReg1	= 0x62,
+	MAX17042_MLOCKReg2	= 0x63,
+
+	MAX17042_MODELChrTbl	= 0x80,
+
+	MAX17042_OCV		= 0xEE,
+
+	MAX17042_OCVInternal	= 0xFB,
+
+	MAX17042_VFSOC		= 0xFF,
 };
 
 /*
@@ -105,10 +126,64 @@ struct max17042_reg_data {
 	u16 data;
 };
 
+struct max17042_config_data {
+	/* External current sense resistor value in milli-ohms */
+	u32	cur_sense_val;
+
+	/* A/D measurement */
+	u16	tgain;		/* 0x2C */
+	u16	toff;		/* 0x2D */
+	u16	cgain;		/* 0x2E */
+	u16	coff;		/* 0x2F */
+
+	/* Alert / Status */
+	u16	valrt_thresh;	/* 0x01 */
+	u16	talrt_thresh;	/* 0x02 */
+	u16	soc_alrt_thresh;	/* 0x03 */
+	u16	config;		/* 0x01D */
+	u16	shdntimer;	/* 0x03F */
+
+	/* App data */
+	u16	design_cap;	/* 0x18 */
+	u16	ichgt_term;	/* 0x1E */
+
+	/* MG3 config */
+	u16	at_rate;	/* 0x04 */
+	u16	learn_cfg;	/* 0x28 */
+	u16	filter_cfg;	/* 0x29 */
+	u16	relax_cfg;	/* 0x2A */
+	u16	misc_cfg;	/* 0x2B */
+	u16	masksoc;	/* 0x32 */
+
+	/* MG3 save and restore */
+	u16	fullcap;	/* 0x10 */
+	u16	fullcapnom;	/* 0x23 */
+	u16	socempty;	/* 0x33 */
+	u16	lavg_empty;	/* 0x36 */
+	u16	dqacc;		/* 0x45 */
+	u16	dpacc;		/* 0x46 */
+
+	/* Cell technology from power_supply.h */
+	u16	cell_technology;
+
+	/* Cell Data */
+	u16	vempty;		/* 0x12 */
+	u16	temp_nom;	/* 0x24 */
+	u16	temp_lim;	/* 0x25 */
+	u16	fctc;		/* 0x37 */
+	u16	rcomp0;		/* 0x38 */
+	u16	tcompc0;	/* 0x39 */
+	u16	empty_tempco;	/* 0x3A */
+	u16	kempty0;	/* 0x3B */
+	u16	cell_char_tbl[MAX17042_CHARACTERIZATION_DATA_SIZE];
+} __packed;
+
 struct max17042_platform_data {
 	struct max17042_reg_data *init_data;
+	struct max17042_config_data *config_data;
 	int num_init_data; /* Number of enties in init_data array */
 	bool enable_current_sense;
+	bool enable_por_init; /* Use POR init from Maxim appnote */
 
 	/*
 	 * R_sns in micro-ohms.
diff --git a/include/linux/power/smb347-charger.h b/include/linux/power/smb347-charger.h
new file mode 100644
index 000000000000..b3cb20dab55f
--- /dev/null
+++ b/include/linux/power/smb347-charger.h
@@ -0,0 +1,117 @@
+/*
+ * Summit Microelectronics SMB347 Battery Charger Driver
+ *
+ * Copyright (C) 2011, Intel Corporation
+ *
+ * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com>
+ *          Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SMB347_CHARGER_H
+#define SMB347_CHARGER_H
+
+#include <linux/types.h>
+#include <linux/power_supply.h>
+
+enum {
+	/* use the default compensation method */
+	SMB347_SOFT_TEMP_COMPENSATE_DEFAULT = -1,
+
+	SMB347_SOFT_TEMP_COMPENSATE_NONE,
+	SMB347_SOFT_TEMP_COMPENSATE_CURRENT,
+	SMB347_SOFT_TEMP_COMPENSATE_VOLTAGE,
+};
+
+/* Use default factory programmed value for hard/soft temperature limit */
+#define SMB347_TEMP_USE_DEFAULT		-273
+
+/*
+ * Charging enable can be controlled by software (via i2c) by
+ * smb347-charger driver or by EN pin (active low/high).
+ */
+enum smb347_chg_enable {
+	SMB347_CHG_ENABLE_SW,
+	SMB347_CHG_ENABLE_PIN_ACTIVE_LOW,
+	SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH,
+};
+
+/**
+ * struct smb347_charger_platform_data - platform data for SMB347 charger
+ * @battery_info: Information about the battery
+ * @max_charge_current: maximum current (in uA) the battery can be charged
+ * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
+ * @pre_charge_current: current (in uA) to use in pre-charging phase
+ * @termination_current: current (in uA) used to determine when the
+ *			 charging cycle terminates
+ * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
+ *			 pre-charge to fast charge mode
+ * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
+ * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
+ *			  input
+ * @chip_temp_threshold: die temperature where device starts limiting charge
+ *			 current [%100 - %130] (in degree C)
+ * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C),
+ *			  granularity is 5 deg C.
+ * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree  C),
+ *			 granularity is 5 deg C.
+ * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C),
+ *			  granularity is 5 deg C.
+ * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C),
+ *			 granularity is 5 deg C.
+ * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit
+ * @soft_temp_limit_compensation: compensation method when soft temperature
+ *				  limit is hit
+ * @charge_current_compensation: current (in uA) for charging compensation
+ *				 current when temperature hits soft limits
+ * @use_mains: AC/DC input can be used
+ * @use_usb: USB input can be used
+ * @use_usb_otg: USB OTG output can be used (not implemented yet)
+ * @irq_gpio: GPIO number used for interrupts (%-1 if not used)
+ * @enable_control: how charging enable/disable is controlled
+ *		    (driver/pin controls)
+ *
+ * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
+ * hardware support for these. This is useful when we want to have for
+ * example OTG charging controlled via OTG transceiver driver and not by
+ * the SMB347 hardware.
+ *
+ * Hard and soft temperature limit values are given as described in the
+ * device data sheet and assuming NTC beta value is %3750. Even if this is
+ * not the case, these values should be used. They can be mapped to the
+ * corresponding NTC beta values with the help of table %2 in the data
+ * sheet. So for example if NTC beta is %3375 and we want to program hard
+ * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50.
+ *
+ * If zero value is given in any of the current and voltage values, the
+ * factory programmed default will be used. For soft/hard temperature
+ * values, pass in %SMB347_TEMP_USE_DEFAULT instead.
+ */
+struct smb347_charger_platform_data {
+	struct power_supply_info battery_info;
+	unsigned int	max_charge_current;
+	unsigned int	max_charge_voltage;
+	unsigned int	pre_charge_current;
+	unsigned int	termination_current;
+	unsigned int	pre_to_fast_voltage;
+	unsigned int	mains_current_limit;
+	unsigned int	usb_hc_current_limit;
+	unsigned int	chip_temp_threshold;
+	int		soft_cold_temp_limit;
+	int		soft_hot_temp_limit;
+	int		hard_cold_temp_limit;
+	int		hard_hot_temp_limit;
+	bool		suspend_on_hard_temp_limit;
+	unsigned int	soft_temp_limit_compensation;
+	unsigned int	charge_current_compensation;
+	bool		use_mains;
+	bool		use_usb;
+	bool		use_usb_otg;
+	int		irq_gpio;
+	enum smb347_chg_enable enable_control;
+};
+
+#endif /* SMB347_CHARGER_H */