Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: early init for MFD running regulators
  mfd: fix tmio related warnings
  mfd: asic3: enable SD/SDIO cell
  mfd: asic3: enable DS1WM cell
  mfd: asic3: remove SD/SDIO controller register definitions
  mfd: asic3: use resource_size macro instead of local variable
  mfd: add ASIC3 IRQ numbers
  mfd: asic3: add clock handling for MFD cells
  mfd: asic3: add asic3_set_register common operation
  mfd: Fix Kconfig help text for WM8350
  mfd: add PCAP driver
  mfd: add U300 AB3100 core support
  drivers/mfd: remove obsolete irq_desc_t typedef
  mfd/pcf50633-gpio.c: add MODULE_LICENSE
  mfd: Mark WM8350 mask revision as readable to match silicon
  mfd: Mark clocks_init as non-init in twl4030-core.c
  mfd: Correct readability of WM8350 register 227

4 files changed, 375 insertions, 222 deletions

diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h
new file mode 100644
index 000000000000..7a3f316e3848
--- /dev/null
+++ b/include/linux/mfd/ab3100.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * AB3100 core access functions
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/device.h>
+
+#ifndef MFD_AB3100_H
+#define MFD_AB3100_H
+
+#define ABUNKNOWN	0
+#define	AB3000		1
+#define	AB3100		2
+
+/*
+ * AB3100, EVENTA1, A2 and A3 event register flags
+ * these are catenated into a single 32-bit flag in the code
+ * for event notification broadcasts.
+ */
+#define AB3100_EVENTA1_ONSWA				(0x01<<16)
+#define AB3100_EVENTA1_ONSWB				(0x02<<16)
+#define AB3100_EVENTA1_ONSWC				(0x04<<16)
+#define AB3100_EVENTA1_DCIO				(0x08<<16)
+#define AB3100_EVENTA1_OVER_TEMP			(0x10<<16)
+#define AB3100_EVENTA1_SIM_OFF				(0x20<<16)
+#define AB3100_EVENTA1_VBUS				(0x40<<16)
+#define AB3100_EVENTA1_VSET_USB				(0x80<<16)
+
+#define AB3100_EVENTA2_READY_TX				(0x01<<8)
+#define AB3100_EVENTA2_READY_RX				(0x02<<8)
+#define AB3100_EVENTA2_OVERRUN_ERROR			(0x04<<8)
+#define AB3100_EVENTA2_FRAMING_ERROR			(0x08<<8)
+#define AB3100_EVENTA2_CHARG_OVERCURRENT		(0x10<<8)
+#define AB3100_EVENTA2_MIDR				(0x20<<8)
+#define AB3100_EVENTA2_BATTERY_REM			(0x40<<8)
+#define AB3100_EVENTA2_ALARM				(0x80<<8)
+
+#define AB3100_EVENTA3_ADC_TRIG5			(0x01)
+#define AB3100_EVENTA3_ADC_TRIG4			(0x02)
+#define AB3100_EVENTA3_ADC_TRIG3			(0x04)
+#define AB3100_EVENTA3_ADC_TRIG2			(0x08)
+#define AB3100_EVENTA3_ADC_TRIGVBAT			(0x10)
+#define AB3100_EVENTA3_ADC_TRIGVTX			(0x20)
+#define AB3100_EVENTA3_ADC_TRIG1			(0x40)
+#define AB3100_EVENTA3_ADC_TRIG0			(0x80)
+
+/* AB3100, STR register flags */
+#define AB3100_STR_ONSWA				(0x01)
+#define AB3100_STR_ONSWB				(0x02)
+#define AB3100_STR_ONSWC				(0x04)
+#define AB3100_STR_DCIO					(0x08)
+#define AB3100_STR_BOOT_MODE				(0x10)
+#define AB3100_STR_SIM_OFF				(0x20)
+#define AB3100_STR_BATT_REMOVAL				(0x40)
+#define AB3100_STR_VBUS					(0x80)
+
+/**
+ * struct ab3100
+ * @access_mutex: lock out concurrent accesses to the AB3100 registers
+ * @dev: pointer to the containing device
+ * @i2c_client: I2C client for this chip
+ * @testreg_client: secondary client for test registers
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @work: an event handling worker
+ * @event_subscribers: event subscribers are listed here
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ *
+ * This struct is PRIVATE and devices using it should NOT
+ * access ANY fields. It is used as a token for calling the
+ * AB3100 functions.
+ */
+struct ab3100 {
+	struct mutex access_mutex;
+	struct device *dev;
+	struct i2c_client *i2c_client;
+	struct i2c_client *testreg_client;
+	char chip_name[32];
+	u8 chip_id;
+	struct work_struct work;
+	struct blocking_notifier_head event_subscribers;
+	u32 startup_events;
+	bool startup_events_read;
+};
+
+int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval);
+int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval);
+int ab3100_get_register_page(struct ab3100 *ab3100,
+			     u8 first_reg, u8 *regvals, u8 numregs);
+int ab3100_mask_and_set_register(struct ab3100 *ab3100,
+				 u8 reg, u8 andmask, u8 ormask);
+u8 ab3100_get_chip_type(struct ab3100 *ab3100);
+int ab3100_event_register(struct ab3100 *ab3100,
+			  struct notifier_block *nb);
+int ab3100_event_unregister(struct ab3100 *ab3100,
+			    struct notifier_block *nb);
+int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
+					     u32 *fatevent);
+
+#endif
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
index 322cd6deb9f0..de3c4ad19afb 100644
--- a/include/linux/mfd/asic3.h
+++ b/include/linux/mfd/asic3.h
@@ -30,6 +30,13 @@ struct asic3_platform_data {
 #define ASIC3_NUM_GPIOS		64
 #define ASIC3_NR_IRQS		ASIC3_NUM_GPIOS + 6
 
+#define ASIC3_IRQ_LED0		64
+#define ASIC3_IRQ_LED1		65
+#define ASIC3_IRQ_LED2		66
+#define ASIC3_IRQ_SPI		67
+#define ASIC3_IRQ_SMBUS		68
+#define ASIC3_IRQ_OWM		69
+
 #define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio))
 
 #define ASIC3_GPIO_BANK_A	0
@@ -227,8 +234,8 @@ struct asic3_platform_data {
 
 
 /* Basic control of the SD ASIC */
-#define ASIC3_SDHWCTRL_Base	0x0E00
-#define ASIC3_SDHWCTRL_SDConf    0x00
+#define ASIC3_SDHWCTRL_BASE     0x0E00
+#define ASIC3_SDHWCTRL_SDCONF     0x00
 
 #define ASIC3_SDHWCTRL_SUSPEND    (1 << 0)  /* 1=suspend all SD operations */
 #define ASIC3_SDHWCTRL_CLKSEL     (1 << 1)  /* 1=SDICK, 0=HCLK */
@@ -242,10 +249,10 @@ struct asic3_platform_data {
 /* SD card power supply ctrl 1=enable */
 #define ASIC3_SDHWCTRL_SDPWR      (1 << 6)
 
-#define ASIC3_EXTCF_Base		0x1100
+#define ASIC3_EXTCF_BASE        0x1100
 
-#define ASIC3_EXTCF_Select         0x00
-#define ASIC3_EXTCF_Reset          0x04
+#define ASIC3_EXTCF_SELECT        0x00
+#define ASIC3_EXTCF_RESET         0x04
 
 #define ASIC3_EXTCF_SMOD0	         (1 << 0)  /* slot number of mode 0 */
 #define ASIC3_EXTCF_SMOD1	         (1 << 1)  /* slot number of mode 1 */
@@ -279,222 +286,9 @@ struct asic3_platform_data {
  *  SDIO_CTRL         Control registers for SDIO operations
  *
  *****************************************************************************/
-#define ASIC3_SD_CONFIG_Base            0x0400 /* Assumes 32 bit addressing */
-
-#define ASIC3_SD_CONFIG_Command           0x08   /* R/W: Command */
-
-/* [0:8] SD Control Register Base Address */
-#define ASIC3_SD_CONFIG_Addr0             0x20
-
-/* [9:31] SD Control Register Base Address */
-#define ASIC3_SD_CONFIG_Addr1             0x24
-
-/* R/O: interrupt assigned to pin */
-#define ASIC3_SD_CONFIG_IntPin            0x78
-
-/*
- * Set to 0x1f to clock SD controller, 0 otherwise.
- * At 0x82 - Gated Clock Ctrl
- */
-#define ASIC3_SD_CONFIG_ClkStop           0x80
-
-/* Control clock of SD controller */
-#define ASIC3_SD_CONFIG_ClockMode         0x84
-#define ASIC3_SD_CONFIG_SDHC_PinStatus    0x88   /* R/0: SD pins status */
-#define ASIC3_SD_CONFIG_SDHC_Power1       0x90   /* Power1 - manual pwr ctrl */
-
-/* auto power up after card inserted */
-#define ASIC3_SD_CONFIG_SDHC_Power2       0x92
-
-/* auto power down when card removed */
-#define ASIC3_SD_CONFIG_SDHC_Power3       0x94
-#define ASIC3_SD_CONFIG_SDHC_CardDetect   0x98
-#define ASIC3_SD_CONFIG_SDHC_Slot         0xA0   /* R/O: support slot number */
-#define ASIC3_SD_CONFIG_SDHC_ExtGateClk1  0x1E0  /* Not used */
-#define ASIC3_SD_CONFIG_SDHC_ExtGateClk2  0x1E2  /* Not used*/
-
-/* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */
-#define ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable  0x1E8
-#define ASIC3_SD_CONFIG_SDHC_GPIO_Status  0x1EC  /* GPIO Status Reg. */
-
-/* Bit 1: double buffer/single buffer */
-#define ASIC3_SD_CONFIG_SDHC_ExtGateClk3  0x1F0
-
-/* Memory access enable (set to 1 to access SD Controller) */
-#define SD_CONFIG_COMMAND_MAE                (1<<1)
-
-#define SD_CONFIG_CLK_ENABLE_ALL             0x1f
-
-#define SD_CONFIG_POWER1_PC_33V              0x0200    /* Set for 3.3 volts */
-#define SD_CONFIG_POWER1_PC_OFF              0x0000    /* Turn off power */
-
- /* two bits - number of cycles for card detection */
-#define SD_CONFIG_CARDDETECTMODE_CLK           ((x) & 0x3)
-
-
-#define ASIC3_SD_CTRL_Base            0x1000
-
-#define ASIC3_SD_CTRL_Cmd                  0x00
-#define ASIC3_SD_CTRL_Arg0                 0x08
-#define ASIC3_SD_CTRL_Arg1                 0x0C
-#define ASIC3_SD_CTRL_StopInternal         0x10
-#define ASIC3_SD_CTRL_TransferSectorCount  0x14
-#define ASIC3_SD_CTRL_Response0            0x18
-#define ASIC3_SD_CTRL_Response1            0x1C
-#define ASIC3_SD_CTRL_Response2            0x20
-#define ASIC3_SD_CTRL_Response3            0x24
-#define ASIC3_SD_CTRL_Response4            0x28
-#define ASIC3_SD_CTRL_Response5            0x2C
-#define ASIC3_SD_CTRL_Response6            0x30
-#define ASIC3_SD_CTRL_Response7            0x34
-#define ASIC3_SD_CTRL_CardStatus           0x38
-#define ASIC3_SD_CTRL_BufferCtrl           0x3C
-#define ASIC3_SD_CTRL_IntMaskCard          0x40
-#define ASIC3_SD_CTRL_IntMaskBuffer        0x44
-#define ASIC3_SD_CTRL_CardClockCtrl        0x48
-#define ASIC3_SD_CTRL_MemCardXferDataLen   0x4C
-#define ASIC3_SD_CTRL_MemCardOptionSetup   0x50
-#define ASIC3_SD_CTRL_ErrorStatus0         0x58
-#define ASIC3_SD_CTRL_ErrorStatus1         0x5C
-#define ASIC3_SD_CTRL_DataPort             0x60
-#define ASIC3_SD_CTRL_TransactionCtrl      0x68
-#define ASIC3_SD_CTRL_SoftwareReset        0x1C0
-
-#define SD_CTRL_SOFTWARE_RESET_CLEAR            (1<<0)
-
-#define SD_CTRL_TRANSACTIONCONTROL_SET          (1<<8)
-
-#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD    (1<<15)
-#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK   (1<<8)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512    (1<<7)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256    (1<<6)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128    (1<<5)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64     (1<<4)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32     (1<<3)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16     (1<<2)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8      (1<<1)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4      (1<<0)
-#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2      (0<<0)
-
-#define MEM_CARD_OPTION_REQUIRED                   0x000e
-#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x)   (((x) & 0x0f) << 4)
-#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT      (1<<14)
-#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1           (1<<15)
-#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4           0
-
-#define SD_CTRL_COMMAND_INDEX(x)                   ((x) & 0x3f)
-#define SD_CTRL_COMMAND_TYPE_CMD                   (0 << 6)
-#define SD_CTRL_COMMAND_TYPE_ACMD                  (1 << 6)
-#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION        (2 << 6)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL       (0 << 8)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1       (4 << 8)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B      (5 << 8)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2       (6 << 8)
-#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3       (7 << 8)
-#define SD_CTRL_COMMAND_DATA_PRESENT               (1 << 11)
-#define SD_CTRL_COMMAND_TRANSFER_READ              (1 << 12)
-#define SD_CTRL_COMMAND_TRANSFER_WRITE             (0 << 12)
-#define SD_CTRL_COMMAND_MULTI_BLOCK                (1 << 13)
-#define SD_CTRL_COMMAND_SECURITY_CMD               (1 << 14)
-
-#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12         (1 << 0)
-#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12     (1 << 8)
-
-#define SD_CTRL_CARDSTATUS_RESPONSE_END            (1 << 0)
-#define SD_CTRL_CARDSTATUS_RW_END                  (1 << 2)
-#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0          (1 << 3)
-#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0         (1 << 4)
-#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0  (1 << 5)
-#define SD_CTRL_CARDSTATUS_WRITE_PROTECT           (1 << 7)
-#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3          (1 << 8)
-#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3         (1 << 9)
-#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3  (1 << 10)
-
-#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR       (1 << 0)
-#define SD_CTRL_BUFFERSTATUS_CRC_ERROR             (1 << 1)
-#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR    (1 << 2)
-#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT          (1 << 3)
-#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW       (1 << 4)
-#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW      (1 << 5)
-#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT           (1 << 6)
-#define SD_CTRL_BUFFERSTATUS_UNK7                  (1 << 7)
-#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE    (1 << 8)
-#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE   (1 << 9)
-#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION      (1 << 13)
-#define SD_CTRL_BUFFERSTATUS_CMD_BUSY              (1 << 14)
-#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS        (1 << 15)
-
-#define SD_CTRL_INTMASKCARD_RESPONSE_END           (1 << 0)
-#define SD_CTRL_INTMASKCARD_RW_END                 (1 << 2)
-#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0         (1 << 3)
-#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0        (1 << 4)
-#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5)
-#define SD_CTRL_INTMASKCARD_UNK6                   (1 << 6)
-#define SD_CTRL_INTMASKCARD_WRITE_PROTECT          (1 << 7)
-#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3         (1 << 8)
-#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3        (1 << 9)
-#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10)
-
-#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR      (1 << 0)
-#define SD_CTRL_INTMASKBUFFER_CRC_ERROR            (1 << 1)
-#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR   (1 << 2)
-#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT         (1 << 3)
-#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW      (1 << 4)
-#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW     (1 << 5)
-#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT          (1 << 6)
-#define SD_CTRL_INTMASKBUFFER_UNK7                 (1 << 7)
-#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE   (1 << 8)
-#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE  (1 << 9)
-#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION     (1 << 13)
-#define SD_CTRL_INTMASKBUFFER_CMD_BUSY             (1 << 14)
-#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS       (1 << 15)
-
-#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR                   (1 << 0)
-#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2)
-#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12     (1 << 3)
-#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA          (1 << 4)
-#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS   (1 << 5)
-#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12     (1 << 8)
-#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12         (1 << 9)
-#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA              (1 << 10)
-#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD              (1 << 11)
-
-#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE                      (1 << 0)
-#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA                    (1 << 4)
-#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS                   (1 << 5)
-#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY                     (1 << 6)
-
-#define ASIC3_SDIO_CTRL_Base          0x1200
-
-#define ASIC3_SDIO_CTRL_Cmd                  0x00
-#define ASIC3_SDIO_CTRL_CardPortSel          0x04
-#define ASIC3_SDIO_CTRL_Arg0                 0x08
-#define ASIC3_SDIO_CTRL_Arg1                 0x0C
-#define ASIC3_SDIO_CTRL_TransferBlockCount   0x14
-#define ASIC3_SDIO_CTRL_Response0            0x18
-#define ASIC3_SDIO_CTRL_Response1            0x1C
-#define ASIC3_SDIO_CTRL_Response2            0x20
-#define ASIC3_SDIO_CTRL_Response3            0x24
-#define ASIC3_SDIO_CTRL_Response4            0x28
-#define ASIC3_SDIO_CTRL_Response5            0x2C
-#define ASIC3_SDIO_CTRL_Response6            0x30
-#define ASIC3_SDIO_CTRL_Response7            0x34
-#define ASIC3_SDIO_CTRL_CardStatus           0x38
-#define ASIC3_SDIO_CTRL_BufferCtrl           0x3C
-#define ASIC3_SDIO_CTRL_IntMaskCard          0x40
-#define ASIC3_SDIO_CTRL_IntMaskBuffer        0x44
-#define ASIC3_SDIO_CTRL_CardXferDataLen      0x4C
-#define ASIC3_SDIO_CTRL_CardOptionSetup      0x50
-#define ASIC3_SDIO_CTRL_ErrorStatus0         0x54
-#define ASIC3_SDIO_CTRL_ErrorStatus1         0x58
-#define ASIC3_SDIO_CTRL_DataPort             0x60
-#define ASIC3_SDIO_CTRL_TransactionCtrl      0x68
-#define ASIC3_SDIO_CTRL_CardIntCtrl          0x6C
-#define ASIC3_SDIO_CTRL_ClocknWaitCtrl       0x70
-#define ASIC3_SDIO_CTRL_HostInformation      0x74
-#define ASIC3_SDIO_CTRL_ErrorCtrl            0x78
-#define ASIC3_SDIO_CTRL_LEDCtrl              0x7C
-#define ASIC3_SDIO_CTRL_SoftwareReset        0x1C0
+#define ASIC3_SD_CONFIG_BASE	0x0400 /* Assumes 32 bit addressing */
+#define ASIC3_SD_CTRL_BASE	0x1000
+#define ASIC3_SDIO_CTRL_BASE	0x1200
 
 #define ASIC3_MAP_SIZE_32BIT	0x2000
 #define ASIC3_MAP_SIZE_16BIT	0x1000
diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h
new file mode 100644
index 000000000000..c12c3c0932bf
--- /dev/null
+++ b/include/linux/mfd/ezx-pcap.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ * For further information, please see http://wiki.openezx.org/PCAP2
+ */
+
+#ifndef EZX_PCAP_H
+#define EZX_PCAP_H
+
+struct pcap_subdev {
+	int id;
+	const char *name;
+	void *platform_data;
+};
+
+struct pcap_platform_data {
+	unsigned int irq_base;
+	unsigned int config;
+	void (*init) (void *);	/* board specific init */
+	int num_subdevs;
+	struct pcap_subdev *subdevs;
+};
+
+struct pcap_chip;
+
+int ezx_pcap_write(struct pcap_chip *, u8, u32);
+int ezx_pcap_read(struct pcap_chip *, u8, u32 *);
+int pcap_to_irq(struct pcap_chip *, int);
+int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *);
+int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
+
+#define PCAP_SECOND_PORT	1
+#define PCAP_CS_AH		2
+
+#define PCAP_REGISTER_WRITE_OP_BIT	0x80000000
+#define PCAP_REGISTER_READ_OP_BIT	0x00000000
+
+#define PCAP_REGISTER_VALUE_MASK	0x01ffffff
+#define PCAP_REGISTER_ADDRESS_MASK	0x7c000000
+#define PCAP_REGISTER_ADDRESS_SHIFT	26
+#define PCAP_REGISTER_NUMBER		32
+#define PCAP_CLEAR_INTERRUPT_REGISTER	0x01ffffff
+#define PCAP_MASK_ALL_INTERRUPT		0x01ffffff
+
+/* registers acessible by both pcap ports */
+#define PCAP_REG_ISR		0x0	/* Interrupt Status */
+#define PCAP_REG_MSR		0x1	/* Interrupt Mask */
+#define PCAP_REG_PSTAT		0x2	/* Processor Status */
+#define PCAP_REG_VREG2		0x6	/* Regulator Bank 2 Control */
+#define PCAP_REG_AUXVREG	0x7	/* Auxiliary Regulator Control */
+#define PCAP_REG_BATT		0x8	/* Battery Control */
+#define PCAP_REG_ADC		0x9	/* AD Control */
+#define PCAP_REG_ADR		0xa	/* AD Result */
+#define PCAP_REG_CODEC		0xb	/* Audio Codec Control */
+#define PCAP_REG_RX_AMPS	0xc	/* RX Audio Amplifiers Control */
+#define PCAP_REG_ST_DAC		0xd	/* Stereo DAC Control */
+#define PCAP_REG_BUSCTRL	0x14	/* Connectivity Control */
+#define PCAP_REG_PERIPH		0x15	/* Peripheral Control */
+#define PCAP_REG_LOWPWR		0x18	/* Regulator Low Power Control */
+#define PCAP_REG_TX_AMPS	0x1a	/* TX Audio Amplifiers Control */
+#define PCAP_REG_GP		0x1b	/* General Purpose */
+#define PCAP_REG_TEST1		0x1c
+#define PCAP_REG_TEST2		0x1d
+#define PCAP_REG_VENDOR_TEST1	0x1e
+#define PCAP_REG_VENDOR_TEST2	0x1f
+
+/* registers acessible by pcap port 1 only (a1200, e2 & e6) */
+#define PCAP_REG_INT_SEL	0x3	/* Interrupt Select */
+#define PCAP_REG_SWCTRL		0x4	/* Switching Regulator Control */
+#define PCAP_REG_VREG1		0x5	/* Regulator Bank 1 Control */
+#define PCAP_REG_RTC_TOD	0xe	/* RTC Time of Day */
+#define PCAP_REG_RTC_TODA	0xf	/* RTC Time of Day Alarm */
+#define PCAP_REG_RTC_DAY	0x10	/* RTC Day */
+#define PCAP_REG_RTC_DAYA	0x11	/* RTC Day Alarm */
+#define PCAP_REG_MTRTMR		0x12	/* AD Monitor Timer */
+#define PCAP_REG_PWR		0x13	/* Power Control */
+#define PCAP_REG_AUXVREG_MASK	0x16	/* Auxiliary Regulator Mask */
+#define PCAP_REG_VENDOR_REV	0x17
+#define PCAP_REG_PERIPH_MASK	0x19	/* Peripheral Mask */
+
+/* PCAP2 Interrupts */
+#define PCAP_NIRQS		23
+#define PCAP_IRQ_ADCDONE	0	/* ADC done port 1 */
+#define PCAP_IRQ_TS		1	/* Touch Screen */
+#define PCAP_IRQ_1HZ		2	/* 1HZ timer */
+#define PCAP_IRQ_WH		3	/* ADC above high limit */
+#define PCAP_IRQ_WL		4	/* ADC below low limit */
+#define PCAP_IRQ_TODA		5	/* Time of day alarm */
+#define PCAP_IRQ_USB4V		6	/* USB above 4V */
+#define PCAP_IRQ_ONOFF		7	/* On/Off button */
+#define PCAP_IRQ_ONOFF2		8	/* On/Off button 2 */
+#define PCAP_IRQ_USB1V		9	/* USB above 1V */
+#define PCAP_IRQ_MOBPORT	10
+#define PCAP_IRQ_MIC		11	/* Mic attach/HS button */
+#define PCAP_IRQ_HS		12	/* Headset attach */
+#define PCAP_IRQ_ST		13
+#define PCAP_IRQ_PC		14	/* Power Cut */
+#define PCAP_IRQ_WARM		15
+#define PCAP_IRQ_EOL		16	/* Battery End Of Life */
+#define PCAP_IRQ_CLK		17
+#define PCAP_IRQ_SYSRST		18	/* System Reset */
+#define PCAP_IRQ_DUMMY		19
+#define PCAP_IRQ_ADCDONE2	20	/* ADC done port 2 */
+#define PCAP_IRQ_SOFTRESET	21
+#define PCAP_IRQ_MNEXB		22
+
+/* voltage regulators */
+#define V1		0
+#define V2		1
+#define V3		2
+#define V4		3
+#define V5		4
+#define V6		5
+#define V7		6
+#define V8		7
+#define V9		8
+#define V10		9
+#define VAUX1		10
+#define VAUX2		11
+#define VAUX3		12
+#define VAUX4		13
+#define VSIM		14
+#define VSIM2		15
+#define VVIB		16
+#define SW1		17
+#define SW2		18
+#define SW3		19
+#define SW1S		20
+#define SW2S		21
+
+#define PCAP_BATT_DAC_MASK		0x000000ff
+#define PCAP_BATT_DAC_SHIFT		0
+#define PCAP_BATT_B_FDBK		(1 << 8)
+#define PCAP_BATT_EXT_ISENSE		(1 << 9)
+#define PCAP_BATT_V_COIN_MASK		0x00003c00
+#define PCAP_BATT_V_COIN_SHIFT		10
+#define PCAP_BATT_I_COIN		(1 << 14)
+#define PCAP_BATT_COIN_CH_EN		(1 << 15)
+#define PCAP_BATT_EOL_SEL_MASK		0x000e0000
+#define PCAP_BATT_EOL_SEL_SHIFT		17
+#define PCAP_BATT_EOL_CMP_EN		(1 << 20)
+#define PCAP_BATT_BATT_DET_EN		(1 << 21)
+#define PCAP_BATT_THERMBIAS_CTRL	(1 << 22)
+
+#define PCAP_ADC_ADEN			(1 << 0)
+#define PCAP_ADC_RAND			(1 << 1)
+#define PCAP_ADC_AD_SEL1		(1 << 2)
+#define PCAP_ADC_AD_SEL2		(1 << 3)
+#define PCAP_ADC_ADA1_MASK		0x00000070
+#define PCAP_ADC_ADA1_SHIFT		4
+#define PCAP_ADC_ADA2_MASK		0x00000380
+#define PCAP_ADC_ADA2_SHIFT		7
+#define PCAP_ADC_ATO_MASK		0x00003c00
+#define PCAP_ADC_ATO_SHIFT		10
+#define PCAP_ADC_ATOX			(1 << 14)
+#define PCAP_ADC_MTR1			(1 << 15)
+#define PCAP_ADC_MTR2			(1 << 16)
+#define PCAP_ADC_TS_M_MASK		0x000e0000
+#define PCAP_ADC_TS_M_SHIFT		17
+#define PCAP_ADC_TS_REF_LOWPWR		(1 << 20)
+#define PCAP_ADC_TS_REFENB		(1 << 21)
+#define PCAP_ADC_BATT_I_POLARITY	(1 << 22)
+#define PCAP_ADC_BATT_I_ADC		(1 << 23)
+
+#define PCAP_ADC_BANK_0			0
+#define PCAP_ADC_BANK_1			1
+/* ADC bank 0 */
+#define PCAP_ADC_CH_COIN		0
+#define PCAP_ADC_CH_BATT		1
+#define PCAP_ADC_CH_BPLUS		2
+#define PCAP_ADC_CH_MOBPORTB		3
+#define PCAP_ADC_CH_TEMPERATURE		4
+#define PCAP_ADC_CH_CHARGER_ID		5
+#define PCAP_ADC_CH_AD6			6
+/* ADC bank 1 */
+#define PCAP_ADC_CH_AD7			0
+#define PCAP_ADC_CH_AD8			1
+#define PCAP_ADC_CH_AD9			2
+#define PCAP_ADC_CH_TS_X1		3
+#define PCAP_ADC_CH_TS_X2		4
+#define PCAP_ADC_CH_TS_Y1		5
+#define PCAP_ADC_CH_TS_Y2		6
+
+#define PCAP_ADC_T_NOW			0
+#define PCAP_ADC_T_IN_BURST		1
+#define PCAP_ADC_T_OUT_BURST		2
+
+#define PCAP_ADC_ATO_IN_BURST		6
+#define PCAP_ADC_ATO_OUT_BURST		0
+
+#define PCAP_ADC_TS_M_XY		1
+#define PCAP_ADC_TS_M_PRESSURE		2
+#define PCAP_ADC_TS_M_PLATE_X		3
+#define PCAP_ADC_TS_M_PLATE_Y		4
+#define PCAP_ADC_TS_M_STANDBY		5
+#define PCAP_ADC_TS_M_NONTS		6
+
+#define PCAP_ADR_ADD1_MASK		0x000003ff
+#define PCAP_ADR_ADD1_SHIFT		0
+#define PCAP_ADR_ADD2_MASK		0x000ffc00
+#define PCAP_ADR_ADD2_SHIFT		10
+#define PCAP_ADR_ADINC1			(1 << 20)
+#define PCAP_ADR_ADINC2			(1 << 21)
+#define PCAP_ADR_ASC			(1 << 22)
+#define PCAP_ADR_ONESHOT		(1 << 23)
+
+#define PCAP_BUSCTRL_FSENB		(1 << 0)
+#define PCAP_BUSCTRL_USB_SUSPEND	(1 << 1)
+#define PCAP_BUSCTRL_USB_PU		(1 << 2)
+#define PCAP_BUSCTRL_USB_PD		(1 << 3)
+#define PCAP_BUSCTRL_VUSB_EN		(1 << 4)
+#define PCAP_BUSCTRL_USB_PS		(1 << 5)
+#define PCAP_BUSCTRL_VUSB_MSTR_EN	(1 << 6)
+#define PCAP_BUSCTRL_VBUS_PD_ENB	(1 << 7)
+#define PCAP_BUSCTRL_CURRLIM		(1 << 8)
+#define PCAP_BUSCTRL_RS232ENB		(1 << 9)
+#define PCAP_BUSCTRL_RS232_DIR		(1 << 10)
+#define PCAP_BUSCTRL_SE0_CONN		(1 << 11)
+#define PCAP_BUSCTRL_USB_PDM		(1 << 12)
+#define PCAP_BUSCTRL_BUS_PRI_ADJ	(1 << 24)
+
+/* leds */
+#define PCAP_LED0		0
+#define PCAP_LED1		1
+#define PCAP_BL0		2
+#define PCAP_BL1		3
+#define PCAP_VIB		4
+#define PCAP_LED_3MA		0
+#define PCAP_LED_4MA		1
+#define PCAP_LED_5MA		2
+#define PCAP_LED_9MA		3
+#define PCAP_LED_GPIO_VAL_MASK	0x00ffffff
+#define PCAP_LED_GPIO_EN	0x01000000
+#define PCAP_LED_GPIO_INVERT	0x02000000
+#define PCAP_LED_T_MASK		0xf
+#define PCAP_LED_C_MASK		0x3
+#define PCAP_BL_MASK		0x1f
+#define PCAP_BL0_SHIFT		0
+#define PCAP_LED0_EN		(1 << 5)
+#define PCAP_LED1_EN		(1 << 6)
+#define PCAP_LED0_T_SHIFT	7
+#define PCAP_LED1_T_SHIFT	11
+#define PCAP_LED0_C_SHIFT	15
+#define PCAP_LED1_C_SHIFT	17
+#define PCAP_BL1_SHIFT		20
+#define PCAP_VIB_MASK		0x3
+#define PCAP_VIB_SHIFT		20
+#define PCAP_VIB_EN		(1 << 19)
+
+/* RTC */
+#define PCAP_RTC_DAY_MASK	0x3fff
+#define PCAP_RTC_TOD_MASK	0xffff
+#define PCAP_RTC_PC_MASK	0x7
+#define SEC_PER_DAY		86400
+
+#endif
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index c377118884e6..6b9c5d06690c 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -22,7 +22,7 @@
  * data for the MMC controller
  */
 struct tmio_mmc_data {
-	unsigned int		hclk;
+	const unsigned int		hclk;
 };
 
 /*