summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorMark Brown <broonie@opensource.wolfsonmicro.com>2012-10-30 18:39:02 +0000
committerMark Brown <broonie@opensource.wolfsonmicro.com>2012-10-30 18:39:02 +0000
commit31271e9aacaa3c3460cbad8ec62fb5a04a522f5b (patch)
tree815c671dac14e0e07959dc88e94c36a994f9c460 /include
parent32111abb508424d1d110fa471d940160abe251f5 (diff)
parentdc4dc36056392c0b0b1ca9e81bebff964b9297e0 (diff)
downloadlinux-31271e9aacaa3c3460cbad8ec62fb5a04a522f5b.tar.bz2
Merge branch 'spi-tegra' into spi-next
Diffstat (limited to 'include')
-rw-r--r--include/Kbuild4
-rw-r--r--include/asm-generic/Kbuild0
-rw-r--r--include/drm/Kbuild0
-rw-r--r--include/drm/drm_pciids.h3
-rw-r--r--include/linux/Kbuild26
-rw-r--r--include/linux/byteorder/Kbuild0
-rw-r--r--include/linux/caif/Kbuild0
-rw-r--r--include/linux/can/Kbuild0
-rw-r--r--include/linux/coredump.h1
-rw-r--r--include/linux/dvb/Kbuild8
-rw-r--r--include/linux/dvb/dmx.h130
-rw-r--r--include/linux/dvb/video.h249
-rw-r--r--include/linux/dynamic_debug.h2
-rw-r--r--include/linux/elf-fdpic.h51
-rw-r--r--include/linux/extcon.h2
-rw-r--r--include/linux/fs.h126
-rw-r--r--include/linux/hsi/Kbuild1
-rw-r--r--include/linux/iio/iio.h16
-rw-r--r--include/linux/isdn/Kbuild0
-rw-r--r--include/linux/memblock.h1
-rw-r--r--include/linux/mfd/max77693.h13
-rw-r--r--include/linux/mmc/Kbuild0
-rw-r--r--include/linux/netfilter/Kbuild1
-rw-r--r--include/linux/netfilter/ipset/Kbuild0
-rw-r--r--include/linux/netfilter_arp/Kbuild0
-rw-r--r--include/linux/netfilter_bridge/Kbuild0
-rw-r--r--include/linux/netfilter_ipv4/Kbuild0
-rw-r--r--include/linux/netfilter_ipv6/Kbuild0
-rw-r--r--include/linux/nfsd/Kbuild0
-rw-r--r--include/linux/of.h7
-rw-r--r--include/linux/of_address.h4
-rw-r--r--include/linux/of_irq.h4
-rw-r--r--include/linux/percpu-rwsem.h28
-rw-r--r--include/linux/perf_event.h10
-rw-r--r--include/linux/pid_namespace.h8
-rw-r--r--include/linux/ratelimit.h27
-rw-r--r--include/linux/rbtree_augmented.h1
-rw-r--r--include/linux/spi/Kbuild0
-rw-r--r--include/linux/spi/spi-tegra.h40
-rw-r--r--include/linux/sunrpc/Kbuild0
-rw-r--r--include/linux/tc_act/Kbuild0
-rw-r--r--include/linux/tc_ematch/Kbuild0
-rw-r--r--include/linux/tcp.h3
-rw-r--r--include/linux/uprobes.h11
-rw-r--r--include/linux/usb.h11
-rw-r--r--include/linux/usb/Kbuild10
-rw-r--r--include/linux/usb/audio.h524
-rw-r--r--include/linux/usb/ch9.h960
-rw-r--r--include/linux/usb/functionfs.h167
-rw-r--r--include/linux/wimax/Kbuild0
-rw-r--r--include/mtd/Kbuild0
-rw-r--r--include/net/cfg80211.h1
-rw-r--r--include/uapi/asm-generic/kvm_para.h4
-rw-r--r--include/uapi/linux/dvb/Kbuild8
-rw-r--r--include/uapi/linux/dvb/audio.h (renamed from include/linux/dvb/audio.h)0
-rw-r--r--include/uapi/linux/dvb/ca.h (renamed from include/linux/dvb/ca.h)0
-rw-r--r--include/uapi/linux/dvb/dmx.h155
-rw-r--r--include/uapi/linux/dvb/frontend.h (renamed from include/linux/dvb/frontend.h)0
-rw-r--r--include/uapi/linux/dvb/net.h (renamed from include/linux/dvb/net.h)0
-rw-r--r--include/uapi/linux/dvb/osd.h (renamed from include/linux/dvb/osd.h)0
-rw-r--r--include/uapi/linux/dvb/version.h (renamed from include/linux/dvb/version.h)0
-rw-r--r--include/uapi/linux/dvb/video.h274
-rw-r--r--include/uapi/linux/elf-fdpic.h42
-rw-r--r--include/uapi/linux/fs.h132
-rw-r--r--include/uapi/linux/hsi/Kbuild1
-rw-r--r--include/uapi/linux/hsi/hsi_char.h (renamed from include/linux/hsi/hsi_char.h)0
-rw-r--r--include/uapi/linux/irqnr.h4
-rw-r--r--include/uapi/linux/tcp.h1
-rw-r--r--include/uapi/linux/usb/Kbuild10
-rw-r--r--include/uapi/linux/usb/audio.h545
-rw-r--r--include/uapi/linux/usb/cdc.h (renamed from include/linux/usb/cdc.h)0
-rw-r--r--include/uapi/linux/usb/ch11.h (renamed from include/linux/usb/ch11.h)0
-rw-r--r--include/uapi/linux/usb/ch9.h993
-rw-r--r--include/uapi/linux/usb/functionfs.h169
-rw-r--r--include/uapi/linux/usb/g_printer.h (renamed from include/linux/usb/g_printer.h)0
-rw-r--r--include/uapi/linux/usb/gadgetfs.h (renamed from include/linux/usb/gadgetfs.h)0
-rw-r--r--include/uapi/linux/usb/midi.h (renamed from include/linux/usb/midi.h)0
-rw-r--r--include/uapi/linux/usb/tmc.h (renamed from include/linux/usb/tmc.h)0
-rw-r--r--include/uapi/linux/usb/video.h (renamed from include/linux/usb/video.h)0
-rw-r--r--include/xen/Kbuild0
-rw-r--r--include/xen/grant_table.h2
-rw-r--r--include/xen/interface/grant_table.h2
-rw-r--r--include/xen/interface/memory.h24
83 files changed, 2472 insertions, 2344 deletions
diff --git a/include/Kbuild b/include/Kbuild
index 8d226bfa2696..83256b64166a 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -1,12 +1,8 @@
# Top-level Makefile calls into asm-$(ARCH)
# List only non-arch directories below
-header-y += asm-generic/
header-y += linux/
header-y += sound/
-header-y += mtd/
header-y += rdma/
header-y += video/
-header-y += drm/
-header-y += xen/
header-y += scsi/
diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/asm-generic/Kbuild
+++ /dev/null
diff --git a/include/drm/Kbuild b/include/drm/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/drm/Kbuild
+++ /dev/null
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index c78bb997e2c6..af1cbaf535ed 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -205,6 +205,8 @@
{0x1002, 0x6788, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x678A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6790, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6791, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6792, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
@@ -217,6 +219,7 @@
{0x1002, 0x6808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6810, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6811, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6816, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6817, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6818, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 5b57367e28db..7fe2dae251e5 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -1,31 +1,5 @@
-header-y += byteorder/
-header-y += can/
-header-y += caif/
header-y += dvb/
header-y += hdlc/
header-y += hsi/
-header-y += isdn/
-header-y += mmc/
-header-y += nfsd/
header-y += raid/
-header-y += spi/
-header-y += sunrpc/
-header-y += tc_act/
-header-y += tc_ematch/
-header-y += netfilter/
-header-y += netfilter_arp/
-header-y += netfilter_bridge/
-header-y += netfilter_ipv4/
-header-y += netfilter_ipv6/
header-y += usb/
-header-y += wimax/
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
- $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),)
-endif
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
- $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),)
-endif
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
- $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),)
-endif
diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/byteorder/Kbuild
+++ /dev/null
diff --git a/include/linux/caif/Kbuild b/include/linux/caif/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/caif/Kbuild
+++ /dev/null
diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/can/Kbuild
+++ /dev/null
diff --git a/include/linux/coredump.h b/include/linux/coredump.h
index 1775eb8acc03..1d7399314a89 100644
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -4,6 +4,7 @@
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/fs.h>
+#include <asm/siginfo.h>
/*
* These are the only things you should do on a core-file: use only these
diff --git a/include/linux/dvb/Kbuild b/include/linux/dvb/Kbuild
index f4dba8637f98..e69de29bb2d1 100644
--- a/include/linux/dvb/Kbuild
+++ b/include/linux/dvb/Kbuild
@@ -1,8 +0,0 @@
-header-y += audio.h
-header-y += ca.h
-header-y += dmx.h
-header-y += frontend.h
-header-y += net.h
-header-y += osd.h
-header-y += version.h
-header-y += video.h
diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h
index f078f3ac82d4..0be6d8f2b52b 100644
--- a/include/linux/dvb/dmx.h
+++ b/include/linux/dvb/dmx.h
@@ -20,138 +20,10 @@
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
-
#ifndef _DVBDMX_H_
#define _DVBDMX_H_
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/time.h>
-#else
-#include <time.h>
-#endif
-
-
-#define DMX_FILTER_SIZE 16
-
-typedef enum
-{
- DMX_OUT_DECODER, /* Streaming directly to decoder. */
- DMX_OUT_TAP, /* Output going to a memory buffer */
- /* (to be retrieved via the read command).*/
- DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */
- /* (to be retrieved by reading from the */
- /* logical DVR device). */
- DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */
-} dmx_output_t;
-
-
-typedef enum
-{
- DMX_IN_FRONTEND, /* Input from a front-end device. */
- DMX_IN_DVR /* Input from the logical DVR device. */
-} dmx_input_t;
-
-
-typedef enum
-{
- DMX_PES_AUDIO0,
- DMX_PES_VIDEO0,
- DMX_PES_TELETEXT0,
- DMX_PES_SUBTITLE0,
- DMX_PES_PCR0,
-
- DMX_PES_AUDIO1,
- DMX_PES_VIDEO1,
- DMX_PES_TELETEXT1,
- DMX_PES_SUBTITLE1,
- DMX_PES_PCR1,
-
- DMX_PES_AUDIO2,
- DMX_PES_VIDEO2,
- DMX_PES_TELETEXT2,
- DMX_PES_SUBTITLE2,
- DMX_PES_PCR2,
-
- DMX_PES_AUDIO3,
- DMX_PES_VIDEO3,
- DMX_PES_TELETEXT3,
- DMX_PES_SUBTITLE3,
- DMX_PES_PCR3,
-
- DMX_PES_OTHER
-} dmx_pes_type_t;
-
-#define DMX_PES_AUDIO DMX_PES_AUDIO0
-#define DMX_PES_VIDEO DMX_PES_VIDEO0
-#define DMX_PES_TELETEXT DMX_PES_TELETEXT0
-#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0
-#define DMX_PES_PCR DMX_PES_PCR0
-
-
-typedef struct dmx_filter
-{
- __u8 filter[DMX_FILTER_SIZE];
- __u8 mask[DMX_FILTER_SIZE];
- __u8 mode[DMX_FILTER_SIZE];
-} dmx_filter_t;
-
-
-struct dmx_sct_filter_params
-{
- __u16 pid;
- dmx_filter_t filter;
- __u32 timeout;
- __u32 flags;
-#define DMX_CHECK_CRC 1
-#define DMX_ONESHOT 2
-#define DMX_IMMEDIATE_START 4
-#define DMX_KERNEL_CLIENT 0x8000
-};
-
-
-struct dmx_pes_filter_params
-{
- __u16 pid;
- dmx_input_t input;
- dmx_output_t output;
- dmx_pes_type_t pes_type;
- __u32 flags;
-};
-
-typedef struct dmx_caps {
- __u32 caps;
- int num_decoders;
-} dmx_caps_t;
-
-typedef enum {
- DMX_SOURCE_FRONT0 = 0,
- DMX_SOURCE_FRONT1,
- DMX_SOURCE_FRONT2,
- DMX_SOURCE_FRONT3,
- DMX_SOURCE_DVR0 = 16,
- DMX_SOURCE_DVR1,
- DMX_SOURCE_DVR2,
- DMX_SOURCE_DVR3
-} dmx_source_t;
-
-struct dmx_stc {
- unsigned int num; /* input : which STC? 0..N */
- unsigned int base; /* output: divisor for stc to get 90 kHz clock */
- __u64 stc; /* output: stc in 'base'*90 kHz units */
-};
-
-
-#define DMX_START _IO('o', 41)
-#define DMX_STOP _IO('o', 42)
-#define DMX_SET_FILTER _IOW('o', 43, struct dmx_sct_filter_params)
-#define DMX_SET_PES_FILTER _IOW('o', 44, struct dmx_pes_filter_params)
-#define DMX_SET_BUFFER_SIZE _IO('o', 45)
-#define DMX_GET_PES_PIDS _IOR('o', 47, __u16[5])
-#define DMX_GET_CAPS _IOR('o', 48, dmx_caps_t)
-#define DMX_SET_SOURCE _IOW('o', 49, dmx_source_t)
-#define DMX_GET_STC _IOWR('o', 50, struct dmx_stc)
-#define DMX_ADD_PID _IOW('o', 51, __u16)
-#define DMX_REMOVE_PID _IOW('o', 52, __u16)
+#include <uapi/linux/dvb/dmx.h>
#endif /*_DVBDMX_H_*/
diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h
index 1d750c0fd86e..85c20d925696 100644
--- a/include/linux/dvb/video.h
+++ b/include/linux/dvb/video.h
@@ -20,257 +20,10 @@
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
-
#ifndef _DVBVIDEO_H_
#define _DVBVIDEO_H_
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/compiler.h>
-#else
-#include <stdint.h>
-#include <time.h>
-#endif
-
-typedef enum {
- VIDEO_FORMAT_4_3, /* Select 4:3 format */
- VIDEO_FORMAT_16_9, /* Select 16:9 format. */
- VIDEO_FORMAT_221_1 /* 2.21:1 */
-} video_format_t;
-
-
-typedef enum {
- VIDEO_SYSTEM_PAL,
- VIDEO_SYSTEM_NTSC,
- VIDEO_SYSTEM_PALN,
- VIDEO_SYSTEM_PALNc,
- VIDEO_SYSTEM_PALM,
- VIDEO_SYSTEM_NTSC60,
- VIDEO_SYSTEM_PAL60,
- VIDEO_SYSTEM_PALM60
-} video_system_t;
-
-
-typedef enum {
- VIDEO_PAN_SCAN, /* use pan and scan format */
- VIDEO_LETTER_BOX, /* use letterbox format */
- VIDEO_CENTER_CUT_OUT /* use center cut out format */
-} video_displayformat_t;
-
-typedef struct {
- int w;
- int h;
- video_format_t aspect_ratio;
-} video_size_t;
-
-typedef enum {
- VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
- VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
- comes from the user through the write
- system call */
-} video_stream_source_t;
-
-
-typedef enum {
- VIDEO_STOPPED, /* Video is stopped */
- VIDEO_PLAYING, /* Video is currently playing */
- VIDEO_FREEZED /* Video is freezed */
-} video_play_state_t;
-
-
-/* Decoder commands */
-#define VIDEO_CMD_PLAY (0)
-#define VIDEO_CMD_STOP (1)
-#define VIDEO_CMD_FREEZE (2)
-#define VIDEO_CMD_CONTINUE (3)
-
-/* Flags for VIDEO_CMD_FREEZE */
-#define VIDEO_CMD_FREEZE_TO_BLACK (1 << 0)
-
-/* Flags for VIDEO_CMD_STOP */
-#define VIDEO_CMD_STOP_TO_BLACK (1 << 0)
-#define VIDEO_CMD_STOP_IMMEDIATELY (1 << 1)
-
-/* Play input formats: */
-/* The decoder has no special format requirements */
-#define VIDEO_PLAY_FMT_NONE (0)
-/* The decoder requires full GOPs */
-#define VIDEO_PLAY_FMT_GOP (1)
-
-/* The structure must be zeroed before use by the application
- This ensures it can be extended safely in the future. */
-struct video_command {
- __u32 cmd;
- __u32 flags;
- union {
- struct {
- __u64 pts;
- } stop;
-
- struct {
- /* 0 or 1000 specifies normal speed,
- 1 specifies forward single stepping,
- -1 specifies backward single stepping,
- >1: playback at speed/1000 of the normal speed,
- <-1: reverse playback at (-speed/1000) of the normal speed. */
- __s32 speed;
- __u32 format;
- } play;
-
- struct {
- __u32 data[16];
- } raw;
- };
-};
-
-/* FIELD_UNKNOWN can be used if the hardware does not know whether
- the Vsync is for an odd, even or progressive (i.e. non-interlaced)
- field. */
-#define VIDEO_VSYNC_FIELD_UNKNOWN (0)
-#define VIDEO_VSYNC_FIELD_ODD (1)
-#define VIDEO_VSYNC_FIELD_EVEN (2)
-#define VIDEO_VSYNC_FIELD_PROGRESSIVE (3)
-
-struct video_event {
- __s32 type;
-#define VIDEO_EVENT_SIZE_CHANGED 1
-#define VIDEO_EVENT_FRAME_RATE_CHANGED 2
-#define VIDEO_EVENT_DECODER_STOPPED 3
-#define VIDEO_EVENT_VSYNC 4
- __kernel_time_t timestamp;
- union {
- video_size_t size;
- unsigned int frame_rate; /* in frames per 1000sec */
- unsigned char vsync_field; /* unknown/odd/even/progressive */
- } u;
-};
-
-
-struct video_status {
- int video_blank; /* blank video on freeze? */
- video_play_state_t play_state; /* current state of playback */
- video_stream_source_t stream_source; /* current source (demux/memory) */
- video_format_t video_format; /* current aspect ratio of stream*/
- video_displayformat_t display_format;/* selected cropping mode */
-};
-
-
-struct video_still_picture {
- char __user *iFrame; /* pointer to a single iframe in memory */
- __s32 size;
-};
-
-
-typedef
-struct video_highlight {
- int active; /* 1=show highlight, 0=hide highlight */
- __u8 contrast1; /* 7- 4 Pattern pixel contrast */
- /* 3- 0 Background pixel contrast */
- __u8 contrast2; /* 7- 4 Emphasis pixel-2 contrast */
- /* 3- 0 Emphasis pixel-1 contrast */
- __u8 color1; /* 7- 4 Pattern pixel color */
- /* 3- 0 Background pixel color */
- __u8 color2; /* 7- 4 Emphasis pixel-2 color */
- /* 3- 0 Emphasis pixel-1 color */
- __u32 ypos; /* 23-22 auto action mode */
- /* 21-12 start y */
- /* 9- 0 end y */
- __u32 xpos; /* 23-22 button color number */
- /* 21-12 start x */
- /* 9- 0 end x */
-} video_highlight_t;
-
-
-typedef struct video_spu {
- int active;
- int stream_id;
-} video_spu_t;
-
-
-typedef struct video_spu_palette { /* SPU Palette information */
- int length;
- __u8 __user *palette;
-} video_spu_palette_t;
-
-
-typedef struct video_navi_pack {
- int length; /* 0 ... 1024 */
- __u8 data[1024];
-} video_navi_pack_t;
-
-
-typedef __u16 video_attributes_t;
-/* bits: descr. */
-/* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */
-/* 13-12 TV system (0=525/60, 1=625/50) */
-/* 11-10 Aspect ratio (0=4:3, 3=16:9) */
-/* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */
-/* 7 line 21-1 data present in GOP (1=yes, 0=no) */
-/* 6 line 21-2 data present in GOP (1=yes, 0=no) */
-/* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */
-/* 2 source letterboxed (1=yes, 0=no) */
-/* 0 film/camera mode (0=camera, 1=film (625/50 only)) */
-
-
-/* bit definitions for capabilities: */
-/* can the hardware decode MPEG1 and/or MPEG2? */
-#define VIDEO_CAP_MPEG1 1
-#define VIDEO_CAP_MPEG2 2
-/* can you send a system and/or program stream to video device?
- (you still have to open the video and the audio device but only
- send the stream to the video device) */
-#define VIDEO_CAP_SYS 4
-#define VIDEO_CAP_PROG 8
-/* can the driver also handle SPU, NAVI and CSS encoded data?
- (CSS API is not present yet) */
-#define VIDEO_CAP_SPU 16
-#define VIDEO_CAP_NAVI 32
-#define VIDEO_CAP_CSS 64
-
-
-#define VIDEO_STOP _IO('o', 21)
-#define VIDEO_PLAY _IO('o', 22)
-#define VIDEO_FREEZE _IO('o', 23)
-#define VIDEO_CONTINUE _IO('o', 24)
-#define VIDEO_SELECT_SOURCE _IO('o', 25)
-#define VIDEO_SET_BLANK _IO('o', 26)
-#define VIDEO_GET_STATUS _IOR('o', 27, struct video_status)
-#define VIDEO_GET_EVENT _IOR('o', 28, struct video_event)
-#define VIDEO_SET_DISPLAY_FORMAT _IO('o', 29)
-#define VIDEO_STILLPICTURE _IOW('o', 30, struct video_still_picture)
-#define VIDEO_FAST_FORWARD _IO('o', 31)
-#define VIDEO_SLOWMOTION _IO('o', 32)
-#define VIDEO_GET_CAPABILITIES _IOR('o', 33, unsigned int)
-#define VIDEO_CLEAR_BUFFER _IO('o', 34)
-#define VIDEO_SET_ID _IO('o', 35)
-#define VIDEO_SET_STREAMTYPE _IO('o', 36)
-#define VIDEO_SET_FORMAT _IO('o', 37)
-#define VIDEO_SET_SYSTEM _IO('o', 38)
-#define VIDEO_SET_HIGHLIGHT _IOW('o', 39, video_highlight_t)
-#define VIDEO_SET_SPU _IOW('o', 50, video_spu_t)
-#define VIDEO_SET_SPU_PALETTE _IOW('o', 51, video_spu_palette_t)
-#define VIDEO_GET_NAVI _IOR('o', 52, video_navi_pack_t)
-#define VIDEO_SET_ATTRIBUTES _IO('o', 53)
-#define VIDEO_GET_SIZE _IOR('o', 55, video_size_t)
-#define VIDEO_GET_FRAME_RATE _IOR('o', 56, unsigned int)
-
-/**
- * VIDEO_GET_PTS
- *
- * Read the 33 bit presentation time stamp as defined
- * in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
- *
- * The PTS should belong to the currently played
- * frame if possible, but may also be a value close to it
- * like the PTS of the last decoded frame or the last PTS
- * extracted by the PES parser.
- */
-#define VIDEO_GET_PTS _IOR('o', 57, __u64)
-
-/* Read the number of displayed frames since the decoder was started */
-#define VIDEO_GET_FRAME_COUNT _IOR('o', 58, __u64)
-
-#define VIDEO_COMMAND _IOWR('o', 59, struct video_command)
-#define VIDEO_TRY_COMMAND _IOWR('o', 60, struct video_command)
+#include <uapi/linux/dvb/video.h>
#endif /*_DVBVIDEO_H_*/
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index c18257b0fa72..6dd4787a798a 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -61,7 +61,7 @@ int __dynamic_netdev_dbg(struct _ddebug *descriptor,
const char *fmt, ...);
#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt) \
- static struct _ddebug __used __aligned(8) \
+ static struct _ddebug __aligned(8) \
__attribute__((section("__verbose"))) name = { \
.modname = KBUILD_MODNAME, \
.function = __func__, \
diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h
new file mode 100644
index 000000000000..386440317b0c
--- /dev/null
+++ b/include/linux/elf-fdpic.h
@@ -0,0 +1,51 @@
+/* FDPIC ELF load map
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_ELF_FDPIC_H
+#define _LINUX_ELF_FDPIC_H
+
+#include <uapi/linux/elf-fdpic.h>
+
+/*
+ * binfmt binary parameters structure
+ */
+struct elf_fdpic_params {
+ struct elfhdr hdr; /* ref copy of ELF header */
+ struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */
+ struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */
+ unsigned long elfhdr_addr; /* mapped ELF header user address */
+ unsigned long ph_addr; /* mapped PT_PHDR user address */
+ unsigned long map_addr; /* mapped loadmap user address */
+ unsigned long entry_addr; /* mapped entry user address */
+ unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */
+ unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */
+ unsigned long load_addr; /* user address at which to map binary */
+ unsigned long flags;
+#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */
+#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */
+#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */
+#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant
+ * displacement */
+#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */
+#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */
+#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */
+#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */
+#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */
+};
+
+#ifdef CONFIG_MMU
+extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
+ struct elf_fdpic_params *interp_params,
+ unsigned long *start_stack,
+ unsigned long *start_brk);
+#endif
+
+#endif /* _LINUX_ELF_FDPIC_H */
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 7443a560c9d0..2c26c14cd710 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -68,7 +68,7 @@ enum extcon_cable_name {
EXTCON_VIDEO_OUT,
EXTCON_MECHANICAL,
};
-extern const char *extcon_cable_name[];
+extern const char extcon_cable_name[][CABLE_NAME_MAX + 1];
struct extcon_cable;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 001c7cff2d48..b33cfc97b9ca 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -64,6 +64,73 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
ssize_t bytes, void *private, int ret,
bool is_async);
+#define MAY_EXEC 0x00000001
+#define MAY_WRITE 0x00000002
+#define MAY_READ 0x00000004
+#define MAY_APPEND 0x00000008
+#define MAY_ACCESS 0x00000010
+#define MAY_OPEN 0x00000020
+#define MAY_CHDIR 0x00000040
+/* called from RCU mode, don't block */
+#define MAY_NOT_BLOCK 0x00000080
+
+/*
+ * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond
+ * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
+ */
+
+/* file is open for reading */
+#define FMODE_READ ((__force fmode_t)0x1)
+/* file is open for writing */
+#define FMODE_WRITE ((__force fmode_t)0x2)
+/* file is seekable */
+#define FMODE_LSEEK ((__force fmode_t)0x4)
+/* file can be accessed using pread */
+#define FMODE_PREAD ((__force fmode_t)0x8)
+/* file can be accessed using pwrite */
+#define FMODE_PWRITE ((__force fmode_t)0x10)
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC ((__force fmode_t)0x20)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY ((__force fmode_t)0x40)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL ((__force fmode_t)0x80)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+ (specialy hack for floppy.c) */
+#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100)
+/* 32bit hashes as llseek() offset (for directories) */
+#define FMODE_32BITHASH ((__force fmode_t)0x200)
+/* 64bit hashes as llseek() offset (for directories) */
+#define FMODE_64BITHASH ((__force fmode_t)0x400)
+
+/*
+ * Don't update ctime and mtime.
+ *
+ * Currently a special hack for the XFS open_by_handle ioctl, but we'll
+ * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
+ */
+#define FMODE_NOCMTIME ((__force fmode_t)0x800)
+
+/* Expect random access pattern */
+#define FMODE_RANDOM ((__force fmode_t)0x1000)
+
+/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
+#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000)
+
+/* File is opened with O_PATH; almost nothing can be done with it */
+#define FMODE_PATH ((__force fmode_t)0x4000)
+
+/* File was opened by fanotify and shouldn't generate fanotify events */
+#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
+
+/*
+ * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
+ * that indicates that they should check the contents of the iovec are
+ * valid, but not check the memory that the iovec elements
+ * points too.
+ */
+#define CHECK_IOVEC_ONLY -1
+
/*
* The below are the various read and write types that we support. Some of
* them include behavioral modifiers that send information down to the
@@ -1557,6 +1624,60 @@ struct super_operations {
};
/*
+ * Inode flags - they have no relation to superblock flags now
+ */
+#define S_SYNC 1 /* Writes are synced at once */
+#define S_NOATIME 2 /* Do not update access times */
+#define S_APPEND 4 /* Append-only file */
+#define S_IMMUTABLE 8 /* Immutable file */
+#define S_DEAD 16 /* removed, but still open directory */
+#define S_NOQUOTA 32 /* Inode is not counted to quota */
+#define S_DIRSYNC 64 /* Directory modifications are synchronous */
+#define S_NOCMTIME 128 /* Do not update file c/mtime */
+#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */
+#define S_PRIVATE 512 /* Inode is fs-internal */
+#define S_IMA 1024 /* Inode has an associated IMA struct */
+#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */
+#define S_NOSEC 4096 /* no suid or xattr security attributes */
+
+/*
+ * Note that nosuid etc flags are inode-specific: setting some file-system
+ * flags just means all the inodes inherit those flags by default. It might be
+ * possible to override it selectively if you really wanted to with some
+ * ioctl() that is not currently implemented.
+ *
+ * Exception: MS_RDONLY is always applied to the entire file system.
+ *
+ * Unfortunately, it is possible to change a filesystems flags with it mounted
+ * with files in use. This means that all of the inodes will not have their
+ * i_flags updated. Hence, i_flags no longer inherit the superblock mount
+ * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
+ */
+#define __IS_FLG(inode, flg) ((inode)->i_sb->s_flags & (flg))
+
+#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
+#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \
+ ((inode)->i_flags & S_SYNC))
+#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
+ ((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
+#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK)
+#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
+#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION)
+
+#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA)
+#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND)
+#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE)
+#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL)
+
+#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD)
+#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME)
+#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE)
+#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE)
+#define IS_IMA(inode) ((inode)->i_flags & S_IMA)
+#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT)
+#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC)
+
+/*
* Inode state bits. Protected by inode->i_lock
*
* Three bits determine the dirty state of the inode, I_DIRTY_SYNC,
@@ -1688,6 +1809,11 @@ int sync_inode_metadata(struct inode *inode, int wait);
struct file_system_type {
const char *name;
int fs_flags;
+#define FS_REQUIRES_DEV 1
+#define FS_BINARY_MOUNTDATA 2
+#define FS_HAS_SUBTYPE 4
+#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */
+#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() during rename() internally. */
struct dentry *(*mount) (struct file_system_type *, int,
const char *, void *);
void (*kill_sb) (struct super_block *);
diff --git a/include/linux/hsi/Kbuild b/include/linux/hsi/Kbuild
index 271a770b4784..e69de29bb2d1 100644
--- a/include/linux/hsi/Kbuild
+++ b/include/linux/hsi/Kbuild
@@ -1 +0,0 @@
-header-y += hsi_char.h
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index c0ae76ac4e0b..7806c24e5bc8 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -618,4 +618,20 @@ static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
};
#endif
+/**
+ * IIO_DEGREE_TO_RAD() - Convert degree to rad
+ * @deg: A value in degree
+ *
+ * Returns the given value converted from degree to rad
+ */
+#define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL)
+
+/**
+ * IIO_G_TO_M_S_2() - Convert g to meter / second**2
+ * @g: A value in g
+ *
+ * Returns the given value converted from g to meter / second**2
+ */
+#define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL)
+
#endif /* _INDUSTRIAL_IO_H_ */
diff --git a/include/linux/isdn/Kbuild b/include/linux/isdn/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/isdn/Kbuild
+++ /dev/null
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 569d67d4243e..d452ee191066 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -57,6 +57,7 @@ int memblock_add(phys_addr_t base, phys_addr_t size);
int memblock_remove(phys_addr_t base, phys_addr_t size);
int memblock_free(phys_addr_t base, phys_addr_t size);
int memblock_reserve(phys_addr_t base, phys_addr_t size);
+void memblock_trim_memory(phys_addr_t align);
#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn,
diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h
index 1d28ae90384e..fe03b2d35d4f 100644
--- a/include/linux/mfd/max77693.h
+++ b/include/linux/mfd/max77693.h
@@ -30,7 +30,20 @@
#ifndef __LINUX_MFD_MAX77693_H
#define __LINUX_MFD_MAX77693_H
+struct max77693_reg_data {
+ u8 addr;
+ u8 data;
+};
+
+struct max77693_muic_platform_data {
+ struct max77693_reg_data *init_data;
+ int num_init_data;
+};
+
struct max77693_platform_data {
int wakeup;
+
+ /* muic data */
+ struct max77693_muic_platform_data *muic_data;
};
#endif /* __LINUX_MFD_MAX77693_H */
diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/mmc/Kbuild
+++ /dev/null
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
deleted file mode 100644
index b3322023e9a5..000000000000
--- a/include/linux/netfilter/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-header-y += ipset/
diff --git a/include/linux/netfilter/ipset/Kbuild b/include/linux/netfilter/ipset/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/netfilter/ipset/Kbuild
+++ /dev/null
diff --git a/include/linux/netfilter_arp/Kbuild b/include/linux/netfilter_arp/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/netfilter_arp/Kbuild
+++ /dev/null
diff --git a/include/linux/netfilter_bridge/Kbuild b/include/linux/netfilter_bridge/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/netfilter_bridge/Kbuild
+++ /dev/null
diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/netfilter_ipv4/Kbuild
+++ /dev/null
diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/netfilter_ipv6/Kbuild
+++ /dev/null
diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/nfsd/Kbuild
+++ /dev/null
diff --git a/include/linux/of.h b/include/linux/of.h
index 72843b72a2b2..b4e50d56fc74 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -331,6 +331,13 @@ static inline bool of_have_populated_dt(void)
#define for_each_child_of_node(parent, child) \
while (0)
+static inline struct device_node *of_get_child_by_name(
+ const struct device_node *node,
+ const char *name)
+{
+ return NULL;
+}
+
static inline int of_get_child_count(const struct device_node *np)
{
return 0;
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index c3cdc1025c30..a1984dd037da 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -19,7 +19,7 @@ extern void __iomem *of_iomap(struct device_node *device, int index);
* the address space flags too. The PCI version uses a BAR number
* instead of an absolute index
*/
-extern const u32 *of_get_address(struct device_node *dev, int index,
+extern const __be32 *of_get_address(struct device_node *dev, int index,
u64 *size, unsigned int *flags);
#ifndef pci_address_to_pio
@@ -44,7 +44,7 @@ static inline void __iomem *of_iomap(struct device_node *device, int index)
{
return NULL;
}
-static inline const u32 *of_get_address(struct device_node *dev, int index,
+static inline const __be32 *of_get_address(struct device_node *dev, int index,
u64 *size, unsigned int *flags)
{
return NULL;
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index b8e241125201..535cecf1e02f 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -58,8 +58,8 @@ static inline int of_irq_map_oldworld(struct device_node *device, int index,
#endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
- u32 ointsize, const u32 *addr,
+extern int of_irq_map_raw(struct device_node *parent, const __be32 *intspec,
+ u32 ointsize, const __be32 *addr,
struct of_irq *out_irq);
extern int of_irq_map_one(struct device_node *device, int index,
struct of_irq *out_irq);
diff --git a/include/linux/percpu-rwsem.h b/include/linux/percpu-rwsem.h
index cf80f7e5277f..250a4acddb2b 100644
--- a/include/linux/percpu-rwsem.h
+++ b/include/linux/percpu-rwsem.h
@@ -12,34 +12,27 @@ struct percpu_rw_semaphore {
struct mutex mtx;
};
+#define light_mb() barrier()
+#define heavy_mb() synchronize_sched()
+
static inline void percpu_down_read(struct percpu_rw_semaphore *p)
{
- rcu_read_lock();
+ rcu_read_lock_sched();
if (unlikely(p->locked)) {
- rcu_read_unlock();
+ rcu_read_unlock_sched();
mutex_lock(&p->mtx);
this_cpu_inc(*p->counters);
mutex_unlock(&p->mtx);
return;
}
this_cpu_inc(*p->counters);
- rcu_read_unlock();
+ rcu_read_unlock_sched();
+ light_mb(); /* A, between read of p->locked and read of data, paired with D */
}
static inline void percpu_up_read(struct percpu_rw_semaphore *p)
{
- /*
- * On X86, write operation in this_cpu_dec serves as a memory unlock
- * barrier (i.e. memory accesses may be moved before the write, but
- * no memory accesses are moved past the write).
- * On other architectures this may not be the case, so we need smp_mb()
- * there.
- */
-#if defined(CONFIG_X86) && (!defined(CONFIG_X86_PPRO_FENCE) && !defined(CONFIG_X86_OOSTORE))
- barrier();
-#else
- smp_mb();
-#endif
+ light_mb(); /* B, between read of the data and write to p->counter, paired with C */
this_cpu_dec(*p->counters);
}
@@ -58,14 +51,15 @@ static inline void percpu_down_write(struct percpu_rw_semaphore *p)
{
mutex_lock(&p->mtx);
p->locked = true;
- synchronize_rcu();
+ synchronize_sched(); /* make sure that all readers exit the rcu_read_lock_sched region */
while (__percpu_count(p->counters))
msleep(1);
- smp_rmb(); /* paired with smp_mb() in percpu_sem_up_read() */
+ heavy_mb(); /* C, between read of p->counter and write to data, paired with B */
}
static inline void percpu_up_write(struct percpu_rw_semaphore *p)
{
+ heavy_mb(); /* D, between write to data and write to p->locked, paired with A */
p->locked = false;
mutex_unlock(&p->mtx);
}
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 2e902359aee5..6bfb2faa0b19 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -803,12 +803,16 @@ static inline void perf_event_task_tick(void) { }
do { \
static struct notifier_block fn##_nb __cpuinitdata = \
{ .notifier_call = fn, .priority = CPU_PRI_PERF }; \
+ unsigned long cpu = smp_processor_id(); \
+ unsigned long flags; \
fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \
- (void *)(unsigned long)smp_processor_id()); \
+ (void *)(unsigned long)cpu); \
+ local_irq_save(flags); \
fn(&fn##_nb, (unsigned long)CPU_STARTING, \
- (void *)(unsigned long)smp_processor_id()); \
+ (void *)(unsigned long)cpu); \
+ local_irq_restore(flags); \
fn(&fn##_nb, (unsigned long)CPU_ONLINE, \
- (void *)(unsigned long)smp_processor_id()); \
+ (void *)(unsigned long)cpu); \
register_cpu_notifier(&fn##_nb); \
} while (0)
diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index 00474b047145..65e3e87eacc5 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -47,15 +47,9 @@ static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns)
}
extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns);
-extern void free_pid_ns(struct kref *kref);
extern void zap_pid_ns_processes(struct pid_namespace *pid_ns);
extern int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd);
-
-static inline void put_pid_ns(struct pid_namespace *ns)
-{
- if (ns != &init_pid_ns)
- kref_put(&ns->kref, free_pid_ns);
-}
+extern void put_pid_ns(struct pid_namespace *ns);
#else /* !CONFIG_PID_NS */
#include <linux/err.h>
diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h
index e11ccb4cf48d..0a260d8a18bf 100644
--- a/include/linux/ratelimit.h
+++ b/include/linux/ratelimit.h
@@ -46,20 +46,17 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func);
#define WARN_ON_RATELIMIT(condition, state) \
WARN_ON((condition) && __ratelimit(state))
-#define __WARN_RATELIMIT(condition, state, format...) \
-({ \
- int rtn = 0; \
- if (unlikely(__ratelimit(state))) \
- rtn = WARN(condition, format); \
- rtn; \
-})
-
-#define WARN_RATELIMIT(condition, format...) \
+#define WARN_RATELIMIT(condition, format, ...) \
({ \
static DEFINE_RATELIMIT_STATE(_rs, \
DEFAULT_RATELIMIT_INTERVAL, \
DEFAULT_RATELIMIT_BURST); \
- __WARN_RATELIMIT(condition, &_rs, format); \
+ int rtn = !!(condition); \
+ \
+ if (unlikely(rtn && __ratelimit(&_rs))) \
+ WARN(rtn, format, ##__VA_ARGS__); \
+ \
+ rtn; \
})
#else
@@ -67,15 +64,9 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func);
#define WARN_ON_RATELIMIT(condition, state) \
WARN_ON(condition)
-#define __WARN_RATELIMIT(condition, state, format...) \
-({ \
- int rtn = WARN(condition, format); \
- rtn; \
-})
-
-#define WARN_RATELIMIT(condition, format...) \
+#define WARN_RATELIMIT(condition, format, ...) \
({ \
- int rtn = WARN(condition, format); \
+ int rtn = WARN(condition, format, ##__VA_ARGS__); \
rtn; \
})
diff --git a/include/linux/rbtree_augmented.h b/include/linux/rbtree_augmented.h
index 214caa33433b..2ac60c9cf644 100644
--- a/include/linux/rbtree_augmented.h
+++ b/include/linux/rbtree_augmented.h
@@ -24,6 +24,7 @@
#ifndef _LINUX_RBTREE_AUGMENTED_H
#define _LINUX_RBTREE_AUGMENTED_H
+#include <linux/compiler.h>
#include <linux/rbtree.h>
/*
diff --git a/include/linux/spi/Kbuild b/include/linux/spi/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/spi/Kbuild
+++ /dev/null
diff --git a/include/linux/spi/spi-tegra.h b/include/linux/spi/spi-tegra.h
new file mode 100644
index 000000000000..786932c62edb
--- /dev/null
+++ b/include/linux/spi/spi-tegra.h
@@ -0,0 +1,40 @@
+/*
+ * spi-tegra.h: SPI interface for Nvidia Tegra20 SLINK controller.
+ *
+ * Copyright (C) 2011 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _LINUX_SPI_TEGRA_H
+#define _LINUX_SPI_TEGRA_H
+
+struct tegra_spi_platform_data {
+ int dma_req_sel;
+ unsigned int spi_max_frequency;
+};
+
+/*
+ * Controller data from device to pass some info like
+ * hw based chip select can be used or not and if yes
+ * then CS hold and setup time.
+ */
+struct tegra_spi_device_controller_data {
+ bool is_hw_based_cs;
+ int cs_setup_clk_count;
+ int cs_hold_clk_count;
+};
+
+#endif /* _LINUX_SPI_TEGRA_H */
diff --git a/include/linux/sunrpc/Kbuild b/include/linux/sunrpc/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/sunrpc/Kbuild
+++ /dev/null
diff --git a/include/linux/tc_act/Kbuild b/include/linux/tc_act/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/tc_act/Kbuild
+++ /dev/null
diff --git a/include/linux/tc_ematch/Kbuild b/include/linux/tc_ematch/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/tc_ematch/Kbuild
+++ /dev/null
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 8a7fc4be2d75..60b7aac15e0e 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -191,7 +191,8 @@ struct tcp_sock {
u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */
early_retrans_delayed:1, /* Delayed ER timer installed */
syn_data:1, /* SYN includes data */
- syn_fastopen:1; /* SYN includes Fast Open option */
+ syn_fastopen:1, /* SYN includes Fast Open option */
+ syn_data_acked:1;/* data in SYN is acked by SYN-ACK */
/* RTT measurement */
u32 srtt; /* smoothed round trip time << 3 */
diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h
index e6f0331e3d45..24594571c5a3 100644
--- a/include/linux/uprobes.h
+++ b/include/linux/uprobes.h
@@ -35,16 +35,6 @@ struct inode;
# include <asm/uprobes.h>
#endif
-/* flags that denote/change uprobes behaviour */
-
-/* Have a copy of original instruction */
-#define UPROBE_COPY_INSN 0x1
-
-/* Dont run handlers when first register/ last unregister in progress*/
-#define UPROBE_RUN_HANDLER 0x2
-/* Can skip singlestep */
-#define UPROBE_SKIP_SSTEP 0x4
-
struct uprobe_consumer {
int (*handler)(struct uprobe_consumer *self, struct pt_regs *regs);
/*
@@ -59,7 +49,6 @@ struct uprobe_consumer {
#ifdef CONFIG_UPROBES
enum uprobe_task_state {
UTASK_RUNNING,
- UTASK_BP_HIT,
UTASK_SSTEP,
UTASK_SSTEP_ACK,
UTASK_SSTEP_TRAPPED,
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 07915a32fb9d..10278d18709c 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1778,17 +1778,6 @@ static inline int usb_translate_errors(int error_code)
extern void usb_register_notify(struct notifier_block *nb);
extern void usb_unregister_notify(struct notifier_block *nb);
-#ifdef DEBUG
-#define dbg(format, arg...) \
- printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg)
-#else
-#define dbg(format, arg...) \
-do { \
- if (0) \
- printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \
-} while (0)
-#endif
-
/* debugfs stuff */
extern struct dentry *usb_debug_root;
diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
index b607f3532e88..e69de29bb2d1 100644
--- a/include/linux/usb/Kbuild
+++ b/include/linux/usb/Kbuild
@@ -1,10 +0,0 @@
-header-y += audio.h
-header-y += cdc.h
-header-y += ch9.h
-header-y += ch11.h
-header-y += functionfs.h
-header-y += gadgetfs.h
-header-y += midi.h
-header-y += g_printer.h
-header-y += tmc.h
-header-y += video.h
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index a54b8255d75f..3d84619110a4 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -17,531 +17,11 @@
* Types and defines in this file are either specific to version 1.0 of
* this standard or common for newer versions.
*/
-
#ifndef __LINUX_USB_AUDIO_H
#define __LINUX_USB_AUDIO_H
-#include <linux/types.h>
-
-/* bInterfaceProtocol values to denote the version of the standard used */
-#define UAC_VERSION_1 0x00
-#define UAC_VERSION_2 0x20
-
-/* A.2 Audio Interface Subclass Codes */
-#define USB_SUBCLASS_AUDIOCONTROL 0x01
-#define USB_SUBCLASS_AUDIOSTREAMING 0x02
-#define USB_SUBCLASS_MIDISTREAMING 0x03
-
-/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */
-#define UAC_HEADER 0x01
-#define UAC_INPUT_TERMINAL 0x02
-#define UAC_OUTPUT_TERMINAL 0x03
-#define UAC_MIXER_UNIT 0x04
-#define UAC_SELECTOR_UNIT 0x05
-#define UAC_FEATURE_UNIT 0x06
-#define UAC1_PROCESSING_UNIT 0x07
-#define UAC1_EXTENSION_UNIT 0x08
-
-/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
-#define UAC_AS_GENERAL 0x01
-#define UAC_FORMAT_TYPE 0x02
-#define UAC_FORMAT_SPECIFIC 0x03
-
-/* A.7 Processing Unit Process Types */
-#define UAC_PROCESS_UNDEFINED 0x00
-#define UAC_PROCESS_UP_DOWNMIX 0x01
-#define UAC_PROCESS_DOLBY_PROLOGIC 0x02
-#define UAC_PROCESS_STEREO_EXTENDER 0x03
-#define UAC_PROCESS_REVERB 0x04
-#define UAC_PROCESS_CHORUS 0x05
-#define UAC_PROCESS_DYN_RANGE_COMP 0x06
-
-/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
-#define UAC_EP_GENERAL 0x01
-
-/* A.9 Audio Class-Specific Request Codes */
-#define UAC_SET_ 0x00
-#define UAC_GET_ 0x80
-
-#define UAC__CUR 0x1
-#define UAC__MIN 0x2
-#define UAC__MAX 0x3
-#define UAC__RES 0x4
-#define UAC__MEM 0x5
-
-#define UAC_SET_CUR (UAC_SET_ | UAC__CUR)
-#define UAC_GET_CUR (UAC_GET_ | UAC__CUR)
-#define UAC_SET_MIN (UAC_SET_ | UAC__MIN)
-#define UAC_GET_MIN (UAC_GET_ | UAC__MIN)
-#define UAC_SET_MAX (UAC_SET_ | UAC__MAX)
-#define UAC_GET_MAX (UAC_GET_ | UAC__MAX)
-#define UAC_SET_RES (UAC_SET_ | UAC__RES)
-#define UAC_GET_RES (UAC_GET_ | UAC__RES)
-#define UAC_SET_MEM (UAC_SET_ | UAC__MEM)
-#define UAC_GET_MEM (UAC_GET_ | UAC__MEM)
-
-#define UAC_GET_STAT 0xff
-
-/* A.10 Control Selector Codes */
-
-/* A.10.1 Terminal Control Selectors */
-#define UAC_TERM_COPY_PROTECT 0x01
-
-/* A.10.2 Feature Unit Control Selectors */
-#define UAC_FU_MUTE 0x01
-#define UAC_FU_VOLUME 0x02
-#define UAC_FU_BASS 0x03
-#define UAC_FU_MID 0x04
-#define UAC_FU_TREBLE 0x05
-#define UAC_FU_GRAPHIC_EQUALIZER 0x06
-#define UAC_FU_AUTOMATIC_GAIN 0x07
-#define UAC_FU_DELAY 0x08
-#define UAC_FU_BASS_BOOST 0x09
-#define UAC_FU_LOUDNESS 0x0a
-
-#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1))
-
-/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
-#define UAC_UD_ENABLE 0x01
-#define UAC_UD_MODE_SELECT 0x02
-
-/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
-#define UAC_DP_ENABLE 0x01
-#define UAC_DP_MODE_SELECT 0x02
-
-/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
-#define UAC_3D_ENABLE 0x01
-#define UAC_3D_SPACE 0x02
-
-/* A.10.3.4 Reverberation Processing Unit Control Selectors */
-#define UAC_REVERB_ENABLE 0x01
-#define UAC_REVERB_LEVEL 0x02
-#define UAC_REVERB_TIME 0x03
-#define UAC_REVERB_FEEDBACK 0x04
-
-/* A.10.3.5 Chorus Processing Unit Control Selectors */
-#define UAC_CHORUS_ENABLE 0x01
-#define UAC_CHORUS_LEVEL 0x02
-#define UAC_CHORUS_RATE 0x03
-#define UAC_CHORUS_DEPTH 0x04
-
-/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
-#define UAC_DCR_ENABLE 0x01
-#define UAC_DCR_RATE 0x02
-#define UAC_DCR_MAXAMPL 0x03
-#define UAC_DCR_THRESHOLD 0x04
-#define UAC_DCR_ATTACK_TIME 0x05
-#define UAC_DCR_RELEASE_TIME 0x06
-
-/* A.10.4 Extension Unit Control Selectors */
-#define UAC_XU_ENABLE 0x01
-
-/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
-#define UAC_MS_HEADER 0x01
-#define UAC_MIDI_IN_JACK 0x02
-#define UAC_MIDI_OUT_JACK 0x03
-
-/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */
-#define UAC_MS_GENERAL 0x01
-
-/* Terminals - 2.1 USB Terminal Types */
-#define UAC_TERMINAL_UNDEFINED 0x100
-#define UAC_TERMINAL_STREAMING 0x101
-#define UAC_TERMINAL_VENDOR_SPEC 0x1FF
-
-/* Terminal Control Selectors */
-/* 4.3.2 Class-Specific AC Interface Descriptor */
-struct uac1_ac_header_descriptor {
- __u8 bLength; /* 8 + n */
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* UAC_MS_HEADER */
- __le16 bcdADC; /* 0x0100 */
- __le16 wTotalLength; /* includes Unit and Terminal desc. */
- __u8 bInCollection; /* n */
- __u8 baInterfaceNr[]; /* [n] */
-} __attribute__ ((packed));
-
-#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n))
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \
-struct uac1_ac_header_descriptor_##n { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubtype; \
- __le16 bcdADC; \
- __le16 wTotalLength; \
- __u8 bInCollection; \
- __u8 baInterfaceNr[n]; \
-} __attribute__ ((packed))
-
-/* 4.3.2.1 Input Terminal Descriptor */
-struct uac_input_terminal_descriptor {
- __u8 bLength; /* in bytes: 12 */
- __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
- __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */
- __u8 bTerminalID; /* Constant uniquely terminal ID */
- __le16 wTerminalType; /* USB Audio Terminal Types */
- __u8 bAssocTerminal; /* ID of the Output Terminal associated */
- __u8 bNrChannels; /* Number of logical output channels */
- __le16 wChannelConfig;
- __u8 iChannelNames;
- __u8 iTerminal;
-} __attribute__ ((packed));
-
-#define UAC_DT_INPUT_TERMINAL_SIZE 12
-
-/* Terminals - 2.2 Input Terminal Types */
-#define UAC_INPUT_TERMINAL_UNDEFINED 0x200
-#define UAC_INPUT_TERMINAL_MICROPHONE 0x201
-#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202
-#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203
-#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204
-#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
-#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
-
-/* Terminals - control selectors */
-
-#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01
-
-/* 4.3.2.2 Output Terminal Descriptor */
-struct uac1_output_terminal_descriptor {
- __u8 bLength; /* in bytes: 9 */
- __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
- __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */
- __u8 bTerminalID; /* Constant uniquely terminal ID */
- __le16 wTerminalType; /* USB Audio Terminal Types */
- __u8 bAssocTerminal; /* ID of the Input Terminal associated */
- __u8 bSourceID; /* ID of the connected Unit or Terminal*/
- __u8 iTerminal;
-} __attribute__ ((packed));
-
-#define UAC_DT_OUTPUT_TERMINAL_SIZE 9
-
-/* Terminals - 2.3 Output Terminal Types */
-#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300
-#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301
-#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302
-#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303
-#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304
-#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305
-#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
-#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
-
-/* Set bControlSize = 2 as default setting */
-#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \
-struct uac_feature_unit_descriptor_##ch { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubtype; \
- __u8 bUnitID; \
- __u8 bSourceID; \
- __u8 bControlSize; \
- __le16 bmaControls[ch + 1]; \
- __u8 iFeature; \
-} __attribute__ ((packed))
-
-/* 4.3.2.3 Mixer Unit Descriptor */
-struct uac_mixer_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bUnitID;
- __u8 bNrInPins;
- __u8 baSourceID[];
-} __attribute__ ((packed));
+#include <uapi/linux/usb/audio.h>
-static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc)
-{
- return desc->baSourceID[desc->bNrInPins];
-}
-
-static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc,
- int protocol)
-{
- if (protocol == UAC_VERSION_1)
- return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
- desc->baSourceID[desc->bNrInPins + 1];
- else
- return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
- (desc->baSourceID[desc->bNrInPins + 3] << 16) |
- (desc->baSourceID[desc->bNrInPins + 2] << 8) |
- (desc->baSourceID[desc->bNrInPins + 1]);
-}
-
-static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- desc->baSourceID[desc->bNrInPins + 3] :
- desc->baSourceID[desc->bNrInPins + 5];
-}
-
-static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- &desc->baSourceID[desc->bNrInPins + 4] :
- &desc->baSourceID[desc->bNrInPins + 6];
-}
-
-static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc)
-{
- __u8 *raw = (__u8 *) desc;
- return raw[desc->bLength - 1];
-}
-
-/* 4.3.2.4 Selector Unit Descriptor */
-struct uac_selector_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bUintID;
- __u8 bNrInPins;
- __u8 baSourceID[];
-} __attribute__ ((packed));
-
-static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
-{
- __u8 *raw = (__u8 *) desc;
- return raw[desc->bLength - 1];
-}
-
-/* 4.3.2.5 Feature Unit Descriptor */
-struct uac_feature_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bUnitID;
- __u8 bSourceID;
- __u8 bControlSize;
- __u8 bmaControls[0]; /* variable length */
-} __attribute__((packed));
-
-static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc)
-{
- __u8 *raw = (__u8 *) desc;
- return raw[desc->bLength - 1];
-}
-
-/* 4.3.2.6 Processing Unit Descriptors */
-struct uac_processing_unit_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bUnitID;
- __u16 wProcessType;
- __u8 bNrInPins;
- __u8 baSourceID[];
-} __attribute__ ((packed));
-
-static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc)
-{
- return desc->baSourceID[desc->bNrInPins];
-}
-
-static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- if (protocol == UAC_VERSION_1)
- return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
- desc->baSourceID[desc->bNrInPins + 1];
- else
- return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
- (desc->baSourceID[desc->bNrInPins + 3] << 16) |
- (desc->baSourceID[desc->bNrInPins + 2] << 8) |
- (desc->baSourceID[desc->bNrInPins + 1]);
-}
-
-static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- desc->baSourceID[desc->bNrInPins + 3] :
- desc->baSourceID[desc->bNrInPins + 5];
-}
-
-static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- desc->baSourceID[desc->bNrInPins + 4] :
- desc->baSourceID[desc->bNrInPins + 6];
-}
-
-static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- return (protocol == UAC_VERSION_1) ?
- &desc->baSourceID[desc->bNrInPins + 5] :
- &desc->baSourceID[desc->bNrInPins + 7];
-}
-
-static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
- return desc->baSourceID[desc->bNrInPins + control_size];
-}
-
-static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc,
- int protocol)
-{
- __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
- return &desc->baSourceID[desc->bNrInPins + control_size + 1];
-}
-
-/* 4.5.2 Class-Specific AS Interface Descriptor */
-struct uac1_as_header_descriptor {
- __u8 bLength; /* in bytes: 7 */
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* AS_GENERAL */
- __u8 bTerminalLink; /* Terminal ID of connected Terminal */
- __u8 bDelay; /* Delay introduced by the data path */
- __le16 wFormatTag; /* The Audio Data Format */
-} __attribute__ ((packed));
-
-#define UAC_DT_AS_HEADER_SIZE 7
-
-/* Formats - A.1.1 Audio Data Format Type I Codes */
-#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0
-#define UAC_FORMAT_TYPE_I_PCM 0x1
-#define UAC_FORMAT_TYPE_I_PCM8 0x2
-#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3
-#define UAC_FORMAT_TYPE_I_ALAW 0x4
-#define UAC_FORMAT_TYPE_I_MULAW 0x5
-
-struct uac_format_type_i_continuous_descriptor {
- __u8 bLength; /* in bytes: 8 + (ns * 3) */
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* FORMAT_TYPE */
- __u8 bFormatType; /* FORMAT_TYPE_1 */
- __u8 bNrChannels; /* physical channels in the stream */
- __u8 bSubframeSize; /* */
- __u8 bBitResolution;
- __u8 bSamFreqType;
- __u8 tLowerSamFreq[3];
- __u8 tUpperSamFreq[3];
-} __attribute__ ((packed));
-
-#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14
-
-struct uac_format_type_i_discrete_descriptor {
- __u8 bLength; /* in bytes: 8 + (ns * 3) */
- __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
- __u8 bDescriptorSubtype; /* FORMAT_TYPE */
- __u8 bFormatType; /* FORMAT_TYPE_1 */
- __u8 bNrChannels; /* physical channels in the stream */
- __u8 bSubframeSize; /* */
- __u8 bBitResolution;
- __u8 bSamFreqType;
- __u8 tSamFreq[][3];
-} __attribute__ ((packed));
-
-#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \
-struct uac_format_type_i_discrete_descriptor_##n { \
- __u8 bLength; \
- __u8 bDescriptorType; \
- __u8 bDescriptorSubtype; \
- __u8 bFormatType; \
- __u8 bNrChannels; \
- __u8 bSubframeSize; \
- __u8 bBitResolution; \
- __u8 bSamFreqType; \
- __u8 tSamFreq[n][3]; \
-} __attribute__ ((packed))
-
-#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
-
-struct uac_format_type_i_ext_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bFormatType;
- __u8 bSubslotSize;
- __u8 bBitResolution;
- __u8 bHeaderLength;
- __u8 bControlSize;
- __u8 bSideBandProtocol;
-} __attribute__((packed));
-
-/* Formats - Audio Data Format Type I Codes */
-
-#define UAC_FORMAT_TYPE_II_MPEG 0x1001
-#define UAC_FORMAT_TYPE_II_AC3 0x1002
-
-struct uac_format_type_ii_discrete_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bFormatType;
- __le16 wMaxBitRate;
- __le16 wSamplesPerFrame;
- __u8 bSamFreqType;
- __u8 tSamFreq[][3];
-} __attribute__((packed));
-
-struct uac_format_type_ii_ext_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDescriptorSubtype;
- __u8 bFormatType;
- __u16 wMaxBitRate;
- __u16 wSamplesPerFrame;
- __u8 bHeaderLength;
- __u8 bSideBandProtocol;
-} __attribute__((packed));
-
-/* type III */
-#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006
-
-/* Formats - A.2 Format Type Codes */
-#define UAC_FORMAT_TYPE_UNDEFINED 0x0
-#define UAC_FORMAT_TYPE_I 0x1
-#define UAC_FORMAT_TYPE_II 0x2
-#define UAC_FORMAT_TYPE_III 0x3
-#define UAC_EXT_FORMAT_TYPE_I 0x81
-#define UAC_EXT_FORMAT_TYPE_II 0x82
-#define UAC_EXT_FORMAT_TYPE_III 0x83
-
-struct uac_iso_endpoint_descriptor {
- __u8 bLength; /* in bytes: 7 */
- __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
- __u8 bDescriptorSubtype; /* EP_GENERAL */
- __u8 bmAttributes;
- __u8 bLockDelayUnits;
- __le16 wLockDelay;
-} __attribute__((packed));
-#define UAC_ISO_ENDPOINT_DESC_SIZE 7
-
-#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01
-#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
-#define UAC_EP_CS_ATTR_FILL_MAX 0x80
-
-/* status word format (3.7.1.1) */
-
-#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f
-#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0
-#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1
-#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2
-
-#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7)
-#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6)
-
-struct uac1_status_word {
- __u8 bStatusType;
- __u8 bOriginator;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
struct usb_audio_control {
struct list_head list;
@@ -561,6 +41,4 @@ struct usb_audio_control_selector {
struct usb_descriptor_header *desc;
};
-#endif /* __KERNEL__ */
-
#endif /* __LINUX_USB_AUDIO_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index d1d732c2838d..9c210f2283df 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -29,887 +29,11 @@
* someone that the two other points are non-issues for that
* particular descriptor type.
*/
-
#ifndef __LINUX_USB_CH9_H
#define __LINUX_USB_CH9_H
-#include <linux/types.h> /* __u8 etc */
-#include <asm/byteorder.h> /* le16_to_cpu */
-
-/*-------------------------------------------------------------------------*/
-
-/* CONTROL REQUEST SUPPORT */
-
-/*
- * USB directions
- *
- * This bit flag is used in endpoint descriptors' bEndpointAddress field.
- * It's also one of three fields in control requests bRequestType.
- */
-#define USB_DIR_OUT 0 /* to device */
-#define USB_DIR_IN 0x80 /* to host */
-
-/*
- * USB types, the second of three bRequestType fields
- */
-#define USB_TYPE_MASK (0x03 << 5)
-#define USB_TYPE_STANDARD (0x00 << 5)
-#define USB_TYPE_CLASS (0x01 << 5)
-#define USB_TYPE_VENDOR (0x02 << 5)
-#define USB_TYPE_RESERVED (0x03 << 5)
-
-/*
- * USB recipients, the third of three bRequestType fields
- */
-#define USB_RECIP_MASK 0x1f
-#define USB_RECIP_DEVICE 0x00
-#define USB_RECIP_INTERFACE 0x01
-#define USB_RECIP_ENDPOINT 0x02
-#define USB_RECIP_OTHER 0x03
-/* From Wireless USB 1.0 */
-#define USB_RECIP_PORT 0x04
-#define USB_RECIP_RPIPE 0x05
-
-/*
- * Standard requests, for the bRequest field of a SETUP packet.
- *
- * These are qualified by the bRequestType field, so that for example
- * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
- * by a GET_STATUS request.
- */
-#define USB_REQ_GET_STATUS 0x00
-#define USB_REQ_CLEAR_FEATURE 0x01
-#define USB_REQ_SET_FEATURE 0x03
-#define USB_REQ_SET_ADDRESS 0x05
-#define USB_REQ_GET_DESCRIPTOR 0x06
-#define USB_REQ_SET_DESCRIPTOR 0x07
-#define USB_REQ_GET_CONFIGURATION 0x08
-#define USB_REQ_SET_CONFIGURATION 0x09
-#define USB_REQ_GET_INTERFACE 0x0A
-#define USB_REQ_SET_INTERFACE 0x0B
-#define USB_REQ_SYNCH_FRAME 0x0C
-#define USB_REQ_SET_SEL 0x30
-#define USB_REQ_SET_ISOCH_DELAY 0x31
-
-#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
-#define USB_REQ_GET_ENCRYPTION 0x0E
-#define USB_REQ_RPIPE_ABORT 0x0E
-#define USB_REQ_SET_HANDSHAKE 0x0F
-#define USB_REQ_RPIPE_RESET 0x0F
-#define USB_REQ_GET_HANDSHAKE 0x10
-#define USB_REQ_SET_CONNECTION 0x11
-#define USB_REQ_SET_SECURITY_DATA 0x12
-#define USB_REQ_GET_SECURITY_DATA 0x13
-#define USB_REQ_SET_WUSB_DATA 0x14
-#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
-#define USB_REQ_LOOPBACK_DATA_READ 0x16
-#define USB_REQ_SET_INTERFACE_DS 0x17
-
-/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
- * used by hubs to put ports into a new L1 suspend state, except that it
- * forgot to define its number ...
- */
-
-/*
- * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
- * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
- * are at most sixteen features of each type.) Hubs may also support a
- * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
- */
-#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
-#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
-#define USB_DEVICE_BATTERY 2 /* (wireless) */
-#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
-#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
-#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
-#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
-
-/*
- * Test Mode Selectors
- * See USB 2.0 spec Table 9-7
- */
-#define TEST_J 1
-#define TEST_K 2
-#define TEST_SE0_NAK 3
-#define TEST_PACKET 4
-#define TEST_FORCE_EN 5
-
-/*
- * New Feature Selectors as added by USB 3.0
- * See USB 3.0 spec Table 9-6
- */
-#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */
-#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */
-#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */
-#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
-
-#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
-/*
- * Suspend Options, Table 9-7 USB 3.0 spec
- */
-#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
-#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
-
-#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
-
-/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
-#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
-#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */
-#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */
-
-/**
- * struct usb_ctrlrequest - SETUP data for a USB device control request
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (le16 byte order)
- * @wIndex: matches the USB wIndex field (le16 byte order)
- * @wLength: matches the USB wLength field (le16 byte order)
- *
- * This structure is used to send control requests to a USB device. It matches
- * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
- * USB spec for a fuller description of the different fields, and what they are
- * used for.
- *
- * Note that the driver for any interface can issue control requests.
- * For most devices, interfaces don't coordinate with each other, so
- * such requests may be made at any time.
- */
-struct usb_ctrlrequest {
- __u8 bRequestType;
- __u8 bRequest;
- __le16 wValue;
- __le16 wIndex;
- __le16 wLength;
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
- * (rarely) accepted by SET_DESCRIPTOR.
- *
- * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire". Within the kernel and when exposed
- * through the Linux-USB APIs, they are not converted to cpu byte
- * order; it is the responsibility of the client code to do this.
- * The single exception is when device and configuration descriptors (but
- * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
- * in this case the fields are converted to host endianness by the kernel.
- */
-
-/*
- * Descriptor types ... USB 2.0 spec table 9.5
- */
-#define USB_DT_DEVICE 0x01
-#define USB_DT_CONFIG 0x02
-#define USB_DT_STRING 0x03
-#define USB_DT_INTERFACE 0x04
-#define USB_DT_ENDPOINT 0x05
-#define USB_DT_DEVICE_QUALIFIER 0x06
-#define USB_DT_OTHER_SPEED_CONFIG 0x07
-#define USB_DT_INTERFACE_POWER 0x08
-/* these are from a minor usb 2.0 revision (ECN) */
-#define USB_DT_OTG 0x09
-#define USB_DT_DEBUG 0x0a
-#define USB_DT_INTERFACE_ASSOCIATION 0x0b
-/* these are from the Wireless USB spec */
-#define USB_DT_SECURITY 0x0c
-#define USB_DT_KEY 0x0d
-#define USB_DT_ENCRYPTION_TYPE 0x0e
-#define USB_DT_BOS 0x0f
-#define USB_DT_DEVICE_CAPABILITY 0x10
-#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
-#define USB_DT_WIRE_ADAPTER 0x21
-#define USB_DT_RPIPE 0x22
-#define USB_DT_CS_RADIO_CONTROL 0x23
-/* From the T10 UAS specification */
-#define USB_DT_PIPE_USAGE 0x24
-/* From the USB 3.0 spec */
-#define USB_DT_SS_ENDPOINT_COMP 0x30
-
-/* Conventional codes for class-specific descriptors. The convention is
- * defined in the USB "Common Class" Spec (3.11). Individual class specs
- * are authoritative for their usage, not the "common class" writeup.
- */
-#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE)
-#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG)
-#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING)
-#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE)
-#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT)
-
-/* All standard descriptors have these 2 fields at the beginning */
-struct usb_descriptor_header {
- __u8 bLength;
- __u8 bDescriptorType;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE: Device descriptor */
-struct usb_device_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __le16 idVendor;
- __le16 idProduct;
- __le16 bcdDevice;
- __u8 iManufacturer;
- __u8 iProduct;
- __u8 iSerialNumber;
- __u8 bNumConfigurations;
-} __attribute__ ((packed));
-
-#define USB_DT_DEVICE_SIZE 18
-
-
-/*
- * Device and/or Interface Class codes
- * as found in bDeviceClass or bInterfaceClass
- * and defined by www.usb.org documents
- */
-#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
-#define USB_CLASS_AUDIO 1
-#define USB_CLASS_COMM 2
-#define USB_CLASS_HID 3
-#define USB_CLASS_PHYSICAL 5
-#define USB_CLASS_STILL_IMAGE 6
-#define USB_CLASS_PRINTER 7
-#define USB_CLASS_MASS_STORAGE 8
-#define USB_CLASS_HUB 9
-#define USB_CLASS_CDC_DATA 0x0a
-#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
-#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
-#define USB_CLASS_VIDEO 0x0e
-#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
-#define USB_CLASS_MISC 0xef
-#define USB_CLASS_APP_SPEC 0xfe
-#define USB_CLASS_VENDOR_SPEC 0xff
-
-#define USB_SUBCLASS_VENDOR_SPEC 0xff
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_CONFIG: Configuration descriptor information.
- *
- * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
- * descriptor type is different. Highspeed-capable devices can look
- * different depending on what speed they're currently running. Only
- * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
- * descriptors.
- */
-struct usb_config_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumInterfaces;
- __u8 bConfigurationValue;
- __u8 iConfiguration;
- __u8 bmAttributes;
- __u8 bMaxPower;
-} __attribute__ ((packed));
-
-#define USB_DT_CONFIG_SIZE 9
-
-/* from config descriptor bmAttributes */
-#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
-#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
-#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
-#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_STRING: String descriptor */
-struct usb_string_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wData[1]; /* UTF-16LE encoded */
-} __attribute__ ((packed));
-
-/* note that "string" zero is special, it holds language codes that
- * the device supports, not Unicode characters.
- */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE: Interface descriptor */
-struct usb_interface_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bInterfaceNumber;
- __u8 bAlternateSetting;
- __u8 bNumEndpoints;
- __u8 bInterfaceClass;
- __u8 bInterfaceSubClass;
- __u8 bInterfaceProtocol;
- __u8 iInterface;
-} __attribute__ ((packed));
-
-#define USB_DT_INTERFACE_SIZE 9
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENDPOINT: Endpoint descriptor */
-struct usb_endpoint_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEndpointAddress;
- __u8 bmAttributes;
- __le16 wMaxPacketSize;
- __u8 bInterval;
-
- /* NOTE: these two are _only_ in audio endpoints. */
- /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
- __u8 bRefresh;
- __u8 bSynchAddress;
-} __attribute__ ((packed));
-
-#define USB_DT_ENDPOINT_SIZE 7
-#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
-
-
-/*
- * Endpoints
- */
-#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
-#define USB_ENDPOINT_DIR_MASK 0x80
-
-#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL 0
-#define USB_ENDPOINT_XFER_ISOC 1
-#define USB_ENDPOINT_XFER_BULK 2
-#define USB_ENDPOINT_XFER_INT 3
-#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
-
-/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
-#define USB_ENDPOINT_INTRTYPE 0x30
-#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
-#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
-
-#define USB_ENDPOINT_SYNCTYPE 0x0c
-#define USB_ENDPOINT_SYNC_NONE (0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
-
-#define USB_ENDPOINT_USAGE_MASK 0x30
-#define USB_ENDPOINT_USAGE_DATA 0x00
-#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
-#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
-
-/*-------------------------------------------------------------------------*/
-
-/**
- * usb_endpoint_num - get the endpoint's number
- * @epd: endpoint to be checked
- *
- * Returns @epd's number: 0 to 15.
- */
-static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
-{
- return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-}
-
-/**
- * usb_endpoint_type - get the endpoint's transfer type
- * @epd: endpoint to be checked
- *
- * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
- * to @epd's transfer type.
- */
-static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
-{
- return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-}
-
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_bulk(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_control - check if the endpoint has control transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type control, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_control(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_CONTROL);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_int(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_isoc(
- const struct usb_endpoint_descriptor *epd)
-{
- return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_in(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_out(
- const struct usb_endpoint_descriptor *epd)
-{
- return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_maxp - get endpoint's max packet size
- * @epd: endpoint to be checked
- *
- * Returns @epd's max packet
- */
-static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
-{
- return __le16_to_cpu(epd->wMaxPacketSize);
-}
-
-static inline int usb_endpoint_interrupt_type(
- const struct usb_endpoint_descriptor *epd)
-{
- return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
-struct usb_ss_ep_comp_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bMaxBurst;
- __u8 bmAttributes;
- __le16 wBytesPerInterval;
-} __attribute__ ((packed));
-
-#define USB_DT_SS_EP_COMP_SIZE 6
-
-/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-static inline int
-usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
-{
- int max_streams;
-
- if (!comp)
- return 0;
-
- max_streams = comp->bmAttributes & 0x1f;
-
- if (!max_streams)
- return 0;
-
- max_streams = 1 << max_streams;
-
- return max_streams;
-}
-
-/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
-#define USB_SS_MULT(p) (1 + ((p) & 0x3))
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
-struct usb_qualifier_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __u8 bNumConfigurations;
- __u8 bRESERVED;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_OTG (from OTG 1.0a supplement) */
-struct usb_otg_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bmAttributes; /* support for HNP, SRP, etc */
-} __attribute__ ((packed));
-
-/* from usb_otg_descriptor.bmAttributes */
-#define USB_OTG_SRP (1 << 0)
-#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
-struct usb_debug_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- /* bulk endpoints with 8 byte maxpacket */
- __u8 bDebugInEndpoint;
- __u8 bDebugOutEndpoint;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
-struct usb_interface_assoc_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bFirstInterface;
- __u8 bInterfaceCount;
- __u8 bFunctionClass;
- __u8 bFunctionSubClass;
- __u8 bFunctionProtocol;
- __u8 iFunction;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SECURITY: group of wireless security descriptors, including
- * encryption types available for setting up a CC/association.
- */
-struct usb_security_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumEncryptionTypes;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
- * may be retrieved.
- */
-struct usb_key_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 bKeyData[0];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
-struct usb_encryption_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEncryptionType;
-#define USB_ENC_TYPE_UNSECURE 0
-#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
-#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
-#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
- __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
- __u8 bAuthKeyIndex;
-} __attribute__((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_BOS: group of device-level capabilities */
-struct usb_bos_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumDeviceCaps;
-} __attribute__((packed));
-
-#define USB_DT_BOS_SIZE 5
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
-struct usb_dev_cap_header {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-} __attribute__((packed));
-
-#define USB_CAP_TYPE_WIRELESS_USB 1
-
-struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-
- __u8 bmAttributes;
-#define USB_WIRELESS_P2P_DRD (1 << 1)
-#define USB_WIRELESS_BEACON_MASK (3 << 2)
-#define USB_WIRELESS_BEACON_SELF (1 << 2)
-#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
-#define USB_WIRELESS_BEACON_NONE (3 << 2)
- __le16 wPHYRates; /* bit rates, Mbps */
-#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
-#define USB_WIRELESS_PHY_80 (1 << 1)
-#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
-#define USB_WIRELESS_PHY_160 (1 << 3)
-#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
-#define USB_WIRELESS_PHY_320 (1 << 5)
-#define USB_WIRELESS_PHY_400 (1 << 6)
-#define USB_WIRELESS_PHY_480 (1 << 7)
- __u8 bmTFITXPowerInfo; /* TFI power levels */
- __u8 bmFFITXPowerInfo; /* FFI power levels */
- __le16 bmBandGroup;
- __u8 bReserved;
-} __attribute__((packed));
-
-/* USB 2.0 Extension descriptor */
-#define USB_CAP_TYPE_EXT 2
-
-struct usb_ext_cap_descriptor { /* Link Power Management */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
- __le32 bmAttributes;
-#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
-#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */
-#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/
-#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */
-#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
-#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
-} __attribute__((packed));
-
-#define USB_DT_USB_EXT_CAP_SIZE 7
-
-/*
- * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
- * specific device level capabilities
- */
-#define USB_SS_CAP_TYPE 3
-struct usb_ss_cap_descriptor { /* Link Power Management */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
- __u8 bmAttributes;
-#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */
- __le16 wSpeedSupported;
-#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */
-#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */
-#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */
-#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */
- __u8 bFunctionalitySupport;
- __u8 bU1devExitLat;
- __le16 bU2DevExitLat;
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CAP_SIZE 10
-
-/*
- * Container ID Capability descriptor: Defines the instance unique ID used to
- * identify the instance across all operating modes
- */
-#define CONTAINER_ID_TYPE 4
-struct usb_ss_container_id_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
- __u8 bReserved;
- __u8 ContainerID[16]; /* 128-bit number */
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CONTN_ID_SIZE 20
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
- * each endpoint descriptor for a wireless device
- */
-struct usb_wireless_ep_comp_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bMaxBurst;
- __u8 bMaxSequence;
- __le16 wMaxStreamDelay;
- __le16 wOverTheAirPacketSize;
- __u8 bOverTheAirInterval;
- __u8 bmCompAttributes;
-#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
-#define USB_ENDPOINT_SWITCH_NO 0
-#define USB_ENDPOINT_SWITCH_SWITCH 1
-#define USB_ENDPOINT_SWITCH_SCALE 2
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
- * host and a device for connection set up, mutual authentication, and
- * exchanging short lived session keys. The handshake depends on a CC.
- */
-struct usb_handshake {
- __u8 bMessageNumber;
- __u8 bStatus;
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 CDID[16];
- __u8 nonce[16];
- __u8 MIC[8];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
- * A CC may also be set up using non-wireless secure channels (including
- * wired USB!), and some devices may support CCs with multiple hosts.
- */
-struct usb_connection_context {
- __u8 CHID[16]; /* persistent host id */
- __u8 CDID[16]; /* device id (unique w/in host context) */
- __u8 CK[16]; /* connection key */
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
+#include <uapi/linux/usb/ch9.h>
-/* USB 2.0 defines three speeds, here's how Linux identifies them */
-
-enum usb_device_speed {
- USB_SPEED_UNKNOWN = 0, /* enumerating */
- USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
- USB_SPEED_HIGH, /* usb 2.0 */
- USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
- USB_SPEED_SUPER, /* usb 3.0 */
-};
-
-#ifdef __KERNEL__
/**
* usb_speed_string() - Returns human readable-name of the speed.
@@ -919,86 +43,4 @@ enum usb_device_speed {
*/
extern const char *usb_speed_string(enum usb_device_speed speed);
-#endif
-
-enum usb_device_state {
- /* NOTATTACHED isn't in the USB spec, and this state acts
- * the same as ATTACHED ... but it's clearer this way.
- */
- USB_STATE_NOTATTACHED = 0,
-
- /* chapter 9 and authentication (wireless) device states */
- USB_STATE_ATTACHED,
- USB_STATE_POWERED, /* wired */
- USB_STATE_RECONNECTING, /* auth */
- USB_STATE_UNAUTHENTICATED, /* auth */
- USB_STATE_DEFAULT, /* limited function */
- USB_STATE_ADDRESS,
- USB_STATE_CONFIGURED, /* most functions */
-
- USB_STATE_SUSPENDED
-
- /* NOTE: there are actually four different SUSPENDED
- * states, returning to POWERED, DEFAULT, ADDRESS, or
- * CONFIGURED respectively when SOF tokens flow again.
- * At this level there's no difference between L1 and L2
- * suspend states. (L2 being original USB 1.1 suspend.)
- */
-};
-
-enum usb3_link_state {
- USB3_LPM_U0 = 0,
- USB3_LPM_U1,
- USB3_LPM_U2,
- USB3_LPM_U3
-};
-
-/*
- * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
- * 0xff means the parent hub will accept transitions to U1, but will not
- * initiate a transition.
- *
- * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
- * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
- * values.
- *
- * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
- * 0xff means the parent hub will accept transitions to U2, but will not
- * initiate a transition.
- *
- * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
- * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
- * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
- * 65.024ms.
- */
-#define USB3_LPM_DISABLED 0x0
-#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
-#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
-#define USB3_LPM_DEVICE_INITIATED 0xFF
-
-struct usb_set_sel_req {
- __u8 u1_sel;
- __u8 u1_pel;
- __le16 u2_sel;
- __le16 u2_pel;
-} __attribute__ ((packed));
-
-/*
- * The Set System Exit Latency control transfer provides one byte each for
- * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
- * are two bytes long.
- */
-#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
-#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * As per USB compliance update, a device that is actively drawing
- * more than 100mA from USB must report itself as bus-powered in
- * the GetStatus(DEVICE) call.
- * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
- */
-#define USB_SELF_POWER_VBUS_MAX_DRAW 100
-
#endif /* __LINUX_USB_CH9_H */
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
index a843d0851364..65d0a88dbc67 100644
--- a/include/linux/usb/functionfs.h
+++ b/include/linux/usb/functionfs.h
@@ -1,171 +1,8 @@
#ifndef __LINUX_FUNCTIONFS_H__
#define __LINUX_FUNCTIONFS_H__ 1
+#include <uapi/linux/usb/functionfs.h>
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#include <linux/usb/ch9.h>
-
-
-enum {
- FUNCTIONFS_DESCRIPTORS_MAGIC = 1,
- FUNCTIONFS_STRINGS_MAGIC = 2
-};
-
-
-#ifndef __KERNEL__
-
-/* Descriptor of an non-audio endpoint */
-struct usb_endpoint_descriptor_no_audio {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEndpointAddress;
- __u8 bmAttributes;
- __le16 wMaxPacketSize;
- __u8 bInterval;
-} __attribute__((packed));
-
-
-/*
- * All numbers must be in little endian order.
- */
-
-struct usb_functionfs_descs_head {
- __le32 magic;
- __le32 length;
- __le32 fs_count;
- __le32 hs_count;
-} __attribute__((packed));
-
-/*
- * Descriptors format:
- *
- * | off | name | type | description |
- * |-----+-----------+--------------+--------------------------------------|
- * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
- * | 4 | length | LE32 | length of the whole data chunk |
- * | 8 | fs_count | LE32 | number of full-speed descriptors |
- * | 12 | hs_count | LE32 | number of high-speed descriptors |
- * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors |
- * | | hs_descrs | Descriptor[] | list of high-speed descriptors |
- *
- * descs are just valid USB descriptors and have the following format:
- *
- * | off | name | type | description |
- * |-----+-----------------+------+--------------------------|
- * | 0 | bLength | U8 | length of the descriptor |
- * | 1 | bDescriptorType | U8 | descriptor type |
- * | 2 | payload | | descriptor's payload |
- */
-
-struct usb_functionfs_strings_head {
- __le32 magic;
- __le32 length;
- __le32 str_count;
- __le32 lang_count;
-} __attribute__((packed));
-
-/*
- * Strings format:
- *
- * | off | name | type | description |
- * |-----+------------+-----------------------+----------------------------|
- * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC |
- * | 4 | length | LE32 | length of the data chunk |
- * | 8 | str_count | LE32 | number of strings |
- * | 12 | lang_count | LE32 | number of languages |
- * | 16 | stringtab | StringTab[lang_count] | table of strings per lang |
- *
- * For each language there is one stringtab entry (ie. there are lang_count
- * stringtab entires). Each StringTab has following format:
- *
- * | off | name | type | description |
- * |-----+---------+-------------------+------------------------------------|
- * | 0 | lang | LE16 | language code |
- * | 2 | strings | String[str_count] | array of strings in given language |
- *
- * For each string there is one strings entry (ie. there are str_count
- * string entries). Each String is a NUL terminated string encoded in
- * UTF-8.
- */
-
-#endif
-
-
-/*
- * Events are delivered on the ep0 file descriptor, when the user mode driver
- * reads from this file descriptor after writing the descriptors. Don't
- * stop polling this descriptor.
- */
-
-enum usb_functionfs_event_type {
- FUNCTIONFS_BIND,
- FUNCTIONFS_UNBIND,
-
- FUNCTIONFS_ENABLE,
- FUNCTIONFS_DISABLE,
-
- FUNCTIONFS_SETUP,
-
- FUNCTIONFS_SUSPEND,
- FUNCTIONFS_RESUME
-};
-
-/* NOTE: this structure must stay the same size and layout on
- * both 32-bit and 64-bit kernels.
- */
-struct usb_functionfs_event {
- union {
- /* SETUP: packet; DATA phase i/o precedes next event
- *(setup.bmRequestType & USB_DIR_IN) flags direction */
- struct usb_ctrlrequest setup;
- } __attribute__((packed)) u;
-
- /* enum usb_functionfs_event_type */
- __u8 type;
- __u8 _pad[3];
-} __attribute__((packed));
-
-
-/* Endpoint ioctls */
-/* The same as in gadgetfs */
-
-/* IN transfers may be reported to the gadget driver as complete
- * when the fifo is loaded, before the host reads the data;
- * OUT transfers may be reported to the host's "client" driver as
- * complete when they're sitting in the FIFO unread.
- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
- * (needed for precise fault handling, when the hardware allows it)
- */
-#define FUNCTIONFS_FIFO_STATUS _IO('g', 1)
-
-/* discards any unclaimed data in the fifo. */
-#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2)
-
-/* resets endpoint halt+toggle; used to implement set_interface.
- * some hardware (like pxa2xx) can't support this.
- */
-#define FUNCTIONFS_CLEAR_HALT _IO('g', 3)
-
-/* Specific for functionfs */
-
-/*
- * Returns reverse mapping of an interface. Called on EP0. If there
- * is no such interface returns -EDOM. If function is not active
- * returns -ENODEV.
- */
-#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128)
-
-/*
- * Returns real bEndpointAddress of an endpoint. If function is not
- * active returns -ENODEV.
- */
-#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129)
-
-
-#ifdef __KERNEL__
struct ffs_data;
struct usb_composite_dev;
@@ -197,5 +34,3 @@ static void functionfs_release_dev_callback(struct ffs_data *ffs_data)
#endif
-
-#endif
diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/linux/wimax/Kbuild
+++ /dev/null
diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/mtd/Kbuild
+++ /dev/null
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1b4989082244..f8cd4cf3fad8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1218,6 +1218,7 @@ struct cfg80211_deauth_request {
const u8 *ie;
size_t ie_len;
u16 reason_code;
+ bool local_state_change;
};
/**
diff --git a/include/uapi/asm-generic/kvm_para.h b/include/uapi/asm-generic/kvm_para.h
index e69de29bb2d1..486f0af73c39 100644
--- a/include/uapi/asm-generic/kvm_para.h
+++ b/include/uapi/asm-generic/kvm_para.h
@@ -0,0 +1,4 @@
+/*
+ * There isn't anything here, but the file must not be empty or patch
+ * will delete it.
+ */
diff --git a/include/uapi/linux/dvb/Kbuild b/include/uapi/linux/dvb/Kbuild
index aafaa5aa54d4..d40942cfc627 100644
--- a/include/uapi/linux/dvb/Kbuild
+++ b/include/uapi/linux/dvb/Kbuild
@@ -1 +1,9 @@
# UAPI Header export list
+header-y += audio.h
+header-y += ca.h
+header-y += dmx.h
+header-y += frontend.h
+header-y += net.h
+header-y += osd.h
+header-y += version.h
+header-y += video.h
diff --git a/include/linux/dvb/audio.h b/include/uapi/linux/dvb/audio.h
index d47bccd604e4..d47bccd604e4 100644
--- a/include/linux/dvb/audio.h
+++ b/include/uapi/linux/dvb/audio.h
diff --git a/include/linux/dvb/ca.h b/include/uapi/linux/dvb/ca.h
index c18537f3e449..c18537f3e449 100644
--- a/include/linux/dvb/ca.h
+++ b/include/uapi/linux/dvb/ca.h
diff --git a/include/uapi/linux/dvb/dmx.h b/include/uapi/linux/dvb/dmx.h
new file mode 100644
index 000000000000..b2a9ad8cafdc
--- /dev/null
+++ b/include/uapi/linux/dvb/dmx.h
@@ -0,0 +1,155 @@
+/*
+ * dmx.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ * & Ralph Metzler <ralph@convergence.de>
+ * for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _UAPI_DVBDMX_H_
+#define _UAPI_DVBDMX_H_
+
+#include <linux/types.h>
+#ifndef __KERNEL__
+#include <time.h>
+#endif
+
+
+#define DMX_FILTER_SIZE 16
+
+typedef enum
+{
+ DMX_OUT_DECODER, /* Streaming directly to decoder. */
+ DMX_OUT_TAP, /* Output going to a memory buffer */
+ /* (to be retrieved via the read command).*/
+ DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */
+ /* (to be retrieved by reading from the */
+ /* logical DVR device). */
+ DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */
+} dmx_output_t;
+
+
+typedef enum
+{
+ DMX_IN_FRONTEND, /* Input from a front-end device. */
+ DMX_IN_DVR /* Input from the logical DVR device. */
+} dmx_input_t;
+
+
+typedef enum
+{
+ DMX_PES_AUDIO0,
+ DMX_PES_VIDEO0,
+ DMX_PES_TELETEXT0,
+ DMX_PES_SUBTITLE0,
+ DMX_PES_PCR0,
+
+ DMX_PES_AUDIO1,
+ DMX_PES_VIDEO1,
+ DMX_PES_TELETEXT1,
+ DMX_PES_SUBTITLE1,
+ DMX_PES_PCR1,
+
+ DMX_PES_AUDIO2,
+ DMX_PES_VIDEO2,
+ DMX_PES_TELETEXT2,
+ DMX_PES_SUBTITLE2,
+ DMX_PES_PCR2,
+
+ DMX_PES_AUDIO3,
+ DMX_PES_VIDEO3,
+ DMX_PES_TELETEXT3,
+ DMX_PES_SUBTITLE3,
+ DMX_PES_PCR3,
+
+ DMX_PES_OTHER
+} dmx_pes_type_t;
+
+#define DMX_PES_AUDIO DMX_PES_AUDIO0
+#define DMX_PES_VIDEO DMX_PES_VIDEO0
+#define DMX_PES_TELETEXT DMX_PES_TELETEXT0
+#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0
+#define DMX_PES_PCR DMX_PES_PCR0
+
+
+typedef struct dmx_filter
+{
+ __u8 filter[DMX_FILTER_SIZE];
+ __u8 mask[DMX_FILTER_SIZE];
+ __u8 mode[DMX_FILTER_SIZE];
+} dmx_filter_t;
+
+
+struct dmx_sct_filter_params
+{
+ __u16 pid;
+ dmx_filter_t filter;
+ __u32 timeout;
+ __u32 flags;
+#define DMX_CHECK_CRC 1
+#define DMX_ONESHOT 2
+#define DMX_IMMEDIATE_START 4
+#define DMX_KERNEL_CLIENT 0x8000
+};
+
+
+struct dmx_pes_filter_params
+{
+ __u16 pid;
+ dmx_input_t input;
+ dmx_output_t output;
+ dmx_pes_type_t pes_type;
+ __u32 flags;
+};
+
+typedef struct dmx_caps {
+ __u32 caps;
+ int num_decoders;
+} dmx_caps_t;
+
+typedef enum {
+ DMX_SOURCE_FRONT0 = 0,
+ DMX_SOURCE_FRONT1,
+ DMX_SOURCE_FRONT2,
+ DMX_SOURCE_FRONT3,
+ DMX_SOURCE_DVR0 = 16,
+ DMX_SOURCE_DVR1,
+ DMX_SOURCE_DVR2,
+ DMX_SOURCE_DVR3
+} dmx_source_t;
+
+struct dmx_stc {
+ unsigned int num; /* input : which STC? 0..N */
+ unsigned int base; /* output: divisor for stc to get 90 kHz clock */
+ __u64 stc; /* output: stc in 'base'*90 kHz units */
+};
+
+
+#define DMX_START _IO('o', 41)
+#define DMX_STOP _IO('o', 42)
+#define DMX_SET_FILTER _IOW('o', 43, struct dmx_sct_filter_params)
+#define DMX_SET_PES_FILTER _IOW('o', 44, struct dmx_pes_filter_params)
+#define DMX_SET_BUFFER_SIZE _IO('o', 45)
+#define DMX_GET_PES_PIDS _IOR('o', 47, __u16[5])
+#define DMX_GET_CAPS _IOR('o', 48, dmx_caps_t)
+#define DMX_SET_SOURCE _IOW('o', 49, dmx_source_t)
+#define DMX_GET_STC _IOWR('o', 50, struct dmx_stc)
+#define DMX_ADD_PID _IOW('o', 51, __u16)
+#define DMX_REMOVE_PID _IOW('o', 52, __u16)
+
+#endif /* _UAPI_DVBDMX_H_ */
diff --git a/include/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h
index c12d452cb40d..c12d452cb40d 100644
--- a/include/linux/dvb/frontend.h
+++ b/include/uapi/linux/dvb/frontend.h
diff --git a/include/linux/dvb/net.h b/include/uapi/linux/dvb/net.h
index f451e7eb0b0b..f451e7eb0b0b 100644
--- a/include/linux/dvb/net.h
+++ b/include/uapi/linux/dvb/net.h
diff --git a/include/linux/dvb/osd.h b/include/uapi/linux/dvb/osd.h
index 880e68435832..880e68435832 100644
--- a/include/linux/dvb/osd.h
+++ b/include/uapi/linux/dvb/osd.h
diff --git a/include/linux/dvb/version.h b/include/uapi/linux/dvb/version.h
index 827cce7e33e3..827cce7e33e3 100644
--- a/include/linux/dvb/version.h
+++ b/include/uapi/linux/dvb/version.h
diff --git a/include/uapi/linux/dvb/video.h b/include/uapi/linux/dvb/video.h
new file mode 100644
index 000000000000..d3d14a59d2d5
--- /dev/null
+++ b/include/uapi/linux/dvb/video.h
@@ -0,0 +1,274 @@
+/*
+ * video.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ * & Ralph Metzler <ralph@convergence.de>
+ * for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _UAPI_DVBVIDEO_H_
+#define _UAPI_DVBVIDEO_H_
+
+#include <linux/types.h>
+#ifndef __KERNEL__
+#include <stdint.h>
+#include <time.h>
+#endif
+
+typedef enum {
+ VIDEO_FORMAT_4_3, /* Select 4:3 format */
+ VIDEO_FORMAT_16_9, /* Select 16:9 format. */
+ VIDEO_FORMAT_221_1 /* 2.21:1 */
+} video_format_t;
+
+
+typedef enum {
+ VIDEO_SYSTEM_PAL,
+ VIDEO_SYSTEM_NTSC,
+ VIDEO_SYSTEM_PALN,
+ VIDEO_SYSTEM_PALNc,
+ VIDEO_SYSTEM_PALM,
+ VIDEO_SYSTEM_NTSC60,
+ VIDEO_SYSTEM_PAL60,
+ VIDEO_SYSTEM_PALM60
+} video_system_t;
+
+
+typedef enum {
+ VIDEO_PAN_SCAN, /* use pan and scan format */
+ VIDEO_LETTER_BOX, /* use letterbox format */
+ VIDEO_CENTER_CUT_OUT /* use center cut out format */
+} video_displayformat_t;
+
+typedef struct {
+ int w;
+ int h;
+ video_format_t aspect_ratio;
+} video_size_t;
+
+typedef enum {
+ VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
+ VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
+ comes from the user through the write
+ system call */
+} video_stream_source_t;
+
+
+typedef enum {
+ VIDEO_STOPPED, /* Video is stopped */
+ VIDEO_PLAYING, /* Video is currently playing */
+ VIDEO_FREEZED /* Video is freezed */
+} video_play_state_t;
+
+
+/* Decoder commands */
+#define VIDEO_CMD_PLAY (0)
+#define VIDEO_CMD_STOP (1)
+#define VIDEO_CMD_FREEZE (2)
+#define VIDEO_CMD_CONTINUE (3)
+
+/* Flags for VIDEO_CMD_FREEZE */
+#define VIDEO_CMD_FREEZE_TO_BLACK (1 << 0)
+
+/* Flags for VIDEO_CMD_STOP */
+#define VIDEO_CMD_STOP_TO_BLACK (1 << 0)
+#define VIDEO_CMD_STOP_IMMEDIATELY (1 << 1)
+
+/* Play input formats: */
+/* The decoder has no special format requirements */
+#define VIDEO_PLAY_FMT_NONE (0)
+/* The decoder requires full GOPs */
+#define VIDEO_PLAY_FMT_GOP (1)
+
+/* The structure must be zeroed before use by the application
+ This ensures it can be extended safely in the future. */
+struct video_command {
+ __u32 cmd;
+ __u32 flags;
+ union {
+ struct {
+ __u64 pts;
+ } stop;
+
+ struct {
+ /* 0 or 1000 specifies normal speed,
+ 1 specifies forward single stepping,
+ -1 specifies backward single stepping,
+ >1: playback at speed/1000 of the normal speed,
+ <-1: reverse playback at (-speed/1000) of the normal speed. */
+ __s32 speed;
+ __u32 format;
+ } play;
+
+ struct {
+ __u32 data[16];
+ } raw;
+ };
+};
+
+/* FIELD_UNKNOWN can be used if the hardware does not know whether
+ the Vsync is for an odd, even or progressive (i.e. non-interlaced)
+ field. */
+#define VIDEO_VSYNC_FIELD_UNKNOWN (0)
+#define VIDEO_VSYNC_FIELD_ODD (1)
+#define VIDEO_VSYNC_FIELD_EVEN (2)
+#define VIDEO_VSYNC_FIELD_PROGRESSIVE (3)
+
+struct video_event {
+ __s32 type;
+#define VIDEO_EVENT_SIZE_CHANGED 1
+#define VIDEO_EVENT_FRAME_RATE_CHANGED 2
+#define VIDEO_EVENT_DECODER_STOPPED 3
+#define VIDEO_EVENT_VSYNC 4
+ __kernel_time_t timestamp;
+ union {
+ video_size_t size;
+ unsigned int frame_rate; /* in frames per 1000sec */
+ unsigned char vsync_field; /* unknown/odd/even/progressive */
+ } u;
+};
+
+
+struct video_status {
+ int video_blank; /* blank video on freeze? */
+ video_play_state_t play_state; /* current state of playback */
+ video_stream_source_t stream_source; /* current source (demux/memory) */
+ video_format_t video_format; /* current aspect ratio of stream*/
+ video_displayformat_t display_format;/* selected cropping mode */
+};
+
+
+struct video_still_picture {
+ char __user *iFrame; /* pointer to a single iframe in memory */
+ __s32 size;
+};
+
+
+typedef
+struct video_highlight {
+ int active; /* 1=show highlight, 0=hide highlight */
+ __u8 contrast1; /* 7- 4 Pattern pixel contrast */
+ /* 3- 0 Background pixel contrast */
+ __u8 contrast2; /* 7- 4 Emphasis pixel-2 contrast */
+ /* 3- 0 Emphasis pixel-1 contrast */
+ __u8 color1; /* 7- 4 Pattern pixel color */
+ /* 3- 0 Background pixel color */
+ __u8 color2; /* 7- 4 Emphasis pixel-2 color */
+ /* 3- 0 Emphasis pixel-1 color */
+ __u32 ypos; /* 23-22 auto action mode */
+ /* 21-12 start y */
+ /* 9- 0 end y */
+ __u32 xpos; /* 23-22 button color number */
+ /* 21-12 start x */
+ /* 9- 0 end x */
+} video_highlight_t;
+
+
+typedef struct video_spu {
+ int active;
+ int stream_id;
+} video_spu_t;
+
+
+typedef struct video_spu_palette { /* SPU Palette information */
+ int length;
+ __u8 __user *palette;
+} video_spu_palette_t;
+
+
+typedef struct video_navi_pack {
+ int length; /* 0 ... 1024 */
+ __u8 data[1024];
+} video_navi_pack_t;
+
+
+typedef __u16 video_attributes_t;
+/* bits: descr. */
+/* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */
+/* 13-12 TV system (0=525/60, 1=625/50) */
+/* 11-10 Aspect ratio (0=4:3, 3=16:9) */
+/* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */
+/* 7 line 21-1 data present in GOP (1=yes, 0=no) */
+/* 6 line 21-2 data present in GOP (1=yes, 0=no) */
+/* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */
+/* 2 source letterboxed (1=yes, 0=no) */
+/* 0 film/camera mode (0=camera, 1=film (625/50 only)) */
+
+
+/* bit definitions for capabilities: */
+/* can the hardware decode MPEG1 and/or MPEG2? */
+#define VIDEO_CAP_MPEG1 1
+#define VIDEO_CAP_MPEG2 2
+/* can you send a system and/or program stream to video device?
+ (you still have to open the video and the audio device but only
+ send the stream to the video device) */
+#define VIDEO_CAP_SYS 4
+#define VIDEO_CAP_PROG 8
+/* can the driver also handle SPU, NAVI and CSS encoded data?
+ (CSS API is not present yet) */
+#define VIDEO_CAP_SPU 16
+#define VIDEO_CAP_NAVI 32
+#define VIDEO_CAP_CSS 64
+
+
+#define VIDEO_STOP _IO('o', 21)
+#define VIDEO_PLAY _IO('o', 22)
+#define VIDEO_FREEZE _IO('o', 23)
+#define VIDEO_CONTINUE _IO('o', 24)
+#define VIDEO_SELECT_SOURCE _IO('o', 25)
+#define VIDEO_SET_BLANK _IO('o', 26)
+#define VIDEO_GET_STATUS _IOR('o', 27, struct video_status)
+#define VIDEO_GET_EVENT _IOR('o', 28, struct video_event)
+#define VIDEO_SET_DISPLAY_FORMAT _IO('o', 29)
+#define VIDEO_STILLPICTURE _IOW('o', 30, struct video_still_picture)
+#define VIDEO_FAST_FORWARD _IO('o', 31)
+#define VIDEO_SLOWMOTION _IO('o', 32)
+#define VIDEO_GET_CAPABILITIES _IOR('o', 33, unsigned int)
+#define VIDEO_CLEAR_BUFFER _IO('o', 34)
+#define VIDEO_SET_ID _IO('o', 35)
+#define VIDEO_SET_STREAMTYPE _IO('o', 36)
+#define VIDEO_SET_FORMAT _IO('o', 37)
+#define VIDEO_SET_SYSTEM _IO('o', 38)
+#define VIDEO_SET_HIGHLIGHT _IOW('o', 39, video_highlight_t)
+#define VIDEO_SET_SPU _IOW('o', 50, video_spu_t)
+#define VIDEO_SET_SPU_PALETTE _IOW('o', 51, video_spu_palette_t)
+#define VIDEO_GET_NAVI _IOR('o', 52, video_navi_pack_t)
+#define VIDEO_SET_ATTRIBUTES _IO('o', 53)
+#define VIDEO_GET_SIZE _IOR('o', 55, video_size_t)
+#define VIDEO_GET_FRAME_RATE _IOR('o', 56, unsigned int)
+
+/**
+ * VIDEO_GET_PTS
+ *
+ * Read the 33 bit presentation time stamp as defined
+ * in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
+ *
+ * The PTS should belong to the currently played
+ * frame if possible, but may also be a value close to it
+ * like the PTS of the last decoded frame or the last PTS
+ * extracted by the PES parser.
+ */
+#define VIDEO_GET_PTS _IOR('o', 57, __u64)
+
+/* Read the number of displayed frames since the decoder was started */
+#define VIDEO_GET_FRAME_COUNT _IOR('o', 58, __u64)
+
+#define VIDEO_COMMAND _IOWR('o', 59, struct video_command)
+#define VIDEO_TRY_COMMAND _IOWR('o', 60, struct video_command)
+
+#endif /* _UAPI_DVBVIDEO_H_ */
diff --git a/include/uapi/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h
index 1065078938f9..3921e33aec8e 100644
--- a/include/uapi/linux/elf-fdpic.h
+++ b/include/uapi/linux/elf-fdpic.h
@@ -9,8 +9,8 @@
* 2 of the License, or (at your option) any later version.
*/
-#ifndef _LINUX_ELF_FDPIC_H
-#define _LINUX_ELF_FDPIC_H
+#ifndef _UAPI_LINUX_ELF_FDPIC_H
+#define _UAPI_LINUX_ELF_FDPIC_H
#include <linux/elf.h>
@@ -31,40 +31,4 @@ struct elf32_fdpic_loadmap {
#define ELF32_FDPIC_LOADMAP_VERSION 0x0000
-#ifndef __KERNEL__
-/*
- * binfmt binary parameters structure
- */
-struct elf_fdpic_params {
- struct elfhdr hdr; /* ref copy of ELF header */
- struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */
- struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */
- unsigned long elfhdr_addr; /* mapped ELF header user address */
- unsigned long ph_addr; /* mapped PT_PHDR user address */
- unsigned long map_addr; /* mapped loadmap user address */
- unsigned long entry_addr; /* mapped entry user address */
- unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */
- unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */
- unsigned long load_addr; /* user address at which to map binary */
- unsigned long flags;
-#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */
-#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */
-#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */
-#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant
- * displacement */
-#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */
-#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */
-#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */
-#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */
-#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */
-};
-
-#ifdef CONFIG_MMU
-extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
- struct elf_fdpic_params *interp_params,
- unsigned long *start_stack,
- unsigned long *start_brk);
-#endif
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_ELF_FDPIC_H */
+#endif /* _UAPI_LINUX_ELF_FDPIC_H */
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index 9fcc880d4be2..780d4c6093eb 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -57,85 +57,6 @@ struct inodes_stat_t {
#define NR_FILE 8192 /* this can well be larger on a larger system */
-#define MAY_EXEC 0x00000001
-#define MAY_WRITE 0x00000002
-#define MAY_READ 0x00000004
-#define MAY_APPEND 0x00000008
-#define MAY_ACCESS 0x00000010
-#define MAY_OPEN 0x00000020
-#define MAY_CHDIR 0x00000040
-/* called from RCU mode, don't block */
-#define MAY_NOT_BLOCK 0x00000080
-
-/*
- * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond
- * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
- */
-
-/* file is open for reading */
-#define FMODE_READ ((__force fmode_t)0x1)
-/* file is open for writing */
-#define FMODE_WRITE ((__force fmode_t)0x2)
-/* file is seekable */
-#define FMODE_LSEEK ((__force fmode_t)0x4)
-/* file can be accessed using pread */
-#define FMODE_PREAD ((__force fmode_t)0x8)
-/* file can be accessed using pwrite */
-#define FMODE_PWRITE ((__force fmode_t)0x10)
-/* File is opened for execution with sys_execve / sys_uselib */
-#define FMODE_EXEC ((__force fmode_t)0x20)
-/* File is opened with O_NDELAY (only set for block devices) */
-#define FMODE_NDELAY ((__force fmode_t)0x40)
-/* File is opened with O_EXCL (only set for block devices) */
-#define FMODE_EXCL ((__force fmode_t)0x80)
-/* File is opened using open(.., 3, ..) and is writeable only for ioctls
- (specialy hack for floppy.c) */
-#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100)
-/* 32bit hashes as llseek() offset (for directories) */
-#define FMODE_32BITHASH ((__force fmode_t)0x200)
-/* 64bit hashes as llseek() offset (for directories) */
-#define FMODE_64BITHASH ((__force fmode_t)0x400)
-
-/*
- * Don't update ctime and mtime.
- *
- * Currently a special hack for the XFS open_by_handle ioctl, but we'll
- * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
- */
-#define FMODE_NOCMTIME ((__force fmode_t)0x800)
-
-/* Expect random access pattern */
-#define FMODE_RANDOM ((__force fmode_t)0x1000)
-
-/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
-#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000)
-
-/* File is opened with O_PATH; almost nothing can be done with it */
-#define FMODE_PATH ((__force fmode_t)0x4000)
-
-/* File was opened by fanotify and shouldn't generate fanotify events */
-#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
-
-/*
- * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
- * that indicates that they should check the contents of the iovec are
- * valid, but not check the memory that the iovec elements
- * points too.
- */
-#define CHECK_IOVEC_ONLY -1
-
-#define SEL_IN 1
-#define SEL_OUT 2
-#define SEL_EX 4
-
-/* public flags for file_system_type */
-#define FS_REQUIRES_DEV 1
-#define FS_BINARY_MOUNTDATA 2
-#define FS_HAS_SUBTYPE 4
-#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */
-#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move()
- * during rename() internally.
- */
/*
* These are the fs-independent mount-flags: up to 32 flags are supported
@@ -181,59 +102,6 @@ struct inodes_stat_t {
#define MS_MGC_VAL 0xC0ED0000
#define MS_MGC_MSK 0xffff0000
-/* Inode flags - they have nothing to superblock flags now */
-
-#define S_SYNC 1 /* Writes are synced at once */
-#define S_NOATIME 2 /* Do not update access times */
-#define S_APPEND 4 /* Append-only file */
-#define S_IMMUTABLE 8 /* Immutable file */
-#define S_DEAD 16 /* removed, but still open directory */
-#define S_NOQUOTA 32 /* Inode is not counted to quota */
-#define S_DIRSYNC 64 /* Directory modifications are synchronous */
-#define S_NOCMTIME 128 /* Do not update file c/mtime */
-#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */
-#define S_PRIVATE 512 /* Inode is fs-internal */
-#define S_IMA 1024 /* Inode has an associated IMA struct */
-#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */
-#define S_NOSEC 4096 /* no suid or xattr security attributes */
-
-/*
- * Note that nosuid etc flags are inode-specific: setting some file-system
- * flags just means all the inodes inherit those flags by default. It might be
- * possible to override it selectively if you really wanted to with some
- * ioctl() that is not currently implemented.
- *
- * Exception: MS_RDONLY is always applied to the entire file system.
- *
- * Unfortunately, it is possible to change a filesystems flags with it mounted
- * with files in use. This means that all of the inodes will not have their
- * i_flags updated. Hence, i_flags no longer inherit the superblock mount
- * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
- */
-#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
-
-#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
-#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \
- ((inode)->i_flags & S_SYNC))
-#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
- ((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
-#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK)
-#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
-#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION)
-
-#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA)
-#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND)
-#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE)
-#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL)
-
-#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD)
-#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME)
-#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE)
-#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE)
-#define IS_IMA(inode) ((inode)->i_flags & S_IMA)
-#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT)
-#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC)
-
/* the read-only stuff doesn't really belong here, but any other place is
probably as bad and I don't want to create yet another include file. */
diff --git a/include/uapi/linux/hsi/Kbuild b/include/uapi/linux/hsi/Kbuild
index aafaa5aa54d4..30ab3cd3b8a5 100644
--- a/include/uapi/linux/hsi/Kbuild
+++ b/include/uapi/linux/hsi/Kbuild
@@ -1 +1,2 @@
# UAPI Header export list
+header-y += hsi_char.h
diff --git a/include/linux/hsi/hsi_char.h b/include/uapi/linux/hsi/hsi_char.h
index 76160b4f455d..76160b4f455d 100644
--- a/include/linux/hsi/hsi_char.h
+++ b/include/uapi/linux/hsi/hsi_char.h
diff --git a/include/uapi/linux/irqnr.h b/include/uapi/linux/irqnr.h
index e69de29bb2d1..ae5704fa77ad 100644
--- a/include/uapi/linux/irqnr.h
+++ b/include/uapi/linux/irqnr.h
@@ -0,0 +1,4 @@
+/*
+ * There isn't anything here anymore, but the file must not be empty or patch
+ * will delete it.
+ */
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
index c4b89a5cb7df..e962faa5ab0d 100644
--- a/include/uapi/linux/tcp.h
+++ b/include/uapi/linux/tcp.h
@@ -130,6 +130,7 @@ enum {
#define TCPI_OPT_WSCALE 4
#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */
#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */
+#define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */
enum tcp_ca_state {
TCP_CA_Open = 0,
diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild
index aafaa5aa54d4..6cb4ea826834 100644
--- a/include/uapi/linux/usb/Kbuild
+++ b/include/uapi/linux/usb/Kbuild
@@ -1 +1,11 @@
# UAPI Header export list
+header-y += audio.h
+header-y += cdc.h
+header-y += ch11.h
+header-y += ch9.h
+header-y += functionfs.h
+header-y += g_printer.h
+header-y += gadgetfs.h
+header-y += midi.h
+header-y += tmc.h
+header-y += video.h
diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h
new file mode 100644
index 000000000000..ac90037894d9
--- /dev/null
+++ b/include/uapi/linux/usb/audio.h
@@ -0,0 +1,545 @@
+/*
+ * <linux/usb/audio.h> -- USB Audio definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for Audio Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/audio10.pdf
+ *
+ * Types and defines in this file are either specific to version 1.0 of
+ * this standard or common for newer versions.
+ */
+
+#ifndef _UAPI__LINUX_USB_AUDIO_H
+#define _UAPI__LINUX_USB_AUDIO_H
+
+#include <linux/types.h>
+
+/* bInterfaceProtocol values to denote the version of the standard used */
+#define UAC_VERSION_1 0x00
+#define UAC_VERSION_2 0x20
+
+/* A.2 Audio Interface Subclass Codes */
+#define USB_SUBCLASS_AUDIOCONTROL 0x01
+#define USB_SUBCLASS_AUDIOSTREAMING 0x02
+#define USB_SUBCLASS_MIDISTREAMING 0x03
+
+/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */
+#define UAC_HEADER 0x01
+#define UAC_INPUT_TERMINAL 0x02
+#define UAC_OUTPUT_TERMINAL 0x03
+#define UAC_MIXER_UNIT 0x04
+#define UAC_SELECTOR_UNIT 0x05
+#define UAC_FEATURE_UNIT 0x06
+#define UAC1_PROCESSING_UNIT 0x07
+#define UAC1_EXTENSION_UNIT 0x08
+
+/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
+#define UAC_AS_GENERAL 0x01
+#define UAC_FORMAT_TYPE 0x02
+#define UAC_FORMAT_SPECIFIC 0x03
+
+/* A.7 Processing Unit Process Types */
+#define UAC_PROCESS_UNDEFINED 0x00
+#define UAC_PROCESS_UP_DOWNMIX 0x01
+#define UAC_PROCESS_DOLBY_PROLOGIC 0x02
+#define UAC_PROCESS_STEREO_EXTENDER 0x03
+#define UAC_PROCESS_REVERB 0x04
+#define UAC_PROCESS_CHORUS 0x05
+#define UAC_PROCESS_DYN_RANGE_COMP 0x06
+
+/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
+#define UAC_EP_GENERAL 0x01
+
+/* A.9 Audio Class-Specific Request Codes */
+#define UAC_SET_ 0x00
+#define UAC_GET_ 0x80
+
+#define UAC__CUR 0x1
+#define UAC__MIN 0x2
+#define UAC__MAX 0x3
+#define UAC__RES 0x4
+#define UAC__MEM 0x5
+
+#define UAC_SET_CUR (UAC_SET_ | UAC__CUR)
+#define UAC_GET_CUR (UAC_GET_ | UAC__CUR)
+#define UAC_SET_MIN (UAC_SET_ | UAC__MIN)
+#define UAC_GET_MIN (UAC_GET_ | UAC__MIN)
+#define UAC_SET_MAX (UAC_SET_ | UAC__MAX)
+#define UAC_GET_MAX (UAC_GET_ | UAC__MAX)
+#define UAC_SET_RES (UAC_SET_ | UAC__RES)
+#define UAC_GET_RES (UAC_GET_ | UAC__RES)
+#define UAC_SET_MEM (UAC_SET_ | UAC__MEM)
+#define UAC_GET_MEM (UAC_GET_ | UAC__MEM)
+
+#define UAC_GET_STAT 0xff
+
+/* A.10 Control Selector Codes */
+
+/* A.10.1 Terminal Control Selectors */
+#define UAC_TERM_COPY_PROTECT 0x01
+
+/* A.10.2 Feature Unit Control Selectors */
+#define UAC_FU_MUTE 0x01
+#define UAC_FU_VOLUME 0x02
+#define UAC_FU_BASS 0x03
+#define UAC_FU_MID 0x04
+#define UAC_FU_TREBLE 0x05
+#define UAC_FU_GRAPHIC_EQUALIZER 0x06
+#define UAC_FU_AUTOMATIC_GAIN 0x07
+#define UAC_FU_DELAY 0x08
+#define UAC_FU_BASS_BOOST 0x09
+#define UAC_FU_LOUDNESS 0x0a
+
+#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1))
+
+/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
+#define UAC_UD_ENABLE 0x01
+#define UAC_UD_MODE_SELECT 0x02
+
+/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
+#define UAC_DP_ENABLE 0x01
+#define UAC_DP_MODE_SELECT 0x02
+
+/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
+#define UAC_3D_ENABLE 0x01
+#define UAC_3D_SPACE 0x02
+
+/* A.10.3.4 Reverberation Processing Unit Control Selectors */
+#define UAC_REVERB_ENABLE 0x01
+#define UAC_REVERB_LEVEL 0x02
+#define UAC_REVERB_TIME 0x03
+#define UAC_REVERB_FEEDBACK 0x04
+
+/* A.10.3.5 Chorus Processing Unit Control Selectors */
+#define UAC_CHORUS_ENABLE 0x01
+#define UAC_CHORUS_LEVEL 0x02
+#define UAC_CHORUS_RATE 0x03
+#define UAC_CHORUS_DEPTH 0x04
+
+/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
+#define UAC_DCR_ENABLE 0x01
+#define UAC_DCR_RATE 0x02
+#define UAC_DCR_MAXAMPL 0x03
+#define UAC_DCR_THRESHOLD 0x04
+#define UAC_DCR_ATTACK_TIME 0x05
+#define UAC_DCR_RELEASE_TIME 0x06
+
+/* A.10.4 Extension Unit Control Selectors */
+#define UAC_XU_ENABLE 0x01
+
+/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
+#define UAC_MS_HEADER 0x01
+#define UAC_MIDI_IN_JACK 0x02
+#define UAC_MIDI_OUT_JACK 0x03
+
+/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */
+#define UAC_MS_GENERAL 0x01
+
+/* Terminals - 2.1 USB Terminal Types */
+#define UAC_TERMINAL_UNDEFINED 0x100
+#define UAC_TERMINAL_STREAMING 0x101
+#define UAC_TERMINAL_VENDOR_SPEC 0x1FF
+
+/* Terminal Control Selectors */
+/* 4.3.2 Class-Specific AC Interface Descriptor */
+struct uac1_ac_header_descriptor {
+ __u8 bLength; /* 8 + n */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* UAC_MS_HEADER */
+ __le16 bcdADC; /* 0x0100 */
+ __le16 wTotalLength; /* includes Unit and Terminal desc. */
+ __u8 bInCollection; /* n */
+ __u8 baInterfaceNr[]; /* [n] */
+} __attribute__ ((packed));
+
+#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \
+struct uac1_ac_header_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __le16 bcdADC; \
+ __le16 wTotalLength; \
+ __u8 bInCollection; \
+ __u8 baInterfaceNr[n]; \
+} __attribute__ ((packed))
+
+/* 4.3.2.1 Input Terminal Descriptor */
+struct uac_input_terminal_descriptor {
+ __u8 bLength; /* in bytes: 12 */
+ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
+ __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */
+ __u8 bTerminalID; /* Constant uniquely terminal ID */
+ __le16 wTerminalType; /* USB Audio Terminal Types */
+ __u8 bAssocTerminal; /* ID of the Output Terminal associated */
+ __u8 bNrChannels; /* Number of logical output channels */
+ __le16 wChannelConfig;
+ __u8 iChannelNames;
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define UAC_DT_INPUT_TERMINAL_SIZE 12
+
+/* Terminals - 2.2 Input Terminal Types */
+#define UAC_INPUT_TERMINAL_UNDEFINED 0x200
+#define UAC_INPUT_TERMINAL_MICROPHONE 0x201
+#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202
+#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203
+#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204
+#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
+#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
+
+/* Terminals - control selectors */
+
+#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01
+
+/* 4.3.2.2 Output Terminal Descriptor */
+struct uac1_output_terminal_descriptor {
+ __u8 bLength; /* in bytes: 9 */
+ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
+ __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */
+ __u8 bTerminalID; /* Constant uniquely terminal ID */
+ __le16 wTerminalType; /* USB Audio Terminal Types */
+ __u8 bAssocTerminal; /* ID of the Input Terminal associated */
+ __u8 bSourceID; /* ID of the connected Unit or Terminal*/
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define UAC_DT_OUTPUT_TERMINAL_SIZE 9
+
+/* Terminals - 2.3 Output Terminal Types */
+#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300
+#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301
+#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302
+#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303
+#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304
+#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305
+#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
+#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
+
+/* Set bControlSize = 2 as default setting */
+#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \
+struct uac_feature_unit_descriptor_##ch { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bUnitID; \
+ __u8 bSourceID; \
+ __u8 bControlSize; \
+ __le16 bmaControls[ch + 1]; \
+ __u8 iFeature; \
+} __attribute__ ((packed))
+
+/* 4.3.2.3 Mixer Unit Descriptor */
+struct uac_mixer_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u8 bNrInPins;
+ __u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc)
+{
+ return desc->baSourceID[desc->bNrInPins];
+}
+
+static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc,
+ int protocol)
+{
+ if (protocol == UAC_VERSION_1)
+ return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ desc->baSourceID[desc->bNrInPins + 1];
+ else
+ return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
+ (desc->baSourceID[desc->bNrInPins + 3] << 16) |
+ (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ (desc->baSourceID[desc->bNrInPins + 1]);
+}
+
+static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ desc->baSourceID[desc->bNrInPins + 3] :
+ desc->baSourceID[desc->bNrInPins + 5];
+}
+
+static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ &desc->baSourceID[desc->bNrInPins + 4] :
+ &desc->baSourceID[desc->bNrInPins + 6];
+}
+
+static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc)
+{
+ __u8 *raw = (__u8 *) desc;
+ return raw[desc->bLength - 1];
+}
+
+/* 4.3.2.4 Selector Unit Descriptor */
+struct uac_selector_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUintID;
+ __u8 bNrInPins;
+ __u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
+{
+ __u8 *raw = (__u8 *) desc;
+ return raw[desc->bLength - 1];
+}
+
+/* 4.3.2.5 Feature Unit Descriptor */
+struct uac_feature_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u8 bSourceID;
+ __u8 bControlSize;
+ __u8 bmaControls[0]; /* variable length */
+} __attribute__((packed));
+
+static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc)
+{
+ __u8 *raw = (__u8 *) desc;
+ return raw[desc->bLength - 1];
+}
+
+/* 4.3.2.6 Processing Unit Descriptors */
+struct uac_processing_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u16 wProcessType;
+ __u8 bNrInPins;
+ __u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc)
+{
+ return desc->baSourceID[desc->bNrInPins];
+}
+
+static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ if (protocol == UAC_VERSION_1)
+ return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ desc->baSourceID[desc->bNrInPins + 1];
+ else
+ return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
+ (desc->baSourceID[desc->bNrInPins + 3] << 16) |
+ (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ (desc->baSourceID[desc->bNrInPins + 1]);
+}
+
+static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ desc->baSourceID[desc->bNrInPins + 3] :
+ desc->baSourceID[desc->bNrInPins + 5];
+}
+
+static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ desc->baSourceID[desc->bNrInPins + 4] :
+ desc->baSourceID[desc->bNrInPins + 6];
+}
+
+static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ &desc->baSourceID[desc->bNrInPins + 5] :
+ &desc->baSourceID[desc->bNrInPins + 7];
+}
+
+static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
+ return desc->baSourceID[desc->bNrInPins + control_size];
+}
+
+static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
+ return &desc->baSourceID[desc->bNrInPins + control_size + 1];
+}
+
+/* 4.5.2 Class-Specific AS Interface Descriptor */
+struct uac1_as_header_descriptor {
+ __u8 bLength; /* in bytes: 7 */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* AS_GENERAL */
+ __u8 bTerminalLink; /* Terminal ID of connected Terminal */
+ __u8 bDelay; /* Delay introduced by the data path */
+ __le16 wFormatTag; /* The Audio Data Format */
+} __attribute__ ((packed));
+
+#define UAC_DT_AS_HEADER_SIZE 7
+
+/* Formats - A.1.1 Audio Data Format Type I Codes */
+#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0
+#define UAC_FORMAT_TYPE_I_PCM 0x1
+#define UAC_FORMAT_TYPE_I_PCM8 0x2
+#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3
+#define UAC_FORMAT_TYPE_I_ALAW 0x4
+#define UAC_FORMAT_TYPE_I_MULAW 0x5
+
+struct uac_format_type_i_continuous_descriptor {
+ __u8 bLength; /* in bytes: 8 + (ns * 3) */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bNrChannels; /* physical channels in the stream */
+ __u8 bSubframeSize; /* */
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tLowerSamFreq[3];
+ __u8 tUpperSamFreq[3];
+} __attribute__ ((packed));
+
+#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14
+
+struct uac_format_type_i_discrete_descriptor {
+ __u8 bLength; /* in bytes: 8 + (ns * 3) */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bNrChannels; /* physical channels in the stream */
+ __u8 bSubframeSize; /* */
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tSamFreq[][3];
+} __attribute__ ((packed));
+
+#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \
+struct uac_format_type_i_discrete_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bFormatType; \
+ __u8 bNrChannels; \
+ __u8 bSubframeSize; \
+ __u8 bBitResolution; \
+ __u8 bSamFreqType; \
+ __u8 tSamFreq[n][3]; \
+} __attribute__ ((packed))
+
+#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
+
+struct uac_format_type_i_ext_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u8 bSubslotSize;
+ __u8 bBitResolution;
+ __u8 bHeaderLength;
+ __u8 bControlSize;
+ __u8 bSideBandProtocol;
+} __attribute__((packed));
+
+/* Formats - Audio Data Format Type I Codes */
+
+#define UAC_FORMAT_TYPE_II_MPEG 0x1001
+#define UAC_FORMAT_TYPE_II_AC3 0x1002
+
+struct uac_format_type_ii_discrete_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __le16 wMaxBitRate;
+ __le16 wSamplesPerFrame;
+ __u8 bSamFreqType;
+ __u8 tSamFreq[][3];
+} __attribute__((packed));
+
+struct uac_format_type_ii_ext_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u16 wMaxBitRate;
+ __u16 wSamplesPerFrame;
+ __u8 bHeaderLength;
+ __u8 bSideBandProtocol;
+} __attribute__((packed));
+
+/* type III */
+#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006
+
+/* Formats - A.2 Format Type Codes */
+#define UAC_FORMAT_TYPE_UNDEFINED 0x0
+#define UAC_FORMAT_TYPE_I 0x1
+#define UAC_FORMAT_TYPE_II 0x2
+#define UAC_FORMAT_TYPE_III 0x3
+#define UAC_EXT_FORMAT_TYPE_I 0x81
+#define UAC_EXT_FORMAT_TYPE_II 0x82
+#define UAC_EXT_FORMAT_TYPE_III 0x83
+
+struct uac_iso_endpoint_descriptor {
+ __u8 bLength; /* in bytes: 7 */
+ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
+ __u8 bDescriptorSubtype; /* EP_GENERAL */
+ __u8 bmAttributes;
+ __u8 bLockDelayUnits;
+ __le16 wLockDelay;
+} __attribute__((packed));
+#define UAC_ISO_ENDPOINT_DESC_SIZE 7
+
+#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01
+#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
+#define UAC_EP_CS_ATTR_FILL_MAX 0x80
+
+/* status word format (3.7.1.1) */
+
+#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2
+
+#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7)
+#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6)
+
+struct uac1_status_word {
+ __u8 bStatusType;
+ __u8 bOriginator;
+} __attribute__((packed));
+
+
+#endif /* _UAPI__LINUX_USB_AUDIO_H */
diff --git a/include/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h
index 81a927930bfd..81a927930bfd 100644
--- a/include/linux/usb/cdc.h
+++ b/include/uapi/linux/usb/cdc.h
diff --git a/include/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h
index 7692dc69ccf7..7692dc69ccf7 100644
--- a/include/linux/usb/ch11.h
+++ b/include/uapi/linux/usb/ch11.h
diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h
new file mode 100644
index 000000000000..50598472dc41
--- /dev/null
+++ b/include/uapi/linux/usb/ch9.h
@@ -0,0 +1,993 @@
+/*
+ * This file holds USB constants and structures that are needed for
+ * USB device APIs. These are used by the USB device model, which is
+ * defined in chapter 9 of the USB 2.0 specification and in the
+ * Wireless USB 1.0 (spread around). Linux has several APIs in C that
+ * need these:
+ *
+ * - the master/host side Linux-USB kernel driver API;
+ * - the "usbfs" user space API; and
+ * - the Linux "gadget" slave/device/peripheral side driver API.
+ *
+ * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
+ * act either as a USB master/host or as a USB slave/device. That means
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
+ *
+ * Note all descriptors are declared '__attribute__((packed))' so that:
+ *
+ * [a] they never get padded, either internally (USB spec writers
+ * probably handled that) or externally;
+ *
+ * [b] so that accessing bigger-than-a-bytes fields will never
+ * generate bus errors on any platform, even when the location of
+ * its descriptor inside a bundle isn't "naturally aligned", and
+ *
+ * [c] for consistency, removing all doubt even when it appears to
+ * someone that the two other points are non-issues for that
+ * particular descriptor type.
+ */
+
+#ifndef _UAPI__LINUX_USB_CH9_H
+#define _UAPI__LINUX_USB_CH9_H
+
+#include <linux/types.h> /* __u8 etc */
+#include <asm/byteorder.h> /* le16_to_cpu */
+
+/*-------------------------------------------------------------------------*/
+
+/* CONTROL REQUEST SUPPORT */
+
+/*
+ * USB directions
+ *
+ * This bit flag is used in endpoint descriptors' bEndpointAddress field.
+ * It's also one of three fields in control requests bRequestType.
+ */
+#define USB_DIR_OUT 0 /* to device */
+#define USB_DIR_IN 0x80 /* to host */
+
+/*
+ * USB types, the second of three bRequestType fields
+ */
+#define USB_TYPE_MASK (0x03 << 5)
+#define USB_TYPE_STANDARD (0x00 << 5)
+#define USB_TYPE_CLASS (0x01 << 5)
+#define USB_TYPE_VENDOR (0x02 << 5)
+#define USB_TYPE_RESERVED (0x03 << 5)
+
+/*
+ * USB recipients, the third of three bRequestType fields
+ */
+#define USB_RECIP_MASK 0x1f
+#define USB_RECIP_DEVICE 0x00
+#define USB_RECIP_INTERFACE 0x01
+#define USB_RECIP_ENDPOINT 0x02
+#define USB_RECIP_OTHER 0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT 0x04
+#define USB_RECIP_RPIPE 0x05
+
+/*
+ * Standard requests, for the bRequest field of a SETUP packet.
+ *
+ * These are qualified by the bRequestType field, so that for example
+ * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
+ * by a GET_STATUS request.
+ */
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+#define USB_REQ_SET_SEL 0x30
+#define USB_REQ_SET_ISOCH_DELAY 0x31
+
+#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION 0x0E
+#define USB_REQ_RPIPE_ABORT 0x0E
+#define USB_REQ_SET_HANDSHAKE 0x0F
+#define USB_REQ_RPIPE_RESET 0x0F
+#define USB_REQ_GET_HANDSHAKE 0x10
+#define USB_REQ_SET_CONNECTION 0x11
+#define USB_REQ_SET_SECURITY_DATA 0x12
+#define USB_REQ_GET_SECURITY_DATA 0x13
+#define USB_REQ_SET_WUSB_DATA 0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
+#define USB_REQ_LOOPBACK_DATA_READ 0x16
+#define USB_REQ_SET_INTERFACE_DS 0x17
+
+/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
+ * used by hubs to put ports into a new L1 suspend state, except that it
+ * forgot to define its number ...
+ */
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
+ * are at most sixteen features of each type.) Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
+ */
+#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
+#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
+#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
+#define USB_DEVICE_BATTERY 2 /* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
+#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
+
+/*
+ * Test Mode Selectors
+ * See USB 2.0 spec Table 9-7
+ */
+#define TEST_J 1
+#define TEST_K 2
+#define TEST_SE0_NAK 3
+#define TEST_PACKET 4
+#define TEST_FORCE_EN 5
+
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-6
+ */
+#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
+/*
+ * Suspend Options, Table 9-7 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
+
+#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
+
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */
+
+/**
+ * struct usb_ctrlrequest - SETUP data for a USB device control request
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (le16 byte order)
+ * @wIndex: matches the USB wIndex field (le16 byte order)
+ * @wLength: matches the USB wLength field (le16 byte order)
+ *
+ * This structure is used to send control requests to a USB device. It matches
+ * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
+ * USB spec for a fuller description of the different fields, and what they are
+ * used for.
+ *
+ * Note that the driver for any interface can issue control requests.
+ * For most devices, interfaces don't coordinate with each other, so
+ * such requests may be made at any time.
+ */
+struct usb_ctrlrequest {
+ __u8 bRequestType;
+ __u8 bRequest;
+ __le16 wValue;
+ __le16 wIndex;
+ __le16 wLength;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
+ * (rarely) accepted by SET_DESCRIPTOR.
+ *
+ * Note that all multi-byte values here are encoded in little endian
+ * byte order "on the wire". Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
+ */
+
+/*
+ * Descriptor types ... USB 2.0 spec table 9.5
+ */
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+#define USB_DT_DEVICE_QUALIFIER 0x06
+#define USB_DT_OTHER_SPEED_CONFIG 0x07
+#define USB_DT_INTERFACE_POWER 0x08
+/* these are from a minor usb 2.0 revision (ECN) */
+#define USB_DT_OTG 0x09
+#define USB_DT_DEBUG 0x0a
+#define USB_DT_INTERFACE_ASSOCIATION 0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY 0x0c
+#define USB_DT_KEY 0x0d
+#define USB_DT_ENCRYPTION_TYPE 0x0e
+#define USB_DT_BOS 0x0f
+#define USB_DT_DEVICE_CAPABILITY 0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
+#define USB_DT_WIRE_ADAPTER 0x21
+#define USB_DT_RPIPE 0x22
+#define USB_DT_CS_RADIO_CONTROL 0x23
+/* From the T10 UAS specification */
+#define USB_DT_PIPE_USAGE 0x24
+/* From the USB 3.0 spec */
+#define USB_DT_SS_ENDPOINT_COMP 0x30
+
+/* Conventional codes for class-specific descriptors. The convention is
+ * defined in the USB "Common Class" Spec (3.11). Individual class specs
+ * are authoritative for their usage, not the "common class" writeup.
+ */
+#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE)
+#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG)
+#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING)
+#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE)
+#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT)
+
+/* All standard descriptors have these 2 fields at the beginning */
+struct usb_descriptor_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __le16 idVendor;
+ __le16 idProduct;
+ __le16 bcdDevice;
+ __u8 iManufacturer;
+ __u8 iProduct;
+ __u8 iSerialNumber;
+ __u8 bNumConfigurations;
+} __attribute__ ((packed));
+
+#define USB_DT_DEVICE_SIZE 18
+
+
+/*
+ * Device and/or Interface Class codes
+ * as found in bDeviceClass or bInterfaceClass
+ * and defined by www.usb.org documents
+ */
+#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
+#define USB_CLASS_AUDIO 1
+#define USB_CLASS_COMM 2
+#define USB_CLASS_HID 3
+#define USB_CLASS_PHYSICAL 5
+#define USB_CLASS_STILL_IMAGE 6
+#define USB_CLASS_PRINTER 7
+#define USB_CLASS_MASS_STORAGE 8
+#define USB_CLASS_HUB 9
+#define USB_CLASS_CDC_DATA 0x0a
+#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
+#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
+#define USB_CLASS_VIDEO 0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
+#define USB_CLASS_MISC 0xef
+#define USB_CLASS_APP_SPEC 0xfe
+#define USB_CLASS_VENDOR_SPEC 0xff
+
+#define USB_SUBCLASS_VENDOR_SPEC 0xff
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_CONFIG: Configuration descriptor information.
+ *
+ * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
+ * descriptor type is different. Highspeed-capable devices can look
+ * different depending on what speed they're currently running. Only
+ * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
+ * descriptors.
+ */
+struct usb_config_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumInterfaces;
+ __u8 bConfigurationValue;
+ __u8 iConfiguration;
+ __u8 bmAttributes;
+ __u8 bMaxPower;
+} __attribute__ ((packed));
+
+#define USB_DT_CONFIG_SIZE 9
+
+/* from config descriptor bmAttributes */
+#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
+#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
+#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
+#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wData[1]; /* UTF-16LE encoded */
+} __attribute__ ((packed));
+
+/* note that "string" zero is special, it holds language codes that
+ * the device supports, not Unicode characters.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bInterfaceNumber;
+ __u8 bAlternateSetting;
+ __u8 bNumEndpoints;
+ __u8 bInterfaceClass;
+ __u8 bInterfaceSubClass;
+ __u8 bInterfaceProtocol;
+ __u8 iInterface;
+} __attribute__ ((packed));
+
+#define USB_DT_INTERFACE_SIZE 9
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENDPOINT: Endpoint descriptor */
+struct usb_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEndpointAddress;
+ __u8 bmAttributes;
+ __le16 wMaxPacketSize;
+ __u8 bInterval;
+
+ /* NOTE: these two are _only_ in audio endpoints. */
+ /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
+ __u8 bRefresh;
+ __u8 bSynchAddress;
+} __attribute__ ((packed));
+
+#define USB_DT_ENDPOINT_SIZE 7
+#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
+
+
+/*
+ * Endpoints
+ */
+#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
+#define USB_ENDPOINT_DIR_MASK 0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL 0
+#define USB_ENDPOINT_XFER_ISOC 1
+#define USB_ENDPOINT_XFER_BULK 2
+#define USB_ENDPOINT_XFER_INT 3
+#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE 0x30
+#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
+
+#define USB_ENDPOINT_SYNCTYPE 0x0c
+#define USB_ENDPOINT_SYNC_NONE (0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+/**
+ * usb_endpoint_type - get the endpoint's transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
+ * to @epd's transfer type.
+ */
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+/**
+ * usb_endpoint_dir_in - check if the endpoint has IN direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type IN, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+/**
+ * usb_endpoint_dir_out - check if the endpoint has OUT direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type OUT, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+/**
+ * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type bulk, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_bulk(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK);
+}
+
+/**
+ * usb_endpoint_xfer_control - check if the endpoint has control transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type control, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_control(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_CONTROL);
+}
+
+/**
+ * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type interrupt, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_int(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_INT);
+}
+
+/**
+ * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type isochronous, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_isoc(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC);
+}
+
+/**
+ * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+ return __le16_to_cpu(epd->wMaxPacketSize);
+}
+
+static inline int usb_endpoint_interrupt_type(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
+struct usb_ss_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bmAttributes;
+ __le16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE 6
+
+/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+ int max_streams;
+
+ if (!comp)
+ return 0;
+
+ max_streams = comp->bmAttributes & 0x1f;
+
+ if (!max_streams)
+ return 0;
+
+ max_streams = 1 << max_streams;
+
+ return max_streams;
+}
+
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p) (1 + ((p) & 0x3))
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
+struct usb_qualifier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __u8 bNumConfigurations;
+ __u8 bRESERVED;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_OTG (from OTG 1.0a supplement) */
+struct usb_otg_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bmAttributes; /* support for HNP, SRP, etc */
+} __attribute__ ((packed));
+
+/* from usb_otg_descriptor.bmAttributes */
+#define USB_OTG_SRP (1 << 0)
+#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
+struct usb_debug_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ /* bulk endpoints with 8 byte maxpacket */
+ __u8 bDebugInEndpoint;
+ __u8 bDebugOutEndpoint;
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
+struct usb_interface_assoc_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bFirstInterface;
+ __u8 bInterfaceCount;
+ __u8 bFunctionClass;
+ __u8 bFunctionSubClass;
+ __u8 bFunctionProtocol;
+ __u8 iFunction;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SECURITY: group of wireless security descriptors, including
+ * encryption types available for setting up a CC/association.
+ */
+struct usb_security_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumEncryptionTypes;
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
+ * may be retrieved.
+ */
+struct usb_key_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 bKeyData[0];
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
+struct usb_encryption_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEncryptionType;
+#define USB_ENC_TYPE_UNSECURE 0
+#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
+#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
+#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
+ __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
+ __u8 bAuthKeyIndex;
+} __attribute__((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_BOS: group of device-level capabilities */
+struct usb_bos_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumDeviceCaps;
+} __attribute__((packed));
+
+#define USB_DT_BOS_SIZE 5
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
+struct usb_dev_cap_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+} __attribute__((packed));
+
+#define USB_CAP_TYPE_WIRELESS_USB 1
+
+struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+
+ __u8 bmAttributes;
+#define USB_WIRELESS_P2P_DRD (1 << 1)
+#define USB_WIRELESS_BEACON_MASK (3 << 2)
+#define USB_WIRELESS_BEACON_SELF (1 << 2)
+#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
+#define USB_WIRELESS_BEACON_NONE (3 << 2)
+ __le16 wPHYRates; /* bit rates, Mbps */
+#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
+#define USB_WIRELESS_PHY_80 (1 << 1)
+#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
+#define USB_WIRELESS_PHY_160 (1 << 3)
+#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
+#define USB_WIRELESS_PHY_320 (1 << 5)
+#define USB_WIRELESS_PHY_400 (1 << 6)
+#define USB_WIRELESS_PHY_480 (1 << 7)
+ __u8 bmTFITXPowerInfo; /* TFI power levels */
+ __u8 bmFFITXPowerInfo; /* FFI power levels */
+ __le16 bmBandGroup;
+ __u8 bReserved;
+} __attribute__((packed));
+
+/* USB 2.0 Extension descriptor */
+#define USB_CAP_TYPE_EXT 2
+
+struct usb_ext_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __le32 bmAttributes;
+#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
+#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */
+#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/
+#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */
+#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
+} __attribute__((packed));
+
+#define USB_DT_USB_EXT_CAP_SIZE 7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define USB_SS_CAP_TYPE 3
+struct usb_ss_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bmAttributes;
+#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */
+ __le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */
+ __u8 bFunctionalitySupport;
+ __u8 bU1devExitLat;
+ __le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE 10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define CONTAINER_ID_TYPE 4
+struct usb_ss_container_id_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved;
+ __u8 ContainerID[16]; /* 128-bit number */
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE 20
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
+ * each endpoint descriptor for a wireless device
+ */
+struct usb_wireless_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bMaxSequence;
+ __le16 wMaxStreamDelay;
+ __le16 wOverTheAirPacketSize;
+ __u8 bOverTheAirInterval;
+ __u8 bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
+#define USB_ENDPOINT_SWITCH_NO 0
+#define USB_ENDPOINT_SWITCH_SWITCH 1
+#define USB_ENDPOINT_SWITCH_SCALE 2
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
+ * host and a device for connection set up, mutual authentication, and
+ * exchanging short lived session keys. The handshake depends on a CC.
+ */
+struct usb_handshake {
+ __u8 bMessageNumber;
+ __u8 bStatus;
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 CDID[16];
+ __u8 nonce[16];
+ __u8 MIC[8];
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
+ * A CC may also be set up using non-wireless secure channels (including
+ * wired USB!), and some devices may support CCs with multiple hosts.
+ */
+struct usb_connection_context {
+ __u8 CHID[16]; /* persistent host id */
+ __u8 CDID[16]; /* device id (unique w/in host context) */
+ __u8 CK[16]; /* connection key */
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB 2.0 defines three speeds, here's how Linux identifies them */
+
+enum usb_device_speed {
+ USB_SPEED_UNKNOWN = 0, /* enumerating */
+ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
+ USB_SPEED_HIGH, /* usb 2.0 */
+ USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
+ USB_SPEED_SUPER, /* usb 3.0 */
+};
+
+
+enum usb_device_state {
+ /* NOTATTACHED isn't in the USB spec, and this state acts
+ * the same as ATTACHED ... but it's clearer this way.
+ */
+ USB_STATE_NOTATTACHED = 0,
+
+ /* chapter 9 and authentication (wireless) device states */
+ USB_STATE_ATTACHED,
+ USB_STATE_POWERED, /* wired */
+ USB_STATE_RECONNECTING, /* auth */
+ USB_STATE_UNAUTHENTICATED, /* auth */
+ USB_STATE_DEFAULT, /* limited function */
+ USB_STATE_ADDRESS,
+ USB_STATE_CONFIGURED, /* most functions */
+
+ USB_STATE_SUSPENDED
+
+ /* NOTE: there are actually four different SUSPENDED
+ * states, returning to POWERED, DEFAULT, ADDRESS, or
+ * CONFIGURED respectively when SOF tokens flow again.
+ * At this level there's no difference between L1 and L2
+ * suspend states. (L2 being original USB 1.1 suspend.)
+ */
+};
+
+enum usb3_link_state {
+ USB3_LPM_U0 = 0,
+ USB3_LPM_U1,
+ USB3_LPM_U2,
+ USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED 0x0
+#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
+#define USB3_LPM_DEVICE_INITIATED 0xFF
+
+struct usb_set_sel_req {
+ __u8 u1_sel;
+ __u8 u1_pel;
+ __le16 u2_sel;
+ __le16 u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW 100
+
+#endif /* _UAPI__LINUX_USB_CH9_H */
diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h
new file mode 100644
index 000000000000..d6b01283f85c
--- /dev/null
+++ b/include/uapi/linux/usb/functionfs.h
@@ -0,0 +1,169 @@
+#ifndef _UAPI__LINUX_FUNCTIONFS_H__
+#define _UAPI__LINUX_FUNCTIONFS_H__
+
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
+
+enum {
+ FUNCTIONFS_DESCRIPTORS_MAGIC = 1,
+ FUNCTIONFS_STRINGS_MAGIC = 2
+};
+
+
+#ifndef __KERNEL__
+
+/* Descriptor of an non-audio endpoint */
+struct usb_endpoint_descriptor_no_audio {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEndpointAddress;
+ __u8 bmAttributes;
+ __le16 wMaxPacketSize;
+ __u8 bInterval;
+} __attribute__((packed));
+
+
+/*
+ * All numbers must be in little endian order.
+ */
+
+struct usb_functionfs_descs_head {
+ __le32 magic;
+ __le32 length;
+ __le32 fs_count;
+ __le32 hs_count;
+} __attribute__((packed));
+
+/*
+ * Descriptors format:
+ *
+ * | off | name | type | description |
+ * |-----+-----------+--------------+--------------------------------------|
+ * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
+ * | 4 | length | LE32 | length of the whole data chunk |
+ * | 8 | fs_count | LE32 | number of full-speed descriptors |
+ * | 12 | hs_count | LE32 | number of high-speed descriptors |
+ * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors |
+ * | | hs_descrs | Descriptor[] | list of high-speed descriptors |
+ *
+ * descs are just valid USB descriptors and have the following format:
+ *
+ * | off | name | type | description |
+ * |-----+-----------------+------+--------------------------|
+ * | 0 | bLength | U8 | length of the descriptor |
+ * | 1 | bDescriptorType | U8 | descriptor type |
+ * | 2 | payload | | descriptor's payload |
+ */
+
+struct usb_functionfs_strings_head {
+ __le32 magic;
+ __le32 length;
+ __le32 str_count;
+ __le32 lang_count;
+} __attribute__((packed));
+
+/*
+ * Strings format:
+ *
+ * | off | name | type | description |
+ * |-----+------------+-----------------------+----------------------------|
+ * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC |
+ * | 4 | length | LE32 | length of the data chunk |
+ * | 8 | str_count | LE32 | number of strings |
+ * | 12 | lang_count | LE32 | number of languages |
+ * | 16 | stringtab | StringTab[lang_count] | table of strings per lang |
+ *
+ * For each language there is one stringtab entry (ie. there are lang_count
+ * stringtab entires). Each StringTab has following format:
+ *
+ * | off | name | type | description |
+ * |-----+---------+-------------------+------------------------------------|
+ * | 0 | lang | LE16 | language code |
+ * | 2 | strings | String[str_count] | array of strings in given language |
+ *
+ * For each string there is one strings entry (ie. there are str_count
+ * string entries). Each String is a NUL terminated string encoded in
+ * UTF-8.
+ */
+
+#endif
+
+
+/*
+ * Events are delivered on the ep0 file descriptor, when the user mode driver
+ * reads from this file descriptor after writing the descriptors. Don't
+ * stop polling this descriptor.
+ */
+
+enum usb_functionfs_event_type {
+ FUNCTIONFS_BIND,
+ FUNCTIONFS_UNBIND,
+
+ FUNCTIONFS_ENABLE,
+ FUNCTIONFS_DISABLE,
+
+ FUNCTIONFS_SETUP,
+
+ FUNCTIONFS_SUSPEND,
+ FUNCTIONFS_RESUME
+};
+
+/* NOTE: this structure must stay the same size and layout on
+ * both 32-bit and 64-bit kernels.
+ */
+struct usb_functionfs_event {
+ union {
+ /* SETUP: packet; DATA phase i/o precedes next event
+ *(setup.bmRequestType & USB_DIR_IN) flags direction */
+ struct usb_ctrlrequest setup;
+ } __attribute__((packed)) u;
+
+ /* enum usb_functionfs_event_type */
+ __u8 type;
+ __u8 _pad[3];
+} __attribute__((packed));
+
+
+/* Endpoint ioctls */
+/* The same as in gadgetfs */
+
+/* IN transfers may be reported to the gadget driver as complete
+ * when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ * complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define FUNCTIONFS_FIFO_STATUS _IO('g', 1)
+
+/* discards any unclaimed data in the fifo. */
+#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define FUNCTIONFS_CLEAR_HALT _IO('g', 3)
+
+/* Specific for functionfs */
+
+/*
+ * Returns reverse mapping of an interface. Called on EP0. If there
+ * is no such interface returns -EDOM. If function is not active
+ * returns -ENODEV.
+ */
+#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128)
+
+/*
+ * Returns real bEndpointAddress of an endpoint. If function is not
+ * active returns -ENODEV.
+ */
+#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129)
+
+
+
+#endif /* _UAPI__LINUX_FUNCTIONFS_H__ */
diff --git a/include/linux/usb/g_printer.h b/include/uapi/linux/usb/g_printer.h
index 6178fde50f74..6178fde50f74 100644
--- a/include/linux/usb/g_printer.h
+++ b/include/uapi/linux/usb/g_printer.h
diff --git a/include/linux/usb/gadgetfs.h b/include/uapi/linux/usb/gadgetfs.h
index 0bb12e0d4f8f..0bb12e0d4f8f 100644
--- a/include/linux/usb/gadgetfs.h
+++ b/include/uapi/linux/usb/gadgetfs.h
diff --git a/include/linux/usb/midi.h b/include/uapi/linux/usb/midi.h
index c8c52e3c91de..c8c52e3c91de 100644
--- a/include/linux/usb/midi.h
+++ b/include/uapi/linux/usb/midi.h
diff --git a/include/linux/usb/tmc.h b/include/uapi/linux/usb/tmc.h
index c045ae12556c..c045ae12556c 100644
--- a/include/linux/usb/tmc.h
+++ b/include/uapi/linux/usb/tmc.h
diff --git a/include/linux/usb/video.h b/include/uapi/linux/usb/video.h
index 3b3b95e01f71..3b3b95e01f71 100644
--- a/include/linux/usb/video.h
+++ b/include/uapi/linux/usb/video.h
diff --git a/include/xen/Kbuild b/include/xen/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/include/xen/Kbuild
+++ /dev/null
diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h
index aecee9d112cb..694dcaf266e6 100644
--- a/include/xen/grant_table.h
+++ b/include/xen/grant_table.h
@@ -170,7 +170,7 @@ gnttab_set_unmap_op(struct gnttab_unmap_grant_ref *unmap, phys_addr_t addr,
unmap->dev_bus_addr = 0;
}
-int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes,
unsigned long max_nr_gframes,
void **__shared);
int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes,
diff --git a/include/xen/interface/grant_table.h b/include/xen/interface/grant_table.h
index f9f8b975ae74..e40fae9bf11a 100644
--- a/include/xen/interface/grant_table.h
+++ b/include/xen/interface/grant_table.h
@@ -310,7 +310,7 @@ struct gnttab_setup_table {
uint32_t nr_frames;
/* OUT parameters. */
int16_t status; /* GNTST_* */
- GUEST_HANDLE(ulong) frame_list;
+ GUEST_HANDLE(xen_pfn_t) frame_list;
};
DEFINE_GUEST_HANDLE_STRUCT(gnttab_setup_table);
diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
index b66d04ce6957..90712e2072d5 100644
--- a/include/xen/interface/memory.h
+++ b/include/xen/interface/memory.h
@@ -179,28 +179,8 @@ struct xen_add_to_physmap {
};
DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap);
-/*
- * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error
- * code on failure. This call only works for auto-translated guests.
- */
-#define XENMEM_translate_gpfn_list 8
-struct xen_translate_gpfn_list {
- /* Which domain to translate for? */
- domid_t domid;
-
- /* Length of list. */
- xen_ulong_t nr_gpfns;
-
- /* List of GPFNs to translate. */
- GUEST_HANDLE(ulong) gpfn_list;
-
- /*
- * Output list to contain MFN translations. May be the same as the input
- * list (in which case each input GPFN is overwritten with the output MFN).
- */
- GUEST_HANDLE(ulong) mfn_list;
-};
-DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list);
+/*** REMOVED ***/
+/*#define XENMEM_translate_gpfn_list 8*/
/*
* Returns the pseudo-physical memory map as it was when the domain