diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-22 09:39:42 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-22 09:39:42 -0700 |
| commit | 813a95e5b4fa936bbde10ef89188932745dcd7f4 (patch) | |
| tree | 571ca345861ffb89b45fabe26fcab4e133c8537b /include | |
| parent | 9f639269ed1522c7d69c54cc8b80ab8ee53fcb10 (diff) | |
| parent | f3f08dcb9965f42378851ce888fb7539607712e6 (diff) | |
| download | linux-813a95e5b4fa936bbde10ef89188932745dcd7f4.tar.bz2 | |
Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm soc-specific pinctrl changes from Olof Johansson:
"With this, five platforms are moving to the relatively new pinctrl
subsystem for their pin management, replacing the older soc specific
in-kernel interfaces with common code.
There is quite a bit of net addition of code for each platform being
added to the pinctrl subsystem. But the payback comes later when
adding new boards can be done by only providing new device trees
instead."
Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c}
* tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits)
mtd: nand: gpmi: fix compile error caused by pinctrl call
ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig
ARM: nomadik: enable PINCTRL_NOMADIK where needed
ARM: mxs: enable pinctrl support
video: mxsfb: adopt pinctrl support
ASoC: mxs-saif: adopt pinctrl support
i2c: mxs: adopt pinctrl support
mtd: nand: gpmi: adopt pinctrl support
mmc: mxs-mmc: adopt pinctrl support
serial: mxs-auart: adopt pinctrl support
serial: amba-pl011: adopt pinctrl support
spi/imx: adopt pinctrl support
i2c: imx: adopt pinctrl support
can: flexcan: adopt pinctrl support
net: fec: adopt pinctrl support
ARM: ux500: switch MSP to using pinctrl for pins
ARM: ux500: alter MSP registration to return a device pointer
ARM: ux500: switch to using pinctrl for uart0
ARM: ux500: delete custom pin control system
ARM: ux500: switch over to Nomadik pinctrl driver
...
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/pinctrl/pinctrl-state.h | 13 | ||||
| -rw-r--r-- | include/linux/platform_data/tegra_usb.h | 1 |
2 files changed, 14 insertions, 0 deletions
diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h index 3920e28b4da7..634608dc6c89 100644 --- a/include/linux/pinctrl/pinctrl-state.h +++ b/include/linux/pinctrl/pinctrl-state.h @@ -2,5 +2,18 @@ * Standard pin control state definitions */ +/** + * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put + * into as default, usually this means the pins are up and ready to + * be used by the device driver. This state is commonly used by + * hogs to configure muxing and pins at boot. + * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into + * when the pins are idle. Could typically be set from a + * pm_runtime_suspend() operation. + * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into + * when the pins are sleeping. Could typically be set from a + * common suspend() function. + */ #define PINCTRL_STATE_DEFAULT "default" #define PINCTRL_STATE_IDLE "idle" +#define PINCTRL_STATE_SLEEP "sleep" diff --git a/include/linux/platform_data/tegra_usb.h b/include/linux/platform_data/tegra_usb.h index 6bca5b569acb..66c673fef408 100644 --- a/include/linux/platform_data/tegra_usb.h +++ b/include/linux/platform_data/tegra_usb.h @@ -26,6 +26,7 @@ struct tegra_ehci_platform_data { /* power down the phy on bus suspend */ int power_down_on_bus_suspend; void *phy_config; + int vbus_gpio; }; #endif /* _TEGRA_USB_H_ */ |