diff options
author | Daniel Vetter <daniel.vetter@ffwll.ch> | 2017-01-25 07:26:43 +0100 |
---|---|---|
committer | Daniel Vetter <daniel.vetter@ffwll.ch> | 2017-01-25 16:18:57 +0100 |
commit | 6806cdf9aa1c822afd89881e48908315aed18451 (patch) | |
tree | a7ee8c9d21445f3e729ed834bcc1a27f1ca59d01 /include | |
parent | 7b0a89a6db9a5912065e174162ec4a653c9b25d6 (diff) | |
download | linux-6806cdf9aa1c822afd89881e48908315aed18451.tar.bz2 |
drm/kms-helpers: Use recommened kerneldoc for struct member refs
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Comments from Gustavo.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch
Diffstat (limited to 'include')
-rw-r--r-- | include/drm/drm_atomic_helper.h | 13 | ||||
-rw-r--r-- | include/drm/drm_dp_mst_helper.h | 7 | ||||
-rw-r--r-- | include/drm/drm_flip_work.h | 2 | ||||
-rw-r--r-- | include/drm/drm_modeset_helper_vtables.h | 146 | ||||
-rw-r--r-- | include/drm/drm_simple_kms_helper.h | 12 |
5 files changed, 94 insertions, 86 deletions
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 9afcd3810785..d066e9491ae3 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -177,7 +177,8 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, * * This iterates over the current state, useful (for example) when applying * atomic state after it has been checked and swapped. To iterate over the - * planes which *will* be attached (for ->atomic_check()) see + * planes which *will* be attached (more useful in code called from + * &drm_mode_config_funcs.atomic_check) see * drm_atomic_crtc_state_for_each_plane(). */ #define drm_atomic_crtc_for_each_plane(plane, crtc) \ @@ -189,8 +190,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, * @crtc_state: the incoming crtc-state * * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be - * attached if the specified state is applied. Useful during (for example) - * ->atomic_check() operations, to validate the incoming state. + * attached if the specified state is applied. Useful during for example + * in code called from &drm_mode_config_funcs.atomic_check operations, to + * validate the incoming state. */ #define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \ drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask) @@ -202,8 +204,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, * @crtc_state: the incoming crtc-state * * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be - * attached if the specified state is applied. Useful during (for example) - * ->atomic_check() operations, to validate the incoming state. + * attached if the specified state is applied. Useful during for example + * in code called from &drm_mode_config_funcs.atomic_check operations, to + * validate the incoming state. * * Compared to just drm_atomic_crtc_state_for_each_plane() this also fills in a * const plane_state. This is useful when a driver just wants to peek at other diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h index 27f3e99f55d1..f4b4d154b98e 100644 --- a/include/drm/drm_dp_mst_helper.h +++ b/include/drm/drm_dp_mst_helper.h @@ -493,8 +493,8 @@ struct drm_dp_mst_topology_mgr { int total_pbn; /** - * @qlock: protects @tx_msg_downq, the tx_slots in struct - * &drm_dp_mst_branch and txmsg->state once they are queued + * @qlock: protects @tx_msg_downq, the &drm_dp_mst_branch.txslost and + * &drm_dp_sideband_msg_tx.state once they are queued */ struct mutex qlock; /** @@ -508,8 +508,7 @@ struct drm_dp_mst_topology_mgr { struct mutex payload_lock; /** * @proposed_vcpis: Array of pointers for the new VCPI allocation. The - * VCPI structure itself is embedded into the corresponding - * &drm_dp_mst_port structure. + * VCPI structure itself is &drm_dp_mst_port.vcpi. */ struct drm_dp_vcpi **proposed_vcpis; /** diff --git a/include/drm/drm_flip_work.h b/include/drm/drm_flip_work.h index d387cf06ae05..21c3d512d25c 100644 --- a/include/drm/drm_flip_work.h +++ b/include/drm/drm_flip_work.h @@ -54,7 +54,7 @@ typedef void (*drm_flip_func_t)(struct drm_flip_work *work, void *val); /** * struct drm_flip_task - flip work task * @node: list entry element - * @data: data to pass to work->func + * @data: data to pass to &drm_flip_work.func */ struct drm_flip_task { struct list_head node; diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index 46f5b349f059..091c42205667 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -111,9 +111,9 @@ struct drm_crtc_helper_funcs { * This callback is used to validate a mode. The parameter mode is the * display mode that userspace requested, adjusted_mode is the mode the * encoders need to be fed with. Note that this is the inverse semantics - * of the meaning for the &drm_encoder and &drm_bridge - * ->mode_fixup() functions. If the CRTC cannot support the requested - * conversion from mode to adjusted_mode it should reject the modeset. + * of the meaning for the &drm_encoder and &drm_bridge_funcs.mode_fixup + * vfunc. If the CRTC cannot support the requested conversion from mode + * to adjusted_mode it should reject the modeset. * * This function is used by both legacy CRTC helpers and atomic helpers. * With atomic helpers it is optional. @@ -134,17 +134,18 @@ struct drm_crtc_helper_funcs { * * Also beware that neither core nor helpers filter modes before * passing them to the driver: While the list of modes that is - * advertised to userspace is filtered using the connector's - * ->mode_valid() callback, neither the core nor the helpers do any - * filtering on modes passed in from userspace when setting a mode. It - * is therefore possible for userspace to pass in a mode that was - * previously filtered out using ->mode_valid() or add a custom mode - * that wasn't probed from EDID or similar to begin with. Even though - * this is an advanced feature and rarely used nowadays, some users rely - * on being able to specify modes manually so drivers must be prepared - * to deal with it. Specifically this means that all drivers need not - * only validate modes in ->mode_valid() but also in ->mode_fixup() to - * make sure invalid modes passed in from userspace are rejected. + * advertised to userspace is filtered using the + * &drm_connector.mode_valid callback, neither the core nor the helpers + * do any filtering on modes passed in from userspace when setting a + * mode. It is therefore possible for userspace to pass in a mode that + * was previously filtered out using &drm_connector.mode_valid or add a + * custom mode that wasn't probed from EDID or similar to begin with. + * Even though this is an advanced feature and rarely used nowadays, + * some users rely on being able to specify modes manually so drivers + * must be prepared to deal with it. Specifically this means that all + * drivers need not only validate modes in &drm_connector.mode_valid but + * also in this or in the &drm_encoder_helper_funcs.mode_fixup callback + * to make sure invalid modes passed in from userspace are rejected. * * RETURNS: * @@ -205,7 +206,7 @@ struct drm_crtc_helper_funcs { * optimized fast-path instead of a full mode set operation with all the * resulting flickering. If it is not present * drm_crtc_helper_set_config() will fall back to a full modeset, using - * the ->mode_set() callback. Since it can't update other planes it's + * the @mode_set callback. Since it can't update other planes it's * incompatible with atomic modeset support. * * This callback is only used by the CRTC helpers and deprecated. @@ -238,8 +239,7 @@ struct drm_crtc_helper_funcs { /** * @load_lut: * - * Load a LUT prepared with the @gamma_set functions from - * &drm_fb_helper_funcs. + * Load a LUT prepared with the &drm_fb_helper_funcs.gamma_set vfunc. * * This callback is optional and is only used by the fbdev emulation * helpers. @@ -257,10 +257,11 @@ struct drm_crtc_helper_funcs { * * This callback should be used to disable the CRTC. With the atomic * drivers it is called after all encoders connected to this CRTC have - * been shut off already using their own ->disable hook. If that - * sequence is too simple drivers can just add their own hooks and call - * it from this CRTC callback here by looping over all encoders - * connected to it using for_each_encoder_on_crtc(). + * been shut off already using their own + * &drm_encoder_helper_funcs.disable hook. If that sequence is too + * simple drivers can just add their own hooks and call it from this + * CRTC callback here by looping over all encoders connected to it using + * for_each_encoder_on_crtc(). * * This hook is used both by legacy CRTC helpers and atomic helpers. * Atomic drivers don't need to implement it if there's no need to @@ -289,10 +290,10 @@ struct drm_crtc_helper_funcs { * * This callback should be used to enable the CRTC. With the atomic * drivers it is called before all encoders connected to this CRTC are - * enabled through the encoder's own ->enable hook. If that sequence is - * too simple drivers can just add their own hooks and call it from this - * CRTC callback here by looping over all encoders connected to it using - * for_each_encoder_on_crtc(). + * enabled through the encoder's own &drm_encoder_helper_funcs.enable + * hook. If that sequence is too simple drivers can just add their own + * hooks and call it from this CRTC callback here by looping over all + * encoders connected to it using for_each_encoder_on_crtc(). * * This hook is used only by atomic helpers, for symmetry with @disable. * Atomic drivers don't need to implement it if there's no need to @@ -316,16 +317,16 @@ struct drm_crtc_helper_funcs { * beforehand. This is calling order used by the default helper * implementation in drm_atomic_helper_check(). * - * When using drm_atomic_helper_check_planes() CRTCs' ->atomic_check() - * hooks are called after the ones for planes, which allows drivers to - * assign shared resources requested by planes in the CRTC callback - * here. For more complicated dependencies the driver can call the provided - * check helpers multiple times until the computed state has a final - * configuration and everything has been checked. + * When using drm_atomic_helper_check_planes() this hook is called + * after the &drm_plane_helper_funcs.atomc_check hook for planes, which + * allows drivers to assign shared resources requested by planes in this + * callback here. For more complicated dependencies the driver can call + * the provided check helpers multiple times until the computed state + * has a final configuration and everything has been checked. * * This function is also allowed to inspect any other object's state and * can add more state objects to the atomic commit if needed. Care must - * be taken though to ensure that state check&compute functions for + * be taken though to ensure that state check and compute functions for * these added states are all called, and derived state in other objects * all updated. Again the recommendation is to just call check helpers * until a maximal configuration is reached. @@ -400,10 +401,11 @@ struct drm_crtc_helper_funcs { * * This callback should be used to disable the CRTC. With the atomic * drivers it is called after all encoders connected to this CRTC have - * been shut off already using their own ->disable hook. If that - * sequence is too simple drivers can just add their own hooks and call - * it from this CRTC callback here by looping over all encoders - * connected to it using for_each_encoder_on_crtc(). + * been shut off already using their own + * &drm_encoder_helper_funcs.disable hook. If that sequence is too + * simple drivers can just add their own hooks and call it from this + * CRTC callback here by looping over all encoders connected to it using + * for_each_encoder_on_crtc(). * * This hook is used only by atomic helpers. Atomic drivers don't * need to implement it if there's no need to disable anything at the @@ -483,16 +485,18 @@ struct drm_encoder_helper_funcs { * Also beware that neither core nor helpers filter modes before * passing them to the driver: While the list of modes that is * advertised to userspace is filtered using the connector's - * ->mode_valid() callback, neither the core nor the helpers do any - * filtering on modes passed in from userspace when setting a mode. It - * is therefore possible for userspace to pass in a mode that was - * previously filtered out using ->mode_valid() or add a custom mode - * that wasn't probed from EDID or similar to begin with. Even though - * this is an advanced feature and rarely used nowadays, some users rely - * on being able to specify modes manually so drivers must be prepared - * to deal with it. Specifically this means that all drivers need not - * only validate modes in ->mode_valid() but also in ->mode_fixup() to - * make sure invalid modes passed in from userspace are rejected. + * &drm_connector_helper_funcs.mode_valid callback, neither the core nor + * the helpers do any filtering on modes passed in from userspace when + * setting a mode. It is therefore possible for userspace to pass in a + * mode that was previously filtered out using + * &drm_connector_helper_funcs.mode_valid or add a custom mode that + * wasn't probed from EDID or similar to begin with. Even though this + * is an advanced feature and rarely used nowadays, some users rely on + * being able to specify modes manually so drivers must be prepared to + * deal with it. Specifically this means that all drivers need not only + * validate modes in &drm_connector.mode_valid but also in this or in + * the &drm_crtc_helper_funcs.mode_fixup callback to make sure + * invalid modes passed in from userspace are rejected. * * RETURNS: * @@ -544,7 +548,7 @@ struct drm_encoder_helper_funcs { * use this hook, because the helper library calls it only once and not * every time the display pipeline is suspend using either DPMS or the * new "ACTIVE" property. Such drivers should instead move all their - * encoder setup into the ->enable() callback. + * encoder setup into the @enable callback. * * This callback is used both by the legacy CRTC helpers and the atomic * modeset helpers. It is optional in the atomic helpers. @@ -570,7 +574,7 @@ struct drm_encoder_helper_funcs { * use this hook, because the helper library calls it only once and not * every time the display pipeline is suspended using either DPMS or the * new "ACTIVE" property. Such drivers should instead move all their - * encoder setup into the ->enable() callback. + * encoder setup into the @enable callback. * * This callback is used by the atomic modeset helpers in place of the * @mode_set callback, if set by the driver. It is optional and should @@ -621,10 +625,10 @@ struct drm_encoder_helper_funcs { * * This callback should be used to disable the encoder. With the atomic * drivers it is called before this encoder's CRTC has been shut off - * using the CRTC's own ->disable hook. If that sequence is too simple - * drivers can just add their own driver private encoder hooks and call - * them from CRTC's callback by looping over all encoders connected to - * it using for_each_encoder_on_crtc(). + * using their own &drm_crtc_helper_funcs.disable hook. If that + * sequence is too simple drivers can just add their own driver private + * encoder hooks and call them from CRTC's callback by looping over all + * encoders connected to it using for_each_encoder_on_crtc(). * * This hook is used both by legacy CRTC helpers and atomic helpers. * Atomic drivers don't need to implement it if there's no need to @@ -651,10 +655,10 @@ struct drm_encoder_helper_funcs { * * This callback should be used to enable the encoder. With the atomic * drivers it is called after this encoder's CRTC has been enabled using - * the CRTC's own ->enable hook. If that sequence is too simple drivers - * can just add their own driver private encoder hooks and call them - * from CRTC's callback by looping over all encoders connected to it - * using for_each_encoder_on_crtc(). + * their own &drm_crtc_helper_funcs.enable hook. If that sequence is + * too simple drivers can just add their own driver private encoder + * hooks and call them from CRTC's callback by looping over all encoders + * connected to it using for_each_encoder_on_crtc(). * * This hook is used only by atomic helpers, for symmetry with @disable. * Atomic drivers don't need to implement it if there's no need to @@ -716,7 +720,7 @@ struct drm_connector_helper_funcs { * @get_modes: * * This function should fill in all modes currently valid for the sink - * into the connector->probed_modes list. It should also update the + * into the &drm_connector.probed_modes list. It should also update the * EDID property by calling drm_mode_connector_update_edid_property(). * * The usual way to implement this is to cache the EDID retrieved in the @@ -725,8 +729,9 @@ struct drm_connector_helper_funcs { * them by calling drm_add_edid_modes(). But connectors that driver a * fixed panel can also manually add specific modes using * drm_mode_probed_add(). Drivers which manually add modes should also - * make sure that the @display_info, @width_mm and @height_mm fields of the - * &struct drm_connector are filled in. + * make sure that the &drm_connector.display_info, + * &drm_connector.width_mm and &drm_connector.height_mm fields are + * filled in. * * Virtual drivers that just want some standard VESA mode with a given * resolution can call drm_add_modes_noedid(), and mark the preferred @@ -735,7 +740,7 @@ struct drm_connector_helper_funcs { * Finally drivers that support audio probably want to update the ELD * data, too, using drm_edid_to_eld(). * - * This function is only called after the ->detect() hook has indicated + * This function is only called after the @detect hook has indicated * that a sink is connected and when the EDID isn't overridden through * sysfs or the kernel commandline. * @@ -768,8 +773,8 @@ struct drm_connector_helper_funcs { * * RETURNS: * - * Either MODE_OK or one of the failure reasons in enum - * &drm_mode_status. + * Either &drm_mode_status.MODE_OK or one of the failure reasons in &enum + * drm_mode_status. */ enum drm_mode_status (*mode_valid)(struct drm_connector *connector, struct drm_display_mode *mode); @@ -875,7 +880,7 @@ struct drm_plane_helper_funcs { * RETURNS: * * 0 on success or one of the following negative error codes allowed by - * the atomic_commit hook in &drm_mode_config_funcs. When using helpers + * the &drm_mode_config_funcs.atomic_commit vfunc. When using helpers * this callback is the only one which can fail an atomic commit, * everything else must complete successfully. */ @@ -898,7 +903,7 @@ struct drm_plane_helper_funcs { * * Drivers should check plane specific constraints in this hook. * - * When using drm_atomic_helper_check_planes() plane's ->atomic_check() + * When using drm_atomic_helper_check_planes() plane's @atomic_check * hooks are called before the ones for CRTCs, which allows drivers to * request shared resources that the CRTC controls here. For more * complicated dependencies the driver can call the provided check helpers @@ -907,7 +912,7 @@ struct drm_plane_helper_funcs { * * This function is also allowed to inspect any other object's state and * can add more state objects to the atomic commit if needed. Care must - * be taken though to ensure that state check&compute functions for + * be taken though to ensure that state check and compute functions for * these added states are all called, and derived state in other objects * all updated. Again the recommendation is to just call check helpers * until a maximal configuration is reached. @@ -936,8 +941,8 @@ struct drm_plane_helper_funcs { * @atomic_update: * * Drivers should use this function to update the plane state. This - * hook is called in-between the ->atomic_begin() and - * ->atomic_flush() of &drm_crtc_helper_funcs. + * hook is called in-between the &drm_crtc_helper_funcs.atomic_begin and + * drm_crtc_helper_funcs.atomic_flush callbacks. * * Note that the power state of the display pipe when this function is * called depends upon the exact helpers and calling sequence the driver @@ -953,14 +958,15 @@ struct drm_plane_helper_funcs { * @atomic_disable: * * Drivers should use this function to unconditionally disable a plane. - * This hook is called in-between the ->atomic_begin() and - * ->atomic_flush() of &drm_crtc_helper_funcs. It is an alternative to + * This hook is called in-between the + * &drm_crtc_helper_funcs.atomic_begin and + * drm_crtc_helper_funcs.atomic_flush callbacks. It is an alternative to * @atomic_update, which will be called for disabling planes, too, if * the @atomic_disable hook isn't implemented. * * This hook is also useful to disable planes in preparation of a modeset, * by calling drm_atomic_helper_disable_planes_on_crtc() from the - * ->disable() hook in &drm_crtc_helper_funcs. + * &drm_crtc_helper_funcs.disable hook. * * Note that the power state of the display pipe when this function is * called depends upon the exact helpers and calling sequence the driver diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h index d138d08a48c1..fffbb95a0915 100644 --- a/include/drm/drm_simple_kms_helper.h +++ b/include/drm/drm_simple_kms_helper.h @@ -77,9 +77,9 @@ struct drm_simple_display_pipe_funcs { /** * @prepare_fb: * - * Optional, called by &struct drm_plane_helper_funcs ->prepare_fb . - * Please read the documentation for the ->prepare_fb hook in - * &struct drm_plane_helper_funcs for more details. + * Optional, called by &drm_plane_helper_funcs.prepare_fb. Please read + * the documentation for the &drm_plane_helper_funcs.prepare_fb hook for + * more details. */ int (*prepare_fb)(struct drm_simple_display_pipe *pipe, struct drm_plane_state *plane_state); @@ -87,9 +87,9 @@ struct drm_simple_display_pipe_funcs { /** * @cleanup_fb: * - * Optional, called by &struct drm_plane_helper_funcs ->cleanup_fb . - * Please read the documentation for the ->cleanup_fb hook in - * &struct drm_plane_helper_funcs for more details. + * Optional, called by &drm_plane_helper_funcs.cleanup_fb. Please read + * the documentation for the &drm_plane_helper_funcs.cleanup_fb hook for + * more details. */ void (*cleanup_fb)(struct drm_simple_display_pipe *pipe, struct drm_plane_state *plane_state); |