Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2019-02-16

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong.

2) test all bpf progs in alu32 mode, from Jiong.

3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin.

4) support for IP encap in lwt bpf progs, from Peter.

5) remove XDP_QUERY_XSK_UMEM dead code, from Jan.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 89 insertions, 9 deletions

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 1777fa0c61e4..bcdd2474eee7 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -2016,6 +2016,19 @@ union bpf_attr {
  *			Only works if *skb* contains an IPv6 packet. Insert a
  *			Segment Routing Header (**struct ipv6_sr_hdr**) inside
  *			the IPv6 header.
+ *		**BPF_LWT_ENCAP_IP**
+ *			IP encapsulation (GRE/GUE/IPIP/etc). The outer header
+ *			must be IPv4 or IPv6, followed by zero or more
+ *			additional headers, up to LWT_BPF_MAX_HEADROOM total
+ *			bytes in all prepended headers. Please note that
+ *			if skb_is_gso(skb) is true, no more than two headers
+ *			can be prepended, and the inner header, if present,
+ *			should be either GRE or UDP/GUE.
+ *
+ *		BPF_LWT_ENCAP_SEG6*** types can be called by bpf programs of
+ *		type BPF_PROG_TYPE_LWT_IN; BPF_LWT_ENCAP_IP type can be called
+ *		by bpf programs of types BPF_PROG_TYPE_LWT_IN and
+ *		BPF_PROG_TYPE_LWT_XMIT.
  *
  * 		A call to this helper is susceptible to change the underlaying
  * 		packet buffer. Therefore, at load time, all checks on pointers
@@ -2329,6 +2342,23 @@ union bpf_attr {
  *		"**y**".
  *	Return
  *		0
+ *
+ * struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk)
+ *	Description
+ *		This helper gets a **struct bpf_sock** pointer such
+ *		that all the fields in bpf_sock can be accessed.
+ *	Return
+ *		A **struct bpf_sock** pointer on success, or NULL in
+ *		case of failure.
+ *
+ * struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk)
+ *	Description
+ *		This helper gets a **struct bpf_tcp_sock** pointer from a
+ *		**struct bpf_sock** pointer.
+ *
+ *	Return
+ *		A **struct bpf_tcp_sock** pointer on success, or NULL in
+ *		case of failure.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -2425,7 +2455,9 @@ union bpf_attr {
 	FN(msg_pop_data),		\
 	FN(rc_pointer_rel),		\
 	FN(spin_lock),			\
-	FN(spin_unlock),
+	FN(spin_unlock),		\
+	FN(sk_fullsock),		\
+	FN(tcp_sock),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -2498,7 +2530,8 @@ enum bpf_hdr_start_off {
 /* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */
 enum bpf_lwt_encap_mode {
 	BPF_LWT_ENCAP_SEG6,
-	BPF_LWT_ENCAP_SEG6_INLINE
+	BPF_LWT_ENCAP_SEG6_INLINE,
+	BPF_LWT_ENCAP_IP,
 };
 
 #define __bpf_md_ptr(type, name)	\
@@ -2545,6 +2578,7 @@ struct __sk_buff {
 	__u64 tstamp;
 	__u32 wire_len;
 	__u32 gso_segs;
+	__bpf_md_ptr(struct bpf_sock *, sk);
 };
 
 struct bpf_tunnel_key {
@@ -2586,7 +2620,15 @@ enum bpf_ret_code {
 	BPF_DROP = 2,
 	/* 3-6 reserved */
 	BPF_REDIRECT = 7,
-	/* >127 are reserved for prog type specific return codes */
+	/* >127 are reserved for prog type specific return codes.
+	 *
+	 * BPF_LWT_REROUTE: used by BPF_PROG_TYPE_LWT_IN and
+	 *    BPF_PROG_TYPE_LWT_XMIT to indicate that skb had been
+	 *    changed and should be routed based on its new L3 header.
+	 *    (This is an L3 redirect, as opposed to L2 redirect
+	 *    represented by BPF_REDIRECT above).
+	 */
+	BPF_LWT_REROUTE = 128,
 };
 
 struct bpf_sock {
@@ -2596,14 +2638,52 @@ struct bpf_sock {
 	__u32 protocol;
 	__u32 mark;
 	__u32 priority;
-	__u32 src_ip4;		/* Allows 1,2,4-byte read.
-				 * Stored in network byte order.
+	/* IP address also allows 1 and 2 bytes access */
+	__u32 src_ip4;
+	__u32 src_ip6[4];
+	__u32 src_port;		/* host byte order */
+	__u32 dst_port;		/* network byte order */
+	__u32 dst_ip4;
+	__u32 dst_ip6[4];
+	__u32 state;
+};
+
+struct bpf_tcp_sock {
+	__u32 snd_cwnd;		/* Sending congestion window		*/
+	__u32 srtt_us;		/* smoothed round trip time << 3 in usecs */
+	__u32 rtt_min;
+	__u32 snd_ssthresh;	/* Slow start size threshold		*/
+	__u32 rcv_nxt;		/* What we want to receive next		*/
+	__u32 snd_nxt;		/* Next sequence we send		*/
+	__u32 snd_una;		/* First byte we want an ack for	*/
+	__u32 mss_cache;	/* Cached effective mss, not including SACKS */
+	__u32 ecn_flags;	/* ECN status bits.			*/
+	__u32 rate_delivered;	/* saved rate sample: packets delivered */
+	__u32 rate_interval_us;	/* saved rate sample: time elapsed */
+	__u32 packets_out;	/* Packets which are "in flight"	*/
+	__u32 retrans_out;	/* Retransmitted packets out		*/
+	__u32 total_retrans;	/* Total retransmits for entire connection */
+	__u32 segs_in;		/* RFC4898 tcpEStatsPerfSegsIn
+				 * total number of segments in.
 				 */
-	__u32 src_ip6[4];	/* Allows 1,2,4-byte read.
-				 * Stored in network byte order.
+	__u32 data_segs_in;	/* RFC4898 tcpEStatsPerfDataSegsIn
+				 * total number of data segments in.
+				 */
+	__u32 segs_out;		/* RFC4898 tcpEStatsPerfSegsOut
+				 * The total number of segments sent.
+				 */
+	__u32 data_segs_out;	/* RFC4898 tcpEStatsPerfDataSegsOut
+				 * total number of data segments sent.
+				 */
+	__u32 lost_out;		/* Lost packets			*/
+	__u32 sacked_out;	/* SACK'd packets			*/
+	__u64 bytes_received;	/* RFC4898 tcpEStatsAppHCThruOctetsReceived
+				 * sum(delta(rcv_nxt)), or how many bytes
+				 * were acked.
 				 */
-	__u32 src_port;		/* Allows 4-byte read.
-				 * Stored in host byte order
+	__u64 bytes_acked;	/* RFC4898 tcpEStatsAppHCThruOctetsAcked
+				 * sum(delta(snd_una)), or how many bytes
+				 * were acked.
 				 */
 };