diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-15 13:22:29 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-15 13:22:29 -0800 |
| commit | d635a69dd4981cc51f90293f5f64268620ed1565 (patch) | |
| tree | 5e0a758b402ea7d624c25c3a343545dd29e80f31 /include/uapi | |
| parent | ac73e3dc8acd0a3be292755db30388c3580f5674 (diff) | |
| parent | efd5a1584537698220578227e6467638307c2a0b (diff) | |
| download | linux-d635a69dd4981cc51f90293f5f64268620ed1565.tar.bz2 | |
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
Diffstat (limited to 'include/uapi')
31 files changed, 737 insertions, 1083 deletions
diff --git a/include/uapi/asm-generic/socket.h b/include/uapi/asm-generic/socket.h index 77f7c1638eb1..4dcd13d097a9 100644 --- a/include/uapi/asm-generic/socket.h +++ b/include/uapi/asm-generic/socket.h @@ -119,6 +119,9 @@ #define SO_DETACH_REUSEPORT_BPF 68 +#define SO_PREFER_BUSY_POLL 69 +#define SO_BUSY_POLL_BUDGET 70 + #if !defined(__KERNEL__) #if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__)) diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index bb0ae945b36a..bdb317faa1dc 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -675,4 +675,30 @@ enum batadv_tp_meter_reason { BATADV_TP_REASON_TOO_MANY = 133, }; +/** + * enum batadv_ifla_attrs - batman-adv ifla nested attributes + */ +enum batadv_ifla_attrs { + /** + * @IFLA_BATADV_UNSPEC: unspecified attribute which is not parsed by + * rtnetlink + */ + IFLA_BATADV_UNSPEC, + + /** + * @IFLA_BATADV_ALGO_NAME: routing algorithm (name) which should be + * used by the newly registered batadv net_device. + */ + IFLA_BATADV_ALGO_NAME, + + /* add attributes above here, update the policy in soft-interface.c */ + + /** + * @__IFLA_BATADV_MAX: internal use + */ + __IFLA_BATADV_MAX, +}; + +#define IFLA_BATADV_MAX (__IFLA_BATADV_MAX - 1) + #endif /* _UAPI_LINUX_BATMAN_ADV_H_ */ diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 556216dc9703..77d7c1bb2923 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -157,6 +157,7 @@ enum bpf_map_type { BPF_MAP_TYPE_STRUCT_OPS, BPF_MAP_TYPE_RINGBUF, BPF_MAP_TYPE_INODE_STORAGE, + BPF_MAP_TYPE_TASK_STORAGE, }; /* Note that tracing related programs such as @@ -556,7 +557,12 @@ union bpf_attr { __aligned_u64 line_info; /* line info */ __u32 line_info_cnt; /* number of bpf_line_info records */ __u32 attach_btf_id; /* in-kernel BTF type id to attach to */ - __u32 attach_prog_fd; /* 0 to attach to vmlinux */ + union { + /* valid prog_fd to attach to bpf prog */ + __u32 attach_prog_fd; + /* or valid module BTF object fd or 0 to attach to vmlinux */ + __u32 attach_btf_obj_fd; + }; }; struct { /* anonymous struct used by BPF_OBJ_* commands */ @@ -3742,6 +3748,88 @@ union bpf_attr { * Return * The helper returns **TC_ACT_REDIRECT** on success or * **TC_ACT_SHOT** on error. + * + * void *bpf_task_storage_get(struct bpf_map *map, struct task_struct *task, void *value, u64 flags) + * Description + * Get a bpf_local_storage from the *task*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *task* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this + * helper enforces the key must be an task_struct and the map must also + * be a **BPF_MAP_TYPE_TASK_STORAGE**. + * + * Underneath, the value is stored locally at *task* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf_local_storage residing at *task*. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * long bpf_task_storage_delete(struct bpf_map *map, struct task_struct *task) + * Description + * Delete a bpf_local_storage from a *task*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + * + * struct task_struct *bpf_get_current_task_btf(void) + * Description + * Return a BTF pointer to the "current" task. + * This pointer can also be used in helpers that accept an + * *ARG_PTR_TO_BTF_ID* of type *task_struct*. + * Return + * Pointer to the current task. + * + * long bpf_bprm_opts_set(struct linux_binprm *bprm, u64 flags) + * Description + * Set or clear certain options on *bprm*: + * + * **BPF_F_BPRM_SECUREEXEC** Set the secureexec bit + * which sets the **AT_SECURE** auxv for glibc. The bit + * is cleared if the flag is not specified. + * Return + * **-EINVAL** if invalid *flags* are passed, zero otherwise. + * + * u64 bpf_ktime_get_coarse_ns(void) + * Description + * Return a coarse-grained version of the time elapsed since + * system boot, in nanoseconds. Does not include time the system + * was suspended. + * + * See: **clock_gettime**\ (**CLOCK_MONOTONIC_COARSE**) + * Return + * Current *ktime*. + * + * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size) + * Description + * Returns the stored IMA hash of the *inode* (if it's avaialable). + * If the hash is larger than *size*, then only *size* + * bytes will be copied to *dst* + * Return + * The **hash_algo** is returned on success, + * **-EOPNOTSUP** if IMA is disabled or **-EINVAL** if + * invalid arguments are passed. + * + * struct socket *bpf_sock_from_file(struct file *file) + * Description + * If the given file represents a socket, returns the associated + * socket. + * Return + * A pointer to a struct socket on success or NULL if the file is + * not a socket. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -3900,6 +3988,13 @@ union bpf_attr { FN(per_cpu_ptr), \ FN(this_cpu_ptr), \ FN(redirect_peer), \ + FN(task_storage_get), \ + FN(task_storage_delete), \ + FN(get_current_task_btf), \ + FN(bprm_opts_set), \ + FN(ktime_get_coarse_ns), \ + FN(ima_inode_hash), \ + FN(sock_from_file), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper @@ -4071,6 +4166,11 @@ enum bpf_lwt_encap_mode { BPF_LWT_ENCAP_IP, }; +/* Flags for bpf_bprm_opts_set helper */ +enum { + BPF_F_BPRM_SECUREEXEC = (1ULL << 0), +}; + #define __bpf_md_ptr(type, name) \ union { \ type name; \ @@ -4418,6 +4518,9 @@ struct bpf_btf_info { __aligned_u64 btf; __u32 btf_size; __u32 id; + __aligned_u64 name; + __u32 name_len; + __u32 kernel_btf; } __attribute__((aligned(8))); struct bpf_link_info { diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h index 6a6d2c7655ff..f75238ac6dce 100644 --- a/include/uapi/linux/can.h +++ b/include/uapi/linux/can.h @@ -84,6 +84,7 @@ typedef __u32 can_err_mask_t; /* CAN payload length and DLC definitions according to ISO 11898-1 */ #define CAN_MAX_DLC 8 +#define CAN_MAX_RAW_DLC 15 #define CAN_MAX_DLEN 8 /* CAN FD payload length and DLC definitions according to ISO 11898-7 */ @@ -91,23 +92,32 @@ typedef __u32 can_err_mask_t; #define CANFD_MAX_DLEN 64 /** - * struct can_frame - basic CAN frame structure - * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition - * @can_dlc: frame payload length in byte (0 .. 8) aka data length code - * N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1 - * mapping of the 'data length code' to the real payload length - * @__pad: padding - * @__res0: reserved / padding - * @__res1: reserved / padding - * @data: CAN frame payload (up to 8 byte) + * struct can_frame - Classical CAN frame structure (aka CAN 2.0B) + * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition + * @len: CAN frame payload length in byte (0 .. 8) + * @can_dlc: deprecated name for CAN frame payload length in byte (0 .. 8) + * @__pad: padding + * @__res0: reserved / padding + * @len8_dlc: optional DLC value (9 .. 15) at 8 byte payload length + * len8_dlc contains values from 9 .. 15 when the payload length is + * 8 bytes but the DLC value (see ISO 11898-1) is greater then 8. + * CAN_CTRLMODE_CC_LEN8_DLC flag has to be enabled in CAN driver. + * @data: CAN frame payload (up to 8 byte) */ struct can_frame { canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ - __u8 can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */ - __u8 __pad; /* padding */ - __u8 __res0; /* reserved / padding */ - __u8 __res1; /* reserved / padding */ - __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8))); + union { + /* CAN frame payload length in byte (0 .. CAN_MAX_DLEN) + * was previously named can_dlc so we need to carry that + * name for legacy support + */ + __u8 len; + __u8 can_dlc; /* deprecated */ + }; + __u8 __pad; /* padding */ + __u8 __res0; /* reserved / padding */ + __u8 len8_dlc; /* optional DLC for 8 byte payload length (9 .. 15) */ + __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8))); }; /* diff --git a/include/uapi/linux/can/gw.h b/include/uapi/linux/can/gw.h index c2190bbe21d8..e4f0957554f3 100644 --- a/include/uapi/linux/can/gw.h +++ b/include/uapi/linux/can/gw.h @@ -98,8 +98,8 @@ enum { /* CAN frame elements that are affected by curr. 3 CAN frame modifications */ #define CGW_MOD_ID 0x01 -#define CGW_MOD_DLC 0x02 /* contains the data length in bytes */ -#define CGW_MOD_LEN CGW_MOD_DLC /* CAN FD length representation */ +#define CGW_MOD_DLC 0x02 /* Classical CAN data length code */ +#define CGW_MOD_LEN CGW_MOD_DLC /* CAN FD (plain) data length */ #define CGW_MOD_DATA 0x04 #define CGW_MOD_FLAGS 0x08 /* CAN FD flags */ diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h index 7793b26aa154..c55935b64ccc 100644 --- a/include/uapi/linux/can/isotp.h +++ b/include/uapi/linux/can/isotp.h @@ -135,7 +135,7 @@ struct can_isotp_ll_options { #define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */ #define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */ #define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */ - +#define CAN_ISOTP_SF_BROADCAST 0x800 /* 1-to-N functional addressing */ /* default values */ diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h index 6f598b73839e..f730d443b918 100644 --- a/include/uapi/linux/can/netlink.h +++ b/include/uapi/linux/can/netlink.h @@ -100,6 +100,7 @@ struct can_ctrlmode { #define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */ #define CAN_CTRLMODE_PRESUME_ACK 0x40 /* Ignore missing CAN ACKs */ #define CAN_CTRLMODE_FD_NON_ISO 0x80 /* CAN FD in non-ISO mode */ +#define CAN_CTRLMODE_CC_LEN8_DLC 0x100 /* Classic CAN DLC option */ /* * CAN device statistics diff --git a/include/uapi/linux/cfm_bridge.h b/include/uapi/linux/cfm_bridge.h new file mode 100644 index 000000000000..3c1cbd1db2f5 --- /dev/null +++ b/include/uapi/linux/cfm_bridge.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ + +#ifndef _UAPI_LINUX_CFM_BRIDGE_H_ +#define _UAPI_LINUX_CFM_BRIDGE_H_ + +#include <linux/types.h> +#include <linux/if_ether.h> + +#define ETHER_HEADER_LENGTH (6+6+4+2) +#define CFM_MAID_LENGTH 48 +#define CFM_CCM_PDU_LENGTH 75 +#define CFM_PORT_STATUS_TLV_LENGTH 4 +#define CFM_IF_STATUS_TLV_LENGTH 4 +#define CFM_IF_STATUS_TLV_TYPE 4 +#define CFM_PORT_STATUS_TLV_TYPE 2 +#define CFM_ENDE_TLV_TYPE 0 +#define CFM_CCM_MAX_FRAME_LENGTH (ETHER_HEADER_LENGTH+\ + CFM_CCM_PDU_LENGTH+\ + CFM_PORT_STATUS_TLV_LENGTH+\ + CFM_IF_STATUS_TLV_LENGTH) +#define CFM_FRAME_PRIO 7 +#define CFM_CCM_TLV_OFFSET 70 +#define CFM_CCM_PDU_MAID_OFFSET 10 +#define CFM_CCM_PDU_MEPID_OFFSET 8 +#define CFM_CCM_PDU_SEQNR_OFFSET 4 +#define CFM_CCM_PDU_TLV_OFFSET 74 +#define CFM_CCM_ITU_RESERVED_SIZE 16 + +struct br_cfm_common_hdr { + __u8 mdlevel_version; + __u8 opcode; + __u8 flags; + __u8 tlv_offset; +}; + +enum br_cfm_opcodes { + BR_CFM_OPCODE_CCM = 0x1, +}; + +/* MEP domain */ +enum br_cfm_domain { + BR_CFM_PORT, + BR_CFM_VLAN, +}; + +/* MEP direction */ +enum br_cfm_mep_direction { + BR_CFM_MEP_DIRECTION_DOWN, + BR_CFM_MEP_DIRECTION_UP, +}; + +/* CCM interval supported. */ +enum br_cfm_ccm_interval { + BR_CFM_CCM_INTERVAL_NONE, + BR_CFM_CCM_INTERVAL_3_3_MS, + BR_CFM_CCM_INTERVAL_10_MS, + BR_CFM_CCM_INTERVAL_100_MS, + BR_CFM_CCM_INTERVAL_1_SEC, + BR_CFM_CCM_INTERVAL_10_SEC, + BR_CFM_CCM_INTERVAL_1_MIN, + BR_CFM_CCM_INTERVAL_10_MIN, +}; + +#endif diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index 4c687686aa8f..13d59c51ef5b 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -121,6 +121,7 @@ enum { IFLA_BRIDGE_VLAN_INFO, IFLA_BRIDGE_VLAN_TUNNEL_INFO, IFLA_BRIDGE_MRP, + IFLA_BRIDGE_CFM, __IFLA_BRIDGE_MAX, }; #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) @@ -328,6 +329,130 @@ struct br_mrp_start_in_test { __u16 in_id; }; +enum { + IFLA_BRIDGE_CFM_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CREATE, + IFLA_BRIDGE_CFM_MEP_DELETE, + IFLA_BRIDGE_CFM_MEP_CONFIG, + IFLA_BRIDGE_CFM_CC_CONFIG, + IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD, + IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE, + IFLA_BRIDGE_CFM_CC_RDI, + IFLA_BRIDGE_CFM_CC_CCM_TX, + IFLA_BRIDGE_CFM_MEP_CREATE_INFO, + IFLA_BRIDGE_CFM_MEP_CONFIG_INFO, + IFLA_BRIDGE_CFM_CC_CONFIG_INFO, + IFLA_BRIDGE_CFM_CC_RDI_INFO, + IFLA_BRIDGE_CFM_CC_CCM_TX_INFO, + IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO, + IFLA_BRIDGE_CFM_MEP_STATUS_INFO, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO, + __IFLA_BRIDGE_CFM_MAX, +}; + +#define IFLA_BRIDGE_CFM_MAX (__IFLA_BRIDGE_CFM_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_CREATE_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE, + IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN, + IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION, + IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX, + __IFLA_BRIDGE_CFM_MEP_CREATE_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_CREATE_MAX (__IFLA_BRIDGE_CFM_MEP_CREATE_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_DELETE_UNSPEC, + IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE, + __IFLA_BRIDGE_CFM_MEP_DELETE_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_DELETE_MAX (__IFLA_BRIDGE_CFM_MEP_DELETE_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_CONFIG_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE, + IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC, + IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL, + IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID, + __IFLA_BRIDGE_CFM_MEP_CONFIG_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_CONFIG_MAX (__IFLA_BRIDGE_CFM_MEP_CONFIG_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_CONFIG_UNSPEC, + IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE, + IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE, + IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL, + IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID, + __IFLA_BRIDGE_CFM_CC_CONFIG_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_CONFIG_MAX (__IFLA_BRIDGE_CFM_CC_CONFIG_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_PEER_MEP_UNSPEC, + IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE, + IFLA_BRIDGE_CFM_CC_PEER_MEPID, + __IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX (__IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_RDI_UNSPEC, + IFLA_BRIDGE_CFM_CC_RDI_INSTANCE, + IFLA_BRIDGE_CFM_CC_RDI_RDI, + __IFLA_BRIDGE_CFM_CC_RDI_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_RDI_MAX (__IFLA_BRIDGE_CFM_CC_RDI_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_CCM_TX_UNSPEC, + IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE, + IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC, + IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE, + IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD, + IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV, + IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV, + IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE, + __IFLA_BRIDGE_CFM_CC_CCM_TX_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_CCM_TX_MAX (__IFLA_BRIDGE_CFM_CC_CCM_TX_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_STATUS_UNSPEC, + IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE, + IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN, + IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN, + IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN, + __IFLA_BRIDGE_CFM_MEP_STATUS_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_STATUS_MAX (__IFLA_BRIDGE_CFM_MEP_STATUS_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_PEER_STATUS_UNSPEC, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN, + __IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX (__IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX - 1) + struct bridge_stp_xstats { __u64 transition_blk; __u64 transition_fwd; @@ -526,6 +651,7 @@ struct br_mdb_entry { union { __be32 ip4; struct in6_addr ip6; + unsigned char mac_addr[ETH_ALEN]; } u; __be16 proto; } addr; diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index d6de2b167448..a0b637911d3c 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -99,6 +99,7 @@ #define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ #define ETH_P_NCSI 0x88F8 /* NCSI protocol */ #define ETH_P_PRP 0x88FB /* IEC 62439-3 PRP/HSRv0 */ +#define ETH_P_CFM 0x8902 /* Connectivity Fault Management */ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ #define ETH_P_IBOE 0x8915 /* Infiniband over Ethernet */ #define ETH_P_TDLS 0x890D /* TDLS */ diff --git a/include/uapi/linux/if_frad.h b/include/uapi/linux/if_frad.h deleted file mode 100644 index 3c6ee85f6262..000000000000 --- a/include/uapi/linux/if_frad.h +++ /dev/null @@ -1,123 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * DLCI/FRAD Definitions for Frame Relay Access Devices. DLCI devices are - * created for each DLCI associated with a FRAD. The FRAD driver - * is not truly a network device, but the lower level device - * handler. This allows other FRAD manufacturers to use the DLCI - * code, including its RFC1490 encapsulation alongside the current - * implementation for the Sangoma cards. - * - * Version: @(#)if_ifrad.h 0.15 31 Mar 96 - * - * Author: Mike McLagan <mike.mclagan@linux.org> - * - * Changes: - * 0.15 Mike McLagan changed structure defs (packed) - * re-arranged flags - * added DLCI_RET vars - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _UAPI_FRAD_H_ -#define _UAPI_FRAD_H_ - -#include <linux/if.h> - -/* Structures and constants associated with the DLCI device driver */ - -struct dlci_add -{ - char devname[IFNAMSIZ]; - short dlci; -}; - -#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2) -#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3) - -/* - * These are related to the Sangoma SDLA and should remain in order. - * Code within the SDLA module is based on the specifics of this - * structure. Change at your own peril. - */ -struct dlci_conf { - short flags; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* these are part of the status read */ - short Tc_fwd; - short Tc_bwd; - short Tf_max; - short Tb_max; - -/* add any new fields here above is a mirror of sdla_dlci_conf */ -}; - -#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4) - -/* configuration flags for DLCI */ -#define DLCI_IGNORE_CIR_OUT 0x0001 -#define DLCI_ACCOUNT_CIR_IN 0x0002 -#define DLCI_BUFFER_IF 0x0008 - -#define DLCI_VALID_FLAGS 0x000B - -/* defines for the actual Frame Relay hardware */ -#define FRAD_GET_CONF (SIOCDEVPRIVATE) -#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1) - -#define FRAD_LAST_IOCTL FRAD_SET_CONF - -/* - * Based on the setup for the Sangoma SDLA. If changes are - * necessary to this structure, a routine will need to be - * added to that module to copy fields. - */ -struct frad_conf -{ - short station; - short flags; - short kbaud; - short clocking; - short mtu; - short T391; - short T392; - short N391; - short N392; - short N393; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* Add new fields here, above is a mirror of the sdla_conf */ - -}; - -#define FRAD_STATION_CPE 0x0000 -#define FRAD_STATION_NODE 0x0001 - -#define FRAD_TX_IGNORE_CIR 0x0001 -#define FRAD_RX_ACCOUNT_CIR 0x0002 -#define FRAD_DROP_ABORTED 0x0004 -#define FRAD_BUFFERIF 0x0008 -#define FRAD_STATS 0x0010 -#define FRAD_MCI 0x0100 -#define FRAD_AUTODLCI 0x8000 -#define FRAD_VALID_FLAGS 0x811F - -#define FRAD_CLOCK_INT 0x0001 -#define FRAD_CLOCK_EXT 0x0000 - - -#endif /* _UAPI_FRAD_H_ */ diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index c4b23f06f69e..874cc12a34d9 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -588,6 +588,8 @@ enum { IFLA_MACVLAN_MACADDR, IFLA_MACVLAN_MACADDR_DATA, IFLA_MACVLAN_MACADDR_COUNT, + IFLA_MACVLAN_BC_QUEUE_LEN, + IFLA_MACVLAN_BC_QUEUE_LEN_USED, __IFLA_MACVLAN_MAX, }; diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h index 3d884d68eb30..c07caf7b40db 100644 --- a/include/uapi/linux/if_packet.h +++ b/include/uapi/linux/if_packet.h @@ -2,6 +2,7 @@ #ifndef __LINUX_IF_PACKET_H #define __LINUX_IF_PACKET_H +#include <asm/byteorder.h> #include <linux/types.h> struct sockaddr_pkt { @@ -296,6 +297,17 @@ struct packet_mreq { unsigned char mr_address[8]; }; +struct fanout_args { +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u16 id; + __u16 type_flags; +#else + __u16 type_flags; + __u16 id; +#endif + __u32 max_num_members; +}; + #define PACKET_MR_MULTICAST 0 #define PACKET_MR_PROMISC 1 #define PACKET_MR_ALLMULTI 2 diff --git a/include/uapi/linux/mrp_bridge.h b/include/uapi/linux/mrp_bridge.h index 6aeb13ef0b1e..9744773de5ff 100644 --- a/include/uapi/linux/mrp_bridge.h +++ b/include/uapi/linux/mrp_bridge.h @@ -61,6 +61,7 @@ enum br_mrp_tlv_header_type { BR_MRP_TLV_HEADER_IN_TOPO = 0x7, BR_MRP_TLV_HEADER_IN_LINK_DOWN = 0x8, BR_MRP_TLV_HEADER_IN_LINK_UP = 0x9, + BR_MRP_TLV_HEADER_IN_LINK_STATUS = 0xa, BR_MRP_TLV_HEADER_OPTION = 0x7f, }; diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index 11a72a938eb1..6397d75899bc 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -92,11 +92,11 @@ enum { /* Reserve empty slots */ IPSET_ATTR_CADT_MAX = 16, /* Create-only specific attributes */ - IPSET_ATTR_GC, + IPSET_ATTR_INITVAL, /* was unused IPSET_ATTR_GC */ IPSET_ATTR_HASHSIZE, IPSET_ATTR_MAXELEM, IPSET_ATTR_NETMASK, - IPSET_ATTR_PROBES, + IPSET_ATTR_BUCKETSIZE, /* was unused IPSET_ATTR_PROBES */ IPSET_ATTR_RESIZE, IPSET_ATTR_SIZE, /* Kernel-only */ @@ -214,6 +214,8 @@ enum ipset_cadt_flags { enum ipset_create_flags { IPSET_CREATE_FLAG_BIT_FORCEADD = 0, IPSET_CREATE_FLAG_FORCEADD = (1 << IPSET_CREATE_FLAG_BIT_FORCEADD), + IPSET_CREATE_FLAG_BIT_BUCKETSIZE = 1, + IPSET_CREATE_FLAG_BUCKETSIZE = (1 << IPSET_CREATE_FLAG_BIT_BUCKETSIZE), IPSET_CREATE_FLAG_BIT_MAX = 7, }; diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index 98272cb5f617..28b6ee53305f 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -361,6 +361,7 @@ enum nft_set_field_attributes { * @NFTA_SET_OBJ_TYPE: stateful object type (NLA_U32: NFT_OBJECT_*) * @NFTA_SET_HANDLE: set handle (NLA_U64) * @NFTA_SET_EXPR: set expression (NLA_NESTED: nft_expr_attributes) + * @NFTA_SET_EXPRESSIONS: list of expressions (NLA_NESTED: nft_list_attributes) */ enum nft_set_attributes { NFTA_SET_UNSPEC, @@ -381,6 +382,7 @@ enum nft_set_attributes { NFTA_SET_OBJ_TYPE, NFTA_SET_HANDLE, NFTA_SET_EXPR, + NFTA_SET_EXPRESSIONS, __NFTA_SET_MAX }; #define NFTA_SET_MAX (__NFTA_SET_MAX - 1) @@ -406,6 +408,7 @@ enum nft_set_elem_flags { * @NFTA_SET_ELEM_EXPR: expression (NLA_NESTED: nft_expr_attributes) * @NFTA_SET_ELEM_OBJREF: stateful object reference (NLA_STRING) * @NFTA_SET_ELEM_KEY_END: closing key value (NLA_NESTED: nft_data) + * @NFTA_SET_ELEM_EXPRESSIONS: list of expressions (NLA_NESTED: nft_list_attributes) */ enum nft_set_elem_attributes { NFTA_SET_ELEM_UNSPEC, @@ -419,6 +422,7 @@ enum nft_set_elem_attributes { NFTA_SET_ELEM_PAD, NFTA_SET_ELEM_OBJREF, NFTA_SET_ELEM_KEY_END, + NFTA_SET_ELEM_EXPRESSIONS, __NFTA_SET_ELEM_MAX }; #define NFTA_SET_ELEM_MAX (__NFTA_SET_ELEM_MAX - 1) @@ -715,6 +719,7 @@ enum nft_dynset_flags { * @NFTA_DYNSET_TIMEOUT: timeout value for the new element (NLA_U64) * @NFTA_DYNSET_EXPR: expression (NLA_NESTED: nft_expr_attributes) * @NFTA_DYNSET_FLAGS: flags (NLA_U32) + * @NFTA_DYNSET_EXPRESSIONS: list of expressions (NLA_NESTED: nft_list_attributes) */ enum nft_dynset_attributes { NFTA_DYNSET_UNSPEC, @@ -727,6 +732,7 @@ enum nft_dynset_attributes { NFTA_DYNSET_EXPR, NFTA_DYNSET_PAD, NFTA_DYNSET_FLAGS, + NFTA_DYNSET_EXPRESSIONS, __NFTA_DYNSET_MAX, }; #define NFTA_DYNSET_MAX (__NFTA_DYNSET_MAX - 1) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 47700a2b9af9..40832d13c2f1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -757,7 +757,8 @@ * of any other interfaces, and other interfaces will again take * precedence when they are used. * - * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. + * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface + * (no longer supported). * * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform * multicast to unicast conversion. When enabled, all multicast packets @@ -1177,6 +1178,10 @@ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included * if the recipient acknowledged the frame. * + * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is + * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to + * specify the wiphy index to be applied to. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1407,6 +1412,8 @@ enum nl80211_commands { NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, + NL80211_CMD_SET_SAR_SPECS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1750,8 +1757,9 @@ enum nl80211_commands { * specify just a single bitrate, which is to be used for the beacon. * The driver must also specify support for this with the extended * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, - * NL80211_EXT_FEATURE_BEACON_RATE_HT and - * NL80211_EXT_FEATURE_BEACON_RATE_VHT. + * NL80211_EXT_FEATURE_BEACON_RATE_HT, + * NL80211_EXT_FEATURE_BEACON_RATE_VHT and + * NL80211_EXT_FEATURE_BEACON_RATE_HE. * * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. @@ -2077,7 +2085,8 @@ enum nl80211_commands { * until the channel switch event. * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission * must be blocked on the current channel (before the channel switch - * operation). + * operation). Also included in the channel switch started event if quiet + * was requested by the AP. * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information * for the time while performing a channel switch. * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel @@ -2527,6 +2536,20 @@ enum nl80211_commands { * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. * + * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE + * derivation in WPA3-Personal networks which are using SAE authentication. + * This is a u8 attribute that encapsulates one of the values from + * &enum nl80211_sae_pwe_mechanism. + * + * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when + * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields + * of %nl80211_sar_attrs which specifies the sar type and related + * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. + * + * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and + * disassoc events to indicate that an immediate reconnect to the AP + * is desired. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3016,6 +3039,12 @@ enum nl80211_attrs { NL80211_ATTR_S1G_CAPABILITY, NL80211_ATTR_S1G_CAPABILITY_MASK, + NL80211_ATTR_SAE_PWE, + + NL80211_ATTR_RECONNECT_REQUESTED, + + NL80211_ATTR_SAR_SPEC, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -5896,6 +5925,9 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports * unsolicited broadcast probe response transmission * + * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate + * configuration (AP/mesh) with HE rates. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5956,6 +5988,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, NL80211_EXT_FEATURE_FILS_DISCOVERY, NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, + NL80211_EXT_FEATURE_BEACON_RATE_HE, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -7124,4 +7157,115 @@ enum nl80211_unsol_bcast_probe_resp_attributes { NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 }; + +/** + * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE + * derivation. Applicable only when WPA3-Personal SAE authentication is + * used. + * + * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that + * attribute is not present from userspace. + * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only + * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only + * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element + * can be used. + */ +enum nl80211_sae_pwe_mechanism { + NL80211_SAE_PWE_UNSPECIFIED, + NL80211_SAE_PWE_HUNT_AND_PECK, + NL80211_SAE_PWE_HASH_TO_ELEMENT, + NL80211_SAE_PWE_BOTH, +}; + +/** + * enum nl80211_sar_type - type of SAR specs + * + * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit + * + */ +enum nl80211_sar_type { + NL80211_SAR_TYPE_POWER, + + /* add new type here */ + + /* Keep last */ + NUM_NL80211_SAR_TYPE, +}; + +/** + * enum nl80211_sar_attrs - Attributes for SAR spec + * + * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. + * + * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power + * limit specifications. Each specification contains a set + * of %nl80211_sar_specs_attrs. + * + * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER + * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. + * + * For sar_capa dump, it contains array of + * %NL80211_SAR_ATTR_SPECS_START_FREQ + * and %NL80211_SAR_ATTR_SPECS_END_FREQ. + * + * @__NL80211_SAR_ATTR_LAST: Internal + * @NL80211_SAR_ATTR_MAX: highest sar attribute + * + * These attributes are used with %NL80211_CMD_SET_SAR_SPEC + */ +enum nl80211_sar_attrs { + __NL80211_SAR_ATTR_INVALID, + + NL80211_SAR_ATTR_TYPE, + NL80211_SAR_ATTR_SPECS, + + __NL80211_SAR_ATTR_LAST, + NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, +}; + +/** + * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs + * + * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual + * power limit value in units of 0.25 dBm if type is + * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). + * 0 means userspace doesn't have SAR limitation on this associated range. + * + * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the + * index of exported freq range table and the associated power limitation + * is applied to this range. + * + * Userspace isn't required to set all the ranges advertised by WLAN driver, + * and userspace can skip some certain ranges. These skipped ranges don't + * have SAR limitations, and they are same as setting the + * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any + * value higher than regulatory allowed value just means SAR power + * limitation is removed, but it's required to set at least one range. + * It's not allowed to set duplicated range in one SET operation. + * + * Every SET operation overwrites previous SET operation. + * + * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @__NL80211_SAR_ATTR_SPECS_LAST: Internal + * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute + */ +enum nl80211_sar_specs_attrs { + __NL80211_SAR_ATTR_SPECS_INVALID, + + NL80211_SAR_ATTR_SPECS_POWER, + NL80211_SAR_ATTR_SPECS_RANGE_INDEX, + NL80211_SAR_ATTR_SPECS_START_FREQ, + NL80211_SAR_ATTR_SPECS_END_FREQ, + + __NL80211_SAR_ATTR_SPECS_LAST, + NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/ppp-ioctl.h b/include/uapi/linux/ppp-ioctl.h index 7bd2a5a75348..8dbecb3ad036 100644 --- a/include/uapi/linux/ppp-ioctl.h +++ b/include/uapi/linux/ppp-ioctl.h @@ -115,6 +115,8 @@ struct pppol2tp_ioc_stats { #define PPPIOCATTCHAN _IOW('t', 56, int) /* attach to ppp channel */ #define PPPIOCGCHAN _IOR('t', 55, int) /* get ppp channel number */ #define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats) +#define PPPIOCBRIDGECHAN _IOW('t', 53, int) /* bridge one channel to another */ +#define PPPIOCUNBRIDGECHAN _IO('t', 54) /* unbridge channel */ #define SIOCGPPPSTATS (SIOCDEVPRIVATE + 0) #define SIOCGPPPVER (SIOCDEVPRIVATE + 1) /* NEVER change this!! */ diff --git a/include/uapi/linux/rfkill.h b/include/uapi/linux/rfkill.h index 2e00dcebebd0..03e8af87b364 100644 --- a/include/uapi/linux/rfkill.h +++ b/include/uapi/linux/rfkill.h @@ -70,12 +70,24 @@ enum rfkill_operation { }; /** + * enum rfkill_hard_block_reasons - hard block reasons + * @RFKILL_HARD_BLOCK_SIGNAL: the hardware rfkill signal is active + * @RFKILL_HARD_BLOCK_NOT_OWNER: the NIC is not owned by the host + */ +enum rfkill_hard_block_reasons { + RFKILL_HARD_BLOCK_SIGNAL = 1 << 0, + RFKILL_HARD_BLOCK_NOT_OWNER = 1 << 1, +}; + +/** * struct rfkill_event - events for userspace on /dev/rfkill * @idx: index of dev rfkill * @type: type of the rfkill struct * @op: operation code * @hard: hard state (0/1) * @soft: soft state (0/1) + * @hard_block_reasons: valid if hard is set. One or several reasons from + * &enum rfkill_hard_block_reasons. * * Structure used for userspace communication on /dev/rfkill, * used for events from the kernel and control to the kernel. @@ -84,7 +96,9 @@ struct rfkill_event { __u32 idx; __u8 type; __u8 op; - __u8 soft, hard; + __u8 soft; + __u8 hard; + __u8 hard_block_reasons; } __attribute__((packed)); /* diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index 9b814c92de12..b841caa4657e 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -396,11 +396,13 @@ struct rtnexthop { #define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ #define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ #define RTNH_F_ONLINK 4 /* Gateway is forced on link */ -#define RTNH_F_OFFLOAD 8 /* offloaded route */ +#define RTNH_F_OFFLOAD 8 /* Nexthop is offloaded */ #define RTNH_F_LINKDOWN 16 /* carrier-down on nexthop */ #define RTNH_F_UNRESOLVED 32 /* The entry is unresolved (ipmr) */ +#define RTNH_F_TRAP 64 /* Nexthop is trapping packets */ -#define RTNH_COMPARE_MASK (RTNH_F_DEAD | RTNH_F_LINKDOWN | RTNH_F_OFFLOAD) +#define RTNH_COMPARE_MASK (RTNH_F_DEAD | RTNH_F_LINKDOWN | \ + RTNH_F_OFFLOAD | RTNH_F_TRAP) /* Macros to handle hexthops */ @@ -766,12 +768,18 @@ enum { #define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg)) /* tcamsg flags stored in attribute TCA_ROOT_FLAGS * - * TCA_FLAG_LARGE_DUMP_ON user->kernel to request for larger than TCA_ACT_MAX_PRIO - * actions in a dump. All dump responses will contain the number of actions - * being dumped stored in for user app's consumption in TCA_ROOT_COUNT + * TCA_ACT_FLAG_LARGE_DUMP_ON user->kernel to request for larger than + * TCA_ACT_MAX_PRIO actions in a dump. All dump responses will contain the + * number of actions being dumped stored in for user app's consumption in + * TCA_ROOT_COUNT + * + * TCA_ACT_FLAG_TERSE_DUMP user->kernel to request terse (brief) dump that only + * includes essential action info (kind, index, etc.) * */ #define TCA_FLAG_LARGE_DUMP_ON (1 << 0) +#define TCA_ACT_FLAG_LARGE_DUMP_ON TCA_FLAG_LARGE_DUMP_ON +#define TCA_ACT_FLAG_TERSE_DUMP (1 << 1) /* New extended info filters for IFLA_EXT_MASK */ #define RTEXT_FILTER_VF (1 << 0) @@ -779,6 +787,8 @@ enum { #define RTEXT_FILTER_BRVLAN_COMPRESSED (1 << 2) #define RTEXT_FILTER_SKIP_STATS (1 << 3) #define RTEXT_FILTER_MRP (1 << 4) +#define RTEXT_FILTER_CFM_CONFIG (1 << 5) +#define RTEXT_FILTER_CFM_STATUS (1 << 6) /* End of information exported to user level */ diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 28ad40d9acba..cb78e7a739da 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -140,6 +140,7 @@ typedef __s32 sctp_assoc_t; #define SCTP_ECN_SUPPORTED 130 #define SCTP_EXPOSE_POTENTIALLY_FAILED_STATE 131 #define SCTP_EXPOSE_PF_STATE SCTP_EXPOSE_POTENTIALLY_FAILED_STATE +#define SCTP_REMOTE_UDP_ENCAPS_PORT 132 /* PR-SCTP policies */ #define SCTP_PR_SCTP_NONE 0x0000 @@ -1197,6 +1198,12 @@ struct sctp_event { uint8_t se_on; }; +struct sctp_udpencaps { + sctp_assoc_t sue_assoc_id; + struct sockaddr_storage sue_address; + uint16_t sue_port; +}; + /* SCTP Stream schedulers */ enum sctp_sched_type { SCTP_SS_FCFS, diff --git a/include/uapi/linux/sdla.h b/include/uapi/linux/sdla.h deleted file mode 100644 index 1e3735be6511..000000000000 --- a/include/uapi/linux/sdla.h +++ /dev/null @@ -1,117 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Global definitions for the Frame relay interface. - * - * Version: @(#)if_ifrad.h 0.20 13 Apr 96 - * - * Author: Mike McLagan <mike.mclagan@linux.org> - * - * Changes: - * 0.15 Mike McLagan Structure packing - * - * 0.20 Mike McLagan New flags for S508 buffer handling - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _UAPISDLA_H -#define _UAPISDLA_H - -/* adapter type */ -#define SDLA_TYPES -#define SDLA_S502A 5020 -#define SDLA_S502E 5021 -#define SDLA_S503 5030 -#define SDLA_S507 5070 -#define SDLA_S508 5080 -#define SDLA_S509 5090 -#define SDLA_UNKNOWN -1 - -/* port selection flags for the S508 */ -#define SDLA_S508_PORT_V35 0x00 -#define SDLA_S508_PORT_RS232 0x02 - -/* Z80 CPU speeds */ -#define SDLA_CPU_3M 0x00 -#define SDLA_CPU_5M 0x01 -#define SDLA_CPU_7M 0x02 -#define SDLA_CPU_8M 0x03 -#define SDLA_CPU_10M 0x04 -#define SDLA_CPU_16M 0x05 -#define SDLA_CPU_12M 0x06 - -/* some private IOCTLs */ -#define SDLA_IDENTIFY (FRAD_LAST_IOCTL + 1) -#define SDLA_CPUSPEED (FRAD_LAST_IOCTL + 2) -#define SDLA_PROTOCOL (FRAD_LAST_IOCTL + 3) - -#define SDLA_CLEARMEM (FRAD_LAST_IOCTL + 4) -#define SDLA_WRITEMEM (FRAD_LAST_IOCTL + 5) -#define SDLA_READMEM (FRAD_LAST_IOCTL + 6) - -struct sdla_mem { - int addr; - int len; - void __user *data; -}; - -#define SDLA_START (FRAD_LAST_IOCTL + 7) -#define SDLA_STOP (FRAD_LAST_IOCTL + 8) - -/* some offsets in the Z80's memory space */ -#define SDLA_NMIADDR 0x0000 -#define SDLA_CONF_ADDR 0x0010 -#define SDLA_S502A_NMIADDR 0x0066 -#define SDLA_CODE_BASEADDR 0x0100 -#define SDLA_WINDOW_SIZE 0x2000 -#define SDLA_ADDR_MASK 0x1FFF - -/* largest handleable block of data */ -#define SDLA_MAX_DATA 4080 -#define SDLA_MAX_MTU 4072 /* MAX_DATA - sizeof(fradhdr) */ -#define SDLA_MAX_DLCI 24 - -/* this should be the same as frad_conf */ -struct sdla_conf { - short station; - short config; - short kbaud; - short clocking; - short max_frm; - short T391; - short T392; - short N391; - short N392; - short N393; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; -}; - -/* this should be the same as dlci_conf */ -struct sdla_dlci_conf { - short config; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - short Tc_fwd; - short Tc_bwd; - short Tf_max; - short Tb_max; -}; - - -#endif /* _UAPISDLA_H */ diff --git a/include/uapi/linux/seg6_local.h b/include/uapi/linux/seg6_local.h index edc138bdc56d..3b39ef1dbb46 100644 --- a/include/uapi/linux/seg6_local.h +++ b/include/uapi/linux/seg6_local.h @@ -26,6 +26,7 @@ enum { SEG6_LOCAL_IIF, SEG6_LOCAL_OIF, SEG6_LOCAL_BPF, + SEG6_LOCAL_VRFTABLE, __SEG6_LOCAL_MAX, }; #define SEG6_LOCAL_MAX (__SEG6_LOCAL_MAX - 1) diff --git a/include/uapi/linux/smc.h b/include/uapi/linux/smc.h index 0e11ca421ca4..3e68da07fba2 100644 --- a/include/uapi/linux/smc.h +++ b/include/uapi/linux/smc.h @@ -33,4 +33,130 @@ enum { /* SMC PNET Table commands */ #define SMCR_GENL_FAMILY_NAME "SMC_PNETID" #define SMCR_GENL_FAMILY_VERSION 1 +/* gennetlink interface to access non-socket information from SMC module */ +#define SMC_GENL_FAMILY_NAME "SMC_GEN_NETLINK" +#define SMC_GENL_FAMILY_VERSION 1 + +#define SMC_PCI_ID_STR_LEN 16 /* Max length of pci id string */ + +/* SMC_GENL_FAMILY commands */ +enum { + SMC_NETLINK_GET_SYS_INFO = 1, + SMC_NETLINK_GET_LGR_SMCR, + SMC_NETLINK_GET_LINK_SMCR, + SMC_NETLINK_GET_LGR_SMCD, + SMC_NETLINK_GET_DEV_SMCD, + SMC_NETLINK_GET_DEV_SMCR, +}; + +/* SMC_GENL_FAMILY top level attributes */ +enum { + SMC_GEN_UNSPEC, + SMC_GEN_SYS_INFO, /* nest */ + SMC_GEN_LGR_SMCR, /* nest */ + SMC_GEN_LINK_SMCR, /* nest */ + SMC_GEN_LGR_SMCD, /* nest */ + SMC_GEN_DEV_SMCD, /* nest */ + SMC_GEN_DEV_SMCR, /* nest */ + __SMC_GEN_MAX, + SMC_GEN_MAX = __SMC_GEN_MAX - 1 +}; + +/* SMC_GEN_SYS_INFO attributes */ +enum { + SMC_NLA_SYS_UNSPEC, + SMC_NLA_SYS_VER, /* u8 */ + SMC_NLA_SYS_REL, /* u8 */ + SMC_NLA_SYS_IS_ISM_V2, /* u8 */ + SMC_NLA_SYS_LOCAL_HOST, /* string */ + SMC_NLA_SYS_SEID, /* string */ + __SMC_NLA_SYS_MAX, + SMC_NLA_SYS_MAX = __SMC_NLA_SYS_MAX - 1 +}; + +/* SMC_NLA_LGR_V2 nested attributes */ +enum { + SMC_NLA_LGR_V2_VER, /* u8 */ + SMC_NLA_LGR_V2_REL, /* u8 */ + SMC_NLA_LGR_V2_OS, /* u8 */ + SMC_NLA_LGR_V2_NEG_EID, /* string */ + SMC_NLA_LGR_V2_PEER_HOST, /* string */ +}; + +/* SMC_GEN_LGR_SMCR attributes */ +enum { + SMC_NLA_LGR_R_UNSPEC, + SMC_NLA_LGR_R_ID, /* u32 */ + SMC_NLA_LGR_R_ROLE, /* u8 */ + SMC_NLA_LGR_R_TYPE, /* u8 */ + SMC_NLA_LGR_R_PNETID, /* string */ + SMC_NLA_LGR_R_VLAN_ID, /* u8 */ + SMC_NLA_LGR_R_CONNS_NUM, /* u32 */ + __SMC_NLA_LGR_R_MAX, + SMC_NLA_LGR_R_MAX = __SMC_NLA_LGR_R_MAX - 1 +}; + +/* SMC_GEN_LINK_SMCR attributes */ +enum { + SMC_NLA_LINK_UNSPEC, + SMC_NLA_LINK_ID, /* u8 */ + SMC_NLA_LINK_IB_DEV, /* string */ + SMC_NLA_LINK_IB_PORT, /* u8 */ + SMC_NLA_LINK_GID, /* string */ + SMC_NLA_LINK_PEER_GID, /* string */ + SMC_NLA_LINK_CONN_CNT, /* u32 */ + SMC_NLA_LINK_NET_DEV, /* u32 */ + SMC_NLA_LINK_UID, /* u32 */ + SMC_NLA_LINK_PEER_UID, /* u32 */ + SMC_NLA_LINK_STATE, /* u32 */ + __SMC_NLA_LINK_MAX, + SMC_NLA_LINK_MAX = __SMC_NLA_LINK_MAX - 1 +}; + +/* SMC_GEN_LGR_SMCD attributes */ +enum { + SMC_NLA_LGR_D_UNSPEC, + SMC_NLA_LGR_D_ID, /* u32 */ + SMC_NLA_LGR_D_GID, /* u64 */ + SMC_NLA_LGR_D_PEER_GID, /* u64 */ + SMC_NLA_LGR_D_VLAN_ID, /* u8 */ + SMC_NLA_LGR_D_CONNS_NUM, /* u32 */ + SMC_NLA_LGR_D_PNETID, /* string */ + SMC_NLA_LGR_D_CHID, /* u16 */ + SMC_NLA_LGR_D_PAD, /* flag */ + SMC_NLA_LGR_V2, /* nest */ + __SMC_NLA_LGR_D_MAX, + SMC_NLA_LGR_D_MAX = __SMC_NLA_LGR_D_MAX - 1 +}; + +/* SMC_NLA_DEV_PORT nested attributes */ +enum { + SMC_NLA_DEV_PORT_UNSPEC, + SMC_NLA_DEV_PORT_PNET_USR, /* u8 */ + SMC_NLA_DEV_PORT_PNETID, /* string */ + SMC_NLA_DEV_PORT_NETDEV, /* u32 */ + SMC_NLA_DEV_PORT_STATE, /* u8 */ + SMC_NLA_DEV_PORT_VALID, /* u8 */ + SMC_NLA_DEV_PORT_LNK_CNT, /* u32 */ + __SMC_NLA_DEV_PORT_MAX, + SMC_NLA_DEV_PORT_MAX = __SMC_NLA_DEV_PORT_MAX - 1 +}; + +/* SMC_GEN_DEV_SMCD and SMC_GEN_DEV_SMCR attributes */ +enum { + SMC_NLA_DEV_UNSPEC, + SMC_NLA_DEV_USE_CNT, /* u32 */ + SMC_NLA_DEV_IS_CRIT, /* u8 */ + SMC_NLA_DEV_PCI_FID, /* u32 */ + SMC_NLA_DEV_PCI_CHID, /* u16 */ + SMC_NLA_DEV_PCI_VENDOR, /* u16 */ + SMC_NLA_DEV_PCI_DEVICE, /* u16 */ + SMC_NLA_DEV_PCI_ID, /* string */ + SMC_NLA_DEV_PORT, /* nest */ + SMC_NLA_DEV_PORT2, /* nest */ + SMC_NLA_DEV_IB_NAME, /* string */ + __SMC_NLA_DEV_MAX, + SMC_NLA_DEV_MAX = __SMC_NLA_DEV_MAX - 1 +}; + #endif /* _UAPI_LINUX_SMC_H */ diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index f84e7bcad6de..26fc60ce9298 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -159,6 +159,7 @@ enum UDP_MIB_SNDBUFERRORS, /* SndbufErrors */ UDP_MIB_CSUMERRORS, /* InCsumErrors */ UDP_MIB_IGNOREDMULTI, /* IgnoredMulti */ + UDP_MIB_MEMERRORS, /* MemErrors */ __UDP_MIB_MAX }; diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index cfcb10b75483..13ceeb395eb8 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -343,11 +343,15 @@ struct tcp_diag_md5sig { /* setsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) */ +#define TCP_RECEIVE_ZEROCOPY_FLAG_TLB_CLEAN_HINT 0x1 struct tcp_zerocopy_receive { __u64 address; /* in: address of mapping */ __u32 length; /* in/out: number of bytes to map/mapped */ __u32 recv_skip_hint; /* out: amount of bytes to skip */ __u32 inq; /* out: amount of bytes in read queue */ __s32 err; /* out: socket error */ + __u64 copybuf_address; /* in: copybuf address (small reads) */ + __s32 copybuf_len; /* in/out: copybuf bytes avail/used or error */ + __u32 flags; /* in: flags */ }; #endif /* _UAPI_LINUX_TCP_H */ diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index bcd2869ed472..0d54baea1d8d 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -77,6 +77,13 @@ #define TLS_CIPHER_AES_CCM_128_TAG_SIZE 16 #define TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE 8 +#define TLS_CIPHER_CHACHA20_POLY1305 54 +#define TLS_CIPHER_CHACHA20_POLY1305_IV_SIZE 12 +#define TLS_CIPHER_CHACHA20_POLY1305_KEY_SIZE 32 +#define TLS_CIPHER_CHACHA20_POLY1305_SALT_SIZE 0 +#define TLS_CIPHER_CHACHA20_POLY1305_TAG_SIZE 16 +#define TLS_CIPHER_CHACHA20_POLY1305_REC_SEQ_SIZE 8 + #define TLS_SET_RECORD_TYPE 1 #define TLS_GET_RECORD_TYPE 2 @@ -109,6 +116,14 @@ struct tls12_crypto_info_aes_ccm_128 { unsigned char rec_seq[TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE]; }; +struct tls12_crypto_info_chacha20_poly1305 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_CHACHA20_POLY1305_IV_SIZE]; + unsigned char key[TLS_CIPHER_CHACHA20_POLY1305_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_CHACHA20_POLY1305_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_CHACHA20_POLY1305_REC_SEQ_SIZE]; +}; + enum { TLS_INFO_UNSPEC, TLS_INFO_VERSION, diff --git a/include/uapi/linux/vm_sockets.h b/include/uapi/linux/vm_sockets.h index fd0ed7221645..46918a1852d7 100644 --- a/include/uapi/linux/vm_sockets.h +++ b/include/uapi/linux/vm_sockets.h @@ -18,6 +18,7 @@ #define _UAPI_VM_SOCKETS_H #include <linux/socket.h> +#include <linux/types.h> /* Option name for STREAM socket buffer size. Use as the option name in * setsockopt(3) or getsockopt(3) to set or get an unsigned long long that @@ -114,6 +115,26 @@ #define VMADDR_CID_HOST 2 +/* The current default use case for the vsock channel is the following: + * local vsock communication between guest and host and nested VMs setup. + * In addition to this, implicitly, the vsock packets are forwarded to the host + * if no host->guest vsock transport is set. + * + * Set this flag value in the sockaddr_vm corresponding field if the vsock + * packets need to be always forwarded to the host. Using this behavior, + * vsock communication between sibling VMs can be setup. + * + * This way can explicitly distinguish between vsock channels created for + * different use cases, such as nested VMs (or local communication between + * guest and host) and sibling VMs. + * + * The flag can be set in the connect logic in the user space application flow. + * In the listen logic (from kernel space) the flag is set on the remote peer + * address. This happens for an incoming connection when it is routed from the + * host and comes from the guest (local CID and remote CID > VMADDR_CID_HOST). + */ +#define VMADDR_FLAG_TO_HOST 0x01 + /* Invalid vSockets version. */ #define VM_SOCKETS_INVALID_VERSION -1U @@ -148,10 +169,13 @@ struct sockaddr_vm { unsigned short svm_reserved1; unsigned int svm_port; unsigned int svm_cid; + __u8 svm_flags; unsigned char svm_zero[sizeof(struct sockaddr) - sizeof(sa_family_t) - sizeof(unsigned short) - - sizeof(unsigned int) - sizeof(unsigned int)]; + sizeof(unsigned int) - + sizeof(unsigned int) - + sizeof(__u8)]; }; #define IOCTL_VM_SOCKETS_GET_LOCAL_CID _IO(7, 0xb9) diff --git a/include/uapi/linux/wimax.h b/include/uapi/linux/wimax.h deleted file mode 100644 index 9f6b77af2f6d..000000000000 --- a/include/uapi/linux/wimax.h +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Linux WiMax - * API for user space - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - Initial implementation - * - * - * This file declares the user/kernel protocol that is spoken over - * Generic Netlink, as well as any type declaration that is to be used - * by kernel and user space. - * - * It is intended for user space to clone it verbatim to use it as a - * primary reference for definitions. - * - * Stuff intended for kernel usage as well as full protocol and stack - * documentation is rooted in include/net/wimax.h. - */ - -#ifndef __LINUX__WIMAX_H__ -#define __LINUX__WIMAX_H__ - -#include <linux/types.h> - -enum { - /** - * Version of the interface (unsigned decimal, MMm, max 25.5) - * M - Major: change if removing or modifying an existing call. - * m - minor: change when adding a new call - */ - WIMAX_GNL_VERSION = 01, - /* Generic NetLink attributes */ - WIMAX_GNL_ATTR_INVALID = 0x00, - WIMAX_GNL_ATTR_MAX = 10, -}; - - -/* - * Generic NetLink operations - * - * Most of these map to an API call; _OP_ stands for operation, _RP_ - * for reply and _RE_ for report (aka: signal). - */ -enum { - WIMAX_GNL_OP_MSG_FROM_USER, /* User to kernel message */ - WIMAX_GNL_OP_MSG_TO_USER, /* Kernel to user message */ - WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */ - WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */ - WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */ - WIMAX_GNL_OP_STATE_GET, /* Request for current state */ -}; - - -/* Message from user / to user */ -enum { - WIMAX_GNL_MSG_IFIDX = 1, - WIMAX_GNL_MSG_PIPE_NAME, - WIMAX_GNL_MSG_DATA, -}; - - -/* - * wimax_rfkill() - * - * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's - * switch state (DISABLED/ENABLED). - */ -enum wimax_rf_state { - WIMAX_RF_OFF = 0, /* Radio is off, rfkill on/enabled */ - WIMAX_RF_ON = 1, /* Radio is on, rfkill off/disabled */ - WIMAX_RF_QUERY = 2, -}; - -/* Attributes */ -enum { - WIMAX_GNL_RFKILL_IFIDX = 1, - WIMAX_GNL_RFKILL_STATE, -}; - - -/* Attributes for wimax_reset() */ -enum { - WIMAX_GNL_RESET_IFIDX = 1, -}; - -/* Attributes for wimax_state_get() */ -enum { - WIMAX_GNL_STGET_IFIDX = 1, -}; - -/* - * Attributes for the Report State Change - * - * For now we just have the old and new states; new attributes might - * be added later on. - */ -enum { - WIMAX_GNL_STCH_IFIDX = 1, - WIMAX_GNL_STCH_STATE_OLD, - WIMAX_GNL_STCH_STATE_NEW, -}; - - -/** - * enum wimax_st - The different states of a WiMAX device - * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed, - * but still wimax_dev_add() hasn't been called. There is no state. - * - * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and - * networking stacks, but it is not initialized (normally that is - * done with 'ifconfig DEV up' [or equivalent], which can upload - * firmware and enable communications with the device). - * In this state, the device is powered down and using as less - * power as possible. - * This state is the default after a call to wimax_dev_add(). It - * is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED - * or %WIMAX_ST_RADIO_OFF in _probe() after the call to - * wimax_dev_add(). - * It is recommended that the driver leaves this state when - * calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV - * down'. - * - * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API - * operations are allowed to proceed except the ones needed to - * complete the device clean up process. - * - * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device - * is setup, but the device still requires some configuration - * before being operational. - * Some WiMAX API calls might work. - * - * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether - * by hardware or software switches). - * It is recommended to always leave the device in this state - * after initialization. - * - * @WIMAX_ST_READY: The device is fully up and radio is on. - * - * @WIMAX_ST_SCANNING: [optional] The device has been instructed to - * scan. In this state, the device cannot be actively connected to - * a network. - * - * @WIMAX_ST_CONNECTING: The device is connecting to a network. This - * state exists because in some devices, the connect process can - * include a number of negotiations between user space, kernel - * space and the device. User space needs to know what the device - * is doing. If the connect sequence in a device is atomic and - * fast, the device can transition directly to CONNECTED - * - * @WIMAX_ST_CONNECTED: The device is connected to a network. - * - * @__WIMAX_ST_INVALID: This is an invalid state used to mark the - * maximum numeric value of states. - * - * Description: - * - * Transitions from one state to another one are atomic and can only - * be caused in kernel space with wimax_state_change(). To read the - * state, use wimax_state_get(). - * - * States starting with __ are internal and shall not be used or - * referred to by drivers or userspace. They look ugly, but that's the - * point -- if any use is made non-internal to the stack, it is easier - * to catch on review. - * - * All API operations [with well defined exceptions] will take the - * device mutex before starting and then check the state. If the state - * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or - * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with - * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN. - * - * The order of the definitions is important, so we can do numerical - * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready - * to operate). - */ -/* - * The allowed state transitions are described in the table below - * (states in rows can go to states in columns where there is an X): - * - * UNINI RADIO READY SCAN CONNEC CONNEC - * NULL DOWN QUIESCING TIALIZED OFF NING TING TED - * NULL - x - * DOWN - x x x - * QUIESCING x - - * UNINITIALIZED x - x - * RADIO_OFF x - x - * READY x x - x x x - * SCANNING x x x - x x - * CONNECTING x x x x - x - * CONNECTED x x x - - * - * This table not available in kernel-doc because the formatting messes it up. - */ - enum wimax_st { - __WIMAX_ST_NULL = 0, - WIMAX_ST_DOWN, - __WIMAX_ST_QUIESCING, - WIMAX_ST_UNINITIALIZED, - WIMAX_ST_RADIO_OFF, - WIMAX_ST_READY, - WIMAX_ST_SCANNING, - WIMAX_ST_CONNECTING, - WIMAX_ST_CONNECTED, - __WIMAX_ST_INVALID /* Always keep last */ -}; - - -#endif /* #ifndef __LINUX__WIMAX_H__ */ diff --git a/include/uapi/linux/wimax/i2400m.h b/include/uapi/linux/wimax/i2400m.h deleted file mode 100644 index fd198bc24a3c..000000000000 --- a/include/uapi/linux/wimax/i2400m.h +++ /dev/null @@ -1,572 +0,0 @@ -/* - * Intel Wireless WiMax Connection 2400m - * Host-Device protocol interface definitions - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - Initial implementation - * - * - * This header defines the data structures and constants used to - * communicate with the device. - * - * BOOTMODE/BOOTROM/FIRMWARE UPLOAD PROTOCOL - * - * The firmware upload protocol is quite simple and only requires a - * handful of commands. See drivers/net/wimax/i2400m/fw.c for more - * details. - * - * The BCF data structure is for the firmware file header. - * - * - * THE DATA / CONTROL PROTOCOL - * - * This is the normal protocol spoken with the device once the - * firmware is uploaded. It transports data payloads and control - * messages back and forth. - * - * It consists 'messages' that pack one or more payloads each. The - * format is described in detail in drivers/net/wimax/i2400m/rx.c and - * tx.c. - * - * - * THE L3L4 PROTOCOL - * - * The term L3L4 refers to Layer 3 (the device), Layer 4 (the - * driver/host software). - * - * This is the control protocol used by the host to control the i2400m - * device (scan, connect, disconnect...). This is sent to / received - * as control frames. These frames consist of a header and zero or - * more TLVs with information. We call each control frame a "message". - * - * Each message is composed of: - * - * HEADER - * [TLV0 + PAYLOAD0] - * [TLV1 + PAYLOAD1] - * [...] - * [TLVN + PAYLOADN] - * - * The HEADER is defined by 'struct i2400m_l3l4_hdr'. The payloads are - * defined by a TLV structure (Type Length Value) which is a 'header' - * (struct i2400m_tlv_hdr) and then the payload. - * - * All integers are represented as Little Endian. - * - * - REQUESTS AND EVENTS - * - * The requests can be clasified as follows: - * - * COMMAND: implies a request from the host to the device requesting - * an action being performed. The device will reply with a - * message (with the same type as the command), status and - * no (TLV) payload. Execution of a command might cause - * events (of different type) to be sent later on as - * device's state changes. - * - * GET/SET: similar to COMMAND, but will not cause other - * EVENTs. The reply, in the case of GET, will contain - * TLVs with the requested information. - * - * EVENT: asynchronous messages sent from the device, maybe as a - * consequence of previous COMMANDs but disassociated from - * them. - * - * Only one request might be pending at the same time (ie: don't - * parallelize nor post another GET request before the previous - * COMMAND has been acknowledged with it's corresponding reply by the - * device). - * - * The different requests and their formats are described below: - * - * I2400M_MT_* Message types - * I2400M_MS_* Message status (for replies, events) - * i2400m_tlv_* TLVs - * - * data types are named 'struct i2400m_msg_OPNAME', OPNAME matching the - * operation. - */ - -#ifndef __LINUX__WIMAX__I2400M_H__ -#define __LINUX__WIMAX__I2400M_H__ - -#include <linux/types.h> -#include <linux/if_ether.h> - -/* - * Host Device Interface (HDI) common to all busses - */ - -/* Boot-mode (firmware upload mode) commands */ - -/* Header for the firmware file */ -struct i2400m_bcf_hdr { - __le32 module_type; - __le32 header_len; - __le32 header_version; - __le32 module_id; - __le32 module_vendor; - __le32 date; /* BCD YYYMMDD */ - __le32 size; /* in dwords */ - __le32 key_size; /* in dwords */ - __le32 modulus_size; /* in dwords */ - __le32 exponent_size; /* in dwords */ - __u8 reserved[88]; -} __attribute__ ((packed)); - -/* Boot mode opcodes */ -enum i2400m_brh_opcode { - I2400M_BRH_READ = 1, - I2400M_BRH_WRITE = 2, - I2400M_BRH_JUMP = 3, - I2400M_BRH_SIGNED_JUMP = 8, - I2400M_BRH_HASH_PAYLOAD_ONLY = 9, -}; - -/* Boot mode command masks and stuff */ -enum i2400m_brh { - I2400M_BRH_SIGNATURE = 0xcbbc0000, - I2400M_BRH_SIGNATURE_MASK = 0xffff0000, - I2400M_BRH_SIGNATURE_SHIFT = 16, - I2400M_BRH_OPCODE_MASK = 0x0000000f, - I2400M_BRH_RESPONSE_MASK = 0x000000f0, - I2400M_BRH_RESPONSE_SHIFT = 4, - I2400M_BRH_DIRECT_ACCESS = 0x00000400, - I2400M_BRH_RESPONSE_REQUIRED = 0x00000200, - I2400M_BRH_USE_CHECKSUM = 0x00000100, -}; - - -/** - * i2400m_bootrom_header - Header for a boot-mode command - * - * @cmd: the above command descriptor - * @target_addr: where on the device memory should the action be performed. - * @data_size: for read/write, amount of data to be read/written - * @block_checksum: checksum value (if applicable) - * @payload: the beginning of data attached to this header - */ -struct i2400m_bootrom_header { - __le32 command; /* Compose with enum i2400_brh */ - __le32 target_addr; - __le32 data_size; - __le32 block_checksum; - char payload[0]; -} __attribute__ ((packed)); - - -/* - * Data / control protocol - */ - -/* Packet types for the host-device interface */ -enum i2400m_pt { - I2400M_PT_DATA = 0, - I2400M_PT_CTRL, - I2400M_PT_TRACE, /* For device debug */ - I2400M_PT_RESET_WARM, /* device reset */ - I2400M_PT_RESET_COLD, /* USB[transport] reset, like reconnect */ - I2400M_PT_EDATA, /* Extended RX data */ - I2400M_PT_ILLEGAL -}; - - -/* - * Payload for a data packet - * - * This is prefixed to each and every outgoing DATA type. - */ -struct i2400m_pl_data_hdr { - __le32 reserved; -} __attribute__((packed)); - - -/* - * Payload for an extended data packet - * - * New in fw v1.4 - * - * @reorder: if this payload has to be reorder or not (and how) - * @cs: the type of data in the packet, as defined per (802.16e - * T11.13.19.1). Currently only 2 (IPv4 packet) supported. - * - * This is prefixed to each and every INCOMING DATA packet. - */ -struct i2400m_pl_edata_hdr { - __le32 reorder; /* bits defined in i2400m_ro */ - __u8 cs; - __u8 reserved[11]; -} __attribute__((packed)); - -enum i2400m_cs { - I2400M_CS_IPV4_0 = 0, - I2400M_CS_IPV4 = 2, -}; - -enum i2400m_ro { - I2400M_RO_NEEDED = 0x01, - I2400M_RO_TYPE = 0x03, - I2400M_RO_TYPE_SHIFT = 1, - I2400M_RO_CIN = 0x0f, - I2400M_RO_CIN_SHIFT = 4, - I2400M_RO_FBN = 0x07ff, - I2400M_RO_FBN_SHIFT = 8, - I2400M_RO_SN = 0x07ff, - I2400M_RO_SN_SHIFT = 21, -}; - -enum i2400m_ro_type { - I2400M_RO_TYPE_RESET = 0, - I2400M_RO_TYPE_PACKET, - I2400M_RO_TYPE_WS, - I2400M_RO_TYPE_PACKET_WS, -}; - - -/* Misc constants */ -enum { - I2400M_PL_ALIGN = 16, /* Payload data size alignment */ - I2400M_PL_SIZE_MAX = 0x3EFF, - I2400M_MAX_PLS_IN_MSG = 60, - /* protocol barkers: sync sequences; for notifications they - * are sent in groups of four. */ - I2400M_H2D_PREVIEW_BARKER = 0xcafe900d, - I2400M_COLD_RESET_BARKER = 0xc01dc01d, - I2400M_WARM_RESET_BARKER = 0x50f750f7, - I2400M_NBOOT_BARKER = 0xdeadbeef, - I2400M_SBOOT_BARKER = 0x0ff1c1a1, - I2400M_SBOOT_BARKER_6050 = 0x80000001, - I2400M_ACK_BARKER = 0xfeedbabe, - I2400M_D2H_MSG_BARKER = 0xbeefbabe, -}; - - -/* - * Hardware payload descriptor - * - * Bitfields encoded in a struct to enforce typing semantics. - * - * Look in rx.c and tx.c for a full description of the format. - */ -struct i2400m_pld { - __le32 val; -} __attribute__ ((packed)); - -#define I2400M_PLD_SIZE_MASK 0x00003fff -#define I2400M_PLD_TYPE_SHIFT 16 -#define I2400M_PLD_TYPE_MASK 0x000f0000 - -/* - * Header for a TX message or RX message - * - * @barker: preamble - * @size: used for management of the FIFO queue buffer; before - * sending, this is converted to be a real preamble. This - * indicates the real size of the TX message that starts at this - * point. If the highest bit is set, then this message is to be - * skipped. - * @sequence: sequence number of this message - * @offset: offset where the message itself starts -- see the comments - * in the file header about message header and payload descriptor - * alignment. - * @num_pls: number of payloads in this message - * @padding: amount of padding bytes at the end of the message to make - * it be of block-size aligned - * - * Look in rx.c and tx.c for a full description of the format. - */ -struct i2400m_msg_hdr { - union { - __le32 barker; - __u32 size; /* same size type as barker!! */ - }; - union { - __le32 sequence; - __u32 offset; /* same size type as barker!! */ - }; - __le16 num_pls; - __le16 rsv1; - __le16 padding; - __le16 rsv2; - struct i2400m_pld pld[0]; -} __attribute__ ((packed)); - - - -/* - * L3/L4 control protocol - */ - -enum { - /* Interface version */ - I2400M_L3L4_VERSION = 0x0100, -}; - -/* Message types */ -enum i2400m_mt { - I2400M_MT_RESERVED = 0x0000, - I2400M_MT_INVALID = 0xffff, - I2400M_MT_REPORT_MASK = 0x8000, - - I2400M_MT_GET_SCAN_RESULT = 0x4202, - I2400M_MT_SET_SCAN_PARAM = 0x4402, - I2400M_MT_CMD_RF_CONTROL = 0x4602, - I2400M_MT_CMD_SCAN = 0x4603, - I2400M_MT_CMD_CONNECT = 0x4604, - I2400M_MT_CMD_DISCONNECT = 0x4605, - I2400M_MT_CMD_EXIT_IDLE = 0x4606, - I2400M_MT_GET_LM_VERSION = 0x5201, - I2400M_MT_GET_DEVICE_INFO = 0x5202, - I2400M_MT_GET_LINK_STATUS = 0x5203, - I2400M_MT_GET_STATISTICS = 0x5204, - I2400M_MT_GET_STATE = 0x5205, - I2400M_MT_GET_MEDIA_STATUS = 0x5206, - I2400M_MT_SET_INIT_CONFIG = 0x5404, - I2400M_MT_CMD_INIT = 0x5601, - I2400M_MT_CMD_TERMINATE = 0x5602, - I2400M_MT_CMD_MODE_OF_OP = 0x5603, - I2400M_MT_CMD_RESET_DEVICE = 0x5604, - I2400M_MT_CMD_MONITOR_CONTROL = 0x5605, - I2400M_MT_CMD_ENTER_POWERSAVE = 0x5606, - I2400M_MT_GET_TLS_OPERATION_RESULT = 0x6201, - I2400M_MT_SET_EAP_SUCCESS = 0x6402, - I2400M_MT_SET_EAP_FAIL = 0x6403, - I2400M_MT_SET_EAP_KEY = 0x6404, - I2400M_MT_CMD_SEND_EAP_RESPONSE = 0x6602, - I2400M_MT_REPORT_SCAN_RESULT = 0xc002, - I2400M_MT_REPORT_STATE = 0xd002, - I2400M_MT_REPORT_POWERSAVE_READY = 0xd005, - I2400M_MT_REPORT_EAP_REQUEST = 0xe002, - I2400M_MT_REPORT_EAP_RESTART = 0xe003, - I2400M_MT_REPORT_ALT_ACCEPT = 0xe004, - I2400M_MT_REPORT_KEY_REQUEST = 0xe005, -}; - - -/* - * Message Ack Status codes - * - * When a message is replied-to, this status is reported. - */ -enum i2400m_ms { - I2400M_MS_DONE_OK = 0, - I2400M_MS_DONE_IN_PROGRESS = 1, - I2400M_MS_INVALID_OP = 2, - I2400M_MS_BAD_STATE = 3, - I2400M_MS_ILLEGAL_VALUE = 4, - I2400M_MS_MISSING_PARAMS = 5, - I2400M_MS_VERSION_ERROR = 6, - I2400M_MS_ACCESSIBILITY_ERROR = 7, - I2400M_MS_BUSY = 8, - I2400M_MS_CORRUPTED_TLV = 9, - I2400M_MS_UNINITIALIZED = 10, - I2400M_MS_UNKNOWN_ERROR = 11, - I2400M_MS_PRODUCTION_ERROR = 12, - I2400M_MS_NO_RF = 13, - I2400M_MS_NOT_READY_FOR_POWERSAVE = 14, - I2400M_MS_THERMAL_CRITICAL = 15, - I2400M_MS_MAX -}; - - -/** - * i2400m_tlv - enumeration of the different types of TLVs - * - * TLVs stand for type-length-value and are the header for a payload - * composed of almost anything. Each payload has a type assigned - * and a length. - */ -enum i2400m_tlv { - I2400M_TLV_L4_MESSAGE_VERSIONS = 129, - I2400M_TLV_SYSTEM_STATE = 141, - I2400M_TLV_MEDIA_STATUS = 161, - I2400M_TLV_RF_OPERATION = 162, - I2400M_TLV_RF_STATUS = 163, - I2400M_TLV_DEVICE_RESET_TYPE = 132, - I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601, - I2400M_TLV_CONFIG_IDLE_TIMEOUT = 611, - I2400M_TLV_CONFIG_D2H_DATA_FORMAT = 614, - I2400M_TLV_CONFIG_DL_HOST_REORDER = 615, -}; - - -struct i2400m_tlv_hdr { - __le16 type; - __le16 length; /* payload's */ - __u8 pl[0]; -} __attribute__((packed)); - - -struct i2400m_l3l4_hdr { - __le16 type; - __le16 length; /* payload's */ - __le16 version; - __le16 resv1; - __le16 status; - __le16 resv2; - struct i2400m_tlv_hdr pl[0]; -} __attribute__((packed)); - - -/** - * i2400m_system_state - different states of the device - */ -enum i2400m_system_state { - I2400M_SS_UNINITIALIZED = 1, - I2400M_SS_INIT, - I2400M_SS_READY, - I2400M_SS_SCAN, - I2400M_SS_STANDBY, - I2400M_SS_CONNECTING, - I2400M_SS_WIMAX_CONNECTED, - I2400M_SS_DATA_PATH_CONNECTED, - I2400M_SS_IDLE, - I2400M_SS_DISCONNECTING, - I2400M_SS_OUT_OF_ZONE, - I2400M_SS_SLEEPACTIVE, - I2400M_SS_PRODUCTION, - I2400M_SS_CONFIG, - I2400M_SS_RF_OFF, - I2400M_SS_RF_SHUTDOWN, - I2400M_SS_DEVICE_DISCONNECT, - I2400M_SS_MAX, -}; - - -/** - * i2400m_tlv_system_state - report on the state of the system - * - * @state: see enum i2400m_system_state - */ -struct i2400m_tlv_system_state { - struct i2400m_tlv_hdr hdr; - __le32 state; -} __attribute__((packed)); - - -struct i2400m_tlv_l4_message_versions { - struct i2400m_tlv_hdr hdr; - __le16 major; - __le16 minor; - __le16 branch; - __le16 reserved; -} __attribute__((packed)); - - -struct i2400m_tlv_detailed_device_info { - struct i2400m_tlv_hdr hdr; - __u8 reserved1[400]; - __u8 mac_address[ETH_ALEN]; - __u8 reserved2[2]; -} __attribute__((packed)); - - -enum i2400m_rf_switch_status { - I2400M_RF_SWITCH_ON = 1, - I2400M_RF_SWITCH_OFF = 2, -}; - -struct i2400m_tlv_rf_switches_status { - struct i2400m_tlv_hdr hdr; - __u8 sw_rf_switch; /* 1 ON, 2 OFF */ - __u8 hw_rf_switch; /* 1 ON, 2 OFF */ - __u8 reserved[2]; -} __attribute__((packed)); - - -enum { - i2400m_rf_operation_on = 1, - i2400m_rf_operation_off = 2 -}; - -struct i2400m_tlv_rf_operation { - struct i2400m_tlv_hdr hdr; - __le32 status; /* 1 ON, 2 OFF */ -} __attribute__((packed)); - - -enum i2400m_tlv_reset_type { - I2400M_RESET_TYPE_COLD = 1, - I2400M_RESET_TYPE_WARM -}; - -struct i2400m_tlv_device_reset_type { - struct i2400m_tlv_hdr hdr; - __le32 reset_type; -} __attribute__((packed)); - - -struct i2400m_tlv_config_idle_parameters { - struct i2400m_tlv_hdr hdr; - __le32 idle_timeout; /* 100 to 300000 ms [5min], 100 increments - * 0 disabled */ - __le32 idle_paging_interval; /* frames */ -} __attribute__((packed)); - - -enum i2400m_media_status { - I2400M_MEDIA_STATUS_LINK_UP = 1, - I2400M_MEDIA_STATUS_LINK_DOWN, - I2400M_MEDIA_STATUS_LINK_RENEW, -}; - -struct i2400m_tlv_media_status { - struct i2400m_tlv_hdr hdr; - __le32 media_status; -} __attribute__((packed)); - - -/* New in v1.4 */ -struct i2400m_tlv_config_idle_timeout { - struct i2400m_tlv_hdr hdr; - __le32 timeout; /* 100 to 300000 ms [5min], 100 increments - * 0 disabled */ -} __attribute__((packed)); - -/* New in v1.4 -- for backward compat, will be removed */ -struct i2400m_tlv_config_d2h_data_format { - struct i2400m_tlv_hdr hdr; - __u8 format; /* 0 old format, 1 enhanced */ - __u8 reserved[3]; -} __attribute__((packed)); - -/* New in v1.4 */ -struct i2400m_tlv_config_dl_host_reorder { - struct i2400m_tlv_hdr hdr; - __u8 reorder; /* 0 disabled, 1 enabled */ - __u8 reserved[3]; -} __attribute__((packed)); - - -#endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */ diff --git a/include/uapi/rdma/mlx5_user_ioctl_cmds.h b/include/uapi/rdma/mlx5_user_ioctl_cmds.h index e24d66d278cf..3fd9b380a091 100644 --- a/include/uapi/rdma/mlx5_user_ioctl_cmds.h +++ b/include/uapi/rdma/mlx5_user_ioctl_cmds.h @@ -232,7 +232,7 @@ enum mlx5_ib_device_query_context_attrs { MLX5_IB_ATTR_QUERY_CONTEXT_RESP_UCTX = (1U << UVERBS_ID_NS_SHIFT), }; -#define MLX5_IB_DW_MATCH_PARAM 0x80 +#define MLX5_IB_DW_MATCH_PARAM 0x90 struct mlx5_ib_match_params { __u32 match_params[MLX5_IB_DW_MATCH_PARAM]; |