diff options
| author | Claudiu Beznea <claudiu.beznea@microchip.com> | 2022-08-26 11:39:21 +0300 |
|---|---|---|
| committer | Claudiu Beznea <claudiu.beznea@microchip.com> | 2022-08-31 10:28:18 +0300 |
| commit | 7a94b83a7dc551607b6c4400df29151e6a951f07 (patch) | |
| tree | b10c9becc6b94ebf303853bad8918e79baff9a94 /include/soc/at91/sama7-ddr.h | |
| parent | a02875c4cbd6f3d2f33d70cc158a19ef02d4b84f (diff) | |
| download | linux-7a94b83a7dc551607b6c4400df29151e6a951f07.tar.bz2 | |
ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
On SAMA7G5, when resuming from backup and self-refresh, the bootloader
performs DDR PHY recalibration by restoring the value of ZQ0SR0 (stored
in RAM by Linux before going to backup and self-refresh). It has been
discovered that the current procedure doesn't work for all possible values
that might go to ZQ0SR0 due to hardware bug. The workaround to this is to
avoid storing some values in ZQ0SR0. Thus Linux will read the ZQ0SR0
register and cache its value in RAM after processing it (using
modified_gray_code array). The bootloader will restore the processed value.
Fixes: d2d4716d8384 ("ARM: at91: pm: save ddr phy calibration data to securam")
Suggested-by: Frederic Schumacher <frederic.schumacher@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-4-claudiu.beznea@microchip.com
Diffstat (limited to 'include/soc/at91/sama7-ddr.h')
| -rw-r--r-- | include/soc/at91/sama7-ddr.h | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h index 2706bc48c076..6ce3bd22f6c6 100644 --- a/include/soc/at91/sama7-ddr.h +++ b/include/soc/at91/sama7-ddr.h @@ -38,6 +38,10 @@ #define DDR3PHY_DSGCR_ODTPDD_ODT0 (1 << 20) /* ODT[0] Power Down Driver */ #define DDR3PHY_ZQ0SR0 (0x188) /* ZQ status register 0 */ +#define DDR3PHY_ZQ0SR0_PDO_OFF (0) /* Pull-down output impedance select offset */ +#define DDR3PHY_ZQ0SR0_PUO_OFF (5) /* Pull-up output impedance select offset */ +#define DDR3PHY_ZQ0SR0_PDODT_OFF (10) /* Pull-down on-die termination impedance select offset */ +#define DDR3PHY_ZQ0SRO_PUODT_OFF (15) /* Pull-up on-die termination impedance select offset */ #define DDR3PHY_DX0DLLCR (0x1CC) /* DDR3PHY DATX8 DLL Control Register */ #define DDR3PHY_DX1DLLCR (0x20C) /* DDR3PHY DATX8 DLL Control Register */ |