summaryrefslogtreecommitdiffstats
path: root/include/net
diff options
context:
space:
mode:
authorJohn W. Linville <linville@tuxdriver.com>2013-02-18 13:47:13 -0500
committerJohn W. Linville <linville@tuxdriver.com>2013-02-18 13:47:13 -0500
commit98d5fac2330779e6eea6431a90b44c7476260dcc (patch)
tree99870656d835fc6c12093bc67517956cc7b3d6ec /include/net
parent4153577a8d318ae02b3791341e10e78416de402f (diff)
parent9e97d14b4923da524d202f2e005d5d30b70db9d6 (diff)
downloadlinux-98d5fac2330779e6eea6431a90b44c7476260dcc.tar.bz2
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
Diffstat (limited to 'include/net')
-rw-r--r--include/net/cfg80211.h226
-rw-r--r--include/net/mac80211.h170
2 files changed, 317 insertions, 79 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f9df20028bbd..d581c6de5d64 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -19,6 +19,7 @@
#include <linux/nl80211.h>
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
+#include <linux/net.h>
#include <net/regulatory.h>
/**
@@ -99,6 +100,16 @@ enum ieee80211_band {
* @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
* is not permitted.
* @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel.
+ * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band,
+ * this flag indicates that an 80 MHz channel cannot use this
+ * channel as the control or any of the secondary channels.
+ * This may be due to the driver or due to regulatory bandwidth
+ * restrictions.
+ * @IEEE80211_CHAN_NO_160MHZ: If the driver supports 160 MHz on the band,
+ * this flag indicates that an 160 MHz channel cannot use this
+ * channel as the control or any of the secondary channels.
+ * This may be due to the driver or due to regulatory bandwidth
+ * restrictions.
*/
enum ieee80211_channel_flags {
IEEE80211_CHAN_DISABLED = 1<<0,
@@ -108,11 +119,16 @@ enum ieee80211_channel_flags {
IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
IEEE80211_CHAN_NO_OFDM = 1<<6,
+ IEEE80211_CHAN_NO_80MHZ = 1<<7,
+ IEEE80211_CHAN_NO_160MHZ = 1<<8,
};
#define IEEE80211_CHAN_NO_HT40 \
(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
+#define IEEE80211_DFS_MIN_CAC_TIME_MS 60000
+#define IEEE80211_DFS_MIN_NOP_TIME_MS (30 * 60 * 1000)
+
/**
* struct ieee80211_channel - channel definition
*
@@ -133,6 +149,9 @@ enum ieee80211_channel_flags {
* to enable this, this is useful only on 5 GHz band.
* @orig_mag: internal use
* @orig_mpwr: internal use
+ * @dfs_state: current state of this channel. Only relevant if radar is required
+ * on this channel.
+ * @dfs_state_entered: timestamp (jiffies) when the dfs state was entered.
*/
struct ieee80211_channel {
enum ieee80211_band band;
@@ -145,6 +164,8 @@ struct ieee80211_channel {
bool beacon_found;
u32 orig_flags;
int orig_mag, orig_mpwr;
+ enum nl80211_dfs_state dfs_state;
+ unsigned long dfs_state_entered;
};
/**
@@ -535,7 +556,7 @@ struct mac_address {
* struct cfg80211_acl_data - Access control list data
*
* @acl_policy: ACL policy to be applied on the station's
- entry specified by mac_addr
+ * entry specified by mac_addr
* @n_acl_entries: Number of MAC address entries passed
* @mac_addrs: List of MAC addresses of stations to be used for ACL
*/
@@ -568,6 +589,7 @@ struct cfg80211_acl_data {
* @p2p_opp_ps: P2P opportunistic PS
* @acl: ACL configuration used by the drivers which has support for
* MAC address based access control
+ * @radar_required: set if radar detection is required
*/
struct cfg80211_ap_settings {
struct cfg80211_chan_def chandef;
@@ -585,6 +607,7 @@ struct cfg80211_ap_settings {
u8 p2p_ctwindow;
bool p2p_opp_ps;
const struct cfg80211_acl_data *acl;
+ bool radar_required;
};
/**
@@ -603,12 +626,14 @@ enum plink_actions {
/**
* enum station_parameters_apply_mask - station parameter values to apply
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
+ * @STATION_PARAM_APPLY_CAPABILITY: apply new capability
*
* Not all station parameters have in-band "no change" signalling,
* for those that don't these flags will are used.
*/
enum station_parameters_apply_mask {
STATION_PARAM_APPLY_UAPSD = BIT(0),
+ STATION_PARAM_APPLY_CAPABILITY = BIT(1),
};
/**
@@ -639,6 +664,9 @@ enum station_parameters_apply_mask {
* see &enum station_parameters_apply_mask
* @local_pm: local link-specific mesh power save mode (no change when set
* to unknown)
+ * @capability: station capability
+ * @ext_capab: extended capabilities of the station
+ * @ext_capab_len: number of extended capabilities
*/
struct station_parameters {
u8 *supported_rates;
@@ -655,6 +683,9 @@ struct station_parameters {
u8 uapsd_queues;
u8 max_sp;
enum nl80211_mesh_power_mode local_pm;
+ u16 capability;
+ u8 *ext_capab;
+ u8 ext_capab_len;
};
/**
@@ -666,14 +697,16 @@ struct station_parameters {
* @STATION_INFO_INACTIVE_TIME: @inactive_time filled
* @STATION_INFO_RX_BYTES: @rx_bytes filled
* @STATION_INFO_TX_BYTES: @tx_bytes filled
+ * @STATION_INFO_RX_BYTES64: @rx_bytes filled with 64-bit value
+ * @STATION_INFO_TX_BYTES64: @tx_bytes filled with 64-bit value
* @STATION_INFO_LLID: @llid filled
* @STATION_INFO_PLID: @plid filled
* @STATION_INFO_PLINK_STATE: @plink_state filled
* @STATION_INFO_SIGNAL: @signal filled
* @STATION_INFO_TX_BITRATE: @txrate fields are filled
* (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
- * @STATION_INFO_RX_PACKETS: @rx_packets filled
- * @STATION_INFO_TX_PACKETS: @tx_packets filled
+ * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value
+ * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value
* @STATION_INFO_TX_RETRIES: @tx_retries filled
* @STATION_INFO_TX_FAILED: @tx_failed filled
* @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
@@ -714,6 +747,8 @@ enum station_info_flags {
STATION_INFO_LOCAL_PM = 1<<21,
STATION_INFO_PEER_PM = 1<<22,
STATION_INFO_NONPEER_PM = 1<<23,
+ STATION_INFO_RX_BYTES64 = 1<<24,
+ STATION_INFO_TX_BYTES64 = 1<<25,
};
/**
@@ -835,8 +870,8 @@ struct station_info {
u32 filled;
u32 connected_time;
u32 inactive_time;
- u32 rx_bytes;
- u32 tx_bytes;
+ u64 rx_bytes;
+ u64 tx_bytes;
u16 llid;
u16 plid;
u8 plink_state;
@@ -1222,6 +1257,7 @@ struct cfg80211_match_set {
* @n_match_sets: number of match sets
* @wiphy: the wiphy this was for
* @dev: the interface
+ * @scan_start: start time of the scheduled scan
* @channels: channels to scan
* @rssi_thold: don't report scan results below this threshold (in s32 dBm)
*/
@@ -1261,11 +1297,13 @@ enum cfg80211_signal_type {
/**
* struct cfg80211_bss_ie_data - BSS entry IE data
+ * @tsf: TSF contained in the frame that carried these IEs
* @rcu_head: internal use, for freeing
* @len: length of the IEs
* @data: IE data
*/
struct cfg80211_bss_ies {
+ u64 tsf;
struct rcu_head rcu_head;
int len;
u8 data[];
@@ -1279,29 +1317,32 @@ struct cfg80211_bss_ies {
*
* @channel: channel this BSS is on
* @bssid: BSSID of the BSS
- * @tsf: timestamp of last received update
* @beacon_interval: the beacon interval as from the frame
* @capability: the capability field in host byte order
- * @ies: the information elements (Note that there
- * is no guarantee that these are well-formed!); this is a pointer to
- * either the beacon_ies or proberesp_ies depending on whether Probe
- * Response frame has been received
+ * @ies: the information elements (Note that there is no guarantee that these
+ * are well-formed!); this is a pointer to either the beacon_ies or
+ * proberesp_ies depending on whether Probe Response frame has been
+ * received. It is always non-%NULL.
* @beacon_ies: the information elements from the last Beacon frame
+ * (implementation note: if @hidden_beacon_bss is set this struct doesn't
+ * own the beacon_ies, but they're just pointers to the ones from the
+ * @hidden_beacon_bss struct)
* @proberesp_ies: the information elements from the last Probe Response frame
+ * @hidden_beacon_bss: in case this BSS struct represents a probe response from
+ * a BSS that hides the SSID in its beacon, this points to the BSS struct
+ * that holds the beacon data. @beacon_ies is still valid, of course, and
+ * points to the same data as hidden_beacon_bss->beacon_ies in that case.
* @signal: signal strength value (type depends on the wiphy's signal_type)
- * @free_priv: function pointer to free private data
* @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
*/
struct cfg80211_bss {
- u64 tsf;
-
struct ieee80211_channel *channel;
const struct cfg80211_bss_ies __rcu *ies;
const struct cfg80211_bss_ies __rcu *beacon_ies;
const struct cfg80211_bss_ies __rcu *proberesp_ies;
- void (*free_priv)(struct cfg80211_bss *bss);
+ struct cfg80211_bss *hidden_beacon_bss;
s32 signal;
@@ -1403,6 +1444,8 @@ struct cfg80211_assoc_request {
* @ie: Extra IEs to add to Deauthentication frame or %NULL
* @ie_len: Length of ie buffer in octets
* @reason_code: The reason code for the deauthentication
+ * @local_state_change: if set, change local state only and
+ * do not set a deauth frame
*/
struct cfg80211_deauth_request {
const u8 *bssid;
@@ -1564,6 +1607,7 @@ struct cfg80211_pmksa {
* one bit per byte, in same format as nl80211
* @pattern: bytes to match where bitmask is 1
* @pattern_len: length of pattern (in bytes)
+ * @pkt_offset: packet offset (in bytes)
*
* Internal note: @mask and @pattern are allocated in one chunk of
* memory, free @mask only!
@@ -1571,6 +1615,42 @@ struct cfg80211_pmksa {
struct cfg80211_wowlan_trig_pkt_pattern {
u8 *mask, *pattern;
int pattern_len;
+ int pkt_offset;
+};
+
+/**
+ * struct cfg80211_wowlan_tcp - TCP connection parameters
+ *
+ * @sock: (internal) socket for source port allocation
+ * @src: source IP address
+ * @dst: destination IP address
+ * @dst_mac: destination MAC address
+ * @src_port: source port
+ * @dst_port: destination port
+ * @payload_len: data payload length
+ * @payload: data payload buffer
+ * @payload_seq: payload sequence stamping configuration
+ * @data_interval: interval at which to send data packets
+ * @wake_len: wakeup payload match length
+ * @wake_data: wakeup payload match data
+ * @wake_mask: wakeup payload match mask
+ * @tokens_size: length of the tokens buffer
+ * @payload_tok: payload token usage configuration
+ */
+struct cfg80211_wowlan_tcp {
+ struct socket *sock;
+ __be32 src, dst;
+ u16 src_port, dst_port;
+ u8 dst_mac[ETH_ALEN];
+ int payload_len;
+ const u8 *payload;
+ struct nl80211_wowlan_tcp_data_seq payload_seq;
+ u32 data_interval;
+ u32 wake_len;
+ const u8 *wake_data, *wake_mask;
+ u32 tokens_size;
+ /* must be last, variable member */
+ struct nl80211_wowlan_tcp_data_token payload_tok;
};
/**
@@ -1587,16 +1667,49 @@ struct cfg80211_wowlan_trig_pkt_pattern {
* @eap_identity_req: wake up on EAP identity request packet
* @four_way_handshake: wake up on 4-way handshake
* @rfkill_release: wake up when rfkill is released
+ * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h.
+ * NULL if not configured.
*/
struct cfg80211_wowlan {
bool any, disconnect, magic_pkt, gtk_rekey_failure,
eap_identity_req, four_way_handshake,
rfkill_release;
struct cfg80211_wowlan_trig_pkt_pattern *patterns;
+ struct cfg80211_wowlan_tcp *tcp;
int n_patterns;
};
/**
+ * struct cfg80211_wowlan_wakeup - wakeup report
+ * @disconnect: woke up by getting disconnected
+ * @magic_pkt: woke up by receiving magic packet
+ * @gtk_rekey_failure: woke up by GTK rekey failure
+ * @eap_identity_req: woke up by EAP identity request packet
+ * @four_way_handshake: woke up by 4-way handshake
+ * @rfkill_release: woke up by rfkill being released
+ * @pattern_idx: pattern that caused wakeup, -1 if not due to pattern
+ * @packet_present_len: copied wakeup packet data
+ * @packet_len: original wakeup packet length
+ * @packet: The packet causing the wakeup, if any.
+ * @packet_80211: For pattern match, magic packet and other data
+ * frame triggers an 802.3 frame should be reported, for
+ * disconnect due to deauth 802.11 frame. This indicates which
+ * it is.
+ * @tcp_match: TCP wakeup packet received
+ * @tcp_connlost: TCP connection lost or failed to establish
+ * @tcp_nomoretokens: TCP data ran out of tokens
+ */
+struct cfg80211_wowlan_wakeup {
+ bool disconnect, magic_pkt, gtk_rekey_failure,
+ eap_identity_req, four_way_handshake,
+ rfkill_release, packet_80211,
+ tcp_match, tcp_connlost, tcp_nomoretokens;
+ s32 pattern_idx;
+ u32 packet_present_len, packet_len;
+ const void *packet;
+};
+
+/**
* struct cfg80211_gtk_rekey_data - rekey data
* @kek: key encryption key
* @kck: key confirmation key
@@ -1826,6 +1939,8 @@ struct cfg80211_gtk_rekey_data {
* this new list replaces the existing one. Driver has to clear its ACL
* when number of MAC addresses entries is passed as 0. Drivers which
* advertise the support for MAC based ACL have to implement this callback.
+ *
+ * @start_radar_detection: Start radar detection in the driver.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2049,6 +2164,10 @@ struct cfg80211_ops {
int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev,
const struct cfg80211_acl_data *params);
+
+ int (*start_radar_detection)(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct cfg80211_chan_def *chandef);
};
/*
@@ -2245,6 +2364,14 @@ enum wiphy_wowlan_support_flags {
WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7),
};
+struct wiphy_wowlan_tcp_support {
+ const struct nl80211_wowlan_tcp_data_token_feature *tok;
+ u32 data_payload_max;
+ u32 data_interval_max;
+ u32 wake_payload_max;
+ bool seq;
+};
+
/**
* struct wiphy_wowlan_support - WoWLAN support data
* @flags: see &enum wiphy_wowlan_support_flags
@@ -2252,12 +2379,16 @@ enum wiphy_wowlan_support_flags {
* (see nl80211.h for the pattern definition)
* @pattern_max_len: maximum length of each pattern
* @pattern_min_len: minimum length of each pattern
+ * @max_pkt_offset: maximum Rx packet offset
+ * @tcp: TCP wakeup support information
*/
struct wiphy_wowlan_support {
u32 flags;
int n_patterns;
int pattern_max_len;
int pattern_min_len;
+ int max_pkt_offset;
+ const struct wiphy_wowlan_tcp_support *tcp;
};
/**
@@ -2357,6 +2488,14 @@ struct wiphy_wowlan_support {
*
* @max_acl_mac_addrs: Maximum number of MAC addresses that the device
* supports for ACL.
+ *
+ * @extended_capabilities: extended capabilities supported by the driver,
+ * additional capabilities might be supported by userspace; these are
+ * the 802.11 extended capabilities ("Extended Capabilities element")
+ * and are in the same format as in the information element. See
+ * 802.11-2012 8.4.2.29 for the defined fields.
+ * @extended_capabilities_mask: mask of the valid values
+ * @extended_capabilities_len: length of the extended capabilities
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -2423,6 +2562,9 @@ struct wiphy {
*/
u32 probe_resp_offload;
+ const u8 *extended_capabilities, *extended_capabilities_mask;
+ u8 extended_capabilities_len;
+
/* If multiple wiphys are registered and you're handed e.g.
* a regular netdev with assigned ieee80211_ptr, you won't
* know whether it points to a wiphy your driver has registered
@@ -2602,7 +2744,6 @@ struct cfg80211_cached_keys;
* the user-set AP, monitor and WDS channel
* @preset_chan: (private) Used by the internal configuration code to
* track the channel to be used for AP later
- * @preset_chantype: (private) the corresponding channel type
* @bssid: (private) Used by the internal configuration code
* @ssid: (private) Used by the internal configuration code
* @ssid_len: (private) Used by the internal configuration code
@@ -2621,6 +2762,8 @@ struct cfg80211_cached_keys;
* beacons, 0 when not valid
* @address: The address for this device, valid only if @netdev is %NULL
* @p2p_started: true if this is a P2P Device that has been started
+ * @cac_started: true if DFS channel availability check has been started
+ * @cac_start_time: timestamp (jiffies) when the dfs state was entered.
*/
struct wireless_dev {
struct wiphy *wiphy;
@@ -2672,6 +2815,9 @@ struct wireless_dev {
u32 ap_unexpected_nlportid;
+ bool cac_started;
+ unsigned long cac_start_time;
+
#ifdef CONFIG_CFG80211_WEXT
/* wext data */
struct {
@@ -3137,25 +3283,23 @@ cfg80211_get_ibss(struct wiphy *wiphy,
WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
}
-struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
- struct ieee80211_channel *channel,
- const u8 *meshid, size_t meshidlen,
- const u8 *meshcfg);
/**
* cfg80211_ref_bss - reference BSS struct
+ * @wiphy: the wiphy this BSS struct belongs to
* @bss: the BSS struct to reference
*
* Increments the refcount of the given BSS struct.
*/
-void cfg80211_ref_bss(struct cfg80211_bss *bss);
+void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
/**
* cfg80211_put_bss - unref BSS struct
+ * @wiphy: the wiphy this BSS struct belongs to
* @bss: the BSS struct
*
* Decrements the refcount of the given BSS struct.
*/
-void cfg80211_put_bss(struct cfg80211_bss *bss);
+void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
/**
* cfg80211_unlink_bss - unlink BSS from internal data structures
@@ -3663,6 +3807,31 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev,
gfp_t gfp);
/**
+ * cfg80211_radar_event - radar detection event
+ * @wiphy: the wiphy
+ * @chandef: chandef for the current channel
+ * @gfp: context flags
+ *
+ * This function is called when a radar is detected on the current chanenl.
+ */
+void cfg80211_radar_event(struct wiphy *wiphy,
+ struct cfg80211_chan_def *chandef, gfp_t gfp);
+
+/**
+ * cfg80211_cac_event - Channel availability check (CAC) event
+ * @netdev: network device
+ * @event: type of event
+ * @gfp: context flags
+ *
+ * This function is called when a Channel availability check (CAC) is finished
+ * or aborted. This must be called to notify the completion of a CAC process,
+ * also by full-MAC drivers.
+ */
+void cfg80211_cac_event(struct net_device *netdev,
+ enum nl80211_radar_event event, gfp_t gfp);
+
+
+/**
* cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer
* @dev: network device
* @peer: peer's MAC address
@@ -3852,6 +4021,21 @@ int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len,
enum ieee80211_p2p_attr_id attr,
u8 *buf, unsigned int bufsize);
+/**
+ * cfg80211_report_wowlan_wakeup - report wakeup from WoWLAN
+ * @wdev: the wireless device reporting the wakeup
+ * @wakeup: the wakeup report
+ * @gfp: allocation flags
+ *
+ * This function reports that the given device woke up. If it
+ * caused the wakeup, report the reason(s), otherwise you may
+ * pass %NULL as the @wakeup parameter to advertise that something
+ * else caused the wakeup.
+ */
+void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev,
+ struct cfg80211_wowlan_wakeup *wakeup,
+ gfp_t gfp);
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5c98d654fc75..f7eba1300d82 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -147,10 +147,12 @@ struct ieee80211_low_level_stats {
* enum ieee80211_chanctx_change - change flag for channel context
* @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed
* @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed
+ * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed
*/
enum ieee80211_chanctx_change {
IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0),
IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1),
+ IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2),
};
/**
@@ -165,6 +167,7 @@ enum ieee80211_chanctx_change {
* @rx_chains_dynamic: The number of RX chains that must be enabled
* after RTS/CTS handshake to receive SMPS MIMO transmissions;
* this will always be >= @rx_chains_static.
+ * @radar_enabled: whether radar detection is enabled on this channel.
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *), size is determined in hw information.
*/
@@ -173,6 +176,8 @@ struct ieee80211_chanctx_conf {
u8 rx_chains_static, rx_chains_dynamic;
+ bool radar_enabled;
+
u8 drv_priv[0] __aligned(sizeof(void *));
};
@@ -208,6 +213,11 @@ struct ieee80211_chanctx_conf {
* @BSS_CHANGED_TXPOWER: TX power setting changed for this interface
* @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS)
* changed (currently only in P2P client mode, GO mode will be later)
+ * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when
+ * it becomes valid, managed mode only)
+ * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
+ * note that this is only called when it changes after the channel
+ * context had been assigned.
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -230,6 +240,8 @@ enum ieee80211_bss_change {
BSS_CHANGED_PS = 1<<17,
BSS_CHANGED_TXPOWER = 1<<18,
BSS_CHANGED_P2P_PS = 1<<19,
+ BSS_CHANGED_DTIM_PERIOD = 1<<20,
+ BSS_CHANGED_BANDWIDTH = 1<<21,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -271,13 +283,19 @@ enum ieee80211_rssi_event {
* if the hardware cannot handle this it must set the
* IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
* @dtim_period: num of beacons before the next DTIM, for beaconing,
- * valid in station mode only while @assoc is true and if also
- * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
- * @ps_dtim_period)
+ * valid in station mode only if after the driver was notified
+ * with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then.
* @sync_tsf: last beacon's/probe response's TSF timestamp (could be old
- * as it may have been received during scanning long ago)
+ * as it may have been received during scanning long ago). If the
+ * HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can
+ * only come from a beacon, but might not become valid until after
+ * association when a beacon is received (which is notified with the
+ * %BSS_CHANGED_DTIM flag.)
* @sync_device_ts: the device timestamp corresponding to the sync_tsf,
* the driver/device can use this to calculate synchronisation
+ * (see @sync_tsf)
+ * @sync_dtim_count: Only valid when %IEEE80211_HW_TIMING_BEACON_ONLY
+ * is requested, see @sync_tsf/@sync_device_ts.
* @beacon_int: beacon interval
* @assoc_capability: capabilities taken from assoc resp
* @basic_rates: bitmap of basic rates, each bit stands for an
@@ -329,6 +347,7 @@ struct ieee80211_bss_conf {
u16 assoc_capability;
u64 sync_tsf;
u32 sync_device_ts;
+ u8 sync_dtim_count;
u32 basic_rates;
int mcast_rate[IEEE80211_NUM_BANDS];
u16 ht_operation_mode;
@@ -389,6 +408,9 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
* set by rate control algorithms to indicate probe rate, will
* be cleared for fragmented frames (except on the last fragment)
+ * @IEEE80211_TX_INTFL_OFFCHAN_TX_OK: Internal to mac80211. Used to indicate
+ * that a frame can be transmitted while the queues are stopped for
+ * off-channel operation.
* @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
* used to indicate that a pending frame requires TX processing before
* it can be sent out.
@@ -406,6 +428,9 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted
* after TX status because the destination was asleep, it must not
* be modified again (no seqno assignment, crypto, etc.)
+ * @IEEE80211_TX_INTFL_MLME_CONN_TX: This frame was transmitted by the MLME
+ * code for connection establishment, this indicates that its status
+ * should kick the MLME state machine.
* @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211
* MLME command (internal to mac80211 to figure out whether to send TX
* status to user space)
@@ -451,13 +476,14 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_STAT_AMPDU = BIT(10),
IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11),
IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
+ IEEE80211_TX_INTFL_OFFCHAN_TX_OK = BIT(13),
IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
IEEE80211_TX_INTFL_RETRIED = BIT(15),
IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
IEEE80211_TX_CTL_NO_PS_BUFFER = BIT(17),
IEEE80211_TX_CTL_MORE_FRAMES = BIT(18),
IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19),
- /* hole at 20, use later */
+ IEEE80211_TX_INTFL_MLME_CONN_TX = BIT(20),
IEEE80211_TX_INTFL_NL80211_FRAME_TX = BIT(21),
IEEE80211_TX_CTL_LDPC = BIT(22),
IEEE80211_TX_CTL_STBC = BIT(23) | BIT(24),
@@ -950,6 +976,7 @@ enum ieee80211_smps_mode {
*
* @channel: the channel to tune to
* @channel_type: the channel (HT) type
+ * @radar_enabled: whether radar detection is enabled
*
* @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
* (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
@@ -976,6 +1003,7 @@ struct ieee80211_conf {
struct ieee80211_channel *channel;
enum nl80211_channel_type channel_type;
+ bool radar_enabled;
enum ieee80211_smps_mode smps_mode;
};
@@ -1173,6 +1201,24 @@ enum ieee80211_sta_state {
};
/**
+ * enum ieee80211_sta_rx_bandwidth - station RX bandwidth
+ * @IEEE80211_STA_RX_BW_20: station can only receive 20 MHz
+ * @IEEE80211_STA_RX_BW_40: station can receive up to 40 MHz
+ * @IEEE80211_STA_RX_BW_80: station can receive up to 80 MHz
+ * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz
+ * (including 80+80 MHz)
+ *
+ * Implementation note: 20 must be zero to be initialized
+ * correctly, the values must be sorted.
+ */
+enum ieee80211_sta_rx_bandwidth {
+ IEEE80211_STA_RX_BW_20 = 0,
+ IEEE80211_STA_RX_BW_40,
+ IEEE80211_STA_RX_BW_80,
+ IEEE80211_STA_RX_BW_160,
+};
+
+/**
* struct ieee80211_sta - station table entry
*
* A station table entry represents a station we are possibly
@@ -1194,6 +1240,12 @@ enum ieee80211_sta_state {
* @uapsd_queues: bitmap of queues configured for uapsd. Only valid
* if wme is supported.
* @max_sp: max Service Period. Only valid if wme is supported.
+ * @bandwidth: current bandwidth the station can receive with
+ * @rx_nss: in HT/VHT, the maximum number of spatial streams the
+ * station can receive at the moment, changed by operating mode
+ * notifications and capabilities. The value is only valid after
+ * the station moves to associated state.
+ * @smps_mode: current SMPS mode (off, static or dynamic)
*/
struct ieee80211_sta {
u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1204,6 +1256,9 @@ struct ieee80211_sta {
bool wme;
u8 uapsd_queues;
u8 max_sp;
+ u8 rx_nss;
+ enum ieee80211_sta_rx_bandwidth bandwidth;
+ enum ieee80211_smps_mode smps_mode;
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
@@ -1328,9 +1383,9 @@ struct ieee80211_tx_control {
* When this flag is set, signaling beacon-loss will cause an immediate
* change to disassociated state.
*
- * @IEEE80211_HW_NEED_DTIM_PERIOD:
- * This device needs to know the DTIM period for the BSS before
- * associating.
+ * @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC:
+ * This device needs to get data from beacon before association (i.e.
+ * dtim_period).
*
* @IEEE80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports
* per-station GTKs as used by IBSS RSN or during fast transition. If
@@ -1350,10 +1405,6 @@ struct ieee80211_tx_control {
* setup strictly in HW. mac80211 should not attempt to do this in
* software.
*
- * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while
- * being idle (i.e. mac80211 doesn't have to go idle-off during the
- * the scan).
- *
* @IEEE80211_HW_WANT_MONITOR_VIF: The driver would like to be informed of
* a virtual monitor interface when monitor interfaces are the only
* active interfaces.
@@ -1367,9 +1418,8 @@ struct ieee80211_tx_control {
* P2P Interface. This will be honoured even if more than one interface
* is supported.
*
- * @IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL: On this hardware TX BA session
- * should be tear down once BAR frame will not be acked.
- *
+ * @IEEE80211_HW_TIMING_BEACON_ONLY: Use sync timing from beacon frames
+ * only, to allow getting TBTT of a DTIM beacon.
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
@@ -1379,7 +1429,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4,
IEEE80211_HW_SIGNAL_UNSPEC = 1<<5,
IEEE80211_HW_SIGNAL_DBM = 1<<6,
- IEEE80211_HW_NEED_DTIM_PERIOD = 1<<7,
+ IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC = 1<<7,
IEEE80211_HW_SPECTRUM_MGMT = 1<<8,
IEEE80211_HW_AMPDU_AGGREGATION = 1<<9,
IEEE80211_HW_SUPPORTS_PS = 1<<10,
@@ -1396,9 +1446,8 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
IEEE80211_HW_AP_LINK_PS = 1<<22,
IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23,
- IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24,
IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25,
- IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL = 1<<26,
+ IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26,
};
/**
@@ -1683,15 +1732,6 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
* dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS
* enabled whenever user has enabled powersave.
*
- * Some hardware need to toggle a single shared antenna between WLAN and
- * Bluetooth to facilitate co-existence. These types of hardware set
- * limitations on the use of host controlled dynamic powersave whenever there
- * is simultaneous WLAN and Bluetooth traffic. For these types of hardware, the
- * driver may request temporarily going into full power save, in order to
- * enable toggling the antenna between BT and WLAN. If the driver requests
- * disabling dynamic powersave, the @dynamic_ps_timeout value will be
- * temporarily set to zero until the driver re-enables dynamic powersave.
- *
* Driver informs U-APSD client support by enabling
* %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
* uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
@@ -2077,16 +2117,21 @@ enum ieee80211_frame_release_type {
* enum ieee80211_rate_control_changed - flags to indicate what changed
*
* @IEEE80211_RC_BW_CHANGED: The bandwidth that can be used to transmit
- * to this station changed.
+ * to this station changed. The actual bandwidth is in the station
+ * information -- for HT20/40 the IEEE80211_HT_CAP_SUP_WIDTH_20_40
+ * flag changes, for HT and VHT the bandwidth field changes.
* @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed.
* @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer
* changed (in IBSS mode) due to discovering more information about
* the peer.
+ * @IEEE80211_RC_NSS_CHANGED: N_SS (number of spatial streams) was changed
+ * by the peer
*/
enum ieee80211_rate_control_changed {
IEEE80211_RC_BW_CHANGED = BIT(0),
IEEE80211_RC_SMPS_CHANGED = BIT(1),
IEEE80211_RC_SUPP_RATES_CHANGED = BIT(2),
+ IEEE80211_RC_NSS_CHANGED = BIT(3),
};
/**
@@ -2167,6 +2212,18 @@ enum ieee80211_rate_control_changed {
* MAC address of the device going away.
* Hence, this callback must be implemented. It can sleep.
*
+ * @add_interface_debugfs: Drivers can use this callback to add debugfs files
+ * when a vif is added to mac80211. This callback and
+ * @remove_interface_debugfs should be within a CONFIG_MAC80211_DEBUGFS
+ * conditional. @remove_interface_debugfs must be provided for cleanup.
+ * This callback can sleep.
+ *
+ * @remove_interface_debugfs: Remove the debugfs files which were added using
+ * @add_interface_debugfs. This callback must remove all debugfs entries
+ * that were added because mac80211 only removes interface debugfs when the
+ * interface is destroyed, not when it is removed from the driver.
+ * This callback can sleep.
+ *
* @config: Handler for configuration requests. IEEE 802.11 code calls this
* function to change hardware configuration, e.g., channel.
* This function should never fail but returns a negative error code
@@ -2580,6 +2637,12 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct dentry *dir);
+ void (*add_interface_debugfs)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct dentry *dir);
+ void (*remove_interface_debugfs)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct dentry *dir);
#endif
void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum sta_notify_cmd, struct ieee80211_sta *sta);
@@ -3877,6 +3940,8 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif);
* When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and
* %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver
* needs to inform if the connection to the AP has been lost.
+ * The function may also be called if the connection needs to be terminated
+ * for some other reason, even if %IEEE80211_HW_CONNECTION_MONITOR isn't set.
*
* This function will cause immediate change to disassociated state,
* without connection recovery attempts.
@@ -3907,36 +3972,6 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif);
void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
/**
- * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm
- *
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
- *
- * Some hardware require full power save to manage simultaneous BT traffic
- * on the WLAN frequency. Full PSM is required periodically, whenever there are
- * burst of BT traffic. The hardware gets information of BT traffic via
- * hardware co-existence lines, and consequentially requests mac80211 to
- * (temporarily) enter full psm.
- * This function will only temporarily disable dynamic PS, not enable PSM if
- * it was not already enabled.
- * The driver must make sure to re-enable dynamic PS using
- * ieee80211_enable_dyn_ps() if the driver has disabled it.
- *
- */
-void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif);
-
-/**
- * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled
- *
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
- *
- * This function restores dynamic PS after being temporarily disabled via
- * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must
- * be coupled with an eventual call to this function.
- *
- */
-void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif);
-
-/**
* ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
* rssi threshold triggered
*
@@ -3953,6 +3988,13 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
gfp_t gfp);
/**
+ * ieee80211_radar_detected - inform that a radar was detected
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ */
+void ieee80211_radar_detected(struct ieee80211_hw *hw);
+
+/**
* ieee80211_chswitch_done - Complete channel switch process
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @success: make the channel switch successful or not
@@ -4211,4 +4253,16 @@ void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
*/
int ieee80211_ave_rssi(struct ieee80211_vif *vif);
+/**
+ * ieee80211_report_wowlan_wakeup - report WoWLAN wakeup
+ * @vif: virtual interface
+ * @wakeup: wakeup reason(s)
+ * @gfp: allocation flags
+ *
+ * See cfg80211_report_wowlan_wakeup().
+ */
+void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif,
+ struct cfg80211_wowlan_wakeup *wakeup,
+ gfp_t gfp);
+
#endif /* MAC80211_H */