diff options
| author | Hans Verkuil <hverkuil@xs4all.nl> | 2009-04-01 03:15:52 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2009-04-06 21:44:26 -0300 |
| commit | 3ff4ad815c5824ab35375d72ea8fe14fb3230daa (patch) | |
| tree | 58f3b75b5b97f5dbf0bb129423c766c1fa4c86fd /include/media | |
| parent | 940088a16221fa517f5b921266afa8e46f49b784 (diff) | |
| download | linux-3ff4ad815c5824ab35375d72ea8fe14fb3230daa.tar.bz2 | |
V4L/DVB (11377): v4l: increase version numbers of drivers converted to v4l2_subdev.
With all the v4l2_subdev changes that were made to these drivers it is a
good idea to increase the version number of each driver.
It's just the patch level that is increased, except for the zoran and saa7146
drivers where the minor number was increased due to the more substantial
changes that were made to those two drivers.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'include/media')
| -rw-r--r-- | include/media/saa7146.h | 2 | ||||
| -rw-r--r-- | include/media/v4l2-subdev.h | 12 |
2 files changed, 4 insertions, 10 deletions
diff --git a/include/media/saa7146.h b/include/media/saa7146.h index fff4235adae5..7a9f76ecbbbd 100644 --- a/include/media/saa7146.h +++ b/include/media/saa7146.h @@ -18,7 +18,7 @@ #include <linux/vmalloc.h> /* for vmalloc() */ #include <linux/mm.h> /* for vmalloc_to_page() */ -#define SAA7146_VERSION_CODE 0x000500 /* 0.5.0 */ +#define SAA7146_VERSION_CODE 0x000600 /* 0.6.0 */ #define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr))) #define saa7146_read(sxy,adr) readl(sxy->mem+(adr)) diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index b4e48dc3f2ba..df4a76800bd6 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -37,12 +37,6 @@ struct v4l2_decode_vbi_line { u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */ }; -/* s_crystal_freq */ -struct v4l2_crystal_freq { - u32 freq; /* frequency in Hz of the crystal */ - u32 flags; /* device specific flags */ -}; - /* Sub-devices are devices that are connected somehow to the main bridge device. These devices are usually audio/video muxers/encoders/decoders or sensors and webcam controllers. @@ -194,8 +188,8 @@ struct v4l2_subdev_audio_ops { s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. - s_crystal_freq: sets the frequency of the crystal used to generate the - clocks. An extra flags field allows device specific configuration + s_crystal_freq: sets the frequency of the crystal used to generate the + clocks in Hz. An extra flags field allows device specific configuration regarding clock frequency dividers, etc. If not used, then set flags to 0. If the frequency is not supported, then -EINVAL is returned. @@ -207,7 +201,7 @@ struct v4l2_subdev_audio_ops { */ struct v4l2_subdev_video_ops { int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); - int (*s_crystal_freq)(struct v4l2_subdev *sd, struct v4l2_crystal_freq *freq); + int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags); int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line); int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data); |