summaryrefslogtreecommitdiffstats
path: root/include/dt-bindings
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2015-09-24 15:05:45 -0700
committerLinus Walleij <linus.walleij@linaro.org>2015-10-02 04:25:53 -0700
commit69d301fdd19635a39cb2b78e53fdd625b7a27924 (patch)
treea7f75832be1b6d38ee323cd17b761c2da60185ed /include/dt-bindings
parentb8664924e8071b67b99f05b13e669e20104d7709 (diff)
downloadlinux-69d301fdd19635a39cb2b78e53fdd625b7a27924.tar.bz2
gpio: add DT bindings for existing consumer flags
It is customary for GPIO controllers to support open drain/collector and open source/emitter configurations. Add standard GPIO line flags to account for this and augment the documentation to say that these are the most generic bindings. Several people approached me to add new flags to the lines, and this makes sense, but let's first bind up the most common cases before we start to add exotic stuff. Thanks to H. Nikolaus Schaller for ideas on how to encode single-ended wiring such as open drain/source and open collector/emitter. Cc: Tony Lindgren <tony@atomide.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include/dt-bindings')
-rw-r--r--include/dt-bindings/gpio/gpio.h12
1 files changed, 12 insertions, 0 deletions
diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h
index e6b1e0a808ae..c673d2c87c60 100644
--- a/include/dt-bindings/gpio/gpio.h
+++ b/include/dt-bindings/gpio/gpio.h
@@ -9,7 +9,19 @@
#ifndef _DT_BINDINGS_GPIO_GPIO_H
#define _DT_BINDINGS_GPIO_GPIO_H
+/* Bit 0 express polarity */
#define GPIO_ACTIVE_HIGH 0
#define GPIO_ACTIVE_LOW 1
+/* Bit 1 express single-endedness */
+#define GPIO_PUSH_PULL 0
+#define GPIO_SINGLE_ENDED 2
+
+/*
+ * Open Drain/Collector is the combination of single-ended active low,
+ * Open Source/Emitter is the combination of single-ended active high.
+ */
+#define GPIO_OPEN_DRAIN (GPIO_SINGLE_ENDED | GPIO_ACTIVE_LOW)
+#define GPIO_OPEN_SOURCE (GPIO_SINGLE_ENDED | GPIO_ACTIVE_HIGH)
+
#endif