Merge tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This kernel cycle was quite calm when it comes to pin control and
  there is really just one major change, and that is the introduction of
  devm_pinctrl_register() managed resources.

  Apart from that linear development, details below.

  Core changes:

   - Add the devm_pinctrl_register() API and switch all applicable
     drivers to use it, saving lots of lines of code all over the place.

  New drivers:

   - driver for the Broadcom NS2 SoC

   - subdriver for the PXA25x SoCs

   - subdriver for the AMLogic Meson GXBB SoC

  Driver improvements:

   - the Intel Baytrail driver now properly supports pin control

   - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction()
     callback in the GPIO portions

   - continued development and stabilization of several SH-PFC SoC
     subdrivers: r8a7795, r8a7790, r8a7794 etc"

* tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits)
  Revert "pinctrl: tegra: avoid parked_reg and parked_bank"
  pinctrl: meson: Fix eth_tx_en bit index
  pinctrl: tegra: avoid parked_reg and parked_bank
  pinctrl: tegra: Correctly check the supported configuration
  pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC
  pinctrl: rockchip: fix pull setting error for rk3399
  pinctrl: stm32: Implement .pin_config_dbg_show()
  pinctrl: nomadik: hide nmk_gpio_get_mode when unused
  pinctrl: ns2: rename pinctrl_utils_dt_free_map
  pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable
  pinctrl: at91: Make at91_gpio_template const
  pinctrl: baytrail: fix some error handling in debugfs
  pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC
  pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged
  pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove()
  pinctrl: nomadik: implement .get_direction()
  pinctrl: nomadik: use BIT() with offsets consequently
  pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range
  pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration
  pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration
  ...

1 files changed, 154 insertions, 0 deletions

diff --git a/include/dt-bindings/gpio/meson-gxbb-gpio.h b/include/dt-bindings/gpio/meson-gxbb-gpio.h
new file mode 100644
index 000000000000..58654fd7aa1e
--- /dev/null
+++ b/include/dt-bindings/gpio/meson-gxbb-gpio.h
@@ -0,0 +1,154 @@
+/*
+ * GPIO definitions for Amlogic Meson GXBB SoCs
+ *
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _DT_BINDINGS_MESON_GXBB_GPIO_H
+#define _DT_BINDINGS_MESON_GXBB_GPIO_H
+
+#define	GPIOAO_0	0
+#define	GPIOAO_1	1
+#define	GPIOAO_2	2
+#define	GPIOAO_3	3
+#define	GPIOAO_4	4
+#define	GPIOAO_5	5
+#define	GPIOAO_6	6
+#define	GPIOAO_7	7
+#define	GPIOAO_8	8
+#define	GPIOAO_9	9
+#define	GPIOAO_10	10
+#define	GPIOAO_11	11
+#define	GPIOAO_12	12
+#define	GPIOAO_13	13
+
+#define	GPIOZ_0		0
+#define	GPIOZ_1		1
+#define	GPIOZ_2		2
+#define	GPIOZ_3		3
+#define	GPIOZ_4		4
+#define	GPIOZ_5		5
+#define	GPIOZ_6		6
+#define	GPIOZ_7		7
+#define	GPIOZ_8		8
+#define	GPIOZ_9		9
+#define	GPIOZ_10	10
+#define	GPIOZ_11	11
+#define	GPIOZ_12	12
+#define	GPIOZ_13	13
+#define	GPIOZ_14	14
+#define	GPIOZ_15	15
+#define	GPIOH_0		16
+#define	GPIOH_1		17
+#define	GPIOH_2		18
+#define	GPIOH_3		19
+#define	BOOT_0		20
+#define	BOOT_1		21
+#define	BOOT_2		22
+#define	BOOT_3		23
+#define	BOOT_4		24
+#define	BOOT_5		25
+#define	BOOT_6		26
+#define	BOOT_7		27
+#define	BOOT_8		28
+#define	BOOT_9		29
+#define	BOOT_10		30
+#define	BOOT_11		31
+#define	BOOT_12		32
+#define	BOOT_13		33
+#define	BOOT_14		34
+#define	BOOT_15		35
+#define	BOOT_16		36
+#define	BOOT_17		37
+#define	CARD_0		38
+#define	CARD_1		39
+#define	CARD_2		40
+#define	CARD_3		41
+#define	CARD_4		42
+#define	CARD_5		43
+#define	CARD_6		44
+#define	GPIODV_0	45
+#define	GPIODV_1	46
+#define	GPIODV_2	47
+#define	GPIODV_3	48
+#define	GPIODV_4	49
+#define	GPIODV_5	50
+#define	GPIODV_6	51
+#define	GPIODV_7	52
+#define	GPIODV_8	53
+#define	GPIODV_9	54
+#define	GPIODV_10	55
+#define	GPIODV_11	56
+#define	GPIODV_12	57
+#define	GPIODV_13	58
+#define	GPIODV_14	59
+#define	GPIODV_15	60
+#define	GPIODV_16	61
+#define	GPIODV_17	62
+#define	GPIODV_18	63
+#define	GPIODV_19	64
+#define	GPIODV_20	65
+#define	GPIODV_21	66
+#define	GPIODV_22	67
+#define	GPIODV_23	68
+#define	GPIODV_24	69
+#define	GPIODV_25	70
+#define	GPIODV_26	71
+#define	GPIODV_27	72
+#define	GPIODV_28	73
+#define	GPIODV_29	74
+#define	GPIOY_0		75
+#define	GPIOY_1		76
+#define	GPIOY_2		77
+#define	GPIOY_3		78
+#define	GPIOY_4		79
+#define	GPIOY_5		80
+#define	GPIOY_6		81
+#define	GPIOY_7		82
+#define	GPIOY_8		83
+#define	GPIOY_9		84
+#define	GPIOY_10	85
+#define	GPIOY_11	86
+#define	GPIOY_12	87
+#define	GPIOY_13	88
+#define	GPIOY_14	89
+#define	GPIOY_15	90
+#define	GPIOY_16	91
+#define	GPIOX_0		92
+#define	GPIOX_1		93
+#define	GPIOX_2		94
+#define	GPIOX_3		95
+#define	GPIOX_4		96
+#define	GPIOX_5		97
+#define	GPIOX_6		98
+#define	GPIOX_7		99
+#define	GPIOX_8		100
+#define	GPIOX_9		101
+#define	GPIOX_10	102
+#define	GPIOX_11	103
+#define	GPIOX_12	104
+#define	GPIOX_13	105
+#define	GPIOX_14	106
+#define	GPIOX_15	107
+#define	GPIOX_16	108
+#define	GPIOX_17	109
+#define	GPIOX_18	110
+#define	GPIOX_19	111
+#define	GPIOX_20	112
+#define	GPIOX_21	113
+#define	GPIOX_22	114
+#define	GPIOCLK_0	115
+#define	GPIOCLK_1	116
+#define	GPIOCLK_2	117
+#define	GPIOCLK_3	118
+#define	GPIO_TEST_N	119
+
+#endif