summaryrefslogtreecommitdiffstats
path: root/include/drm/drm_dp_helper.h
diff options
context:
space:
mode:
authorAdam Jackson <ajax@redhat.com>2012-09-18 10:58:48 -0400
committerDaniel Vetter <daniel.vetter@ffwll.ch>2012-09-26 14:13:48 +0200
commite89861dfa3ed0d8e9d184becf25aebea14e98372 (patch)
treeb97b45fce35239645424576a33d6da42a4f5ede4 /include/drm/drm_dp_helper.h
parent015b85a067bd9949756e49b01b70c820d31316d7 (diff)
downloadlinux-e89861dfa3ed0d8e9d184becf25aebea14e98372.tar.bz2
drm/dp: Update DPCD defines
Sources: DP, eDP, and DP interop specs, and a VESA slideshow about DP 1.2 for the MST bits. Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Adam Jackson <ajax@redhat.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Diffstat (limited to 'include/drm/drm_dp_helper.h')
-rw-r--r--include/drm/drm_dp_helper.h60
1 files changed, 56 insertions, 4 deletions
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 1744b18c06b3..f9888c3cb955 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -69,16 +69,30 @@
/* 10b = TMDS or HDMI */
/* 11b = Other */
# define DP_FORMAT_CONVERSION (1 << 3)
+# define DP_DETAILED_CAP_INFO_AVAILABLE (1 << 4)
#define DP_MAIN_LINK_CHANNEL_CODING 0x006
#define DP_DOWN_STREAM_PORT_COUNT 0x007
-#define DP_PORT_COUNT_MASK 0x0f
-#define DP_OUI_SUPPORT (1 << 7)
+# define DP_PORT_COUNT_MASK 0x0f
+# define DP_MSA_TIMING_PAR_IGNORED (1 << 6)
+# define DP_OUI_SUPPORT (1 << 7)
+
+#define DP_I2C_SPEED_CAP 0x00c
+# define DP_I2C_SPEED_1K 0x01
+# define DP_I2C_SPEED_5K 0x02
+# define DP_I2C_SPEED_10K 0x04
+# define DP_I2C_SPEED_100K 0x08
+# define DP_I2C_SPEED_400K 0x10
+# define DP_I2C_SPEED_1M 0x20
#define DP_EDP_CONFIGURATION_CAP 0x00d
#define DP_TRAINING_AUX_RD_INTERVAL 0x00e
+/* Multiple stream transport */
+#define DP_MSTM_CAP 0x021
+# define DP_MST_CAP (1 << 0)
+
#define DP_PSR_SUPPORT 0x070
# define DP_PSR_IS_SUPPORTED 1
#define DP_PSR_CAPS 0x071
@@ -93,6 +107,31 @@
# define DP_PSR_SETUP_TIME_MASK (7 << 1)
# define DP_PSR_SETUP_TIME_SHIFT 1
+/*
+ * 0x80-0x8f describe downstream port capabilities, but there are two layouts
+ * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not,
+ * each port's descriptor is one byte wide. If it was set, each port's is
+ * four bytes wide, starting with the one byte from the base info. As of
+ * DP interop v1.1a only VGA defines additional detail.
+ */
+
+/* offset 0 */
+#define DP_DOWNSTREAM_PORT_0 0x80
+# define DP_DS_PORT_TYPE_MASK (7 << 0)
+# define DP_DS_PORT_TYPE_DP 0
+# define DP_DS_PORT_TYPE_VGA 1
+# define DP_DS_PORT_TYPE_DVI 2
+# define DP_DS_PORT_TYPE_HDMI 3
+# define DP_DS_PORT_TYPE_NON_EDID 4
+# define DP_DS_PORT_HPD (1 << 3)
+/* offset 1 for VGA is maximum megapixels per second / 8 */
+/* offset 2 */
+# define DP_DS_VGA_MAX_BPC_MASK (3 << 0)
+# define DP_DS_VGA_8BPC 0
+# define DP_DS_VGA_10BPC 1
+# define DP_DS_VGA_12BPC 2
+# define DP_DS_VGA_16BPC 3
+
/* link configuration */
#define DP_LINK_BW_SET 0x100
# define DP_LINK_BW_1_62 0x06
@@ -148,24 +187,37 @@
#define DP_DOWNSPREAD_CTRL 0x107
# define DP_SPREAD_AMP_0_5 (1 << 4)
+# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7)
#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
# define DP_SET_ANSI_8B10B (1 << 0)
+#define DP_I2C_SPEED_CONTROL_STATUS 0x109
+/* bitmask as for DP_I2C_SPEED_CAP */
+
+#define DP_EDP_CONFIGURATION_SET 0x10a
+
+#define DP_MSTM_CTRL 0x111
+# define DP_MST_EN (1 << 0)
+# define DP_UP_REQ_EN (1 << 1)
+# define DP_UPSTREAM_IS_SRC (1 << 2)
+
#define DP_PSR_EN_CFG 0x170
# define DP_PSR_ENABLE (1 << 0)
# define DP_PSR_MAIN_LINK_ACTIVE (1 << 1)
# define DP_PSR_CRC_VERIFICATION (1 << 2)
# define DP_PSR_FRAME_CAPTURE (1 << 3)
+#define DP_SINK_COUNT 0x200
+# define DP_SINK_COUNT_MASK (31 << 0)
+# define DP_SINK_CP_READY (1 << 6)
+
#define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201
# define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0)
# define DP_AUTOMATED_TEST_REQUEST (1 << 1)
# define DP_CP_IRQ (1 << 2)
# define DP_SINK_SPECIFIC_IRQ (1 << 6)
-#define DP_EDP_CONFIGURATION_SET 0x10a
-
#define DP_LANE0_1_STATUS 0x202
#define DP_LANE2_3_STATUS 0x203
# define DP_LANE_CR_DONE (1 << 0)