summaryrefslogtreecommitdiffstats
path: root/fs/xfs
diff options
context:
space:
mode:
authorDave Chinner <david@fromorbit.com>2016-07-22 14:10:56 +1000
committerDave Chinner <david@fromorbit.com>2016-07-22 14:10:56 +1000
commitf2bdfda9a1c668539bc85baf5625f6f14bc510b1 (patch)
tree18d704e07dda3a8842e84c645f4cbb5fb4859da1 /fs/xfs
parentdc4113d2433e01b06685743552d99573c9d470f3 (diff)
parent72ccbbe154fc307c98153725822be515fc0326d3 (diff)
downloadlinux-f2bdfda9a1c668539bc85baf5625f6f14bc510b1.tar.bz2
Merge branch 'xfs-4.8-misc-fixes-4' into for-next
Diffstat (limited to 'fs/xfs')
-rw-r--r--fs/xfs/libxfs/xfs_da_btree.c59
-rw-r--r--fs/xfs/xfs_aops.c29
-rw-r--r--fs/xfs/xfs_buf_item.c1
-rw-r--r--fs/xfs/xfs_dquot.c1
-rw-r--r--fs/xfs/xfs_dquot_item.c2
-rw-r--r--fs/xfs/xfs_extfree_item.c2
-rw-r--r--fs/xfs/xfs_file.c4
-rw-r--r--fs/xfs/xfs_inode_item.c1
-rw-r--r--fs/xfs/xfs_log_cil.c258
-rw-r--r--fs/xfs/xfs_super.c4
-rw-r--r--fs/xfs/xfs_trans.h1
11 files changed, 259 insertions, 103 deletions
diff --git a/fs/xfs/libxfs/xfs_da_btree.c b/fs/xfs/libxfs/xfs_da_btree.c
index 097bf7717d80..0f1f165f4048 100644
--- a/fs/xfs/libxfs/xfs_da_btree.c
+++ b/fs/xfs/libxfs/xfs_da_btree.c
@@ -356,7 +356,6 @@ xfs_da3_split(
struct xfs_da_state_blk *newblk;
struct xfs_da_state_blk *addblk;
struct xfs_da_intnode *node;
- struct xfs_buf *bp;
int max;
int action = 0;
int error;
@@ -397,7 +396,9 @@ xfs_da3_split(
break;
}
/*
- * Entry wouldn't fit, split the leaf again.
+ * Entry wouldn't fit, split the leaf again. The new
+ * extrablk will be consumed by xfs_da3_node_split if
+ * the node is split.
*/
state->extravalid = 1;
if (state->inleaf) {
@@ -446,6 +447,14 @@ xfs_da3_split(
return 0;
/*
+ * xfs_da3_node_split() should have consumed any extra blocks we added
+ * during a double leaf split in the attr fork. This is guaranteed as
+ * we can't be here if the attr fork only has a single leaf block.
+ */
+ ASSERT(state->extravalid == 0 ||
+ state->path.blk[max].magic == XFS_DIR2_LEAFN_MAGIC);
+
+ /*
* Split the root node.
*/
ASSERT(state->path.active == 0);
@@ -457,43 +466,33 @@ xfs_da3_split(
}
/*
- * Update pointers to the node which used to be block 0 and
- * just got bumped because of the addition of a new root node.
- * There might be three blocks involved if a double split occurred,
- * and the original block 0 could be at any position in the list.
+ * Update pointers to the node which used to be block 0 and just got
+ * bumped because of the addition of a new root node. Note that the
+ * original block 0 could be at any position in the list of blocks in
+ * the tree.
*
- * Note: the magic numbers and sibling pointers are in the same
- * physical place for both v2 and v3 headers (by design). Hence it
- * doesn't matter which version of the xfs_da_intnode structure we use
- * here as the result will be the same using either structure.
+ * Note: the magic numbers and sibling pointers are in the same physical
+ * place for both v2 and v3 headers (by design). Hence it doesn't matter
+ * which version of the xfs_da_intnode structure we use here as the
+ * result will be the same using either structure.
*/
node = oldblk->bp->b_addr;
if (node->hdr.info.forw) {
- if (be32_to_cpu(node->hdr.info.forw) == addblk->blkno) {
- bp = addblk->bp;
- } else {
- ASSERT(state->extravalid);
- bp = state->extrablk.bp;
- }
- node = bp->b_addr;
+ ASSERT(be32_to_cpu(node->hdr.info.forw) == addblk->blkno);
+ node = addblk->bp->b_addr;
node->hdr.info.back = cpu_to_be32(oldblk->blkno);
- xfs_trans_log_buf(state->args->trans, bp,
- XFS_DA_LOGRANGE(node, &node->hdr.info,
- sizeof(node->hdr.info)));
+ xfs_trans_log_buf(state->args->trans, addblk->bp,
+ XFS_DA_LOGRANGE(node, &node->hdr.info,
+ sizeof(node->hdr.info)));
}
node = oldblk->bp->b_addr;
if (node->hdr.info.back) {
- if (be32_to_cpu(node->hdr.info.back) == addblk->blkno) {
- bp = addblk->bp;
- } else {
- ASSERT(state->extravalid);
- bp = state->extrablk.bp;
- }
- node = bp->b_addr;
+ ASSERT(be32_to_cpu(node->hdr.info.back) == addblk->blkno);
+ node = addblk->bp->b_addr;
node->hdr.info.forw = cpu_to_be32(oldblk->blkno);
- xfs_trans_log_buf(state->args->trans, bp,
- XFS_DA_LOGRANGE(node, &node->hdr.info,
- sizeof(node->hdr.info)));
+ xfs_trans_log_buf(state->args->trans, addblk->bp,
+ XFS_DA_LOGRANGE(node, &node->hdr.info,
+ sizeof(node->hdr.info)));
}
addblk->bp = NULL;
return 0;
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index b3682774a07d..ebfde553da38 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -87,6 +87,12 @@ xfs_find_bdev_for_inode(
* We're now finished for good with this page. Update the page state via the
* associated buffer_heads, paying attention to the start and end offsets that
* we need to process on the page.
+ *
+ * Landmine Warning: bh->b_end_io() will call end_page_writeback() on the last
+ * buffer in the IO. Once it does this, it is unsafe to access the bufferhead or
+ * the page at all, as we may be racing with memory reclaim and it can free both
+ * the bufferhead chain and the page as it will see the page as clean and
+ * unused.
*/
static void
xfs_finish_page_writeback(
@@ -95,8 +101,9 @@ xfs_finish_page_writeback(
int error)
{
unsigned int end = bvec->bv_offset + bvec->bv_len - 1;
- struct buffer_head *head, *bh;
+ struct buffer_head *head, *bh, *next;
unsigned int off = 0;
+ unsigned int bsize;
ASSERT(bvec->bv_offset < PAGE_SIZE);
ASSERT((bvec->bv_offset & ((1 << inode->i_blkbits) - 1)) == 0);
@@ -105,15 +112,17 @@ xfs_finish_page_writeback(
bh = head = page_buffers(bvec->bv_page);
+ bsize = bh->b_size;
do {
+ next = bh->b_this_page;
if (off < bvec->bv_offset)
goto next_bh;
if (off > end)
break;
bh->b_end_io(bh, !error);
next_bh:
- off += bh->b_size;
- } while ((bh = bh->b_this_page) != head);
+ off += bsize;
+ } while ((bh = next) != head);
}
/*
@@ -1040,6 +1049,20 @@ xfs_vm_releasepage(
trace_xfs_releasepage(page->mapping->host, page, 0, 0);
+ /*
+ * mm accommodates an old ext3 case where clean pages might not have had
+ * the dirty bit cleared. Thus, it can send actual dirty pages to
+ * ->releasepage() via shrink_active_list(). Conversely,
+ * block_invalidatepage() can send pages that are still marked dirty
+ * but otherwise have invalidated buffers.
+ *
+ * We've historically freed buffers on the latter. Instead, quietly
+ * filter out all dirty pages to avoid spurious buffer state warnings.
+ * This can likely be removed once shrink_active_list() is fixed.
+ */
+ if (PageDirty(page))
+ return 0;
+
xfs_count_page_state(page, &delalloc, &unwritten);
if (WARN_ON_ONCE(delalloc))
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 0337690c88bc..e455f9098d49 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -957,6 +957,7 @@ xfs_buf_item_free(
xfs_buf_log_item_t *bip)
{
xfs_buf_item_free_format(bip);
+ kmem_free(bip->bli_item.li_lv_shadow);
kmem_zone_free(xfs_buf_item_zone, bip);
}
diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
index e0646659ce16..ccb0811963b2 100644
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -74,6 +74,7 @@ xfs_qm_dqdestroy(
{
ASSERT(list_empty(&dqp->q_lru));
+ kmem_free(dqp->q_logitem.qli_item.li_lv_shadow);
mutex_destroy(&dqp->q_qlock);
XFS_STATS_DEC(dqp->q_mount, xs_qm_dquot);
diff --git a/fs/xfs/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c
index 814cff94e78f..2c7a1629e064 100644
--- a/fs/xfs/xfs_dquot_item.c
+++ b/fs/xfs/xfs_dquot_item.c
@@ -370,6 +370,8 @@ xfs_qm_qoffend_logitem_committed(
spin_lock(&ailp->xa_lock);
xfs_trans_ail_delete(ailp, &qfs->qql_item, SHUTDOWN_LOG_IO_ERROR);
+ kmem_free(qfs->qql_item.li_lv_shadow);
+ kmem_free(lip->li_lv_shadow);
kmem_free(qfs);
kmem_free(qfe);
return (xfs_lsn_t)-1;
diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c
index 4aa0153214f9..ab779460ecbf 100644
--- a/fs/xfs/xfs_extfree_item.c
+++ b/fs/xfs/xfs_extfree_item.c
@@ -40,6 +40,7 @@ void
xfs_efi_item_free(
struct xfs_efi_log_item *efip)
{
+ kmem_free(efip->efi_item.li_lv_shadow);
if (efip->efi_format.efi_nextents > XFS_EFI_MAX_FAST_EXTENTS)
kmem_free(efip);
else
@@ -300,6 +301,7 @@ static inline struct xfs_efd_log_item *EFD_ITEM(struct xfs_log_item *lip)
STATIC void
xfs_efd_item_free(struct xfs_efd_log_item *efdp)
{
+ kmem_free(efdp->efd_item.li_lv_shadow);
if (efdp->efd_format.efd_nextents > XFS_EFD_MAX_FAST_EXTENTS)
kmem_free(efdp);
else
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index 0e7432558fc0..35df7576cbab 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -327,7 +327,7 @@ xfs_file_dio_aio_read(
return ret;
}
-STATIC ssize_t
+static noinline ssize_t
xfs_file_dax_read(
struct kiocb *iocb,
struct iov_iter *to)
@@ -706,7 +706,7 @@ out:
return ret;
}
-STATIC ssize_t
+static noinline ssize_t
xfs_file_dax_write(
struct kiocb *iocb,
struct iov_iter *from)
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index a1b07612224c..892c2aced207 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -651,6 +651,7 @@ void
xfs_inode_item_destroy(
xfs_inode_t *ip)
{
+ kmem_free(ip->i_itemp->ili_item.li_lv_shadow);
kmem_zone_free(xfs_ili_zone, ip->i_itemp);
}
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index 5e54e7955ea6..a4ab192e1792 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -78,6 +78,157 @@ xlog_cil_init_post_recovery(
log->l_cilp->xc_ctx->sequence = 1;
}
+static inline int
+xlog_cil_iovec_space(
+ uint niovecs)
+{
+ return round_up((sizeof(struct xfs_log_vec) +
+ niovecs * sizeof(struct xfs_log_iovec)),
+ sizeof(uint64_t));
+}
+
+/*
+ * Allocate or pin log vector buffers for CIL insertion.
+ *
+ * The CIL currently uses disposable buffers for copying a snapshot of the
+ * modified items into the log during a push. The biggest problem with this is
+ * the requirement to allocate the disposable buffer during the commit if:
+ * a) does not exist; or
+ * b) it is too small
+ *
+ * If we do this allocation within xlog_cil_insert_format_items(), it is done
+ * under the xc_ctx_lock, which means that a CIL push cannot occur during
+ * the memory allocation. This means that we have a potential deadlock situation
+ * under low memory conditions when we have lots of dirty metadata pinned in
+ * the CIL and we need a CIL commit to occur to free memory.
+ *
+ * To avoid this, we need to move the memory allocation outside the
+ * xc_ctx_lock, but because the log vector buffers are disposable, that opens
+ * up a TOCTOU race condition w.r.t. the CIL committing and removing the log
+ * vector buffers between the check and the formatting of the item into the
+ * log vector buffer within the xc_ctx_lock.
+ *
+ * Because the log vector buffer needs to be unchanged during the CIL push
+ * process, we cannot share the buffer between the transaction commit (which
+ * modifies the buffer) and the CIL push context that is writing the changes
+ * into the log. This means skipping preallocation of buffer space is
+ * unreliable, but we most definitely do not want to be allocating and freeing
+ * buffers unnecessarily during commits when overwrites can be done safely.
+ *
+ * The simplest solution to this problem is to allocate a shadow buffer when a
+ * log item is committed for the second time, and then to only use this buffer
+ * if necessary. The buffer can remain attached to the log item until such time
+ * it is needed, and this is the buffer that is reallocated to match the size of
+ * the incoming modification. Then during the formatting of the item we can swap
+ * the active buffer with the new one if we can't reuse the existing buffer. We
+ * don't free the old buffer as it may be reused on the next modification if
+ * it's size is right, otherwise we'll free and reallocate it at that point.
+ *
+ * This function builds a vector for the changes in each log item in the
+ * transaction. It then works out the length of the buffer needed for each log
+ * item, allocates them and attaches the vector to the log item in preparation
+ * for the formatting step which occurs under the xc_ctx_lock.
+ *
+ * While this means the memory footprint goes up, it avoids the repeated
+ * alloc/free pattern that repeated modifications of an item would otherwise
+ * cause, and hence minimises the CPU overhead of such behaviour.
+ */
+static void
+xlog_cil_alloc_shadow_bufs(
+ struct xlog *log,
+ struct xfs_trans *tp)
+{
+ struct xfs_log_item_desc *lidp;
+
+ list_for_each_entry(lidp, &tp->t_items, lid_trans) {
+ struct xfs_log_item *lip = lidp->lid_item;
+ struct xfs_log_vec *lv;
+ int niovecs = 0;
+ int nbytes = 0;
+ int buf_size;
+ bool ordered = false;
+
+ /* Skip items which aren't dirty in this transaction. */
+ if (!(lidp->lid_flags & XFS_LID_DIRTY))
+ continue;
+
+ /* get number of vecs and size of data to be stored */
+ lip->li_ops->iop_size(lip, &niovecs, &nbytes);
+
+ /*
+ * Ordered items need to be tracked but we do not wish to write
+ * them. We need a logvec to track the object, but we do not
+ * need an iovec or buffer to be allocated for copying data.
+ */
+ if (niovecs == XFS_LOG_VEC_ORDERED) {
+ ordered = true;
+ niovecs = 0;
+ nbytes = 0;
+ }
+
+ /*
+ * We 64-bit align the length of each iovec so that the start
+ * of the next one is naturally aligned. We'll need to
+ * account for that slack space here. Then round nbytes up
+ * to 64-bit alignment so that the initial buffer alignment is
+ * easy to calculate and verify.
+ */
+ nbytes += niovecs * sizeof(uint64_t);
+ nbytes = round_up(nbytes, sizeof(uint64_t));
+
+ /*
+ * The data buffer needs to start 64-bit aligned, so round up
+ * that space to ensure we can align it appropriately and not
+ * overrun the buffer.
+ */
+ buf_size = nbytes + xlog_cil_iovec_space(niovecs);
+
+ /*
+ * if we have no shadow buffer, or it is too small, we need to
+ * reallocate it.
+ */
+ if (!lip->li_lv_shadow ||
+ buf_size > lip->li_lv_shadow->lv_size) {
+
+ /*
+ * We free and allocate here as a realloc would copy
+ * unecessary data. We don't use kmem_zalloc() for the
+ * same reason - we don't need to zero the data area in
+ * the buffer, only the log vector header and the iovec
+ * storage.
+ */
+ kmem_free(lip->li_lv_shadow);
+
+ lv = kmem_alloc(buf_size, KM_SLEEP|KM_NOFS);
+ memset(lv, 0, xlog_cil_iovec_space(niovecs));
+
+ lv->lv_item = lip;
+ lv->lv_size = buf_size;
+ if (ordered)
+ lv->lv_buf_len = XFS_LOG_VEC_ORDERED;
+ else
+ lv->lv_iovecp = (struct xfs_log_iovec *)&lv[1];
+ lip->li_lv_shadow = lv;
+ } else {
+ /* same or smaller, optimise common overwrite case */
+ lv = lip->li_lv_shadow;
+ if (ordered)
+ lv->lv_buf_len = XFS_LOG_VEC_ORDERED;
+ else
+ lv->lv_buf_len = 0;
+ lv->lv_bytes = 0;
+ lv->lv_next = NULL;
+ }
+
+ /* Ensure the lv is set up according to ->iop_size */
+ lv->lv_niovecs = niovecs;
+
+ /* The allocated data region lies beyond the iovec region */
+ lv->lv_buf = (char *)lv + xlog_cil_iovec_space(niovecs);
+ }
+
+}
+
/*
* Prepare the log item for insertion into the CIL. Calculate the difference in
* log space and vectors it will consume, and if it is a new item pin it as
@@ -100,16 +251,19 @@ xfs_cil_prepare_item(
/*
* If there is no old LV, this is the first time we've seen the item in
* this CIL context and so we need to pin it. If we are replacing the
- * old_lv, then remove the space it accounts for and free it.
+ * old_lv, then remove the space it accounts for and make it the shadow
+ * buffer for later freeing. In both cases we are now switching to the
+ * shadow buffer, so update the the pointer to it appropriately.
*/
- if (!old_lv)
+ if (!old_lv) {
lv->lv_item->li_ops->iop_pin(lv->lv_item);
- else if (old_lv != lv) {
+ lv->lv_item->li_lv_shadow = NULL;
+ } else if (old_lv != lv) {
ASSERT(lv->lv_buf_len != XFS_LOG_VEC_ORDERED);
*diff_len -= old_lv->lv_bytes;
*diff_iovecs -= old_lv->lv_niovecs;
- kmem_free(old_lv);
+ lv->lv_item->li_lv_shadow = old_lv;
}
/* attach new log vector to log item */
@@ -133,11 +287,13 @@ xfs_cil_prepare_item(
* write it out asynchronously without needing to relock the object that was
* modified at the time it gets written into the iclog.
*
- * This function builds a vector for the changes in each log item in the
- * transaction. It then works out the length of the buffer needed for each log
- * item, allocates them and formats the vector for the item into the buffer.
- * The buffer is then attached to the log item are then inserted into the
- * Committed Item List for tracking until the next checkpoint is written out.
+ * This function takes the prepared log vectors attached to each log item, and
+ * formats the changes into the log vector buffer. The buffer it uses is
+ * dependent on the current state of the vector in the CIL - the shadow lv is
+ * guaranteed to be large enough for the current modification, but we will only
+ * use that if we can't reuse the existing lv. If we can't reuse the existing
+ * lv, then simple swap it out for the shadow lv. We don't free it - that is
+ * done lazily either by th enext modification or the freeing of the log item.
*
* We don't set up region headers during this process; we simply copy the
* regions into the flat buffer. We can do this because we still have to do a
@@ -170,59 +326,29 @@ xlog_cil_insert_format_items(
list_for_each_entry(lidp, &tp->t_items, lid_trans) {
struct xfs_log_item *lip = lidp->lid_item;
struct xfs_log_vec *lv;
- struct xfs_log_vec *old_lv;
- int niovecs = 0;
- int nbytes = 0;
- int buf_size;
+ struct xfs_log_vec *old_lv = NULL;
+ struct xfs_log_vec *shadow;
bool ordered = false;
/* Skip items which aren't dirty in this transaction. */
if (!(lidp->lid_flags & XFS_LID_DIRTY))
continue;
- /* get number of vecs and size of data to be stored */
- lip->li_ops->iop_size(lip, &niovecs, &nbytes);
-
- /* Skip items that do not have any vectors for writing */
- if (!niovecs)
- continue;
-
/*
- * Ordered items need to be tracked but we do not wish to write
- * them. We need a logvec to track the object, but we do not
- * need an iovec or buffer to be allocated for copying data.
+ * The formatting size information is already attached to
+ * the shadow lv on the log item.
*/
- if (niovecs == XFS_LOG_VEC_ORDERED) {
+ shadow = lip->li_lv_shadow;
+ if (shadow->lv_buf_len == XFS_LOG_VEC_ORDERED)
ordered = true;
- niovecs = 0;
- nbytes = 0;
- }
- /*
- * We 64-bit align the length of each iovec so that the start
- * of the next one is naturally aligned. We'll need to
- * account for that slack space here. Then round nbytes up
- * to 64-bit alignment so that the initial buffer alignment is
- * easy to calculate and verify.
- */
- nbytes += niovecs * sizeof(uint64_t);
- nbytes = round_up(nbytes, sizeof(uint64_t));
-
- /* grab the old item if it exists for reservation accounting */
- old_lv = lip->li_lv;
-
- /*
- * The data buffer needs to start 64-bit aligned, so round up
- * that space to ensure we can align it appropriately and not
- * overrun the buffer.
- */
- buf_size = nbytes +
- round_up((sizeof(struct xfs_log_vec) +
- niovecs * sizeof(struct xfs_log_iovec)),
- sizeof(uint64_t));
+ /* Skip items that do not have any vectors for writing */
+ if (!shadow->lv_niovecs && !ordered)
+ continue;
/* compare to existing item size */
- if (lip->li_lv && buf_size <= lip->li_lv->lv_size) {
+ old_lv = lip->li_lv;
+ if (lip->li_lv && shadow->lv_size <= lip->li_lv->lv_size) {
/* same or smaller, optimise common overwrite case */
lv = lip->li_lv;
lv->lv_next = NULL;
@@ -236,32 +362,29 @@ xlog_cil_insert_format_items(
*/
*diff_iovecs -= lv->lv_niovecs;
*diff_len -= lv->lv_bytes;
+
+ /* Ensure the lv is set up according to ->iop_size */
+ lv->lv_niovecs = shadow->lv_niovecs;
+
+ /* reset the lv buffer information for new formatting */
+ lv->lv_buf_len = 0;
+ lv->lv_bytes = 0;
+ lv->lv_buf = (char *)lv +
+ xlog_cil_iovec_space(lv->lv_niovecs);
} else {
- /* allocate new data chunk */
- lv = kmem_zalloc(buf_size, KM_SLEEP|KM_NOFS);
+ /* switch to shadow buffer! */
+ lv = shadow;
lv->lv_item = lip;
- lv->lv_size = buf_size;
if (ordered) {
/* track as an ordered logvec */
ASSERT(lip->li_lv == NULL);
- lv->lv_buf_len = XFS_LOG_VEC_ORDERED;
goto insert;
}
- lv->lv_iovecp = (struct xfs_log_iovec *)&lv[1];
}
- /* Ensure the lv is set up according to ->iop_size */
- lv->lv_niovecs = niovecs;
-
- /* The allocated data region lies beyond the iovec region */
- lv->lv_buf_len = 0;
- lv->lv_bytes = 0;
- lv->lv_buf = (char *)lv + buf_size - nbytes;
ASSERT(IS_ALIGNED((unsigned long)lv->lv_buf, sizeof(uint64_t)));
-
lip->li_ops->iop_format(lip, lv);
insert:
- ASSERT(lv->lv_buf_len <= nbytes);
xfs_cil_prepare_item(log, lv, old_lv, diff_len, diff_iovecs);
}
}
@@ -783,6 +906,13 @@ xfs_log_commit_cil(
struct xlog *log = mp->m_log;
struct xfs_cil *cil = log->l_cilp;
+ /*
+ * Do all necessary memory allocation before we lock the CIL.
+ * This ensures the allocation does not deadlock with a CIL
+ * push in memory reclaim (e.g. from kswapd).
+ */
+ xlog_cil_alloc_shadow_bufs(log, tp);
+
/* lock out background commit */
down_read(&cil->xc_ctx_lock);
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 258b594f5e61..0303f1005f88 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1573,10 +1573,6 @@ xfs_fs_fill_super(
}
}
- if (xfs_sb_version_hassparseinodes(&mp->m_sb))
- xfs_alert(mp,
- "EXPERIMENTAL sparse inode feature enabled. Use at your own risk!");
-
error = xfs_mountfs(mp);
if (error)
goto out_filestream_unmount;
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 9a462e892e4f..9b2b9fa89331 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -52,6 +52,7 @@ typedef struct xfs_log_item {
/* delayed logging */
struct list_head li_cil; /* CIL pointers */
struct xfs_log_vec *li_lv; /* active log vector */
+ struct xfs_log_vec *li_lv_shadow; /* standby vector */
xfs_lsn_t li_seq; /* CIL commit seq */
} xfs_log_item_t;