summaryrefslogtreecommitdiffstats
path: root/fs/sysfs/file.c
diff options
context:
space:
mode:
authorTejun Heo <tj@kernel.org>2013-10-01 17:42:02 -0400
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-10-05 17:21:03 -0700
commit13c589d5b0ac654d9da7e490a2dd548e6b86b4a5 (patch)
treef78d4c8dc6111601655d0782fad28a3c3ad6af3c /fs/sysfs/file.c
parent8ef445f0807457dd7d158e43d9e8f9568c47910d (diff)
downloadlinux-13c589d5b0ac654d9da7e490a2dd548e6b86b4a5.tar.bz2
sysfs: use seq_file when reading regular files
sysfs read path implements its own buffering scheme between userland and kernel callbacks, which essentially is a degenerate duplicate of seq_file. This patch replaces the custom read buffering implementation in sysfs with seq_file. While the amount of code reduction is small, this reduces low level hairiness and enables future development of a new versatile API based on seq_file so that sysfs features can be shared with other subsystems. As write path was already converted to not use sysfs_open_file->page, this patch makes ->page and ->count unused and removes them. Userland behavior remains the same except for some extreme corner cases - e.g. sysfs will now regenerate the content each time a file is read after a non-contiguous seek whereas the original code would keep using the same content. While this is a userland visible behavior change, it is extremely unlikely to be noticeable and brings sysfs behavior closer to that of procfs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'fs/sysfs/file.c')
-rw-r--r--fs/sysfs/file.c164
1 files changed, 73 insertions, 91 deletions
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 53cc096e6a1b..4921bda3a37a 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -21,6 +21,7 @@
#include <linux/mutex.h>
#include <linux/limits.h>
#include <linux/uaccess.h>
+#include <linux/seq_file.h>
#include "sysfs.h"
@@ -31,7 +32,8 @@
* sysfs_dirent->s_attr.open points to sysfs_open_dirent. s_attr.open is
* protected by sysfs_open_dirent_lock.
*
- * filp->private_data points to sysfs_open_file which is chained at
+ * filp->private_data points to seq_file whose ->private points to
+ * sysfs_open_file. sysfs_open_files are chained at
* sysfs_open_dirent->files, which is protected by sysfs_open_file_mutex.
*/
static DEFINE_SPINLOCK(sysfs_open_dirent_lock);
@@ -47,13 +49,16 @@ struct sysfs_open_dirent {
struct sysfs_open_file {
struct sysfs_dirent *sd;
struct file *file;
- size_t count;
- char *page;
struct mutex mutex;
int event;
struct list_head list;
};
+static struct sysfs_open_file *sysfs_of(struct file *file)
+{
+ return ((struct seq_file *)file->private_data)->private;
+}
+
/*
* Determine ktype->sysfs_ops for the given sysfs_dirent. This function
* must be called while holding an active reference.
@@ -66,40 +71,54 @@ static const struct sysfs_ops *sysfs_file_ops(struct sysfs_dirent *sd)
return kobj->ktype ? kobj->ktype->sysfs_ops : NULL;
}
-/**
- * fill_read_buffer - allocate and fill buffer from object.
- * @dentry: dentry pointer.
- * @buffer: data buffer for file.
- *
- * Allocate @buffer->page, if it hasn't been already, then call the
- * kobject's show() method to fill the buffer with this attribute's
- * data.
- * This is called only once, on the file's first read unless an error
- * is returned.
+/*
+ * Reads on sysfs are handled through seq_file, which takes care of hairy
+ * details like buffering and seeking. The following function pipes
+ * sysfs_ops->show() result through seq_file.
*/
-static int fill_read_buffer(struct dentry *dentry, struct sysfs_open_file *of)
+static int sysfs_seq_show(struct seq_file *sf, void *v)
{
- struct sysfs_dirent *attr_sd = dentry->d_fsdata;
- struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
+ struct sysfs_open_file *of = sf->private;
+ struct kobject *kobj = of->sd->s_parent->s_dir.kobj;
const struct sysfs_ops *ops;
- int ret = 0;
+ char *buf;
ssize_t count;
- if (!of->page)
- of->page = (char *) get_zeroed_page(GFP_KERNEL);
- if (!of->page)
- return -ENOMEM;
+ /* acquire buffer and ensure that it's >= PAGE_SIZE */
+ count = seq_get_buf(sf, &buf);
+ if (count < PAGE_SIZE) {
+ seq_commit(sf, -1);
+ return 0;
+ }
- /* need attr_sd for attr and ops, its parent for kobj */
- if (!sysfs_get_active(attr_sd))
+ /*
+ * Need @of->sd for attr and ops, its parent for kobj. @of->mutex
+ * nests outside active ref and is just to ensure that the ops
+ * aren't called concurrently for the same open file.
+ */
+ mutex_lock(&of->mutex);
+ if (!sysfs_get_active(of->sd)) {
+ mutex_unlock(&of->mutex);
return -ENODEV;
+ }
- of->event = atomic_read(&attr_sd->s_attr.open->event);
+ of->event = atomic_read(&of->sd->s_attr.open->event);
- ops = sysfs_file_ops(attr_sd);
- count = ops->show(kobj, attr_sd->s_attr.attr, of->page);
+ /*
+ * Lookup @ops and invoke show(). Control may reach here via seq
+ * file lseek even if @ops->show() isn't implemented.
+ */
+ ops = sysfs_file_ops(of->sd);
+ if (ops->show)
+ count = ops->show(kobj, of->sd->s_attr.attr, buf);
+ else
+ count = 0;
- sysfs_put_active(attr_sd);
+ sysfs_put_active(of->sd);
+ mutex_unlock(&of->mutex);
+
+ if (count < 0)
+ return count;
/*
* The code works fine with PAGE_SIZE return but it's likely to
@@ -111,54 +130,8 @@ static int fill_read_buffer(struct dentry *dentry, struct sysfs_open_file *of)
/* Try to struggle along */
count = PAGE_SIZE - 1;
}
- if (count >= 0)
- of->count = count;
- else
- ret = count;
- return ret;
-}
-
-/**
- * sysfs_read_file - read an attribute.
- * @file: file pointer.
- * @buf: buffer to fill.
- * @count: number of bytes to read.
- * @ppos: starting offset in file.
- *
- * Userspace wants to read an attribute file. The attribute descriptor
- * is in the file's ->d_fsdata. The target object is in the directory's
- * ->d_fsdata.
- *
- * We call fill_read_buffer() to allocate and fill the buffer from the
- * object's show() method exactly once (if the read is happening from
- * the beginning of the file). That should fill the entire buffer with
- * all the data the object has to offer for that attribute.
- * We then call flush_read_buffer() to copy the buffer to userspace
- * in the increments specified.
- */
-
-static ssize_t
-sysfs_read_file(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-{
- struct sysfs_open_file *of = file->private_data;
- ssize_t retval = 0;
-
- mutex_lock(&of->mutex);
- /*
- * Fill on zero offset and the first read so that silly things like
- * "dd bs=1 skip=N" can work on sysfs files.
- */
- if (*ppos == 0 || !of->page) {
- retval = fill_read_buffer(file->f_path.dentry, of);
- if (retval)
- goto out;
- }
- pr_debug("%s: count = %zd, ppos = %lld, buf = %s\n",
- __func__, count, *ppos, of->page);
- retval = simple_read_from_buffer(buf, count, ppos, of->page, of->count);
-out:
- mutex_unlock(&of->mutex);
- return retval;
+ seq_commit(sf, count);
+ return 0;
}
/**
@@ -216,7 +189,7 @@ static int flush_write_buffer(struct sysfs_open_file *of, char *buf,
static ssize_t sysfs_write_file(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
- struct sysfs_open_file *of = file->private_data;
+ struct sysfs_open_file *of = sysfs_of(file);
ssize_t len = min_t(size_t, count, PAGE_SIZE - 1);
char *buf;
@@ -364,10 +337,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
goto err_out;
}
- /*
- * No error? Great, allocate a sysfs_open_file for the file, and
- * store it it in file->private_data for easy access.
- */
+ /* allocate a sysfs_open_file for the file */
error = -ENOMEM;
of = kzalloc(sizeof(struct sysfs_open_file), GFP_KERNEL);
if (!of)
@@ -376,20 +346,34 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
mutex_init(&of->mutex);
of->sd = attr_sd;
of->file = file;
- file->private_data = of;
+
+ /*
+ * Always instantiate seq_file even if read access is not
+ * implemented or requested. This unifies private data access and
+ * most files are readable anyway.
+ */
+ error = single_open(file, sysfs_seq_show, of);
+ if (error)
+ goto err_free;
+
+ /* seq_file clears PWRITE unconditionally, restore it if WRITE */
+ if (file->f_mode & FMODE_WRITE)
+ file->f_mode |= FMODE_PWRITE;
/* make sure we have open dirent struct */
error = sysfs_get_open_dirent(attr_sd, of);
if (error)
- goto err_free;
+ goto err_close;
/* open succeeded, put active references */
sysfs_put_active(attr_sd);
return 0;
- err_free:
+err_close:
+ single_release(inode, file);
+err_free:
kfree(of);
- err_out:
+err_out:
sysfs_put_active(attr_sd);
return error;
}
@@ -397,12 +381,10 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
static int sysfs_release(struct inode *inode, struct file *filp)
{
struct sysfs_dirent *sd = filp->f_path.dentry->d_fsdata;
- struct sysfs_open_file *of = filp->private_data;
+ struct sysfs_open_file *of = sysfs_of(filp);
sysfs_put_open_dirent(sd, of);
-
- if (of->page)
- free_page((unsigned long)of->page);
+ single_release(inode, filp);
kfree(of);
return 0;
@@ -423,7 +405,7 @@ static int sysfs_release(struct inode *inode, struct file *filp)
*/
static unsigned int sysfs_poll(struct file *filp, poll_table *wait)
{
- struct sysfs_open_file *of = filp->private_data;
+ struct sysfs_open_file *of = sysfs_of(filp);
struct sysfs_dirent *attr_sd = filp->f_path.dentry->d_fsdata;
struct sysfs_open_dirent *od = attr_sd->s_attr.open;
@@ -481,9 +463,9 @@ void sysfs_notify(struct kobject *k, const char *dir, const char *attr)
EXPORT_SYMBOL_GPL(sysfs_notify);
const struct file_operations sysfs_file_operations = {
- .read = sysfs_read_file,
+ .read = seq_read,
.write = sysfs_write_file,
- .llseek = generic_file_llseek,
+ .llseek = seq_lseek,
.open = sysfs_open_file,
.release = sysfs_release,
.poll = sysfs_poll,