scsi: fs: remove exofs

This was an example for using the SCSI OSD protocol, which we're trying
to remove.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 0 insertions, 262 deletions

diff --git a/fs/exofs/common.h b/fs/exofs/common.h
deleted file mode 100644
index 7d88ef566213..000000000000
--- a/fs/exofs/common.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * common.h - Common definitions for both Kernel and user-mode utilities
- *
- * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com)
- * Copyright (C) 2008, 2009
- * Boaz Harrosh <ooo@electrozaur.com>
- *
- * Copyrights for code taken from ext2:
- *     Copyright (C) 1992, 1993, 1994, 1995
- *     Remy Card (card@masi.ibp.fr)
- *     Laboratoire MASI - Institut Blaise Pascal
- *     Universite Pierre et Marie Curie (Paris VI)
- *     from
- *     linux/fs/minix/inode.c
- *     Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is part of exofs.
- *
- * exofs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.  Since it is based on ext2, and the only
- * valid version of GPL for the Linux kernel is version 2, the only valid
- * version of GPL for exofs is version 2.
- *
- * exofs is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with exofs; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __EXOFS_COM_H__
-#define __EXOFS_COM_H__
-
-#include <linux/types.h>
-
-#include <scsi/osd_attributes.h>
-#include <scsi/osd_initiator.h>
-#include <scsi/osd_sec.h>
-
-/****************************************************************************
- * Object ID related defines
- * NOTE: inode# = object ID - EXOFS_OBJ_OFF
- ****************************************************************************/
-#define EXOFS_MIN_PID   0x10000	/* Smallest partition ID */
-#define EXOFS_OBJ_OFF	0x10000	/* offset for objects */
-#define EXOFS_SUPER_ID	0x10000	/* object ID for on-disk superblock */
-#define EXOFS_DEVTABLE_ID 0x10001 /* object ID for on-disk device table */
-#define EXOFS_ROOT_ID	0x10002	/* object ID for root directory */
-
-/* exofs Application specific page/attribute */
-/* Inode attrs */
-# define EXOFS_APAGE_FS_DATA	(OSD_APAGE_APP_DEFINED_FIRST + 3)
-# define EXOFS_ATTR_INODE_DATA	1
-# define EXOFS_ATTR_INODE_FILE_LAYOUT	2
-# define EXOFS_ATTR_INODE_DIR_LAYOUT	3
-/* Partition attrs */
-# define EXOFS_APAGE_SB_DATA	(0xF0000000U + 3)
-# define EXOFS_ATTR_SB_STATS	1
-
-/*
- * The maximum number of files we can have is limited by the size of the
- * inode number.  This is the largest object ID that the file system supports.
- * Object IDs 0, 1, and 2 are always in use (see above defines).
- */
-enum {
-	EXOFS_MAX_INO_ID = (sizeof(ino_t) * 8 == 64) ? ULLONG_MAX :
-					(1ULL << (sizeof(ino_t) * 8ULL - 1ULL)),
-	EXOFS_MAX_ID	 = (EXOFS_MAX_INO_ID - 1 - EXOFS_OBJ_OFF),
-};
-
-/****************************************************************************
- * Misc.
- ****************************************************************************/
-#define EXOFS_BLKSHIFT	12
-#define EXOFS_BLKSIZE	(1UL << EXOFS_BLKSHIFT)
-
-/****************************************************************************
- * superblock-related things
- ****************************************************************************/
-#define EXOFS_SUPER_MAGIC	0x5DF5
-
-/*
- * The file system control block - stored in object EXOFS_SUPER_ID's data.
- * This is where the in-memory superblock is stored on disk.
- */
-enum {EXOFS_FSCB_VER = 1, EXOFS_DT_VER = 1};
-struct exofs_fscb {
-	__le64  s_nextid;	/* Only used after mkfs */
-	__le64  s_numfiles;	/* Only used after mkfs */
-	__le32	s_version;	/* == EXOFS_FSCB_VER */
-	__le16  s_magic;	/* Magic signature */
-	__le16  s_newfs;	/* Non-zero if this is a new fs */
-
-	/* From here on it's a static part, only written by mkexofs */
-	__le64	s_dev_table_oid;   /* Resurved, not used */
-	__le64	s_dev_table_count; /* == 0 means no dev_table */
-} __packed;
-
-/*
- * This struct is set on the FS partition's attributes.
- * [EXOFS_APAGE_SB_DATA, EXOFS_ATTR_SB_STATS] and is written together
- * with the create command, to atomically persist the sb writeable information.
- */
-struct exofs_sb_stats {
-	__le64  s_nextid;	/* Highest object ID used */
-	__le64  s_numfiles;	/* Number of files on fs */
-} __packed;
-
-/*
- * Describes the raid used in the FS. It is part of the device table.
- * This here is taken from the pNFS-objects definition. In exofs we
- * use one raid policy through-out the filesystem. (NOTE: the funny
- * alignment at beginning. We take care of it at exofs_device_table.
- */
-struct exofs_dt_data_map {
-	__le32	cb_num_comps;
-	__le64	cb_stripe_unit;
-	__le32	cb_group_width;
-	__le32	cb_group_depth;
-	__le32	cb_mirror_cnt;
-	__le32	cb_raid_algorithm;
-} __packed;
-
-/*
- * This is an osd device information descriptor. It is a single entry in
- * the exofs device table. It describes an osd target lun which
- * contains data belonging to this FS. (Same partition_id on all devices)
- */
-struct exofs_dt_device_info {
-	__le32	systemid_len;
-	u8	systemid[OSD_SYSTEMID_LEN];
-	__le64	long_name_offset;	/* If !0 then offset-in-file */
-	__le32	osdname_len;		/* */
-	u8	osdname[44];		/* Embbeded, Usually an asci uuid */
-} __packed;
-
-/*
- * The EXOFS device table - stored in object EXOFS_DEVTABLE_ID's data.
- * It contains the raid used for this multy-device FS and an array of
- * participating devices.
- */
-struct exofs_device_table {
-	__le32				dt_version;	/* == EXOFS_DT_VER */
-	struct exofs_dt_data_map	dt_data_map;	/* Raid policy to use */
-
-	/* Resurved space For future use. Total includeing this:
-	 * (8 * sizeof(le64))
-	 */
-	__le64				__Resurved[4];
-
-	__le64				dt_num_devices;	/* Array size */
-	struct exofs_dt_device_info	dt_dev_table[];	/* Array of devices */
-} __packed;
-
-/****************************************************************************
- * inode-related things
- ****************************************************************************/
-#define EXOFS_IDATA		5
-
-/*
- * The file control block - stored in an object's attributes.  This is where
- * the in-memory inode is stored on disk.
- */
-struct exofs_fcb {
-	__le64  i_size;			/* Size of the file */
-	__le16  i_mode;         	/* File mode */
-	__le16  i_links_count;  	/* Links count */
-	__le32  i_uid;          	/* Owner Uid */
-	__le32  i_gid;          	/* Group Id */
-	__le32  i_atime;        	/* Access time */
-	__le32  i_ctime;        	/* Creation time */
-	__le32  i_mtime;        	/* Modification time */
-	__le32  i_flags;        	/* File flags (unused for now)*/
-	__le32  i_generation;   	/* File version (for NFS) */
-	__le32  i_data[EXOFS_IDATA];	/* Short symlink names and device #s */
-};
-
-#define EXOFS_INO_ATTR_SIZE	sizeof(struct exofs_fcb)
-
-/* This is the Attribute the fcb is stored in */
-static const struct __weak osd_attr g_attr_inode_data = ATTR_DEF(
-	EXOFS_APAGE_FS_DATA,
-	EXOFS_ATTR_INODE_DATA,
-	EXOFS_INO_ATTR_SIZE);
-
-/****************************************************************************
- * dentry-related things
- ****************************************************************************/
-#define EXOFS_NAME_LEN	255
-
-/*
- * The on-disk directory entry
- */
-struct exofs_dir_entry {
-	__le64		inode_no;		/* inode number           */
-	__le16		rec_len;		/* directory entry length */
-	u8		name_len;		/* name length            */
-	u8		file_type;		/* umm...file type        */
-	char		name[EXOFS_NAME_LEN];	/* file name              */
-};
-
-enum {
-	EXOFS_FT_UNKNOWN,
-	EXOFS_FT_REG_FILE,
-	EXOFS_FT_DIR,
-	EXOFS_FT_CHRDEV,
-	EXOFS_FT_BLKDEV,
-	EXOFS_FT_FIFO,
-	EXOFS_FT_SOCK,
-	EXOFS_FT_SYMLINK,
-	EXOFS_FT_MAX
-};
-
-#define EXOFS_DIR_PAD			4
-#define EXOFS_DIR_ROUND			(EXOFS_DIR_PAD - 1)
-#define EXOFS_DIR_REC_LEN(name_len) \
-	(((name_len) + offsetof(struct exofs_dir_entry, name)  + \
-	  EXOFS_DIR_ROUND) & ~EXOFS_DIR_ROUND)
-
-/*
- * The on-disk (optional) layout structure.
- * sits in an EXOFS_ATTR_INODE_FILE_LAYOUT or EXOFS_ATTR_INODE_DIR_LAYOUT
- * attribute, attached to any inode, usually to a directory.
- */
-
-enum exofs_inode_layout_gen_functions {
-	LAYOUT_MOVING_WINDOW = 0,
-	LAYOUT_IMPLICT = 1,
-};
-
-struct exofs_on_disk_inode_layout {
-	__le16 gen_func; /* One of enum exofs_inode_layout_gen_functions */
-	__le16 pad;
-	union {
-		/* gen_func == LAYOUT_MOVING_WINDOW (default) */
-		struct exofs_layout_sliding_window {
-			__le32 num_devices; /* first n devices in global-table*/
-		} sliding_window __packed;
-
-		/* gen_func == LAYOUT_IMPLICT */
-		struct exofs_layout_implict_list {
-			struct exofs_dt_data_map data_map;
-			/* Variable array of size data_map.cb_num_comps. These
-			 * are device indexes of the devices in the global table
-			 */
-			__le32 dev_indexes[];
-		} implict __packed;
-	};
-} __packed;
-
-static inline size_t exofs_on_disk_inode_layout_size(unsigned max_devs)
-{
-	return sizeof(struct exofs_on_disk_inode_layout) +
-		max_devs * sizeof(__le32);
-}
-
-#endif /*ifndef __EXOFS_COM_H__*/