diff options
| author | Naohiro Aota <naohiro.aota@wdc.com> | 2021-02-04 19:22:05 +0900 |
|---|---|---|
| committer | David Sterba <dsterba@suse.com> | 2021-02-09 02:46:06 +0100 |
| commit | d8e3fb106f393858b90b3befc4f6092a76c86d1c (patch) | |
| tree | 8a4acd4e141e0281d98c2c28e50adda0fa26fdf0 /fs/btrfs/file.c | |
| parent | 24533f6a9ad633d6ff0332844fadafb9ecf4a917 (diff) | |
| download | linux-d8e3fb106f393858b90b3befc4f6092a76c86d1c.tar.bz2 | |
btrfs: zoned: use ZONE_APPEND write for zoned mode
Enable zone append writing for zoned mode. When using zone append, a
bio is issued to the start of a target zone and the device decides to
place it inside the zone. Upon completion the device reports the actual
written position back to the host.
Three parts are necessary to enable zone append mode. First, modify the
bio to use REQ_OP_ZONE_APPEND in btrfs_submit_bio_hook() and adjust the
bi_sector to point the beginning of the zone.
Second, record the returned physical address (and disk/partno) to the
ordered extent in end_bio_extent_writepage() after the bio has been
completed. We cannot resolve the physical address to the logical address
because we can neither take locks nor allocate a buffer in this end_bio
context. So, we need to record the physical address to resolve it later
in btrfs_finish_ordered_io().
And finally, rewrite the logical addresses of the extent mapping and
checksum data according to the physical address using btrfs_rmap_block.
If the returned address matches the originally allocated address, we can
skip this rewriting process.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Diffstat (limited to 'fs/btrfs/file.c')
| -rw-r--r-- | fs/btrfs/file.c | 6 |
1 files changed, 5 insertions, 1 deletions
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index bf52d7e85914..01a72f53fb5d 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2168,8 +2168,12 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync) * commit waits for their completion, to avoid data loss if we fsync, * the current transaction commits before the ordered extents complete * and a power failure happens right after that. + * + * For zoned filesystem, if a write IO uses a ZONE_APPEND command, the + * logical address recorded in the ordered extent may change. We need + * to wait for the IO to stabilize the logical address. */ - if (full_sync) { + if (full_sync || btrfs_is_zoned(fs_info)) { ret = btrfs_wait_ordered_range(inode, start, len); } else { /* |