diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-05 13:23:24 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-05 13:23:24 -0700 |
commit | 8f7be6291529011a58856bf178f52ed5751c68ac (patch) | |
tree | ab0e58a5ff58e6c713e7abfa97c815be1bcc44e4 /drivers | |
parent | 9aebd3254c184fb6c731548b8347193bf882b6f7 (diff) | |
parent | 7f4bc2e8687ecea52177aac30fb153cc076f7022 (diff) | |
download | linux-8f7be6291529011a58856bf178f52ed5751c68ac.tar.bz2 |
Merge tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add a new host cap bit and a corresponding DT property, to support
power cycling of the card by FW at system suspend/resume.
- Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode
- Fix switch to 1/4-bit mode at system suspend/resume for SD-combo
cards
- Convert the mmc-pwrseq DT bindings to the json-schema
- Always allow the card detect uevent to be consumed by userspace
MMC host controllers:
- Convert a few DT bindings to the json-schema
- mtk-sd:
- Add support for command queue through cqhci
- Add support for the MT6779 variant
- renesas_sdhi_internal_dmac:
- Fix dma unmapping in the error path
- sdhci_am654:
- Add support for the AM65x PG2.0 variant
- Extend support for phys/clocks
- sdhci-cadence:
- Drop incorrect HW tuning for SD mode
- sdhci-msm:
- Add support for interconnect bandwidth scaling
- Enable internal voltage control
- Enable low power state for pinctrls
- sdhci-of-at91:
- Ludovic Desroches handovers maintenance to Eugen Hristev
- sdhci-pci-gli:
- Improve clock handling for GL975x
- sdhci-pci-o2micro:
- Add HW tuning for SDR104 mode
- Fix support for O2 host controller Seabird1"
* tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits)
mmc: mediatek: make function msdc_cqe_disable() static
MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev
dt-bindings: mmc: mediatek: Add document for mt6779
mmc: mediatek: command queue support
mmc: mediatek: refine msdc timeout api
mmc: mediatek: add MT6779 MMC driver support
mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode
mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1
mmc: via-sdmmc: use generic power management
memstick: jmb38x_ms: use generic power management
mmc: sdhci-cadence: do not use hardware tuning for SD mode
mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x
mmc: cqhci: Fix a print format for the task descriptor
mmc: sdhci-of-arasan: fix timings allocation code
mmc: sdhci: Fix a potential uninitialized variable
dt-bindings: mmc: renesas,sdhi: convert to YAML
dt-bindings: mmc: convert arasan sdhci bindings to yaml
mmc: sdhci: Fix potential null pointer access while accessing vqmmc
mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND
dt-bindings: mmc: Add full-pwr-cycle-in-suspend property
...
Diffstat (limited to 'drivers')
37 files changed, 983 insertions, 244 deletions
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c index 383091517ed7..4a6b866b0291 100644 --- a/drivers/memstick/host/jmb38x_ms.c +++ b/drivers/memstick/host/jmb38x_ms.c @@ -793,11 +793,10 @@ static int jmb38x_ms_pmos(struct pci_dev *pdev, int flag) return 0; } -#ifdef CONFIG_PM - -static int jmb38x_ms_suspend(struct pci_dev *dev, pm_message_t state) +static int __maybe_unused jmb38x_ms_suspend(struct device *dev) { - struct jmb38x_ms *jm = pci_get_drvdata(dev); + struct jmb38x_ms *jm = dev_get_drvdata(dev); + int cnt; for (cnt = 0; cnt < jm->host_cnt; ++cnt) { @@ -806,26 +805,17 @@ static int jmb38x_ms_suspend(struct pci_dev *dev, pm_message_t state) memstick_suspend_host(jm->hosts[cnt]); } - pci_save_state(dev); - pci_enable_wake(dev, pci_choose_state(dev, state), 0); - pci_disable_device(dev); - pci_set_power_state(dev, pci_choose_state(dev, state)); + device_wakeup_disable(dev); + return 0; } -static int jmb38x_ms_resume(struct pci_dev *dev) +static int __maybe_unused jmb38x_ms_resume(struct device *dev) { - struct jmb38x_ms *jm = pci_get_drvdata(dev); + struct jmb38x_ms *jm = dev_get_drvdata(dev); int rc; - pci_set_power_state(dev, PCI_D0); - pci_restore_state(dev); - rc = pci_enable_device(dev); - if (rc) - return rc; - pci_set_master(dev); - - jmb38x_ms_pmos(dev, 1); + jmb38x_ms_pmos(to_pci_dev(dev), 1); for (rc = 0; rc < jm->host_cnt; ++rc) { if (!jm->hosts[rc]) @@ -837,13 +827,6 @@ static int jmb38x_ms_resume(struct pci_dev *dev) return 0; } -#else - -#define jmb38x_ms_suspend NULL -#define jmb38x_ms_resume NULL - -#endif /* CONFIG_PM */ - static int jmb38x_ms_count_slots(struct pci_dev *pdev) { int cnt, rc = 0; @@ -1030,13 +1013,14 @@ static struct pci_device_id jmb38x_ms_id_tbl [] = { { } }; +static SIMPLE_DEV_PM_OPS(jmb38x_ms_pm_ops, jmb38x_ms_suspend, jmb38x_ms_resume); + static struct pci_driver jmb38x_ms_driver = { .name = DRIVER_NAME, .id_table = jmb38x_ms_id_tbl, .probe = jmb38x_ms_probe, .remove = jmb38x_ms_remove, - .suspend = jmb38x_ms_suspend, - .resume = jmb38x_ms_resume + .driver.pm = &jmb38x_ms_pm_ops, }; module_pci_driver(jmb38x_ms_driver); diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 8d2b808e9b58..8ccae6452b9c 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1455,12 +1455,12 @@ void mmc_detach_bus(struct mmc_host *host) void _mmc_detect_change(struct mmc_host *host, unsigned long delay, bool cd_irq) { /* - * If the device is configured as wakeup, we prevent a new sleep for - * 5 s to give provision for user space to consume the event. + * Prevent system sleep for 5s to allow user space to consume the + * corresponding uevent. This is especially useful, when CD irq is used + * as a system wakeup, but doesn't hurt in other cases. */ - if (cd_irq && !(host->caps & MMC_CAP_NEEDS_POLL) && - device_can_wakeup(mmc_dev(host))) - pm_wakeup_event(mmc_dev(host), 5000); + if (cd_irq && !(host->caps & MMC_CAP_NEEDS_POLL)) + __pm_wakeup_event(host->ws, 5000); host->detect_change = 1; mmc_schedule_delayed_work(&host->detect, delay); @@ -2303,7 +2303,6 @@ void mmc_start_host(struct mmc_host *host) { host->f_init = max(min(freqs[0], host->f_max), host->f_min); host->rescan_disable = 0; - host->ios.power_mode = MMC_POWER_UNDEFINED; if (!(host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)) { mmc_claim_host(host); diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index c8768726d925..ce43f7573d80 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -15,6 +15,7 @@ #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/pagemap.h> +#include <linux/pm_wakeup.h> #include <linux/export.h> #include <linux/leds.h> #include <linux/slab.h> @@ -36,6 +37,7 @@ static DEFINE_IDA(mmc_host_ida); static void mmc_host_classdev_release(struct device *dev) { struct mmc_host *host = cls_dev_to_mmc_host(dev); + wakeup_source_unregister(host->ws); ida_simple_remove(&mmc_host_ida, host->index); kfree(host); } @@ -275,6 +277,8 @@ int mmc_of_parse(struct mmc_host *host) host->caps |= MMC_CAP_SDIO_IRQ; if (device_property_read_bool(dev, "full-pwr-cycle")) host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE; + if (device_property_read_bool(dev, "full-pwr-cycle-in-suspend")) + host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND; if (device_property_read_bool(dev, "keep-power-in-suspend")) host->pm_caps |= MMC_PM_KEEP_POWER; if (device_property_read_bool(dev, "wakeup-source") || @@ -400,6 +404,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) host->index = err; dev_set_name(&host->class_dev, "mmc%d", host->index); + host->ws = wakeup_source_register(NULL, dev_name(&host->class_dev)); host->parent = dev; host->class_dev.parent = dev; @@ -431,6 +436,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) host->fixed_drv_type = -EINVAL; host->ios.power_delay_ms = 10; + host->ios.power_mode = MMC_POWER_UNDEFINED; return host; } diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 4203303f946a..b3fa193de846 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -2038,7 +2038,8 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend) goto out; if (mmc_can_poweroff_notify(host->card) && - ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend)) + ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend || + (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND))) err = mmc_poweroff_notify(host->card, notify_type); else if (mmc_can_sleep(host->card)) err = mmc_sleep(host); diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index 4b1eb89b401d..6c022ef0f84d 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -203,7 +203,7 @@ static unsigned int mmc_get_max_segments(struct mmc_host *host) /** * mmc_init_request() - initialize the MMC-specific per-request data - * @q: the request queue + * @mq: the request queue * @req: the request * @gfp: memory allocation policy */ diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h index 472fa2fdcf13..d68e6e513a4f 100644 --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h @@ -14,7 +14,7 @@ #include "card.h" -static const struct mmc_fixup mmc_blk_fixups[] = { +static const struct mmc_fixup __maybe_unused mmc_blk_fixups[] = { #define INAND_CMD38_ARG_EXT_CSD 113 #define INAND_CMD38_ARG_ERASE 0x00 #define INAND_CMD38_ARG_TRIM 0x01 @@ -102,7 +102,7 @@ static const struct mmc_fixup mmc_blk_fixups[] = { END_FIXUP }; -static const struct mmc_fixup mmc_ext_csd_fixups[] = { +static const struct mmc_fixup __maybe_unused mmc_ext_csd_fixups[] = { /* * Certain Hynix eMMC 4.41 cards might get broken when HPI feature * is used so disable the HPI feature for such buggy cards. @@ -120,7 +120,7 @@ static const struct mmc_fixup mmc_ext_csd_fixups[] = { }; -static const struct mmc_fixup sdio_fixup_methods[] = { +static const struct mmc_fixup __maybe_unused sdio_fixup_methods[] = { SDIO_FIXUP(SDIO_VENDOR_ID_TI_WL1251, SDIO_DEVICE_ID_TI_WL1251, add_quirk, MMC_QUIRK_NONSTD_FUNC_IF), diff --git a/drivers/mmc/core/regulator.c b/drivers/mmc/core/regulator.c index 96b1d15045d6..609201a467ef 100644 --- a/drivers/mmc/core/regulator.c +++ b/drivers/mmc/core/regulator.c @@ -159,6 +159,8 @@ static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator, /** * mmc_regulator_set_vqmmc - Set VQMMC as per the ios + * @mmc: the host to regulate + * @ios: io bus settings * * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible. * That will match the behavior of old boards where VQMMC and VMMC were supplied diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index b65b26f76d71..7b40553d3934 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -176,15 +176,18 @@ static int sdio_read_cccr(struct mmc_card *card, u32 ocr) if (mmc_host_uhs(card->host)) { if (data & SDIO_UHS_DDR50) card->sw_caps.sd3_bus_mode - |= SD_MODE_UHS_DDR50; + |= SD_MODE_UHS_DDR50 | SD_MODE_UHS_SDR50 + | SD_MODE_UHS_SDR25 | SD_MODE_UHS_SDR12; if (data & SDIO_UHS_SDR50) card->sw_caps.sd3_bus_mode - |= SD_MODE_UHS_SDR50; + |= SD_MODE_UHS_SDR50 | SD_MODE_UHS_SDR25 + | SD_MODE_UHS_SDR12; if (data & SDIO_UHS_SDR104) card->sw_caps.sd3_bus_mode - |= SD_MODE_UHS_SDR104; + |= SD_MODE_UHS_SDR104 | SD_MODE_UHS_SDR50 + | SD_MODE_UHS_SDR25 | SD_MODE_UHS_SDR12; } ret = mmc_io_rw_direct(card, 0, 0, @@ -303,30 +306,49 @@ static int sdio_disable_wide(struct mmc_card *card) return 0; } +static int sdio_disable_4bit_bus(struct mmc_card *card) +{ + int err; + + if (card->type == MMC_TYPE_SDIO) + goto out; + + if (!(card->host->caps & MMC_CAP_4_BIT_DATA)) + return 0; + + if (!(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) + return 0; + + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1); + if (err) + return err; + +out: + return sdio_disable_wide(card); +} + static int sdio_enable_4bit_bus(struct mmc_card *card) { int err; + err = sdio_enable_wide(card); + if (err <= 0) + return err; if (card->type == MMC_TYPE_SDIO) - err = sdio_enable_wide(card); - else if ((card->host->caps & MMC_CAP_4_BIT_DATA) && - (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + goto out; + + if (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4) { err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); - if (err) + if (err) { + sdio_disable_wide(card); return err; - err = sdio_enable_wide(card); - if (err <= 0) - mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1); - } else - return 0; - - if (err > 0) { - mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); - err = 0; + } } +out: + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); - return err; + return 0; } @@ -518,10 +540,8 @@ static int sdio_set_bus_speed_mode(struct mmc_card *card) max_rate = min_not_zero(card->quirk_max_rate, card->sw_caps.uhs_max_dtr); - if (bus_speed) { - mmc_set_timing(card->host, timing); - mmc_set_clock(card->host, max_rate); - } + mmc_set_timing(card->host, timing); + mmc_set_clock(card->host, max_rate); return 0; } @@ -972,7 +992,7 @@ static int mmc_sdio_suspend(struct mmc_host *host) mmc_claim_host(host); if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) - sdio_disable_wide(host->card); + sdio_disable_4bit_bus(host->card); if (!mmc_card_keep_power(host)) { mmc_power_off(host); diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 2ba00acf64e6..79dbf90216b5 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -133,7 +133,7 @@ int sdio_disable_func(struct sdio_func *func) err: pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func)); - return -EIO; + return ret; } EXPORT_SYMBOL_GPL(sdio_disable_func); @@ -709,6 +709,7 @@ EXPORT_SYMBOL_GPL(sdio_get_host_pm_caps); /** * sdio_set_host_pm_flags - set wanted host power management capabilities * @func: SDIO function attached to host + * @flags: Power Management flags to set * * Set a capability bitmask corresponding to wanted host controller * power management features for the upcoming suspend state. diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 3b706af35ec3..9c89a5b780e8 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -1009,6 +1009,7 @@ config MMC_MTK tristate "MediaTek SD/MMC Card Interface support" depends on HAS_DMA select REGULATOR + select MMC_CQHCI help This selects the MediaTek(R) Secure digital and Multimedia card Interface. If you have a machine with a integrated SD/MMC card reader, say Y or M here. diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 5cb692687698..300901415aa2 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -225,12 +225,13 @@ struct atmel_mci_dma { * @lock: Spinlock protecting the queue and associated data. * @regs: Pointer to MMIO registers. * @sg: Scatterlist entry currently being processed by PIO or PDC code. + * @sg_len: Size of the scatterlist * @pio_offset: Offset into the current scatterlist entry. * @buffer: Buffer used if we don't have the r/w proof capability. We * don't have the time to switch pdc buffers so we have to use only * one buffer for the full transaction. * @buf_size: size of the buffer. - * @phys_buf_addr: buffer address needed for pdc. + * @buf_phys_addr: buffer address needed for pdc. * @cur_slot: The slot which is currently using the controller. * @mrq: The request currently being processed on @cur_slot, * or NULL if the controller is idle. @@ -240,6 +241,7 @@ struct atmel_mci_dma { * @data_size: just data->blocks * data->blksz. * @dma: DMA client state. * @data_chan: DMA channel being used for the current data transfer. + * @dma_conf: Configuration for the DMA slave * @cmd_status: Snapshot of SR taken upon completion of the current * command. Only valid when EVENT_CMD_COMPLETE is pending. * @data_status: Snapshot of SR taken upon completion of the current diff --git a/drivers/mmc/host/cqhci.c b/drivers/mmc/host/cqhci.c index 75934f3c117e..cfa87dfa73d8 100644 --- a/drivers/mmc/host/cqhci.c +++ b/drivers/mmc/host/cqhci.c @@ -144,7 +144,7 @@ static void cqhci_dumpregs(struct cqhci_host *cq_host) CQHCI_DUMP(": ===========================================\n"); } -/** +/* * The allocated descriptor table for task, link & transfer descritors * looks like: * |----------| @@ -422,7 +422,7 @@ static void cqhci_prep_task_desc(struct mmc_request *mrq, CQHCI_BLK_COUNT(mrq->data->blocks) | CQHCI_BLK_ADDR((u64)mrq->data->blk_addr); - pr_debug("%s: cqhci: tag %d task descriptor 0x016%llx\n", + pr_debug("%s: cqhci: tag %d task descriptor 0x%016llx\n", mmc_hostname(mrq->host), mrq->tag, (unsigned long long)*data); } diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index 5e3d95b63676..95adeee07217 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -176,6 +176,7 @@ static int dw_mci_exynos_runtime_resume(struct device *dev) #ifdef CONFIG_PM_SLEEP /** * dw_mci_exynos_suspend_noirq - Exynos-specific suspend code + * @dev: Device to suspend (this device) * * This ensures that device will be in runtime active state in * dw_mci_exynos_resume_noirq after calling pm_runtime_force_resume() @@ -188,6 +189,7 @@ static int dw_mci_exynos_suspend_noirq(struct device *dev) /** * dw_mci_exynos_resume_noirq - Exynos-specific resume code + * @dev: Device to resume (this device) * * On exynos5420 there is a silicon errata that will sometimes leave the * WAKEUP_INT bit in the CLKSEL register asserted. This bit is 1 to indicate @@ -472,7 +474,7 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode) struct dw_mci_exynos_priv_data *priv = host->priv; struct mmc_host *mmc = slot->mmc; u8 start_smpl, smpl, candiates = 0; - s8 found = -1; + s8 found; int ret = 0; start_smpl = dw_mci_exynos_get_clksmpl(host); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index a69d6a0c2e15..b5a41a7ce165 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -267,6 +267,7 @@ static struct variant_data variant_stm32_sdmmc = { .datalength_bits = 25, .datactrl_blocksz = 14, .datactrl_any_blocksz = true, + .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .stm32_idmabsize_mask = GENMASK(12, 5), .busy_timeout = true, .busy_detect = true, @@ -292,6 +293,7 @@ static struct variant_data variant_stm32_sdmmcv2 = { .datalength_bits = 25, .datactrl_blocksz = 14, .datactrl_any_blocksz = true, + .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .stm32_idmabsize_mask = GENMASK(16, 5), .dma_lli = true, .busy_timeout = true, diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 39e7fc54c438..4e2583f69a63 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -31,6 +31,8 @@ #include <linux/mmc/sdio.h> #include <linux/mmc/slot-gpio.h> +#include "cqhci.h" + #define MAX_BD_NUM 1024 /*--------------------------------------------------------------------------*/ @@ -152,6 +154,7 @@ #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */ #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */ #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */ +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */ /* MSDC_INTEN mask */ #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */ @@ -182,6 +185,7 @@ /* SDC_CFG mask */ #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */ #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */ +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */ #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */ #define SDC_CFG_SDIO (0x1 << 19) /* RW */ #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */ @@ -230,6 +234,7 @@ #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ #define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */ +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */ #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ @@ -431,9 +436,11 @@ struct msdc_host { /* cmd response sample selection for HS400 */ bool hs400_mode; /* current eMMC will run at hs400 mode */ bool internal_cd; /* Use internal card-detect logic */ + bool cqhci; /* support eMMC hw cmdq */ struct msdc_save_para save_para; /* used when gate HCLK */ struct msdc_tune_para def_tune_para; /* default tune setting */ struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */ + struct cqhci_host *cq_host; }; static const struct mtk_mmc_compatible mt8135_compat = { @@ -538,6 +545,18 @@ static const struct mtk_mmc_compatible mt7620_compat = { .use_internal_cd = true, }; +static const struct mtk_mmc_compatible mt6779_compat = { + .clk_div_bits = 12, + .hs400_tune = false, + .pad_tune_reg = MSDC_PAD_TUNE0, + .async_fifo = true, + .data_tune = true, + .busy_check = true, + .stop_clk_fix = true, + .enhance_rx = true, + .support_64g = true, +}; + static const struct of_device_id msdc_of_ids[] = { { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat}, { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat}, @@ -547,6 +566,7 @@ static const struct of_device_id msdc_of_ids[] = { { .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat}, { .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat}, { .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat}, + { .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat}, {} }; MODULE_DEVICE_TABLE(of, msdc_of_ids); @@ -710,21 +730,21 @@ static void msdc_unprepare_data(struct msdc_host *host, struct mmc_request *mrq) } } -/* clock control primitives */ -static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks) +static u64 msdc_timeout_cal(struct msdc_host *host, u64 ns, u64 clks) { - u32 timeout, clk_ns; + u64 timeout, clk_ns; u32 mode = 0; - host->timeout_ns = ns; - host->timeout_clks = clks; if (host->mmc->actual_clock == 0) { timeout = 0; } else { - clk_ns = 1000000000UL / host->mmc->actual_clock; - timeout = (ns + clk_ns - 1) / clk_ns + clks; + clk_ns = 1000000000ULL; + do_div(clk_ns, host->mmc->actual_clock); + timeout = ns + clk_ns - 1; + do_div(timeout, clk_ns); + timeout += clks; /* in 1048576 sclk cycle unit */ - timeout = (timeout + (0x1 << 20) - 1) >> 20; + timeout = DIV_ROUND_UP(timeout, (0x1 << 20)); if (host->dev_comp->clk_div_bits == 8) sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode); @@ -734,9 +754,30 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks) /*DDR mode will double the clk cycles for data timeout */ timeout = mode >= 2 ? timeout * 2 : timeout; timeout = timeout > 1 ? timeout - 1 : 0; - timeout = timeout > 255 ? 255 : timeout; } - sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, timeout); + return timeout; +} + +/* clock control primitives */ +static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks) +{ + u64 timeout; + + host->timeout_ns = ns; + host->timeout_clks = clks; + + timeout = msdc_timeout_cal(host, ns, clks); + sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, + (u32)(timeout > 255 ? 255 : timeout)); +} + +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks) +{ + u64 timeout; + + timeout = msdc_timeout_cal(host, ns, clks); + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC, + (u32)(timeout > 8191 ? 8191 : timeout)); } static void msdc_gate_clock(struct msdc_host *host) @@ -1018,13 +1059,12 @@ static int msdc_auto_cmd_done(struct msdc_host *host, int events, return cmd->error; } -/** +/* * msdc_recheck_sdio_irq - recheck whether the SDIO irq is lost * * Host controller may lost interrupt in some special case. * Add SDIO irq recheck mechanism to make sure all interrupts * can be processed immediately - * */ static void msdc_recheck_sdio_irq(struct msdc_host *host) { @@ -1456,6 +1496,34 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb) pm_runtime_put_noidle(host->dev); } +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts) +{ + int cmd_err = 0, dat_err = 0; + + if (intsts & MSDC_INT_RSPCRCERR) { + cmd_err = -EILSEQ; + dev_err(host->dev, "%s: CMD CRC ERR", __func__); + } else if (intsts & MSDC_INT_CMDTMO) { + cmd_err = -ETIMEDOUT; + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__); + } + + if (intsts & MSDC_INT_DATCRCERR) { + dat_err = -EILSEQ; + dev_err(host->dev, "%s: DATA CRC ERR", __func__); + } else if (intsts & MSDC_INT_DATTMO) { + dat_err = -ETIMEDOUT; + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__); + } + + if (cmd_err || dat_err) { + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x", + cmd_err, dat_err, intsts); + } + + return cqhci_irq(host->mmc, 0, cmd_err, dat_err); +} + static irqreturn_t msdc_irq(int irq, void *dev_id) { struct msdc_host *host = (struct msdc_host *) dev_id; @@ -1492,6 +1560,14 @@ static irqreturn_t msdc_irq(int irq, void *dev_id) if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ))) break; + if ((host->mmc->caps2 & MMC_CAP2_CQE) && + (events & MSDC_INT_CMDQ)) { + msdc_cmdq_irq(host, events); + /* clear interrupts */ + writel(events, host->base + MSDC_INT); + return IRQ_HANDLED; + } + if (!mrq) { dev_err(host->dev, "%s: MRQ=NULL; events=%08X; event_mask=%08X\n", @@ -2176,6 +2252,36 @@ static int msdc_get_cd(struct mmc_host *mmc) return !val; } +static void msdc_cqe_enable(struct mmc_host *mmc) +{ + struct msdc_host *host = mmc_priv(mmc); + + /* enable cmdq irq */ + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN); + /* enable busy check */ + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); + /* default write data / busy timeout 20s */ + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0); + /* default read data timeout 1s */ + msdc_set_timeout(host, 1000000000ULL, 0); +} + +static void msdc_cqe_disable(struct mmc_host *mmc, bool recovery) +{ + struct msdc_host *host = mmc_priv(mmc); + + /* disable cmdq irq */ + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ); + /* disable busy check */ + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); + + if (recovery) { + sdr_set_field(host->base + MSDC_DMA_CTRL, + MSDC_DMA_CTRL_STOP, 1); + msdc_reset_hw(host); + } +} + static const struct mmc_host_ops mt_msdc_ops = { .post_req = msdc_post_req, .pre_req = msdc_pre_req, @@ -2192,6 +2298,11 @@ static const struct mmc_host_ops mt_msdc_ops = { .hw_reset = msdc_hw_reset, }; +static const struct cqhci_host_ops msdc_cmdq_ops = { + .enable = msdc_cqe_enable, + .disable = msdc_cqe_disable, +}; + static void msdc_of_property_parse(struct platform_device *pdev, struct msdc_host *host) { @@ -2212,6 +2323,12 @@ static void msdc_of_property_parse(struct platform_device *pdev, host->hs400_cmd_resp_sel_rising = true; else host->hs400_cmd_resp_sel_rising = false; + + if (of_property_read_bool(pdev->dev.of_node, + "supports-cqe")) + host->cqhci = true; + else + host->cqhci = false; } static int msdc_drv_probe(struct platform_device *pdev) @@ -2327,6 +2444,8 @@ static int msdc_drv_probe(struct platform_device *pdev) mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; mmc->caps |= MMC_CAP_CMD23; + if (host->cqhci) + mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; /* MMC core transfer sizes tunable parameters */ mmc->max_segs = MAX_BD_NUM; if (host->dev_comp->support_64g) @@ -2342,6 +2461,26 @@ static int msdc_drv_probe(struct platform_device *pdev) host->dma_mask = DMA_BIT_MASK(32); mmc_dev(mmc)->dma_mask = &host->dma_mask; + if (mmc->caps2 & MMC_CAP2_CQE) { + host->cq_host = devm_kzalloc(host->mmc->parent, + sizeof(*host->cq_host), + GFP_KERNEL); + if (!host->cq_host) { + ret = -ENOMEM; + goto host_free; + } + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128; + host->cq_host->mmio = host->base + 0x800; + host->cq_host->ops = &msdc_cmdq_ops; + ret = cqhci_init(host->cq_host, mmc, true); + if (ret) + goto host_free; + mmc->max_segs = 128; + /* cqhci 16bit length */ + /* 0 size, means 65536 so we don't have to -1 here */ + mmc->max_seg_size = 64 * 1024; + } + host->timeout_clks = 3 * 1048576; host->dma.gpd = dma_alloc_coherent(&pdev->dev, 2 * sizeof(struct mt_gpdma_desc), diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index 47ac53e91241..32ab991544ef 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -229,15 +229,15 @@ static void renesas_sdhi_internal_dmac_issue_tasklet_fn(unsigned long arg) DTRAN_CTRL_DM_START); } -static void renesas_sdhi_internal_dmac_complete_tasklet_fn(unsigned long arg) +static bool renesas_sdhi_internal_dmac_complete(struct tmio_mmc_host *host) { - struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; enum dma_data_direction dir; - spin_lock_irq(&host->lock); + if (!host->dma_on) + return false; if (!host->data) - goto out; + return false; if (host->data->flags & MMC_DATA_READ) dir = DMA_FROM_DEVICE; @@ -250,11 +250,30 @@ static void renesas_sdhi_internal_dmac_complete_tasklet_fn(unsigned long arg) if (dir == DMA_FROM_DEVICE) clear_bit(SDHI_INTERNAL_DMAC_RX_IN_USE, &global_flags); + host->dma_on = false; + + return true; +} + +static void renesas_sdhi_internal_dmac_complete_tasklet_fn(unsigned long arg) +{ + struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; + + spin_lock_irq(&host->lock); + if (!renesas_sdhi_internal_dmac_complete(host)) + goto out; + tmio_mmc_do_data_irq(host); out: spin_unlock_irq(&host->lock); } +static void renesas_sdhi_internal_dmac_end_dma(struct tmio_mmc_host *host) +{ + if (host->data) + renesas_sdhi_internal_dmac_complete(host); +} + static void renesas_sdhi_internal_dmac_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata) @@ -292,6 +311,7 @@ static const struct tmio_mmc_dma_ops renesas_sdhi_internal_dmac_dma_ops = { .release = renesas_sdhi_internal_dmac_release_dma, .abort = renesas_sdhi_internal_dmac_abort_dma, .dataend = renesas_sdhi_internal_dmac_dataend_dma, + .end = renesas_sdhi_internal_dmac_end_dma, }; /* diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c index bce910de8b4d..2763a376b054 100644 --- a/drivers/mmc/host/rtsx_pci_sdmmc.c +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c @@ -675,11 +675,11 @@ static u8 sd_search_final_phase(struct realtek_pci_sdmmc *host, u32 phase_map) static void sd_wait_data_idle(struct realtek_pci_sdmmc *host) { - int err, i; + int i; u8 val = 0; for (i = 0; i < 100; i++) { - err = rtsx_pci_read_register(host->pcr, SD_DATA_STATE, &val); + rtsx_pci_read_register(host->pcr, SD_DATA_STATE, &val); if (val & SD_DATA_IDLE) return; diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c index a7084c50ad65..7225d9312af8 100644 --- a/drivers/mmc/host/rtsx_usb_sdmmc.c +++ b/drivers/mmc/host/rtsx_usb_sdmmc.c @@ -654,12 +654,11 @@ static u8 sd_search_final_phase(struct rtsx_usb_sdmmc *host, u32 phase_map) static void sd_wait_data_idle(struct rtsx_usb_sdmmc *host) { - int err, i; + int i; u8 val = 0; for (i = 0; i < 100; i++) { - err = rtsx_usb_ep0_read_register(host->ucr, - SD_DATA_STATE, &val); + rtsx_usb_ep0_read_register(host->ucr, SD_DATA_STATE, &val); if (val & SD_DATA_IDLE) return; diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index d8b76cb8698a..48ecbd0b180d 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -542,6 +542,7 @@ static int amd_select_drive_strength(struct mmc_card *card, unsigned int max_dtr, int host_drv, int card_drv, int *drv_type) { + *drv_type = MMC_SET_DRIVER_TYPE_A; return MMC_SET_DRIVER_TYPE_A; } diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c index 4a6c9ba82538..4d9f7681817c 100644 --- a/drivers/mmc/host/sdhci-cadence.c +++ b/drivers/mmc/host/sdhci-cadence.c @@ -202,57 +202,6 @@ static u32 sdhci_cdns_get_emmc_mode(struct sdhci_cdns_priv *priv) return FIELD_GET(SDHCI_CDNS_HRS06_MODE, tmp); } -static void sdhci_cdns_set_uhs_signaling(struct sdhci_host *host, - unsigned int timing) -{ - struct sdhci_cdns_priv *priv = sdhci_cdns_priv(host); - u32 mode; - - switch (timing) { - case MMC_TIMING_MMC_HS: - mode = SDHCI_CDNS_HRS06_MODE_MMC_SDR; - break; - case MMC_TIMING_MMC_DDR52: - mode = SDHCI_CDNS_HRS06_MODE_MMC_DDR; - break; - case MMC_TIMING_MMC_HS200: - mode = SDHCI_CDNS_HRS06_MODE_MMC_HS200; - break; - case MMC_TIMING_MMC_HS400: - if (priv->enhanced_strobe) - mode = SDHCI_CDNS_HRS06_MODE_MMC_HS400ES; - else - mode = SDHCI_CDNS_HRS06_MODE_MMC_HS400; - break; - default: - mode = SDHCI_CDNS_HRS06_MODE_SD; - break; - } - - sdhci_cdns_set_emmc_mode(priv, mode); - - /* For SD, fall back to the default handler */ - if (mode == SDHCI_CDNS_HRS06_MODE_SD) - sdhci_set_uhs_signaling(host, timing); -} - -static const struct sdhci_ops sdhci_cdns_ops = { - .set_clock = sdhci_set_clock, - .get_timeout_clock = sdhci_cdns_get_timeout_clock, - .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, - .set_uhs_signaling = sdhci_cdns_set_uhs_signaling, -}; - -static const struct sdhci_pltfm_data sdhci_cdns_uniphier_pltfm_data = { - .ops = &sdhci_cdns_ops, - .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, -}; - -static const struct sdhci_pltfm_data sdhci_cdns_pltfm_data = { - .ops = &sdhci_cdns_ops, -}; - static int sdhci_cdns_set_tune_val(struct sdhci_host *host, unsigned int val) { struct sdhci_cdns_priv *priv = sdhci_cdns_priv(host); @@ -286,23 +235,24 @@ static int sdhci_cdns_set_tune_val(struct sdhci_host *host, unsigned int val) return 0; } -static int sdhci_cdns_execute_tuning(struct mmc_host *mmc, u32 opcode) +/* + * In SD mode, software must not use the hardware tuning and instead perform + * an almost identical procedure to eMMC. + */ +static int sdhci_cdns_execute_tuning(struct sdhci_host *host, u32 opcode) { - struct sdhci_host *host = mmc_priv(mmc); int cur_streak = 0; int max_streak = 0; int end_of_streak = 0; int i; /* - * This handler only implements the eMMC tuning that is specific to - * this controller. Fall back to the standard method for SD timing. + * Do not execute tuning for UHS_SDR50 or UHS_DDR50. + * The delay is set by probe, based on the DT properties. */ - if (host->timing != MMC_TIMING_MMC_HS200) - return sdhci_execute_tuning(mmc, opcode); - - if (WARN_ON(opcode != MMC_SEND_TUNING_BLOCK_HS200)) - return -EINVAL; + if (host->timing != MMC_TIMING_MMC_HS200 && + host->timing != MMC_TIMING_UHS_SDR104) + return 0; for (i = 0; i < SDHCI_CDNS_MAX_TUNING_LOOP; i++) { if (sdhci_cdns_set_tune_val(host, i) || @@ -325,6 +275,58 @@ static int sdhci_cdns_execute_tuning(struct mmc_host *mmc, u32 opcode) return sdhci_cdns_set_tune_val(host, end_of_streak - max_streak / 2); } +static void sdhci_cdns_set_uhs_signaling(struct sdhci_host *host, + unsigned int timing) +{ + struct sdhci_cdns_priv *priv = sdhci_cdns_priv(host); + u32 mode; + + switch (timing) { + case MMC_TIMING_MMC_HS: + mode = SDHCI_CDNS_HRS06_MODE_MMC_SDR; + break; + case MMC_TIMING_MMC_DDR52: + mode = SDHCI_CDNS_HRS06_MODE_MMC_DDR; + break; + case MMC_TIMING_MMC_HS200: + mode = SDHCI_CDNS_HRS06_MODE_MMC_HS200; + break; + case MMC_TIMING_MMC_HS400: + if (priv->enhanced_strobe) + mode = SDHCI_CDNS_HRS06_MODE_MMC_HS400ES; + else + mode = SDHCI_CDNS_HRS06_MODE_MMC_HS400; + break; + default: + mode = SDHCI_CDNS_HRS06_MODE_SD; + break; + } + + sdhci_cdns_set_emmc_mode(priv, mode); + + /* For SD, fall back to the default handler */ + if (mode == SDHCI_CDNS_HRS06_MODE_SD) + sdhci_set_uhs_signaling(host, timing); +} + +static const struct sdhci_ops sdhci_cdns_ops = { + .set_clock = sdhci_set_clock, + .get_timeout_clock = sdhci_cdns_get_timeout_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .platform_execute_tuning = sdhci_cdns_execute_tuning, + .set_uhs_signaling = sdhci_cdns_set_uhs_signaling, +}; + +static const struct sdhci_pltfm_data sdhci_cdns_uniphier_pltfm_data = { + .ops = &sdhci_cdns_ops, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, +}; + +static const struct sdhci_pltfm_data sdhci_cdns_pltfm_data = { + .ops = &sdhci_cdns_ops, +}; + static void sdhci_cdns_hs400_enhanced_strobe(struct mmc_host *mmc, struct mmc_ios *ios) { @@ -385,7 +387,6 @@ static int sdhci_cdns_probe(struct platform_device *pdev) priv->hrs_addr = host->ioaddr; priv->enhanced_strobe = false; host->ioaddr += SDHCI_CDNS_SRS_BASE; - host->mmc_host_ops.execute_tuning = sdhci_cdns_execute_tuning; host->mmc_host_ops.hs400_enhanced_strobe = sdhci_cdns_hs400_enhanced_strobe; sdhci_enable_v4_mode(host); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 1d7f84b23a22..a76b4513fbec 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -38,6 +38,16 @@ #define ESDHC_VENDOR_SPEC_SDIO_QUIRK (1 << 1) #define ESDHC_VENDOR_SPEC_VSELECT (1 << 1) #define ESDHC_VENDOR_SPEC_FRC_SDCLK_ON (1 << 8) +#define ESDHC_DEBUG_SEL_AND_STATUS_REG 0xc2 +#define ESDHC_DEBUG_SEL_REG 0xc3 +#define ESDHC_DEBUG_SEL_MASK 0xf +#define ESDHC_DEBUG_SEL_CMD_STATE 1 +#define ESDHC_DEBUG_SEL_DATA_STATE 2 +#define ESDHC_DEBUG_SEL_TRANS_STATE 3 +#define ESDHC_DEBUG_SEL_DMA_STATE 4 +#define ESDHC_DEBUG_SEL_ADMA_STATE 5 +#define ESDHC_DEBUG_SEL_FIFO_STATE 6 +#define ESDHC_DEBUG_SEL_ASYNC_FIFO_STATE 7 #define ESDHC_WTMK_LVL 0x44 #define ESDHC_WTMK_DEFAULT_VAL 0x10401040 #define ESDHC_WTMK_LVL_RD_WML_MASK 0x000000FF @@ -348,6 +358,34 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i writel(((readl(base) & ~(mask << shift)) | (val << shift)), base); } +#define DRIVER_NAME "sdhci-esdhc-imx" +#define ESDHC_IMX_DUMP(f, x...) \ + pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x) +static void esdhc_dump_debug_regs(struct sdhci_host *host) +{ + int i; + char *debug_status[7] = { + "cmd debug status", + "data debug status", + "trans debug status", + "dma debug status", + "adma debug status", + "fifo debug status", + "async fifo debug status" + }; + + ESDHC_IMX_DUMP("========= ESDHC IMX DEBUG STATUS DUMP =========\n"); + for (i = 0; i < 7; i++) { + esdhc_clrset_le(host, ESDHC_DEBUG_SEL_MASK, + ESDHC_DEBUG_SEL_CMD_STATE + i, ESDHC_DEBUG_SEL_REG); + ESDHC_IMX_DUMP("%s: 0x%04x\n", debug_status[i], + readw(host->ioaddr + ESDHC_DEBUG_SEL_AND_STATUS_REG)); + } + + esdhc_clrset_le(host, ESDHC_DEBUG_SEL_MASK, 0, ESDHC_DEBUG_SEL_REG); + +} + static inline void esdhc_wait_for_card_clock_gate_off(struct sdhci_host *host) { u32 present_state; @@ -1237,6 +1275,7 @@ static struct sdhci_ops sdhci_esdhc_ops = { .set_uhs_signaling = esdhc_set_uhs_signaling, .reset = esdhc_reset, .irq = esdhc_cqhci_irq, + .dump_vendor_regs = esdhc_dump_debug_regs, }; static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c index 225603148d7d..e2d8dfe90077 100644 --- a/drivers/mmc/host/sdhci-iproc.c +++ b/drivers/mmc/host/sdhci-iproc.c @@ -294,12 +294,14 @@ static const struct of_device_id sdhci_iproc_of_match[] = { }; MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match); +#ifdef CONFIG_ACPI static const struct acpi_device_id sdhci_iproc_acpi_ids[] = { { .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data }, { .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids); +#endif static int sdhci_iproc_probe(struct platform_device *pdev) { diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index c0d58e9fcc33..5a33389037cd 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -14,6 +14,8 @@ #include <linux/slab.h> #include <linux/iopoll.h> #include <linux/regulator/consumer.h> +#include <linux/interconnect.h> +#include <linux/pinctrl/consumer.h> #include "sdhci-pltfm.h" #include "cqhci.h" @@ -36,7 +38,9 @@ #define CORE_PWRCTL_IO_LOW BIT(2) #define CORE_PWRCTL_IO_HIGH BIT(3) #define CORE_PWRCTL_BUS_SUCCESS BIT(0) +#define CORE_PWRCTL_BUS_FAIL BIT(1) #define CORE_PWRCTL_IO_SUCCESS BIT(2) +#define CORE_PWRCTL_IO_FAIL BIT(3) #define REQ_BUS_OFF BIT(0) #define REQ_BUS_ON BIT(1) #define REQ_IO_LOW BIT(2) @@ -126,6 +130,9 @@ /* Timeout value to avoid infinite waiting for pwr_irq */ #define MSM_PWR_IRQ_TIMEOUT_MS 5000 +/* Max load for eMMC Vdd-io supply */ +#define MMC_VQMMC_MAX_LOAD_UA 325000 + #define msm_host_readl(msm_host, host, offset) \ msm_host->var_ops->msm_readl_relaxed(host, offset) @@ -277,6 +284,7 @@ struct sdhci_msm_host { bool uses_tassadar_dll; u32 dll_config; u32 ddr_config; + bool vqmmc_enabled; }; static const struct sdhci_msm_offset *sdhci_priv_msm_offset(struct sdhci_host *host) @@ -1346,6 +1354,108 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host, sdhci_msm_hs400(host, &mmc->ios); } +static int sdhci_msm_set_pincfg(struct sdhci_msm_host *msm_host, bool level) +{ + struct platform_device *pdev = msm_host->pdev; + int ret; + + if (level) + ret = pinctrl_pm_select_default_state(&pdev->dev); + else + ret = pinctrl_pm_select_sleep_state(&pdev->dev); + + return ret; +} + +static int sdhci_msm_set_vmmc(struct mmc_host *mmc) +{ + if (IS_ERR(mmc->supply.vmmc)) + return 0; + + return mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, mmc->ios.vdd); +} + +static int msm_toggle_vqmmc(struct sdhci_msm_host *msm_host, + struct mmc_host *mmc, bool level) +{ + int ret; + struct mmc_ios ios; + + if (msm_host->vqmmc_enabled == level) + return 0; + + if (level) { + /* Set the IO voltage regulator to default voltage level */ + if (msm_host->caps_0 & CORE_3_0V_SUPPORT) + ios.signal_voltage = MMC_SIGNAL_VOLTAGE_330; + else if (msm_host->caps_0 & CORE_1_8V_SUPPORT) + ios.signal_voltage = MMC_SIGNAL_VOLTAGE_180; + + if (msm_host->caps_0 & CORE_VOLT_SUPPORT) { + ret = mmc_regulator_set_vqmmc(mmc, &ios); + if (ret < 0) { + dev_err(mmc_dev(mmc), "%s: vqmmc set volgate failed: %d\n", + mmc_hostname(mmc), ret); + goto out; + } + } + ret = regulator_enable(mmc->supply.vqmmc); + } else { + ret = regulator_disable(mmc->supply.vqmmc); + } + + if (ret) + dev_err(mmc_dev(mmc), "%s: vqmm %sable failed: %d\n", + mmc_hostname(mmc), level ? "en":"dis", ret); + else + msm_host->vqmmc_enabled = level; +out: + return ret; +} + +static int msm_config_vqmmc_mode(struct sdhci_msm_host *msm_host, + struct mmc_host *mmc, bool hpm) +{ + int load, ret; + + load = hpm ? MMC_VQMMC_MAX_LOAD_UA : 0; + ret = regulator_set_load(mmc->supply.vqmmc, load); + if (ret) + dev_err(mmc_dev(mmc), "%s: vqmmc set load failed: %d\n", + mmc_hostname(mmc), ret); + return ret; +} + +static int sdhci_msm_set_vqmmc(struct sdhci_msm_host *msm_host, + struct mmc_host *mmc, bool level) +{ + int ret; + bool always_on; + + if (IS_ERR(mmc->supply.vqmmc) || + (mmc->ios.power_mode == MMC_POWER_UNDEFINED)) + return 0; + /* + * For eMMC don't turn off Vqmmc, Instead just configure it in LPM + * and HPM modes by setting the corresponding load. + * + * Till eMMC is initialized (i.e. always_on == 0), just turn on/off + * Vqmmc. Vqmmc gets turned off only if init fails and mmc_power_off + * gets invoked. Once eMMC is initialized (i.e. always_on == 1), + * Vqmmc should remain ON, So just set the load instead of turning it + * off/on. + */ + always_on = !mmc_card_is_removable(mmc) && + mmc->card && mmc_card_mmc(mmc->card); + + if (always_on) + ret = msm_config_vqmmc_mode(msm_host, mmc, level); + else + ret = msm_toggle_vqmmc(msm_host, mmc, level); + + return ret; +} + static inline void sdhci_msm_init_pwr_irq_wait(struct sdhci_msm_host *msm_host) { init_waitqueue_head(&msm_host->pwr_irq_wait); @@ -1363,7 +1473,7 @@ static inline void sdhci_msm_complete_pwr_irq_wait( * To what state the register writes will change the IO lines should be passed * as the argument req_type. This API will check whether the IO line's state * is already the expected state and will wait for power irq only if - * power irq is expected to be trigerred based on the current IO line state + * power irq is expected to be triggered based on the current IO line state * and expected IO line state. */ static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type) @@ -1449,8 +1559,9 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + struct mmc_host *mmc = host->mmc; u32 irq_status, irq_ack = 0; - int retry = 10; + int retry = 10, ret; u32 pwr_state = 0, io_level = 0; u32 config; const struct sdhci_msm_offset *msm_offset = msm_host->offset; @@ -1488,21 +1599,45 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) if (irq_status & CORE_PWRCTL_BUS_ON) { pwr_state = REQ_BUS_ON; io_level = REQ_IO_HIGH; - irq_ack |= CORE_PWRCTL_BUS_SUCCESS; } if (irq_status & CORE_PWRCTL_BUS_OFF) { pwr_state = REQ_BUS_OFF; io_level = REQ_IO_LOW; - irq_ack |= CORE_PWRCTL_BUS_SUCCESS; } + + if (pwr_state) { + ret = sdhci_msm_set_vmmc(mmc); + if (!ret) + ret = sdhci_msm_set_vqmmc(msm_host, mmc, + pwr_state & REQ_BUS_ON); + if (!ret) + ret = sdhci_msm_set_pincfg(msm_host, + pwr_state & REQ_BUS_ON); + if (!ret) + irq_ack |= CORE_PWRCTL_BUS_SUCCESS; + else + irq_ack |= CORE_PWRCTL_BUS_FAIL; + } + /* Handle IO LOW/HIGH */ - if (irq_status & CORE_PWRCTL_IO_LOW) { + if (irq_status & CORE_PWRCTL_IO_LOW) io_level = REQ_IO_LOW; - irq_ack |= CORE_PWRCTL_IO_SUCCESS; - } - if (irq_status & CORE_PWRCTL_IO_HIGH) { + + if (irq_status & CORE_PWRCTL_IO_HIGH) io_level = REQ_IO_HIGH; + + if (io_level) irq_ack |= CORE_PWRCTL_IO_SUCCESS; + + if (io_level && !IS_ERR(mmc->supply.vqmmc) && !pwr_state) { + ret = mmc_regulator_set_vqmmc(mmc, &mmc->ios); + if (ret < 0) { + dev_err(mmc_dev(mmc), "%s: IO_level setting failed(%d). signal_voltage: %d, vdd: %d irq_status: 0x%08x\n", + mmc_hostname(mmc), ret, + mmc->ios.signal_voltage, mmc->ios.vdd, + irq_status); + irq_ack |= CORE_PWRCTL_IO_FAIL; + } } /* @@ -1551,7 +1686,7 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) if (io_level) msm_host->curr_io_level = io_level; - pr_debug("%s: %s: Handled IRQ(%d), irq_status=0x%x, ack=0x%x\n", + dev_dbg(mmc_dev(mmc), "%s: %s: Handled IRQ(%d), irq_status=0x%x, ack=0x%x\n", mmc_hostname(msm_host->mmc), __func__, irq, irq_status, irq_ack); } @@ -1584,7 +1719,7 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host) return SDHCI_MSM_MIN_CLOCK; } -/** +/* * __sdhci_msm_set_clock - sdhci_msm clock control. * * Description: @@ -1881,11 +2016,76 @@ static void sdhci_msm_reset(struct sdhci_host *host, u8 mask) sdhci_reset(host, mask); } +static int sdhci_msm_register_vreg(struct sdhci_msm_host *msm_host) +{ + int ret; + + ret = mmc_regulator_get_supply(msm_host->mmc); + if (ret) + return ret; + + sdhci_msm_set_regulator_caps(msm_host); + + return 0; +} + +static int sdhci_msm_start_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + u16 ctrl, status; + + /* + * Signal Voltage Switching is only applicable for Host Controllers + * v3.00 and above. + */ + if (host->version < SDHCI_SPEC_300) + return 0; + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + if (!(host->flags & SDHCI_SIGNALING_330)) + return -EINVAL; + + /* Set 1.8V Signal Enable in the Host Control2 register to 0 */ + ctrl &= ~SDHCI_CTRL_VDD_180; + break; + case MMC_SIGNAL_VOLTAGE_180: + if (!(host->flags & SDHCI_SIGNALING_180)) + return -EINVAL; + + /* Enable 1.8V Signal Enable in the Host Control2 register */ + ctrl |= SDHCI_CTRL_VDD_180; + break; + + default: + return -EINVAL; + } + + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + /* Wait for 5ms */ + usleep_range(5000, 5500); + + /* regulator output should be stable within 5 ms */ + status = ctrl & SDHCI_CTRL_VDD_180; + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if ((ctrl & SDHCI_CTRL_VDD_180) == status) + return 0; + + dev_warn(mmc_dev(mmc), "%s: Regulator output did not became stable\n", + mmc_hostname(mmc)); + + return -EAGAIN; +} + #define DRIVER_NAME "sdhci_msm" #define SDHCI_MSM_DUMP(f, x...) \ pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x) -void sdhci_msm_dump_vendor_regs(struct sdhci_host *host) +static void sdhci_msm_dump_vendor_regs(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); @@ -1967,6 +2167,7 @@ static const struct sdhci_ops sdhci_msm_ops = { .write_b = sdhci_msm_writeb, .irq = sdhci_msm_cqe_irq, .dump_vendor_regs = sdhci_msm_dump_vendor_regs, + .set_power = sdhci_set_power_noreg, }; static const struct sdhci_pltfm_data sdhci_msm_pdata = { @@ -2071,6 +2272,11 @@ static int sdhci_msm_probe(struct platform_device *pdev) } msm_host->bulk_clks[0].clk = clk; + /* Check for optional interconnect paths */ + ret = dev_pm_opp_of_find_icc_paths(&pdev->dev, NULL); + if (ret) + goto bus_clk_disable; + msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "core"); if (IS_ERR(msm_host->opp_table)) { ret = PTR_ERR(msm_host->opp_table); @@ -2176,6 +2382,10 @@ static int sdhci_msm_probe(struct platform_device *pdev) if (core_major == 1 && core_minor >= 0x49) msm_host->updated_ddr_cfg = true; + ret = sdhci_msm_register_vreg(msm_host); + if (ret) + goto clk_disable; + /* * Power on reset state may trigger power irq if previous status of * PWRCTL was either BUS_ON or IO_HIGH_V. So before enabling pwr irq @@ -2220,6 +2430,8 @@ static int sdhci_msm_probe(struct platform_device *pdev) MSM_MMC_AUTOSUSPEND_DELAY_MS); pm_runtime_use_autosuspend(&pdev->dev); + host->mmc_host_ops.start_signal_voltage_switch = + sdhci_msm_start_signal_voltage_switch; host->mmc_host_ops.execute_tuning = sdhci_msm_execute_tuning; if (of_property_read_bool(node, "supports-cqe")) ret = sdhci_msm_cqe_add_host(host, pdev); @@ -2227,7 +2439,6 @@ static int sdhci_msm_probe(struct platform_device *pdev) ret = sdhci_add_host(host); if (ret) goto pm_runtime_disable; - sdhci_msm_set_regulator_caps(msm_host); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index db9b544465cd..f186fbd016b1 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -1025,7 +1025,6 @@ static void arasan_dt_read_clk_phase(struct device *dev, static void arasan_dt_parse_clk_phases(struct device *dev, struct sdhci_arasan_clk_data *clk_data) { - int *iclk_phase, *oclk_phase; u32 mio_bank = 0; int i; @@ -1037,28 +1036,32 @@ static void arasan_dt_parse_clk_phases(struct device *dev, clk_data->set_clk_delays = sdhci_arasan_set_clk_delays; if (of_device_is_compatible(dev->of_node, "xlnx,zynqmp-8.9a")) { - iclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) ZYNQMP_ICLK_PHASE; - oclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) ZYNQMP_OCLK_PHASE; + u32 zynqmp_iclk_phase[MMC_TIMING_MMC_HS400 + 1] = + ZYNQMP_ICLK_PHASE; + u32 zynqmp_oclk_phase[MMC_TIMING_MMC_HS400 + 1] = + ZYNQMP_OCLK_PHASE; of_property_read_u32(dev->of_node, "xlnx,mio-bank", &mio_bank); if (mio_bank == 2) { - oclk_phase[MMC_TIMING_UHS_SDR104] = 90; - oclk_phase[MMC_TIMING_MMC_HS200] = 90; + zynqmp_oclk_phase[MMC_TIMING_UHS_SDR104] = 90; + zynqmp_oclk_phase[MMC_TIMING_MMC_HS200] = 90; } for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) { - clk_data->clk_phase_in[i] = iclk_phase[i]; - clk_data->clk_phase_out[i] = oclk_phase[i]; + clk_data->clk_phase_in[i] = zynqmp_iclk_phase[i]; + clk_data->clk_phase_out[i] = zynqmp_oclk_phase[i]; } } if (of_device_is_compatible(dev->of_node, "xlnx,versal-8.9a")) { - iclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_ICLK_PHASE; - oclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_OCLK_PHASE; + u32 versal_iclk_phase[MMC_TIMING_MMC_HS400 + 1] = + VERSAL_ICLK_PHASE; + u32 versal_oclk_phase[MMC_TIMING_MMC_HS400 + 1] = + VERSAL_OCLK_PHASE; for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) { - clk_data->clk_phase_in[i] = iclk_phase[i]; - clk_data->clk_phase_out[i] = oclk_phase[i]; + clk_data->clk_phase_in[i] = versal_iclk_phase[i]; + clk_data->clk_phase_out[i] = versal_oclk_phase[i]; } } @@ -1299,6 +1302,8 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan, clk_data->sdcardclk_hw.init = &sdcardclk_init; clk_data->sdcardclk = devm_clk_register(dev, &clk_data->sdcardclk_hw); + if (IS_ERR(clk_data->sdcardclk)) + return PTR_ERR(clk_data->sdcardclk); clk_data->sdcardclk_hw.init = NULL; ret = of_clk_add_provider(np, of_clk_src_simple_get, @@ -1349,6 +1354,8 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan, clk_data->sampleclk_hw.init = &sampleclk_init; clk_data->sampleclk = devm_clk_register(dev, &clk_data->sampleclk_hw); + if (IS_ERR(clk_data->sampleclk)) + return PTR_ERR(clk_data->sampleclk); clk_data->sampleclk_hw.init = NULL; ret = of_clk_add_provider(np, of_clk_src_simple_get, @@ -1388,7 +1395,8 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev) * - For Keem Bay, it is required to clear this bit. Its default value is 1'b1. * Keem Bay does not support 64-bit access. * - * @host The sdhci_host + * @host: The sdhci_host + * @value: The value to write */ static void sdhci_arasan_update_support64b(struct sdhci_host *host, u32 value) { diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index ca0166d9bf82..5da2b06d84ae 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -31,10 +31,18 @@ #define SDHCI_GLI_9750_ALL_RST (BIT(24)|BIT(25)|BIT(28)|BIT(30)) #define SDHCI_GLI_9750_PLL 0x864 +#define SDHCI_GLI_9750_PLL_LDIV GENMASK(9, 0) +#define SDHCI_GLI_9750_PLL_PDIV GENMASK(14, 12) +#define SDHCI_GLI_9750_PLL_DIR BIT(15) #define SDHCI_GLI_9750_PLL_TX2_INV BIT(23) #define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20) #define GLI_9750_PLL_TX2_INV_VALUE 0x1 #define GLI_9750_PLL_TX2_DLY_VALUE 0x0 +#define SDHCI_GLI_9750_PLLSSC_STEP GENMASK(28, 24) +#define SDHCI_GLI_9750_PLLSSC_EN BIT(31) + +#define SDHCI_GLI_9750_PLLSSC 0x86C +#define SDHCI_GLI_9750_PLLSSC_PPM GENMASK(31, 16) #define SDHCI_GLI_9750_SW_CTRL 0x874 #define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6) @@ -76,6 +84,21 @@ #define PCIE_GLI_9763E_SCR 0x8E0 #define GLI_9763E_SCR_AXI_REQ BIT(9) +#define PCI_GLI_9755_WT 0x800 +#define PCI_GLI_9755_WT_EN BIT(0) +#define GLI_9755_WT_EN_ON 0x1 +#define GLI_9755_WT_EN_OFF 0x0 + +#define PCI_GLI_9755_PLL 0x64 +#define PCI_GLI_9755_PLL_LDIV GENMASK(9, 0) +#define PCI_GLI_9755_PLL_PDIV GENMASK(14, 12) +#define PCI_GLI_9755_PLL_DIR BIT(15) +#define PCI_GLI_9755_PLLSSC_STEP GENMASK(28, 24) +#define PCI_GLI_9755_PLLSSC_EN BIT(31) + +#define PCI_GLI_9755_PLLSSC 0x68 +#define PCI_GLI_9755_PLLSSC_PPM GENMASK(15, 0) + #define GLI_MAX_TUNING_LOOP 40 /* Genesys Logic chipset */ @@ -280,6 +303,84 @@ static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode) return 0; } +static void gl9750_disable_ssc_pll(struct sdhci_host *host) +{ + u32 pll; + + gl9750_wt_on(host); + pll = sdhci_readl(host, SDHCI_GLI_9750_PLL); + pll &= ~(SDHCI_GLI_9750_PLL_DIR | SDHCI_GLI_9750_PLLSSC_EN); + sdhci_writel(host, pll, SDHCI_GLI_9750_PLL); + gl9750_wt_off(host); +} + +static void gl9750_set_pll(struct sdhci_host *host, u8 dir, u16 ldiv, u8 pdiv) +{ + u32 pll; + + gl9750_wt_on(host); + pll = sdhci_readl(host, SDHCI_GLI_9750_PLL); + pll &= ~(SDHCI_GLI_9750_PLL_LDIV | + SDHCI_GLI_9750_PLL_PDIV | + SDHCI_GLI_9750_PLL_DIR); + pll |= FIELD_PREP(SDHCI_GLI_9750_PLL_LDIV, ldiv) | + FIELD_PREP(SDHCI_GLI_9750_PLL_PDIV, pdiv) | + FIELD_PREP(SDHCI_GLI_9750_PLL_DIR, dir); + sdhci_writel(host, pll, SDHCI_GLI_9750_PLL); + gl9750_wt_off(host); + + /* wait for pll stable */ + mdelay(1); +} + +static void gl9750_set_ssc(struct sdhci_host *host, u8 enable, u8 step, u16 ppm) +{ + u32 pll; + u32 ssc; + + gl9750_wt_on(host); + pll = sdhci_readl(host, SDHCI_GLI_9750_PLL); + ssc = sdhci_readl(host, SDHCI_GLI_9750_PLLSSC); + pll &= ~(SDHCI_GLI_9750_PLLSSC_STEP | + SDHCI_GLI_9750_PLLSSC_EN); + ssc &= ~SDHCI_GLI_9750_PLLSSC_PPM; + pll |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_STEP, step) | + FIELD_PREP(SDHCI_GLI_9750_PLLSSC_EN, enable); + ssc |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_PPM, ppm); + sdhci_writel(host, ssc, SDHCI_GLI_9750_PLLSSC); + sdhci_writel(host, pll, SDHCI_GLI_9750_PLL); + gl9750_wt_off(host); +} + +static void gl9750_set_ssc_pll_205mhz(struct sdhci_host *host) +{ + /* set pll to 205MHz and enable ssc */ + gl9750_set_ssc(host, 0x1, 0x1F, 0xFFE7); + gl9750_set_pll(host, 0x1, 0x246, 0x0); +} + +static void sdhci_gl9750_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct mmc_ios *ios = &host->mmc->ios; + u16 clk; + + host->mmc->actual_clock = 0; + + gl9750_disable_ssc_pll(host); + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); + if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) { + host->mmc->actual_clock = 205000000; + gl9750_set_ssc_pll_205mhz(host); + } + + sdhci_enable_clk(host, clk); +} + static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot) { int ret; @@ -295,6 +396,121 @@ static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot) slot->host->irq = pci_irq_vector(slot->chip->pdev, 0); } +static inline void gl9755_wt_on(struct pci_dev *pdev) +{ + u32 wt_value; + u32 wt_enable; + + pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value); + wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value); + + if (wt_enable == GLI_9755_WT_EN_ON) + return; + + wt_value &= ~PCI_GLI_9755_WT_EN; + wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_ON); + + pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value); +} + +static inline void gl9755_wt_off(struct pci_dev *pdev) +{ + u32 wt_value; + u32 wt_enable; + + pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value); + wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value); + + if (wt_enable == GLI_9755_WT_EN_OFF) + return; + + wt_value &= ~PCI_GLI_9755_WT_EN; + wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_OFF); + + pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value); +} + +static void gl9755_disable_ssc_pll(struct pci_dev *pdev) +{ + u32 pll; + + gl9755_wt_on(pdev); + pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll); + pll &= ~(PCI_GLI_9755_PLL_DIR | PCI_GLI_9755_PLLSSC_EN); + pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll); + gl9755_wt_off(pdev); +} + +static void gl9755_set_pll(struct pci_dev *pdev, u8 dir, u16 ldiv, u8 pdiv) +{ + u32 pll; + + gl9755_wt_on(pdev); + pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll); + pll &= ~(PCI_GLI_9755_PLL_LDIV | + PCI_GLI_9755_PLL_PDIV | + PCI_GLI_9755_PLL_DIR); + pll |= FIELD_PREP(PCI_GLI_9755_PLL_LDIV, ldiv) | + FIELD_PREP(PCI_GLI_9755_PLL_PDIV, pdiv) | + FIELD_PREP(PCI_GLI_9755_PLL_DIR, dir); + pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll); + gl9755_wt_off(pdev); + + /* wait for pll stable */ + mdelay(1); +} + +static void gl9755_set_ssc(struct pci_dev *pdev, u8 enable, u8 step, u16 ppm) +{ + u32 pll; + u32 ssc; + + gl9755_wt_on(pdev); + pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll); + pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &ssc); + pll &= ~(PCI_GLI_9755_PLLSSC_STEP | + PCI_GLI_9755_PLLSSC_EN); + ssc &= ~PCI_GLI_9755_PLLSSC_PPM; + pll |= FIELD_PREP(PCI_GLI_9755_PLLSSC_STEP, step) | + FIELD_PREP(PCI_GLI_9755_PLLSSC_EN, enable); + ssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_PPM, ppm); + pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, ssc); + pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll); + gl9755_wt_off(pdev); +} + +static void gl9755_set_ssc_pll_205mhz(struct pci_dev *pdev) +{ + /* set pll to 205MHz and enable ssc */ + gl9755_set_ssc(pdev, 0x1, 0x1F, 0xFFE7); + gl9755_set_pll(pdev, 0x1, 0x246, 0x0); +} + +static void sdhci_gl9755_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct mmc_ios *ios = &host->mmc->ios; + struct pci_dev *pdev; + u16 clk; + + pdev = slot->chip->pdev; + host->mmc->actual_clock = 0; + + gl9755_disable_ssc_pll(pdev); + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); + if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) { + host->mmc->actual_clock = 205000000; + gl9755_set_ssc_pll_205mhz(pdev); + } + + sdhci_enable_clk(host, clk); +} + static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) { struct sdhci_host *host = slot->host; @@ -440,7 +656,7 @@ static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot) } static const struct sdhci_ops sdhci_gl9755_ops = { - .set_clock = sdhci_set_clock, + .set_clock = sdhci_gl9755_set_clock, .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, @@ -460,7 +676,7 @@ const struct sdhci_pci_fixes sdhci_gl9755 = { static const struct sdhci_ops sdhci_gl9750_ops = { .read_l = sdhci_gl9750_readl, - .set_clock = sdhci_set_clock, + .set_clock = sdhci_gl9750_set_clock, .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_gl9750_reset, diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c index e2a846885902..fa76748d8929 100644 --- a/drivers/mmc/host/sdhci-pci-o2micro.c +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -196,7 +196,7 @@ static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode) { int i; - sdhci_send_tuning(host, MMC_SEND_TUNING_BLOCK_HS200); + sdhci_send_tuning(host, opcode); for (i = 0; i < 150; i++) { u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); @@ -305,10 +305,12 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode) * This handler only implements the eMMC tuning that is specific to * this controller. Fall back to the standard method for other TIMING. */ - if (host->timing != MMC_TIMING_MMC_HS200) + if ((host->timing != MMC_TIMING_MMC_HS200) && + (host->timing != MMC_TIMING_UHS_SDR104)) return sdhci_execute_tuning(mmc, opcode); - if (WARN_ON(opcode != MMC_SEND_TUNING_BLOCK_HS200)) + if (WARN_ON((opcode != MMC_SEND_TUNING_BLOCK_HS200) && + (opcode != MMC_SEND_TUNING_BLOCK))) return -EINVAL; /* * Judge the tuning reason, whether caused by dll shift @@ -342,6 +344,9 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode) sdhci_set_bus_width(host, current_bus_width); } + sdhci_reset(host, SDHCI_RESET_CMD); + sdhci_reset(host, SDHCI_RESET_DATA); + host->flags &= ~SDHCI_HS400_TUNING; return 0; } @@ -369,7 +374,6 @@ static void o2_pci_led_enable(struct sdhci_pci_chip *chip) scratch_32 |= O2_SD_LED_ENABLE; pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32); - } static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip) @@ -497,6 +501,10 @@ static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk) static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock) { u16 clk; + u8 scratch; + u32 scratch_32; + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct sdhci_pci_chip *chip = slot->chip; host->mmc->actual_clock = 0; @@ -505,6 +513,23 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock) if (clock == 0) return; + if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) { + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32); + + if ((scratch_32 & 0xFFFF0000) != 0x2c280000) + o2_pci_set_baseclk(chip, 0x2c280000); + + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + } + clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); sdhci_o2_enable_clk(host, clk); } @@ -561,6 +586,12 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd; } + if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD1) { + slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd; + host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + } + host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning; if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2) diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 64200c78e90d..9194bb73e601 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -107,8 +107,11 @@ * @ioarea: The resource created when we claimed the IO area. * @pdata: The platform data for this controller. * @cur_clk: The index of the current bus clock. + * @ext_cd_irq: External card detect interrupt. * @clk_io: The clock for the internal bus interface. + * @clk_rates: Clock frequencies. * @clk_bus: The clocks that are available for the SD/MMC bus clock. + * @no_divider: No or non-standard internal clock divider. */ struct sdhci_s3c { struct sdhci_host *host; @@ -128,6 +131,7 @@ struct sdhci_s3c { /** * struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data * @sdhci_quirks: sdhci host specific quirks. + * @no_divider: no or non-standard internal clock divider. * * Specifies platform specific configuration of sdhci controller. * Note: A structure for driver specific platform data is used for future diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 3a372ab3d12e..0a3f9d024f2a 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -96,7 +96,16 @@ #define NVQUIRK_ENABLE_SDR50 BIT(3) #define NVQUIRK_ENABLE_SDR104 BIT(4) #define NVQUIRK_ENABLE_DDR50 BIT(5) +/* + * HAS_PADCALIB NVQUIRK is for SoC's supporting auto calibration of pads + * drive strength. + */ #define NVQUIRK_HAS_PADCALIB BIT(6) +/* + * NEEDS_PAD_CONTROL NVQUIRK is for SoC's having separate 3V3 and 1V8 pads. + * 3V3/1V8 pad selection happens through pinctrl state selection depending + * on the signaling mode. + */ #define NVQUIRK_NEEDS_PAD_CONTROL BIT(7) #define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP BIT(8) #define NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING BIT(9) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 1ee866a38794..3ad394b40eb1 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -4104,7 +4104,8 @@ int sdhci_setup_host(struct sdhci_host *host) unsigned int ocr_avail; unsigned int override_timeout_clk; u32 max_clk; - int ret; + int ret = 0; + bool enable_vqmmc = false; WARN_ON(host == NULL); if (host == NULL) @@ -4118,9 +4119,12 @@ int sdhci_setup_host(struct sdhci_host *host) * the host can take the appropriate action if regulators are not * available. */ - ret = mmc_regulator_get_supply(mmc); - if (ret) - return ret; + if (!mmc->supply.vqmmc) { + ret = mmc_regulator_get_supply(mmc); + if (ret) + return ret; + enable_vqmmc = true; + } DBG("Version: 0x%08x | Present: 0x%08x\n", sdhci_readw(host, SDHCI_HOST_VERSION), @@ -4377,7 +4381,10 @@ int sdhci_setup_host(struct sdhci_host *host) mmc->caps |= MMC_CAP_NEEDS_POLL; if (!IS_ERR(mmc->supply.vqmmc)) { - ret = regulator_enable(mmc->supply.vqmmc); + if (enable_vqmmc) { + ret = regulator_enable(mmc->supply.vqmmc); + host->sdhci_core_to_disable_vqmmc = !ret; + } /* If vqmmc provides no 1.8V signalling, then there's no UHS */ if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000, @@ -4396,6 +4403,7 @@ int sdhci_setup_host(struct sdhci_host *host) mmc_hostname(mmc), ret); mmc->supply.vqmmc = ERR_PTR(-EINVAL); } + } if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) { @@ -4626,7 +4634,7 @@ int sdhci_setup_host(struct sdhci_host *host) return 0; unreg: - if (!IS_ERR(mmc->supply.vqmmc)) + if (host->sdhci_core_to_disable_vqmmc) regulator_disable(mmc->supply.vqmmc); undma: if (host->align_buffer) @@ -4644,7 +4652,7 @@ void sdhci_cleanup_host(struct sdhci_host *host) { struct mmc_host *mmc = host->mmc; - if (!IS_ERR(mmc->supply.vqmmc)) + if (host->sdhci_core_to_disable_vqmmc) regulator_disable(mmc->supply.vqmmc); if (host->align_buffer) @@ -4787,7 +4795,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) destroy_workqueue(host->complete_wq); - if (!IS_ERR(mmc->supply.vqmmc)) + if (host->sdhci_core_to_disable_vqmmc) regulator_disable(mmc->supply.vqmmc); if (host->align_buffer) diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 0008bbd27127..0770c036e2ff 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -567,6 +567,7 @@ struct sdhci_host { u32 caps1; /* CAPABILITY_1 */ bool read_caps; /* Capability flags have been read */ + bool sdhci_core_to_disable_vqmmc; /* sdhci core can disable vqmmc */ unsigned int ocr_avail_sdio; /* OCR bit masks */ unsigned int ocr_avail_sd; unsigned int ocr_avail_mmc; diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index 061b4398a4f1..f9d24af12396 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -11,6 +11,7 @@ #include <linux/pm_runtime.h> #include <linux/property.h> #include <linux/regmap.h> +#include <linux/sys_soc.h> #include "cqhci.h" #include "sdhci-pltfm.h" @@ -46,6 +47,8 @@ #define SEL100_MASK BIT(SEL100_SHIFT) #define FREQSEL_SHIFT 8 #define FREQSEL_MASK GENMASK(10, 8) +#define CLKBUFSEL_SHIFT 0 +#define CLKBUFSEL_MASK GENMASK(2, 0) #define DLL_TRIM_ICP_SHIFT 4 #define DLL_TRIM_ICP_MASK GENMASK(7, 4) #define DR_TY_SHIFT 20 @@ -60,6 +63,8 @@ #define CALDONE_MASK BIT(CALDONE_SHIFT) #define RETRIM_SHIFT 17 #define RETRIM_MASK BIT(RETRIM_SHIFT) +#define SELDLYTXCLK_SHIFT 17 +#define SELDLYTXCLK_MASK BIT(SELDLYTXCLK_SHIFT) #define DRIVER_STRENGTH_50_OHM 0x0 #define DRIVER_STRENGTH_33_OHM 0x1 @@ -83,6 +88,7 @@ struct sdhci_am654_data { struct regmap *base; bool legacy_otapdly; int otap_del_sel[11]; + int clkbuf_sel; int trm_icp; int drv_strength; bool dll_on; @@ -97,6 +103,7 @@ struct sdhci_am654_driver_data { #define FREQSEL_2_BIT (1 << 1) #define STRBSEL_4_BIT (1 << 2) #define DLL_PRESENT (1 << 3) +#define DLL_CALIB (1 << 4) }; struct timing_data { @@ -202,34 +209,41 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_set_clock(host, clock); - if (clock > CLOCK_TOO_SLOW_HZ) { - /* Setup DLL Output TAP delay */ - if (sdhci_am654->legacy_otapdly) - otap_del_sel = sdhci_am654->otap_del_sel[0]; - else - otap_del_sel = sdhci_am654->otap_del_sel[timing]; + /* Setup DLL Output TAP delay */ + if (sdhci_am654->legacy_otapdly) + otap_del_sel = sdhci_am654->otap_del_sel[0]; + else + otap_del_sel = sdhci_am654->otap_del_sel[timing]; - otap_del_ena = (timing > MMC_TIMING_UHS_SDR25) ? 1 : 0; + otap_del_ena = (timing > MMC_TIMING_UHS_SDR25) ? 1 : 0; - mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; - val = (otap_del_ena << OTAPDLYENA_SHIFT) | - (otap_del_sel << OTAPDLYSEL_SHIFT); + mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; + val = (otap_del_ena << OTAPDLYENA_SHIFT) | + (otap_del_sel << OTAPDLYSEL_SHIFT); - /* Write to STRBSEL for HS400 speed mode */ - if (timing == MMC_TIMING_MMC_HS400) { - if (sdhci_am654->flags & STRBSEL_4_BIT) - mask |= STRBSEL_4BIT_MASK; - else - mask |= STRBSEL_8BIT_MASK; + /* Write to STRBSEL for HS400 speed mode */ + if (timing == MMC_TIMING_MMC_HS400) { + if (sdhci_am654->flags & STRBSEL_4_BIT) + mask |= STRBSEL_4BIT_MASK; + else + mask |= STRBSEL_8BIT_MASK; - val |= sdhci_am654->strb_sel << STRBSEL_SHIFT; - } + val |= sdhci_am654->strb_sel << STRBSEL_SHIFT; + } - regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val); + regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val); - if (timing > MMC_TIMING_UHS_SDR25) - sdhci_am654_setup_dll(host, clock); + if (timing > MMC_TIMING_UHS_SDR25 && clock > CLOCK_TOO_SLOW_HZ) { + regmap_update_bits(sdhci_am654->base, PHY_CTRL5, + SELDLYTXCLK_MASK, 0); + sdhci_am654_setup_dll(host, clock); + } else { + regmap_update_bits(sdhci_am654->base, PHY_CTRL5, + SELDLYTXCLK_MASK, 1 << SELDLYTXCLK_SHIFT); } + + regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK, + sdhci_am654->clkbuf_sel); } static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host, @@ -252,6 +266,9 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host, (otap_del_sel << OTAPDLYSEL_SHIFT); regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val); + regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK, + sdhci_am654->clkbuf_sel); + sdhci_set_clock(host, clock); } @@ -323,6 +340,12 @@ static const struct sdhci_pltfm_data sdhci_am654_pdata = { .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, }; +static const struct sdhci_am654_driver_data sdhci_am654_sr1_drvdata = { + .pdata = &sdhci_am654_pdata, + .flags = IOMUX_PRESENT | FREQSEL_2_BIT | STRBSEL_4_BIT | DLL_PRESENT | + DLL_CALIB, +}; + static const struct sdhci_am654_driver_data sdhci_am654_drvdata = { .pdata = &sdhci_am654_pdata, .flags = IOMUX_PRESENT | FREQSEL_2_BIT | STRBSEL_4_BIT | DLL_PRESENT, @@ -348,7 +371,7 @@ static const struct sdhci_pltfm_data sdhci_j721e_8bit_pdata = { static const struct sdhci_am654_driver_data sdhci_j721e_8bit_drvdata = { .pdata = &sdhci_j721e_8bit_pdata, - .flags = DLL_PRESENT, + .flags = DLL_PRESENT | DLL_CALIB, }; static struct sdhci_ops sdhci_j721e_4bit_ops = { @@ -374,6 +397,14 @@ static const struct sdhci_am654_driver_data sdhci_j721e_4bit_drvdata = { .flags = IOMUX_PRESENT, }; +static const struct soc_device_attribute sdhci_am654_devices[] = { + { .family = "AM65X", + .revision = "SR1.0", + .data = &sdhci_am654_sr1_drvdata + }, + {/* sentinel */} +}; + static void sdhci_am654_dumpregs(struct mmc_host *mmc) { sdhci_dumpregs(mmc_priv(mmc)); @@ -469,7 +500,7 @@ static int sdhci_am654_init(struct sdhci_host *host) mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, 0x0); - if (sdhci_am654->flags & DLL_PRESENT) { + if (sdhci_am654->flags & DLL_CALIB) { regmap_read(sdhci_am654->base, PHY_STAT1, &val); if (~val & CALDONE_MASK) { /* Calibrate IO lines */ @@ -560,6 +591,8 @@ static int sdhci_am654_get_of_property(struct platform_device *pdev, } device_property_read_u32(dev, "ti,strobe-sel", &sdhci_am654->strb_sel); + device_property_read_u32(dev, "ti,clkbuf-sel", + &sdhci_am654->clkbuf_sel); sdhci_get_of_property(pdev); @@ -585,6 +618,7 @@ static const struct of_device_id sdhci_am654_of_match[] = { static int sdhci_am654_probe(struct platform_device *pdev) { const struct sdhci_am654_driver_data *drvdata; + const struct soc_device_attribute *soc; struct sdhci_pltfm_host *pltfm_host; struct sdhci_am654_data *sdhci_am654; const struct of_device_id *match; @@ -596,6 +630,12 @@ static int sdhci_am654_probe(struct platform_device *pdev) match = of_match_node(sdhci_am654_of_match, pdev->dev.of_node); drvdata = match->data; + + /* Update drvdata based on SoC revision */ + soc = soc_device_match(sdhci_am654_devices); + if (soc && soc->data) + drvdata = soc->data; + host = sdhci_pltfm_init(pdev, drvdata->pdata, sizeof(*sdhci_am654)); if (IS_ERR(host)) return PTR_ERR(host); diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 7e1fd557109c..9f53634aa411 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -191,9 +191,9 @@ STS2_AC12BSYTO | STS2_RSPBSYTO | \ STS2_AC12RSPTO | STS2_RSPTO) -#define CLKDEV_EMMC_DATA 52000000 /* 52MHz */ -#define CLKDEV_MMC_DATA 20000000 /* 20MHz */ -#define CLKDEV_INIT 400000 /* 400 KHz */ +#define CLKDEV_EMMC_DATA 52000000 /* 52 MHz */ +#define CLKDEV_MMC_DATA 20000000 /* 20 MHz */ +#define CLKDEV_INIT 400000 /* 400 kHz */ enum sh_mmcif_state { STATE_IDLE, diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index b4cf10109162..0a4f36500add 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -118,6 +118,9 @@ struct tmio_mmc_dma_ops { void (*release)(struct tmio_mmc_host *host); void (*abort)(struct tmio_mmc_host *host); void (*dataend)(struct tmio_mmc_host *host); + + /* optional */ + void (*end)(struct tmio_mmc_host *host); /* held host->lock */ }; struct tmio_mmc_host { diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index d7fde57c78c1..946fb013c610 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -57,6 +57,12 @@ static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host, host->dma_ops->start(host, data); } +static inline void tmio_mmc_end_dma(struct tmio_mmc_host *host) +{ + if (host->dma_ops && host->dma_ops->end) + host->dma_ops->end(host); +} + static inline void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) { if (host->dma_ops) @@ -797,6 +803,8 @@ static void tmio_mmc_finish_request(struct tmio_mmc_host *host) spin_lock_irqsave(&host->lock, flags); + tmio_mmc_end_dma(host); + mrq = host->mrq; if (IS_ERR_OR_NULL(mrq)) { spin_unlock_irqrestore(&host->lock, flags); diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c index ef95bce50889..49dab9f42b6d 100644 --- a/drivers/mmc/host/via-sdmmc.c +++ b/drivers/mmc/host/via-sdmmc.c @@ -1220,9 +1220,7 @@ static void via_sd_remove(struct pci_dev *pcidev) pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device); } -#ifdef CONFIG_PM - -static void via_init_sdc_pm(struct via_crdr_mmc_host *host) +static void __maybe_unused via_init_sdc_pm(struct via_crdr_mmc_host *host) { struct sdhcreg *pm_sdhcreg; void __iomem *addrbase; @@ -1256,30 +1254,27 @@ static void via_init_sdc_pm(struct via_crdr_mmc_host *host) via_print_sdchc(host); } -static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state) +static int __maybe_unused via_sd_suspend(struct device *dev) { struct via_crdr_mmc_host *host; - host = pci_get_drvdata(pcidev); + host = dev_get_drvdata(dev); via_save_pcictrlreg(host); via_save_sdcreg(host); - pci_save_state(pcidev); - pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0); - pci_disable_device(pcidev); - pci_set_power_state(pcidev, pci_choose_state(pcidev, state)); + device_wakeup_enable(dev); return 0; } -static int via_sd_resume(struct pci_dev *pcidev) +static int __maybe_unused via_sd_resume(struct device *dev) { struct via_crdr_mmc_host *sdhost; int ret = 0; u8 gatt; - sdhost = pci_get_drvdata(pcidev); + sdhost = dev_get_drvdata(dev); gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON; if (sdhost->power == MMC_VDD_165_195) @@ -1294,32 +1289,20 @@ static int via_sd_resume(struct pci_dev *pcidev) msleep(100); - pci_set_power_state(pcidev, PCI_D0); - pci_restore_state(pcidev); - ret = pci_enable_device(pcidev); - if (ret) - return ret; - via_restore_pcictrlreg(sdhost); via_init_sdc_pm(sdhost); return ret; } -#else /* CONFIG_PM */ - -#define via_sd_suspend NULL -#define via_sd_resume NULL - -#endif /* CONFIG_PM */ +static SIMPLE_DEV_PM_OPS(via_sd_pm_ops, via_sd_suspend, via_sd_resume); static struct pci_driver via_sd_driver = { .name = DRV_NAME, .id_table = via_ids, .probe = via_sd_probe, .remove = via_sd_remove, - .suspend = via_sd_suspend, - .resume = via_sd_resume, + .driver.pm = &via_sd_pm_ops, }; module_pci_driver(via_sd_driver); diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c index 5d6143a55187..a04ff75c409f 100644 --- a/drivers/net/wireless/rsi/rsi_91x_sdio.c +++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c @@ -1038,10 +1038,10 @@ static int rsi_probe(struct sdio_func *pfunction, goto fail_free_adapter; } - if (pfunction->device == RSI_SDIO_PID_9113) { + if (pfunction->device == SDIO_DEVICE_ID_RSI_9113) { rsi_dbg(ERR_ZONE, "%s: 9113 module detected\n", __func__); adapter->device_model = RSI_DEV_9113; - } else if (pfunction->device == RSI_SDIO_PID_9116) { + } else if (pfunction->device == SDIO_DEVICE_ID_RSI_9116) { rsi_dbg(ERR_ZONE, "%s: 9116 module detected\n", __func__); adapter->device_model = RSI_DEV_9116; } else { @@ -1526,8 +1526,8 @@ static const struct dev_pm_ops rsi_pm_ops = { #endif static const struct sdio_device_id rsi_dev_table[] = { - { SDIO_DEVICE(RSI_SDIO_VENDOR_ID, RSI_SDIO_PID_9113) }, - { SDIO_DEVICE(RSI_SDIO_VENDOR_ID, RSI_SDIO_PID_9116) }, + { SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9113) }, + { SDIO_DEVICE(SDIO_VENDOR_ID_RSI, SDIO_DEVICE_ID_RSI_9116) }, { /* Blank */}, }; diff --git a/drivers/net/wireless/rsi/rsi_sdio.h b/drivers/net/wireless/rsi/rsi_sdio.h index c5cfb6238f73..9afc1d0d2684 100644 --- a/drivers/net/wireless/rsi/rsi_sdio.h +++ b/drivers/net/wireless/rsi/rsi_sdio.h @@ -28,10 +28,6 @@ #include <linux/mmc/sdio_ids.h> #include "rsi_main.h" -#define RSI_SDIO_VENDOR_ID 0x041B -#define RSI_SDIO_PID_9113 0x9330 -#define RSI_SDIO_PID_9116 0x9116 - enum sdio_interrupt_type { BUFFER_FULL = 0x0, BUFFER_AVAILABLE = 0x2, |