Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...

28 files changed, 2531 insertions, 1474 deletions

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index f1a274994bb1..4a6c46dea8a0 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -252,6 +252,15 @@ config EP93XX_DMA
 	help
 	  Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
 
+config DMA_SA11X0
+	tristate "SA-11x0 DMA support"
+	depends on ARCH_SA1100
+	select DMA_ENGINE
+	help
+	  Support the DMA engine found on Intel StrongARM SA-1100 and
+	  SA-1110 SoCs.  This DMA engine can only be used with on-chip
+	  devices.
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 009a222e8283..86b795baba98 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_PL330_DMA) += pl330.o
 obj-$(CONFIG_PCH_DMA) += pch_dma.o
 obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
 obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
+obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c
new file mode 100644
index 000000000000..16a6b48883cf
--- /dev/null
+++ b/drivers/dma/sa11x0-dma.c
@@ -0,0 +1,1109 @@
+/*
+ * SA11x0 DMAengine support
+ *
+ * Copyright (C) 2012 Russell King
+ *   Derived in part from arch/arm/mach-sa1100/dma.c,
+ *   Copyright (C) 2000, 2001 by Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sa11x0-dma.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define NR_PHY_CHAN	6
+#define DMA_ALIGN	3
+#define DMA_MAX_SIZE	0x1fff
+#define DMA_CHUNK_SIZE	0x1000
+
+#define DMA_DDAR	0x00
+#define DMA_DCSR_S	0x04
+#define DMA_DCSR_C	0x08
+#define DMA_DCSR_R	0x0c
+#define DMA_DBSA	0x10
+#define DMA_DBTA	0x14
+#define DMA_DBSB	0x18
+#define DMA_DBTB	0x1c
+#define DMA_SIZE	0x20
+
+#define DCSR_RUN	(1 << 0)
+#define DCSR_IE		(1 << 1)
+#define DCSR_ERROR	(1 << 2)
+#define DCSR_DONEA	(1 << 3)
+#define DCSR_STRTA	(1 << 4)
+#define DCSR_DONEB	(1 << 5)
+#define DCSR_STRTB	(1 << 6)
+#define DCSR_BIU	(1 << 7)
+
+#define DDAR_RW		(1 << 0)	/* 0 = W, 1 = R */
+#define DDAR_E		(1 << 1)	/* 0 = LE, 1 = BE */
+#define DDAR_BS		(1 << 2)	/* 0 = BS4, 1 = BS8 */
+#define DDAR_DW		(1 << 3)	/* 0 = 8b, 1 = 16b */
+#define DDAR_Ser0UDCTr	(0x0 << 4)
+#define DDAR_Ser0UDCRc	(0x1 << 4)
+#define DDAR_Ser1SDLCTr	(0x2 << 4)
+#define DDAR_Ser1SDLCRc	(0x3 << 4)
+#define DDAR_Ser1UARTTr	(0x4 << 4)
+#define DDAR_Ser1UARTRc	(0x5 << 4)
+#define DDAR_Ser2ICPTr	(0x6 << 4)
+#define DDAR_Ser2ICPRc	(0x7 << 4)
+#define DDAR_Ser3UARTTr	(0x8 << 4)
+#define DDAR_Ser3UARTRc	(0x9 << 4)
+#define DDAR_Ser4MCP0Tr	(0xa << 4)
+#define DDAR_Ser4MCP0Rc	(0xb << 4)
+#define DDAR_Ser4MCP1Tr	(0xc << 4)
+#define DDAR_Ser4MCP1Rc	(0xd << 4)
+#define DDAR_Ser4SSPTr	(0xe << 4)
+#define DDAR_Ser4SSPRc	(0xf << 4)
+
+struct sa11x0_dma_sg {
+	u32			addr;
+	u32			len;
+};
+
+struct sa11x0_dma_desc {
+	struct dma_async_tx_descriptor tx;
+	u32			ddar;
+	size_t			size;
+
+	/* maybe protected by c->lock */
+	struct list_head	node;
+	unsigned		sglen;
+	struct sa11x0_dma_sg	sg[0];
+};
+
+struct sa11x0_dma_phy;
+
+struct sa11x0_dma_chan {
+	struct dma_chan		chan;
+	spinlock_t		lock;
+	dma_cookie_t		lc;
+
+	/* protected by c->lock */
+	struct sa11x0_dma_phy	*phy;
+	enum dma_status		status;
+	struct list_head	desc_submitted;
+	struct list_head	desc_issued;
+
+	/* protected by d->lock */
+	struct list_head	node;
+
+	u32			ddar;
+	const char		*name;
+};
+
+struct sa11x0_dma_phy {
+	void __iomem		*base;
+	struct sa11x0_dma_dev	*dev;
+	unsigned		num;
+
+	struct sa11x0_dma_chan	*vchan;
+
+	/* Protected by c->lock */
+	unsigned		sg_load;
+	struct sa11x0_dma_desc	*txd_load;
+	unsigned		sg_done;
+	struct sa11x0_dma_desc	*txd_done;
+#ifdef CONFIG_PM_SLEEP
+	u32			dbs[2];
+	u32			dbt[2];
+	u32			dcsr;
+#endif
+};
+
+struct sa11x0_dma_dev {
+	struct dma_device	slave;
+	void __iomem		*base;
+	spinlock_t		lock;
+	struct tasklet_struct	task;
+	struct list_head	chan_pending;
+	struct list_head	desc_complete;
+	struct sa11x0_dma_phy	phy[NR_PHY_CHAN];
+};
+
+static struct sa11x0_dma_chan *to_sa11x0_dma_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct sa11x0_dma_chan, chan);
+}
+
+static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev)
+{
+	return container_of(dmadev, struct sa11x0_dma_dev, slave);
+}
+
+static struct sa11x0_dma_desc *to_sa11x0_dma_tx(struct dma_async_tx_descriptor *tx)
+{
+	return container_of(tx, struct sa11x0_dma_desc, tx);
+}
+
+static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c)
+{
+	if (list_empty(&c->desc_issued))
+		return NULL;
+
+	return list_first_entry(&c->desc_issued, struct sa11x0_dma_desc, node);
+}
+
+static void sa11x0_dma_start_desc(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd)
+{
+	list_del(&txd->node);
+	p->txd_load = txd;
+	p->sg_load = 0;
+
+	dev_vdbg(p->dev->slave.dev, "pchan %u: txd %p[%x]: starting: DDAR:%x\n",
+		p->num, txd, txd->tx.cookie, txd->ddar);
+}
+
+static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p,
+	struct sa11x0_dma_chan *c)
+{
+	struct sa11x0_dma_desc *txd = p->txd_load;
+	struct sa11x0_dma_sg *sg;
+	void __iomem *base = p->base;
+	unsigned dbsx, dbtx;
+	u32 dcsr;
+
+	if (!txd)
+		return;
+
+	dcsr = readl_relaxed(base + DMA_DCSR_R);
+
+	/* Don't try to load the next transfer if both buffers are started */
+	if ((dcsr & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB))
+		return;
+
+	if (p->sg_load == txd->sglen) {
+		struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c);
+
+		/*
+		 * We have reached the end of the current descriptor.
+		 * Peek at the next descriptor, and if compatible with
+		 * the current, start processing it.
+		 */
+		if (txn && txn->ddar == txd->ddar) {
+			txd = txn;
+			sa11x0_dma_start_desc(p, txn);
+		} else {
+			p->txd_load = NULL;
+			return;
+		}
+	}
+
+	sg = &txd->sg[p->sg_load++];
+
+	/* Select buffer to load according to channel status */
+	if (((dcsr & (DCSR_BIU | DCSR_STRTB)) == (DCSR_BIU | DCSR_STRTB)) ||
+	    ((dcsr & (DCSR_BIU | DCSR_STRTA)) == 0)) {
+		dbsx = DMA_DBSA;
+		dbtx = DMA_DBTA;
+		dcsr = DCSR_STRTA | DCSR_IE | DCSR_RUN;
+	} else {
+		dbsx = DMA_DBSB;
+		dbtx = DMA_DBTB;
+		dcsr = DCSR_STRTB | DCSR_IE | DCSR_RUN;
+	}
+
+	writel_relaxed(sg->addr, base + dbsx);
+	writel_relaxed(sg->len, base + dbtx);
+	writel(dcsr, base + DMA_DCSR_S);
+
+	dev_dbg(p->dev->slave.dev, "pchan %u: load: DCSR:%02x DBS%c:%08x DBT%c:%08x\n",
+		p->num, dcsr,
+		'A' + (dbsx == DMA_DBSB), sg->addr,
+		'A' + (dbtx == DMA_DBTB), sg->len);
+}
+
+static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p,
+	struct sa11x0_dma_chan *c)
+{
+	struct sa11x0_dma_desc *txd = p->txd_done;
+
+	if (++p->sg_done == txd->sglen) {
+		struct sa11x0_dma_dev *d = p->dev;
+
+		dev_vdbg(d->slave.dev, "pchan %u: txd %p[%x]: completed\n",
+			p->num, p->txd_done, p->txd_done->tx.cookie);
+
+		c->lc = txd->tx.cookie;
+
+		spin_lock(&d->lock);
+		list_add_tail(&txd->node, &d->desc_complete);
+		spin_unlock(&d->lock);
+
+		p->sg_done = 0;
+		p->txd_done = p->txd_load;
+
+		tasklet_schedule(&d->task);
+	}
+
+	sa11x0_dma_start_sg(p, c);
+}
+
+static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id)
+{
+	struct sa11x0_dma_phy *p = dev_id;
+	struct sa11x0_dma_dev *d = p->dev;
+	struct sa11x0_dma_chan *c;
+	u32 dcsr;
+
+	dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+	if (!(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB)))
+		return IRQ_NONE;
+
+	/* Clear reported status bits */
+	writel_relaxed(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB),
+		p->base + DMA_DCSR_C);
+
+	dev_dbg(d->slave.dev, "pchan %u: irq: DCSR:%02x\n", p->num, dcsr);
+
+	if (dcsr & DCSR_ERROR) {
+		dev_err(d->slave.dev, "pchan %u: error. DCSR:%02x DDAR:%08x DBSA:%08x DBTA:%08x DBSB:%08x DBTB:%08x\n",
+			p->num, dcsr,
+			readl_relaxed(p->base + DMA_DDAR),
+			readl_relaxed(p->base + DMA_DBSA),
+			readl_relaxed(p->base + DMA_DBTA),
+			readl_relaxed(p->base + DMA_DBSB),
+			readl_relaxed(p->base + DMA_DBTB));
+	}
+
+	c = p->vchan;
+	if (c) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&c->lock, flags);
+		/*
+		 * Now that we're holding the lock, check that the vchan
+		 * really is associated with this pchan before touching the
+		 * hardware.  This should always succeed, because we won't
+		 * change p->vchan or c->phy while the channel is actively
+		 * transferring.
+		 */
+		if (c->phy == p) {
+			if (dcsr & DCSR_DONEA)
+				sa11x0_dma_complete(p, c);
+			if (dcsr & DCSR_DONEB)
+				sa11x0_dma_complete(p, c);
+		}
+		spin_unlock_irqrestore(&c->lock, flags);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void sa11x0_dma_start_txd(struct sa11x0_dma_chan *c)
+{
+	struct sa11x0_dma_desc *txd = sa11x0_dma_next_desc(c);
+
+	/* If the issued list is empty, we have no further txds to process */
+	if (txd) {
+		struct sa11x0_dma_phy *p = c->phy;
+
+		sa11x0_dma_start_desc(p, txd);
+		p->txd_done = txd;
+		p->sg_done = 0;
+
+		/* The channel should not have any transfers started */
+		WARN_ON(readl_relaxed(p->base + DMA_DCSR_R) &
+				      (DCSR_STRTA | DCSR_STRTB));
+
+		/* Clear the run and start bits before changing DDAR */
+		writel_relaxed(DCSR_RUN | DCSR_STRTA | DCSR_STRTB,
+			       p->base + DMA_DCSR_C);
+		writel_relaxed(txd->ddar, p->base + DMA_DDAR);
+
+		/* Try to start both buffers */
+		sa11x0_dma_start_sg(p, c);
+		sa11x0_dma_start_sg(p, c);
+	}
+}
+
+static void sa11x0_dma_tasklet(unsigned long arg)
+{
+	struct sa11x0_dma_dev *d = (struct sa11x0_dma_dev *)arg;
+	struct sa11x0_dma_phy *p;
+	struct sa11x0_dma_chan *c;
+	struct sa11x0_dma_desc *txd, *txn;
+	LIST_HEAD(head);
+	unsigned pch, pch_alloc = 0;
+
+	dev_dbg(d->slave.dev, "tasklet enter\n");
+
+	/* Get the completed tx descriptors */
+	spin_lock_irq(&d->lock);
+	list_splice_init(&d->desc_complete, &head);
+	spin_unlock_irq(&d->lock);
+
+	list_for_each_entry(txd, &head, node) {
+		c = to_sa11x0_dma_chan(txd->tx.chan);
+
+		dev_dbg(d->slave.dev, "vchan %p: txd %p[%x] completed\n",
+			c, txd, txd->tx.cookie);
+
+		spin_lock_irq(&c->lock);
+		p = c->phy;
+		if (p) {
+			if (!p->txd_done)
+				sa11x0_dma_start_txd(c);
+			if (!p->txd_done) {
+				/* No current txd associated with this channel */
+				dev_dbg(d->slave.dev, "pchan %u: free\n", p->num);
+
+				/* Mark this channel free */
+				c->phy = NULL;
+				p->vchan = NULL;
+			}
+		}
+		spin_unlock_irq(&c->lock);
+	}
+
+	spin_lock_irq(&d->lock);
+	for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+		p = &d->phy[pch];
+
+		if (p->vchan == NULL && !list_empty(&d->chan_pending)) {
+			c = list_first_entry(&d->chan_pending,
+				struct sa11x0_dma_chan, node);
+			list_del_init(&c->node);
+
+			pch_alloc |= 1 << pch;
+
+			/* Mark this channel allocated */
+			p->vchan = c;
+
+			dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, c);
+		}
+	}
+	spin_unlock_irq(&d->lock);
+
+	for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+		if (pch_alloc & (1 << pch)) {
+			p = &d->phy[pch];
+			c = p->vchan;
+
+			spin_lock_irq(&c->lock);
+			c->phy = p;
+
+			sa11x0_dma_start_txd(c);
+			spin_unlock_irq(&c->lock);
+		}
+	}
+
+	/* Now free the completed tx descriptor, and call their callbacks */
+	list_for_each_entry_safe(txd, txn, &head, node) {
+		dma_async_tx_callback callback = txd->tx.callback;
+		void *callback_param = txd->tx.callback_param;
+
+		dev_dbg(d->slave.dev, "txd %p[%x]: callback and free\n",
+			txd, txd->tx.cookie);
+
+		kfree(txd);
+
+		if (callback)
+			callback(callback_param);
+	}
+
+	dev_dbg(d->slave.dev, "tasklet exit\n");
+}
+
+
+static void sa11x0_dma_desc_free(struct sa11x0_dma_dev *d, struct list_head *head)
+{
+	struct sa11x0_dma_desc *txd, *txn;
+
+	list_for_each_entry_safe(txd, txn, head, node) {
+		dev_dbg(d->slave.dev, "txd %p: freeing\n", txd);
+		kfree(txd);
+	}
+}
+
+static int sa11x0_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+	return 0;
+}
+
+static void sa11x0_dma_free_chan_resources(struct dma_chan *chan)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&c->lock, flags);
+	spin_lock(&d->lock);
+	list_del_init(&c->node);
+	spin_unlock(&d->lock);
+
+	list_splice_tail_init(&c->desc_submitted, &head);
+	list_splice_tail_init(&c->desc_issued, &head);
+	spin_unlock_irqrestore(&c->lock, flags);
+
+	sa11x0_dma_desc_free(d, &head);
+}
+
+static dma_addr_t sa11x0_dma_pos(struct sa11x0_dma_phy *p)
+{
+	unsigned reg;
+	u32 dcsr;
+
+	dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+
+	if ((dcsr & (DCSR_BIU | DCSR_STRTA)) == DCSR_STRTA ||
+	    (dcsr & (DCSR_BIU | DCSR_STRTB)) == DCSR_BIU)
+		reg = DMA_DBSA;
+	else
+		reg = DMA_DBSB;
+
+	return readl_relaxed(p->base + reg);
+}
+
+static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan,
+	dma_cookie_t cookie, struct dma_tx_state *state)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+	struct sa11x0_dma_phy *p;
+	struct sa11x0_dma_desc *txd;
+	dma_cookie_t last_used, last_complete;
+	unsigned long flags;
+	enum dma_status ret;
+	size_t bytes = 0;
+
+	last_used = c->chan.cookie;
+	last_complete = c->lc;
+
+	ret = dma_async_is_complete(cookie, last_complete, last_used);
+	if (ret == DMA_SUCCESS) {
+		dma_set_tx_state(state, last_complete, last_used, 0);
+		return ret;
+	}
+
+	spin_lock_irqsave(&c->lock, flags);
+	p = c->phy;
+	ret = c->status;
+	if (p) {
+		dma_addr_t addr = sa11x0_dma_pos(p);
+
+		dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr);
+
+		txd = p->txd_done;
+		if (txd) {
+			unsigned i;
+
+			for (i = 0; i < txd->sglen; i++) {
+				dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n",
+					i, txd->sg[i].addr, txd->sg[i].len);
+				if (addr >= txd->sg[i].addr &&
+				    addr < txd->sg[i].addr + txd->sg[i].len) {
+					unsigned len;
+
+					len = txd->sg[i].len -
+						(addr - txd->sg[i].addr);
+					dev_vdbg(d->slave.dev, "tx_status: [%u] +%x\n",
+						i, len);
+					bytes += len;
+					i++;
+					break;
+				}
+			}
+			for (; i < txd->sglen; i++) {
+				dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x ++\n",
+					i, txd->sg[i].addr, txd->sg[i].len);
+				bytes += txd->sg[i].len;
+			}
+		}
+		if (txd != p->txd_load && p->txd_load)
+			bytes += p->txd_load->size;
+	}
+	list_for_each_entry(txd, &c->desc_issued, node) {
+		bytes += txd->size;
+	}
+	spin_unlock_irqrestore(&c->lock, flags);
+
+	dma_set_tx_state(state, last_complete, last_used, bytes);
+
+	dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", bytes);
+
+	return ret;
+}
+
+/*
+ * Move pending txds to the issued list, and re-init pending list.
+ * If not already pending, add this channel to the list of pending
+ * channels and trigger the tasklet to run.
+ */
+static void sa11x0_dma_issue_pending(struct dma_chan *chan)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->lock, flags);
+	list_splice_tail_init(&c->desc_submitted, &c->desc_issued);
+	if (!list_empty(&c->desc_issued)) {
+		spin_lock(&d->lock);
+		if (!c->phy && list_empty(&c->node)) {
+			list_add_tail(&c->node, &d->chan_pending);
+			tasklet_schedule(&d->task);
+			dev_dbg(d->slave.dev, "vchan %p: issued\n", c);
+		}
+		spin_unlock(&d->lock);
+	} else
+		dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", c);
+	spin_unlock_irqrestore(&c->lock, flags);
+}
+
+static dma_cookie_t sa11x0_dma_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(tx->chan);
+	struct sa11x0_dma_desc *txd = to_sa11x0_dma_tx(tx);
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->lock, flags);
+	c->chan.cookie += 1;
+	if (c->chan.cookie < 0)
+		c->chan.cookie = 1;
+	txd->tx.cookie = c->chan.cookie;
+
+	list_add_tail(&txd->node, &c->desc_submitted);
+	spin_unlock_irqrestore(&c->lock, flags);
+
+	dev_dbg(tx->chan->device->dev, "vchan %p: txd %p[%x]: submitted\n",
+		c, txd, txd->tx.cookie);
+
+	return txd->tx.cookie;
+}
+
+static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg(
+	struct dma_chan *chan, struct scatterlist *sg, unsigned int sglen,
+	enum dma_transfer_direction dir, unsigned long flags)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_desc *txd;
+	struct scatterlist *sgent;
+	unsigned i, j = sglen;
+	size_t size = 0;
+
+	/* SA11x0 channels can only operate in their native direction */
+	if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) {
+		dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n",
+			c, c->ddar, dir);
+		return NULL;
+	}
+
+	/* Do not allow zero-sized txds */
+	if (sglen == 0)
+		return NULL;
+
+	for_each_sg(sg, sgent, sglen, i) {
+		dma_addr_t addr = sg_dma_address(sgent);
+		unsigned int len = sg_dma_len(sgent);
+
+		if (len > DMA_MAX_SIZE)
+			j += DIV_ROUND_UP(len, DMA_MAX_SIZE & ~DMA_ALIGN) - 1;
+		if (addr & DMA_ALIGN) {
+			dev_dbg(chan->device->dev, "vchan %p: bad buffer alignment: %08x\n",
+				c, addr);
+			return NULL;
+		}
+	}
+
+	txd = kzalloc(sizeof(*txd) + j * sizeof(txd->sg[0]), GFP_ATOMIC);
+	if (!txd) {
+		dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", c);
+		return NULL;
+	}
+
+	j = 0;
+	for_each_sg(sg, sgent, sglen, i) {
+		dma_addr_t addr = sg_dma_address(sgent);
+		unsigned len = sg_dma_len(sgent);
+
+		size += len;
+
+		do {
+			unsigned tlen = len;
+
+			/*
+			 * Check whether the transfer will fit.  If not, try
+			 * to split the transfer up such that we end up with
+			 * equal chunks - but make sure that we preserve the
+			 * alignment.  This avoids small segments.
+			 */
+			if (tlen > DMA_MAX_SIZE) {
+				unsigned mult = DIV_ROUND_UP(tlen,
+					DMA_MAX_SIZE & ~DMA_ALIGN);
+
+				tlen = (tlen / mult) & ~DMA_ALIGN;
+			}
+
+			txd->sg[j].addr = addr;
+			txd->sg[j].len = tlen;
+
+			addr += tlen;
+			len -= tlen;
+			j++;
+		} while (len);
+	}
+
+	dma_async_tx_descriptor_init(&txd->tx, &c->chan);
+	txd->tx.flags = flags;
+	txd->tx.tx_submit = sa11x0_dma_tx_submit;
+	txd->ddar = c->ddar;
+	txd->size = size;
+	txd->sglen = j;
+
+	dev_dbg(chan->device->dev, "vchan %p: txd %p: size %u nr %u\n",
+		c, txd, txd->size, txd->sglen);
+
+	return &txd->tx;
+}
+
+static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_config *cfg)
+{
+	u32 ddar = c->ddar & ((0xf << 4) | DDAR_RW);
+	dma_addr_t addr;
+	enum dma_slave_buswidth width;
+	u32 maxburst;
+
+	if (ddar & DDAR_RW) {
+		addr = cfg->src_addr;
+		width = cfg->src_addr_width;
+		maxburst = cfg->src_maxburst;
+	} else {
+		addr = cfg->dst_addr;
+		width = cfg->dst_addr_width;
+		maxburst = cfg->dst_maxburst;
+	}
+
+	if ((width != DMA_SLAVE_BUSWIDTH_1_BYTE &&
+	     width != DMA_SLAVE_BUSWIDTH_2_BYTES) ||
+	    (maxburst != 4 && maxburst != 8))
+		return -EINVAL;
+
+	if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
+		ddar |= DDAR_DW;
+	if (maxburst == 8)
+		ddar |= DDAR_BS;
+
+	dev_dbg(c->chan.device->dev, "vchan %p: dma_slave_config addr %x width %u burst %u\n",
+		c, addr, width, maxburst);
+
+	c->ddar = ddar | (addr & 0xf0000000) | (addr & 0x003ffffc) << 6;
+
+	return 0;
+}
+
+static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+	unsigned long arg)
+{
+	struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+	struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device);
+	struct sa11x0_dma_phy *p;
+	LIST_HEAD(head);
+	unsigned long flags;
+	int ret;
+
+	switch (cmd) {
+	case DMA_SLAVE_CONFIG:
+		return sa11x0_dma_slave_config(c, (struct dma_slave_config *)arg);
+
+	case DMA_TERMINATE_ALL:
+		dev_dbg(d->slave.dev, "vchan %p: terminate all\n", c);
+		/* Clear the tx descriptor lists */
+		spin_lock_irqsave(&c->lock, flags);
+		list_splice_tail_init(&c->desc_submitted, &head);
+		list_splice_tail_init(&c->desc_issued, &head);
+
+		p = c->phy;
+		if (p) {
+			struct sa11x0_dma_desc *txd, *txn;
+
+			dev_dbg(d->slave.dev, "pchan %u: terminating\n", p->num);
+			/* vchan is assigned to a pchan - stop the channel */
+			writel(DCSR_RUN | DCSR_IE |
+				DCSR_STRTA | DCSR_DONEA |
+				DCSR_STRTB | DCSR_DONEB,
+				p->base + DMA_DCSR_C);
+
+			list_for_each_entry_safe(txd, txn, &d->desc_complete, node)
+				if (txd->tx.chan == &c->chan)
+					list_move(&txd->node, &head);
+
+			if (p->txd_load) {
+				if (p->txd_load != p->txd_done)
+					list_add_tail(&p->txd_load->node, &head);
+				p->txd_load = NULL;
+			}
+			if (p->txd_done) {
+				list_add_tail(&p->txd_done->node, &head);
+				p->txd_done = NULL;
+			}
+			c->phy = NULL;
+			spin_lock(&d->lock);
+			p->vchan = NULL;
+			spin_unlock(&d->lock);
+			tasklet_schedule(&d->task);
+		}
+		spin_unlock_irqrestore(&c->lock, flags);
+		sa11x0_dma_desc_free(d, &head);
+		ret = 0;
+		break;
+
+	case DMA_PAUSE:
+		dev_dbg(d->slave.dev, "vchan %p: pause\n", c);
+		spin_lock_irqsave(&c->lock, flags);
+		if (c->status == DMA_IN_PROGRESS) {
+			c->status = DMA_PAUSED;
+
+			p = c->phy;
+			if (p) {
+				writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
+			} else {
+				spin_lock(&d->lock);
+				list_del_init(&c->node);
+				spin_unlock(&d->lock);
+			}
+		}
+		spin_unlock_irqrestore(&c->lock, flags);
+		ret = 0;
+		break;
+
+	case DMA_RESUME:
+		dev_dbg(d->slave.dev, "vchan %p: resume\n", c);
+		spin_lock_irqsave(&c->lock, flags);
+		if (c->status == DMA_PAUSED) {
+			c->status = DMA_IN_PROGRESS;
+
+			p = c->phy;
+			if (p) {
+				writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_S);
+			} else if (!list_empty(&c->desc_issued)) {
+				spin_lock(&d->lock);
+				list_add_tail(&c->node, &d->chan_pending);
+				spin_unlock(&d->lock);
+			}
+		}
+		spin_unlock_irqrestore(&c->lock, flags);
+		ret = 0;
+		break;
+
+	default:
+		ret = -ENXIO;
+		break;
+	}
+
+	return ret;
+}
+
+struct sa11x0_dma_channel_desc {
+	u32 ddar;
+	const char *name;
+};
+
+#define CD(d1, d2) { .ddar = DDAR_##d1 | d2, .name = #d1 }
+static const struct sa11x0_dma_channel_desc chan_desc[] = {
+	CD(Ser0UDCTr, 0),
+	CD(Ser0UDCRc, DDAR_RW),
+	CD(Ser1SDLCTr, 0),
+	CD(Ser1SDLCRc, DDAR_RW),
+	CD(Ser1UARTTr, 0),
+	CD(Ser1UARTRc, DDAR_RW),
+	CD(Ser2ICPTr, 0),
+	CD(Ser2ICPRc, DDAR_RW),
+	CD(Ser3UARTTr, 0),
+	CD(Ser3UARTRc, DDAR_RW),
+	CD(Ser4MCP0Tr, 0),
+	CD(Ser4MCP0Rc, DDAR_RW),
+	CD(Ser4MCP1Tr, 0),
+	CD(Ser4MCP1Rc, DDAR_RW),
+	CD(Ser4SSPTr, 0),
+	CD(Ser4SSPRc, DDAR_RW),
+};
+
+static int __devinit sa11x0_dma_init_dmadev(struct dma_device *dmadev,
+	struct device *dev)
+{
+	unsigned i;
+
+	dmadev->chancnt = ARRAY_SIZE(chan_desc);
+	INIT_LIST_HEAD(&dmadev->channels);
+	dmadev->dev = dev;
+	dmadev->device_alloc_chan_resources = sa11x0_dma_alloc_chan_resources;
+	dmadev->device_free_chan_resources = sa11x0_dma_free_chan_resources;
+	dmadev->device_control = sa11x0_dma_control;
+	dmadev->device_tx_status = sa11x0_dma_tx_status;
+	dmadev->device_issue_pending = sa11x0_dma_issue_pending;
+
+	for (i = 0; i < dmadev->chancnt; i++) {
+		struct sa11x0_dma_chan *c;
+
+		c = kzalloc(sizeof(*c), GFP_KERNEL);
+		if (!c) {
+			dev_err(dev, "no memory for channel %u\n", i);
+			return -ENOMEM;
+		}
+
+		c->chan.device = dmadev;
+		c->status = DMA_IN_PROGRESS;
+		c->ddar = chan_desc[i].ddar;
+		c->name = chan_desc[i].name;
+		spin_lock_init(&c->lock);
+		INIT_LIST_HEAD(&c->desc_submitted);
+		INIT_LIST_HEAD(&c->desc_issued);
+		INIT_LIST_HEAD(&c->node);
+		list_add_tail(&c->chan.device_node, &dmadev->channels);
+	}
+
+	return dma_async_device_register(dmadev);
+}
+
+static int sa11x0_dma_request_irq(struct platform_device *pdev, int nr,
+	void *data)
+{
+	int irq = platform_get_irq(pdev, nr);
+
+	if (irq <= 0)
+		return -ENXIO;
+
+	return request_irq(irq, sa11x0_dma_irq, 0, dev_name(&pdev->dev), data);
+}
+
+static void sa11x0_dma_free_irq(struct platform_device *pdev, int nr,
+	void *data)
+{
+	int irq = platform_get_irq(pdev, nr);
+	if (irq > 0)
+		free_irq(irq, data);
+}
+
+static void sa11x0_dma_free_channels(struct dma_device *dmadev)
+{
+	struct sa11x0_dma_chan *c, *cn;
+
+	list_for_each_entry_safe(c, cn, &dmadev->channels, chan.device_node) {
+		list_del(&c->chan.device_node);
+		kfree(c);
+	}
+}
+
+static int __devinit sa11x0_dma_probe(struct platform_device *pdev)
+{
+	struct sa11x0_dma_dev *d;
+	struct resource *res;
+	unsigned i;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
+	d = kzalloc(sizeof(*d), GFP_KERNEL);
+	if (!d) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	spin_lock_init(&d->lock);
+	INIT_LIST_HEAD(&d->chan_pending);
+	INIT_LIST_HEAD(&d->desc_complete);
+
+	d->base = ioremap(res->start, resource_size(res));
+	if (!d->base) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	tasklet_init(&d->task, sa11x0_dma_tasklet, (unsigned long)d);
+
+	for (i = 0; i < NR_PHY_CHAN; i++) {
+		struct sa11x0_dma_phy *p = &d->phy[i];
+
+		p->dev = d;
+		p->num = i;
+		p->base = d->base + i * DMA_SIZE;
+		writel_relaxed(DCSR_RUN | DCSR_IE | DCSR_ERROR |
+			DCSR_DONEA | DCSR_STRTA | DCSR_DONEB | DCSR_STRTB,
+			p->base + DMA_DCSR_C);
+		writel_relaxed(0, p->base + DMA_DDAR);
+
+		ret = sa11x0_dma_request_irq(pdev, i, p);
+		if (ret) {
+			while (i) {
+				i--;
+				sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
+			}
+			goto err_irq;
+		}
+	}
+
+	dma_cap_set(DMA_SLAVE, d->slave.cap_mask);
+	d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg;
+	ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev);
+	if (ret) {
+		dev_warn(d->slave.dev, "failed to register slave async device: %d\n",
+			ret);
+		goto err_slave_reg;
+	}
+
+	platform_set_drvdata(pdev, d);
+	return 0;
+
+ err_slave_reg:
+	sa11x0_dma_free_channels(&d->slave);
+	for (i = 0; i < NR_PHY_CHAN; i++)
+		sa11x0_dma_free_irq(pdev, i, &d->phy[i]);
+ err_irq:
+	tasklet_kill(&d->task);
+	iounmap(d->base);
+ err_ioremap:
+	kfree(d);
+ err_alloc:
+	return ret;
+}
+
+static int __devexit sa11x0_dma_remove(struct platform_device *pdev)
+{
+	struct sa11x0_dma_dev *d = platform_get_drvdata(pdev);
+	unsigned pch;
+
+	dma_async_device_unregister(&d->slave);
+
+	sa11x0_dma_free_channels(&d->slave);
+	for (pch = 0; pch < NR_PHY_CHAN; pch++)
+		sa11x0_dma_free_irq(pdev, pch, &d->phy[pch]);
+	tasklet_kill(&d->task);
+	iounmap(d->base);
+	kfree(d);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sa11x0_dma_suspend(struct device *dev)
+{
+	struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
+	unsigned pch;
+
+	for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+		struct sa11x0_dma_phy *p = &d->phy[pch];
+		u32 dcsr, saved_dcsr;
+
+		dcsr = saved_dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+		if (dcsr & DCSR_RUN) {
+			writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C);
+			dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+		}
+
+		saved_dcsr &= DCSR_RUN | DCSR_IE;
+		if (dcsr & DCSR_BIU) {
+			p->dbs[0] = readl_relaxed(p->base + DMA_DBSB);
+			p->dbt[0] = readl_relaxed(p->base + DMA_DBTB);
+			p->dbs[1] = readl_relaxed(p->base + DMA_DBSA);
+			p->dbt[1] = readl_relaxed(p->base + DMA_DBTA);
+			saved_dcsr |= (dcsr & DCSR_STRTA ? DCSR_STRTB : 0) |
+				      (dcsr & DCSR_STRTB ? DCSR_STRTA : 0);
+		} else {
+			p->dbs[0] = readl_relaxed(p->base + DMA_DBSA);
+			p->dbt[0] = readl_relaxed(p->base + DMA_DBTA);
+			p->dbs[1] = readl_relaxed(p->base + DMA_DBSB);
+			p->dbt[1] = readl_relaxed(p->base + DMA_DBTB);
+			saved_dcsr |= dcsr & (DCSR_STRTA | DCSR_STRTB);
+		}
+		p->dcsr = saved_dcsr;
+
+		writel(DCSR_STRTA | DCSR_STRTB, p->base + DMA_DCSR_C);
+	}
+
+	return 0;
+}
+
+static int sa11x0_dma_resume(struct device *dev)
+{
+	struct sa11x0_dma_dev *d = dev_get_drvdata(dev);
+	unsigned pch;
+
+	for (pch = 0; pch < NR_PHY_CHAN; pch++) {
+		struct sa11x0_dma_phy *p = &d->phy[pch];
+		struct sa11x0_dma_desc *txd = NULL;
+		u32 dcsr = readl_relaxed(p->base + DMA_DCSR_R);
+
+		WARN_ON(dcsr & (DCSR_BIU | DCSR_STRTA | DCSR_STRTB | DCSR_RUN));
+
+		if (p->txd_done)
+			txd = p->txd_done;
+		else if (p->txd_load)
+			txd = p->txd_load;
+
+		if (!txd)
+			continue;
+
+		writel_relaxed(txd->ddar, p->base + DMA_DDAR);
+
+		writel_relaxed(p->dbs[0], p->base + DMA_DBSA);
+		writel_relaxed(p->dbt[0], p->base + DMA_DBTA);
+		writel_relaxed(p->dbs[1], p->base + DMA_DBSB);
+		writel_relaxed(p->dbt[1], p->base + DMA_DBTB);
+		writel_relaxed(p->dcsr, p->base + DMA_DCSR_S);
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops sa11x0_dma_pm_ops = {
+	.suspend_noirq = sa11x0_dma_suspend,
+	.resume_noirq = sa11x0_dma_resume,
+	.freeze_noirq = sa11x0_dma_suspend,
+	.thaw_noirq = sa11x0_dma_resume,
+	.poweroff_noirq = sa11x0_dma_suspend,
+	.restore_noirq = sa11x0_dma_resume,
+};
+
+static struct platform_driver sa11x0_dma_driver = {
+	.driver = {
+		.name	= "sa11x0-dma",
+		.owner	= THIS_MODULE,
+		.pm	= &sa11x0_dma_pm_ops,
+	},
+	.probe		= sa11x0_dma_probe,
+	.remove		= __devexit_p(sa11x0_dma_remove),
+};
+
+bool sa11x0_dma_filter_fn(struct dma_chan *chan, void *param)
+{
+	if (chan->device->dev->driver == &sa11x0_dma_driver.driver) {
+		struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
+		const char *p = param;
+
+		return !strcmp(c->name, p);
+	}
+	return false;
+}
+EXPORT_SYMBOL(sa11x0_dma_filter_fn);
+
+static int __init sa11x0_dma_init(void)
+{
+	return platform_driver_register(&sa11x0_dma_driver);
+}
+subsys_initcall(sa11x0_dma_init);
+
+static void __exit sa11x0_dma_exit(void)
+{
+	platform_driver_unregister(&sa11x0_dma_driver);
+}
+module_exit(sa11x0_dma_exit);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("SA-11x0 DMA driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sa11x0-dma");
diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c
index 7eecf69362ee..8ea3b33d4b40 100644
--- a/drivers/gpio/gpio-sa1100.c
+++ b/drivers/gpio/gpio-sa1100.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index eeafc30b207b..9d639fa1afbd 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -27,6 +27,7 @@
 
 #include <mach/jornada720.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 8b44ddc8041c..58b224498b35 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -36,7 +36,6 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/system.h>
@@ -46,6 +45,11 @@ MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:kart");
 
+struct rpckbd_data {
+	int tx_irq;
+	int rx_irq;
+};
+
 static int rpckbd_write(struct serio *port, unsigned char val)
 {
 	while (!(iomd_readb(IOMD_KCTRL) & (1 << 7)))
@@ -78,19 +82,21 @@ static irqreturn_t rpckbd_tx(int irq, void *dev_id)
 
 static int rpckbd_open(struct serio *port)
 {
+	struct rpckbd_data *rpckbd = port->port_data;
+
 	/* Reset the keyboard state machine. */
 	iomd_writeb(0, IOMD_KCTRL);
 	iomd_writeb(8, IOMD_KCTRL);
 	iomd_readb(IOMD_KARTRX);
 
-	if (request_irq(IRQ_KEYBOARDRX, rpckbd_rx, 0, "rpckbd", port) != 0) {
+	if (request_irq(rpckbd->rx_irq, rpckbd_rx, 0, "rpckbd", port) != 0) {
 		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ\n");
 		return -EBUSY;
 	}
 
-	if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", port) != 0) {
+	if (request_irq(rpckbd->tx_irq, rpckbd_tx, 0, "rpckbd", port) != 0) {
 		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n");
-		free_irq(IRQ_KEYBOARDRX, port);
+		free_irq(rpckbd->rx_irq, port);
 		return -EBUSY;
 	}
 
@@ -99,8 +105,10 @@ static int rpckbd_open(struct serio *port)
 
 static void rpckbd_close(struct serio *port)
 {
-	free_irq(IRQ_KEYBOARDRX, port);
-	free_irq(IRQ_KEYBOARDTX, port);
+	struct rpckbd_data *rpckbd = port->port_data;
+
+	free_irq(rpckbd->rx_irq, port);
+	free_irq(rpckbd->tx_irq, port);
 }
 
 /*
@@ -109,17 +117,35 @@ static void rpckbd_close(struct serio *port)
  */
 static int __devinit rpckbd_probe(struct platform_device *dev)
 {
+	struct rpckbd_data *rpckbd;
 	struct serio *serio;
+	int tx_irq, rx_irq;
+
+	rx_irq = platform_get_irq(dev, 0);
+	if (rx_irq <= 0)
+		return rx_irq < 0 ? rx_irq : -ENXIO;
+
+	tx_irq = platform_get_irq(dev, 1);
+	if (tx_irq <= 0)
+		return tx_irq < 0 ? tx_irq : -ENXIO;
 
 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-	if (!serio)
+	rpckbd = kzalloc(sizeof(*rpckbd), GFP_KERNEL);
+	if (!serio || !rpckbd) {
+		kfree(rpckbd);
+		kfree(serio);
 		return -ENOMEM;
+	}
+
+	rpckbd->rx_irq = rx_irq;
+	rpckbd->tx_irq = tx_irq;
 
 	serio->id.type		= SERIO_8042;
 	serio->write		= rpckbd_write;
 	serio->open		= rpckbd_open;
 	serio->close		= rpckbd_close;
 	serio->dev.parent	= &dev->dev;
+	serio->port_data	= rpckbd;
 	strlcpy(serio->name, "RiscPC PS/2 kbd port", sizeof(serio->name));
 	strlcpy(serio->phys, "rpckbd/serio0", sizeof(serio->phys));
 
@@ -131,7 +157,11 @@ static int __devinit rpckbd_probe(struct platform_device *dev)
 static int __devexit rpckbd_remove(struct platform_device *dev)
 {
 	struct serio *serio = platform_get_drvdata(dev);
+	struct rpckbd_data *rpckbd = serio->port_data;
+
 	serio_unregister_port(serio);
+	kfree(rpckbd);
+
 	return 0;
 }
 
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 44fc8b4bcd81..5ebabe3fc845 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -24,6 +24,26 @@
 
 #include <asm/hardware/sa1111.h>
 
+#define PS2CR		0x0000
+#define PS2STAT		0x0004
+#define PS2DATA		0x0008
+#define PS2CLKDIV	0x000c
+#define PS2PRECNT	0x0010
+
+#define PS2CR_ENA	0x08
+#define PS2CR_FKD	0x02
+#define PS2CR_FKC	0x01
+
+#define PS2STAT_STP	0x0100
+#define PS2STAT_TXE	0x0080
+#define PS2STAT_TXB	0x0040
+#define PS2STAT_RXF	0x0020
+#define PS2STAT_RXB	0x0010
+#define PS2STAT_ENA	0x0008
+#define PS2STAT_RXP	0x0004
+#define PS2STAT_KBD	0x0002
+#define PS2STAT_KBC	0x0001
+
 struct ps2if {
 	struct serio		*io;
 	struct sa1111_dev	*dev;
@@ -45,22 +65,22 @@ static irqreturn_t ps2_rxint(int irq, void *dev_id)
 	struct ps2if *ps2if = dev_id;
 	unsigned int scancode, flag, status;
 
-	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+	status = sa1111_readl(ps2if->base + PS2STAT);
 	while (status & PS2STAT_RXF) {
 		if (status & PS2STAT_STP)
-			sa1111_writel(PS2STAT_STP, ps2if->base + SA1111_PS2STAT);
+			sa1111_writel(PS2STAT_STP, ps2if->base + PS2STAT);
 
 		flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) |
 		       (status & PS2STAT_RXP ? 0 : SERIO_PARITY);
 
-		scancode = sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff;
+		scancode = sa1111_readl(ps2if->base + PS2DATA) & 0xff;
 
 		if (hweight8(scancode) & 1)
 			flag ^= SERIO_PARITY;
 
 		serio_interrupt(ps2if->io, scancode, flag);
 
-		status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+		status = sa1111_readl(ps2if->base + PS2STAT);
         }
 
         return IRQ_HANDLED;
@@ -75,12 +95,12 @@ static irqreturn_t ps2_txint(int irq, void *dev_id)
 	unsigned int status;
 
 	spin_lock(&ps2if->lock);
-	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+	status = sa1111_readl(ps2if->base + PS2STAT);
 	if (ps2if->head == ps2if->tail) {
 		disable_irq_nosync(irq);
 		/* done */
 	} else if (status & PS2STAT_TXE) {
-		sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
+		sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA);
 		ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1);
 	}
 	spin_unlock(&ps2if->lock);
@@ -103,8 +123,8 @@ static int ps2_write(struct serio *io, unsigned char val)
 	/*
 	 * If the TX register is empty, we can go straight out.
 	 */
-	if (sa1111_readl(ps2if->base + SA1111_PS2STAT) & PS2STAT_TXE) {
-		sa1111_writel(val, ps2if->base + SA1111_PS2DATA);
+	if (sa1111_readl(ps2if->base + PS2STAT) & PS2STAT_TXE) {
+		sa1111_writel(val, ps2if->base + PS2DATA);
 	} else {
 		if (ps2if->head == ps2if->tail)
 			enable_irq(ps2if->dev->irq[1]);
@@ -124,13 +144,16 @@ static int ps2_open(struct serio *io)
 	struct ps2if *ps2if = io->port_data;
 	int ret;
 
-	sa1111_enable_device(ps2if->dev);
+	ret = sa1111_enable_device(ps2if->dev);
+	if (ret)
+		return ret;
 
 	ret = request_irq(ps2if->dev->irq[0], ps2_rxint, 0,
 			  SA1111_DRIVER_NAME(ps2if->dev), ps2if);
 	if (ret) {
 		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
 			ps2if->dev->irq[0], ret);
+		sa1111_disable_device(ps2if->dev);
 		return ret;
 	}
 
@@ -140,6 +163,7 @@ static int ps2_open(struct serio *io)
 		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
 			ps2if->dev->irq[1], ret);
 		free_irq(ps2if->dev->irq[0], ps2if);
+		sa1111_disable_device(ps2if->dev);
 		return ret;
 	}
 
@@ -147,7 +171,7 @@ static int ps2_open(struct serio *io)
 
 	enable_irq_wake(ps2if->dev->irq[0]);
 
-	sa1111_writel(PS2CR_ENA, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(PS2CR_ENA, ps2if->base + PS2CR);
 	return 0;
 }
 
@@ -155,7 +179,7 @@ static void ps2_close(struct serio *io)
 {
 	struct ps2if *ps2if = io->port_data;
 
-	sa1111_writel(0, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(0, ps2if->base + PS2CR);
 
 	disable_irq_wake(ps2if->dev->irq[0]);
 
@@ -175,7 +199,7 @@ static void __devinit ps2_clear_input(struct ps2if *ps2if)
 	int maxread = 100;
 
 	while (maxread--) {
-		if ((sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff) == 0xff)
+		if ((sa1111_readl(ps2if->base + PS2DATA) & 0xff) == 0xff)
 			break;
 	}
 }
@@ -185,11 +209,11 @@ static unsigned int __devinit ps2_test_one(struct ps2if *ps2if,
 {
 	unsigned int val;
 
-	sa1111_writel(PS2CR_ENA | mask, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(PS2CR_ENA | mask, ps2if->base + PS2CR);
 
 	udelay(2);
 
-	val = sa1111_readl(ps2if->base + SA1111_PS2STAT);
+	val = sa1111_readl(ps2if->base + PS2STAT);
 	return val & (PS2STAT_KBC | PS2STAT_KBD);
 }
 
@@ -220,7 +244,7 @@ static int __devinit ps2_test(struct ps2if *ps2if)
 		ret = -ENODEV;
 	}
 
-	sa1111_writel(0, ps2if->base + SA1111_PS2CR);
+	sa1111_writel(0, ps2if->base + PS2CR);
 
 	return ret;
 }
@@ -274,8 +298,8 @@ static int __devinit ps2_probe(struct sa1111_dev *dev)
 	sa1111_enable_device(ps2if->dev);
 
 	/* Incoming clock is 8MHz */
-	sa1111_writel(0, ps2if->base + SA1111_PS2CLKDIV);
-	sa1111_writel(127, ps2if->base + SA1111_PS2PRECNT);
+	sa1111_writel(0, ps2if->base + PS2CLKDIV);
+	sa1111_writel(127, ps2if->base + PS2PRECNT);
 
 	/*
 	 * Flush any pending input.
@@ -330,6 +354,7 @@ static int __devexit ps2_remove(struct sa1111_dev *dev)
 static struct sa1111_driver ps2_driver = {
 	.drv = {
 		.name	= "sa1111-ps2",
+		.owner	= THIS_MODULE,
 	},
 	.devid		= SA1111_DEVID_PS2,
 	.probe		= ps2_probe,
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index c3848ad2325b..d9be6eac99b1 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -22,6 +22,7 @@
 
 #include <mach/hardware.h>
 #include <mach/jornada720.h>
+#include <mach/irqs.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1489c3540f96..243e0c663c37 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -848,8 +848,9 @@ config MCP_SA11X0
 
 # Chip drivers
 config MCP_UCB1200
-	tristate "Support for UCB1200 / UCB1300"
-	depends on MCP
+	bool "Support for UCB1200 / UCB1300"
+	depends on MCP_SA11X0
+	select MCP
 
 config MCP_UCB1200_TS
 	tristate "Touchscreen interface support"
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 86cc3f7841cd..6acf2e03f2ba 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -19,7 +19,6 @@
 #include <linux/string.h>
 #include <linux/mfd/mcp.h>
 
-#include <mach/dma.h>
 #include <asm/system.h>
 
 
@@ -48,39 +47,11 @@ static int mcp_bus_remove(struct device *dev)
 	return 0;
 }
 
-static int mcp_bus_suspend(struct device *dev, pm_message_t state)
-{
-	struct mcp *mcp = to_mcp(dev);
-	int ret = 0;
-
-	if (dev->driver) {
-		struct mcp_driver *drv = to_mcp_driver(dev->driver);
-
-		ret = drv->suspend(mcp, state);
-	}
-	return ret;
-}
-
-static int mcp_bus_resume(struct device *dev)
-{
-	struct mcp *mcp = to_mcp(dev);
-	int ret = 0;
-
-	if (dev->driver) {
-		struct mcp_driver *drv = to_mcp_driver(dev->driver);
-
-		ret = drv->resume(mcp);
-	}
-	return ret;
-}
-
 static struct bus_type mcp_bus_type = {
 	.name		= "mcp",
 	.match		= mcp_bus_match,
 	.probe		= mcp_bus_probe,
 	.remove		= mcp_bus_remove,
-	.suspend	= mcp_bus_suspend,
-	.resume		= mcp_bus_resume,
 };
 
 /**
@@ -208,6 +179,7 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
 	mcp = kzalloc(sizeof(struct mcp) + size, GFP_KERNEL);
 	if (mcp) {
 		spin_lock_init(&mcp->lock);
+		device_initialize(&mcp->attached_device);
 		mcp->attached_device.parent = parent;
 		mcp->attached_device.bus = &mcp_bus_type;
 		mcp->attached_device.dma_mask = parent->dma_mask;
@@ -217,18 +189,25 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
 }
 EXPORT_SYMBOL(mcp_host_alloc);
 
-int mcp_host_register(struct mcp *mcp)
+int mcp_host_add(struct mcp *mcp, void *pdata)
 {
+	mcp->attached_device.platform_data = pdata;
 	dev_set_name(&mcp->attached_device, "mcp0");
-	return device_register(&mcp->attached_device);
+	return device_add(&mcp->attached_device);
+}
+EXPORT_SYMBOL(mcp_host_add);
+
+void mcp_host_del(struct mcp *mcp)
+{
+	device_del(&mcp->attached_device);
 }
-EXPORT_SYMBOL(mcp_host_register);
+EXPORT_SYMBOL(mcp_host_del);
 
-void mcp_host_unregister(struct mcp *mcp)
+void mcp_host_free(struct mcp *mcp)
 {
-	device_unregister(&mcp->attached_device);
+	put_device(&mcp->attached_device);
 }
-EXPORT_SYMBOL(mcp_host_unregister);
+EXPORT_SYMBOL(mcp_host_free);
 
 int mcp_driver_register(struct mcp_driver *mcpdrv)
 {
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 02c53a0766c4..1c0ceacaa1f6 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -13,51 +13,61 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/mfd/mcp.h>
 
-#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
 #include <mach/mcp.h>
 
-#include <mach/assabet.h>
-
+#define DRIVER_NAME "sa11x0-mcp"
 
 struct mcp_sa11x0 {
-	u32	mccr0;
-	u32	mccr1;
+	void __iomem	*base0;
+	void __iomem	*base1;
+	u32		mccr0;
+	u32		mccr1;
 };
 
+/* Register offsets */
+#define MCCR0(m)	((m)->base0 + 0x00)
+#define MCDR0(m)	((m)->base0 + 0x08)
+#define MCDR1(m)	((m)->base0 + 0x0c)
+#define MCDR2(m)	((m)->base0 + 0x10)
+#define MCSR(m)		((m)->base0 + 0x18)
+#define MCCR1(m)	((m)->base1 + 0x00)
+
 #define priv(mcp)	((struct mcp_sa11x0 *)mcp_priv(mcp))
 
 static void
 mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	unsigned int mccr0;
+	struct mcp_sa11x0 *m = priv(mcp);
 
 	divisor /= 32;
 
-	mccr0 = Ser4MCCR0 & ~0x00007f00;
-	mccr0 |= divisor << 8;
-	Ser4MCCR0 = mccr0;
+	m->mccr0 &= ~0x00007f00;
+	m->mccr0 |= divisor << 8;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 static void
 mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
 {
-	unsigned int mccr0;
+	struct mcp_sa11x0 *m = priv(mcp);
 
 	divisor /= 32;
 
-	mccr0 = Ser4MCCR0 & ~0x0000007f;
-	mccr0 |= divisor;
-	Ser4MCCR0 = mccr0;
+	m->mccr0 &= ~0x0000007f;
+	m->mccr0 |= divisor;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 /*
@@ -69,14 +79,15 @@ mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
 static void
 mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
 {
+	struct mcp_sa11x0 *m = priv(mcp);
 	int ret = -ETIME;
 	int i;
 
-	Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
+	writel_relaxed(reg << 17 | MCDR2_Wr | (val & 0xffff), MCDR2(m));
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		if (Ser4MCSR & MCSR_CWC) {
+		if (readl_relaxed(MCSR(m)) & MCSR_CWC) {
 			ret = 0;
 			break;
 		}
@@ -95,15 +106,16 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
 static unsigned int
 mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 {
+	struct mcp_sa11x0 *m = priv(mcp);
 	int ret = -ETIME;
 	int i;
 
-	Ser4MCDR2 = reg << 17 | MCDR2_Rd;
+	writel_relaxed(reg << 17 | MCDR2_Rd, MCDR2(m));
 
 	for (i = 0; i < 2; i++) {
 		udelay(mcp->rw_timeout);
-		if (Ser4MCSR & MCSR_CRC) {
-			ret = Ser4MCDR2 & 0xffff;
+		if (readl_relaxed(MCSR(m)) & MCSR_CRC) {
+			ret = readl_relaxed(MCDR2(m)) & 0xffff;
 			break;
 		}
 	}
@@ -116,13 +128,19 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 
 static void mcp_sa11x0_enable(struct mcp *mcp)
 {
-	Ser4MCSR = -1;
-	Ser4MCCR0 |= MCCR0_MCE;
+	struct mcp_sa11x0 *m = priv(mcp);
+
+	writel(-1, MCSR(m));
+	m->mccr0 |= MCCR0_MCE;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 static void mcp_sa11x0_disable(struct mcp *mcp)
 {
-	Ser4MCCR0 &= ~MCCR0_MCE;
+	struct mcp_sa11x0 *m = priv(mcp);
+
+	m->mccr0 &= ~MCCR0_MCE;
+	writel_relaxed(m->mccr0, MCCR0(m));
 }
 
 /*
@@ -137,55 +155,64 @@ static struct mcp_ops mcp_sa11x0 = {
 	.disable		= mcp_sa11x0_disable,
 };
 
-static int mcp_sa11x0_probe(struct platform_device *pdev)
+static int mcp_sa11x0_probe(struct platform_device *dev)
 {
-	struct mcp_plat_data *data = pdev->dev.platform_data;
+	struct mcp_plat_data *data = dev->dev.platform_data;
+	struct resource *mem0, *mem1;
+	struct mcp_sa11x0 *m;
 	struct mcp *mcp;
 	int ret;
 
 	if (!data)
 		return -ENODEV;
 
-	if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
-		return -EBUSY;
+	mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (!mem0 || !mem1)
+		return -ENXIO;
+
+	if (!request_mem_region(mem0->start, resource_size(mem0),
+				DRIVER_NAME)) {
+		ret = -EBUSY;
+		goto err_mem0;
+	}
 
-	mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
+	if (!request_mem_region(mem1->start, resource_size(mem1),
+				DRIVER_NAME)) {
+		ret = -EBUSY;
+		goto err_mem1;
+	}
+
+	mcp = mcp_host_alloc(&dev->dev, sizeof(struct mcp_sa11x0));
 	if (!mcp) {
 		ret = -ENOMEM;
-		goto release;
+		goto err_alloc;
 	}
 
 	mcp->owner		= THIS_MODULE;
 	mcp->ops		= &mcp_sa11x0;
 	mcp->sclk_rate		= data->sclk_rate;
-	mcp->dma_audio_rd	= DMA_Ser4MCP0Rd;
-	mcp->dma_audio_wr	= DMA_Ser4MCP0Wr;
-	mcp->dma_telco_rd	= DMA_Ser4MCP1Rd;
-	mcp->dma_telco_wr	= DMA_Ser4MCP1Wr;
-	mcp->gpio_base		= data->gpio_base;
 
-	platform_set_drvdata(pdev, mcp);
+	m = priv(mcp);
+	m->mccr0 = data->mccr0 | 0x7f7f;
+	m->mccr1 = data->mccr1;
 
-	if (machine_is_assabet()) {
-		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
+	m->base0 = ioremap(mem0->start, resource_size(mem0));
+	m->base1 = ioremap(mem1->start, resource_size(mem1));
+	if (!m->base0 || !m->base1) {
+		ret = -ENOMEM;
+		goto err_ioremap;
 	}
 
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	platform_set_drvdata(dev, mcp);
 
 	/*
 	 * Initialise device.  Note that we initially
 	 * set the sampling rate to minimum.
 	 */
-	Ser4MCSR = -1;
-	Ser4MCCR1 = data->mccr1;
-	Ser4MCCR0 = data->mccr0 | 0x7f7f;
+	writel_relaxed(-1, MCSR(m));
+	writel_relaxed(m->mccr1, MCCR1(m));
+	writel_relaxed(m->mccr0, MCCR0(m));
 
 	/*
 	 * Calculate the read/write timeout (us) from the bit clock
@@ -195,62 +222,90 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
 	mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
 			  mcp->sclk_rate;
 
-	ret = mcp_host_register(mcp);
+	ret = mcp_host_add(mcp, data->codec_pdata);
 	if (ret == 0)
-		goto out;
+		return 0;
 
- release:
-	release_mem_region(0x80060000, 0x60);
-	platform_set_drvdata(pdev, NULL);
+	platform_set_drvdata(dev, NULL);
 
- out:
+ err_ioremap:
+	iounmap(m->base1);
+	iounmap(m->base0);
+	mcp_host_free(mcp);
+ err_alloc:
+	release_mem_region(mem1->start, resource_size(mem1));
+ err_mem1:
+	release_mem_region(mem0->start, resource_size(mem0));
+ err_mem0:
 	return ret;
 }
 
 static int mcp_sa11x0_remove(struct platform_device *dev)
 {
 	struct mcp *mcp = platform_get_drvdata(dev);
+	struct mcp_sa11x0 *m = priv(mcp);
+	struct resource *mem0, *mem1;
+
+	if (m->mccr0 & MCCR0_MCE)
+		dev_warn(&dev->dev,
+			 "device left active (missing disable call?)\n");
+
+	mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
 
 	platform_set_drvdata(dev, NULL);
-	mcp_host_unregister(mcp);
-	release_mem_region(0x80060000, 0x60);
+	mcp_host_del(mcp);
+	iounmap(m->base1);
+	iounmap(m->base0);
+	mcp_host_free(mcp);
+	release_mem_region(mem1->start, resource_size(mem1));
+	release_mem_region(mem0->start, resource_size(mem0));
 
 	return 0;
 }
 
-static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int mcp_sa11x0_suspend(struct device *dev)
 {
-	struct mcp *mcp = platform_get_drvdata(dev);
+	struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
+
+	if (m->mccr0 & MCCR0_MCE)
+		dev_warn(dev, "device left active (missing disable call?)\n");
 
-	priv(mcp)->mccr0 = Ser4MCCR0;
-	priv(mcp)->mccr1 = Ser4MCCR1;
-	Ser4MCCR0 &= ~MCCR0_MCE;
+	writel(m->mccr0 & ~MCCR0_MCE, MCCR0(m));
 
 	return 0;
 }
 
-static int mcp_sa11x0_resume(struct platform_device *dev)
+static int mcp_sa11x0_resume(struct device *dev)
 {
-	struct mcp *mcp = platform_get_drvdata(dev);
+	struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
 
-	Ser4MCCR1 = priv(mcp)->mccr1;
-	Ser4MCCR0 = priv(mcp)->mccr0;
+	writel_relaxed(m->mccr1, MCCR1(m));
+	writel_relaxed(m->mccr0, MCCR0(m));
 
 	return 0;
 }
-
-/*
- * The driver for the SA11x0 MCP port.
- */
-MODULE_ALIAS("platform:sa11x0-mcp");
+#endif
+
+static const struct dev_pm_ops mcp_sa11x0_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend = mcp_sa11x0_suspend,
+	.freeze = mcp_sa11x0_suspend,
+	.poweroff = mcp_sa11x0_suspend,
+	.resume_noirq = mcp_sa11x0_resume,
+	.thaw_noirq = mcp_sa11x0_resume,
+	.restore_noirq = mcp_sa11x0_resume,
+#endif
+};
 
 static struct platform_driver mcp_sa11x0_driver = {
 	.probe		= mcp_sa11x0_probe,
 	.remove		= mcp_sa11x0_remove,
-	.suspend	= mcp_sa11x0_suspend,
-	.resume		= mcp_sa11x0_resume,
 	.driver		= {
-		.name	= "sa11x0-mcp",
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &mcp_sa11x0_pm_ops,
 	},
 };
 
@@ -259,6 +314,7 @@ static struct platform_driver mcp_sa11x0_driver = {
  */
 module_platform_driver(mcp_sa11x0_driver);
 
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index cea9da60850d..b63c0756a669 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -11,14 +11,15 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
 #include <linux/fs.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
 #include <linux/proc_fs.h>
-#include <linux/device.h>
 #include <linux/mfd/ucb1x00.h>
 
-#include <mach/dma.h>
-
-
 #define UCB1X00_ATTR(name,input)\
 static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
 			   char *buf)	\
@@ -38,14 +39,45 @@ UCB1X00_ATTR(batt_temp, UCB_ADC_INP_AD2);
 
 static int ucb1x00_assabet_add(struct ucb1x00_dev *dev)
 {
-	device_create_file(&dev->ucb->dev, &dev_attr_vbatt);
-	device_create_file(&dev->ucb->dev, &dev_attr_vcharger);
-	device_create_file(&dev->ucb->dev, &dev_attr_batt_temp);
+	struct ucb1x00 *ucb = dev->ucb;
+	struct platform_device *pdev;
+	struct gpio_keys_platform_data keys;
+	static struct gpio_keys_button buttons[6];
+	unsigned i;
+
+	memset(buttons, 0, sizeof(buttons));
+	memset(&keys, 0, sizeof(keys));
+
+	for (i = 0; i < ARRAY_SIZE(buttons); i++) {
+		buttons[i].code = BTN_0 + i;
+		buttons[i].gpio = ucb->gpio.base + i;
+		buttons[i].type = EV_KEY;
+		buttons[i].can_disable = true;
+	}
+
+	keys.buttons = buttons;
+	keys.nbuttons = ARRAY_SIZE(buttons);
+	keys.poll_interval = 50;
+	keys.name = "ucb1x00";
+
+	pdev = platform_device_register_data(&ucb->dev, "gpio-keys", -1,
+		&keys, sizeof(keys));
+
+	device_create_file(&ucb->dev, &dev_attr_vbatt);
+	device_create_file(&ucb->dev, &dev_attr_vcharger);
+	device_create_file(&ucb->dev, &dev_attr_batt_temp);
+
+	dev->priv = pdev;
 	return 0;
 }
 
 static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev)
 {
+	struct platform_device *pdev = dev->priv;
+
+	if (!IS_ERR(pdev))
+		platform_device_unregister(pdev);
+
 	device_remove_file(&dev->ucb->dev, &dev_attr_batt_temp);
 	device_remove_file(&dev->ucb->dev, &dev_attr_vcharger);
 	device_remove_file(&dev->ucb->dev, &dev_attr_vbatt);
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index febc90cdef7e..70f02daeb22a 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -23,14 +23,12 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/mfd/ucb1x00.h>
+#include <linux/pm.h>
 #include <linux/gpio.h>
-#include <linux/semaphore.h>
-
-#include <mach/dma.h>
-#include <mach/hardware.h>
 
 static DEFINE_MUTEX(ucb1x00_mutex);
 static LIST_HEAD(ucb1x00_drivers);
@@ -102,7 +100,7 @@ void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear)
  *	ucb1x00_enable must have been called to enable the comms
  *	before using this function.
  *
- *	This function does not take any semaphores or spinlocks.
+ *	This function does not take any mutexes or spinlocks.
  */
 unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
 {
@@ -120,14 +118,22 @@ static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	else
 		ucb->io_out &= ~(1 << offset);
 
+	ucb1x00_enable(ucb);
 	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+	ucb1x00_disable(ucb);
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 }
 
 static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
-	return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
+	unsigned val;
+
+	ucb1x00_enable(ucb);
+	val = ucb1x00_reg_read(ucb, UCB_IO_DATA);
+	ucb1x00_disable(ucb);
+
+	return val & (1 << offset);
 }
 
 static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -137,7 +143,9 @@ static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 
 	spin_lock_irqsave(&ucb->io_lock, flags);
 	ucb->io_dir &= ~(1 << offset);
+	ucb1x00_enable(ucb);
 	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+	ucb1x00_disable(ucb);
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 
 	return 0;
@@ -157,6 +165,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
 	else
 		ucb->io_out &= ~mask;
 
+	ucb1x00_enable(ucb);
 	if (old != ucb->io_out)
 		ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
 
@@ -164,11 +173,19 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
 		ucb->io_dir |= mask;
 		ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
 	}
+	ucb1x00_disable(ucb);
 	spin_unlock_irqrestore(&ucb->io_lock, flags);
 
 	return 0;
 }
 
+static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+
+	return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO;
+}
+
 /*
  * UCB1300 data sheet says we must:
  *  1. enable ADC	=> 5us (including reference startup time)
@@ -186,7 +203,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
  *	Any code wishing to use the ADC converter must call this
  *	function prior to using it.
  *
- *	This function takes the ADC semaphore to prevent two or more
+ *	This function takes the ADC mutex to prevent two or more
  *	concurrent uses, and therefore may sleep.  As a result, it
  *	can only be called from process context, not interrupt
  *	context.
@@ -196,7 +213,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
  */
 void ucb1x00_adc_enable(struct ucb1x00 *ucb)
 {
-	down(&ucb->adc_sem);
+	mutex_lock(&ucb->adc_mutex);
 
 	ucb->adc_cr |= UCB_ADC_ENA;
 
@@ -218,7 +235,7 @@ void ucb1x00_adc_enable(struct ucb1x00 *ucb)
  *	complete (2 frames max without sync).
  *
  *	If called for a synchronised ADC conversion, it may sleep
- *	with the ADC semaphore held.
+ *	with the ADC mutex held.
  */
 unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
 {
@@ -246,7 +263,7 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
  *	ucb1x00_adc_disable - disable the ADC converter
  *	@ucb: UCB1x00 structure describing chip
  *
- *	Disable the ADC converter and release the ADC semaphore.
+ *	Disable the ADC converter and release the ADC mutex.
  */
 void ucb1x00_adc_disable(struct ucb1x00 *ucb)
 {
@@ -254,7 +271,7 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb)
 	ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
 	ucb1x00_disable(ucb);
 
-	up(&ucb->adc_sem);
+	mutex_unlock(&ucb->adc_mutex);
 }
 
 /*
@@ -265,10 +282,9 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb)
  * SIBCLK to talk to the chip.  We leave the clock running until
  * we have finished processing all interrupts from the chip.
  */
-static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
+static void ucb1x00_irq(unsigned int irq, struct irq_desc *desc)
 {
-	struct ucb1x00 *ucb = devid;
-	struct ucb1x00_irq *irq;
+	struct ucb1x00 *ucb = irq_desc_get_handler_data(desc);
 	unsigned int isr, i;
 
 	ucb1x00_enable(ucb);
@@ -276,157 +292,104 @@ static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
 	ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
 	ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
 
-	for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++)
-		if (isr & 1 && irq->fn)
-			irq->fn(i, irq->devid);
+	for (i = 0; i < 16 && isr; i++, isr >>= 1, irq++)
+		if (isr & 1)
+			generic_handle_irq(ucb->irq_base + i);
 	ucb1x00_disable(ucb);
-
-	return IRQ_HANDLED;
 }
 
-/**
- *	ucb1x00_hook_irq - hook a UCB1x00 interrupt
- *	@ucb:   UCB1x00 structure describing chip
- *	@idx:   interrupt index
- *	@fn:    function to call when interrupt is triggered
- *	@devid: device id to pass to interrupt handler
- *
- *	Hook the specified interrupt.  You can only register one handler
- *	for each interrupt source.  The interrupt source is not enabled
- *	by this function; use ucb1x00_enable_irq instead.
- *
- *	Interrupt handlers will be called with other interrupts enabled.
- *
- *	Returns zero on success, or one of the following errors:
- *	 -EINVAL if the interrupt index is invalid
- *	 -EBUSY if the interrupt has already been hooked
- */
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid)
+static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask)
 {
-	struct ucb1x00_irq *irq;
-	int ret = -EINVAL;
-
-	if (idx < 16) {
-		irq = ucb->irq_handler + idx;
-		ret = -EBUSY;
-
-		spin_lock_irq(&ucb->lock);
-		if (irq->fn == NULL) {
-			irq->devid = devid;
-			irq->fn = fn;
-			ret = 0;
-		}
-		spin_unlock_irq(&ucb->lock);
-	}
-	return ret;
+	ucb1x00_enable(ucb);
+	if (ucb->irq_ris_enbl & mask)
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_mask);
+	if (ucb->irq_fal_enbl & mask)
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_mask);
+	ucb1x00_disable(ucb);
 }
 
-/**
- *	ucb1x00_enable_irq - enable an UCB1x00 interrupt source
- *	@ucb: UCB1x00 structure describing chip
- *	@idx: interrupt index
- *	@edges: interrupt edges to enable
- *
- *	Enable the specified interrupt to trigger on %UCB_RISING,
- *	%UCB_FALLING or both edges.  The interrupt should have been
- *	hooked by ucb1x00_hook_irq.
- */
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_noop(struct irq_data *data)
 {
-	unsigned long flags;
+}
 
-	if (idx < 16) {
-		spin_lock_irqsave(&ucb->lock, flags);
+static void ucb1x00_irq_mask(struct irq_data *data)
+{
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-		ucb1x00_enable(ucb);
-		if (edges & UCB_RISING) {
-			ucb->irq_ris_enbl |= 1 << idx;
-			ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
-		}
-		if (edges & UCB_FALLING) {
-			ucb->irq_fal_enbl |= 1 << idx;
-			ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
-		}
-		ucb1x00_disable(ucb);
-		spin_unlock_irqrestore(&ucb->lock, flags);
-	}
+	raw_spin_lock(&ucb->irq_lock);
+	ucb->irq_mask &= ~mask;
+	ucb1x00_irq_update(ucb, mask);
+	raw_spin_unlock(&ucb->irq_lock);
 }
 
-/**
- *	ucb1x00_disable_irq - disable an UCB1x00 interrupt source
- *	@ucb: UCB1x00 structure describing chip
- *	@edges: interrupt edges to disable
- *
- *	Disable the specified interrupt triggering on the specified
- *	(%UCB_RISING, %UCB_FALLING or both) edges.
- */
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_unmask(struct irq_data *data)
 {
-	unsigned long flags;
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-	if (idx < 16) {
-		spin_lock_irqsave(&ucb->lock, flags);
-
-		ucb1x00_enable(ucb);
-		if (edges & UCB_RISING) {
-			ucb->irq_ris_enbl &= ~(1 << idx);
-			ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
-		}
-		if (edges & UCB_FALLING) {
-			ucb->irq_fal_enbl &= ~(1 << idx);
-			ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
-		}
-		ucb1x00_disable(ucb);
-		spin_unlock_irqrestore(&ucb->lock, flags);
-	}
+	raw_spin_lock(&ucb->irq_lock);
+	ucb->irq_mask |= mask;
+	ucb1x00_irq_update(ucb, mask);
+	raw_spin_unlock(&ucb->irq_lock);
 }
 
-/**
- *	ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt
- *	@ucb: UCB1x00 structure describing chip
- *	@idx: interrupt index
- *	@devid: device id.
- *
- *	Disable the interrupt source and remove the handler.  devid must
- *	match the devid passed when hooking the interrupt.
- *
- *	Returns zero on success, or one of the following errors:
- *	 -EINVAL if the interrupt index is invalid
- *	 -ENOENT if devid does not match
- */
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid)
+static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type)
 {
-	struct ucb1x00_irq *irq;
-	int ret;
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-	if (idx >= 16)
-		goto bad;
+	raw_spin_lock(&ucb->irq_lock);
+	if (type & IRQ_TYPE_EDGE_RISING)
+		ucb->irq_ris_enbl |= mask;
+	else
+		ucb->irq_ris_enbl &= ~mask;
 
-	irq = ucb->irq_handler + idx;
-	ret = -ENOENT;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		ucb->irq_fal_enbl |= mask;
+	else
+		ucb->irq_fal_enbl &= ~mask;
+	if (ucb->irq_mask & mask) {
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_mask);
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_mask);
+	}
+	raw_spin_unlock(&ucb->irq_lock);
 
-	spin_lock_irq(&ucb->lock);
-	if (irq->devid == devid) {
-		ucb->irq_ris_enbl &= ~(1 << idx);
-		ucb->irq_fal_enbl &= ~(1 << idx);
+	return 0;
+}
 
-		ucb1x00_enable(ucb);
-		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
-		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
-		ucb1x00_disable(ucb);
+static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+	struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data;
+	unsigned mask = 1 << (data->irq - ucb->irq_base);
 
-		irq->fn = NULL;
-		irq->devid = NULL;
-		ret = 0;
-	}
-	spin_unlock_irq(&ucb->lock);
-	return ret;
+	if (!pdata || !pdata->can_wakeup)
+		return -EINVAL;
 
-bad:
-	printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx);
-	return -EINVAL;
+	raw_spin_lock(&ucb->irq_lock);
+	if (on)
+		ucb->irq_wake |= mask;
+	else
+		ucb->irq_wake &= ~mask;
+	raw_spin_unlock(&ucb->irq_lock);
+
+	return 0;
 }
 
+static struct irq_chip ucb1x00_irqchip = {
+	.name = "ucb1x00",
+	.irq_ack = ucb1x00_irq_noop,
+	.irq_mask = ucb1x00_irq_mask,
+	.irq_unmask = ucb1x00_irq_unmask,
+	.irq_set_type = ucb1x00_irq_set_type,
+	.irq_set_wake = ucb1x00_irq_set_wake,
+};
+
 static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
 {
 	struct ucb1x00_dev *dev;
@@ -440,8 +403,8 @@ static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
 		ret = drv->add(dev);
 
 		if (ret == 0) {
-			list_add(&dev->dev_node, &ucb->devs);
-			list_add(&dev->drv_node, &drv->devs);
+			list_add_tail(&dev->dev_node, &ucb->devs);
+			list_add_tail(&dev->drv_node, &drv->devs);
 		} else {
 			kfree(dev);
 		}
@@ -533,98 +496,126 @@ static struct class ucb1x00_class = {
 
 static int ucb1x00_probe(struct mcp *mcp)
 {
-	struct ucb1x00 *ucb;
+	struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
 	struct ucb1x00_driver *drv;
-	unsigned int id;
+	struct ucb1x00 *ucb;
+	unsigned id, i, irq_base;
 	int ret = -ENODEV;
-	int temp;
+
+	/* Tell the platform to deassert the UCB1x00 reset */
+	if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_PROBE);
 
 	mcp_enable(mcp);
 	id = mcp_reg_read(mcp, UCB_ID);
+	mcp_disable(mcp);
 
 	if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
 		printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
-		goto err_disable;
+		goto out;
 	}
 
 	ucb = kzalloc(sizeof(struct ucb1x00), GFP_KERNEL);
 	ret = -ENOMEM;
 	if (!ucb)
-		goto err_disable;
-
+		goto out;
 
+	device_initialize(&ucb->dev);
 	ucb->dev.class = &ucb1x00_class;
 	ucb->dev.parent = &mcp->attached_device;
 	dev_set_name(&ucb->dev, "ucb1x00");
 
-	spin_lock_init(&ucb->lock);
+	raw_spin_lock_init(&ucb->irq_lock);
 	spin_lock_init(&ucb->io_lock);
-	sema_init(&ucb->adc_sem, 1);
+	mutex_init(&ucb->adc_mutex);
 
 	ucb->id  = id;
 	ucb->mcp = mcp;
+
+	ret = device_add(&ucb->dev);
+	if (ret)
+		goto err_dev_add;
+
+	ucb1x00_enable(ucb);
 	ucb->irq = ucb1x00_detect_irq(ucb);
+	ucb1x00_disable(ucb);
 	if (ucb->irq == NO_IRQ) {
-		printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
+		dev_err(&ucb->dev, "IRQ probe failed\n");
 		ret = -ENODEV;
-		goto err_free;
+		goto err_no_irq;
 	}
 
 	ucb->gpio.base = -1;
-	if (mcp->gpio_base != 0) {
+	irq_base = pdata ? pdata->irq_base : 0;
+	ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1);
+	if (ucb->irq_base < 0) {
+		dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
+			ucb->irq_base);
+		goto err_irq_alloc;
+	}
+
+	for (i = 0; i < 16; i++) {
+		unsigned irq = ucb->irq_base + i;
+
+		irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq);
+		irq_set_chip_data(irq, ucb);
+		set_irq_flags(irq, IRQF_VALID | IRQ_NOREQUEST);
+	}
+
+	irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING);
+	irq_set_handler_data(ucb->irq, ucb);
+	irq_set_chained_handler(ucb->irq, ucb1x00_irq);
+
+	if (pdata && pdata->gpio_base) {
 		ucb->gpio.label = dev_name(&ucb->dev);
-		ucb->gpio.base = mcp->gpio_base;
+		ucb->gpio.dev = &ucb->dev;
+		ucb->gpio.owner = THIS_MODULE;
+		ucb->gpio.base = pdata->gpio_base;
 		ucb->gpio.ngpio = 10;
 		ucb->gpio.set = ucb1x00_gpio_set;
 		ucb->gpio.get = ucb1x00_gpio_get;
 		ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
 		ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+		ucb->gpio.to_irq = ucb1x00_to_irq;
 		ret = gpiochip_add(&ucb->gpio);
 		if (ret)
-			goto err_free;
+			goto err_gpio_add;
 	} else
 		dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
 
-	ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
-			  "UCB1x00", ucb);
-	if (ret) {
-		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
-			ucb->irq, ret);
-		goto err_gpio;
-	}
-
 	mcp_set_drvdata(mcp, ucb);
 
-	ret = device_register(&ucb->dev);
-	if (ret)
-		goto err_irq;
-
+	if (pdata)
+		device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup);
 
 	INIT_LIST_HEAD(&ucb->devs);
 	mutex_lock(&ucb1x00_mutex);
-	list_add(&ucb->node, &ucb1x00_devices);
+	list_add_tail(&ucb->node, &ucb1x00_devices);
 	list_for_each_entry(drv, &ucb1x00_drivers, node) {
 		ucb1x00_add_dev(ucb, drv);
 	}
 	mutex_unlock(&ucb1x00_mutex);
 
-	goto out;
+	return ret;
 
- err_irq:
-	free_irq(ucb->irq, ucb);
- err_gpio:
-	if (ucb->gpio.base != -1)
-		temp = gpiochip_remove(&ucb->gpio);
- err_free:
-	kfree(ucb);
- err_disable:
-	mcp_disable(mcp);
+ err_gpio_add:
+	irq_set_chained_handler(ucb->irq, NULL);
+ err_irq_alloc:
+	if (ucb->irq_base > 0)
+		irq_free_descs(ucb->irq_base, 16);
+ err_no_irq:
+	device_del(&ucb->dev);
+ err_dev_add:
+	put_device(&ucb->dev);
  out:
+	if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_PROBE_FAIL);
 	return ret;
 }
 
 static void ucb1x00_remove(struct mcp *mcp)
 {
+	struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
 	struct list_head *l, *n;
 	int ret;
@@ -643,8 +634,12 @@ static void ucb1x00_remove(struct mcp *mcp)
 			dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
 	}
 
-	free_irq(ucb->irq, ucb);
+	irq_set_chained_handler(ucb->irq, NULL);
+	irq_free_descs(ucb->irq_base, 16);
 	device_unregister(&ucb->dev);
+
+	if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_REMOVE);
 }
 
 int ucb1x00_register_driver(struct ucb1x00_driver *drv)
@@ -653,7 +648,7 @@ int ucb1x00_register_driver(struct ucb1x00_driver *drv)
 
 	INIT_LIST_HEAD(&drv->devs);
 	mutex_lock(&ucb1x00_mutex);
-	list_add(&drv->node, &ucb1x00_drivers);
+	list_add_tail(&drv->node, &ucb1x00_drivers);
 	list_for_each_entry(ucb, &ucb1x00_devices, node) {
 		ucb1x00_add_dev(ucb, drv);
 	}
@@ -674,44 +669,86 @@ void ucb1x00_unregister_driver(struct ucb1x00_driver *drv)
 	mutex_unlock(&ucb1x00_mutex);
 }
 
-static int ucb1x00_suspend(struct mcp *mcp, pm_message_t state)
+static int ucb1x00_suspend(struct device *dev)
 {
-	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
-	struct ucb1x00_dev *dev;
+	struct ucb1x00_plat_data *pdata = dev->platform_data;
+	struct ucb1x00 *ucb = dev_get_drvdata(dev);
+	struct ucb1x00_dev *udev;
 
 	mutex_lock(&ucb1x00_mutex);
-	list_for_each_entry(dev, &ucb->devs, dev_node) {
-		if (dev->drv->suspend)
-			dev->drv->suspend(dev, state);
+	list_for_each_entry(udev, &ucb->devs, dev_node) {
+		if (udev->drv->suspend)
+			udev->drv->suspend(udev);
 	}
 	mutex_unlock(&ucb1x00_mutex);
+
+	if (ucb->irq_wake) {
+		unsigned long flags;
+
+		raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+		ucb1x00_enable(ucb);
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_wake);
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_wake);
+		ucb1x00_disable(ucb);
+		raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+		enable_irq_wake(ucb->irq);
+	} else if (pdata && pdata->reset)
+		pdata->reset(UCB_RST_SUSPEND);
+
 	return 0;
 }
 
-static int ucb1x00_resume(struct mcp *mcp)
+static int ucb1x00_resume(struct device *dev)
 {
-	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
-	struct ucb1x00_dev *dev;
+	struct ucb1x00_plat_data *pdata = dev->platform_data;
+	struct ucb1x00 *ucb = dev_get_drvdata(dev);
+	struct ucb1x00_dev *udev;
+
+	if (!ucb->irq_wake && pdata && pdata->reset)
+		pdata->reset(UCB_RST_RESUME);
 
+	ucb1x00_enable(ucb);
 	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
 	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+	if (ucb->irq_wake) {
+		unsigned long flags;
+
+		raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+				  ucb->irq_mask);
+		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+				  ucb->irq_mask);
+		raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+		disable_irq_wake(ucb->irq);
+	}
+	ucb1x00_disable(ucb);
+
 	mutex_lock(&ucb1x00_mutex);
-	list_for_each_entry(dev, &ucb->devs, dev_node) {
-		if (dev->drv->resume)
-			dev->drv->resume(dev);
+	list_for_each_entry(udev, &ucb->devs, dev_node) {
+		if (udev->drv->resume)
+			udev->drv->resume(udev);
 	}
 	mutex_unlock(&ucb1x00_mutex);
 	return 0;
 }
 
+static const struct dev_pm_ops ucb1x00_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume)
+};
+
 static struct mcp_driver ucb1x00_driver = {
 	.drv		= {
 		.name	= "ucb1x00",
+		.owner	= THIS_MODULE,
+		.pm	= &ucb1x00_pm_ops,
 	},
 	.probe		= ucb1x00_probe,
 	.remove		= ucb1x00_remove,
-	.suspend	= ucb1x00_suspend,
-	.resume		= ucb1x00_resume,
 };
 
 static int __init ucb1x00_init(void)
@@ -742,14 +779,10 @@ EXPORT_SYMBOL(ucb1x00_adc_enable);
 EXPORT_SYMBOL(ucb1x00_adc_read);
 EXPORT_SYMBOL(ucb1x00_adc_disable);
 
-EXPORT_SYMBOL(ucb1x00_hook_irq);
-EXPORT_SYMBOL(ucb1x00_free_irq);
-EXPORT_SYMBOL(ucb1x00_enable_irq);
-EXPORT_SYMBOL(ucb1x00_disable_irq);
-
 EXPORT_SYMBOL(ucb1x00_register_driver);
 EXPORT_SYMBOL(ucb1x00_unregister_driver);
 
+MODULE_ALIAS("mcp:ucb1x00");
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("UCB1x00 core driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 63a3cbdfa3f3..1e0e20c0e082 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -20,8 +20,9 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
-#include <linux/smp.h>
+#include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/spinlock.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/string.h>
@@ -32,7 +33,6 @@
 #include <linux/kthread.h>
 #include <linux/mfd/ucb1x00.h>
 
-#include <mach/dma.h>
 #include <mach/collie.h>
 #include <asm/mach-types.h>
 
@@ -42,6 +42,8 @@ struct ucb1x00_ts {
 	struct input_dev	*idev;
 	struct ucb1x00		*ucb;
 
+	spinlock_t		irq_lock;
+	unsigned		irq_disabled;
 	wait_queue_head_t	irq_wait;
 	struct task_struct	*rtask;
 	u16			x_res;
@@ -238,7 +240,12 @@ static int ucb1x00_thread(void *_ts)
 		if (ucb1x00_ts_pen_down(ts)) {
 			set_current_state(TASK_INTERRUPTIBLE);
 
-			ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
+			spin_lock_irq(&ts->irq_lock);
+			if (ts->irq_disabled) {
+				ts->irq_disabled = 0;
+				enable_irq(ts->ucb->irq_base + UCB_IRQ_TSPX);
+			}
+			spin_unlock_irq(&ts->irq_lock);
 			ucb1x00_disable(ts->ucb);
 
 			/*
@@ -281,23 +288,37 @@ static int ucb1x00_thread(void *_ts)
  * We only detect touch screen _touches_ with this interrupt
  * handler, and even then we just schedule our task.
  */
-static void ucb1x00_ts_irq(int idx, void *id)
+static irqreturn_t ucb1x00_ts_irq(int irq, void *id)
 {
 	struct ucb1x00_ts *ts = id;
 
-	ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
+	spin_lock(&ts->irq_lock);
+	ts->irq_disabled = 1;
+	disable_irq_nosync(ts->ucb->irq_base + UCB_IRQ_TSPX);
+	spin_unlock(&ts->irq_lock);
 	wake_up(&ts->irq_wait);
+
+	return IRQ_HANDLED;
 }
 
 static int ucb1x00_ts_open(struct input_dev *idev)
 {
 	struct ucb1x00_ts *ts = input_get_drvdata(idev);
+	unsigned long flags = 0;
 	int ret = 0;
 
 	BUG_ON(ts->rtask);
 
+	if (machine_is_collie())
+		flags = IRQF_TRIGGER_RISING;
+	else
+		flags = IRQF_TRIGGER_FALLING;
+
+	ts->irq_disabled = 0;
+
 	init_waitqueue_head(&ts->irq_wait);
-	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
+	ret = request_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ucb1x00_ts_irq,
+			  flags, "ucb1x00-ts", ts);
 	if (ret < 0)
 		goto out;
 
@@ -314,7 +335,7 @@ static int ucb1x00_ts_open(struct input_dev *idev)
 	if (!IS_ERR(ts->rtask)) {
 		ret = 0;
 	} else {
-		ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+		free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
 		ts->rtask = NULL;
 		ret = -EFAULT;
 	}
@@ -334,7 +355,7 @@ static void ucb1x00_ts_close(struct input_dev *idev)
 		kthread_stop(ts->rtask);
 
 	ucb1x00_enable(ts->ucb);
-	ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+	free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
 	ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
 	ucb1x00_disable(ts->ucb);
 }
@@ -359,11 +380,13 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
 	ts->ucb = dev->ucb;
 	ts->idev = idev;
 	ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
+	spin_lock_init(&ts->irq_lock);
 
 	idev->name       = "Touchscreen panel";
 	idev->id.product = ts->ucb->id;
 	idev->open       = ucb1x00_ts_open;
 	idev->close      = ucb1x00_ts_close;
+	idev->dev.parent = &ts->ucb->dev;
 
 	idev->evbit[0]   = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
 	idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 502821997707..cbc3b7867910 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -23,106 +23,6 @@
 #include <asm/sizes.h>
 #include <asm/mach/flash.h>
 
-#if 0
-/*
- * This is here for documentation purposes only - until these people
- * submit their machine types.  It will be gone January 2005.
- */
-static struct mtd_partition consus_partitions[] = {
-	{
-		.name		= "Consus boot firmware",
-		.offset		= 0,
-		.size		= 0x00040000,
-		.mask_flags	= MTD_WRITABLE, /* force read-only */
-	}, {
-		.name		= "Consus kernel",
-		.offset		= 0x00040000,
-		.size		= 0x00100000,
-		.mask_flags	= 0,
-	}, {
-		.name		= "Consus disk",
-		.offset		= 0x00140000,
-		/* The rest (up to 16M) for jffs.  We could put 0 and
-		   make it find the size automatically, but right now
-		   i have 32 megs.  jffs will use all 32 megs if given
-		   the chance, and this leads to horrible problems
-		   when you try to re-flash the image because blob
-		   won't erase the whole partition. */
-		.size		= 0x01000000 - 0x00140000,
-		.mask_flags	= 0,
-	}, {
-		/* this disk is a secondary disk, which can be used as
-		   needed, for simplicity, make it the size of the other
-		   consus partition, although realistically it could be
-		   the remainder of the disk (depending on the file
-		   system used) */
-		 .name		= "Consus disk2",
-		 .offset	= 0x01000000,
-		 .size		= 0x01000000 - 0x00140000,
-		 .mask_flags	= 0,
-	}
-};
-
-/* Frodo has 2 x 16M 28F128J3A flash chips in bank 0: */
-static struct mtd_partition frodo_partitions[] =
-{
-	{
-		.name		= "bootloader",
-		.size		= 0x00040000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "bootloader params",
-		.size		= 0x00040000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "kernel",
-		.size		= 0x00100000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "ramdisk",
-		.size		= 0x00400000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "file system",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND
-	}
-};
-
-static struct mtd_partition jornada56x_partitions[] = {
-	{
-		.name		= "bootldr",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "rootfs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static void jornada56x_set_vpp(int vpp)
-{
-	if (vpp)
-		GPSR = GPIO_GPIO26;
-	else
-		GPCR = GPIO_GPIO26;
-	GPDR |= GPIO_GPIO26;
-}
-
-/*
- * Machine        Phys          Size    set_vpp
- * Consus    : SA1100_CS0_PHYS SZ_32M
- * Frodo     : SA1100_CS0_PHYS SZ_32M
- * Jornada56x: SA1100_CS0_PHYS SZ_32M jornada56x_set_vpp
- */
-#endif
-
 struct sa_subdev_info {
 	char name[16];
 	struct map_info map;
@@ -373,21 +273,9 @@ static int __exit sa1100_mtd_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static void sa1100_mtd_shutdown(struct platform_device *dev)
-{
-	struct sa_info *info = platform_get_drvdata(dev);
-	if (info && mtd_suspend(info->mtd) == 0)
-		mtd_resume(info->mtd);
-}
-#else
-#define sa1100_mtd_shutdown NULL
-#endif
-
 static struct platform_driver sa1100_mtd_driver = {
 	.probe		= sa1100_mtd_probe,
 	.remove		= __exit_p(sa1100_mtd_remove),
-	.shutdown	= sa1100_mtd_shutdown,
 	.driver		= {
 		.name	= "sa1100-mtd",
 		.owner	= THIS_MODULE,
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 1dc4fad593e7..fee449355014 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2280,7 +2280,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_release_io;
 #if defined(CONFIG_SA1100_ASSABET)
-	NCR_0 |= NCR_ENET_OSC_EN;
+	neponset_ncr_set(NCR_ENET_OSC_EN);
 #endif
 	platform_set_drvdata(pdev, ndev);
 	ret = smc_enable_device(pdev);
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index e535137eb2d0..468047866c8c 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -356,7 +356,7 @@ config VLSI_FIR
 
 config SA1100_FIR
 	tristate "SA1100 Internal IR"
-	depends on ARCH_SA1100 && IRDA
+	depends on ARCH_SA1100 && IRDA && DMA_SA11X0
 
 config VIA_FIR
 	tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index da2705061a60..a0d1913a58d3 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -15,7 +15,7 @@
  *  This driver takes one kernel command line parameter, sa1100ir=, with
  *  the following options:
  *	max_rate:baudrate	- set the maximum baud rate
- *	power_leve:level	- set the transmitter power level
+ *	power_level:level	- set the transmitter power level
  *	tx_lpm:0|1		- set transmit low power mode
  */
 #include <linux/module.h>
@@ -30,13 +30,13 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/sa11x0-dma.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/wrapper.h>
 #include <net/irda/irda_device.h>
 
-#include <asm/irq.h>
-#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <asm/mach/irda.h>
 
@@ -44,8 +44,15 @@ static int power_level = 3;
 static int tx_lpm;
 static int max_rate = 4000000;
 
+struct sa1100_buf {
+	struct device		*dev;
+	struct sk_buff		*skb;
+	struct scatterlist	sg;
+	struct dma_chan		*chan;
+	dma_cookie_t		cookie;
+};
+
 struct sa1100_irda {
-	unsigned char		hscr0;
 	unsigned char		utcr4;
 	unsigned char		power;
 	unsigned char		open;
@@ -53,12 +60,8 @@ struct sa1100_irda {
 	int			speed;
 	int			newspeed;
 
-	struct sk_buff		*txskb;
-	struct sk_buff		*rxskb;
-	dma_addr_t		txbuf_dma;
-	dma_addr_t		rxbuf_dma;
-	dma_regs_t		*txdma;
-	dma_regs_t		*rxdma;
+	struct sa1100_buf	dma_rx;
+	struct sa1100_buf	dma_tx;
 
 	struct device		*dev;
 	struct irda_platform_data *pdata;
@@ -67,23 +70,103 @@ struct sa1100_irda {
 
 	iobuff_t		tx_buff;
 	iobuff_t		rx_buff;
+
+	int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *);
+	irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *);
 };
 
+static int sa1100_irda_set_speed(struct sa1100_irda *, int);
+
 #define IS_FIR(si)		((si)->speed >= 4000000)
 
 #define HPSIR_MAX_RXLEN		2047
 
+static struct dma_slave_config sa1100_irda_sir_tx = {
+	.direction	= DMA_TO_DEVICE,
+	.dst_addr	= __PREG(Ser2UTDR),
+	.dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE,
+	.dst_maxburst	= 4,
+};
+
+static struct dma_slave_config sa1100_irda_fir_rx = {
+	.direction	= DMA_FROM_DEVICE,
+	.src_addr	= __PREG(Ser2HSDR),
+	.src_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE,
+	.src_maxburst	= 8,
+};
+
+static struct dma_slave_config sa1100_irda_fir_tx = {
+	.direction	= DMA_TO_DEVICE,
+	.dst_addr	= __PREG(Ser2HSDR),
+	.dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE,
+	.dst_maxburst	= 8,
+};
+
+static unsigned sa1100_irda_dma_xferred(struct sa1100_buf *buf)
+{
+	struct dma_chan *chan = buf->chan;
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = chan->device->device_tx_status(chan, buf->cookie, &state);
+	if (status != DMA_PAUSED)
+		return 0;
+
+	return sg_dma_len(&buf->sg) - state.residue;
+}
+
+static int sa1100_irda_dma_request(struct device *dev, struct sa1100_buf *buf,
+	const char *name, struct dma_slave_config *cfg)
+{
+	dma_cap_mask_t m;
+	int ret;
+
+	dma_cap_zero(m);
+	dma_cap_set(DMA_SLAVE, m);
+
+	buf->chan = dma_request_channel(m, sa11x0_dma_filter_fn, (void *)name);
+	if (!buf->chan) {
+		dev_err(dev, "unable to request DMA channel for %s\n",
+			name);
+		return -ENOENT;
+	}
+
+	ret = dmaengine_slave_config(buf->chan, cfg);
+	if (ret)
+		dev_warn(dev, "DMA slave_config for %s returned %d\n",
+			name, ret);
+
+	buf->dev = buf->chan->device->dev;
+
+	return 0;
+}
+
+static void sa1100_irda_dma_start(struct sa1100_buf *buf,
+	enum dma_transfer_direction dir, dma_async_tx_callback cb, void *cb_p)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *chan = buf->chan;
+
+	desc = chan->device->device_prep_slave_sg(chan, &buf->sg, 1, dir,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (desc) {
+		desc->callback = cb;
+		desc->callback_param = cb_p;
+		buf->cookie = dmaengine_submit(desc);
+		dma_async_issue_pending(chan);
+	}
+}
+
 /*
  * Allocate and map the receive buffer, unless it is already allocated.
  */
 static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
 {
-	if (si->rxskb)
+	if (si->dma_rx.skb)
 		return 0;
 
-	si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
-
-	if (!si->rxskb) {
+	si->dma_rx.skb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
+	if (!si->dma_rx.skb) {
 		printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n");
 		return -ENOMEM;
 	}
@@ -92,11 +175,14 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
 	 * Align any IP headers that may be contained
 	 * within the frame.
 	 */
-	skb_reserve(si->rxskb, 1);
+	skb_reserve(si->dma_rx.skb, 1);
+
+	sg_set_buf(&si->dma_rx.sg, si->dma_rx.skb->data, HPSIR_MAX_RXLEN);
+	if (dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE) == 0) {
+		dev_kfree_skb_any(si->dma_rx.skb);
+		return -ENOMEM;
+	}
 
-	si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
-					HPSIR_MAX_RXLEN,
-					DMA_FROM_DEVICE);
 	return 0;
 }
 
@@ -106,7 +192,7 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
  */
 static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
 {
-	if (!si->rxskb) {
+	if (!si->dma_rx.skb) {
 		printk(KERN_ERR "sa1100_ir: rx buffer went missing\n");
 		return;
 	}
@@ -114,254 +200,87 @@ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
 	/*
 	 * First empty receive FIFO
 	 */
-	Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+	Ser2HSCR0 = HSCR0_HSSP;
 
 	/*
 	 * Enable the DMA, receiver and receive interrupt.
 	 */
-	sa1100_clear_dma(si->rxdma);
-	sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN);
-	Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE;
+	dmaengine_terminate_all(si->dma_rx.chan);
+	sa1100_irda_dma_start(&si->dma_rx, DMA_DEV_TO_MEM, NULL, NULL);
+
+	Ser2HSCR0 = HSCR0_HSSP | HSCR0_RXE;
 }
 
-/*
- * Set the IrDA communications speed.
- */
-static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
+static void sa1100_irda_check_speed(struct sa1100_irda *si)
 {
-	unsigned long flags;
-	int brd, ret = -EINVAL;
-
-	switch (speed) {
-	case 9600:	case 19200:	case 38400:
-	case 57600:	case 115200:
-		brd = 3686400 / (16 * speed) - 1;
-
-		/*
-		 * Stop the receive DMA.
-		 */
-		if (IS_FIR(si))
-			sa1100_stop_dma(si->rxdma);
-
-		local_irq_save(flags);
-
-		Ser2UTCR3 = 0;
-		Ser2HSCR0 = HSCR0_UART;
-
-		Ser2UTCR1 = brd >> 8;
-		Ser2UTCR2 = brd;
-
-		/*
-		 * Clear status register
-		 */
-		Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
-		Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
-
-		if (si->pdata->set_speed)
-			si->pdata->set_speed(si->dev, speed);
-
-		si->speed = speed;
-
-		local_irq_restore(flags);
-		ret = 0;
-		break;
-
-	case 4000000:
-		local_irq_save(flags);
-
-		si->hscr0 = 0;
-
-		Ser2HSSR0 = 0xff;
-		Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
-		Ser2UTCR3 = 0;
-
-		si->speed = speed;
-
-		if (si->pdata->set_speed)
-			si->pdata->set_speed(si->dev, speed);
-
-		sa1100_irda_rx_alloc(si);
-		sa1100_irda_rx_dma_start(si);
-
-		local_irq_restore(flags);
-
-		break;
-
-	default:
-		break;
+	if (si->newspeed) {
+		sa1100_irda_set_speed(si, si->newspeed);
+		si->newspeed = 0;
 	}
-
-	return ret;
 }
 
 /*
- * Control the power state of the IrDA transmitter.
- * State:
- *  0 - off
- *  1 - short range, lowest power
- *  2 - medium range, medium power
- *  3 - maximum range, high power
- *
- * Currently, only assabet is known to support this.
+ * HP-SIR format support.
  */
-static int
-__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+static void sa1100_irda_sirtxdma_irq(void *id)
 {
-	int ret = 0;
-	if (si->pdata->set_power)
-		ret = si->pdata->set_power(si->dev, state);
-	return ret;
-}
-
-static inline int
-sa1100_set_power(struct sa1100_irda *si, unsigned int state)
-{
-	int ret;
-
-	ret = __sa1100_irda_set_power(si, state);
-	if (ret == 0)
-		si->power = state;
+	struct net_device *dev = id;
+	struct sa1100_irda *si = netdev_priv(dev);
 
-	return ret;
-}
+	dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE);
+	dev_kfree_skb(si->dma_tx.skb);
+	si->dma_tx.skb = NULL;
 
-static int sa1100_irda_startup(struct sa1100_irda *si)
-{
-	int ret;
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += sg_dma_len(&si->dma_tx.sg);
 
-	/*
-	 * Ensure that the ports for this device are setup correctly.
-	 */
-	if (si->pdata->startup)	{
-		ret = si->pdata->startup(si->dev);
-		if (ret)
-			return ret;
-	}
-
-	/*
-	 * Configure PPC for IRDA - we want to drive TXD2 low.
-	 * We also want to drive this pin low during sleep.
-	 */
-	PPSR &= ~PPC_TXD2;
-	PSDR &= ~PPC_TXD2;
-	PPDR |= PPC_TXD2;
-
-	/*
-	 * Enable HP-SIR modulation, and ensure that the port is disabled.
-	 */
-	Ser2UTCR3 = 0;
-	Ser2HSCR0 = HSCR0_UART;
-	Ser2UTCR4 = si->utcr4;
-	Ser2UTCR0 = UTCR0_8BitData;
-	Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+	/* We need to ensure that the transmitter has finished. */
+	do
+		rmb();
+	while (Ser2UTSR1 & UTSR1_TBY);
 
 	/*
-	 * Clear status register
+	 * Ok, we've finished transmitting.  Now enable the receiver.
+	 * Sometimes we get a receive IRQ immediately after a transmit...
 	 */
 	Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+	Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
 
-	ret = sa1100_irda_set_speed(si, si->speed = 9600);
-	if (ret) {
-		Ser2UTCR3 = 0;
-		Ser2HSCR0 = 0;
-
-		if (si->pdata->shutdown)
-			si->pdata->shutdown(si->dev);
-	}
-
-	return ret;
-}
-
-static void sa1100_irda_shutdown(struct sa1100_irda *si)
-{
-	/*
-	 * Stop all DMA activity.
-	 */
-	sa1100_stop_dma(si->rxdma);
-	sa1100_stop_dma(si->txdma);
-
-	/* Disable the port. */
-	Ser2UTCR3 = 0;
-	Ser2HSCR0 = 0;
+	sa1100_irda_check_speed(si);
 
-	if (si->pdata->shutdown)
-		si->pdata->shutdown(si->dev);
+	/* I'm hungry! */
+	netif_wake_queue(dev);
 }
 
-#ifdef CONFIG_PM
-/*
- * Suspend the IrDA interface.
- */
-static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
+static int sa1100_irda_sir_tx_start(struct sk_buff *skb, struct net_device *dev,
+	struct sa1100_irda *si)
 {
-	struct net_device *dev = platform_get_drvdata(pdev);
-	struct sa1100_irda *si;
-
-	if (!dev)
-		return 0;
-
-	si = netdev_priv(dev);
-	if (si->open) {
-		/*
-		 * Stop the transmit queue
-		 */
-		netif_device_detach(dev);
-		disable_irq(dev->irq);
-		sa1100_irda_shutdown(si);
-		__sa1100_irda_set_power(si, 0);
+	si->tx_buff.data = si->tx_buff.head;
+	si->tx_buff.len  = async_wrap_skb(skb, si->tx_buff.data,
+					  si->tx_buff.truesize);
+
+	si->dma_tx.skb = skb;
+	sg_set_buf(&si->dma_tx.sg, si->tx_buff.data, si->tx_buff.len);
+	if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+		si->dma_tx.skb = NULL;
+		netif_wake_queue(dev);
+		dev->stats.tx_dropped++;
+		return NETDEV_TX_OK;
 	}
 
-	return 0;
-}
-
-/*
- * Resume the IrDA interface.
- */
-static int sa1100_irda_resume(struct platform_device *pdev)
-{
-	struct net_device *dev = platform_get_drvdata(pdev);
-	struct sa1100_irda *si;
-
-	if (!dev)
-		return 0;
+	sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_sirtxdma_irq, dev);
 
-	si = netdev_priv(dev);
-	if (si->open) {
-		/*
-		 * If we missed a speed change, initialise at the new speed
-		 * directly.  It is debatable whether this is actually
-		 * required, but in the interests of continuing from where
-		 * we left off it is desirable.  The converse argument is
-		 * that we should re-negotiate at 9600 baud again.
-		 */
-		if (si->newspeed) {
-			si->speed = si->newspeed;
-			si->newspeed = 0;
-		}
-
-		sa1100_irda_startup(si);
-		__sa1100_irda_set_power(si, si->power);
-		enable_irq(dev->irq);
-
-		/*
-		 * This automatically wakes up the queue
-		 */
-		netif_device_attach(dev);
-	}
+	/*
+	 * The mean turn-around time is enforced by XBOF padding,
+	 * so we don't have to do anything special here.
+	 */
+	Ser2UTCR3 = UTCR3_TXE;
 
-	return 0;
+	return NETDEV_TX_OK;
 }
-#else
-#define sa1100_irda_suspend	NULL
-#define sa1100_irda_resume	NULL
-#endif
 
-/*
- * HP-SIR format interrupt service routines.
- */
-static void sa1100_irda_hpsir_irq(struct net_device *dev)
+static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si)
 {
-	struct sa1100_irda *si = netdev_priv(dev);
 	int status;
 
 	status = Ser2UTSR0;
@@ -414,51 +333,96 @@ static void sa1100_irda_hpsir_irq(struct net_device *dev)
 
 	}
 
-	if (status & UTSR0_TFS && si->tx_buff.len) {
-		/*
-		 * Transmitter FIFO is not full
-		 */
-		do {
-			Ser2UTDR = *si->tx_buff.data++;
-			si->tx_buff.len -= 1;
-		} while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len);
+	return IRQ_HANDLED;
+}
 
-		if (si->tx_buff.len == 0) {
-			dev->stats.tx_packets++;
-			dev->stats.tx_bytes += si->tx_buff.data -
-					      si->tx_buff.head;
+/*
+ * FIR format support.
+ */
+static void sa1100_irda_firtxdma_irq(void *id)
+{
+	struct net_device *dev = id;
+	struct sa1100_irda *si = netdev_priv(dev);
+	struct sk_buff *skb;
 
-			/*
-			 * We need to ensure that the transmitter has
-			 * finished.
-			 */
-			do
-				rmb();
-			while (Ser2UTSR1 & UTSR1_TBY);
+	/*
+	 * Wait for the transmission to complete.  Unfortunately,
+	 * the hardware doesn't give us an interrupt to indicate
+	 * "end of frame".
+	 */
+	do
+		rmb();
+	while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
 
-			/*
-			 * Ok, we've finished transmitting.  Now enable
-			 * the receiver.  Sometimes we get a receive IRQ
-			 * immediately after a transmit...
-			 */
-			Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
-			Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+	/*
+	 * Clear the transmit underrun bit.
+	 */
+	Ser2HSSR0 = HSSR0_TUR;
 
-			if (si->newspeed) {
-				sa1100_irda_set_speed(si, si->newspeed);
-				si->newspeed = 0;
-			}
+	/*
+	 * Do we need to change speed?  Note that we're lazy
+	 * here - we don't free the old dma_rx.skb.  We don't need
+	 * to allocate a buffer either.
+	 */
+	sa1100_irda_check_speed(si);
 
-			/* I'm hungry! */
-			netif_wake_queue(dev);
-		}
+	/*
+	 * Start reception.  This disables the transmitter for
+	 * us.  This will be using the existing RX buffer.
+	 */
+	sa1100_irda_rx_dma_start(si);
+
+	/* Account and free the packet. */
+	skb = si->dma_tx.skb;
+	if (skb) {
+		dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+			     DMA_TO_DEVICE);
+		dev->stats.tx_packets ++;
+		dev->stats.tx_bytes += skb->len;
+		dev_kfree_skb_irq(skb);
+		si->dma_tx.skb = NULL;
 	}
+
+	/*
+	 * Make sure that the TX queue is available for sending
+	 * (for retries).  TX has priority over RX at all times.
+	 */
+	netif_wake_queue(dev);
+}
+
+static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev,
+	struct sa1100_irda *si)
+{
+	int mtt = irda_get_mtt(skb);
+
+	si->dma_tx.skb = skb;
+	sg_set_buf(&si->dma_tx.sg, skb->data, skb->len);
+	if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+		si->dma_tx.skb = NULL;
+		netif_wake_queue(dev);
+		dev->stats.tx_dropped++;
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_firtxdma_irq, dev);
+
+	/*
+	 * If we have a mean turn-around time, impose the specified
+	 * specified delay.  We could shorten this by timing from
+	 * the point we received the packet.
+	 */
+	if (mtt)
+		udelay(mtt);
+
+	Ser2HSCR0 = HSCR0_HSSP | HSCR0_TXE;
+
+	return NETDEV_TX_OK;
 }
 
 static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
 {
-	struct sk_buff *skb = si->rxskb;
-	dma_addr_t dma_addr;
+	struct sk_buff *skb = si->dma_rx.skb;
 	unsigned int len, stat, data;
 
 	if (!skb) {
@@ -469,11 +433,10 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
 	/*
 	 * Get the current data position.
 	 */
-	dma_addr = sa1100_get_dma_pos(si->rxdma);
-	len = dma_addr - si->rxbuf_dma;
+	len = sa1100_irda_dma_xferred(&si->dma_rx);
 	if (len > HPSIR_MAX_RXLEN)
 		len = HPSIR_MAX_RXLEN;
-	dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE);
+	dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
 
 	do {
 		/*
@@ -501,7 +464,7 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
 	} while (Ser2HSSR0 & HSSR0_EIF);
 
 	if (stat & HSSR1_EOF) {
-		si->rxskb = NULL;
+		si->dma_rx.skb = NULL;
 
 		skb_put(skb, len);
 		skb->dev = dev;
@@ -518,28 +481,23 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
 		netif_rx(skb);
 	} else {
 		/*
-		 * Remap the buffer.
+		 * Remap the buffer - it was previously mapped, and we
+		 * hope that this succeeds.
 		 */
-		si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
-						HPSIR_MAX_RXLEN,
-						DMA_FROM_DEVICE);
+		dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
 	}
 }
 
 /*
- * FIR format interrupt service routine.  We only have to
- * handle RX events; transmit events go via the TX DMA handler.
- *
- * No matter what, we disable RX, process, and the restart RX.
+ * We only have to handle RX events here; transmit events go via the TX
+ * DMA handler. We disable RX, process, and the restart RX.
  */
-static void sa1100_irda_fir_irq(struct net_device *dev)
+static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si)
 {
-	struct sa1100_irda *si = netdev_priv(dev);
-
 	/*
 	 * Stop RX DMA
 	 */
-	sa1100_stop_dma(si->rxdma);
+	dmaengine_pause(si->dma_rx.chan);
 
 	/*
 	 * Framing error - we throw away the packet completely.
@@ -555,7 +513,7 @@ static void sa1100_irda_fir_irq(struct net_device *dev)
 		/*
 		 * Clear out the DMA...
 		 */
-		Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
+		Ser2HSCR0 = HSCR0_HSSP;
 
 		/*
 		 * Clear selected status bits now, so we
@@ -577,74 +535,124 @@ static void sa1100_irda_fir_irq(struct net_device *dev)
 	 * No matter what happens, we must restart reception.
 	 */
 	sa1100_irda_rx_dma_start(si);
-}
 
-static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	if (IS_FIR(((struct sa1100_irda *)netdev_priv(dev))))
-		sa1100_irda_fir_irq(dev);
-	else
-		sa1100_irda_hpsir_irq(dev);
 	return IRQ_HANDLED;
 }
 
 /*
- * TX DMA completion handler.
+ * Set the IrDA communications speed.
  */
-static void sa1100_irda_txdma_irq(void *id)
+static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
 {
-	struct net_device *dev = id;
-	struct sa1100_irda *si = netdev_priv(dev);
-	struct sk_buff *skb = si->txskb;
+	unsigned long flags;
+	int brd, ret = -EINVAL;
 
-	si->txskb = NULL;
+	switch (speed) {
+	case 9600:	case 19200:	case 38400:
+	case 57600:	case 115200:
+		brd = 3686400 / (16 * speed) - 1;
 
-	/*
-	 * Wait for the transmission to complete.  Unfortunately,
-	 * the hardware doesn't give us an interrupt to indicate
-	 * "end of frame".
-	 */
-	do
-		rmb();
-	while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
+		/* Stop the receive DMA, and configure transmit. */
+		if (IS_FIR(si)) {
+			dmaengine_terminate_all(si->dma_rx.chan);
+			dmaengine_slave_config(si->dma_tx.chan,
+						&sa1100_irda_sir_tx);
+		}
 
-	/*
-	 * Clear the transmit underrun bit.
-	 */
-	Ser2HSSR0 = HSSR0_TUR;
+		local_irq_save(flags);
 
-	/*
-	 * Do we need to change speed?  Note that we're lazy
-	 * here - we don't free the old rxskb.  We don't need
-	 * to allocate a buffer either.
-	 */
-	if (si->newspeed) {
-		sa1100_irda_set_speed(si, si->newspeed);
-		si->newspeed = 0;
-	}
+		Ser2UTCR3 = 0;
+		Ser2HSCR0 = HSCR0_UART;
 
-	/*
-	 * Start reception.  This disables the transmitter for
-	 * us.  This will be using the existing RX buffer.
-	 */
-	sa1100_irda_rx_dma_start(si);
+		Ser2UTCR1 = brd >> 8;
+		Ser2UTCR2 = brd;
 
-	/*
-	 * Account and free the packet.
-	 */
-	if (skb) {
-		dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE);
-		dev->stats.tx_packets ++;
-		dev->stats.tx_bytes += skb->len;
-		dev_kfree_skb_irq(skb);
+		/*
+		 * Clear status register
+		 */
+		Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+		Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+		if (si->pdata->set_speed)
+			si->pdata->set_speed(si->dev, speed);
+
+		si->speed = speed;
+		si->tx_start = sa1100_irda_sir_tx_start;
+		si->irq = sa1100_irda_sir_irq;
+
+		local_irq_restore(flags);
+		ret = 0;
+		break;
+
+	case 4000000:
+		if (!IS_FIR(si))
+			dmaengine_slave_config(si->dma_tx.chan,
+						&sa1100_irda_fir_tx);
+
+		local_irq_save(flags);
+
+		Ser2HSSR0 = 0xff;
+		Ser2HSCR0 = HSCR0_HSSP;
+		Ser2UTCR3 = 0;
+
+		si->speed = speed;
+		si->tx_start = sa1100_irda_fir_tx_start;
+		si->irq = sa1100_irda_fir_irq;
+
+		if (si->pdata->set_speed)
+			si->pdata->set_speed(si->dev, speed);
+
+		sa1100_irda_rx_alloc(si);
+		sa1100_irda_rx_dma_start(si);
+
+		local_irq_restore(flags);
+
+		break;
+
+	default:
+		break;
 	}
 
-	/*
-	 * Make sure that the TX queue is available for sending
-	 * (for retries).  TX has priority over RX at all times.
-	 */
-	netif_wake_queue(dev);
+	return ret;
+}
+
+/*
+ * Control the power state of the IrDA transmitter.
+ * State:
+ *  0 - off
+ *  1 - short range, lowest power
+ *  2 - medium range, medium power
+ *  3 - maximum range, high power
+ *
+ * Currently, only assabet is known to support this.
+ */
+static int
+__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+{
+	int ret = 0;
+	if (si->pdata->set_power)
+		ret = si->pdata->set_power(si->dev, state);
+	return ret;
+}
+
+static inline int
+sa1100_set_power(struct sa1100_irda *si, unsigned int state)
+{
+	int ret;
+
+	ret = __sa1100_irda_set_power(si, state);
+	if (ret == 0)
+		si->power = state;
+
+	return ret;
+}
+
+static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct sa1100_irda *si = netdev_priv(dev);
+
+	return si->irq(dev, si);
 }
 
 static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -660,62 +668,19 @@ static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (speed != si->speed && speed != -1)
 		si->newspeed = speed;
 
-	/*
-	 * If this is an empty frame, we can bypass a lot.
-	 */
+	/* If this is an empty frame, we can bypass a lot. */
 	if (skb->len == 0) {
-		if (si->newspeed) {
-			si->newspeed = 0;
-			sa1100_irda_set_speed(si, speed);
-		}
+		sa1100_irda_check_speed(si);
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
 
-	if (!IS_FIR(si)) {
-		netif_stop_queue(dev);
-
-		si->tx_buff.data = si->tx_buff.head;
-		si->tx_buff.len  = async_wrap_skb(skb, si->tx_buff.data,
-						  si->tx_buff.truesize);
-
-		/*
-		 * Set the transmit interrupt enable.  This will fire
-		 * off an interrupt immediately.  Note that we disable
-		 * the receiver so we won't get spurious characteres
-		 * received.
-		 */
-		Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE;
-
-		dev_kfree_skb(skb);
-	} else {
-		int mtt = irda_get_mtt(skb);
-
-		/*
-		 * We must not be transmitting...
-		 */
-		BUG_ON(si->txskb);
-
-		netif_stop_queue(dev);
-
-		si->txskb = skb;
-		si->txbuf_dma = dma_map_single(si->dev, skb->data,
-					 skb->len, DMA_TO_DEVICE);
-
-		sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len);
-
-		/*
-		 * If we have a mean turn-around time, impose the specified
-		 * specified delay.  We could shorten this by timing from
-		 * the point we received the packet.
-		 */
-		if (mtt)
-			udelay(mtt);
+	netif_stop_queue(dev);
 
-		Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE;
-	}
+	/* We must not already have a skb to transmit... */
+	BUG_ON(si->dma_tx.skb);
 
-	return NETDEV_TX_OK;
+	return si->tx_start(skb, dev, si);
 }
 
 static int
@@ -762,6 +727,69 @@ sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
 	return ret;
 }
 
+static int sa1100_irda_startup(struct sa1100_irda *si)
+{
+	int ret;
+
+	/*
+	 * Ensure that the ports for this device are setup correctly.
+	 */
+	if (si->pdata->startup)	{
+		ret = si->pdata->startup(si->dev);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Configure PPC for IRDA - we want to drive TXD2 low.
+	 * We also want to drive this pin low during sleep.
+	 */
+	PPSR &= ~PPC_TXD2;
+	PSDR &= ~PPC_TXD2;
+	PPDR |= PPC_TXD2;
+
+	/*
+	 * Enable HP-SIR modulation, and ensure that the port is disabled.
+	 */
+	Ser2UTCR3 = 0;
+	Ser2HSCR0 = HSCR0_UART;
+	Ser2UTCR4 = si->utcr4;
+	Ser2UTCR0 = UTCR0_8BitData;
+	Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+
+	/*
+	 * Clear status register
+	 */
+	Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+
+	ret = sa1100_irda_set_speed(si, si->speed = 9600);
+	if (ret) {
+		Ser2UTCR3 = 0;
+		Ser2HSCR0 = 0;
+
+		if (si->pdata->shutdown)
+			si->pdata->shutdown(si->dev);
+	}
+
+	return ret;
+}
+
+static void sa1100_irda_shutdown(struct sa1100_irda *si)
+{
+	/*
+	 * Stop all DMA activity.
+	 */
+	dmaengine_terminate_all(si->dma_rx.chan);
+	dmaengine_terminate_all(si->dma_tx.chan);
+
+	/* Disable the port. */
+	Ser2UTCR3 = 0;
+	Ser2HSCR0 = 0;
+
+	if (si->pdata->shutdown)
+		si->pdata->shutdown(si->dev);
+}
+
 static int sa1100_irda_start(struct net_device *dev)
 {
 	struct sa1100_irda *si = netdev_priv(dev);
@@ -769,26 +797,17 @@ static int sa1100_irda_start(struct net_device *dev)
 
 	si->speed = 9600;
 
-	err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
-	if (err)
-		goto err_irq;
-
-	err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive",
-				 NULL, NULL, &si->rxdma);
+	err = sa1100_irda_dma_request(si->dev, &si->dma_rx, "Ser2ICPRc",
+				&sa1100_irda_fir_rx);
 	if (err)
 		goto err_rx_dma;
 
-	err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit",
-				 sa1100_irda_txdma_irq, dev, &si->txdma);
+	err = sa1100_irda_dma_request(si->dev, &si->dma_tx, "Ser2ICPTr",
+				&sa1100_irda_sir_tx);
 	if (err)
 		goto err_tx_dma;
 
 	/*
-	 * The interrupt must remain disabled for now.
-	 */
-	disable_irq(dev->irq);
-
-	/*
 	 * Setup the serial port for the specified speed.
 	 */
 	err = sa1100_irda_startup(si);
@@ -803,44 +822,60 @@ static int sa1100_irda_start(struct net_device *dev)
 	if (!si->irlap)
 		goto err_irlap;
 
+	err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
+	if (err)
+		goto err_irq;
+
 	/*
 	 * Now enable the interrupt and start the queue
 	 */
 	si->open = 1;
 	sa1100_set_power(si, power_level); /* low power mode */
-	enable_irq(dev->irq);
+
 	netif_start_queue(dev);
 	return 0;
 
+err_irq:
+	irlap_close(si->irlap);
 err_irlap:
 	si->open = 0;
 	sa1100_irda_shutdown(si);
 err_startup:
-	sa1100_free_dma(si->txdma);
+	dma_release_channel(si->dma_tx.chan);
 err_tx_dma:
-	sa1100_free_dma(si->rxdma);
+	dma_release_channel(si->dma_rx.chan);
 err_rx_dma:
-	free_irq(dev->irq, dev);
-err_irq:
 	return err;
 }
 
 static int sa1100_irda_stop(struct net_device *dev)
 {
 	struct sa1100_irda *si = netdev_priv(dev);
+	struct sk_buff *skb;
+
+	netif_stop_queue(dev);
 
-	disable_irq(dev->irq);
+	si->open = 0;
 	sa1100_irda_shutdown(si);
 
 	/*
-	 * If we have been doing DMA receive, make sure we
+	 * If we have been doing any DMA activity, make sure we
 	 * tidy that up cleanly.
 	 */
-	if (si->rxskb) {
-		dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN,
-				 DMA_FROM_DEVICE);
-		dev_kfree_skb(si->rxskb);
-		si->rxskb = NULL;
+	skb = si->dma_rx.skb;
+	if (skb) {
+		dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1,
+			     DMA_FROM_DEVICE);
+		dev_kfree_skb(skb);
+		si->dma_rx.skb = NULL;
+	}
+
+	skb = si->dma_tx.skb;
+	if (skb) {
+		dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+			     DMA_TO_DEVICE);
+		dev_kfree_skb(skb);
+		si->dma_tx.skb = NULL;
 	}
 
 	/* Stop IrLAP */
@@ -849,14 +884,11 @@ static int sa1100_irda_stop(struct net_device *dev)
 		si->irlap = NULL;
 	}
 
-	netif_stop_queue(dev);
-	si->open = 0;
-
 	/*
 	 * Free resources
 	 */
-	sa1100_free_dma(si->txdma);
-	sa1100_free_dma(si->rxdma);
+	dma_release_channel(si->dma_tx.chan);
+	dma_release_channel(si->dma_rx.chan);
 	free_irq(dev->irq, dev);
 
 	sa1100_set_power(si, 0);
@@ -888,11 +920,15 @@ static int sa1100_irda_probe(struct platform_device *pdev)
 	struct net_device *dev;
 	struct sa1100_irda *si;
 	unsigned int baudrate_mask;
-	int err;
+	int err, irq;
 
 	if (!pdev->dev.platform_data)
 		return -EINVAL;
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return irq < 0 ? irq : -ENXIO;
+
 	err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY;
 	if (err)
 		goto err_mem_1;
@@ -907,22 +943,27 @@ static int sa1100_irda_probe(struct platform_device *pdev)
 	if (!dev)
 		goto err_mem_4;
 
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
 	si = netdev_priv(dev);
 	si->dev = &pdev->dev;
 	si->pdata = pdev->dev.platform_data;
 
+	sg_init_table(&si->dma_rx.sg, 1);
+	sg_init_table(&si->dma_tx.sg, 1);
+
 	/*
 	 * Initialise the HP-SIR buffers
 	 */
 	err = sa1100_irda_init_iobuf(&si->rx_buff, 14384);
 	if (err)
 		goto err_mem_5;
-	err = sa1100_irda_init_iobuf(&si->tx_buff, 4000);
+	err = sa1100_irda_init_iobuf(&si->tx_buff, IRDA_SIR_MAX_FRAME);
 	if (err)
 		goto err_mem_5;
 
 	dev->netdev_ops	= &sa1100_irda_netdev_ops;
-	dev->irq	= IRQ_Ser2ICP;
+	dev->irq	= irq;
 
 	irda_init_max_qos_capabilies(&si->qos);
 
@@ -996,6 +1037,74 @@ static int sa1100_irda_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+/*
+ * Suspend the IrDA interface.
+ */
+static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sa1100_irda *si;
+
+	if (!dev)
+		return 0;
+
+	si = netdev_priv(dev);
+	if (si->open) {
+		/*
+		 * Stop the transmit queue
+		 */
+		netif_device_detach(dev);
+		disable_irq(dev->irq);
+		sa1100_irda_shutdown(si);
+		__sa1100_irda_set_power(si, 0);
+	}
+
+	return 0;
+}
+
+/*
+ * Resume the IrDA interface.
+ */
+static int sa1100_irda_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sa1100_irda *si;
+
+	if (!dev)
+		return 0;
+
+	si = netdev_priv(dev);
+	if (si->open) {
+		/*
+		 * If we missed a speed change, initialise at the new speed
+		 * directly.  It is debatable whether this is actually
+		 * required, but in the interests of continuing from where
+		 * we left off it is desirable.  The converse argument is
+		 * that we should re-negotiate at 9600 baud again.
+		 */
+		if (si->newspeed) {
+			si->speed = si->newspeed;
+			si->newspeed = 0;
+		}
+
+		sa1100_irda_startup(si);
+		__sa1100_irda_set_power(si, si->power);
+		enable_irq(dev->irq);
+
+		/*
+		 * This automatically wakes up the queue
+		 */
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+#else
+#define sa1100_irda_suspend	NULL
+#define sa1100_irda_resume	NULL
+#endif
+
 static struct platform_driver sa1100ir_driver = {
 	.probe		= sa1100_irda_probe,
 	.remove		= sa1100_irda_remove,
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index ef5848f65241..70f728ce1856 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -22,6 +22,40 @@
 
 #include "sa1111_generic.h"
 
+/*
+ * These are offsets from the above base.
+ */
+#define PCCR	0x0000
+#define PCSSR	0x0004
+#define PCSR	0x0008
+
+#define PCSR_S0_READY	(1<<0)
+#define PCSR_S1_READY	(1<<1)
+#define PCSR_S0_DETECT	(1<<2)
+#define PCSR_S1_DETECT	(1<<3)
+#define PCSR_S0_VS1	(1<<4)
+#define PCSR_S0_VS2	(1<<5)
+#define PCSR_S1_VS1	(1<<6)
+#define PCSR_S1_VS2	(1<<7)
+#define PCSR_S0_WP	(1<<8)
+#define PCSR_S1_WP	(1<<9)
+#define PCSR_S0_BVD1	(1<<10)
+#define PCSR_S0_BVD2	(1<<11)
+#define PCSR_S1_BVD1	(1<<12)
+#define PCSR_S1_BVD2	(1<<13)
+
+#define PCCR_S0_RST	(1<<0)
+#define PCCR_S1_RST	(1<<1)
+#define PCCR_S0_FLT	(1<<2)
+#define PCCR_S1_FLT	(1<<3)
+#define PCCR_S0_PWAITEN	(1<<4)
+#define PCCR_S1_PWAITEN	(1<<5)
+#define PCCR_S0_PSE	(1<<6)
+#define PCCR_S1_PSE	(1<<7)
+
+#define PCSSR_S0_SLEEP	(1<<0)
+#define PCSSR_S1_SLEEP	(1<<1)
+
 #define IDX_IRQ_S0_READY_NINT	(0)
 #define IDX_IRQ_S0_CD_VALID	(1)
 #define IDX_IRQ_S0_BVD1_STSCHG	(2)
@@ -32,7 +66,7 @@
 void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
 {
 	struct sa1111_pcmcia_socket *s = to_skt(skt);
-	unsigned long status = sa1111_readl(s->dev->mapbase + SA1111_PCSR);
+	unsigned long status = sa1111_readl(s->dev->mapbase + PCSR);
 
 	switch (skt->nr) {
 	case 0:
@@ -88,10 +122,10 @@ int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
 		pccr_set_mask |= PCCR_S0_FLT|PCCR_S1_FLT;
 
 	local_irq_save(flags);
-	val = sa1111_readl(s->dev->mapbase + SA1111_PCCR);
+	val = sa1111_readl(s->dev->mapbase + PCCR);
 	val &= ~pccr_skt_mask;
 	val |= pccr_set_mask & pccr_skt_mask;
-	sa1111_writel(val, s->dev->mapbase + SA1111_PCCR);
+	sa1111_writel(val, s->dev->mapbase + PCCR);
 	local_irq_restore(flags);
 
 	return 0;
@@ -141,20 +175,26 @@ int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
 static int pcmcia_probe(struct sa1111_dev *dev)
 {
 	void __iomem *base;
+	int ret;
+
+	ret = sa1111_enable_device(dev);
+	if (ret)
+		return ret;
 
 	dev_set_drvdata(&dev->dev, NULL);
 
-	if (!request_mem_region(dev->res.start, 512,
-				SA1111_DRIVER_NAME(dev)))
+	if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) {
+		sa1111_disable_device(dev);
 		return -EBUSY;
+	}
 
 	base = dev->mapbase;
 
 	/*
 	 * Initialise the suspend state.
 	 */
-	sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + SA1111_PCSSR);
-	sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + SA1111_PCCR);
+	sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR);
+	sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR);
 
 #ifdef CONFIG_SA1100_BADGE4
 	pcmcia_badge4_init(&dev->dev);
@@ -184,6 +224,7 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev)
 	}
 
 	release_mem_region(dev->res.start, 512);
+	sa1111_disable_device(dev);
 	return 0;
 }
 
diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c
index 50f297d850e7..1d78739c4c07 100644
--- a/drivers/pcmcia/sa1111_neponset.c
+++ b/drivers/pcmcia/sa1111_neponset.c
@@ -94,12 +94,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
 
 	ret = sa1111_pcmcia_configure_socket(skt, state);
 	if (ret == 0) {
-		unsigned long flags;
-
-		local_irq_save(flags);
-		NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set;
-
-		local_irq_restore(flags);
+		neponset_ncr_frob(ncr_mask, ncr_set);
 		sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
 	}
 
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index fa512ed42017..4940fa8c4e10 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -35,7 +35,7 @@
 #include <linux/bitops.h>
 
 #include <mach/hardware.h>
-#include <asm/irq.h>
+#include <mach/irqs.h>
 
 #if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
 #include <mach/regs-rtc.h>
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index a750aa72b8ef..2a28b4ad1975 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -305,7 +305,7 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 	info->base = base;
 
 	info->info.scsi.io_base		= base + 0x2000;
-	info->info.scsi.irq		= NO_IRQ;
+	info->info.scsi.irq		= 0;
 	info->info.scsi.dma		= NO_DMA;
 	info->info.scsi.io_shift	= 5;
 	info->info.ifcfg.clockrate	= 24; /* MHz */
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index e85c40b6e19b..6206a666a8ec 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2176,7 +2176,7 @@ static void fas216_done(FAS216_Info *info, unsigned int result)
 	fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
 	fn(info, SCpnt, result);
 
-	if (info->scsi.irq != NO_IRQ) {
+	if (info->scsi.irq) {
 		spin_lock_irqsave(&info->host_lock, flags);
 		if (info->scsi.phase == PHASE_IDLE)
 			fas216_kick(info);
@@ -2276,7 +2276,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
 	 * We should only be using this if we don't have an interrupt.
 	 * Provide some "incentive" to use the queueing code.
 	 */
-	BUG_ON(info->scsi.irq != NO_IRQ);
+	BUG_ON(info->scsi.irq);
 
 	info->internal_done = 0;
 	fas216_queue_command_lck(SCpnt, fas216_internal_done);
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index 84b7127c0121..df2e1b3ddfe2 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -12,10 +12,6 @@
 #ifndef FAS216_H
 #define FAS216_H
 
-#ifndef NO_IRQ
-#define NO_IRQ 255
-#endif
-
 #include <scsi/scsi_eh.h>
 
 #include "queue.h"
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index ef7a21a6a01b..2ca5959ec3fa 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -38,6 +38,7 @@
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach/serial_sa1100.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 4bde4f9821ba..e1004fb37bd9 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -16,29 +16,115 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/assabet.h>
-#include <mach/badge4.h>
 #include <asm/hardware/sa1111.h>
 
 #ifndef CONFIG_SA1111
 #error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
 #endif
 
-extern int usb_disabled(void);
+#define USB_STATUS	0x0118
+#define USB_RESET	0x011c
+#define USB_IRQTEST	0x0120
+
+#define USB_RESET_FORCEIFRESET	(1 << 0)
+#define USB_RESET_FORCEHCRESET	(1 << 1)
+#define USB_RESET_CLKGENRESET	(1 << 2)
+#define USB_RESET_SIMSCALEDOWN	(1 << 3)
+#define USB_RESET_USBINTTEST	(1 << 4)
+#define USB_RESET_SLEEPSTBYEN	(1 << 5)
+#define USB_RESET_PWRSENSELOW	(1 << 6)
+#define USB_RESET_PWRCTRLLOW	(1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
+#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
+#define USB_STATUS_NIRQHCIM       (1 <<  9)
+#define USB_STATUS_NHCIMFCLR      (1 << 10)
+#define USB_STATUS_USBPWRSENSE    (1 << 11)
 
-/*-------------------------------------------------------------------------*/
+#if 0
+static void dump_hci_status(struct usb_hcd *hcd, const char *label)
+{
+	unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
+
+	dbg("%s USB_STATUS = { %s%s%s%s%s}", label,
+	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
+	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
+	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
+	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
+	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
+}
+#endif
 
-static void sa1111_start_hc(struct sa1111_dev *dev)
+static int ohci_sa1111_reset(struct usb_hcd *hcd)
 {
-	unsigned int usb_rst = 0;
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
 
-	printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n",
-	       __FILE__);
+static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int ret;
 
-#ifdef CONFIG_SA1100_BADGE4
-	if (machine_is_badge4()) {
-		badge4_set_5V(BADGE4_5V_USB, 1);
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		ohci_err(ohci, "can't start\n");
+		ohci_stop(hcd);
 	}
+	return ret;
+}
+
+static const struct hc_driver ohci_sa1111_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"SA-1111 OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ohci_sa1111_reset,
+	.start =		ohci_sa1111_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
 #endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+static int sa1111_start_hc(struct sa1111_dev *dev)
+{
+	unsigned int usb_rst = 0;
+	int ret;
+
+	dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
 
 	if (machine_is_xp860() ||
 	    machine_has_neponset() ||
@@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
 	 * host controller in reset.
 	 */
 	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
-		      dev->mapbase + SA1111_USB_RESET);
+		      dev->mapbase + USB_RESET);
 
 	/*
 	 * Now, carefully enable the USB clock, and take
 	 * the USB host controller out of reset.
 	 */
-	sa1111_enable_device(dev);
-	udelay(11);
-	sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET);
+	ret = sa1111_enable_device(dev);
+	if (ret == 0) {
+		udelay(11);
+		sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
+	}
+
+	return ret;
 }
 
 static void sa1111_stop_hc(struct sa1111_dev *dev)
 {
 	unsigned int usb_rst;
-	printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n",
-	       __FILE__);
+
+	dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
 
 	/*
 	 * Put the USB host controller into reset.
 	 */
-	usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET);
+	usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
 	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
-		      dev->mapbase + SA1111_USB_RESET);
+		      dev->mapbase + USB_RESET);
 
 	/*
 	 * Stop the USB clock.
 	 */
 	sa1111_disable_device(dev);
-
-#ifdef CONFIG_SA1100_BADGE4
-	if (machine_is_badge4()) {
-		/* Disable power to the USB bus */
-		badge4_set_5V(BADGE4_5V_USB, 0);
-	}
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-#if 0
-static void dump_hci_status(struct usb_hcd *hcd, const char *label)
-{
-	unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS);
-
-	dbg ("%s USB_STATUS = { %s%s%s%s%s}", label,
-	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
-	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
-	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
-	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
-	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
 }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
 
 /**
- * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs
- * Context: !in_interrupt()
+ * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
  *
  * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- * Store this function in the HCD's struct pci_driver as probe().
+ * then invokes the start() method for the HCD associated with it.
  */
-int usb_hcd_sa1111_probe (const struct hc_driver *driver,
-			  struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 {
 	struct usb_hcd *hcd;
-	int retval;
+	int ret;
 
-	hcd = usb_create_hcd (driver, &dev->dev, "sa1111");
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
 	if (!hcd)
 		return -ENOMEM;
+
 	hcd->rsrc_start = dev->res.start;
 	hcd->rsrc_len = resource_size(&dev->res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		dbg("request_mem_region failed");
-		retval = -EBUSY;
+		ret = -EBUSY;
 		goto err1;
 	}
+
 	hcd->regs = dev->mapbase;
 
-	sa1111_start_hc(dev);
-	ohci_hcd_init(hcd_to_ohci(hcd));
+	ret = sa1111_start_hc(dev);
+	if (ret)
+		goto err2;
 
-	retval = usb_add_hcd(hcd, dev->irq[1], 0);
-	if (retval == 0)
-		return retval;
+	ret = usb_add_hcd(hcd, dev->irq[1], 0);
+	if (ret == 0)
+		return ret;
 
 	sa1111_stop_hc(dev);
+ err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  err1:
 	usb_put_hcd(hcd);
-	return retval;
+	return ret;
 }
 
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
 /**
- * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
+ * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
  * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_sa1111_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
  *
+ * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
+ * the HCD's stop() method.
  */
-void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev)
+static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
 {
+	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
+
 	usb_remove_hcd(hcd);
 	sa1111_stop_hc(dev);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
 
-static int __devinit
-ohci_sa1111_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run (ohci)) < 0) {
-		err ("can't start %s", hcd->self.bus_name);
-		ohci_stop (hcd);
-		return ret;
-	}
 	return 0;
 }
 
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_sa1111_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"SA-1111 OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_sa1111_start,
-	.stop =			ohci_stop,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev)
-{
-	int ret;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev);
-	return ret;
-}
-
-static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev)
+static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
 {
 	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
 
-	usb_hcd_sa1111_remove(hcd, dev);
-	return 0;
+	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		hcd->driver->shutdown(hcd);
+		sa1111_stop_hc(dev);
+	}
 }
 
 static struct sa1111_driver ohci_hcd_sa1111_driver = {
 	.drv = {
 		.name	= "sa1111-ohci",
+		.owner	= THIS_MODULE,
 	},
 	.devid		= SA1111_DEVID_USB,
-	.probe		= ohci_hcd_sa1111_drv_probe,
-	.remove		= ohci_hcd_sa1111_drv_remove,
+	.probe		= ohci_hcd_sa1111_probe,
+	.remove		= ohci_hcd_sa1111_remove,
+	.shutdown	= ohci_hcd_sa1111_shutdown,
 };
-
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 98d55d0e2da5..b6325848ad61 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -173,282 +173,48 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 #include <linux/io.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <mach/assabet.h>
 #include <mach/shannon.h>
 
 /*
- * debugging?
- */
-#define DEBUG 0
-/*
  * Complain if VAR is out of range.
  */
 #define DEBUG_VAR 1
 
-#undef ASSABET_PAL_VIDEO
-
 #include "sa1100fb.h"
 
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
-static struct sa1100fb_rgb rgb_4 = {
+static const struct sa1100fb_rgb rgb_4 = {
 	.red	= { .offset = 0,  .length = 4, },
 	.green	= { .offset = 0,  .length = 4, },
 	.blue	= { .offset = 0,  .length = 4, },
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
-static struct sa1100fb_rgb rgb_8 = {
+static const struct sa1100fb_rgb rgb_8 = {
 	.red	= { .offset = 0,  .length = 8, },
 	.green	= { .offset = 0,  .length = 8, },
 	.blue	= { .offset = 0,  .length = 8, },
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
-static struct sa1100fb_rgb def_rgb_16 = {
+static const struct sa1100fb_rgb def_rgb_16 = {
 	.red	= { .offset = 11, .length = 5, },
 	.green	= { .offset = 5,  .length = 6, },
 	.blue	= { .offset = 0,  .length = 5, },
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
-#ifdef CONFIG_SA1100_ASSABET
-#ifndef ASSABET_PAL_VIDEO
-/*
- * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
- * takes an RGB666 signal, but we provide it with an RGB565 signal
- * instead (def_rgb_16).
- */
-static struct sa1100fb_mach_info lq039q2ds54_info __initdata = {
-	.pixclock	= 171521,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 5,		.vsync_len	= 1,
-	.left_margin	= 61,		.upper_margin	= 3,
-	.right_margin	= 9,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#else
-static struct sa1100fb_mach_info pal_info __initdata = {
-	.pixclock	= 67797,	.bpp		= 16,
-	.xres		= 640,		.yres		= 512,
-
-	.hsync_len	= 64,		.vsync_len	= 6,
-	.left_margin	= 125,		.upper_margin	= 70,
-	.right_margin	= 115,		.lower_margin	= 36,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#endif
-
-#ifdef CONFIG_SA1100_H3600
-static struct sa1100fb_mach_info h3600_info __initdata = {
-	.pixclock	= 174757, 	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 3,		.vsync_len	= 3,
-	.left_margin	= 12,		.upper_margin	= 10,
-	.right_margin	= 17,		.lower_margin	= 1,
-
-	.cmap_static	= 1,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-
-static struct sa1100fb_rgb h3600_rgb_16 = {
-	.red	= { .offset = 12, .length = 4, },
-	.green	= { .offset = 7,  .length = 4, },
-	.blue	= { .offset = 1,  .length = 4, },
-	.transp	= { .offset = 0,  .length = 0, },
-};
-#endif
-
-#ifdef CONFIG_SA1100_H3100
-static struct sa1100fb_mach_info h3100_info __initdata = {
-	.pixclock	= 406977, 	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 26,		.vsync_len	= 41,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 4,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 1,
-	.cmap_inverse	= 1,
-
-	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef CONFIG_SA1100_COLLIE
-static struct sa1100fb_mach_info collie_info __initdata = {
-	.pixclock	= 171521,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 5,		.vsync_len	= 1,
-	.left_margin	= 11,		.upper_margin	= 2,
-	.right_margin	= 30,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info __initdata = {
-	.pixclock	= 150000,	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 1,		.vsync_len	= 1,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 2,		.lower_margin	= 0,
-
-	.cmap_greyscale	= 1,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info __initdata = {
-	.pixclock	= 150000,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 2,		.vsync_len	= 3,
-	.left_margin	= 69,		.upper_margin	= 14,
-	.right_margin	= 8,		.lower_margin	= 4,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info __initdata = {
-	.pixclock	= 39721,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 95,		.vsync_len	= 2,
-	.left_margin	= 40,		.upper_margin	= 32,
-	.right_margin	= 24,		.lower_margin	= 11,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-
-#ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info __initdata = {
-	.pixclock	= 63291,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 64,		.vsync_len	= 3,
-	.left_margin	= 122,		.upper_margin	= 45,
-	.right_margin	= 10,		.lower_margin	= 10,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
-};
-#endif
-
-#ifdef CONFIG_SA1100_SHANNON
-static struct sa1100fb_mach_info shannon_info __initdata = {
-	.pixclock	= 152500,	.bpp		= 8,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 4,		.vsync_len	= 3,
-	.left_margin	= 2,		.upper_margin	= 0,
-	.right_margin	= 1,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
-	.lccr3		= LCCR3_ACBsDiv(512),
-};
-#endif
-
 
 
-static struct sa1100fb_mach_info * __init
-sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
-{
-	struct sa1100fb_mach_info *inf = NULL;
-
-	/*
-	 *            R        G       B       T
-	 * default  {11,5}, { 5,6}, { 0,5}, { 0,0}
-	 * h3600    {12,4}, { 7,4}, { 1,4}, { 0,0}
-	 * freebird { 8,4}, { 4,4}, { 0,4}, {12,4}
-	 */
-#ifdef CONFIG_SA1100_ASSABET
-	if (machine_is_assabet()) {
-#ifndef ASSABET_PAL_VIDEO
-		inf = &lq039q2ds54_info;
-#else
-		inf = &pal_info;
-#endif
-	}
-#endif
-#ifdef CONFIG_SA1100_H3100
-	if (machine_is_h3100()) {
-		inf = &h3100_info;
-	}
-#endif
-#ifdef CONFIG_SA1100_H3600
-	if (machine_is_h3600()) {
-		inf = &h3600_info;
-		fbi->rgb[RGB_16] = &h3600_rgb_16;
-	}
-#endif
-#ifdef CONFIG_SA1100_COLLIE
-	if (machine_is_collie()) {
-		inf = &collie_info;
-	}
-#endif
-#ifdef CONFIG_SA1100_LART
-	if (machine_is_lart()) {
-#ifdef LART_GREY_LCD
-		inf = &lart_grey_info;
-#endif
-#ifdef LART_COLOR_LCD
-		inf = &lart_color_info;
-#endif
-#ifdef LART_VIDEO_OUT
-		inf = &lart_video_info;
-#endif
-#ifdef LART_KIT01_LCD
-		inf = &lart_kit01_info;
-#endif
-	}
-#endif
-#ifdef CONFIG_SA1100_SHANNON
-	if (machine_is_shannon()) {
-		inf = &shannon_info;
-	}
-#endif
-	return inf;
-}
-
 static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *);
 static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state);
 
@@ -533,7 +299,7 @@ sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	 * is what you poke into the framebuffer to produce the
 	 * colour you requested.
 	 */
-	if (fbi->cmap_inverse) {
+	if (fbi->inf->cmap_inverse) {
 		red   = 0xffff - red;
 		green = 0xffff - green;
 		blue  = 0xffff - blue;
@@ -607,14 +373,14 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		var->xres = MIN_XRES;
 	if (var->yres < MIN_YRES)
 		var->yres = MIN_YRES;
-	if (var->xres > fbi->max_xres)
-		var->xres = fbi->max_xres;
-	if (var->yres > fbi->max_yres)
-		var->yres = fbi->max_yres;
+	if (var->xres > fbi->inf->xres)
+		var->xres = fbi->inf->xres;
+	if (var->yres > fbi->inf->yres)
+		var->yres = fbi->inf->yres;
 	var->xres_virtual = max(var->xres_virtual, var->xres);
 	var->yres_virtual = max(var->yres_virtual, var->yres);
 
-	DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+	dev_dbg(fbi->dev, "var->bits_per_pixel=%d\n", var->bits_per_pixel);
 	switch (var->bits_per_pixel) {
 	case 4:
 		rgbidx = RGB_4;
@@ -638,16 +404,16 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	var->blue   = fbi->rgb[rgbidx]->blue;
 	var->transp = fbi->rgb[rgbidx]->transp;
 
-	DPRINTK("RGBT length = %d:%d:%d:%d\n",
+	dev_dbg(fbi->dev, "RGBT length = %d:%d:%d:%d\n",
 		var->red.length, var->green.length, var->blue.length,
 		var->transp.length);
 
-	DPRINTK("RGBT offset = %d:%d:%d:%d\n",
+	dev_dbg(fbi->dev, "RGBT offset = %d:%d:%d:%d\n",
 		var->red.offset, var->green.offset, var->blue.offset,
 		var->transp.offset);
 
 #ifdef CONFIG_CPU_FREQ
-	printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n",
+	dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n",
 		sa1100fb_display_dma_period(var),
 		cpufreq_get(smp_processor_id()));
 #endif
@@ -655,22 +421,10 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	return 0;
 }
 
-static inline void sa1100fb_set_truecolor(u_int is_true_color)
+static void sa1100fb_set_visual(struct sa1100fb_info *fbi, u32 visual)
 {
-	if (machine_is_assabet()) {
-#if 1		// phase 4 or newer Assabet's
-		if (is_true_color)
-			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-		else
-			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-#else
-		// older Assabet's
-		if (is_true_color)
-			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-		else
-			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-#endif
-	}
+	if (fbi->inf->set_visual)
+		fbi->inf->set_visual(visual);
 }
 
 /*
@@ -683,11 +437,11 @@ static int sa1100fb_set_par(struct fb_info *info)
 	struct fb_var_screeninfo *var = &info->var;
 	unsigned long palette_mem_size;
 
-	DPRINTK("set_par\n");
+	dev_dbg(fbi->dev, "set_par\n");
 
 	if (var->bits_per_pixel == 16)
 		fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
-	else if (!fbi->cmap_static)
+	else if (!fbi->inf->cmap_static)
 		fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
 	else {
 		/*
@@ -704,7 +458,7 @@ static int sa1100fb_set_par(struct fb_info *info)
 
 	palette_mem_size = fbi->palette_size * sizeof(u16);
 
-	DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+	dev_dbg(fbi->dev, "palette_mem_size = 0x%08lx\n", palette_mem_size);
 
 	fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
 	fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
@@ -712,7 +466,7 @@ static int sa1100fb_set_par(struct fb_info *info)
 	/*
 	 * Set (any) board control register to handle new color depth
 	 */
-	sa1100fb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
+	sa1100fb_set_visual(fbi, fbi->fb.fix.visual);
 	sa1100fb_activate_var(var, fbi);
 
 	return 0;
@@ -728,7 +482,7 @@ sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
 	/*
 	 * Make sure the user isn't doing something stupid.
 	 */
-	if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->cmap_static))
+	if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->inf->cmap_static))
 		return -EINVAL;
 
 	return gen_set_cmap(cmap, kspc, con, info);
@@ -775,7 +529,7 @@ static int sa1100fb_blank(int blank, struct fb_info *info)
 	struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
 	int i;
 
-	DPRINTK("sa1100fb_blank: blank=%d\n", blank);
+	dev_dbg(fbi->dev, "sa1100fb_blank: blank=%d\n", blank);
 
 	switch (blank) {
 	case FB_BLANK_POWERDOWN:
@@ -863,43 +617,43 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	u_int half_screen_size, yres, pcd;
 	u_long flags;
 
-	DPRINTK("Configuring SA1100 LCD\n");
+	dev_dbg(fbi->dev, "Configuring SA1100 LCD\n");
 
-	DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
+	dev_dbg(fbi->dev, "var: xres=%d hslen=%d lm=%d rm=%d\n",
 		var->xres, var->hsync_len,
 		var->left_margin, var->right_margin);
-	DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
+	dev_dbg(fbi->dev, "var: yres=%d vslen=%d um=%d bm=%d\n",
 		var->yres, var->vsync_len,
 		var->upper_margin, var->lower_margin);
 
 #if DEBUG_VAR
 	if (var->xres < 16        || var->xres > 1024)
-		printk(KERN_ERR "%s: invalid xres %d\n",
+		dev_err(fbi->dev, "%s: invalid xres %d\n",
 			fbi->fb.fix.id, var->xres);
 	if (var->hsync_len < 1    || var->hsync_len > 64)
-		printk(KERN_ERR "%s: invalid hsync_len %d\n",
+		dev_err(fbi->dev, "%s: invalid hsync_len %d\n",
 			fbi->fb.fix.id, var->hsync_len);
 	if (var->left_margin < 1  || var->left_margin > 255)
-		printk(KERN_ERR "%s: invalid left_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid left_margin %d\n",
 			fbi->fb.fix.id, var->left_margin);
 	if (var->right_margin < 1 || var->right_margin > 255)
-		printk(KERN_ERR "%s: invalid right_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid right_margin %d\n",
 			fbi->fb.fix.id, var->right_margin);
 	if (var->yres < 1         || var->yres > 1024)
-		printk(KERN_ERR "%s: invalid yres %d\n",
+		dev_err(fbi->dev, "%s: invalid yres %d\n",
 			fbi->fb.fix.id, var->yres);
 	if (var->vsync_len < 1    || var->vsync_len > 64)
-		printk(KERN_ERR "%s: invalid vsync_len %d\n",
+		dev_err(fbi->dev, "%s: invalid vsync_len %d\n",
 			fbi->fb.fix.id, var->vsync_len);
 	if (var->upper_margin < 0 || var->upper_margin > 255)
-		printk(KERN_ERR "%s: invalid upper_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid upper_margin %d\n",
 			fbi->fb.fix.id, var->upper_margin);
 	if (var->lower_margin < 0 || var->lower_margin > 255)
-		printk(KERN_ERR "%s: invalid lower_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid lower_margin %d\n",
 			fbi->fb.fix.id, var->lower_margin);
 #endif
 
-	new_regs.lccr0 = fbi->lccr0 |
+	new_regs.lccr0 = fbi->inf->lccr0 |
 		LCCR0_LEN | LCCR0_LDM | LCCR0_BAM |
 		LCCR0_ERM | LCCR0_LtlEnd | LCCR0_DMADel(0);
 
@@ -914,7 +668,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	 * the YRES parameter.
 	 */
 	yres = var->yres;
-	if (fbi->lccr0 & LCCR0_Dual)
+	if (fbi->inf->lccr0 & LCCR0_Dual)
 		yres /= 2;
 
 	new_regs.lccr2 =
@@ -924,14 +678,14 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 		LCCR2_EndFrmDel(var->lower_margin);
 
 	pcd = get_pcd(var->pixclock, cpufreq_get(0));
-	new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->lccr3 |
+	new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 |
 		(var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
 		(var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
 
-	DPRINTK("nlccr0 = 0x%08lx\n", new_regs.lccr0);
-	DPRINTK("nlccr1 = 0x%08lx\n", new_regs.lccr1);
-	DPRINTK("nlccr2 = 0x%08lx\n", new_regs.lccr2);
-	DPRINTK("nlccr3 = 0x%08lx\n", new_regs.lccr3);
+	dev_dbg(fbi->dev, "nlccr0 = 0x%08lx\n", new_regs.lccr0);
+	dev_dbg(fbi->dev, "nlccr1 = 0x%08lx\n", new_regs.lccr1);
+	dev_dbg(fbi->dev, "nlccr2 = 0x%08lx\n", new_regs.lccr2);
+	dev_dbg(fbi->dev, "nlccr3 = 0x%08lx\n", new_regs.lccr3);
 
 	half_screen_size = var->bits_per_pixel;
 	half_screen_size = half_screen_size * var->xres * var->yres / 16;
@@ -951,9 +705,12 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	 * Only update the registers if the controller is enabled
 	 * and something has changed.
 	 */
-	if ((LCCR0 != fbi->reg_lccr0)       || (LCCR1 != fbi->reg_lccr1) ||
-	    (LCCR2 != fbi->reg_lccr2)       || (LCCR3 != fbi->reg_lccr3) ||
-	    (DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2))
+	if (readl_relaxed(fbi->base + LCCR0) != fbi->reg_lccr0 ||
+	    readl_relaxed(fbi->base + LCCR1) != fbi->reg_lccr1 ||
+	    readl_relaxed(fbi->base + LCCR2) != fbi->reg_lccr2 ||
+	    readl_relaxed(fbi->base + LCCR3) != fbi->reg_lccr3 ||
+	    readl_relaxed(fbi->base + DBAR1) != fbi->dbar1 ||
+	    readl_relaxed(fbi->base + DBAR2) != fbi->dbar2)
 		sa1100fb_schedule_work(fbi, C_REENABLE);
 
 	return 0;
@@ -967,18 +724,18 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
  */
 static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
 {
-	DPRINTK("backlight o%s\n", on ? "n" : "ff");
+	dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff");
 
-	if (sa1100fb_backlight_power)
-		sa1100fb_backlight_power(on);
+	if (fbi->inf->backlight_power)
+		fbi->inf->backlight_power(on);
 }
 
 static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on)
 {
-	DPRINTK("LCD power o%s\n", on ? "n" : "ff");
+	dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff");
 
-	if (sa1100fb_lcd_power)
-		sa1100fb_lcd_power(on);
+	if (fbi->inf->lcd_power)
+		fbi->inf->lcd_power(on);
 }
 
 static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
@@ -1008,14 +765,25 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
 	}
 
 	if (mask) {
+		unsigned long flags;
+
+		/*
+		 * SA-1100 requires the GPIO direction register set
+		 * appropriately for the alternate function.  Hence
+		 * we set it here via bitmask rather than excessive
+		 * fiddling via the GPIO subsystem - and even then
+		 * we'll still have to deal with GAFR.
+		 */
+		local_irq_save(flags);
 		GPDR |= mask;
 		GAFR |= mask;
+		local_irq_restore(flags);
 	}
 }
 
 static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 {
-	DPRINTK("Enabling LCD controller\n");
+	dev_dbg(fbi->dev, "Enabling LCD controller\n");
 
 	/*
 	 * Make sure the mode bits are present in the first palette entry
@@ -1024,43 +792,46 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 	fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var);
 
 	/* Sequence from 11.7.10 */
-	LCCR3 = fbi->reg_lccr3;
-	LCCR2 = fbi->reg_lccr2;
-	LCCR1 = fbi->reg_lccr1;
-	LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN;
-	DBAR1 = fbi->dbar1;
-	DBAR2 = fbi->dbar2;
-	LCCR0 |= LCCR0_LEN;
-
-	if (machine_is_shannon()) {
-		GPDR |= SHANNON_GPIO_DISP_EN;
-		GPSR |= SHANNON_GPIO_DISP_EN;
-	}
-
-	DPRINTK("DBAR1 = 0x%08x\n", DBAR1);
-	DPRINTK("DBAR2 = 0x%08x\n", DBAR2);
-	DPRINTK("LCCR0 = 0x%08x\n", LCCR0);
-	DPRINTK("LCCR1 = 0x%08x\n", LCCR1);
-	DPRINTK("LCCR2 = 0x%08x\n", LCCR2);
-	DPRINTK("LCCR3 = 0x%08x\n", LCCR3);
+	writel_relaxed(fbi->reg_lccr3, fbi->base + LCCR3);
+	writel_relaxed(fbi->reg_lccr2, fbi->base + LCCR2);
+	writel_relaxed(fbi->reg_lccr1, fbi->base + LCCR1);
+	writel_relaxed(fbi->reg_lccr0 & ~LCCR0_LEN, fbi->base + LCCR0);
+	writel_relaxed(fbi->dbar1, fbi->base + DBAR1);
+	writel_relaxed(fbi->dbar2, fbi->base + DBAR2);
+	writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0);
+
+	if (machine_is_shannon())
+		gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
+
+	dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1));
+	dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
+	dev_dbg(fbi->dev, "LCCR0: 0x%08x\n", readl_relaxed(fbi->base + LCCR0));
+	dev_dbg(fbi->dev, "LCCR1: 0x%08x\n", readl_relaxed(fbi->base + LCCR1));
+	dev_dbg(fbi->dev, "LCCR2: 0x%08x\n", readl_relaxed(fbi->base + LCCR2));
+	dev_dbg(fbi->dev, "LCCR3: 0x%08x\n", readl_relaxed(fbi->base + LCCR3));
 }
 
 static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 {
 	DECLARE_WAITQUEUE(wait, current);
+	u32 lccr0;
 
-	DPRINTK("Disabling LCD controller\n");
+	dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
-	if (machine_is_shannon()) {
-		GPCR |= SHANNON_GPIO_DISP_EN;
-	}	
+	if (machine_is_shannon())
+		gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
 
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	add_wait_queue(&fbi->ctrlr_wait, &wait);
 
-	LCSR = 0xffffffff;	/* Clear LCD Status Register */
-	LCCR0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
-	LCCR0 &= ~LCCR0_LEN;	/* Disable LCD Controller */
+	/* Clear LCD Status Register */
+	writel_relaxed(~0, fbi->base + LCSR);
+
+	lccr0 = readl_relaxed(fbi->base + LCCR0);
+	lccr0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
+	writel_relaxed(lccr0, fbi->base + LCCR0);
+	lccr0 &= ~LCCR0_LEN;	/* Disable LCD Controller */
+	writel_relaxed(lccr0, fbi->base + LCCR0);
 
 	schedule_timeout(20 * HZ / 1000);
 	remove_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1072,14 +843,15 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id)
 {
 	struct sa1100fb_info *fbi = dev_id;
-	unsigned int lcsr = LCSR;
+	unsigned int lcsr = readl_relaxed(fbi->base + LCSR);
 
 	if (lcsr & LCSR_LDD) {
-		LCCR0 |= LCCR0_LDM;
+		u32 lccr0 = readl_relaxed(fbi->base + LCCR0) | LCCR0_LDM;
+		writel_relaxed(lccr0, fbi->base + LCCR0);
 		wake_up(&fbi->ctrlr_wait);
 	}
 
-	LCSR = lcsr;
+	writel_relaxed(lcsr, fbi->base + LCSR);
 	return IRQ_HANDLED;
 }
 
@@ -1268,7 +1040,7 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
 	switch (val) {
 	case CPUFREQ_ADJUST:
 	case CPUFREQ_INCOMPATIBLE:
-		printk(KERN_DEBUG "min dma period: %d ps, "
+		dev_dbg(fbi->dev, "min dma period: %d ps, "
 			"new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
 			policy->max);
 		/* todo: fill in min/max values */
@@ -1318,7 +1090,7 @@ static int sa1100fb_resume(struct platform_device *dev)
  *      cache.  Once this area is remapped, all virtual memory
  *      access to the video memory should occur at the new region.
  */
-static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
+static int __devinit sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
 {
 	/*
 	 * We reserve one page for the palette, plus the size
@@ -1344,7 +1116,7 @@ static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
 }
 
 /* Fake monspecs to fill in fbinfo structure */
-static struct fb_monspecs monspecs __initdata = {
+static struct fb_monspecs monspecs __devinitdata = {
 	.hfmin	= 30000,
 	.hfmax	= 70000,
 	.vfmin	= 50,
@@ -1352,10 +1124,11 @@ static struct fb_monspecs monspecs __initdata = {
 };
 
 
-static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
+static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 {
-	struct sa1100fb_mach_info *inf;
+	struct sa1100fb_mach_info *inf = dev->platform_data;
 	struct sa1100fb_info *fbi;
+	unsigned i;
 
 	fbi = kmalloc(sizeof(struct sa1100fb_info) + sizeof(u32) * 16,
 		      GFP_KERNEL);
@@ -1390,8 +1163,6 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 	fbi->rgb[RGB_8]		= &rgb_8;
 	fbi->rgb[RGB_16]	= &def_rgb_16;
 
-	inf = sa1100fb_get_machine_info(fbi);
-
 	/*
 	 * People just don't seem to get this.  We don't support
 	 * anything but correct entries now, so panic if someone
@@ -1402,13 +1173,10 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 		panic("sa1100fb error: invalid LCCR3 fields set or zero "
 			"pixclock.");
 
-	fbi->max_xres			= inf->xres;
 	fbi->fb.var.xres		= inf->xres;
 	fbi->fb.var.xres_virtual	= inf->xres;
-	fbi->max_yres			= inf->yres;
 	fbi->fb.var.yres		= inf->yres;
 	fbi->fb.var.yres_virtual	= inf->yres;
-	fbi->max_bpp			= inf->bpp;
 	fbi->fb.var.bits_per_pixel	= inf->bpp;
 	fbi->fb.var.pixclock		= inf->pixclock;
 	fbi->fb.var.hsync_len		= inf->hsync_len;
@@ -1419,14 +1187,16 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 	fbi->fb.var.lower_margin	= inf->lower_margin;
 	fbi->fb.var.sync		= inf->sync;
 	fbi->fb.var.grayscale		= inf->cmap_greyscale;
-	fbi->cmap_inverse		= inf->cmap_inverse;
-	fbi->cmap_static		= inf->cmap_static;
-	fbi->lccr0			= inf->lccr0;
-	fbi->lccr3			= inf->lccr3;
 	fbi->state			= C_STARTUP;
 	fbi->task_state			= (u_char)-1;
-	fbi->fb.fix.smem_len		= fbi->max_xres * fbi->max_yres *
-					  fbi->max_bpp / 8;
+	fbi->fb.fix.smem_len		= inf->xres * inf->yres *
+					  inf->bpp / 8;
+	fbi->inf			= inf;
+
+	/* Copy the RGB bitfield overrides */
+	for (i = 0; i < NR_RGB; i++)
+		if (inf->rgb[i])
+			fbi->rgb[i] = inf->rgb[i];
 
 	init_waitqueue_head(&fbi->ctrlr_wait);
 	INIT_WORK(&fbi->task, sa1100fb_task);
@@ -1438,13 +1208,20 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 static int __devinit sa1100fb_probe(struct platform_device *pdev)
 {
 	struct sa1100fb_info *fbi;
+	struct resource *res;
 	int ret, irq;
 
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "no platform LCD data\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	if (irq < 0 || !res)
 		return -EINVAL;
 
-	if (!request_mem_region(0xb0100000, 0x10000, "LCD"))
+	if (!request_mem_region(res->start, resource_size(res), "LCD"))
 		return -EBUSY;
 
 	fbi = sa1100fb_init_fbinfo(&pdev->dev);
@@ -1452,6 +1229,10 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 	if (!fbi)
 		goto failed;
 
+	fbi->base = ioremap(res->start, resource_size(res));
+	if (!fbi->base)
+		goto failed;
+
 	/* Initialize video memory */
 	ret = sa1100fb_map_video_memory(fbi);
 	if (ret)
@@ -1459,14 +1240,16 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 
 	ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi);
 	if (ret) {
-		printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
+		dev_err(&pdev->dev, "request_irq failed: %d\n", ret);
 		goto failed;
 	}
 
-#ifdef ASSABET_PAL_VIDEO
-	if (machine_is_assabet())
-		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
-#endif
+	if (machine_is_shannon()) {
+		ret = gpio_request_one(SHANNON_GPIO_DISP_EN,
+			GPIOF_OUT_INIT_LOW, "display enable");
+		if (ret)
+			goto err_free_irq;
+	}
 
 	/*
 	 * This makes sure that our colour bitfield
@@ -1478,7 +1261,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 
 	ret = register_framebuffer(&fbi->fb);
 	if (ret < 0)
-		goto err_free_irq;
+		goto err_reg_fb;
 
 #ifdef CONFIG_CPU_FREQ
 	fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
@@ -1490,12 +1273,17 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 	/* This driver cannot be unloaded at the moment */
 	return 0;
 
+ err_reg_fb:
+	if (machine_is_shannon())
+		gpio_free(SHANNON_GPIO_DISP_EN);
  err_free_irq:
 	free_irq(irq, fbi);
  failed:
+	if (fbi)
+		iounmap(fbi->base);
 	platform_set_drvdata(pdev, NULL);
 	kfree(fbi);
-	release_mem_region(0xb0100000, 0x10000);
+	release_mem_region(res->start, resource_size(res));
 	return ret;
 }
 
@@ -1505,6 +1293,7 @@ static struct platform_driver sa1100fb_driver = {
 	.resume		= sa1100fb_resume,
 	.driver		= {
 		.name	= "sa11x0-fb",
+		.owner	= THIS_MODULE,
 	},
 };
 
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 1c3b459865d8..fc5d4292fad6 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -10,44 +10,15 @@
  * for more details.
  */
 
-/*
- * These are the bitfields for each
- * display depth that we support.
- */
-struct sa1100fb_rgb {
-	struct fb_bitfield	red;
-	struct fb_bitfield	green;
-	struct fb_bitfield	blue;
-	struct fb_bitfield	transp;
-};
-
-/*
- * This structure describes the machine which we are running on.
- */
-struct sa1100fb_mach_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_char		bpp;
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	u_int		cmap_greyscale:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	u_int		lccr0;
-	u_int		lccr3;
-};
+#define LCCR0           0x0000          /* LCD Control Reg. 0 */
+#define LCSR            0x0004          /* LCD Status Reg. */
+#define DBAR1           0x0010          /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1           0x0014          /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2           0x0018          /* LCD DMA Base Address Reg.  channel 2 */
+#define DCAR2           0x001C          /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1           0x0020          /* LCD Control Reg. 1 */
+#define LCCR2           0x0024          /* LCD Control Reg. 2 */
+#define LCCR3           0x0028          /* LCD Control Reg. 3 */
 
 /* Shadows for LCD controller registers */
 struct sa1100fb_lcd_reg {
@@ -57,19 +28,11 @@ struct sa1100fb_lcd_reg {
 	unsigned long lccr3;
 };
 
-#define RGB_4	(0)
-#define RGB_8	(1)
-#define RGB_16	(2)
-#define NR_RGB	3
-
 struct sa1100fb_info {
 	struct fb_info		fb;
 	struct device		*dev;
-	struct sa1100fb_rgb	*rgb[NR_RGB];
-
-	u_int			max_bpp;
-	u_int			max_xres;
-	u_int			max_yres;
+	const struct sa1100fb_rgb *rgb[NR_RGB];
+	void __iomem		*base;
 
 	/*
 	 * These are the addresses we mapped
@@ -88,12 +51,6 @@ struct sa1100fb_info {
 	dma_addr_t		dbar1;
 	dma_addr_t		dbar2;
 
-	u_int			lccr0;
-	u_int			lccr3;
-	u_int			cmap_inverse:1,
-				cmap_static:1,
-				unused:30;
-
 	u_int			reg_lccr0;
 	u_int			reg_lccr1;
 	u_int			reg_lccr2;
@@ -109,6 +66,8 @@ struct sa1100fb_info {
 	struct notifier_block	freq_transition;
 	struct notifier_block	freq_policy;
 #endif
+
+	const struct sa1100fb_mach_info *inf;
 };
 
 #define TO_INF(ptr,member)	container_of(ptr,struct sa1100fb_info,member)
@@ -130,15 +89,6 @@ struct sa1100fb_info {
 #define SA1100_NAME	"SA1100"
 
 /*
- *  Debug macros 
- */
-#if DEBUG
-#  define DPRINTK(fmt, args...)	printk("%s: " fmt, __func__ , ## args)
-#else
-#  define DPRINTK(fmt, args...)
-#endif
-
-/*
  * Minimum X and Y resolutions
  */
 #define MIN_XRES	64