diff options
| author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2022-12-05 21:48:45 +0200 |
|---|---|---|
| committer | Paolo Abeni <pabeni@redhat.com> | 2022-12-07 16:08:06 +0100 |
| commit | 87a39882b5ab3127700ac4b9277608075f98eda2 (patch) | |
| tree | 1f2a730b4e9544ad03f57ebf4dda5136d24fdc2e /drivers | |
| parent | 9e624651859214fb2c4e442b059eba0aefcd0801 (diff) | |
| download | linux-87a39882b5ab3127700ac4b9277608075f98eda2.tar.bz2 | |
net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
The ethernet-controller dt-schema, mostly pushed forward by Linux, has
the "internal" PHY mode for denoting MAC connections to an internal PHY.
U-Boot may provide device tree blobs where this phy-mode is specified,
so make the Linux driver accept them.
It appears that the current behavior with phy-mode = "internal" was
introduced when mv88e6xxx started reporting supported_interfaces to
phylink. Prior to that, I don't think it would have any issues accepting
this phy-mode.
Fixes: d4ebf12bcec4 ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities")
Link: https://lore.kernel.org/linux-arm-kernel/20221205172709.kglithpbhdbsakvd@skbuf/T/
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx6q-gw904.dts
Link: https://lore.kernel.org/r/20221205194845.2131161-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/dsa/mv88e6xxx/chip.c | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 2479be3a1e35..937cb22cb3d4 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -833,10 +833,13 @@ static void mv88e6xxx_get_caps(struct dsa_switch *ds, int port, chip->info->ops->phylink_get_caps(chip, port, config); - /* Internal ports need GMII for PHYLIB */ - if (mv88e6xxx_phy_is_internal(ds, port)) + if (mv88e6xxx_phy_is_internal(ds, port)) { + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + /* Internal ports with no phy-mode need GMII for PHYLIB */ __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); + } } static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, |