diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-12 18:17:42 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-12 18:17:42 -0700 |
| commit | 3d076fec5a0c3e66e1d8cb16015ea9a59b66ae1b (patch) | |
| tree | 8ccfcb6e59d3d3f1d2ebd3371130ccd51b0cf2e1 /drivers | |
| parent | 4a9350597aff50bbd0f4b80ccf49d2e02d1111f5 (diff) | |
| parent | 03c4cd6f89e074a51e289eb9129ac646f0f2bd29 (diff) | |
| download | linux-3d076fec5a0c3e66e1d8cb16015ea9a59b66ae1b.tar.bz2 | |
Merge tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"New drivers:
- Microchip PolarFire
- Nuvoton NCT3018Y
- TI K3 RTC
Subsystem:
- Replace flush_scheduled_work() with flush_work()
- Remove deprecated ida_simple_get()/ida_simple_remove() calls
Drivers:
- use simple i2c probe where possible
- sun6i: add R329 support
- zynqmp: add calibration support
- vr41xx: remove unused driver"
* tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
rtc: spear: set range max
rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
rtc: zynqmp: initialize fract_tick
rtc: Add NCT3018Y real time clock driver
dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
rtc: rx8025: fix 12/24 hour mode detection on RX-8035
rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
rtc: vr41xx: remove driver
rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
rtc: rv8803: fix missing unlock on error in rv8803_set_time()
rtc: zynqmp: Add calibration set and get support
rtc: zynqmp: Updated calibration value
dt-bindings: rtc: zynqmp: Add clock information
rtc: sun6i: add support for R329 RTC
rtc: Directly use ida_alloc()/free()
rtc: Introduce ti-k3-rtc
dt-bindings: rtc: Add TI K3 RTC description
dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
...
Diffstat (limited to 'drivers')
39 files changed, 1846 insertions, 506 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index a00f901b5c1d..b8de25118ad0 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -383,6 +383,16 @@ config RTC_DRV_MAX77686 This driver can also be built as a module. If so, the module will be called rtc-max77686. +config RTC_DRV_NCT3018Y + tristate "Nuvoton NCT3018Y" + depends on OF + help + If you say yes here you get support for the Nuvoton NCT3018Y I2C RTC + chip. + + This driver can also be built as a module, if so, the module will be + called "rtc-nct3018y". + config RTC_DRV_RK808 tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC" depends on MFD_RK808 @@ -1478,16 +1488,6 @@ config RTC_DRV_SUNPLUS This driver can also be built as a module. If so, the module will be called rtc-sunplus. -config RTC_DRV_VR41XX - tristate "NEC VR41XX" - depends on CPU_VR41XX || COMPILE_TEST - help - If you say Y here you will get access to the real time clock - built into your NEC VR41XX CPU. - - To compile this driver as a module, choose M here: the - module will be called rtc-vr41xx. - config RTC_DRV_PL030 tristate "ARM AMBA PL030 RTC" depends on ARM_AMBA @@ -1929,6 +1929,17 @@ config RTC_DRV_ASPEED This driver can also be built as a module, if so, the module will be called "rtc-aspeed". +config RTC_DRV_TI_K3 + tristate "TI K3 RTC" + depends on ARCH_K3 || COMPILE_TEST + select REGMAP_MMIO + help + If you say yes here you get support for the Texas Instruments's + Real Time Clock for K3 architecture. + + This driver can also be built as a module, if so, the module + will be called "rtc-ti-k3". + comment "HID Sensor RTC drivers" config RTC_DRV_HID_SENSOR_TIME @@ -1973,4 +1984,14 @@ config RTC_DRV_MSC313 This driver can also be built as a module, if so, the module will be called "rtc-msc313". +config RTC_DRV_POLARFIRE_SOC + tristate "Microchip PolarFire SoC built-in RTC" + depends on SOC_MICROCHIP_POLARFIRE + help + If you say yes here you will get support for the + built-in RTC on Polarfire SoC. + + This driver can also be built as a module, if so, the module + will be called "rtc-mpfs". + endif # RTC_CLASS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index fb04467b652d..aab22bc63432 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -112,6 +112,7 @@ obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o obj-$(CONFIG_RTC_DRV_MXC_V2) += rtc-mxc_v2.o obj-$(CONFIG_RTC_DRV_GAMECUBE) += rtc-gamecube.o +obj-$(CONFIG_RTC_DRV_NCT3018Y) += rtc-nct3018y.o obj-$(CONFIG_RTC_DRV_NTXEC) += rtc-ntxec.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o @@ -130,6 +131,7 @@ obj-$(CONFIG_RTC_DRV_PIC32) += rtc-pic32.o obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o +obj-$(CONFIG_RTC_DRV_POLARFIRE_SOC) += rtc-mpfs.o obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o obj-$(CONFIG_RTC_DRV_R7301) += rtc-r7301.o @@ -172,11 +174,11 @@ obj-$(CONFIG_RTC_DRV_SUNPLUS) += rtc-sunplus.o obj-$(CONFIG_RTC_DRV_SUNXI) += rtc-sunxi.o obj-$(CONFIG_RTC_DRV_TEGRA) += rtc-tegra.o obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o +obj-$(CONFIG_RTC_DRV_TI_K3) += rtc-ti-k3.o obj-$(CONFIG_RTC_DRV_TPS6586X) += rtc-tps6586x.o obj-$(CONFIG_RTC_DRV_TPS65910) += rtc-tps65910.o obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o -obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_VT8500) += rtc-vt8500.o obj-$(CONFIG_RTC_DRV_WILCO_EC) += rtc-wilco-ec.o obj-$(CONFIG_RTC_DRV_WM831X) += rtc-wm831x.o diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c index 3c8eec2218df..e48223c00c67 100644 --- a/drivers/rtc/class.c +++ b/drivers/rtc/class.c @@ -36,7 +36,7 @@ static void rtc_device_release(struct device *dev) cancel_work_sync(&rtc->irqwork); - ida_simple_remove(&rtc_ida, rtc->id); + ida_free(&rtc_ida, rtc->id); mutex_destroy(&rtc->ops_lock); kfree(rtc); } @@ -262,7 +262,7 @@ static int rtc_device_get_id(struct device *dev) } if (id < 0) - id = ida_simple_get(&rtc_ida, 0, 0, GFP_KERNEL); + id = ida_alloc(&rtc_ida, GFP_KERNEL); return id; } @@ -368,7 +368,7 @@ struct rtc_device *devm_rtc_allocate_device(struct device *dev) rtc = rtc_allocate_device(); if (!rtc) { - ida_simple_remove(&rtc_ida, id); + ida_free(&rtc_ida, id); return ERR_PTR(-ENOMEM); } diff --git a/drivers/rtc/dev.c b/drivers/rtc/dev.c index 69325aeede1a..4aad9bb99868 100644 --- a/drivers/rtc/dev.c +++ b/drivers/rtc/dev.c @@ -96,7 +96,7 @@ static int clear_uie(struct rtc_device *rtc) } if (rtc->uie_task_active) { spin_unlock_irq(&rtc->irq_lock); - flush_scheduled_work(); + flush_work(&rtc->uie_task); spin_lock_irq(&rtc->irq_lock); } rtc->uie_irq_active = 0; @@ -566,9 +566,3 @@ void __init rtc_dev_init(void) if (err < 0) pr_err("failed to allocate char dev region\n"); } - -void __exit rtc_dev_exit(void) -{ - if (rtc_devt) - unregister_chrdev_region(rtc_devt, RTC_DEV_MAX); -} diff --git a/drivers/rtc/rtc-ab-b5ze-s3.c b/drivers/rtc/rtc-ab-b5ze-s3.c index 6e3e320dc727..f2b0971d2c65 100644 --- a/drivers/rtc/rtc-ab-b5ze-s3.c +++ b/drivers/rtc/rtc-ab-b5ze-s3.c @@ -817,8 +817,7 @@ static const struct regmap_config abb5zes3_rtc_regmap_config = { .val_bits = 8, }; -static int abb5zes3_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int abb5zes3_probe(struct i2c_client *client) { struct abb5zes3_rtc_data *data = NULL; struct device *dev = &client->dev; @@ -945,7 +944,7 @@ static struct i2c_driver abb5zes3_driver = { .pm = &abb5zes3_rtc_pm_ops, .of_match_table = of_match_ptr(abb5zes3_dt_match), }, - .probe = abb5zes3_probe, + .probe_new = abb5zes3_probe, .id_table = abb5zes3_id, }; module_i2c_driver(abb5zes3_driver); diff --git a/drivers/rtc/rtc-ab-eoz9.c b/drivers/rtc/rtc-ab-eoz9.c index e188ab517f1e..2f8deb8c4cd3 100644 --- a/drivers/rtc/rtc-ab-eoz9.c +++ b/drivers/rtc/rtc-ab-eoz9.c @@ -495,8 +495,7 @@ static void abeoz9_hwmon_register(struct device *dev, #endif -static int abeoz9_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int abeoz9_probe(struct i2c_client *client) { struct abeoz9_rtc_data *data = NULL; struct device *dev = &client->dev; @@ -580,7 +579,7 @@ static struct i2c_driver abeoz9_driver = { .name = "rtc-ab-eoz9", .of_match_table = of_match_ptr(abeoz9_dt_match), }, - .probe = abeoz9_probe, + .probe_new = abeoz9_probe, .id_table = abeoz9_id, }; diff --git a/drivers/rtc/rtc-bq32k.c b/drivers/rtc/rtc-bq32k.c index 2235c968842d..e0bbb11d912e 100644 --- a/drivers/rtc/rtc-bq32k.c +++ b/drivers/rtc/rtc-bq32k.c @@ -249,8 +249,7 @@ static void bq32k_sysfs_unregister(struct device *dev) device_remove_file(dev, &dev_attr_trickle_charge_bypass); } -static int bq32k_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int bq32k_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct rtc_device *rtc; @@ -322,7 +321,7 @@ static struct i2c_driver bq32k_driver = { .name = "bq32k", .of_match_table = of_match_ptr(bq32k_of_match), }, - .probe = bq32k_probe, + .probe_new = bq32k_probe, .remove = bq32k_remove, .id_table = bq32k_id, }; diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 7c006c2b125f..bdb1df843c78 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -1260,9 +1260,6 @@ static void use_acpi_alarm_quirks(void) if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) return; - if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)) - return; - if (!is_hpet_enabled()) return; diff --git a/drivers/rtc/rtc-core.h b/drivers/rtc/rtc-core.h index 0abf98983e13..4b10a1b8f370 100644 --- a/drivers/rtc/rtc-core.h +++ b/drivers/rtc/rtc-core.h @@ -2,7 +2,6 @@ #ifdef CONFIG_RTC_INTF_DEV extern void __init rtc_dev_init(void); -extern void __exit rtc_dev_exit(void); extern void rtc_dev_prepare(struct rtc_device *rtc); #else @@ -11,10 +10,6 @@ static inline void rtc_dev_init(void) { } -static inline void rtc_dev_exit(void) -{ -} - static inline void rtc_dev_prepare(struct rtc_device *rtc) { } diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c index 70626793ca69..887f5193e253 100644 --- a/drivers/rtc/rtc-cros-ec.c +++ b/drivers/rtc/rtc-cros-ec.c @@ -375,10 +375,8 @@ static int cros_ec_rtc_remove(struct platform_device *pdev) ret = blocking_notifier_chain_unregister( &cros_ec_rtc->cros_ec->event_notifier, &cros_ec_rtc->notifier); - if (ret) { + if (ret) dev_err(dev, "failed to unregister notifier\n"); - return ret; - } return 0; } diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index 8db5a631bca8..b19de5100b1a 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -467,8 +467,7 @@ static const struct watchdog_ops ds1374_wdt_ops = { * ***************************************************************************** */ -static int ds1374_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int ds1374_probe(struct i2c_client *client) { struct ds1374 *ds1374; int ret; @@ -575,7 +574,7 @@ static struct i2c_driver ds1374_driver = { .of_match_table = of_match_ptr(ds1374_of_match), .pm = &ds1374_pm, }, - .probe = ds1374_probe, + .probe_new = ds1374_probe, .remove = ds1374_remove, .id_table = ds1374_id, }; diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c index 4cd8efbef6cf..a3bb2cd9c881 100644 --- a/drivers/rtc/rtc-ds1672.c +++ b/drivers/rtc/rtc-ds1672.c @@ -106,8 +106,7 @@ static const struct rtc_class_ops ds1672_rtc_ops = { .set_time = ds1672_set_time, }; -static int ds1672_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int ds1672_probe(struct i2c_client *client) { int err = 0; struct rtc_device *rtc; @@ -150,7 +149,7 @@ static struct i2c_driver ds1672_driver = { .name = "rtc-ds1672", .of_match_table = of_match_ptr(ds1672_of_match), }, - .probe = &ds1672_probe, + .probe_new = ds1672_probe, .id_table = ds1672_id, }; diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c index 168bc27f1f5a..dd31a60c1fc6 100644 --- a/drivers/rtc/rtc-ds3232.c +++ b/drivers/rtc/rtc-ds3232.c @@ -566,8 +566,7 @@ static const struct dev_pm_ops ds3232_pm_ops = { #if IS_ENABLED(CONFIG_I2C) -static int ds3232_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int ds3232_i2c_probe(struct i2c_client *client) { struct regmap *regmap; static const struct regmap_config config = { @@ -604,7 +603,7 @@ static struct i2c_driver ds3232_driver = { .of_match_table = of_match_ptr(ds3232_of_match), .pm = &ds3232_pm_ops, }, - .probe = ds3232_i2c_probe, + .probe_new = ds3232_i2c_probe, .id_table = ds3232_id, }; diff --git a/drivers/rtc/rtc-em3027.c b/drivers/rtc/rtc-em3027.c index 9f176bce48ba..53f9f9391a5f 100644 --- a/drivers/rtc/rtc-em3027.c +++ b/drivers/rtc/rtc-em3027.c @@ -111,8 +111,7 @@ static const struct rtc_class_ops em3027_rtc_ops = { .set_time = em3027_set_time, }; -static int em3027_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int em3027_probe(struct i2c_client *client) { struct rtc_device *rtc; @@ -148,7 +147,7 @@ static struct i2c_driver em3027_driver = { .name = "rtc-em3027", .of_match_table = of_match_ptr(em3027_of_match), }, - .probe = &em3027_probe, + .probe_new = em3027_probe, .id_table = em3027_id, }; diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c index 677ec2da13d8..f59bb81f23c0 100644 --- a/drivers/rtc/rtc-fm3130.c +++ b/drivers/rtc/rtc-fm3130.c @@ -340,8 +340,7 @@ static const struct rtc_class_ops fm3130_rtc_ops = { static struct i2c_driver fm3130_driver; -static int fm3130_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int fm3130_probe(struct i2c_client *client) { struct fm3130 *fm3130; int err = -ENODEV; @@ -518,7 +517,7 @@ static struct i2c_driver fm3130_driver = { .driver = { .name = "rtc-fm3130", }, - .probe = fm3130_probe, + .probe_new = fm3130_probe, .id_table = fm3130_id, }; diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c index 90e602e99d03..cc710d682121 100644 --- a/drivers/rtc/rtc-hym8563.c +++ b/drivers/rtc/rtc-hym8563.c @@ -495,8 +495,7 @@ static int hym8563_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(hym8563_pm_ops, hym8563_suspend, hym8563_resume); -static int hym8563_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int hym8563_probe(struct i2c_client *client) { struct hym8563 *hym8563; int ret; @@ -572,7 +571,7 @@ static struct i2c_driver hym8563_driver = { .pm = &hym8563_pm_ops, .of_match_table = hym8563_dt_idtable, }, - .probe = hym8563_probe, + .probe_new = hym8563_probe, .id_table = hym8563_id, }; diff --git a/drivers/rtc/rtc-isl12022.c b/drivers/rtc/rtc-isl12022.c index 961bd5d1d109..79461ded1a48 100644 --- a/drivers/rtc/rtc-isl12022.c +++ b/drivers/rtc/rtc-isl12022.c @@ -232,8 +232,7 @@ static const struct rtc_class_ops isl12022_rtc_ops = { .set_time = isl12022_rtc_set_time, }; -static int isl12022_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int isl12022_probe(struct i2c_client *client) { struct isl12022 *isl12022; @@ -275,7 +274,7 @@ static struct i2c_driver isl12022_driver = { .of_match_table = of_match_ptr(isl12022_dt_match), #endif }, - .probe = isl12022_probe, + .probe_new = isl12022_probe, .id_table = isl12022_id, }; diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c index 182dfa605515..f448a525333e 100644 --- a/drivers/rtc/rtc-isl1208.c +++ b/drivers/rtc/rtc-isl1208.c @@ -880,10 +880,14 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id) if (rc) return rc; - if (client->irq > 0) + if (client->irq > 0) { rc = isl1208_setup_irq(client, client->irq); - if (rc) - return rc; + if (rc) + return rc; + + } else { + clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, isl1208->rtc->features); + } if (evdet_irq > 0 && evdet_irq != client->irq) rc = isl1208_setup_irq(client, evdet_irq); diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c index 4beadfa41644..0a33851cc51f 100644 --- a/drivers/rtc/rtc-max6900.c +++ b/drivers/rtc/rtc-max6900.c @@ -197,8 +197,7 @@ static const struct rtc_class_ops max6900_rtc_ops = { .set_time = max6900_rtc_set_time, }; -static int -max6900_probe(struct i2c_client *client, const struct i2c_device_id *id) +static int max6900_probe(struct i2c_client *client) { struct rtc_device *rtc; @@ -225,7 +224,7 @@ static struct i2c_driver max6900_driver = { .driver = { .name = "rtc-max6900", }, - .probe = max6900_probe, + .probe_new = max6900_probe, .id_table = max6900_id, }; diff --git a/drivers/rtc/rtc-mc146818-lib.c b/drivers/rtc/rtc-mc146818-lib.c index 522449b25921..f1c09f1db044 100644 --- a/drivers/rtc/rtc-mc146818-lib.c +++ b/drivers/rtc/rtc-mc146818-lib.c @@ -21,13 +21,13 @@ bool mc146818_avoid_UIP(void (*callback)(unsigned char seconds, void *param), unsigned long flags; unsigned char seconds; - for (i = 0; i < 10; i++) { + for (i = 0; i < 100; i++) { spin_lock_irqsave(&rtc_lock, flags); /* * Check whether there is an update in progress during which the * readout is unspecified. The maximum update time is ~2ms. Poll - * every msec for completion. + * every 100 usec for completion. * * Store the second value before checking UIP so a long lasting * NMI which happens to hit after the UIP check cannot make @@ -37,7 +37,7 @@ bool mc146818_avoid_UIP(void (*callback)(unsigned char seconds, void *param), if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) { spin_unlock_irqrestore(&rtc_lock, flags); - mdelay(1); + udelay(100); continue; } @@ -56,7 +56,7 @@ bool mc146818_avoid_UIP(void (*callback)(unsigned char seconds, void *param), */ if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) { spin_unlock_irqrestore(&rtc_lock, flags); - mdelay(1); + udelay(100); continue; } diff --git a/drivers/rtc/rtc-mpfs.c b/drivers/rtc/rtc-mpfs.c new file mode 100644 index 000000000000..f14d1925e0c9 --- /dev/null +++ b/drivers/rtc/rtc-mpfs.c @@ -0,0 +1,323 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip MPFS RTC driver + * + * Copyright (c) 2021-2022 Microchip Corporation. All rights reserved. + * + * Author: Daire McNamara <daire.mcnamara@microchip.com> + * & Conor Dooley <conor.dooley@microchip.com> + */ +#include "linux/bits.h" +#include "linux/iopoll.h" +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeirq.h> +#include <linux/slab.h> +#include <linux/rtc.h> + +#define CONTROL_REG 0x00 +#define MODE_REG 0x04 +#define PRESCALER_REG 0x08 +#define ALARM_LOWER_REG 0x0c +#define ALARM_UPPER_REG 0x10 +#define COMPARE_LOWER_REG 0x14 +#define COMPARE_UPPER_REG 0x18 +#define DATETIME_LOWER_REG 0x20 +#define DATETIME_UPPER_REG 0x24 + +#define CONTROL_RUNNING_BIT BIT(0) +#define CONTROL_START_BIT BIT(0) +#define CONTROL_STOP_BIT BIT(1) +#define CONTROL_ALARM_ON_BIT BIT(2) +#define CONTROL_ALARM_OFF_BIT BIT(3) +#define CONTROL_RESET_BIT BIT(4) +#define CONTROL_UPLOAD_BIT BIT(5) +#define CONTROL_DOWNLOAD_BIT BIT(6) +#define CONTROL_MATCH_BIT BIT(7) +#define CONTROL_WAKEUP_CLR_BIT BIT(8) +#define CONTROL_WAKEUP_SET_BIT BIT(9) +#define CONTROL_UPDATED_BIT BIT(10) + +#define MODE_CLOCK_CALENDAR BIT(0) +#define MODE_WAKE_EN BIT(1) +#define MODE_WAKE_RESET BIT(2) +#define MODE_WAKE_CONTINUE BIT(3) + +#define MAX_PRESCALER_COUNT GENMASK(25, 0) +#define DATETIME_UPPER_MASK GENMASK(29, 0) +#define ALARM_UPPER_MASK GENMASK(10, 0) + +#define UPLOAD_TIMEOUT_US 50 + +struct mpfs_rtc_dev { + struct rtc_device *rtc; + void __iomem *base; +}; + +static void mpfs_rtc_start(struct mpfs_rtc_dev *rtcdev) +{ + u32 ctrl; + + ctrl = readl(rtcdev->base + CONTROL_REG); + ctrl &= ~CONTROL_STOP_BIT; + ctrl |= CONTROL_START_BIT; + writel(ctrl, rtcdev->base + CONTROL_REG); +} + +static void mpfs_rtc_clear_irq(struct mpfs_rtc_dev *rtcdev) +{ + u32 val = readl(rtcdev->base + CONTROL_REG); + + val &= ~(CONTROL_ALARM_ON_BIT | CONTROL_STOP_BIT); + val |= CONTROL_ALARM_OFF_BIT; + writel(val, rtcdev->base + CONTROL_REG); + /* + * Ensure that the posted write to the CONTROL_REG register completed before + * returning from this function. Not doing this may result in the interrupt + * only being cleared some time after this function returns. + */ + (void)readl(rtcdev->base + CONTROL_REG); +} + +static int mpfs_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev); + u64 time; + + time = readl(rtcdev->base + DATETIME_LOWER_REG); + time |= ((u64)readl(rtcdev->base + DATETIME_UPPER_REG) & DATETIME_UPPER_MASK) << 32; + rtc_time64_to_tm(time, tm); + + return 0; +} + +static int mpfs_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev); + u32 ctrl, prog; + u64 time; + int ret; + + time = rtc_tm_to_time64(tm); + + writel((u32)time, rtcdev->base + DATETIME_LOWER_REG); + writel((u32)(time >> 32) & DATETIME_UPPER_MASK, rtcdev->base + DATETIME_UPPER_REG); + + ctrl = readl(rtcdev->base + CONTROL_REG); + ctrl &= ~CONTROL_STOP_BIT; + ctrl |= CONTROL_UPLOAD_BIT; + writel(ctrl, rtcdev->base + CONTROL_REG); + + ret = read_poll_timeout(readl, prog, prog & CONTROL_UPLOAD_BIT, 0, UPLOAD_TIMEOUT_US, + false, rtcdev->base + CONTROL_REG); + if (ret) { + dev_err(dev, "timed out uploading time to rtc"); + return ret; + } + mpfs_rtc_start(rtcdev); + + return 0; +} + +static int mpfs_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev); + u32 mode = readl(rtcdev->base + MODE_REG); + u64 time; + + alrm->enabled = mode & MODE_WAKE_EN; + + time = (u64)readl(rtcdev->base + ALARM_LOWER_REG) << 32; + time |= (readl(rtcdev->base + ALARM_UPPER_REG) & ALARM_UPPER_MASK); + rtc_time64_to_tm(time, &alrm->time); + + return 0; +} + +static int mpfs_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev); + u32 mode, ctrl; + u64 time; + + /* Disable the alarm before updating */ + ctrl = readl(rtcdev->base + CONTROL_REG); + ctrl |= CONTROL_ALARM_OFF_BIT; + writel(ctrl, rtcdev->base + CONTROL_REG); + + time = rtc_tm_to_time64(&alrm->time); + + writel((u32)time, rtcdev->base + ALARM_LOWER_REG); + writel((u32)(time >> 32) & ALARM_UPPER_MASK, rtcdev->base + ALARM_UPPER_REG); + + /* Bypass compare register in alarm mode */ + writel(GENMASK(31, 0), rtcdev->base + COMPARE_LOWER_REG); + writel(GENMASK(29, 0), rtcdev->base + COMPARE_UPPER_REG); + + /* Configure the RTC to enable the alarm. */ + ctrl = readl(rtcdev->base + CONTROL_REG); + mode = readl(rtcdev->base + MODE_REG); + if (alrm->enabled) { + mode = MODE_WAKE_EN | MODE_WAKE_CONTINUE; + /* Enable the alarm */ + ctrl &= ~CONTROL_ALARM_OFF_BIT; + ctrl |= CONTROL_ALARM_ON_BIT; + } + ctrl &= ~CONTROL_STOP_BIT; + ctrl |= CONTROL_START_BIT; + writel(ctrl, rtcdev->base + CONTROL_REG); + writel(mode, rtcdev->base + MODE_REG); + + return 0; +} + +static int mpfs_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) +{ + struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev); + u32 ctrl; + + ctrl = readl(rtcdev->base + CONTROL_REG); + ctrl &= ~(CONTROL_ALARM_ON_BIT | CONTROL_ALARM_OFF_BIT | CONTROL_STOP_BIT); + + if (enabled) + ctrl |= CONTROL_ALARM_ON_BIT; + else + ctrl |= CONTROL_ALARM_OFF_BIT; + + writel(ctrl, rtcdev->base + CONTROL_REG); + + return 0; +} + +static inline struct clk *mpfs_rtc_init_clk(struct device *dev) +{ + struct clk *clk; + int ret; + + clk = devm_clk_get(dev, "rtc"); + if (IS_ERR(clk)) + return clk; + + ret = clk_prepare_enable(clk); + if (ret) + return ERR_PTR(ret); + + devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare, clk); + return clk; +} + +static irqreturn_t mpfs_rtc_wakeup_irq_handler(int irq, void *dev) +{ + struct mpfs_rtc_dev *rtcdev = dev; + + mpfs_rtc_clear_irq(rtcdev); + + rtc_update_irq(rtcdev->rtc, 1, RTC_IRQF | RTC_AF); + + return IRQ_HANDLED; +} + +static const struct rtc_class_ops mpfs_rtc_ops = { + .read_time = mpfs_rtc_readtime, + .set_time = mpfs_rtc_settime, + .read_alarm = mpfs_rtc_readalarm, + .set_alarm = mpfs_rtc_setalarm, + .alarm_irq_enable = mpfs_rtc_alarm_irq_enable, +}; + +static int mpfs_rtc_probe(struct platform_device *pdev) +{ + struct mpfs_rtc_dev *rtcdev; + struct clk *clk; + u32 prescaler; + int wakeup_irq, ret; + + rtcdev = devm_kzalloc(&pdev->dev, sizeof(struct mpfs_rtc_dev), GFP_KERNEL); + if (!rtcdev) + return -ENOMEM; + + platform_set_drvdata(pdev, rtcdev); + + rtcdev->rtc = devm_rtc_allocate_device(&pdev->dev); + if (IS_ERR(rtcdev->rtc)) + return PTR_ERR(rtcdev->rtc); + + rtcdev->rtc->ops = &mpfs_rtc_ops; + + /* range is capped by alarm max, lower reg is 31:0 & upper is 10:0 */ + rtcdev->rtc->range_max = GENMASK_ULL(42, 0); + + clk = mpfs_rtc_init_clk(&pdev->dev); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + rtcdev->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(rtcdev->base)) { + dev_dbg(&pdev->dev, "invalid ioremap resources\n"); + return PTR_ERR(rtcdev->base); + } + + wakeup_irq = platform_get_irq(pdev, 0); + if (wakeup_irq <= 0) { + dev_dbg(&pdev->dev, "could not get wakeup irq\n"); + return wakeup_irq; + } + ret = devm_request_irq(&pdev->dev, wakeup_irq, mpfs_rtc_wakeup_irq_handler, 0, + dev_name(&pdev->dev), rtcdev); + if (ret) { + dev_dbg(&pdev->dev, "could not request wakeup irq\n"); + return ret; + } + + /* prescaler hardware adds 1 to reg value */ + prescaler = clk_get_rate(devm_clk_get(&pdev->dev, "rtcref")) - 1; + + if (prescaler > MAX_PRESCALER_COUNT) { + dev_dbg(&pdev->dev, "invalid prescaler %d\n", prescaler); + return -EINVAL; + } + + writel(prescaler, rtcdev->base + PRESCALER_REG); + dev_info(&pdev->dev, "prescaler set to: 0x%X \r\n", prescaler); + + device_init_wakeup(&pdev->dev, true); + ret = dev_pm_set_wake_irq(&pdev->dev, wakeup_irq); + if (ret) + dev_err(&pdev->dev, "failed to enable irq wake\n"); + + return devm_rtc_register_device(rtcdev->rtc); +} + +static int mpfs_rtc_remove(struct platform_device *pdev) +{ + dev_pm_clear_wake_irq(&pdev->dev); + + return 0; +} + +static const struct of_device_id mpfs_rtc_of_match[] = { + { .compatible = "microchip,mpfs-rtc" }, + { } +}; + +MODULE_DEVICE_TABLE(of, mpfs_rtc_of_match); + +static struct platform_driver mpfs_rtc_driver = { + .probe = mpfs_rtc_probe, + .remove = mpfs_rtc_remove, + .driver = { + .name = "mpfs_rtc", + .of_match_table = mpfs_rtc_of_match, + }, +}; + +module_platform_driver(mpfs_rtc_driver); + +MODULE_DESCRIPTION("Real time clock for Microchip Polarfire SoC"); +MODULE_AUTHOR("Daire McNamara <daire.mcnamara@microchip.com>"); +MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-nct3018y.c b/drivers/rtc/rtc-nct3018y.c new file mode 100644 index 000000000000..d43acd3920ed --- /dev/null +++ b/drivers/rtc/rtc-nct3018y.c @@ -0,0 +1,553 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2022 Nuvoton Technology Corporation + +#include <linux/bcd.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/rtc.h> +#include <linux/slab.h> + +#define NCT3018Y_REG_SC 0x00 /* seconds */ +#define NCT3018Y_REG_SCA 0x01 /* alarm */ +#define NCT3018Y_REG_MN 0x02 +#define NCT3018Y_REG_MNA 0x03 /* alarm */ +#define NCT3018Y_REG_HR 0x04 +#define NCT3018Y_REG_HRA 0x05 /* alarm */ +#define NCT3018Y_REG_DW 0x06 +#define NCT3018Y_REG_DM 0x07 +#define NCT3018Y_REG_MO 0x08 +#define NCT3018Y_REG_YR 0x09 +#define NCT3018Y_REG_CTRL 0x0A /* timer control */ +#define NCT3018Y_REG_ST 0x0B /* status */ +#define NCT3018Y_REG_CLKO 0x0C /* clock out */ + +#define NCT3018Y_BIT_AF BIT(7) +#define NCT3018Y_BIT_ST BIT(7) +#define NCT3018Y_BIT_DM BIT(6) +#define NCT3018Y_BIT_HF BIT(5) +#define NCT3018Y_BIT_DSM BIT(4) +#define NCT3018Y_BIT_AIE BIT(3) +#define NCT3018Y_BIT_OFIE BIT(2) +#define NCT3018Y_BIT_CIE BIT(1) +#define NCT3018Y_BIT_TWO BIT(0) + +#define NCT3018Y_REG_BAT_MASK 0x07 +#define NCT3018Y_REG_CLKO_F_MASK 0x03 /* frequenc mask */ +#define NCT3018Y_REG_CLKO_CKE 0x80 /* clock out enabled */ + +struct nct3018y { + struct rtc_device *rtc; + struct i2c_client *client; +#ifdef CONFIG_COMMON_CLK + struct clk_hw clkout_hw; +#endif +}; + +static int nct3018y_set_alarm_mode(struct i2c_client *client, bool on) +{ + int err, flags; + + dev_dbg(&client->dev, "%s:on:%d\n", __func__, on); + + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL); + if (flags < 0) { + dev_dbg(&client->dev, + "Failed to read NCT3018Y_REG_CTRL\n"); + return flags; + } + + if (on) + flags |= NCT3018Y_BIT_AIE; + else + flags &= ~NCT3018Y_BIT_AIE; + + flags |= NCT3018Y_BIT_CIE; + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n"); + return err; + } + + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST); + if (flags < 0) { + dev_dbg(&client->dev, + "Failed to read NCT3018Y_REG_ST\n"); + return flags; + } + + flags &= ~(NCT3018Y_BIT_AF); + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_ST, flags); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_ST\n"); + return err; + } + + return 0; +} + +static int nct3018y_get_alarm_mode(struct i2c_client *client, unsigned char *alarm_enable, + unsigned char *alarm_flag) +{ + int flags; + + if (alarm_enable) { + dev_dbg(&client->dev, "%s:NCT3018Y_REG_CTRL\n", __func__); + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL); + if (flags < 0) + return flags; + *alarm_enable = flags & NCT3018Y_BIT_AIE; + } + + if (alarm_flag) { + dev_dbg(&client->dev, "%s:NCT3018Y_REG_ST\n", __func__); + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST); + if (flags < 0) + return flags; + *alarm_flag = flags & NCT3018Y_BIT_AF; + } + + dev_dbg(&client->dev, "%s:alarm_enable:%x alarm_flag:%x\n", + __func__, *alarm_enable, *alarm_flag); + + return 0; +} + +static irqreturn_t nct3018y_irq(int irq, void *dev_id) +{ + struct nct3018y *nct3018y = i2c_get_clientdata(dev_id); + struct i2c_client *client = nct3018y->client; + int err; + unsigned char alarm_flag; + unsigned char alarm_enable; + + dev_dbg(&client->dev, "%s:irq:%d\n", __func__, irq); + err = nct3018y_get_alarm_mode(nct3018y->client, &alarm_enable, &alarm_flag); + if (err) + return IRQ_NONE; + + if (alarm_flag) { + dev_dbg(&client->dev, "%s:alarm flag:%x\n", + __func__, alarm_flag); + rtc_update_irq(nct3018y->rtc, 1, RTC_IRQF | RTC_AF); + nct3018y_set_alarm_mode(nct3018y->client, 0); + dev_dbg(&client->dev, "%s:IRQ_HANDLED\n", __func__); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +/* + * In the routines that deal directly with the nct3018y hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. + */ +static int nct3018y_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char buf[10]; + int err; + + err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_ST, 1, buf); + if (err < 0) + return err; + + if (!buf[0]) { + dev_dbg(&client->dev, " voltage <=1.7, date/time is not reliable.\n"); + return -EINVAL; + } + + err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_SC, sizeof(buf), buf); + if (err < 0) + return err; + + tm->tm_sec = bcd2bin(buf[0] & 0x7F); + tm->tm_min = bcd2bin(buf[2] & 0x7F); + tm->tm_hour = bcd2bin(buf[4] & 0x3F); + tm->tm_wday = buf[6] & 0x07; + tm->tm_mday = bcd2bin(buf[7] & 0x3F); + tm->tm_mon = bcd2bin(buf[8] & 0x1F) - 1; + tm->tm_year = bcd2bin(buf[9]) + 100; + + return 0; +} + +static int nct3018y_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char buf[4] = {0}; + int err; + + buf[0] = bin2bcd(tm->tm_sec); + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_SC, buf[0]); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SC\n"); + return err; + } + + buf[0] = bin2bcd(tm->tm_min); + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_MN, buf[0]); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MN\n"); + return err; + } + + buf[0] = bin2bcd(tm->tm_hour); + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_HR, buf[0]); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HR\n"); + return err; + } + + buf[0] = tm->tm_wday & 0x07; + buf[1] = bin2bcd(tm->tm_mday); + buf[2] = bin2bcd(tm->tm_mon + 1); + buf[3] = bin2bcd(tm->tm_year - 100); + err = i2c_smbus_write_i2c_block_data(client, NCT3018Y_REG_DW, + sizeof(buf), buf); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write for day and mon and year\n"); + return -EIO; + } + + return err; +} + +static int nct3018y_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char buf[5]; + int err; + + err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_SCA, + sizeof(buf), buf); + if (err < 0) { + dev_dbg(&client->dev, "Unable to read date\n"); + return -EIO; + } + + dev_dbg(&client->dev, "%s: raw data is sec=%02x, min=%02x hr=%02x\n", + __func__, buf[0], buf[2], buf[4]); + + tm->time.tm_sec = bcd2bin(buf[0] & 0x7F); + tm->time.tm_min = bcd2bin(buf[2] & 0x7F); + tm->time.tm_hour = bcd2bin(buf[4] & 0x3F); + + err = nct3018y_get_alarm_mode(client, &tm->enabled, &tm->pending); + if (err < 0) + return err; + + dev_dbg(&client->dev, "%s:s=%d m=%d, hr=%d, enabled=%d, pending=%d\n", + __func__, tm->time.tm_sec, tm->time.tm_min, + tm->time.tm_hour, tm->enabled, tm->pending); + + return 0; +} + +static int nct3018y_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + int err; + + dev_dbg(dev, "%s, sec=%d, min=%d hour=%d tm->enabled:%d\n", + __func__, tm->time.tm_sec, tm->time.tm_min, tm->time.tm_hour, + tm->enabled); + + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_SCA, bin2bcd(tm->time.tm_sec)); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SCA\n"); + return err; + } + + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_MNA, bin2bcd(tm->time.tm_min)); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MNA\n"); + return err; + } + + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_HRA, bin2bcd(tm->time.tm_hour)); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HRA\n"); + return err; + } + + return nct3018y_set_alarm_mode(client, tm->enabled); +} + +static int nct3018y_irq_enable(struct device *dev, unsigned int enabled) +{ + dev_dbg(dev, "%s: alarm enable=%d\n", __func__, enabled); + + return nct3018y_set_alarm_mode(to_i2c_client(dev), enabled); +} + +static int nct3018y_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + struct i2c_client *client = to_i2c_client(dev); + int status, flags = 0; + + switch (cmd) { + case RTC_VL_READ: + status = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST); + if (status < 0) + return status; + + if (!(status & NCT3018Y_REG_BAT_MASK)) + flags |= RTC_VL_DATA_INVALID; + + return put_user(flags, (unsigned int __user *)arg); + + default: + return -ENOIOCTLCMD; + } +} + +#ifdef CONFIG_COMMON_CLK +/* + * Handling of the clkout + */ + +#define clkout_hw_to_nct3018y(_hw) container_of(_hw, struct nct3018y, clkout_hw) + +static const int clkout_rates[] = { + 32768, + 1024, + 32, + 1, +}; + +static unsigned long nct3018y_clkout_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw); + struct i2c_client *client = nct3018y->client; + int flags; + + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO); + if (flags < 0) + return 0; + + flags &= NCT3018Y_REG_CLKO_F_MASK; + return clkout_rates[flags]; +} + +static long nct3018y_clkout_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) + if (clkout_rates[i] <= rate) + return clkout_rates[i]; + + return 0; +} + +static int nct3018y_clkout_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw); + struct i2c_client *client = nct3018y->client; + int i, flags; + + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO); + if (flags < 0) + return flags; + + for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) + if (clkout_rates[i] == rate) { + flags &= ~NCT3018Y_REG_CLKO_F_MASK; + flags |= i; + return i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags); + } + + return -EINVAL; +} + +static int nct3018y_clkout_control(struct clk_hw *hw, bool enable) +{ + struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw); + struct i2c_client *client = nct3018y->client; + int flags; + + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO); + if (flags < 0) + return flags; + + if (enable) + flags |= NCT3018Y_REG_CLKO_CKE; + else + flags &= ~NCT3018Y_REG_CLKO_CKE; + + return i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags); +} + +static int nct3018y_clkout_prepare(struct clk_hw *hw) +{ + return nct3018y_clkout_control(hw, 1); +} + +static void nct3018y_clkout_unprepare(struct clk_hw *hw) +{ + nct3018y_clkout_control(hw, 0); +} + +static int nct3018y_clkout_is_prepared(struct clk_hw *hw) +{ + struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw); + struct i2c_client *client = nct3018y->client; + int flags; + + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO); + if (flags < 0) + return flags; + + return flags & NCT3018Y_REG_CLKO_CKE; +} + +static const struct clk_ops nct3018y_clkout_ops = { + .prepare = nct3018y_clkout_prepare, + .unprepare = nct3018y_clkout_unprepare, + .is_prepared = nct3018y_clkout_is_prepared, + .recalc_rate = nct3018y_clkout_recalc_rate, + .round_rate = nct3018y_clkout_round_rate, + .set_rate = nct3018y_clkout_set_rate, +}; + +static struct clk *nct3018y_clkout_register_clk(struct nct3018y *nct3018y) +{ + struct i2c_client *client = nct3018y->client; + struct device_node *node = client->dev.of_node; + struct clk *clk; + struct clk_init_data init; + + init.name = "nct3018y-clkout"; + init.ops = &nct3018y_clkout_ops; + init.flags = 0; + init.parent_names = NULL; + init.num_parents = 0; + nct3018y->clkout_hw.init = &init; + + /* optional override of the clockname */ + of_property_read_string(node, "clock-output-names", &init.name); + + /* register the clock */ + clk = devm_clk_register(&client->dev, &nct3018y->clkout_hw); + + if (!IS_ERR(clk)) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + + return clk; +} +#endif + +static const struct rtc_class_ops nct3018y_rtc_ops = { + .read_time = nct3018y_rtc_read_time, + .set_time = nct3018y_rtc_set_time, + .read_alarm = nct3018y_rtc_read_alarm, + .set_alarm = nct3018y_rtc_set_alarm, + .alarm_irq_enable = nct3018y_irq_enable, + .ioctl = nct3018y_ioctl, +}; + +static int nct3018y_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct nct3018y *nct3018y; + int err, flags; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | + I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BLOCK_DATA)) + return -ENODEV; + + nct3018y = devm_kzalloc(&client->dev, sizeof(struct nct3018y), + GFP_KERNEL); + if (!nct3018y) + return -ENOMEM; + + i2c_set_clientdata(client, nct3018y); + nct3018y->client = client; + device_set_wakeup_capable(&client->dev, 1); + + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL); + if (flags < 0) { + dev_dbg(&client->dev, "%s: read error\n", __func__); + return flags; + } else if (flags & NCT3018Y_BIT_TWO) { + dev_dbg(&client->dev, "%s: NCT3018Y_BIT_TWO is set\n", __func__); + } + + flags = NCT3018Y_BIT_TWO; + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags); + if (err < 0) { + dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n"); + return err; + } + + flags = 0; + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_ST, flags); + if (err < 0) { + dev_dbg(&client->dev, "%s: write error\n", __func__); + return err; + } + + nct3018y->rtc = devm_rtc_allocate_device(&client->dev); + if (IS_ERR(nct3018y->rtc)) + return PTR_ERR(nct3018y->rtc); + + nct3018y->rtc->ops = &nct3018y_rtc_ops; + nct3018y->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; + nct3018y->rtc->range_max = RTC_TIMESTAMP_END_2099; + + if (client->irq > 0) { + err = devm_request_threaded_irq(&client->dev, client->irq, + NULL, nct3018y_irq, + IRQF_ONESHOT | IRQF_TRIGGER_FALLING, + "nct3018y", client); + if (err) { + dev_dbg(&client->dev, "unable to request IRQ %d\n", client->irq); + return err; + } + } else { + clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, nct3018y->rtc->features); + clear_bit(RTC_FEATURE_ALARM, nct3018y->rtc->features); + } + +#ifdef CONFIG_COMMON_CLK + /* register clk in common clk framework */ + nct3018y_clkout_register_clk(nct3018y); +#endif + + return devm_rtc_register_device(nct3018y->rtc); +} + +static const struct i2c_device_id nct3018y_id[] = { + { "nct3018y", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, nct3018y_id); + +static const struct of_device_id nct3018y_of_match[] = { + { .compatible = "nuvoton,nct3018y" }, + {} +}; +MODULE_DEVICE_TABLE(of, nct3018y_of_match); + +static struct i2c_driver nct3018y_driver = { + .driver = { + .name = "rtc-nct3018y", + .of_match_table = of_match_ptr(nct3018y_of_match), + }, + .probe = nct3018y_probe, + .id_table = nct3018y_id, +}; + +module_i2c_driver(nct3018y_driver); + +MODULE_AUTHOR("Medad CChien <ctcchien@nuvoton.com>"); +MODULE_AUTHOR("Mia Lin <mimi05633@gmail.com>"); +MODULE_DESCRIPTION("Nuvoton NCT3018Y RTC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c index b1b1943de844..6174b3fd4b98 100644 --- a/drivers/rtc/rtc-pcf8523.c +++ b/drivers/rtc/rtc-pcf8523.c @@ -390,8 +390,7 @@ static const struct regmap_config regmap_config = { .max_register = 0x13, }; -static int pcf8523_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int pcf8523_probe(struct i2c_client *client) { struct pcf8523 *pcf8523; struct rtc_device *rtc; @@ -485,7 +484,7 @@ static struct i2c_driver pcf8523_driver = { .name = "rtc-pcf8523", .of_match_table = pcf8523_of_match, }, - .probe = pcf8523_probe, + .probe_new = pcf8523_probe, .id_table = pcf8523_id, }; module_i2c_driver(pcf8523_driver); diff --git a/drivers/rtc/rtc-pcf85363.c b/drivers/rtc/rtc-pcf85363.c index bb3e9ba75f6c..c05b722f0060 100644 --- a/drivers/rtc/rtc-pcf85363.c +++ b/drivers/rtc/rtc-pcf85363.c @@ -350,8 +350,7 @@ static const struct pcf85x63_config pcf_85363_config = { .num_nvram = 2 }; -static int pcf85363_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int pcf85363_probe(struct i2c_client *client) { struct pcf85363 *pcf85363; const struct pcf85x63_config *config = &pcf_85363_config; @@ -436,7 +435,7 @@ static struct i2c_driver pcf85363_driver = { .name = "pcf85363", .of_match_table = of_match_ptr(dev_ids), }, - .probe = pcf85363_probe, + .probe_new = pcf85363_probe, }; module_i2c_driver(pcf85363_driver); diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index 9d06813e2e6d..11fa9788558b 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -509,8 +509,7 @@ static const struct rtc_class_ops pcf8563_rtc_ops = { .alarm_irq_enable = pcf8563_irq_enable, }; -static int pcf8563_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int pcf8563_probe(struct i2c_client *client) { struct pcf8563 *pcf8563; int err; @@ -606,7 +605,7 @@ static struct i2c_driver pcf8563_driver = { .name = "rtc-pcf8563", .of_match_table = of_match_ptr(pcf8563_of_match), }, - .probe = pcf8563_probe, + .probe_new = pcf8563_probe, .id_table = pcf8563_id, }; diff --git a/drivers/rtc/rtc-pcf8583.c b/drivers/rtc/rtc-pcf8583.c index c80ca20e5d8d..87074d178274 100644 --- a/drivers/rtc/rtc-pcf8583.c +++ b/drivers/rtc/rtc-pcf8583.c @@ -275,8 +275,7 @@ static const struct rtc_class_ops pcf8583_rtc_ops = { .set_time = pcf8583_rtc_set_time, }; -static int pcf8583_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int pcf8583_probe(struct i2c_client *client) { struct pcf8583 *pcf8583; @@ -307,7 +306,7 @@ static struct i2c_driver pcf8583_driver = { .driver = { .name = "pcf8583", }, - .probe = pcf8583_probe, + .probe_new = pcf8583_probe, .id_table = pcf8583_id, }; diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c index 8cb84c9595fc..eb483a30bd92 100644 --- a/drivers/rtc/rtc-rv3029c2.c +++ b/drivers/rtc/rtc-rv3029c2.c @@ -784,8 +784,7 @@ static const struct regmap_config config = { #if IS_ENABLED(CONFIG_I2C) -static int rv3029_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int rv3029_i2c_probe(struct i2c_client *client) { struct regmap *regmap; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK | @@ -819,7 +818,7 @@ static struct i2c_driver rv3029_driver = { .name = "rv3029", .of_match_table = of_match_ptr(rv3029_of_match), }, - .probe = rv3029_i2c_probe, + .probe_new = rv3029_i2c_probe, .id_table = rv3029_id, }; diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c index f69e0b1137cd..3527a0521e9b 100644 --- a/drivers/rtc/rtc-rv8803.c +++ b/drivers/rtc/rtc-rv8803.c @@ -9,6 +9,7 @@ #include <linux/bcd.h> #include <linux/bitops.h> +#include <linux/bitfield.h> #include <linux/log2.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -33,6 +34,7 @@ #define RV8803_EXT 0x0D #define RV8803_FLAG 0x0E #define RV8803_CTRL 0x0F +#define RV8803_OSC_OFFSET 0x2C #define RV8803_EXT_WADA BIT(6) @@ -49,12 +51,15 @@ #define RV8803_CTRL_TIE BIT(4) #define RV8803_CTRL_UIE BIT(5) +#define RX8803_CTRL_CSEL GENMASK(7, 6) + #define RX8900_BACKUP_CTRL 0x18 #define RX8900_FLAG_SWOFF BIT(2) #define RX8900_FLAG_VDETOFF BIT(3) enum rv8803_type { rv_8803, + rx_8803, rx_8804, rx_8900 }; @@ -64,6 +69,7 @@ struct rv8803_data { struct rtc_device *rtc; struct mutex flags_lock; u8 ctrl; + u8 backup; enum rv8803_type type; }; @@ -136,6 +142,44 @@ static int rv8803_write_regs(const struct i2c_client *client, return ret; } +static int rv8803_regs_init(struct rv8803_data *rv8803) +{ + int ret; + + ret = rv8803_write_reg(rv8803->client, RV8803_OSC_OFFSET, 0x00); + if (ret) + return ret; + + ret = rv8803_write_reg(rv8803->client, RV8803_CTRL, + FIELD_PREP(RX8803_CTRL_CSEL, 1)); /* 2s */ + if (ret) + return ret; + + ret = rv8803_write_regs(rv8803->client, RV8803_ALARM_MIN, 3, + (u8[]){ 0, 0, 0 }); + if (ret) + return ret; + + return rv8803_write_reg(rv8803->client, RV8803_RAM, 0x00); +} + +static int rv8803_regs_configure(struct rv8803_data *rv8803); + +static int rv8803_regs_reset(struct rv8803_data *rv8803) +{ + /* + * The RV-8803 resets all registers to POR defaults after voltage-loss, + * the Epson RTCs don't, so we manually reset the remainder here. + */ + if (rv8803->type == rx_8803 || rv8803->type == rx_8900) { + int ret = rv8803_regs_init(rv8803); + if (ret) + return ret; + } + + return rv8803_regs_configure(rv8803); +} + static irqreturn_t rv8803_handle_irq(int irq, void *dev_id) { struct i2c_client *client = dev_id; @@ -269,6 +313,14 @@ static int rv8803_set_time(struct device *dev, struct rtc_time *tm) return flags; } + if (flags & RV8803_FLAG_V2F) { + ret = rv8803_regs_reset(rv8803); + if (ret) { + mutex_unlock(&rv8803->flags_lock); + return ret; + } + } + ret = rv8803_write_reg(rv8803->client, RV8803_FLAG, flags & ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F)); @@ -498,18 +550,32 @@ static int rx8900_trickle_charger_init(struct rv8803_data *rv8803) if (err < 0) return err; - flags = ~(RX8900_FLAG_VDETOFF | RX8900_FLAG_SWOFF) & (u8)err; - - if (of_property_read_bool(node, "epson,vdet-disable")) - flags |= RX8900_FLAG_VDETOFF; - - if (of_property_read_bool(node, "trickle-diode-disable")) - flags |= RX8900_FLAG_SWOFF; + flags = (u8)err; + flags &= ~(RX8900_FLAG_VDETOFF | RX8900_FLAG_SWOFF); + flags |= rv8803->backup; return i2c_smbus_write_byte_data(rv8803->client, RX8900_BACKUP_CTRL, flags); } +/* configure registers with values different than the Power-On reset defaults */ +static int rv8803_regs_configure(struct rv8803_data *rv8803) +{ + int err; + + err = rv8803_write_reg(rv8803->client, RV8803_EXT, RV8803_EXT_WADA); + if (err) + return err; + + err = rx8900_trickle_charger_init(rv8803); + if (err) { + dev_err(&rv8803->client->dev, "failed to init charger\n"); + return err; + } + + return 0; +} + static int rv8803_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -576,15 +642,15 @@ static int rv8803_probe(struct i2c_client *client, if (!client->irq) clear_bit(RTC_FEATURE_ALARM, rv8803->rtc->features); - err = rv8803_write_reg(rv8803->client, RV8803_EXT, RV8803_EXT_WADA); - if (err) - return err; + if (of_property_read_bool(client->dev.of_node, "epson,vdet-disable")) + rv8803->backup |= RX8900_FLAG_VDETOFF; - err = rx8900_trickle_charger_init(rv8803); - if (err) { - dev_err(&client->dev, "failed to init charger\n"); + if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable")) + rv8803->backup |= RX8900_FLAG_SWOFF; + + err = rv8803_regs_configure(rv8803); + if (err) return err; - } rv8803->rtc->ops = &rv8803_rtc_ops; rv8803->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; @@ -603,7 +669,7 @@ static int rv8803_probe(struct i2c_client *client, static const struct i2c_device_id rv8803_id[] = { { "rv8803", rv_8803 }, { "rv8804", rx_8804 }, - { "rx8803", rv_8803 }, + { "rx8803", rx_8803 }, { "rx8900", rx_8900 }, { } }; @@ -616,7 +682,7 @@ static const __maybe_unused struct of_device_id rv8803_of_match[] = { }, { .compatible = "epson,rx8803", - .data = (void *)rv_8803 + .data = (void *)rx_8803 }, { .compatible = "epson,rx8804", diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c index 758fd6e11a15..cc634558b928 100644 --- a/drivers/rtc/rtc-rx6110.c +++ b/drivers/rtc/rtc-rx6110.c @@ -419,8 +419,7 @@ static struct regmap_config regmap_i2c_config = { .read_flag_mask = 0x80, }; -static int rx6110_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int rx6110_i2c_probe(struct i2c_client *client) { struct i2c_adapter *adapter = client->adapter; struct rx6110_data *rx6110; @@ -464,7 +463,7 @@ static struct i2c_driver rx6110_i2c_driver = { .name = RX6110_DRIVER_NAME, .acpi_match_table = rx6110_i2c_acpi_match, }, - .probe = rx6110_i2c_probe, + .probe_new = rx6110_i2c_probe, .id_table = rx6110_i2c_id, }; diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c index b32117ccd74b..dde86f3e2a4b 100644 --- a/drivers/rtc/rtc-rx8025.c +++ b/drivers/rtc/rtc-rx8025.c @@ -55,6 +55,8 @@ #define RX8025_BIT_CTRL2_XST BIT(5) #define RX8025_BIT_CTRL2_VDET BIT(6) +#define RX8035_BIT_HOUR_1224 BIT(7) + /* Clock precision adjustment */ #define RX8025_ADJ_RESOLUTION 3050 /* in ppb */ #define RX8025_ADJ_DATA_MAX 62 @@ -78,6 +80,7 @@ struct rx8025_data { struct rtc_device *rtc; enum rx_model model; u8 ctrl1; + int is_24; }; static s32 rx8025_read_reg(const struct i2c_client *client, u8 number) @@ -226,7 +229,7 @@ static int rx8025_get_time(struct device *dev, struct rtc_time *dt) dt->tm_sec = bcd2bin(date[RX8025_REG_SEC] & 0x7f); dt->tm_min = bcd2bin(date[RX8025_REG_MIN] & 0x7f); - if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224) + if (rx8025->is_24) dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x3f); else dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x1f) % 12 @@ -254,7 +257,7 @@ static int rx8025_set_time(struct device *dev, struct rtc_time *dt) */ date[RX8025_REG_SEC] = bin2bcd(dt->tm_sec); date[RX8025_REG_MIN] = bin2bcd(dt->tm_min); - if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224) + if (rx8025->is_24) date[RX8025_REG_HOUR] = bin2bcd(dt->tm_hour); else date[RX8025_REG_HOUR] = (dt->tm_hour >= 12 ? 0x20 : 0) @@ -279,6 +282,7 @@ static int rx8025_init_client(struct i2c_client *client) struct rx8025_data *rx8025 = i2c_get_clientdata(client); u8 ctrl[2], ctrl2; int need_clear = 0; + int hour_reg; int err; err = rx8025_read_regs(client, RX8025_REG_CTRL1, 2, ctrl); @@ -303,6 +307,16 @@ static int rx8025_init_client(struct i2c_client *client) err = rx8025_write_reg(client, RX8025_REG_CTRL2, ctrl2); } + + if (rx8025->model == model_rx_8035) { + /* In RX-8035, 12/24 flag is in the hour register */ + hour_reg = rx8025_read_reg(client, RX8025_REG_HOUR); + if (hour_reg < 0) + return hour_reg; + rx8025->is_24 = (hour_reg & RX8035_BIT_HOUR_1224); + } else { + rx8025->is_24 = (ctrl[1] & RX8025_BIT_CTRL1_1224); + } out: return err; } @@ -329,7 +343,7 @@ static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t) /* Hardware alarms precision is 1 minute! */ t->time.tm_sec = 0; t->time.tm_min = bcd2bin(ald[0] & 0x7f); - if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224) + if (rx8025->is_24) t->time.tm_hour = bcd2bin(ald[1] & 0x3f); else t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12 @@ -350,7 +364,7 @@ static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t) int err; ald[0] = bin2bcd(t->time.tm_min); - if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224) + if (rx8025->is_24) ald[1] = bin2bcd(t->time.tm_hour); else ald[1] = (t->time.tm_hour >= 12 ? 0x20 : 0) diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c index aed4898a0ff4..14edb7534c97 100644 --- a/drivers/rtc/rtc-rx8581.c +++ b/drivers/rtc/rtc-rx8581.c @@ -248,8 +248,7 @@ static const struct rx85x1_config rx8571_config = { .num_nvram = 2 }; -static int rx8581_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int rx8581_probe(struct i2c_client *client) { struct rx8581 *rx8581; const struct rx85x1_config *config = &rx8581_config; @@ -326,7 +325,7 @@ static struct i2c_driver rx8581_driver = { .name = "rtc-rx8581", .of_match_table = of_match_ptr(rx8581_of_match), }, - .probe = rx8581_probe, + .probe_new = rx8581_probe, .id_table = rx8581_id, }; diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c index 26278c770731..81d97b1d3159 100644 --- a/drivers/rtc/rtc-s35390a.c +++ b/drivers/rtc/rtc-s35390a.c @@ -420,8 +420,7 @@ static const struct rtc_class_ops s35390a_rtc_ops = { .ioctl = s35390a_rtc_ioctl, }; -static int s35390a_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int s35390a_probe(struct i2c_client *client) { int err, err_read; unsigned int i; @@ -502,7 +501,7 @@ static struct i2c_driver s35390a_driver = { .name = "rtc-s35390a", .of_match_table = of_match_ptr(s35390a_of_match), }, - .probe = s35390a_probe, + .probe_new = s35390a_probe, .id_table = s35390a_id, }; diff --git a/drivers/rtc/rtc-sd3078.c b/drivers/rtc/rtc-sd3078.c index 24e8528e23ec..e2f90d768ca8 100644 --- a/drivers/rtc/rtc-sd3078.c +++ b/drivers/rtc/rtc-sd3078.c @@ -163,8 +163,7 @@ static const struct regmap_config regmap_config = { .max_register = 0x11, }; -static int sd3078_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int sd3078_probe(struct i2c_client *client) { int ret; struct sd3078 *sd3078; @@ -218,7 +217,7 @@ static struct i2c_driver sd3078_driver = { .name = "sd3078", .of_match_table = of_match_ptr(rtc_dt_match), }, - .probe = sd3078_probe, + .probe_new = sd3078_probe, .id_table = sd3078_id, }; diff --git a/drivers/rtc/rtc-spear.c b/drivers/rtc/rtc-spear.c index d4777b01ab22..736fe535cd45 100644 --- a/drivers/rtc/rtc-spear.c +++ b/drivers/rtc/rtc-spear.c @@ -388,7 +388,7 @@ static int spear_rtc_probe(struct platform_device *pdev) config->rtc->ops = &spear_rtc_ops; config->rtc->range_min = RTC_TIMESTAMP_BEGIN_0000; - config->rtc->range_min = RTC_TIMESTAMP_END_9999; + config->rtc->range_max = RTC_TIMESTAMP_END_9999; status = devm_rtc_register_device(config->rtc); if (status) diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c index 57540727ce1c..ed5516089e9a 100644 --- a/drivers/rtc/rtc-sun6i.c +++ b/drivers/rtc/rtc-sun6i.c @@ -875,6 +875,8 @@ static const struct of_device_id sun6i_rtc_dt_ids[] = { { .compatible = "allwinner,sun50i-h6-rtc" }, { .compatible = "allwinner,sun50i-h616-rtc", .data = (void *)RTC_LINEAR_DAY }, + { .compatible = "allwinner,sun50i-r329-rtc", + .data = (void *)RTC_LINEAR_DAY }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids); diff --git a/drivers/rtc/rtc-ti-k3.c b/drivers/rtc/rtc-ti-k3.c new file mode 100644 index 000000000000..7a0f181d3fef --- /dev/null +++ b/drivers/rtc/rtc-ti-k3.c @@ -0,0 +1,680 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Texas Instruments K3 RTC driver + * + * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/rtc.h> + +/* Registers */ +#define REG_K3RTC_S_CNT_LSW 0x08 +#define REG_K3RTC_S_CNT_MSW 0x0c +#define REG_K3RTC_COMP 0x10 +#define REG_K3RTC_ON_OFF_S_CNT_LSW 0x20 +#define REG_K3RTC_ON_OFF_S_CNT_MSW 0x24 +#define REG_K3RTC_SCRATCH0 0x30 +#define REG_K3RTC_SCRATCH7 0x4c +#define REG_K3RTC_GENERAL_CTL 0x50 +#define REG_K3RTC_IRQSTATUS_RAW_SYS 0x54 +#define REG_K3RTC_IRQSTATUS_SYS 0x58 +#define REG_K3RTC_IRQENABLE_SET_SYS 0x5c +#define REG_K3RTC_IRQENABLE_CLR_SYS 0x60 +#define REG_K3RTC_SYNCPEND 0x68 +#define REG_K3RTC_KICK0 0x70 +#define REG_K3RTC_KICK1 0x74 + +/* Freeze when lsw is read and unfreeze when msw is read */ +#define K3RTC_CNT_FMODE_S_CNT_VALUE (0x2 << 24) + +/* Magic values for lock/unlock */ +#define K3RTC_KICK0_UNLOCK_VALUE 0x83e70b13 +#define K3RTC_KICK1_UNLOCK_VALUE 0x95a4f1e0 + +/* Multiplier for ppb conversions */ +#define K3RTC_PPB_MULT (1000000000LL) +/* Min and max values supported with 'offset' interface (swapped sign) */ +#define K3RTC_MIN_OFFSET (-277761) +#define K3RTC_MAX_OFFSET (277778) + +/** + * struct ti_k3_rtc_soc_data - Private of compatible data for ti-k3-rtc + * @unlock_irq_erratum: Has erratum for unlock infinite IRQs (erratum i2327) + */ +struct ti_k3_rtc_soc_data { + const bool unlock_irq_erratum; +}; + +static const struct regmap_config ti_k3_rtc_regmap_config = { + .name = "peripheral-registers", + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = REG_K3RTC_KICK1, +}; + +enum ti_k3_rtc_fields { + K3RTC_KICK0, + K3RTC_KICK1, + K3RTC_S_CNT_LSW, + K3RTC_S_CNT_MSW, + K3RTC_O32K_OSC_DEP_EN, + K3RTC_UNLOCK, + K3RTC_CNT_FMODE, + K3RTC_PEND, + K3RTC_RELOAD_FROM_BBD, + K3RTC_COMP, + + K3RTC_ALM_S_CNT_LSW, + K3RTC_ALM_S_CNT_MSW, + K3RTC_IRQ_STATUS_RAW, + K3RTC_IRQ_STATUS, + K3RTC_IRQ_ENABLE_SET, + K3RTC_IRQ_ENABLE_CLR, + + K3RTC_IRQ_STATUS_ALT, + K3RTC_IRQ_ENABLE_CLR_ALT, + + K3_RTC_MAX_FIELDS +}; + +static const struct reg_field ti_rtc_reg_fields[] = { + [K3RTC_KICK0] = REG_FIELD(REG_K3RTC_KICK0, 0, 31), + [K3RTC_KICK1] = REG_FIELD(REG_K3RTC_KICK1, 0, 31), + [K3RTC_S_CNT_LSW] = REG_FIELD(REG_K3RTC_S_CNT_LSW, 0, 31), + [K3RTC_S_CNT_MSW] = REG_FIELD(REG_K3RTC_S_CNT_MSW, 0, 15), + [K3RTC_O32K_OSC_DEP_EN] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 21, 21), + [K3RTC_UNLOCK] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 23, 23), + [K3RTC_CNT_FMODE] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 24, 25), + [K3RTC_PEND] = REG_FIELD(REG_K3RTC_SYNCPEND, 0, 1), + [K3RTC_RELOAD_FROM_BBD] = REG_FIELD(REG_K3RTC_SYNCPEND, 31, 31), + [K3RTC_COMP] = REG_FIELD(REG_K3RTC_COMP, 0, 31), + + /* We use on to off as alarm trigger */ + [K3RTC_ALM_S_CNT_LSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_LSW, 0, 31), + [K3RTC_ALM_S_CNT_MSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_MSW, 0, 15), + [K3RTC_IRQ_STATUS_RAW] = REG_FIELD(REG_K3RTC_IRQSTATUS_RAW_SYS, 0, 0), + [K3RTC_IRQ_STATUS] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 0, 0), + [K3RTC_IRQ_ENABLE_SET] = REG_FIELD(REG_K3RTC_IRQENABLE_SET_SYS, 0, 0), + [K3RTC_IRQ_ENABLE_CLR] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 0, 0), + /* Off to on is alternate */ + [K3RTC_IRQ_STATUS_ALT] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 1, 1), + [K3RTC_IRQ_ENABLE_CLR_ALT] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 1, 1), +}; + +/** + * struct ti_k3_rtc - Private data for ti-k3-rtc + * @irq: IRQ + * @sync_timeout_us: data sync timeout period in uSec + * @rate_32k: 32k clock rate in Hz + * @rtc_dev: rtc device + * @regmap: rtc mmio regmap + * @r_fields: rtc register fields + * @soc: SoC compatible match data + */ +struct ti_k3_rtc { + unsigned int irq; + u32 sync_timeout_us; + unsigned long rate_32k; + struct rtc_device *rtc_dev; + struct regmap *regmap; + struct regmap_field *r_fields[K3_RTC_MAX_FIELDS]; + const struct ti_k3_rtc_soc_data *soc; +}; + +static int k3rtc_field_read(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f) +{ + int ret; + int val; + + ret = regmap_field_read(priv->r_fields[f], &val); + /* + * We shouldn't be seeing regmap fail on us for mmio reads + * This is possible if clock context fails, but that isn't the case for us + */ + if (WARN_ON_ONCE(ret)) + return ret; + return val; +} + +static void k3rtc_field_write(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f, u32 val) +{ + regmap_field_write(priv->r_fields[f], val); +} + +/** + * k3rtc_fence - Ensure a register sync took place between the two domains + * @priv: pointer to priv data + * + * Return: 0 if the sync took place, else returns -ETIMEDOUT + */ +static int k3rtc_fence(struct ti_k3_rtc *priv) +{ + int ret; + + ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_PEND], ret, + !ret, 2, priv->sync_timeout_us); + + return ret; +} + +static inline int k3rtc_check_unlocked(struct ti_k3_rtc *priv) +{ + int ret; + + ret = k3rtc_field_read(priv, K3RTC_UNLOCK); + if (ret < 0) + return ret; + + return (ret) ? 0 : 1; +} + +static int k3rtc_unlock_rtc(struct ti_k3_rtc *priv) +{ + int ret; + + ret = k3rtc_check_unlocked(priv); + if (!ret) + return ret; + + k3rtc_field_write(priv, K3RTC_KICK0, K3RTC_KICK0_UNLOCK_VALUE); + k3rtc_field_write(priv, K3RTC_KICK1, K3RTC_KICK1_UNLOCK_VALUE); + + /* Skip fence since we are going to check the unlock bit as fence */ + ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_UNLOCK], ret, + !ret, 2, priv->sync_timeout_us); + + return ret; +} + +static int k3rtc_configure(struct device *dev) +{ + int ret; + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + + /* + * HWBUG: The compare state machine is broken if the RTC module + * is NOT unlocked in under one second of boot - which is pretty long + * time from the perspective of Linux driver (module load, u-boot + * shell all can take much longer than this. + * + * In such occurrence, it is assumed that the RTC module is unusable + */ + if (priv->soc->unlock_irq_erratum) { + ret = k3rtc_check_unlocked(priv); + /* If there is an error OR if we are locked, return error */ + if (ret) { + dev_err(dev, + HW_ERR "Erratum i2327 unlock QUIRK! Cannot operate!!\n"); + return -EFAULT; + } + } else { + /* May need to explicitly unlock first time */ + ret = k3rtc_unlock_rtc(priv); + if (ret) { + dev_err(dev, "Failed to unlock(%d)!\n", ret); + return ret; + } + } + + /* Enable Shadow register sync on 32k clock boundary */ + k3rtc_field_write(priv, K3RTC_O32K_OSC_DEP_EN, 0x1); + + /* + * Wait at least clock sync time before proceeding further programming. + * This ensures that the 32k based sync is active. + */ + usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 5); + + /* We need to ensure fence here to make sure sync here */ + ret = k3rtc_fence(priv); + if (ret) { + dev_err(dev, + "Failed fence osc_dep enable(%d) - is 32k clk working?!\n", ret); + return ret; + } + + /* + * FMODE setting: Reading lower seconds will freeze value on higher + * seconds. This also implies that we must *ALWAYS* read lower seconds + * prior to reading higher seconds + */ + k3rtc_field_write(priv, K3RTC_CNT_FMODE, K3RTC_CNT_FMODE_S_CNT_VALUE); + + /* Clear any spurious IRQ sources if any */ + k3rtc_field_write(priv, K3RTC_IRQ_STATUS_ALT, 0x1); + k3rtc_field_write(priv, K3RTC_IRQ_STATUS, 0x1); + /* Disable all IRQs */ + k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR_ALT, 0x1); + k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR, 0x1); + + /* And.. Let us Sync the writes in */ + return k3rtc_fence(priv); +} + +static int ti_k3_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 seconds_lo, seconds_hi; + + seconds_lo = k3rtc_field_read(priv, K3RTC_S_CNT_LSW); + seconds_hi = k3rtc_field_read(priv, K3RTC_S_CNT_MSW); + + rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, tm); + + return 0; +} + +static int ti_k3_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + time64_t seconds; + + seconds = rtc_tm_to_time64(tm); + + /* + * Read operation on LSW will freeze the RTC, so to update + * the time, we cannot use field operations. Just write since the + * reserved bits are ignored. + */ + regmap_write(priv->regmap, REG_K3RTC_S_CNT_LSW, seconds); + regmap_write(priv->regmap, REG_K3RTC_S_CNT_MSW, seconds >> 32); + + return k3rtc_fence(priv); +} + +static int ti_k3_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 reg; + u32 offset = enabled ? K3RTC_IRQ_ENABLE_SET : K3RTC_IRQ_ENABLE_CLR; + + reg = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET); + if ((enabled && reg) || (!enabled && !reg)) + return 0; + + k3rtc_field_write(priv, offset, 0x1); + + /* + * Ensure the write sync is through - NOTE: it should be OK to have + * ISR to fire as we are checking sync (which should be done in a 32k + * cycle or so). + */ + return k3rtc_fence(priv); +} + +static int ti_k3_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 seconds_lo, seconds_hi; + + seconds_lo = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_LSW); + seconds_hi = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_MSW); + + rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, &alarm->time); + + alarm->enabled = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET); + + return 0; +} + +static int ti_k3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + time64_t seconds; + int ret; + + seconds = rtc_tm_to_time64(&alarm->time); + + k3rtc_field_write(priv, K3RTC_ALM_S_CNT_LSW, seconds); + k3rtc_field_write(priv, K3RTC_ALM_S_CNT_MSW, (seconds >> 32)); + + /* Make sure the alarm time is synced in */ + ret = k3rtc_fence(priv); + if (ret) { + dev_err(dev, "Failed to fence(%d)! Potential config issue?\n", ret); + return ret; + } + + /* Alarm IRQ enable will do a sync */ + return ti_k3_rtc_alarm_irq_enable(dev, alarm->enabled); +} + +static int ti_k3_rtc_read_offset(struct device *dev, long *offset) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 ticks_per_hr = priv->rate_32k * 3600; + int comp; + s64 tmp; + + comp = k3rtc_field_read(priv, K3RTC_COMP); + + /* Convert from RTC calibration register format to ppb format */ + tmp = comp * (s64)K3RTC_PPB_MULT; + if (tmp < 0) + tmp -= ticks_per_hr / 2LL; + else + tmp += ticks_per_hr / 2LL; + tmp = div_s64(tmp, ticks_per_hr); + + /* Offset value operates in negative way, so swap sign */ + *offset = (long)-tmp; + + return 0; +} + +static int ti_k3_rtc_set_offset(struct device *dev, long offset) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 ticks_per_hr = priv->rate_32k * 3600; + int comp; + s64 tmp; + + /* Make sure offset value is within supported range */ + if (offset < K3RTC_MIN_OFFSET || offset > K3RTC_MAX_OFFSET) + return -ERANGE; + + /* Convert from ppb format to RTC calibration register format */ + tmp = offset * (s64)ticks_per_hr; + if (tmp < 0) + tmp -= K3RTC_PPB_MULT / 2LL; + else + tmp += K3RTC_PPB_MULT / 2LL; + tmp = div_s64(tmp, K3RTC_PPB_MULT); + + /* Offset value operates in negative way, so swap sign */ + comp = (int)-tmp; + + k3rtc_field_write(priv, K3RTC_COMP, comp); + + return k3rtc_fence(priv); +} + +static irqreturn_t ti_k3_rtc_interrupt(s32 irq, void *dev_id) +{ + struct device *dev = dev_id; + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 reg; + int ret; + + /* + * IRQ assertion can be very fast, however, the IRQ Status clear + * de-assert depends on 32k clock edge in the 32k domain + * If we clear the status prior to the first 32k clock edge, + * the status bit is cleared, but the IRQ stays re-asserted. + * + * To prevent this condition, we need to wait for clock sync time. + * We can either do that by polling the 32k observability signal for + * a toggle OR we could just sleep and let the processor do other + * stuff. + */ + usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 2); + + /* Lets make sure that this is a valid interrupt */ + reg = k3rtc_field_read(priv, K3RTC_IRQ_STATUS); + + if (!reg) { + u32 raw = k3rtc_field_read(priv, K3RTC_IRQ_STATUS_RAW); + + dev_err(dev, + HW_ERR + "Erratum i2327/IRQ trig: status: 0x%08x / 0x%08x\n", reg, raw); + return IRQ_NONE; + } + + /* + * Write 1 to clear status reg + * We cannot use a field operation here due to a potential race between + * 32k domain and vbus domain. + */ + regmap_write(priv->regmap, REG_K3RTC_IRQSTATUS_SYS, 0x1); + + /* Sync the write in */ + ret = k3rtc_fence(priv); + if (ret) { + dev_err(dev, "Failed to fence irq status clr(%d)!\n", ret); + return IRQ_NONE; + } + + /* + * Force the 32k status to be reloaded back in to ensure status is + * reflected back correctly. + */ + k3rtc_field_write(priv, K3RTC_RELOAD_FROM_BBD, 0x1); + + /* Ensure the write sync is through */ + ret = k3rtc_fence(priv); + if (ret) { + dev_err(dev, "Failed to fence reload from bbd(%d)!\n", ret); + return IRQ_NONE; + } + + /* Now we ensure that the status bit is cleared */ + ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_IRQ_STATUS], + ret, !ret, 2, priv->sync_timeout_us); + if (ret) { + dev_err(dev, "Time out waiting for status clear\n"); + return IRQ_NONE; + } + + /* Notify RTC core on event */ + rtc_update_irq(priv->rtc_dev, 1, RTC_IRQF | RTC_AF); + + return IRQ_HANDLED; +} + +static const struct rtc_class_ops ti_k3_rtc_ops = { + .read_time = ti_k3_rtc_read_time, + .set_time = ti_k3_rtc_set_time, + .read_alarm = ti_k3_rtc_read_alarm, + .set_alarm = ti_k3_rtc_set_alarm, + .read_offset = ti_k3_rtc_read_offset, + .set_offset = ti_k3_rtc_set_offset, + .alarm_irq_enable = ti_k3_rtc_alarm_irq_enable, +}; + +static int ti_k3_rtc_scratch_read(void *priv_data, unsigned int offset, + void *val, size_t bytes) +{ + struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data; + + return regmap_bulk_read(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4); +} + +static int ti_k3_rtc_scratch_write(void *priv_data, unsigned int offset, + void *val, size_t bytes) +{ + struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data; + int ret; + + ret = regmap_bulk_write(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4); + if (ret) + return ret; + + return k3rtc_fence(priv); +} + +static struct nvmem_config ti_k3_rtc_nvmem_config = { + .name = "ti_k3_rtc_scratch", + .word_size = 4, + .stride = 4, + .size = REG_K3RTC_SCRATCH7 - REG_K3RTC_SCRATCH0 + 4, + .reg_read = ti_k3_rtc_scratch_read, + .reg_write = ti_k3_rtc_scratch_write, +}; + +static int k3rtc_get_32kclk(struct device *dev, struct ti_k3_rtc *priv) +{ + int ret; + struct clk *clk; + + clk = devm_clk_get(dev, "osc32k"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, (void (*)(void *))clk_disable_unprepare, clk); + if (ret) + return ret; + + priv->rate_32k = clk_get_rate(clk); + + /* Make sure we are exact 32k clock. Else, try to compensate delay */ + if (priv->rate_32k != 32768) + dev_warn(dev, "Clock rate %ld is not 32768! Could misbehave!\n", + priv->rate_32k); + + /* + * Sync timeout should be two 32k clk sync cycles = ~61uS. We double + * it to comprehend intermediate bus segment and cpu frequency + * deltas + */ + priv->sync_timeout_us = (u32)(DIV_ROUND_UP_ULL(1000000, priv->rate_32k) * 4); + + return ret; +} + +static int k3rtc_get_vbusclk(struct device *dev, struct ti_k3_rtc *priv) +{ + int ret; + struct clk *clk; + + /* Note: VBUS isn't a context clock, it is needed for hardware operation */ + clk = devm_clk_get(dev, "vbus"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + return devm_add_action_or_reset(dev, (void (*)(void *))clk_disable_unprepare, clk); +} + +static int ti_k3_rtc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ti_k3_rtc *priv; + void __iomem *rtc_base; + int ret; + + priv = devm_kzalloc(dev, sizeof(struct ti_k3_rtc), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + rtc_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(rtc_base)) + return PTR_ERR(rtc_base); + + priv->regmap = devm_regmap_init_mmio(dev, rtc_base, &ti_k3_rtc_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + ret = devm_regmap_field_bulk_alloc(dev, priv->regmap, priv->r_fields, + ti_rtc_reg_fields, K3_RTC_MAX_FIELDS); + if (ret) + return ret; + + ret = k3rtc_get_32kclk(dev, priv); + if (ret) + return ret; + ret = k3rtc_get_vbusclk(dev, priv); + if (ret) + return ret; + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + priv->irq = (unsigned int)ret; + + priv->rtc_dev = devm_rtc_allocate_device(dev); + if (IS_ERR(priv->rtc_dev)) + return PTR_ERR(priv->rtc_dev); + + priv->soc = of_device_get_match_data(dev); + + priv->rtc_dev->ops = &ti_k3_rtc_ops; + priv->rtc_dev->range_max = (1ULL << 48) - 1; /* 48Bit seconds */ + ti_k3_rtc_nvmem_config.priv = priv; + + ret = devm_request_threaded_irq(dev, priv->irq, NULL, + ti_k3_rtc_interrupt, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + dev_name(dev), dev); + if (ret) { + dev_err(dev, "Could not request IRQ: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, priv); + + ret = k3rtc_configure(dev); + if (ret) + return ret; + + if (device_property_present(dev, "wakeup-source")) + device_init_wakeup(dev, true); + else + device_set_wakeup_capable(dev, true); + + ret = devm_rtc_register_device(priv->rtc_dev); + if (ret) + return ret; + + return devm_rtc_nvmem_register(priv->rtc_dev, &ti_k3_rtc_nvmem_config); +} + +static const struct ti_k3_rtc_soc_data ti_k3_am62_data = { + .unlock_irq_erratum = true, +}; + +static const struct of_device_id ti_k3_rtc_of_match_table[] = { + {.compatible = "ti,am62-rtc", .data = &ti_k3_am62_data}, + {} +}; +MODULE_DEVICE_TABLE(of, ti_k3_rtc_of_match_table); + +static int __maybe_unused ti_k3_rtc_suspend(struct device *dev) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(priv->irq); + return 0; +} + +static int __maybe_unused ti_k3_rtc_resume(struct device *dev) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(priv->irq); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ti_k3_rtc_pm_ops, ti_k3_rtc_suspend, ti_k3_rtc_resume); + +static struct platform_driver ti_k3_rtc_driver = { + .probe = ti_k3_rtc_probe, + .driver = { + .name = "rtc-ti-k3", + .of_match_table = ti_k3_rtc_of_match_table, + .pm = &ti_k3_rtc_pm_ops, + }, +}; +module_platform_driver(ti_k3_rtc_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TI K3 RTC driver"); +MODULE_AUTHOR("Nishanth Menon"); diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c deleted file mode 100644 index 5a9f9ad86d32..000000000000 --- a/drivers/rtc/rtc-vr41xx.c +++ /dev/null @@ -1,363 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Driver for NEC VR4100 series Real Time Clock unit. - * - * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org> - */ -#include <linux/compat.h> -#include <linux/err.h> -#include <linux/fs.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/rtc.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/uaccess.h> -#include <linux/log2.h> - -#include <asm/div64.h> - -MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); -MODULE_DESCRIPTION("NEC VR4100 series RTC driver"); -MODULE_LICENSE("GPL v2"); - -/* RTC 1 registers */ -#define ETIMELREG 0x00 -#define ETIMEMREG 0x02 -#define ETIMEHREG 0x04 -/* RFU */ -#define ECMPLREG 0x08 -#define ECMPMREG 0x0a -#define ECMPHREG 0x0c -/* RFU */ -#define RTCL1LREG 0x10 -#define RTCL1HREG 0x12 -#define RTCL1CNTLREG 0x14 -#define RTCL1CNTHREG 0x16 -#define RTCL2LREG 0x18 -#define RTCL2HREG 0x1a -#define RTCL2CNTLREG 0x1c -#define RTCL2CNTHREG 0x1e - -/* RTC 2 registers */ -#define TCLKLREG 0x00 -#define TCLKHREG 0x02 -#define TCLKCNTLREG 0x04 -#define TCLKCNTHREG 0x06 -/* RFU */ -#define RTCINTREG 0x1e - #define TCLOCK_INT 0x08 - #define RTCLONG2_INT 0x04 - #define RTCLONG1_INT 0x02 - #define ELAPSEDTIME_INT 0x01 - -#define RTC_FREQUENCY 32768 -#define MAX_PERIODIC_RATE 6553 - -static void __iomem *rtc1_base; -static void __iomem *rtc2_base; - -#define rtc1_read(offset) readw(rtc1_base + (offset)) -#define rtc1_write(offset, value) writew((value), rtc1_base + (offset)) - -#define rtc2_read(offset) readw(rtc2_base + (offset)) -#define rtc2_write(offset, value) writew((value), rtc2_base + (offset)) - -/* 32-bit compat for ioctls that nobody else uses */ -#define RTC_EPOCH_READ32 _IOR('p', 0x0d, __u32) - -static unsigned long epoch = 1970; /* Jan 1 1970 00:00:00 */ - -static DEFINE_SPINLOCK(rtc_lock); -static char rtc_name[] = "RTC"; -static unsigned long periodic_count; -static unsigned int alarm_enabled; -static int aie_irq; -static int pie_irq; - -static inline time64_t read_elapsed_second(void) -{ - - unsigned long first_low, first_mid, first_high; - - unsigned long second_low, second_mid, second_high; - - do { - first_low = rtc1_read(ETIMELREG); - first_mid = rtc1_read(ETIMEMREG); - first_high = rtc1_read(ETIMEHREG); - second_low = rtc1_read(ETIMELREG); - second_mid = rtc1_read(ETIMEMREG); - second_high = rtc1_read(ETIMEHREG); - } while (first_low != second_low || first_mid != second_mid || - first_high != second_high); - - return ((u64)first_high << 17) | (first_mid << 1) | (first_low >> 15); -} - -static inline void write_elapsed_second(time64_t sec) -{ - spin_lock_irq(&rtc_lock); - - rtc1_write(ETIMELREG, (uint16_t)(sec << 15)); - rtc1_write(ETIMEMREG, (uint16_t)(sec >> 1)); - rtc1_write(ETIMEHREG, (uint16_t)(sec >> 17)); - - spin_unlock_irq(&rtc_lock); -} - -static int vr41xx_rtc_read_time(struct device *dev, struct rtc_time *time) -{ - time64_t epoch_sec, elapsed_sec; - - epoch_sec = mktime64(epoch, 1, 1, 0, 0, 0); - elapsed_sec = read_elapsed_second(); - - rtc_time64_to_tm(epoch_sec + elapsed_sec, time); - - return 0; -} - -static int vr41xx_rtc_set_time(struct device *dev, struct rtc_time *time) -{ - time64_t epoch_sec, current_sec; - - epoch_sec = mktime64(epoch, 1, 1, 0, 0, 0); - current_sec = rtc_tm_to_time64(time); - - write_elapsed_second(current_sec - epoch_sec); - - return 0; -} - -static int vr41xx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm) -{ - unsigned long low, mid, high; - struct rtc_time *time = &wkalrm->time; - - spin_lock_irq(&rtc_lock); - - low = rtc1_read(ECMPLREG); - mid = rtc1_read(ECMPMREG); - high = rtc1_read(ECMPHREG); - wkalrm->enabled = alarm_enabled; - - spin_unlock_irq(&rtc_lock); - - rtc_time64_to_tm((high << 17) | (mid << 1) | (low >> 15), time); - - return 0; -} - -static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm) -{ - time64_t alarm_sec; - - alarm_sec = rtc_tm_to_time64(&wkalrm->time); - - spin_lock_irq(&rtc_lock); - - if (alarm_enabled) - disable_irq(aie_irq); - - rtc1_write(ECMPLREG, (uint16_t)(alarm_sec << 15)); - rtc1_write(ECMPMREG, (uint16_t)(alarm_sec >> 1)); - rtc1_write(ECMPHREG, (uint16_t)(alarm_sec >> 17)); - - if (wkalrm->enabled) - enable_irq(aie_irq); - - alarm_enabled = wkalrm->enabled; - - spin_unlock_irq(&rtc_lock); - - return 0; -} - -static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) -{ - switch (cmd) { - case RTC_EPOCH_READ: - return put_user(epoch, (unsigned long __user *)arg); -#ifdef CONFIG_64BIT - case RTC_EPOCH_READ32: - return put_user(epoch, (unsigned int __user *)arg); -#endif - case RTC_EPOCH_SET: - /* Doesn't support before 1900 */ - if (arg < 1900) - return -EINVAL; - epoch = arg; - break; - default: - return -ENOIOCTLCMD; - } - - return 0; -} - -static int vr41xx_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) -{ - spin_lock_irq(&rtc_lock); - if (enabled) { - if (!alarm_enabled) { - enable_irq(aie_irq); - alarm_enabled = 1; - } - } else { - if (alarm_enabled) { - disable_irq(aie_irq); - alarm_enabled = 0; - } - } - spin_unlock_irq(&rtc_lock); - return 0; -} - -static irqreturn_t elapsedtime_interrupt(int irq, void *dev_id) -{ - struct platform_device *pdev = (struct platform_device *)dev_id; - struct rtc_device *rtc = platform_get_drvdata(pdev); - - rtc2_write(RTCINTREG, ELAPSEDTIME_INT); - - rtc_update_irq(rtc, 1, RTC_AF); - - return IRQ_HANDLED; -} - -static irqreturn_t rtclong1_interrupt(int irq, void *dev_id) -{ - struct platform_device *pdev = (struct platform_device *)dev_id; - struct rtc_device *rtc = platform_get_drvdata(pdev); - unsigned long count = periodic_count; - - rtc2_write(RTCINTREG, RTCLONG1_INT); - - rtc1_write(RTCL1LREG, count); - rtc1_write(RTCL1HREG, count >> 16); - - rtc_update_irq(rtc, 1, RTC_PF); - - return IRQ_HANDLED; -} - -static const struct rtc_class_ops vr41xx_rtc_ops = { - .ioctl = vr41xx_rtc_ioctl, - .read_time = vr41xx_rtc_read_time, - .set_time = vr41xx_rtc_set_time, - .read_alarm = vr41xx_rtc_read_alarm, - .set_alarm = vr41xx_rtc_set_alarm, - .alarm_irq_enable = vr41xx_rtc_alarm_irq_enable, -}; - -static int rtc_probe(struct platform_device *pdev) -{ - struct resource *res; - struct rtc_device *rtc; - int retval; - - if (pdev->num_resources != 4) - return -EBUSY; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EBUSY; - - rtc1_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (!rtc1_base) - return -EBUSY; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - retval = -EBUSY; - goto err_rtc1_iounmap; - } - - rtc2_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (!rtc2_base) { - retval = -EBUSY; - goto err_rtc1_iounmap; - } - - rtc = devm_rtc_allocate_device(&pdev->dev); - if (IS_ERR(rtc)) { - retval = PTR_ERR(rtc); - goto err_iounmap_all; - } - - rtc->ops = &vr41xx_rtc_ops; - - /* 48-bit counter at 32.768 kHz */ - rtc->range_max = (1ULL << 33) - 1; - rtc->max_user_freq = MAX_PERIODIC_RATE; - - spin_lock_irq(&rtc_lock); - - rtc1_write(ECMPLREG, 0); - rtc1_write(ECMPMREG, 0); - rtc1_write(ECMPHREG, 0); - rtc1_write(RTCL1LREG, 0); - rtc1_write(RTCL1HREG, 0); - - spin_unlock_irq(&rtc_lock); - - aie_irq = platform_get_irq(pdev, 0); - if (aie_irq <= 0) { - retval = -EBUSY; - goto err_iounmap_all; - } - - retval = devm_request_irq(&pdev->dev, aie_irq, elapsedtime_interrupt, 0, - "elapsed_time", pdev); - if (retval < 0) - goto err_iounmap_all; - - pie_irq = platform_get_irq(pdev, 1); - if (pie_irq <= 0) { - retval = -EBUSY; - goto err_iounmap_all; - } - - retval = devm_request_irq(&pdev->dev, pie_irq, rtclong1_interrupt, 0, - "rtclong1", pdev); - if (retval < 0) - goto err_iounmap_all; - - platform_set_drvdata(pdev, rtc); - - disable_irq(aie_irq); - disable_irq(pie_irq); - - dev_info(&pdev->dev, "Real Time Clock of NEC VR4100 series\n"); - - retval = devm_rtc_register_device(rtc); - if (retval) - goto err_iounmap_all; - - return 0; - -err_iounmap_all: - rtc2_base = NULL; - -err_rtc1_iounmap: - rtc1_base = NULL; - - return retval; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:RTC"); - -static struct platform_driver rtc_platform_driver = { - .probe = rtc_probe, - .driver = { - .name = rtc_name, - }, -}; - -module_platform_driver(rtc_platform_driver); diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index d1d5a44d9122..ba0d22a5b421 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -614,8 +614,7 @@ static void x1205_sysfs_unregister(struct device *dev) } -static int x1205_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int x1205_probe(struct i2c_client *client) { int err = 0; unsigned char sr; @@ -681,7 +680,7 @@ static struct i2c_driver x1205_driver = { .name = "rtc-x1205", .of_match_table = x1205_dt_ids, }, - .probe = x1205_probe, + .probe_new = x1205_probe, .remove = x1205_remove, .id_table = x1205_id, }; diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c index f440bb52be92..c9b85c838ebe 100644 --- a/drivers/rtc/rtc-zynqmp.c +++ b/drivers/rtc/rtc-zynqmp.c @@ -6,6 +6,7 @@ * */ +#include <linux/clk.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> @@ -36,17 +37,23 @@ #define RTC_OSC_EN BIT(24) #define RTC_BATT_EN BIT(31) -#define RTC_CALIB_DEF 0x198233 +#define RTC_CALIB_DEF 0x7FFF #define RTC_CALIB_MASK 0x1FFFFF #define RTC_ALRM_MASK BIT(1) #define RTC_MSEC 1000 +#define RTC_FR_MASK 0xF0000 +#define RTC_FR_MAX_TICKS 16 +#define RTC_PPB 1000000000LL +#define RTC_MIN_OFFSET -32768000 +#define RTC_MAX_OFFSET 32767000 struct xlnx_rtc_dev { struct rtc_device *rtc; void __iomem *reg_base; int alarm_irq; int sec_irq; - unsigned int calibval; + struct clk *rtc_clk; + unsigned int freq; }; static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm) @@ -61,13 +68,6 @@ static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm) */ new_time = rtc_tm_to_time64(tm) + 1; - /* - * Writing into calibration register will clear the Tick Counter and - * force the next second to be signaled exactly in 1 second period - */ - xrtcdev->calibval &= RTC_CALIB_MASK; - writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR)); - writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR); /* @@ -173,15 +173,76 @@ static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev) rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL); rtc_ctrl |= RTC_BATT_EN; writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL); +} - /* - * Based on crystal freq of 33.330 KHz - * set the seconds counter and enable, set fractions counter - * to default value suggested as per design spec - * to correct RTC delay in frequency over period of time. +static int xlnx_rtc_read_offset(struct device *dev, long *offset) +{ + struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev); + unsigned long long rtc_ppb = RTC_PPB; + unsigned int tick_mult = do_div(rtc_ppb, xrtcdev->freq); + unsigned int calibval; + long offset_val; + + calibval = readl(xrtcdev->reg_base + RTC_CALIB_RD); + /* Offset with seconds ticks */ + offset_val = calibval & RTC_TICK_MASK; + offset_val = offset_val - RTC_CALIB_DEF; + offset_val = offset_val * tick_mult; + + /* Offset with fractional ticks */ + if (calibval & RTC_FR_EN) + offset_val += ((calibval & RTC_FR_MASK) >> RTC_FR_DATSHIFT) + * (tick_mult / RTC_FR_MAX_TICKS); + *offset = offset_val; + + return 0; +} + +static int xlnx_rtc_set_offset(struct device *dev, long offset) +{ + struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev); + unsigned long long rtc_ppb = RTC_PPB; + unsigned int tick_mult = do_div(rtc_ppb, xrtcdev->freq); + unsigned char fract_tick = 0; + unsigned int calibval; + short int max_tick; + int fract_offset; + + if (offset < RTC_MIN_OFFSET || offset > RTC_MAX_OFFSET) + return -ERANGE; + + /* Number ticks for given offset */ + max_tick = div_s64_rem(offset, tick_mult, &fract_offset); + + /* Number fractional ticks for given offset */ + if (fract_offset) { + if (fract_offset < 0) { + fract_offset = fract_offset + tick_mult; + max_tick--; + } + if (fract_offset > (tick_mult / RTC_FR_MAX_TICKS)) { + for (fract_tick = 1; fract_tick < 16; fract_tick++) { + if (fract_offset <= + (fract_tick * + (tick_mult / RTC_FR_MAX_TICKS))) + break; + } + } + } + + /* Zynqmp RTC uses second and fractional tick + * counters for compensation */ - xrtcdev->calibval &= RTC_CALIB_MASK; - writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR)); + calibval = max_tick + RTC_CALIB_DEF; + + if (fract_tick) + calibval |= RTC_FR_EN; + + calibval |= (fract_tick << RTC_FR_DATSHIFT); + + writel(calibval, (xrtcdev->reg_base + RTC_CALIB_WR)); + + return 0; } static const struct rtc_class_ops xlnx_rtc_ops = { @@ -190,6 +251,8 @@ static const struct rtc_class_ops xlnx_rtc_ops = { .read_alarm = xlnx_rtc_read_alarm, .set_alarm = xlnx_rtc_set_alarm, .alarm_irq_enable = xlnx_rtc_alarm_irq_enable, + .read_offset = xlnx_rtc_read_offset, + .set_offset = xlnx_rtc_set_offset, }; static irqreturn_t xlnx_rtc_interrupt(int irq, void *id) @@ -255,10 +318,22 @@ static int xlnx_rtc_probe(struct platform_device *pdev) return ret; } - ret = of_property_read_u32(pdev->dev.of_node, "calibration", - &xrtcdev->calibval); - if (ret) - xrtcdev->calibval = RTC_CALIB_DEF; + /* Getting the rtc_clk info */ + xrtcdev->rtc_clk = devm_clk_get_optional(&pdev->dev, "rtc_clk"); + if (IS_ERR(xrtcdev->rtc_clk)) { + if (PTR_ERR(xrtcdev->rtc_clk) != -EPROBE_DEFER) + dev_warn(&pdev->dev, "Device clock not found.\n"); + } + xrtcdev->freq = clk_get_rate(xrtcdev->rtc_clk); + if (!xrtcdev->freq) { + ret = of_property_read_u32(pdev->dev.of_node, "calibration", + &xrtcdev->freq); + if (ret) + xrtcdev->freq = RTC_CALIB_DEF; + } + ret = readl(xrtcdev->reg_base + RTC_CALIB_RD); + if (!ret) + writel(xrtcdev->freq, (xrtcdev->reg_base + RTC_CALIB_WR)); xlnx_init_rtc(xrtcdev); |