Merge tag 'rproc-v4.19' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This adds support for pre-start and post-shutdown hooks for remoteproc
  subdevices, refactors the Qualcomm Hexagon support to allow reuse
  between several drivers, makes authentication in the MDT file loader
  optional, migrates a few format strings to use %pK and migrates the
  Davinci driver to use the reset framework"

* tag 'rproc-v4.19' of git://github.com/andersson/remoteproc:
  remoteproc/davinci: use the reset framework
  remoteproc/davinci: Mark error recovery as disabled
  remoteproc: st_slim: replace "%p" with "%pK"
  remoteproc: replace "%p" with "%pK"
  remoteproc: qcom: fix Q6V5_WCSS dependencies
  remoteproc: Reset table_ptr in rproc_start() failure paths
  remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote
  remoteproc: qcom q6v5: fix modular build
  remoteproc: Introduce prepare and unprepare for subdevices
  remoteproc: rename subdev probe and remove functions
  remoteproc: Make client initialize ops in rproc_subdev
  remoteproc: Make start and stop in subdev optional
  remoteproc: Rename subdev functions to start/stop
  remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
  remoteproc: qcom: q6v5-pil: Use common q6v5 helpers
  remoteproc: qcom: adsp: Use common q6v5 helpers
  remoteproc: q6v5: Extract common resource handling
  remoteproc: qcom: mdt_loader: Make the firmware authentication optional

15 files changed, 1168 insertions, 351 deletions

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index cd1c168fd188..052d4dd347f9 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -93,6 +93,7 @@ config QCOM_ADSP_PIL
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select MFD_SYSCON
 	select QCOM_MDT_LOADER
+	select QCOM_Q6V5_COMMON
 	select QCOM_RPROC_COMMON
 	select QCOM_SCM
 	help
@@ -102,6 +103,11 @@ config QCOM_ADSP_PIL
 config QCOM_RPROC_COMMON
 	tristate
 
+config QCOM_Q6V5_COMMON
+	tristate
+	depends on ARCH_QCOM
+	depends on QCOM_SMEM
+
 config QCOM_Q6V5_PIL
 	tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
 	depends on OF && ARCH_QCOM
@@ -110,12 +116,29 @@ config QCOM_Q6V5_PIL
 	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select MFD_SYSCON
+	select QCOM_Q6V5_COMMON
 	select QCOM_RPROC_COMMON
 	select QCOM_SCM
 	help
 	  Say y here to support the Qualcomm Peripherial Image Loader for the
 	  Hexagon V5 based remote processors.
 
+config QCOM_Q6V5_WCSS
+	tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
+	depends on OF && ARCH_QCOM
+	depends on QCOM_SMEM
+	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
+	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
+	depends on QCOM_SYSMON || QCOM_SYSMON=n
+	select MFD_SYSCON
+	select QCOM_MDT_LOADER
+	select QCOM_Q6V5_COMMON
+	select QCOM_RPROC_COMMON
+	select QCOM_SCM
+	help
+	  Say y here to support the Qualcomm Peripheral Image Loader for the
+	  Hexagon V5 based WCSS remote processors.
+
 config QCOM_SYSMON
 	tristate "Qualcomm sysmon driver"
 	depends on RPMSG
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 02627ede8d4a..03332fa7e2ee 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -16,7 +16,9 @@ obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
 obj-$(CONFIG_KEYSTONE_REMOTEPROC)	+= keystone_remoteproc.o
 obj-$(CONFIG_QCOM_ADSP_PIL)		+= qcom_adsp_pil.o
 obj-$(CONFIG_QCOM_RPROC_COMMON)		+= qcom_common.o
+obj-$(CONFIG_QCOM_Q6V5_COMMON)		+= qcom_q6v5.o
 obj-$(CONFIG_QCOM_Q6V5_PIL)		+= qcom_q6v5_pil.o
+obj-$(CONFIG_QCOM_Q6V5_WCSS)		+= qcom_q6v5_wcss.o
 obj-$(CONFIG_QCOM_SYSMON)		+= qcom_sysmon.o
 obj-$(CONFIG_QCOM_WCNSS_PIL)		+= qcom_wcnss_pil.o
 qcom_wcnss_pil-y			+= qcom_wcnss.o
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index b668e32996e2..e230bef71be1 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -10,6 +10,7 @@
 
 #include <linux/bitops.h>
 #include <linux/clk.h>
+#include <linux/reset.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -20,8 +21,6 @@
 #include <linux/platform_device.h>
 #include <linux/remoteproc.h>
 
-#include <mach/clock.h>   /* for davinci_clk_reset_assert/deassert() */
-
 #include "remoteproc_internal.h"
 
 static char *da8xx_fw_name;
@@ -72,6 +71,7 @@ struct da8xx_rproc {
 	struct da8xx_rproc_mem *mem;
 	int num_mems;
 	struct clk *dsp_clk;
+	struct reset_control *dsp_reset;
 	void (*ack_fxn)(struct irq_data *data);
 	struct irq_data *irq_data;
 	void __iomem *chipsig;
@@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
 	struct device *dev = rproc->dev.parent;
 	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
 	struct clk *dsp_clk = drproc->dsp_clk;
+	struct reset_control *dsp_reset = drproc->dsp_reset;
 	int ret;
 
 	/* hw requires the start (boot) address be on 1KB boundary */
@@ -155,7 +156,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
 		return ret;
 	}
 
-	davinci_clk_reset_deassert(dsp_clk);
+	ret = reset_control_deassert(dsp_reset);
+	if (ret) {
+		dev_err(dev, "reset_control_deassert() failed: %d\n", ret);
+		clk_disable_unprepare(dsp_clk);
+		return ret;
+	}
 
 	return 0;
 }
@@ -163,8 +169,15 @@ static int da8xx_rproc_start(struct rproc *rproc)
 static int da8xx_rproc_stop(struct rproc *rproc)
 {
 	struct da8xx_rproc *drproc = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	int ret;
+
+	ret = reset_control_assert(drproc->dsp_reset);
+	if (ret) {
+		dev_err(dev, "reset_control_assert() failed: %d\n", ret);
+		return ret;
+	}
 
-	davinci_clk_reset_assert(drproc->dsp_clk);
 	clk_disable_unprepare(drproc->dsp_clk);
 
 	return 0;
@@ -232,6 +245,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
 	struct resource *bootreg_res;
 	struct resource *chipsig_res;
 	struct clk *dsp_clk;
+	struct reset_control *dsp_reset;
 	void __iomem *chipsig;
 	void __iomem *bootreg;
 	int irq;
@@ -268,6 +282,15 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
 		return PTR_ERR(dsp_clk);
 	}
 
+	dsp_reset = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(dsp_reset)) {
+		if (PTR_ERR(dsp_reset) != -EPROBE_DEFER)
+			dev_err(dev, "unable to get reset control: %ld\n",
+				PTR_ERR(dsp_reset));
+
+		return PTR_ERR(dsp_reset);
+	}
+
 	if (dev->of_node) {
 		ret = of_reserved_mem_device_init(dev);
 		if (ret) {
@@ -284,9 +307,13 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
 		goto free_mem;
 	}
 
+	/* error recovery is not supported at present */
+	rproc->recovery_disabled = true;
+
 	drproc = rproc->priv;
 	drproc->rproc = rproc;
 	drproc->dsp_clk = dsp_clk;
+	drproc->dsp_reset = dsp_reset;
 	rproc->has_iommu = false;
 
 	ret = da8xx_rproc_get_internal_memories(pdev, drproc);
@@ -309,7 +336,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
 	 * *not* in reset, but da8xx_rproc_start() needs the DSP to be
 	 * held in reset at the time it is called.
 	 */
-	ret = davinci_clk_reset_assert(drproc->dsp_clk);
+	ret = reset_control_assert(dsp_reset);
 	if (ret)
 		goto free_rproc;
 
diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_adsp_pil.c
index 89a86ce07f99..d4339a6da616 100644
--- a/drivers/remoteproc/qcom_adsp_pil.c
+++ b/drivers/remoteproc/qcom_adsp_pil.c
@@ -31,6 +31,7 @@
 #include <linux/soc/qcom/smem_state.h>
 
 #include "qcom_common.h"
+#include "qcom_q6v5.h"
 #include "remoteproc_internal.h"
 
 struct adsp_data {
@@ -48,14 +49,7 @@ struct qcom_adsp {
 	struct device *dev;
 	struct rproc *rproc;
 
-	int wdog_irq;
-	int fatal_irq;
-	int ready_irq;
-	int handover_irq;
-	int stop_ack_irq;
-
-	struct qcom_smem_state *state;
-	unsigned stop_bit;
+	struct qcom_q6v5 q6v5;
 
 	struct clk *xo;
 	struct clk *aggre2_clk;
@@ -96,6 +90,8 @@ static int adsp_start(struct rproc *rproc)
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
 	int ret;
 
+	qcom_q6v5_prepare(&adsp->q6v5);
+
 	ret = clk_prepare_enable(adsp->xo);
 	if (ret)
 		return ret;
@@ -119,16 +115,14 @@ static int adsp_start(struct rproc *rproc)
 		goto disable_px_supply;
 	}
 
-	ret = wait_for_completion_timeout(&adsp->start_done,
-					  msecs_to_jiffies(5000));
-	if (!ret) {
+	ret = qcom_q6v5_wait_for_start(&adsp->q6v5, msecs_to_jiffies(5000));
+	if (ret == -ETIMEDOUT) {
 		dev_err(adsp->dev, "start timed out\n");
 		qcom_scm_pas_shutdown(adsp->pas_id);
-		ret = -ETIMEDOUT;
 		goto disable_px_supply;
 	}
 
-	ret = 0;
+	return 0;
 
 disable_px_supply:
 	regulator_disable(adsp->px_supply);
@@ -142,28 +136,34 @@ disable_xo_clk:
 	return ret;
 }
 
+static void qcom_pas_handover(struct qcom_q6v5 *q6v5)
+{
+	struct qcom_adsp *adsp = container_of(q6v5, struct qcom_adsp, q6v5);
+
+	regulator_disable(adsp->px_supply);
+	regulator_disable(adsp->cx_supply);
+	clk_disable_unprepare(adsp->aggre2_clk);
+	clk_disable_unprepare(adsp->xo);
+}
+
 static int adsp_stop(struct rproc *rproc)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
+	int handover;
 	int ret;
 
-	qcom_smem_state_update_bits(adsp->state,
-				    BIT(adsp->stop_bit),
-				    BIT(adsp->stop_bit));
-
-	ret = wait_for_completion_timeout(&adsp->stop_done,
-					  msecs_to_jiffies(5000));
-	if (ret == 0)
+	ret = qcom_q6v5_request_stop(&adsp->q6v5);
+	if (ret == -ETIMEDOUT)
 		dev_err(adsp->dev, "timed out on wait\n");
 
-	qcom_smem_state_update_bits(adsp->state,
-				    BIT(adsp->stop_bit),
-				    0);
-
 	ret = qcom_scm_pas_shutdown(adsp->pas_id);
 	if (ret)
 		dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
 
+	handover = qcom_q6v5_unprepare(&adsp->q6v5);
+	if (handover)
+		qcom_pas_handover(&adsp->q6v5);
+
 	return ret;
 }
 
@@ -187,53 +187,6 @@ static const struct rproc_ops adsp_ops = {
 	.load = adsp_load,
 };
 
-static irqreturn_t adsp_wdog_interrupt(int irq, void *dev)
-{
-	struct qcom_adsp *adsp = dev;
-
-	rproc_report_crash(adsp->rproc, RPROC_WATCHDOG);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t adsp_fatal_interrupt(int irq, void *dev)
-{
-	struct qcom_adsp *adsp = dev;
-	size_t len;
-	char *msg;
-
-	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, adsp->crash_reason_smem, &len);
-	if (!IS_ERR(msg) && len > 0 && msg[0])
-		dev_err(adsp->dev, "fatal error received: %s\n", msg);
-
-	rproc_report_crash(adsp->rproc, RPROC_FATAL_ERROR);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t adsp_ready_interrupt(int irq, void *dev)
-{
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t adsp_handover_interrupt(int irq, void *dev)
-{
-	struct qcom_adsp *adsp = dev;
-
-	complete(&adsp->start_done);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t adsp_stop_ack_interrupt(int irq, void *dev)
-{
-	struct qcom_adsp *adsp = dev;
-
-	complete(&adsp->stop_done);
-
-	return IRQ_HANDLED;
-}
-
 static int adsp_init_clock(struct qcom_adsp *adsp)
 {
 	int ret;
@@ -272,29 +225,6 @@ static int adsp_init_regulator(struct qcom_adsp *adsp)
 	return PTR_ERR_OR_ZERO(adsp->px_supply);
 }
 
-static int adsp_request_irq(struct qcom_adsp *adsp,
-			     struct platform_device *pdev,
-			     const char *name,
-			     irq_handler_t thread_fn)
-{
-	int ret;
-
-	ret = platform_get_irq_byname(pdev, name);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "no %s IRQ defined\n", name);
-		return ret;
-	}
-
-	ret = devm_request_threaded_irq(&pdev->dev, ret,
-					NULL, thread_fn,
-					IRQF_ONESHOT,
-					"adsp", adsp);
-	if (ret)
-		dev_err(&pdev->dev, "request %s IRQ failed\n", name);
-
-	return ret;
-}
-
 static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
 {
 	struct device_node *node;
@@ -348,13 +278,9 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->dev = &pdev->dev;
 	adsp->rproc = rproc;
 	adsp->pas_id = desc->pas_id;
-	adsp->crash_reason_smem = desc->crash_reason_smem;
 	adsp->has_aggre2_clk = desc->has_aggre2_clk;
 	platform_set_drvdata(pdev, adsp);
 
-	init_completion(&adsp->start_done);
-	init_completion(&adsp->stop_done);
-
 	ret = adsp_alloc_memory_region(adsp);
 	if (ret)
 		goto free_rproc;
@@ -367,37 +293,10 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	ret = adsp_request_irq(adsp, pdev, "wdog", adsp_wdog_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->wdog_irq = ret;
-
-	ret = adsp_request_irq(adsp, pdev, "fatal", adsp_fatal_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->fatal_irq = ret;
-
-	ret = adsp_request_irq(adsp, pdev, "ready", adsp_ready_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->ready_irq = ret;
-
-	ret = adsp_request_irq(adsp, pdev, "handover", adsp_handover_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->handover_irq = ret;
-
-	ret = adsp_request_irq(adsp, pdev, "stop-ack", adsp_stop_ack_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->stop_ack_irq = ret;
-
-	adsp->state = qcom_smem_state_get(&pdev->dev, "stop",
-					  &adsp->stop_bit);
-	if (IS_ERR(adsp->state)) {
-		ret = PTR_ERR(adsp->state);
+	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
+			     qcom_pas_handover);
+	if (ret)
 		goto free_rproc;
-	}
 
 	qcom_add_glink_subdev(rproc, &adsp->glink_subdev);
 	qcom_add_smd_subdev(rproc, &adsp->smd_subdev);
@@ -422,7 +321,6 @@ static int adsp_remove(struct platform_device *pdev)
 {
 	struct qcom_adsp *adsp = platform_get_drvdata(pdev);
 
-	qcom_smem_state_put(adsp->state);
 	rproc_del(adsp->rproc);
 
 	qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev);
diff --git a/drivers/remoteproc/qcom_common.c b/drivers/remoteproc/qcom_common.c
index acfc99f82fb8..6f77840140bf 100644
--- a/drivers/remoteproc/qcom_common.c
+++ b/drivers/remoteproc/qcom_common.c
@@ -33,7 +33,7 @@
 
 static BLOCKING_NOTIFIER_HEAD(ssr_notifiers);
 
-static int glink_subdev_probe(struct rproc_subdev *subdev)
+static int glink_subdev_start(struct rproc_subdev *subdev)
 {
 	struct qcom_rproc_glink *glink = to_glink_subdev(subdev);
 
@@ -42,7 +42,7 @@ static int glink_subdev_probe(struct rproc_subdev *subdev)
 	return PTR_ERR_OR_ZERO(glink->edge);
 }
 
-static void glink_subdev_remove(struct rproc_subdev *subdev, bool crashed)
+static void glink_subdev_stop(struct rproc_subdev *subdev, bool crashed)
 {
 	struct qcom_rproc_glink *glink = to_glink_subdev(subdev);
 
@@ -64,7 +64,10 @@ void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink)
 		return;
 
 	glink->dev = dev;
-	rproc_add_subdev(rproc, &glink->subdev, glink_subdev_probe, glink_subdev_remove);
+	glink->subdev.start = glink_subdev_start;
+	glink->subdev.stop = glink_subdev_stop;
+
+	rproc_add_subdev(rproc, &glink->subdev);
 }
 EXPORT_SYMBOL_GPL(qcom_add_glink_subdev);
 
@@ -126,7 +129,7 @@ int qcom_register_dump_segments(struct rproc *rproc,
 }
 EXPORT_SYMBOL_GPL(qcom_register_dump_segments);
 
-static int smd_subdev_probe(struct rproc_subdev *subdev)
+static int smd_subdev_start(struct rproc_subdev *subdev)
 {
 	struct qcom_rproc_subdev *smd = to_smd_subdev(subdev);
 
@@ -135,7 +138,7 @@ static int smd_subdev_probe(struct rproc_subdev *subdev)
 	return PTR_ERR_OR_ZERO(smd->edge);
 }
 
-static void smd_subdev_remove(struct rproc_subdev *subdev, bool crashed)
+static void smd_subdev_stop(struct rproc_subdev *subdev, bool crashed)
 {
 	struct qcom_rproc_subdev *smd = to_smd_subdev(subdev);
 
@@ -157,7 +160,10 @@ void qcom_add_smd_subdev(struct rproc *rproc, struct qcom_rproc_subdev *smd)
 		return;
 
 	smd->dev = dev;
-	rproc_add_subdev(rproc, &smd->subdev, smd_subdev_probe, smd_subdev_remove);
+	smd->subdev.start = smd_subdev_start;
+	smd->subdev.stop = smd_subdev_stop;
+
+	rproc_add_subdev(rproc, &smd->subdev);
 }
 EXPORT_SYMBOL_GPL(qcom_add_smd_subdev);
 
@@ -202,11 +208,6 @@ void qcom_unregister_ssr_notifier(struct notifier_block *nb)
 }
 EXPORT_SYMBOL_GPL(qcom_unregister_ssr_notifier);
 
-static int ssr_notify_start(struct rproc_subdev *subdev)
-{
-	return  0;
-}
-
 static void ssr_notify_stop(struct rproc_subdev *subdev, bool crashed)
 {
 	struct qcom_rproc_ssr *ssr = to_ssr_subdev(subdev);
@@ -227,8 +228,9 @@ void qcom_add_ssr_subdev(struct rproc *rproc, struct qcom_rproc_ssr *ssr,
 			 const char *ssr_name)
 {
 	ssr->name = ssr_name;
+	ssr->subdev.stop = ssr_notify_stop;
 
-	rproc_add_subdev(rproc, &ssr->subdev, ssr_notify_start, ssr_notify_stop);
+	rproc_add_subdev(rproc, &ssr->subdev);
 }
 EXPORT_SYMBOL_GPL(qcom_add_ssr_subdev);
 
diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
new file mode 100644
index 000000000000..61a760ee4aac
--- /dev/null
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Qualcomm Peripheral Image Loader for Q6V5
+ *
+ * Copyright (C) 2016-2018 Linaro Ltd.
+ * Copyright (C) 2014 Sony Mobile Communications AB
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/smem_state.h>
+#include <linux/remoteproc.h>
+#include "qcom_q6v5.h"
+
+/**
+ * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
+ * @q6v5:	reference to qcom_q6v5 context to be reinitialized
+ *
+ * Return: 0 on success, negative errno on failure
+ */
+int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5)
+{
+	reinit_completion(&q6v5->start_done);
+	reinit_completion(&q6v5->stop_done);
+
+	q6v5->running = true;
+	q6v5->handover_issued = false;
+
+	enable_irq(q6v5->handover_irq);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_q6v5_prepare);
+
+/**
+ * qcom_q6v5_unprepare() - unprepare the qcom_q6v5 context after stop
+ * @q6v5:	reference to qcom_q6v5 context to be unprepared
+ *
+ * Return: 0 on success, 1 if handover hasn't yet been called
+ */
+int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5)
+{
+	disable_irq(q6v5->handover_irq);
+
+	return !q6v5->handover_issued;
+}
+EXPORT_SYMBOL_GPL(qcom_q6v5_unprepare);
+
+static irqreturn_t q6v5_wdog_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+	size_t len;
+	char *msg;
+
+	/* Sometimes the stop triggers a watchdog rather than a stop-ack */
+	if (!q6v5->running) {
+		complete(&q6v5->stop_done);
+		return IRQ_HANDLED;
+	}
+
+	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, q6v5->crash_reason, &len);
+	if (!IS_ERR(msg) && len > 0 && msg[0])
+		dev_err(q6v5->dev, "watchdog received: %s\n", msg);
+	else
+		dev_err(q6v5->dev, "watchdog without message\n");
+
+	rproc_report_crash(q6v5->rproc, RPROC_WATCHDOG);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t q6v5_fatal_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+	size_t len;
+	char *msg;
+
+	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, q6v5->crash_reason, &len);
+	if (!IS_ERR(msg) && len > 0 && msg[0])
+		dev_err(q6v5->dev, "fatal error received: %s\n", msg);
+	else
+		dev_err(q6v5->dev, "fatal error without message\n");
+
+	rproc_report_crash(q6v5->rproc, RPROC_FATAL_ERROR);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t q6v5_ready_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+
+	complete(&q6v5->start_done);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * qcom_q6v5_wait_for_start() - wait for remote processor start signal
+ * @q6v5:	reference to qcom_q6v5 context
+ * @timeout:	timeout to wait for the event, in jiffies
+ *
+ * qcom_q6v5_unprepare() should not be called when this function fails.
+ *
+ * Return: 0 on success, -ETIMEDOUT on timeout
+ */
+int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout)
+{
+	int ret;
+
+	ret = wait_for_completion_timeout(&q6v5->start_done, timeout);
+	if (!ret)
+		disable_irq(q6v5->handover_irq);
+
+	return !ret ? -ETIMEDOUT : 0;
+}
+EXPORT_SYMBOL_GPL(qcom_q6v5_wait_for_start);
+
+static irqreturn_t q6v5_handover_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+
+	if (q6v5->handover)
+		q6v5->handover(q6v5);
+
+	q6v5->handover_issued = true;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t q6v5_stop_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+
+	complete(&q6v5->stop_done);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * qcom_q6v5_request_stop() - request the remote processor to stop
+ * @q6v5:	reference to qcom_q6v5 context
+ *
+ * Return: 0 on success, negative errno on failure
+ */
+int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5)
+{
+	int ret;
+
+	q6v5->running = false;
+
+	qcom_smem_state_update_bits(q6v5->state,
+				    BIT(q6v5->stop_bit), BIT(q6v5->stop_bit));
+
+	ret = wait_for_completion_timeout(&q6v5->stop_done, 5 * HZ);
+
+	qcom_smem_state_update_bits(q6v5->state, BIT(q6v5->stop_bit), 0);
+
+	return ret == 0 ? -ETIMEDOUT : 0;
+}
+EXPORT_SYMBOL_GPL(qcom_q6v5_request_stop);
+
+/**
+ * qcom_q6v5_init() - initializer of the q6v5 common struct
+ * @q6v5:	handle to be initialized
+ * @pdev:	platform_device reference for acquiring resources
+ * @rproc:	associated remoteproc instance
+ * @crash_reason: SMEM id for crash reason string, or 0 if none
+ * @handover:	function to be called when proxy resources should be released
+ *
+ * Return: 0 on success, negative errno on failure
+ */
+int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
+		   struct rproc *rproc, int crash_reason,
+		   void (*handover)(struct qcom_q6v5 *q6v5))
+{
+	int ret;
+
+	q6v5->rproc = rproc;
+	q6v5->dev = &pdev->dev;
+	q6v5->crash_reason = crash_reason;
+	q6v5->handover = handover;
+
+	init_completion(&q6v5->start_done);
+	init_completion(&q6v5->stop_done);
+
+	q6v5->wdog_irq = platform_get_irq_byname(pdev, "wdog");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->wdog_irq,
+					NULL, q6v5_wdog_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 wdog", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire wdog IRQ\n");
+		return ret;
+	}
+
+	q6v5->fatal_irq = platform_get_irq_byname(pdev, "fatal");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->fatal_irq,
+					NULL, q6v5_fatal_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 fatal", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire fatal IRQ\n");
+		return ret;
+	}
+
+	q6v5->ready_irq = platform_get_irq_byname(pdev, "ready");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->ready_irq,
+					NULL, q6v5_ready_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 ready", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire ready IRQ\n");
+		return ret;
+	}
+
+	q6v5->handover_irq = platform_get_irq_byname(pdev, "handover");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->handover_irq,
+					NULL, q6v5_handover_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 handover", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire handover IRQ\n");
+		return ret;
+	}
+	disable_irq(q6v5->handover_irq);
+
+	q6v5->stop_irq = platform_get_irq_byname(pdev, "stop-ack");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->stop_irq,
+					NULL, q6v5_stop_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 stop", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire stop-ack IRQ\n");
+		return ret;
+	}
+
+	q6v5->state = qcom_smem_state_get(&pdev->dev, "stop", &q6v5->stop_bit);
+	if (IS_ERR(q6v5->state)) {
+		dev_err(&pdev->dev, "failed to acquire stop state\n");
+		return PTR_ERR(q6v5->state);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_q6v5_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Qualcomm Peripheral Image Loader for Q6V5");
diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
new file mode 100644
index 000000000000..7ac92c1e0f49
--- /dev/null
+++ b/drivers/remoteproc/qcom_q6v5.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __QCOM_Q6V5_H__
+#define __QCOM_Q6V5_H__
+
+#include <linux/kernel.h>
+#include <linux/completion.h>
+
+struct rproc;
+struct qcom_smem_state;
+
+struct qcom_q6v5 {
+	struct device *dev;
+	struct rproc *rproc;
+
+	struct qcom_smem_state *state;
+	unsigned stop_bit;
+
+	int wdog_irq;
+	int fatal_irq;
+	int ready_irq;
+	int handover_irq;
+	int stop_irq;
+
+	bool handover_issued;
+
+	struct completion start_done;
+	struct completion stop_done;
+
+	int crash_reason;
+
+	bool running;
+
+	void (*handover)(struct qcom_q6v5 *q6v5);
+};
+
+int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
+		   struct rproc *rproc, int crash_reason,
+		   void (*handover)(struct qcom_q6v5 *q6v5));
+
+int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
+int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
+int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5);
+int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout);
+
+#endif
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 2bf8e7c49f2a..d7a4b9eca5d2 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -30,12 +30,11 @@
 #include <linux/remoteproc.h>
 #include <linux/reset.h>
 #include <linux/soc/qcom/mdt_loader.h>
-#include <linux/soc/qcom/smem.h>
-#include <linux/soc/qcom/smem_state.h>
 #include <linux/iopoll.h>
 
 #include "remoteproc_internal.h"
 #include "qcom_common.h"
+#include "qcom_q6v5.h"
 
 #include <linux/qcom_scm.h>
 
@@ -151,12 +150,7 @@ struct q6v5 {
 
 	struct reset_control *mss_restart;
 
-	struct qcom_smem_state *state;
-	unsigned stop_bit;
-
-	int handover_irq;
-
-	bool proxy_unvoted;
+	struct qcom_q6v5 q6v5;
 
 	struct clk *active_clks[8];
 	struct clk *reset_clks[4];
@@ -170,8 +164,6 @@ struct q6v5 {
 	int active_reg_count;
 	int proxy_reg_count;
 
-	struct completion start_done;
-	struct completion stop_done;
 	bool running;
 
 	phys_addr_t mba_phys;
@@ -798,9 +790,7 @@ static int q6v5_start(struct rproc *rproc)
 	int xfermemop_ret;
 	int ret;
 
-	qproc->proxy_unvoted = false;
-
-	enable_irq(qproc->handover_irq);
+	qcom_q6v5_prepare(&qproc->q6v5);
 
 	ret = q6v5_regulator_enable(qproc, qproc->proxy_regs,
 				    qproc->proxy_reg_count);
@@ -875,11 +865,9 @@ static int q6v5_start(struct rproc *rproc)
 	if (ret)
 		goto reclaim_mpss;
 
-	ret = wait_for_completion_timeout(&qproc->start_done,
-					  msecs_to_jiffies(5000));
-	if (ret == 0) {
+	ret = qcom_q6v5_wait_for_start(&qproc->q6v5, msecs_to_jiffies(5000));
+	if (ret == -ETIMEDOUT) {
 		dev_err(qproc->dev, "start timed out\n");
-		ret = -ETIMEDOUT;
 		goto reclaim_mpss;
 	}
 
@@ -933,7 +921,7 @@ disable_proxy_reg:
 			       qproc->proxy_reg_count);
 
 disable_irqs:
-	disable_irq(qproc->handover_irq);
+	qcom_q6v5_unprepare(&qproc->q6v5);
 
 	return ret;
 }
@@ -946,16 +934,10 @@ static int q6v5_stop(struct rproc *rproc)
 
 	qproc->running = false;
 
-	qcom_smem_state_update_bits(qproc->state,
-				    BIT(qproc->stop_bit), BIT(qproc->stop_bit));
-
-	ret = wait_for_completion_timeout(&qproc->stop_done,
-					  msecs_to_jiffies(5000));
-	if (ret == 0)
+	ret = qcom_q6v5_request_stop(&qproc->q6v5);
+	if (ret == -ETIMEDOUT)
 		dev_err(qproc->dev, "timed out on wait\n");
 
-	qcom_smem_state_update_bits(qproc->state, BIT(qproc->stop_bit), 0);
-
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
@@ -976,9 +958,8 @@ static int q6v5_stop(struct rproc *rproc)
 
 	q6v5_reset_assert(qproc);
 
-	disable_irq(qproc->handover_irq);
-
-	if (!qproc->proxy_unvoted) {
+	ret = qcom_q6v5_unprepare(&qproc->q6v5);
+	if (ret) {
 		q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
 				 qproc->proxy_clk_count);
 		q6v5_regulator_disable(qproc, qproc->proxy_regs,
@@ -1014,74 +995,14 @@ static const struct rproc_ops q6v5_ops = {
 	.load = q6v5_load,
 };
 
-static irqreturn_t q6v5_wdog_interrupt(int irq, void *dev)
-{
-	struct q6v5 *qproc = dev;
-	size_t len;
-	char *msg;
-
-	/* Sometimes the stop triggers a watchdog rather than a stop-ack */
-	if (!qproc->running) {
-		complete(&qproc->stop_done);
-		return IRQ_HANDLED;
-	}
-
-	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, MPSS_CRASH_REASON_SMEM, &len);
-	if (!IS_ERR(msg) && len > 0 && msg[0])
-		dev_err(qproc->dev, "watchdog received: %s\n", msg);
-	else
-		dev_err(qproc->dev, "watchdog without message\n");
-
-	rproc_report_crash(qproc->rproc, RPROC_WATCHDOG);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t q6v5_fatal_interrupt(int irq, void *dev)
-{
-	struct q6v5 *qproc = dev;
-	size_t len;
-	char *msg;
-
-	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, MPSS_CRASH_REASON_SMEM, &len);
-	if (!IS_ERR(msg) && len > 0 && msg[0])
-		dev_err(qproc->dev, "fatal error received: %s\n", msg);
-	else
-		dev_err(qproc->dev, "fatal error without message\n");
-
-	rproc_report_crash(qproc->rproc, RPROC_FATAL_ERROR);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t q6v5_ready_interrupt(int irq, void *dev)
-{
-	struct q6v5 *qproc = dev;
-
-	complete(&qproc->start_done);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t q6v5_handover_interrupt(int irq, void *dev)
+static void qcom_msa_handover(struct qcom_q6v5 *q6v5)
 {
-	struct q6v5 *qproc = dev;
+	struct q6v5 *qproc = container_of(q6v5, struct q6v5, q6v5);
 
 	q6v5_clk_disable(qproc->dev, qproc->proxy_clks,
 			 qproc->proxy_clk_count);
 	q6v5_regulator_disable(qproc, qproc->proxy_regs,
 			       qproc->proxy_reg_count);
-
-	qproc->proxy_unvoted = true;
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t q6v5_stop_ack_interrupt(int irq, void *dev)
-{
-	struct q6v5 *qproc = dev;
-
-	complete(&qproc->stop_done);
-	return IRQ_HANDLED;
 }
 
 static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
@@ -1154,30 +1075,6 @@ static int q6v5_init_reset(struct q6v5 *qproc)
 	return 0;
 }
 
-static int q6v5_request_irq(struct q6v5 *qproc,
-			     struct platform_device *pdev,
-			     const char *name,
-			     irq_handler_t thread_fn)
-{
-	int irq;
-	int ret;
-
-	irq = platform_get_irq_byname(pdev, name);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no %s IRQ defined\n", name);
-		return irq;
-	}
-
-	ret = devm_request_threaded_irq(&pdev->dev, irq,
-					NULL, thread_fn,
-					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-					"q6v5", qproc);
-	if (ret)
-		dev_err(&pdev->dev, "request %s IRQ failed\n", name);
-
-	return ret ? : irq;
-}
-
 static int q6v5_alloc_memory_region(struct q6v5 *qproc)
 {
 	struct device_node *child;
@@ -1247,9 +1144,6 @@ static int q6v5_probe(struct platform_device *pdev)
 	qproc->rproc = rproc;
 	platform_set_drvdata(pdev, qproc);
 
-	init_completion(&qproc->start_done);
-	init_completion(&qproc->stop_done);
-
 	ret = q6v5_init_mem(qproc, pdev);
 	if (ret)
 		goto free_rproc;
@@ -1305,33 +1199,12 @@ static int q6v5_probe(struct platform_device *pdev)
 	qproc->version = desc->version;
 	qproc->has_alt_reset = desc->has_alt_reset;
 	qproc->need_mem_protection = desc->need_mem_protection;
-	ret = q6v5_request_irq(qproc, pdev, "wdog", q6v5_wdog_interrupt);
-	if (ret < 0)
-		goto free_rproc;
 
-	ret = q6v5_request_irq(qproc, pdev, "fatal", q6v5_fatal_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-
-	ret = q6v5_request_irq(qproc, pdev, "ready", q6v5_ready_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-
-	ret = q6v5_request_irq(qproc, pdev, "handover", q6v5_handover_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	qproc->handover_irq = ret;
-	disable_irq(qproc->handover_irq);
-
-	ret = q6v5_request_irq(qproc, pdev, "stop-ack", q6v5_stop_ack_interrupt);
-	if (ret < 0)
+	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
+			     qcom_msa_handover);
+	if (ret)
 		goto free_rproc;
 
-	qproc->state = qcom_smem_state_get(&pdev->dev, "stop", &qproc->stop_bit);
-	if (IS_ERR(qproc->state)) {
-		ret = PTR_ERR(qproc->state);
-		goto free_rproc;
-	}
 	qproc->mpss_perm = BIT(QCOM_SCM_VMID_HLOS);
 	qproc->mba_perm = BIT(QCOM_SCM_VMID_HLOS);
 	qcom_add_glink_subdev(rproc, &qproc->glink_subdev);
@@ -1370,7 +1243,6 @@ static const struct rproc_hexagon_res sdm845_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_clk_names = (char*[]){
 			"xo",
-			"axis2",
 			"prng",
 			NULL
 	},
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
new file mode 100644
index 000000000000..f93e1e4a1cc0
--- /dev/null
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Linaro Ltd.
+ * Copyright (C) 2014 Sony Mobile Communications AB
+ * Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ */
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/soc/qcom/mdt_loader.h>
+#include "qcom_common.h"
+#include "qcom_q6v5.h"
+
+#define WCSS_CRASH_REASON		421
+
+/* Q6SS Register Offsets */
+#define Q6SS_RESET_REG		0x014
+#define Q6SS_GFMUX_CTL_REG		0x020
+#define Q6SS_PWR_CTL_REG		0x030
+#define Q6SS_MEM_PWR_CTL		0x0B0
+
+/* AXI Halt Register Offsets */
+#define AXI_HALTREQ_REG			0x0
+#define AXI_HALTACK_REG			0x4
+#define AXI_IDLE_REG			0x8
+
+#define HALT_ACK_TIMEOUT_MS		100
+
+/* Q6SS_RESET */
+#define Q6SS_STOP_CORE			BIT(0)
+#define Q6SS_CORE_ARES			BIT(1)
+#define Q6SS_BUS_ARES_ENABLE		BIT(2)
+
+/* Q6SS_GFMUX_CTL */
+#define Q6SS_CLK_ENABLE			BIT(1)
+
+/* Q6SS_PWR_CTL */
+#define Q6SS_L2DATA_STBY_N		BIT(18)
+#define Q6SS_SLP_RET_N			BIT(19)
+#define Q6SS_CLAMP_IO			BIT(20)
+#define QDSS_BHS_ON			BIT(21)
+
+/* Q6SS parameters */
+#define Q6SS_LDO_BYP		BIT(25)
+#define Q6SS_BHS_ON		BIT(24)
+#define Q6SS_CLAMP_WL		BIT(21)
+#define Q6SS_CLAMP_QMC_MEM		BIT(22)
+#define HALT_CHECK_MAX_LOOPS		200
+#define Q6SS_XO_CBCR		GENMASK(5, 3)
+
+/* Q6SS config/status registers */
+#define TCSR_GLOBAL_CFG0	0x0
+#define TCSR_GLOBAL_CFG1	0x4
+#define SSCAON_CONFIG		0x8
+#define SSCAON_STATUS		0xc
+#define Q6SS_BHS_STATUS		0x78
+#define Q6SS_RST_EVB		0x10
+
+#define BHS_EN_REST_ACK		BIT(0)
+#define SSCAON_ENABLE		BIT(13)
+#define SSCAON_BUS_EN		BIT(15)
+#define SSCAON_BUS_MUX_MASK	GENMASK(18, 16)
+
+#define MEM_BANKS		19
+#define TCSR_WCSS_CLK_MASK	0x1F
+#define TCSR_WCSS_CLK_ENABLE	0x14
+
+struct q6v5_wcss {
+	struct device *dev;
+
+	void __iomem *reg_base;
+	void __iomem *rmb_base;
+
+	struct regmap *halt_map;
+	u32 halt_q6;
+	u32 halt_wcss;
+	u32 halt_nc;
+
+	struct reset_control *wcss_aon_reset;
+	struct reset_control *wcss_reset;
+	struct reset_control *wcss_q6_reset;
+
+	struct qcom_q6v5 q6v5;
+
+	phys_addr_t mem_phys;
+	phys_addr_t mem_reloc;
+	void *mem_region;
+	size_t mem_size;
+};
+
+static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
+{
+	int ret;
+	u32 val;
+	int i;
+
+	/* Assert resets, stop core */
+	val = readl(wcss->reg_base + Q6SS_RESET_REG);
+	val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
+	writel(val, wcss->reg_base + Q6SS_RESET_REG);
+
+	/* BHS require xo cbcr to be enabled */
+	val = readl(wcss->reg_base + Q6SS_XO_CBCR);
+	val |= 0x1;
+	writel(val, wcss->reg_base + Q6SS_XO_CBCR);
+
+	/* Read CLKOFF bit to go low indicating CLK is enabled */
+	ret = readl_poll_timeout(wcss->reg_base + Q6SS_XO_CBCR,
+				 val, !(val & BIT(31)), 1,
+				 HALT_CHECK_MAX_LOOPS);
+	if (ret) {
+		dev_err(wcss->dev,
+			"xo cbcr enabling timed out (rc:%d)\n", ret);
+		return ret;
+	}
+	/* Enable power block headswitch and wait for it to stabilize */
+	val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+	val |= Q6SS_BHS_ON;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+	udelay(1);
+
+	/* Put LDO in bypass mode */
+	val |= Q6SS_LDO_BYP;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* Deassert Q6 compiler memory clamp */
+	val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+	val &= ~Q6SS_CLAMP_QMC_MEM;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* Deassert memory peripheral sleep and L2 memory standby */
+	val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* Turn on L1, L2, ETB and JU memories 1 at a time */
+	val = readl(wcss->reg_base + Q6SS_MEM_PWR_CTL);
+	for (i = MEM_BANKS; i >= 0; i--) {
+		val |= BIT(i);
+		writel(val, wcss->reg_base + Q6SS_MEM_PWR_CTL);
+		/*
+		 * Read back value to ensure the write is done then
+		 * wait for 1us for both memory peripheral and data
+		 * array to turn on.
+		 */
+		val |= readl(wcss->reg_base + Q6SS_MEM_PWR_CTL);
+		udelay(1);
+	}
+	/* Remove word line clamp */
+	val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+	val &= ~Q6SS_CLAMP_WL;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* Remove IO clamp */
+	val &= ~Q6SS_CLAMP_IO;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* Bring core out of reset */
+	val = readl(wcss->reg_base + Q6SS_RESET_REG);
+	val &= ~Q6SS_CORE_ARES;
+	writel(val, wcss->reg_base + Q6SS_RESET_REG);
+
+	/* Turn on core clock */
+	val = readl(wcss->reg_base + Q6SS_GFMUX_CTL_REG);
+	val |= Q6SS_CLK_ENABLE;
+	writel(val, wcss->reg_base + Q6SS_GFMUX_CTL_REG);
+
+	/* Start core execution */
+	val = readl(wcss->reg_base + Q6SS_RESET_REG);
+	val &= ~Q6SS_STOP_CORE;
+	writel(val, wcss->reg_base + Q6SS_RESET_REG);
+
+	return 0;
+}
+
+static int q6v5_wcss_start(struct rproc *rproc)
+{
+	struct q6v5_wcss *wcss = rproc->priv;
+	int ret;
+
+	qcom_q6v5_prepare(&wcss->q6v5);
+
+	/* Release Q6 and WCSS reset */
+	ret = reset_control_deassert(wcss->wcss_reset);
+	if (ret) {
+		dev_err(wcss->dev, "wcss_reset failed\n");
+		return ret;
+	}
+
+	ret = reset_control_deassert(wcss->wcss_q6_reset);
+	if (ret) {
+		dev_err(wcss->dev, "wcss_q6_reset failed\n");
+		goto wcss_reset;
+	}
+
+	/* Lithium configuration - clock gating and bus arbitration */
+	ret = regmap_update_bits(wcss->halt_map,
+				 wcss->halt_nc + TCSR_GLOBAL_CFG0,
+				 TCSR_WCSS_CLK_MASK,
+				 TCSR_WCSS_CLK_ENABLE);
+	if (ret)
+		goto wcss_q6_reset;
+
+	ret = regmap_update_bits(wcss->halt_map,
+				 wcss->halt_nc + TCSR_GLOBAL_CFG1,
+				 1, 0);
+	if (ret)
+		goto wcss_q6_reset;
+
+	/* Write bootaddr to EVB so that Q6WCSS will jump there after reset */
+	writel(rproc->bootaddr >> 4, wcss->reg_base + Q6SS_RST_EVB);
+
+	ret = q6v5_wcss_reset(wcss);
+	if (ret)
+		goto wcss_q6_reset;
+
+	ret = qcom_q6v5_wait_for_start(&wcss->q6v5, 5 * HZ);
+	if (ret == -ETIMEDOUT)
+		dev_err(wcss->dev, "start timed out\n");
+
+	return ret;
+
+wcss_q6_reset:
+	reset_control_assert(wcss->wcss_q6_reset);
+
+wcss_reset:
+	reset_control_assert(wcss->wcss_reset);
+
+	return ret;
+}
+
+static void q6v5_wcss_halt_axi_port(struct q6v5_wcss *wcss,
+				    struct regmap *halt_map,
+				    u32 offset)
+{
+	unsigned long timeout;
+	unsigned int val;
+	int ret;
+
+	/* Check if we're already idle */
+	ret = regmap_read(halt_map, offset + AXI_IDLE_REG, &val);
+	if (!ret && val)
+		return;
+
+	/* Assert halt request */
+	regmap_write(halt_map, offset + AXI_HALTREQ_REG, 1);
+
+	/* Wait for halt */
+	timeout = jiffies + msecs_to_jiffies(HALT_ACK_TIMEOUT_MS);
+	for (;;) {
+		ret = regmap_read(halt_map, offset + AXI_HALTACK_REG, &val);
+		if (ret || val || time_after(jiffies, timeout))
+			break;
+
+		msleep(1);
+	}
+
+	ret = regmap_read(halt_map, offset + AXI_IDLE_REG, &val);
+	if (ret || !val)
+		dev_err(wcss->dev, "port failed halt\n");
+
+	/* Clear halt request (port will remain halted until reset) */
+	regmap_write(halt_map, offset + AXI_HALTREQ_REG, 0);
+}
+
+static int q6v5_wcss_powerdown(struct q6v5_wcss *wcss)
+{
+	int ret;
+	u32 val;
+
+	/* 1 - Assert WCSS/Q6 HALTREQ */
+	q6v5_wcss_halt_axi_port(wcss, wcss->halt_map, wcss->halt_wcss);
+
+	/* 2 - Enable WCSSAON_CONFIG */
+	val = readl(wcss->rmb_base + SSCAON_CONFIG);
+	val |= SSCAON_ENABLE;
+	writel(val, wcss->rmb_base + SSCAON_CONFIG);
+
+	/* 3 - Set SSCAON_CONFIG */
+	val |= SSCAON_BUS_EN;
+	val &= ~SSCAON_BUS_MUX_MASK;
+	writel(val, wcss->rmb_base + SSCAON_CONFIG);
+
+	/* 4 - SSCAON_CONFIG 1 */
+	val |= BIT(1);
+	writel(val, wcss->rmb_base + SSCAON_CONFIG);
+
+	/* 5 - wait for SSCAON_STATUS */
+	ret = readl_poll_timeout(wcss->rmb_base + SSCAON_STATUS,
+				 val, (val & 0xffff) == 0x400, 1000,
+				 HALT_CHECK_MAX_LOOPS);
+	if (ret) {
+		dev_err(wcss->dev,
+			"can't get SSCAON_STATUS rc:%d)\n", ret);
+		return ret;
+	}
+
+	/* 6 - De-assert WCSS_AON reset */
+	reset_control_assert(wcss->wcss_aon_reset);
+
+	/* 7 - Disable WCSSAON_CONFIG 13 */
+	val = readl(wcss->rmb_base + SSCAON_CONFIG);
+	val &= ~SSCAON_ENABLE;
+	writel(val, wcss->rmb_base + SSCAON_CONFIG);
+
+	/* 8 - De-assert WCSS/Q6 HALTREQ */
+	reset_control_assert(wcss->wcss_reset);
+
+	return 0;
+}
+
+static int q6v5_q6_powerdown(struct q6v5_wcss *wcss)
+{
+	int ret;
+	u32 val;
+	int i;
+
+	/* 1 - Halt Q6 bus interface */
+	q6v5_wcss_halt_axi_port(wcss, wcss->halt_map, wcss->halt_q6);
+
+	/* 2 - Disable Q6 Core clock */
+	val = readl(wcss->reg_base + Q6SS_GFMUX_CTL_REG);
+	val &= ~Q6SS_CLK_ENABLE;
+	writel(val, wcss->reg_base + Q6SS_GFMUX_CTL_REG);
+
+	/* 3 - Clamp I/O */
+	val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+	val |= Q6SS_CLAMP_IO;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* 4 - Clamp WL */
+	val |= QDSS_BHS_ON;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* 5 - Clear Erase standby */
+	val &= ~Q6SS_L2DATA_STBY_N;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* 6 - Clear Sleep RTN */
+	val &= ~Q6SS_SLP_RET_N;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* 7 - turn off Q6 memory foot/head switch one bank at a time */
+	for (i = 0; i < 20; i++) {
+		val = readl(wcss->reg_base + Q6SS_MEM_PWR_CTL);
+		val &= ~BIT(i);
+		writel(val, wcss->reg_base + Q6SS_MEM_PWR_CTL);
+		mdelay(1);
+	}
+
+	/* 8 - Assert QMC memory RTN */
+	val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+	val |= Q6SS_CLAMP_QMC_MEM;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+	/* 9 - Turn off BHS */
+	val &= ~Q6SS_BHS_ON;
+	writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+	udelay(1);
+
+	/* 10 - Wait till BHS Reset is done */
+	ret = readl_poll_timeout(wcss->reg_base + Q6SS_BHS_STATUS,
+				 val, !(val & BHS_EN_REST_ACK), 1000,
+				 HALT_CHECK_MAX_LOOPS);
+	if (ret) {
+		dev_err(wcss->dev, "BHS_STATUS not OFF (rc:%d)\n", ret);
+		return ret;
+	}
+
+	/* 11 -  Assert WCSS reset */
+	reset_control_assert(wcss->wcss_reset);
+
+	/* 12 - Assert Q6 reset */
+	reset_control_assert(wcss->wcss_q6_reset);
+
+	return 0;
+}
+
+static int q6v5_wcss_stop(struct rproc *rproc)
+{
+	struct q6v5_wcss *wcss = rproc->priv;
+	int ret;
+
+	/* WCSS powerdown */
+	ret = qcom_q6v5_request_stop(&wcss->q6v5);
+	if (ret == -ETIMEDOUT) {
+		dev_err(wcss->dev, "timed out on wait\n");
+		return ret;
+	}
+
+	ret = q6v5_wcss_powerdown(wcss);
+	if (ret)
+		return ret;
+
+	/* Q6 Power down */
+	ret = q6v5_q6_powerdown(wcss);
+	if (ret)
+		return ret;
+
+	qcom_q6v5_unprepare(&wcss->q6v5);
+
+	return 0;
+}
+
+static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, int len)
+{
+	struct q6v5_wcss *wcss = rproc->priv;
+	int offset;
+
+	offset = da - wcss->mem_reloc;
+	if (offset < 0 || offset + len > wcss->mem_size)
+		return NULL;
+
+	return wcss->mem_region + offset;
+}
+
+static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
+{
+	struct q6v5_wcss *wcss = rproc->priv;
+
+	return qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
+				     0, wcss->mem_region, wcss->mem_phys,
+				     wcss->mem_size, &wcss->mem_reloc);
+}
+
+static const struct rproc_ops q6v5_wcss_ops = {
+	.start = q6v5_wcss_start,
+	.stop = q6v5_wcss_stop,
+	.da_to_va = q6v5_wcss_da_to_va,
+	.load = q6v5_wcss_load,
+	.get_boot_addr = rproc_elf_get_boot_addr,
+};
+
+static int q6v5_wcss_init_reset(struct q6v5_wcss *wcss)
+{
+	struct device *dev = wcss->dev;
+
+	wcss->wcss_aon_reset = devm_reset_control_get(dev, "wcss_aon_reset");
+	if (IS_ERR(wcss->wcss_aon_reset)) {
+		dev_err(wcss->dev, "unable to acquire wcss_aon_reset\n");
+		return PTR_ERR(wcss->wcss_aon_reset);
+	}
+
+	wcss->wcss_reset = devm_reset_control_get(dev, "wcss_reset");
+	if (IS_ERR(wcss->wcss_reset)) {
+		dev_err(wcss->dev, "unable to acquire wcss_reset\n");
+		return PTR_ERR(wcss->wcss_reset);
+	}
+
+	wcss->wcss_q6_reset = devm_reset_control_get(dev, "wcss_q6_reset");
+	if (IS_ERR(wcss->wcss_q6_reset)) {
+		dev_err(wcss->dev, "unable to acquire wcss_q6_reset\n");
+		return PTR_ERR(wcss->wcss_q6_reset);
+	}
+
+	return 0;
+}
+
+static int q6v5_wcss_init_mmio(struct q6v5_wcss *wcss,
+			       struct platform_device *pdev)
+{
+	struct of_phandle_args args;
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qdsp6");
+	wcss->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wcss->reg_base))
+		return PTR_ERR(wcss->reg_base);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rmb");
+	wcss->rmb_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wcss->rmb_base))
+		return PTR_ERR(wcss->rmb_base);
+
+	ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+					       "qcom,halt-regs", 3, 0, &args);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n");
+		return -EINVAL;
+	}
+
+	wcss->halt_map = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	if (IS_ERR(wcss->halt_map))
+		return PTR_ERR(wcss->halt_map);
+
+	wcss->halt_q6 = args.args[0];
+	wcss->halt_wcss = args.args[1];
+	wcss->halt_nc = args.args[2];
+
+	return 0;
+}
+
+static int q6v5_alloc_memory_region(struct q6v5_wcss *wcss)
+{
+	struct reserved_mem *rmem = NULL;
+	struct device_node *node;
+	struct device *dev = wcss->dev;
+
+	node = of_parse_phandle(dev->of_node, "memory-region", 0);
+	if (node)
+		rmem = of_reserved_mem_lookup(node);
+	of_node_put(node);
+
+	if (!rmem) {
+		dev_err(dev, "unable to acquire memory-region\n");
+		return -EINVAL;
+	}
+
+	wcss->mem_phys = rmem->base;
+	wcss->mem_reloc = rmem->base;
+	wcss->mem_size = rmem->size;
+	wcss->mem_region = devm_ioremap_wc(dev, wcss->mem_phys, wcss->mem_size);
+	if (!wcss->mem_region) {
+		dev_err(dev, "unable to map memory region: %pa+%pa\n",
+			&rmem->base, &rmem->size);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int q6v5_wcss_probe(struct platform_device *pdev)
+{
+	struct q6v5_wcss *wcss;
+	struct rproc *rproc;
+	int ret;
+
+	rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_wcss_ops,
+			    "IPQ8074/q6_fw.mdt", sizeof(*wcss));
+	if (!rproc) {
+		dev_err(&pdev->dev, "failed to allocate rproc\n");
+		return -ENOMEM;
+	}
+
+	wcss = rproc->priv;
+	wcss->dev = &pdev->dev;
+
+	ret = q6v5_wcss_init_mmio(wcss, pdev);
+	if (ret)
+		goto free_rproc;
+
+	ret = q6v5_alloc_memory_region(wcss);
+	if (ret)
+		goto free_rproc;
+
+	ret = q6v5_wcss_init_reset(wcss);
+	if (ret)
+		goto free_rproc;
+
+	ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, WCSS_CRASH_REASON, NULL);
+	if (ret)
+		goto free_rproc;
+
+	ret = rproc_add(rproc);
+	if (ret)
+		goto free_rproc;
+
+	platform_set_drvdata(pdev, rproc);
+
+	return 0;
+
+free_rproc:
+	rproc_free(rproc);
+
+	return ret;
+}
+
+static int q6v5_wcss_remove(struct platform_device *pdev)
+{
+	struct rproc *rproc = platform_get_drvdata(pdev);
+
+	rproc_del(rproc);
+	rproc_free(rproc);
+
+	return 0;
+}
+
+static const struct of_device_id q6v5_wcss_of_match[] = {
+	{ .compatible = "qcom,ipq8074-wcss-pil" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, q6v5_wcss_of_match);
+
+static struct platform_driver q6v5_wcss_driver = {
+	.probe = q6v5_wcss_probe,
+	.remove = q6v5_wcss_remove,
+	.driver = {
+		.name = "qcom-q6v5-wcss-pil",
+		.of_match_table = q6v5_wcss_of_match,
+	},
+};
+module_platform_driver(q6v5_wcss_driver);
+
+MODULE_DESCRIPTION("Hexagon WCSS Peripheral Image Loader");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
index f085545d7da5..e976a602b015 100644
--- a/drivers/remoteproc/qcom_sysmon.c
+++ b/drivers/remoteproc/qcom_sysmon.c
@@ -469,7 +469,10 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 
 	qmi_add_lookup(&sysmon->qmi, 43, 0, 0);
 
-	rproc_add_subdev(rproc, &sysmon->subdev, sysmon_start, sysmon_stop);
+	sysmon->subdev.start = sysmon_start;
+	sysmon->subdev.stop = sysmon_stop;
+
+	rproc_add_subdev(rproc, &sysmon->subdev);
 
 	sysmon->nb.notifier_call = sysmon_notify;
 	blocking_notifier_chain_register(&sysmon_notifiers, &sysmon->nb);
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index a9609d971f7f..aa6206706fe3 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -241,7 +241,7 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
 	if (notifyid > rproc->max_notifyid)
 		rproc->max_notifyid = notifyid;
 
-	dev_dbg(dev, "vring%d: va %p dma %pad size 0x%x idr %d\n",
+	dev_dbg(dev, "vring%d: va %pK dma %pad size 0x%x idr %d\n",
 		i, va, &dma, size, notifyid);
 
 	rvring->va = va;
@@ -301,14 +301,14 @@ void rproc_free_vring(struct rproc_vring *rvring)
 	rsc->vring[idx].notifyid = -1;
 }
 
-static int rproc_vdev_do_probe(struct rproc_subdev *subdev)
+static int rproc_vdev_do_start(struct rproc_subdev *subdev)
 {
 	struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
 
 	return rproc_add_virtio_dev(rvdev, rvdev->id);
 }
 
-static void rproc_vdev_do_remove(struct rproc_subdev *subdev, bool crashed)
+static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
 {
 	struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
 
@@ -399,8 +399,10 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
 
 	list_add_tail(&rvdev->node, &rproc->rvdevs);
 
-	rproc_add_subdev(rproc, &rvdev->subdev,
-			 rproc_vdev_do_probe, rproc_vdev_do_remove);
+	rvdev->subdev.start = rproc_vdev_do_start;
+	rvdev->subdev.stop = rproc_vdev_do_stop;
+
+	rproc_add_subdev(rproc, &rvdev->subdev);
 
 	return 0;
 
@@ -497,7 +499,7 @@ static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc,
 
 	rproc->num_traces++;
 
-	dev_dbg(dev, "%s added: va %p, da 0x%x, len 0x%x\n",
+	dev_dbg(dev, "%s added: va %pK, da 0x%x, len 0x%x\n",
 		name, ptr, rsc->da, rsc->len);
 
 	return 0;
@@ -635,7 +637,7 @@ static int rproc_handle_carveout(struct rproc *rproc,
 		goto free_carv;
 	}
 
-	dev_dbg(dev, "carveout va %p, dma %pad, len 0x%x\n",
+	dev_dbg(dev, "carveout va %pK, dma %pad, len 0x%x\n",
 		va, &dma, rsc->len);
 
 	/*
@@ -774,32 +776,72 @@ static int rproc_handle_resources(struct rproc *rproc,
 	return ret;
 }
 
-static int rproc_probe_subdevices(struct rproc *rproc)
+static int rproc_prepare_subdevices(struct rproc *rproc)
 {
 	struct rproc_subdev *subdev;
 	int ret;
 
 	list_for_each_entry(subdev, &rproc->subdevs, node) {
-		ret = subdev->probe(subdev);
-		if (ret)
-			goto unroll_registration;
+		if (subdev->prepare) {
+			ret = subdev->prepare(subdev);
+			if (ret)
+				goto unroll_preparation;
+		}
+	}
+
+	return 0;
+
+unroll_preparation:
+	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {
+		if (subdev->unprepare)
+			subdev->unprepare(subdev);
+	}
+
+	return ret;
+}
+
+static int rproc_start_subdevices(struct rproc *rproc)
+{
+	struct rproc_subdev *subdev;
+	int ret;
+
+	list_for_each_entry(subdev, &rproc->subdevs, node) {
+		if (subdev->start) {
+			ret = subdev->start(subdev);
+			if (ret)
+				goto unroll_registration;
+		}
 	}
 
 	return 0;
 
 unroll_registration:
-	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node)
-		subdev->remove(subdev, true);
+	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {
+		if (subdev->stop)
+			subdev->stop(subdev, true);
+	}
 
 	return ret;
 }
 
-static void rproc_remove_subdevices(struct rproc *rproc, bool crashed)
+static void rproc_stop_subdevices(struct rproc *rproc, bool crashed)
 {
 	struct rproc_subdev *subdev;
 
-	list_for_each_entry_reverse(subdev, &rproc->subdevs, node)
-		subdev->remove(subdev, crashed);
+	list_for_each_entry_reverse(subdev, &rproc->subdevs, node) {
+		if (subdev->stop)
+			subdev->stop(subdev, crashed);
+	}
+}
+
+static void rproc_unprepare_subdevices(struct rproc *rproc)
+{
+	struct rproc_subdev *subdev;
+
+	list_for_each_entry_reverse(subdev, &rproc->subdevs, node) {
+		if (subdev->unprepare)
+			subdev->unprepare(subdev);
+	}
 }
 
 /**
@@ -894,20 +936,26 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 		rproc->table_ptr = loaded_table;
 	}
 
+	ret = rproc_prepare_subdevices(rproc);
+	if (ret) {
+		dev_err(dev, "failed to prepare subdevices for %s: %d\n",
+			rproc->name, ret);
+		goto reset_table_ptr;
+	}
+
 	/* power up the remote processor */
 	ret = rproc->ops->start(rproc);
 	if (ret) {
 		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
-		return ret;
+		goto unprepare_subdevices;
 	}
 
-	/* probe any subdevices for the remote processor */
-	ret = rproc_probe_subdevices(rproc);
+	/* Start any subdevices for the remote processor */
+	ret = rproc_start_subdevices(rproc);
 	if (ret) {
 		dev_err(dev, "failed to probe subdevices for %s: %d\n",
 			rproc->name, ret);
-		rproc->ops->stop(rproc);
-		return ret;
+		goto stop_rproc;
 	}
 
 	rproc->state = RPROC_RUNNING;
@@ -915,6 +963,15 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 	dev_info(dev, "remote processor %s is now up\n", rproc->name);
 
 	return 0;
+
+stop_rproc:
+	rproc->ops->stop(rproc);
+unprepare_subdevices:
+	rproc_unprepare_subdevices(rproc);
+reset_table_ptr:
+	rproc->table_ptr = rproc->cached_table;
+
+	return ret;
 }
 
 /*
@@ -1014,8 +1071,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
 	struct device *dev = &rproc->dev;
 	int ret;
 
-	/* remove any subdevices for the remote processor */
-	rproc_remove_subdevices(rproc, crashed);
+	/* Stop any subdevices for the remote processor */
+	rproc_stop_subdevices(rproc, crashed);
 
 	/* the installed resource table is no longer accessible */
 	rproc->table_ptr = rproc->cached_table;
@@ -1027,6 +1084,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
 		return ret;
 	}
 
+	rproc_unprepare_subdevices(rproc);
+
 	rproc->state = RPROC_OFFLINE;
 
 	dev_info(dev, "stopped remote processor %s\n", rproc->name);
@@ -1657,17 +1716,11 @@ EXPORT_SYMBOL(rproc_del);
  * rproc_add_subdev() - add a subdevice to a remoteproc
  * @rproc: rproc handle to add the subdevice to
  * @subdev: subdev handle to register
- * @probe: function to call when the rproc boots
- * @remove: function to call when the rproc shuts down
+ *
+ * Caller is responsible for populating optional subdevice function pointers.
  */
-void rproc_add_subdev(struct rproc *rproc,
-		      struct rproc_subdev *subdev,
-		      int (*probe)(struct rproc_subdev *subdev),
-		      void (*remove)(struct rproc_subdev *subdev, bool crashed))
+void rproc_add_subdev(struct rproc *rproc, struct rproc_subdev *subdev)
 {
-	subdev->probe = probe;
-	subdev->remove = remove;
-
 	list_add_tail(&subdev->node, &rproc->subdevs);
 }
 EXPORT_SYMBOL(rproc_add_subdev);
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index a20488336aa0..a5c29f2764a3 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -231,7 +231,7 @@ static int rproc_rsc_table_show(struct seq_file *seq, void *p)
 			}
 			break;
 		default:
-			seq_printf(seq, "Unknown resource type found: %d [hdr: %p]\n",
+			seq_printf(seq, "Unknown resource type found: %d [hdr: %pK]\n",
 				   hdr->type, hdr);
 			break;
 		}
@@ -260,7 +260,7 @@ static int rproc_carveouts_show(struct seq_file *seq, void *p)
 
 	list_for_each_entry(carveout, &rproc->carveouts, node) {
 		seq_puts(seq, "Carveout memory entry:\n");
-		seq_printf(seq, "\tVirtual address: %p\n", carveout->va);
+		seq_printf(seq, "\tVirtual address: %pK\n", carveout->va);
 		seq_printf(seq, "\tDMA address: %pad\n", &carveout->dma);
 		seq_printf(seq, "\tDevice address: 0x%x\n", carveout->da);
 		seq_printf(seq, "\tLength: 0x%x Bytes\n\n", carveout->len);
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index b0633fd4c041..bbecd44df7e8 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -96,7 +96,7 @@ static struct virtqueue *rp_find_vq(struct virtio_device *vdev,
 	size = vring_size(len, rvring->align);
 	memset(addr, 0, size);
 
-	dev_dbg(dev, "vring%d: va %p qsz %d notifyid %d\n",
+	dev_dbg(dev, "vring%d: va %pK qsz %d notifyid %d\n",
 		id, addr, len, rvring->notifyid);
 
 	/*
diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
index 1ffb1f0c43d6..d711d9430a4f 100644
--- a/drivers/remoteproc/st_slim_rproc.c
+++ b/drivers/remoteproc/st_slim_rproc.c
@@ -195,7 +195,8 @@ static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
 		}
 	}
 
-	dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%p\n", da, len, va);
+	dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%pK\n",
+		da, len, va);
 
 	return va;
 }
diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index dc09d7ac905f..1c488024c698 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -74,23 +74,10 @@ ssize_t qcom_mdt_get_size(const struct firmware *fw)
 }
 EXPORT_SYMBOL_GPL(qcom_mdt_get_size);
 
-/**
- * qcom_mdt_load() - load the firmware which header is loaded as fw
- * @dev:	device handle to associate resources with
- * @fw:		firmware object for the mdt file
- * @firmware:	name of the firmware, for construction of segment file names
- * @pas_id:	PAS identifier
- * @mem_region:	allocated memory region to load firmware into
- * @mem_phys:	physical address of allocated memory region
- * @mem_size:	size of the allocated memory region
- * @reloc_base:	adjusted physical address after relocation
- *
- * Returns 0 on success, negative errno otherwise.
- */
-int qcom_mdt_load(struct device *dev, const struct firmware *fw,
-		  const char *firmware, int pas_id, void *mem_region,
-		  phys_addr_t mem_phys, size_t mem_size,
-		  phys_addr_t *reloc_base)
+static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
+			   const char *firmware, int pas_id, void *mem_region,
+			   phys_addr_t mem_phys, size_t mem_size,
+			   phys_addr_t *reloc_base, bool pas_init)
 {
 	const struct elf32_phdr *phdrs;
 	const struct elf32_phdr *phdr;
@@ -121,10 +108,12 @@ int qcom_mdt_load(struct device *dev, const struct firmware *fw,
 	if (!fw_name)
 		return -ENOMEM;
 
-	ret = qcom_scm_pas_init_image(pas_id, fw->data, fw->size);
-	if (ret) {
-		dev_err(dev, "invalid firmware metadata\n");
-		goto out;
+	if (pas_init) {
+		ret = qcom_scm_pas_init_image(pas_id, fw->data, fw->size);
+		if (ret) {
+			dev_err(dev, "invalid firmware metadata\n");
+			goto out;
+		}
 	}
 
 	for (i = 0; i < ehdr->e_phnum; i++) {
@@ -144,10 +133,13 @@ int qcom_mdt_load(struct device *dev, const struct firmware *fw,
 	}
 
 	if (relocate) {
-		ret = qcom_scm_pas_mem_setup(pas_id, mem_phys, max_addr - min_addr);
-		if (ret) {
-			dev_err(dev, "unable to setup relocation\n");
-			goto out;
+		if (pas_init) {
+			ret = qcom_scm_pas_mem_setup(pas_id, mem_phys,
+						     max_addr - min_addr);
+			if (ret) {
+				dev_err(dev, "unable to setup relocation\n");
+				goto out;
+			}
 		}
 
 		/*
@@ -202,7 +194,52 @@ out:
 
 	return ret;
 }
+
+/**
+ * qcom_mdt_load() - load the firmware which header is loaded as fw
+ * @dev:	device handle to associate resources with
+ * @fw:		firmware object for the mdt file
+ * @firmware:	name of the firmware, for construction of segment file names
+ * @pas_id:	PAS identifier
+ * @mem_region:	allocated memory region to load firmware into
+ * @mem_phys:	physical address of allocated memory region
+ * @mem_size:	size of the allocated memory region
+ * @reloc_base:	adjusted physical address after relocation
+ *
+ * Returns 0 on success, negative errno otherwise.
+ */
+int qcom_mdt_load(struct device *dev, const struct firmware *fw,
+		  const char *firmware, int pas_id, void *mem_region,
+		  phys_addr_t mem_phys, size_t mem_size,
+		  phys_addr_t *reloc_base)
+{
+	return __qcom_mdt_load(dev, fw, firmware, pas_id, mem_region, mem_phys,
+			       mem_size, reloc_base, true);
+}
 EXPORT_SYMBOL_GPL(qcom_mdt_load);
 
+/**
+ * qcom_mdt_load_no_init() - load the firmware which header is loaded as fw
+ * @dev:	device handle to associate resources with
+ * @fw:		firmware object for the mdt file
+ * @firmware:	name of the firmware, for construction of segment file names
+ * @pas_id:	PAS identifier
+ * @mem_region:	allocated memory region to load firmware into
+ * @mem_phys:	physical address of allocated memory region
+ * @mem_size:	size of the allocated memory region
+ * @reloc_base:	adjusted physical address after relocation
+ *
+ * Returns 0 on success, negative errno otherwise.
+ */
+int qcom_mdt_load_no_init(struct device *dev, const struct firmware *fw,
+			  const char *firmware, int pas_id,
+			  void *mem_region, phys_addr_t mem_phys,
+			  size_t mem_size, phys_addr_t *reloc_base)
+{
+	return __qcom_mdt_load(dev, fw, firmware, pas_id, mem_region, mem_phys,
+			       mem_size, reloc_base, false);
+}
+EXPORT_SYMBOL_GPL(qcom_mdt_load_no_init);
+
 MODULE_DESCRIPTION("Firmware parser for Qualcomm MDT format");
 MODULE_LICENSE("GPL v2");