summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorJerome Brunet <jbrunet@baylibre.com>2017-10-02 14:27:42 +0200
committerUlf Hansson <ulf.hansson@linaro.org>2017-10-04 10:42:03 +0200
commit3e2b0af411d4bf85bc0fbc385756fd5968adb9fd (patch)
treea634c1b10861d4f8f1dc9d3344f41d610fd0ee6c /drivers
parentca3dcd3ff5b13a31a09a0119dc484b97ec19c4c8 (diff)
downloadlinux-3e2b0af411d4bf85bc0fbc385756fd5968adb9fd.tar.bz2
mmc: meson-gx: fix rx phase reset
Resetting the phase when POWER_ON is set the set_ios() call means that the phase is reset almost every time the set_ios() is called, while the expected behavior was to reset the phase on a power cycle. This had gone unnoticed until now because in all mode (except hs400) the tuning is done after the last to set_ios(). In such case, the tuning result is used anyway. In HS400, there are a few calls to set_ios() after the tuning is done, overwriting the tuning result. Resetting the phase on POWER_UP instead of POWER_ON solve the problem. Fixes: d341ca88eead ("mmc: meson-gx: rework tuning function") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mmc/host/meson-gx-mmc.c6
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 421c8719c202..08a55c2e96e1 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -745,6 +745,10 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_POWER_UP:
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
+
+ /* Reset rx phase */
+ clk_set_phase(host->rx_clk, 0);
+
break;
case MMC_POWER_ON:
@@ -758,8 +762,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->vqmmc_enabled = true;
}
- /* Reset rx phase */
- clk_set_phase(host->rx_clk, 0);
break;
}