summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-12-14 12:43:57 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2019-12-14 12:43:57 -0800
commitaff2a52507bfeb4d44d6a69f6f8d7ca3bcb9b50d (patch)
treeeb77fb693c534a9fd8617bc4841cf3a9cefc4577 /drivers
parenta1b85b3bf9f9922bdc1428cd2ac4528786a05da7 (diff)
parent4bcd9eae731083bb724faf68cce6021213308333 (diff)
downloadlinux-aff2a52507bfeb4d44d6a69f6f8d7ca3bcb9b50d.tar.bz2
Merge tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH: "Here are a number of small staging and IIO driver fixes for reported issues for 5.5-rc2 Nothing major, a bunch of tiny IIO driver issues resolved, and some staging driver fixes for things that people ran into with 5.5-rc1. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits) fbtft: Fix the initialization from property algorithm staging: rtl8712: fix interface sanity check staging: rtl8188eu: fix interface sanity check staging: gigaset: add endpoint-type sanity check staging: gigaset: fix illegal free on probe errors staging: gigaset: fix general protection fault on probe staging: vchiq: call unregister_chrdev_region() when driver registration fails staging: exfat: fix multiple definition error of `rename_file' staging/wlan-ng: add CRC32 dependency in Kconfig staging: hp100: Fix build error without ETHERNET staging: fbtft: Do not hardcode SPI CS polarity inversion staging: exfat: properly support discard in clr_alloc_bitmap() staging/octeon: Mark Ethernet driver as BROKEN iio: adc: max9611: Fix too short conversion time delay iio: ad7949: fix channels mixups iio: imu: st_lsm6dsx: do not power-off accel if events are enabled iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask iio: imu: st_lsm6dsx: fix decimation factor estimation iio: imu: inv_mpu6050: fix temperature reporting using bad unit iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/iio/accel/st_accel_core.c8
-rw-r--r--drivers/iio/adc/ad7124.c7
-rw-r--r--drivers/iio/adc/ad7606.c2
-rw-r--r--drivers/iio/adc/ad7949.c22
-rw-r--r--drivers/iio/adc/intel_mrfld_adc.c2
-rw-r--r--drivers/iio/adc/max1027.c8
-rw-r--r--drivers/iio/adc/max9611.c16
-rw-r--r--drivers/iio/humidity/hdc100x.c2
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c23
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h16
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h6
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c50
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c34
-rw-r--r--drivers/iio/temperature/ltc2983.c6
-rw-r--r--drivers/staging/exfat/exfat.h4
-rw-r--r--drivers/staging/exfat/exfat_core.c10
-rw-r--r--drivers/staging/exfat/exfat_super.c4
-rw-r--r--drivers/staging/fbtft/fb_uc1611.c12
-rw-r--r--drivers/staging/fbtft/fb_watterott.c13
-rw-r--r--drivers/staging/fbtft/fbtft-core.c6
-rw-r--r--drivers/staging/hp/Kconfig1
-rw-r--r--drivers/staging/isdn/gigaset/usb-gigaset.c23
-rw-r--r--drivers/staging/octeon/Kconfig1
-rw-r--r--drivers/staging/rtl8188eu/os_dep/usb_intf.c2
-rw-r--r--drivers/staging/rtl8712/usb_intf.c2
-rw-r--r--drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c2
-rw-r--r--drivers/staging/wlan-ng/Kconfig1
27 files changed, 195 insertions, 88 deletions
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 7b837641f166..7320275c7e56 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -992,6 +992,7 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
#define ST_ACCEL_TRIGGER_OPS NULL
#endif
+#ifdef CONFIG_ACPI
static const struct iio_mount_matrix *
get_mount_matrix(const struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
@@ -1012,7 +1013,6 @@ static const struct iio_chan_spec_ext_info mount_matrix_ext_info[] = {
static int apply_acpi_orientation(struct iio_dev *indio_dev,
struct iio_chan_spec *channels)
{
-#ifdef CONFIG_ACPI
struct st_sensor_data *adata = iio_priv(indio_dev);
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
struct acpi_device *adev;
@@ -1140,10 +1140,14 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev,
out:
kfree(buffer.pointer);
return ret;
+}
#else /* !CONFIG_ACPI */
+static int apply_acpi_orientation(struct iio_dev *indio_dev,
+ struct iio_chan_spec *channels)
+{
return 0;
-#endif
}
+#endif
/*
* st_accel_get_settings() - get sensor settings from device name
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index edc6f1cc90b2..3f03abf100b5 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -39,6 +39,8 @@
#define AD7124_STATUS_POR_FLAG_MSK BIT(4)
/* AD7124_ADC_CONTROL */
+#define AD7124_ADC_CTRL_REF_EN_MSK BIT(8)
+#define AD7124_ADC_CTRL_REF_EN(x) FIELD_PREP(AD7124_ADC_CTRL_REF_EN_MSK, x)
#define AD7124_ADC_CTRL_PWR_MSK GENMASK(7, 6)
#define AD7124_ADC_CTRL_PWR(x) FIELD_PREP(AD7124_ADC_CTRL_PWR_MSK, x)
#define AD7124_ADC_CTRL_MODE_MSK GENMASK(5, 2)
@@ -424,7 +426,10 @@ static int ad7124_init_channel_vref(struct ad7124_state *st,
break;
case AD7124_INT_REF:
st->channel_config[channel_number].vref_mv = 2500;
- break;
+ st->adc_control &= ~AD7124_ADC_CTRL_REF_EN_MSK;
+ st->adc_control |= AD7124_ADC_CTRL_REF_EN(1);
+ return ad_sd_write_reg(&st->sd, AD7124_ADC_CONTROL,
+ 2, st->adc_control);
default:
dev_err(&st->sd.spi->dev, "Invalid reference %d\n", refsel);
return -EINVAL;
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index f5ba94c03a8d..e4683a68522a 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -85,7 +85,7 @@ err_unlock:
static int ad7606_read_samples(struct ad7606_state *st)
{
- unsigned int num = st->chip_info->num_channels;
+ unsigned int num = st->chip_info->num_channels - 1;
u16 *data = st->data;
int ret;
diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
index 5c2b3446fa4a..2c6f60edb7ce 100644
--- a/drivers/iio/adc/ad7949.c
+++ b/drivers/iio/adc/ad7949.c
@@ -89,6 +89,7 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
unsigned int channel)
{
int ret;
+ int i;
int bits_per_word = ad7949_adc->resolution;
int mask = GENMASK(ad7949_adc->resolution, 0);
struct spi_message msg;
@@ -100,12 +101,23 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
},
};
- ret = ad7949_spi_write_cfg(ad7949_adc,
- channel << AD7949_OFFSET_CHANNEL_SEL,
- AD7949_MASK_CHANNEL_SEL);
- if (ret)
- return ret;
+ /*
+ * 1: write CFG for sample N and read old data (sample N-2)
+ * 2: if CFG was not changed since sample N-1 then we'll get good data
+ * at the next xfer, so we bail out now, otherwise we write something
+ * and we read garbage (sample N-1 configuration).
+ */
+ for (i = 0; i < 2; i++) {
+ ret = ad7949_spi_write_cfg(ad7949_adc,
+ channel << AD7949_OFFSET_CHANNEL_SEL,
+ AD7949_MASK_CHANNEL_SEL);
+ if (ret)
+ return ret;
+ if (channel == ad7949_adc->current_channel)
+ break;
+ }
+ /* 3: write something and read actual data */
ad7949_adc->buffer = 0;
spi_message_init_with_transfers(&msg, tx, 1);
ret = spi_sync(ad7949_adc->spi, &msg);
diff --git a/drivers/iio/adc/intel_mrfld_adc.c b/drivers/iio/adc/intel_mrfld_adc.c
index 67d096f8180d..c35a1beb817c 100644
--- a/drivers/iio/adc/intel_mrfld_adc.c
+++ b/drivers/iio/adc/intel_mrfld_adc.c
@@ -185,7 +185,7 @@ static int mrfld_adc_probe(struct platform_device *pdev)
int irq;
int ret;
- indio_dev = devm_iio_device_alloc(dev, sizeof(*indio_dev));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(struct mrfld_adc));
if (!indio_dev)
return -ENOMEM;
diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index e171db20c04a..02834ca3e1ce 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -478,7 +478,13 @@ static int max1027_probe(struct spi_device *spi)
st->trig->ops = &max1027_trigger_ops;
st->trig->dev.parent = &spi->dev;
iio_trigger_set_drvdata(st->trig, indio_dev);
- iio_trigger_register(st->trig);
+ ret = devm_iio_trigger_register(&indio_dev->dev,
+ st->trig);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev,
+ "Failed to register iio trigger\n");
+ return ret;
+ }
ret = devm_request_threaded_irq(&spi->dev, spi->irq,
iio_trigger_generic_data_rdy_poll,
diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c
index da073d72f649..e480529b3f04 100644
--- a/drivers/iio/adc/max9611.c
+++ b/drivers/iio/adc/max9611.c
@@ -89,6 +89,12 @@
#define MAX9611_TEMP_SCALE_NUM 1000000
#define MAX9611_TEMP_SCALE_DIV 2083
+/*
+ * Conversion time is 2 ms (typically) at Ta=25 degreeC
+ * No maximum value is known, so play it safe.
+ */
+#define MAX9611_CONV_TIME_US_RANGE 3000, 3300
+
struct max9611_dev {
struct device *dev;
struct i2c_client *i2c_client;
@@ -236,11 +242,9 @@ static int max9611_read_single(struct max9611_dev *max9611,
return ret;
}
- /*
- * need a delay here to make register configuration
- * stabilize. 1 msec at least, from empirical testing.
- */
- usleep_range(1000, 2000);
+ /* need a delay here to make register configuration stabilize. */
+
+ usleep_range(MAX9611_CONV_TIME_US_RANGE);
ret = i2c_smbus_read_word_swapped(max9611->i2c_client, reg_addr);
if (ret < 0) {
@@ -507,7 +511,7 @@ static int max9611_init(struct max9611_dev *max9611)
MAX9611_REG_CTRL2, 0);
return ret;
}
- usleep_range(1000, 2000);
+ usleep_range(MAX9611_CONV_TIME_US_RANGE);
return 0;
}
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index 963ff043eecf..7ecd2ffa3132 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -229,7 +229,7 @@ static int hdc100x_read_raw(struct iio_dev *indio_dev,
*val2 = 65536;
return IIO_VAL_FRACTIONAL;
} else {
- *val = 100;
+ *val = 100000;
*val2 = 65536;
return IIO_VAL_FRACTIONAL;
}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 45e77b308238..0686e41bb8a1 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -117,6 +117,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6050,
.config = &chip_config_6050,
.fifo_size = 1024,
+ .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
},
{
.whoami = INV_MPU6500_WHOAMI_VALUE,
@@ -124,6 +125,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
+ .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
},
{
.whoami = INV_MPU6515_WHOAMI_VALUE,
@@ -131,6 +133,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
+ .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
},
{
.whoami = INV_MPU6000_WHOAMI_VALUE,
@@ -138,6 +141,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6050,
.config = &chip_config_6050,
.fifo_size = 1024,
+ .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
},
{
.whoami = INV_MPU9150_WHOAMI_VALUE,
@@ -145,6 +149,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6050,
.config = &chip_config_6050,
.fifo_size = 1024,
+ .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
},
{
.whoami = INV_MPU9250_WHOAMI_VALUE,
@@ -152,6 +157,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
+ .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
},
{
.whoami = INV_MPU9255_WHOAMI_VALUE,
@@ -159,6 +165,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
+ .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
},
{
.whoami = INV_ICM20608_WHOAMI_VALUE,
@@ -166,6 +173,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_6500,
.config = &chip_config_6050,
.fifo_size = 512,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
},
{
.whoami = INV_ICM20602_WHOAMI_VALUE,
@@ -173,6 +181,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = &reg_set_icm20602,
.config = &chip_config_6050,
.fifo_size = 1008,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
},
};
@@ -481,12 +490,8 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- if (st->chip_type == INV_ICM20602)
- *val2 = INV_ICM20602_TEMP_SCALE;
- else
- *val2 = INV_MPU6050_TEMP_SCALE;
-
+ *val = st->hw->temp.scale / 1000000;
+ *val2 = st->hw->temp.scale % 1000000;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_MAGN:
return inv_mpu_magn_get_scale(st, chan, val, val2);
@@ -496,11 +501,7 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_OFFSET:
switch (chan->type) {
case IIO_TEMP:
- if (st->chip_type == INV_ICM20602)
- *val = INV_ICM20602_TEMP_OFFSET;
- else
- *val = INV_MPU6050_TEMP_OFFSET;
-
+ *val = st->hw->temp.offset;
return IIO_VAL_INT;
default:
return -EINVAL;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index f1fb7b6bdab1..b096e010d4ee 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -107,6 +107,7 @@ struct inv_mpu6050_chip_config {
* @reg: register map of the chip.
* @config: configuration of the chip.
* @fifo_size: size of the FIFO in bytes.
+ * @temp: offset and scale to apply to raw temperature.
*/
struct inv_mpu6050_hw {
u8 whoami;
@@ -114,6 +115,10 @@ struct inv_mpu6050_hw {
const struct inv_mpu6050_reg_map *reg;
const struct inv_mpu6050_chip_config *config;
size_t fifo_size;
+ struct {
+ int offset;
+ int scale;
+ } temp;
};
/*
@@ -279,16 +284,19 @@ struct inv_mpu6050_state {
#define INV_MPU6050_REG_UP_TIME_MIN 5000
#define INV_MPU6050_REG_UP_TIME_MAX 10000
-#define INV_MPU6050_TEMP_OFFSET 12421
-#define INV_MPU6050_TEMP_SCALE 2941
+#define INV_MPU6050_TEMP_OFFSET 12420
+#define INV_MPU6050_TEMP_SCALE 2941176
#define INV_MPU6050_MAX_GYRO_FS_PARAM 3
#define INV_MPU6050_MAX_ACCL_FS_PARAM 3
#define INV_MPU6050_THREE_AXIS 3
#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
-#define INV_ICM20602_TEMP_OFFSET 8170
-#define INV_ICM20602_TEMP_SCALE 3060
+#define INV_MPU6500_TEMP_OFFSET 7011
+#define INV_MPU6500_TEMP_SCALE 2995178
+
+#define INV_ICM20608_TEMP_OFFSET 8170
+#define INV_ICM20608_TEMP_SCALE 3059976
/* 6 + 6 + 7 (for MPU9x50) = 19 round up to 24 and plus 8 */
#define INV_MPU6050_OUTPUT_DATA_SIZE 32
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index c605b153be41..dc55d7dff3eb 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -320,7 +320,6 @@ enum st_lsm6dsx_fifo_mode {
* @odr: Output data rate of the sensor [Hz].
* @watermark: Sensor watermark level.
* @sip: Number of samples in a given pattern.
- * @decimator: FIFO decimation factor.
* @ts_ref: Sensor timestamp reference for hw one.
* @ext_info: Sensor settings if it is connected to i2c controller
*/
@@ -334,7 +333,6 @@ struct st_lsm6dsx_sensor {
u16 watermark;
u8 sip;
- u8 decimator;
s64 ts_ref;
struct {
@@ -351,9 +349,9 @@ struct st_lsm6dsx_sensor {
* @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
* @conf_lock: Mutex to prevent concurrent FIFO configuration update.
* @page_lock: Mutex to prevent concurrent memory page configuration.
- * @fifo_mode: FIFO operating mode supported by the device.
* @suspend_mask: Suspended sensor bitmask.
* @enable_mask: Enabled sensor bitmask.
+ * @fifo_mask: Enabled hw FIFO bitmask.
* @ts_gain: Hw timestamp rate after internal calibration.
* @ts_sip: Total number of timestamp samples in a given pattern.
* @sip: Total number of samples (acc/gyro/ts) in a given pattern.
@@ -373,9 +371,9 @@ struct st_lsm6dsx_hw {
struct mutex conf_lock;
struct mutex page_lock;
- enum st_lsm6dsx_fifo_mode fifo_mode;
u8 suspend_mask;
u8 enable_mask;
+ u8 fifo_mask;
s64 ts_gain;
u8 ts_sip;
u8 sip;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index d416990ae309..cb536b81a1c2 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -78,14 +78,20 @@ struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = {
{ 32, 0x7 },
};
-static int st_lsm6dsx_get_decimator_val(u8 val)
+static int
+st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
{
const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table);
+ u32 decimator = max_odr / sensor->odr;
int i;
- for (i = 0; i < max_size; i++)
- if (st_lsm6dsx_decimator_table[i].decimator == val)
+ if (decimator > 1)
+ decimator = round_down(decimator, 2);
+
+ for (i = 0; i < max_size; i++) {
+ if (st_lsm6dsx_decimator_table[i].decimator == decimator)
break;
+ }
return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
}
@@ -111,6 +117,13 @@ static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
}
}
+static u8 st_lsm6dsx_get_sip(struct st_lsm6dsx_sensor *sensor, u32 min_odr)
+{
+ u8 sip = sensor->odr / min_odr;
+
+ return sip > 1 ? round_down(sip, 2) : sip;
+}
+
static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_reg *ts_dec_reg;
@@ -131,12 +144,10 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
sensor = iio_priv(hw->iio_devs[i]);
/* update fifo decimators and sample in pattern */
if (hw->enable_mask & BIT(sensor->id)) {
- sensor->sip = sensor->odr / min_odr;
- sensor->decimator = max_odr / sensor->odr;
- data = st_lsm6dsx_get_decimator_val(sensor->decimator);
+ sensor->sip = st_lsm6dsx_get_sip(sensor, min_odr);
+ data = st_lsm6dsx_get_decimator_val(sensor, max_odr);
} else {
sensor->sip = 0;
- sensor->decimator = 0;
data = 0;
}
ts_sip = max_t(u16, ts_sip, sensor->sip);
@@ -176,17 +187,10 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
enum st_lsm6dsx_fifo_mode fifo_mode)
{
unsigned int data;
- int err;
data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
- err = st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
- ST_LSM6DSX_FIFO_MODE_MASK, data);
- if (err < 0)
- return err;
-
- hw->fifo_mode = fifo_mode;
-
- return 0;
+ return st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
+ ST_LSM6DSX_FIFO_MODE_MASK, data);
}
static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
@@ -608,11 +612,17 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
{
struct st_lsm6dsx_hw *hw = sensor->hw;
+ u8 fifo_mask;
int err;
mutex_lock(&hw->conf_lock);
- if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) {
+ if (enable)
+ fifo_mask = hw->fifo_mask | BIT(sensor->id);
+ else
+ fifo_mask = hw->fifo_mask & ~BIT(sensor->id);
+
+ if (hw->fifo_mask) {
err = st_lsm6dsx_flush_fifo(hw);
if (err < 0)
goto out;
@@ -642,15 +652,19 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
if (err < 0)
goto out;
- if (hw->enable_mask) {
+ if (fifo_mask) {
/* reset hw ts counter */
err = st_lsm6dsx_reset_hw_ts(hw);
if (err < 0)
goto out;
err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
+ if (err < 0)
+ goto out;
}
+ hw->fifo_mask = fifo_mask;
+
out:
mutex_unlock(&hw->conf_lock);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 11b2c7bc8041..a7d40c02ce6b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1447,8 +1447,9 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
}
-int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
- bool enable)
+static int
+__st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
+ bool enable)
{
struct st_lsm6dsx_hw *hw = sensor->hw;
u32 odr = enable ? sensor->odr : 0;
@@ -1466,6 +1467,26 @@ int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
return 0;
}
+static int
+st_lsm6dsx_check_events(struct st_lsm6dsx_sensor *sensor, bool enable)
+{
+ struct st_lsm6dsx_hw *hw = sensor->hw;
+
+ if (sensor->id == ST_LSM6DSX_ID_GYRO || enable)
+ return 0;
+
+ return hw->enable_event;
+}
+
+int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
+ bool enable)
+{
+ if (st_lsm6dsx_check_events(sensor, enable))
+ return 0;
+
+ return __st_lsm6dsx_sensor_set_enable(sensor, enable);
+}
+
static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
u8 addr, int *val)
{
@@ -1661,7 +1682,7 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
struct st_lsm6dsx_hw *hw = sensor->hw;
u8 enable_event;
- int err = 0;
+ int err;
if (type != IIO_EV_TYPE_THRESH)
return -EINVAL;
@@ -1689,7 +1710,8 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
return err;
mutex_lock(&hw->conf_lock);
- err = st_lsm6dsx_sensor_set_enable(sensor, state);
+ if (enable_event || !(hw->fifo_mask & BIT(sensor->id)))
+ err = __st_lsm6dsx_sensor_set_enable(sensor, state);
mutex_unlock(&hw->conf_lock);
if (err < 0)
return err;
@@ -2300,7 +2322,7 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
hw->suspend_mask |= BIT(sensor->id);
}
- if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
+ if (hw->fifo_mask)
err = st_lsm6dsx_flush_fifo(hw);
return err;
@@ -2336,7 +2358,7 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
hw->suspend_mask &= ~BIT(sensor->id);
}
- if (hw->enable_mask)
+ if (hw->fifo_mask)
err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
return err;
diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
index ddf47023364b..d39c0d6b77f1 100644
--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -444,8 +444,10 @@ static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
else
temp = __convert_to_raw(temp, resolution);
} else {
- of_property_read_u32_index(np, propname, index,
- (u32 *)&temp);
+ u32 t32;
+
+ of_property_read_u32_index(np, propname, index, &t32);
+ temp = t32;
}
for (j = 0; j < n_size; j++)
diff --git a/drivers/staging/exfat/exfat.h b/drivers/staging/exfat/exfat.h
index 2aac1e000977..51c665a924b7 100644
--- a/drivers/staging/exfat/exfat.h
+++ b/drivers/staging/exfat/exfat.h
@@ -805,8 +805,8 @@ s32 create_dir(struct inode *inode, struct chain_t *p_dir,
s32 create_file(struct inode *inode, struct chain_t *p_dir,
struct uni_name_t *p_uniname, u8 mode, struct file_id_t *fid);
void remove_file(struct inode *inode, struct chain_t *p_dir, s32 entry);
-s32 rename_file(struct inode *inode, struct chain_t *p_dir, s32 old_entry,
- struct uni_name_t *p_uniname, struct file_id_t *fid);
+s32 exfat_rename_file(struct inode *inode, struct chain_t *p_dir, s32 old_entry,
+ struct uni_name_t *p_uniname, struct file_id_t *fid);
s32 move_file(struct inode *inode, struct chain_t *p_olddir, s32 oldentry,
struct chain_t *p_newdir, struct uni_name_t *p_uniname,
struct file_id_t *fid);
diff --git a/drivers/staging/exfat/exfat_core.c b/drivers/staging/exfat/exfat_core.c
index d2d3447083c7..794000e7bc6f 100644
--- a/drivers/staging/exfat/exfat_core.c
+++ b/drivers/staging/exfat/exfat_core.c
@@ -192,8 +192,6 @@ static s32 clr_alloc_bitmap(struct super_block *sb, u32 clu)
exfat_bitmap_clear((u8 *)p_fs->vol_amap[i]->b_data, b);
- return sector_write(sb, sector, p_fs->vol_amap[i], 0);
-
#ifdef CONFIG_EXFAT_DISCARD
if (opts->discard) {
ret = sb_issue_discard(sb, START_SECTOR(clu),
@@ -202,9 +200,13 @@ static s32 clr_alloc_bitmap(struct super_block *sb, u32 clu)
if (ret == -EOPNOTSUPP) {
pr_warn("discard not supported by device, disabling");
opts->discard = 0;
+ } else {
+ return ret;
}
}
#endif /* CONFIG_EXFAT_DISCARD */
+
+ return sector_write(sb, sector, p_fs->vol_amap[i], 0);
}
static u32 test_alloc_bitmap(struct super_block *sb, u32 clu)
@@ -2322,8 +2324,8 @@ void remove_file(struct inode *inode, struct chain_t *p_dir, s32 entry)
fs_func->delete_dir_entry(sb, p_dir, entry, 0, num_entries);
}
-s32 rename_file(struct inode *inode, struct chain_t *p_dir, s32 oldentry,
- struct uni_name_t *p_uniname, struct file_id_t *fid)
+s32 exfat_rename_file(struct inode *inode, struct chain_t *p_dir, s32 oldentry,
+ struct uni_name_t *p_uniname, struct file_id_t *fid)
{
s32 ret, newentry = -1, num_old_entries, num_new_entries;
sector_t sector_old, sector_new;
diff --git a/drivers/staging/exfat/exfat_super.c b/drivers/staging/exfat/exfat_super.c
index 6e481908c59f..9f91853b189b 100644
--- a/drivers/staging/exfat/exfat_super.c
+++ b/drivers/staging/exfat/exfat_super.c
@@ -1262,8 +1262,8 @@ static int ffsMoveFile(struct inode *old_parent_inode, struct file_id_t *fid,
fs_set_vol_flags(sb, VOL_DIRTY);
if (olddir.dir == newdir.dir)
- ret = rename_file(new_parent_inode, &olddir, dentry, &uni_name,
- fid);
+ ret = exfat_rename_file(new_parent_inode, &olddir, dentry,
+ &uni_name, fid);
else
ret = move_file(new_parent_inode, &olddir, dentry, &newdir,
&uni_name, fid);
diff --git a/drivers/staging/fbtft/fb_uc1611.c b/drivers/staging/fbtft/fb_uc1611.c
index e763205e9e4f..f61e373c75e9 100644
--- a/drivers/staging/fbtft/fb_uc1611.c
+++ b/drivers/staging/fbtft/fb_uc1611.c
@@ -63,11 +63,17 @@ static int init_display(struct fbtft_par *par)
{
int ret;
- /* Set CS active high */
- par->spi->mode |= SPI_CS_HIGH;
+ /*
+ * Set CS active inverse polarity: just setting SPI_CS_HIGH does not
+ * work with GPIO based chip selects that are logically active high
+ * but inverted inside the GPIO library, so enforce inverted
+ * semantics.
+ */
+ par->spi->mode ^= SPI_CS_HIGH;
ret = spi_setup(par->spi);
if (ret) {
- dev_err(par->info->device, "Could not set SPI_CS_HIGH\n");
+ dev_err(par->info->device,
+ "Could not set inverse CS polarity\n");
return ret;
}
diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c
index 27cc8eabcbe9..76b25df376b8 100644
--- a/drivers/staging/fbtft/fb_watterott.c
+++ b/drivers/staging/fbtft/fb_watterott.c
@@ -150,10 +150,17 @@ static int init_display(struct fbtft_par *par)
/* enable SPI interface by having CS and MOSI low during reset */
save_mode = par->spi->mode;
- par->spi->mode |= SPI_CS_HIGH;
- ret = spi_setup(par->spi); /* set CS inactive low */
+ /*
+ * Set CS active inverse polarity: just setting SPI_CS_HIGH does not
+ * work with GPIO based chip selects that are logically active high
+ * but inverted inside the GPIO library, so enforce inverted
+ * semantics.
+ */
+ par->spi->mode ^= SPI_CS_HIGH;
+ ret = spi_setup(par->spi);
if (ret) {
- dev_err(par->info->device, "Could not set SPI_CS_HIGH\n");
+ dev_err(par->info->device,
+ "Could not set inverse CS polarity\n");
return ret;
}
write_reg(par, 0x00); /* make sure mode is set */
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index ffb84987dd86..d3e098b41b1a 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -913,7 +913,7 @@ static int fbtft_init_display_from_property(struct fbtft_par *par)
if (count == 0)
return -EINVAL;
- values = kmalloc_array(count, sizeof(*values), GFP_KERNEL);
+ values = kmalloc_array(count + 1, sizeof(*values), GFP_KERNEL);
if (!values)
return -ENOMEM;
@@ -926,9 +926,9 @@ static int fbtft_init_display_from_property(struct fbtft_par *par)
gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
index = -1;
- while (index < count) {
- val = values[++index];
+ val = values[++index];
+ while (index < count) {
if (val & FBTFT_OF_INIT_CMD) {
val &= 0xFFFF;
i = 0;
diff --git a/drivers/staging/hp/Kconfig b/drivers/staging/hp/Kconfig
index fb395cfe6b92..f20ab21a6b2a 100644
--- a/drivers/staging/hp/Kconfig
+++ b/drivers/staging/hp/Kconfig
@@ -6,6 +6,7 @@
config NET_VENDOR_HP
bool "HP devices"
default y
+ depends on ETHERNET
depends on ISA || EISA || PCI
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
diff --git a/drivers/staging/isdn/gigaset/usb-gigaset.c b/drivers/staging/isdn/gigaset/usb-gigaset.c
index 1b9b43659bdf..a20c0bfa68f3 100644
--- a/drivers/staging/isdn/gigaset/usb-gigaset.c
+++ b/drivers/staging/isdn/gigaset/usb-gigaset.c
@@ -571,8 +571,7 @@ static int gigaset_initcshw(struct cardstate *cs)
{
struct usb_cardstate *ucs;
- cs->hw.usb = ucs =
- kmalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
+ cs->hw.usb = ucs = kzalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
if (!ucs) {
pr_err("out of memory\n");
return -ENOMEM;
@@ -584,9 +583,6 @@ static int gigaset_initcshw(struct cardstate *cs)
ucs->bchars[3] = 0;
ucs->bchars[4] = 0x11;
ucs->bchars[5] = 0x13;
- ucs->bulk_out_buffer = NULL;
- ucs->bulk_out_urb = NULL;
- ucs->read_urb = NULL;
tasklet_init(&cs->write_tasklet,
gigaset_modem_fill, (unsigned long) cs);
@@ -685,6 +681,11 @@ static int gigaset_probe(struct usb_interface *interface,
return -ENODEV;
}
+ if (hostif->desc.bNumEndpoints < 2) {
+ dev_err(&interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
/* allocate memory for our device state and initialize it */
@@ -704,6 +705,12 @@ static int gigaset_probe(struct usb_interface *interface,
endpoint = &hostif->endpoint[0].desc;
+ if (!usb_endpoint_is_bulk_out(endpoint)) {
+ dev_err(&interface->dev, "missing bulk-out endpoint\n");
+ retval = -ENODEV;
+ goto error;
+ }
+
buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
ucs->bulk_out_size = buffer_size;
ucs->bulk_out_epnum = usb_endpoint_num(endpoint);
@@ -723,6 +730,12 @@ static int gigaset_probe(struct usb_interface *interface,
endpoint = &hostif->endpoint[1].desc;
+ if (!usb_endpoint_is_int_in(endpoint)) {
+ dev_err(&interface->dev, "missing int-in endpoint\n");
+ retval = -ENODEV;
+ goto error;
+ }
+
ucs->busy = 0;
ucs->read_urb = usb_alloc_urb(0, GFP_KERNEL);
diff --git a/drivers/staging/octeon/Kconfig b/drivers/staging/octeon/Kconfig
index 5319909eb2f6..e7f4ddcc1361 100644
--- a/drivers/staging/octeon/Kconfig
+++ b/drivers/staging/octeon/Kconfig
@@ -3,6 +3,7 @@ config OCTEON_ETHERNET
tristate "Cavium Networks Octeon Ethernet support"
depends on CAVIUM_OCTEON_SOC || COMPILE_TEST
depends on NETDEVICES
+ depends on BROKEN
select PHYLIB
select MDIO_OCTEON
help
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index 4fac9dca798e..a7cac0719b8b 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -70,7 +70,7 @@ static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
phost_conf = pusbd->actconfig;
pconf_desc = &phost_conf->desc;
- phost_iface = &usb_intf->altsetting[0];
+ phost_iface = usb_intf->cur_altsetting;
piface_desc = &phost_iface->desc;
pdvobjpriv->NumInterfaces = pconf_desc->bNumInterfaces;
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index ba1288297ee4..a87562f632a7 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -247,7 +247,7 @@ static uint r8712_usb_dvobj_init(struct _adapter *padapter)
pdvobjpriv->padapter = padapter;
padapter->eeprom_address_size = 6;
- phost_iface = &pintf->altsetting[0];
+ phost_iface = pintf->cur_altsetting;
piface_desc = &phost_iface->desc;
pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints;
if (pusbd->speed == USB_SPEED_HIGH) {
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index 02148a24818a..4458c1e60fa3 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -3309,7 +3309,7 @@ static int __init vchiq_driver_init(void)
return 0;
region_unregister:
- platform_driver_unregister(&vchiq_driver);
+ unregister_chrdev_region(vchiq_devid, 1);
class_destroy:
class_destroy(vchiq_class);
diff --git a/drivers/staging/wlan-ng/Kconfig b/drivers/staging/wlan-ng/Kconfig
index ac136663fa8e..082c16a31616 100644
--- a/drivers/staging/wlan-ng/Kconfig
+++ b/drivers/staging/wlan-ng/Kconfig
@@ -4,6 +4,7 @@ config PRISM2_USB
depends on WLAN && USB && CFG80211
select WIRELESS_EXT
select WEXT_PRIV
+ select CRC32
help
This is the wlan-ng prism 2.5/3 USB driver for a wide range of
old USB wireless devices.