Merge branch 'pm-opp'

* pm-opp:
  PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators()
  PM / OPP: Allow platform specific custom set_opp() callbacks
  PM / OPP: Separate out _generic_set_opp()
  PM / OPP: Add infrastructure to manage multiple regulators
  PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage()
  PM / OPP: Manage supply's voltage/current in a separate structure
  PM / OPP: Don't use OPP structure outside of rcu protected section
  PM / OPP: Reword binding supporting multiple regulators per device
  PM / OPP: Fix incorrect cpu-supply property in binding
  PM / OPP: Pass opp_table to dev_pm_opp_put_regulator()
  PM / OPP: fix debug/error messages in dev_pm_opp_of_get_sharing_cpus()
  PM / OPP: make _of_get_opp_desc_node() a static function

5 files changed, 537 insertions, 182 deletions

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 4c7c6da7a989..35ff06283738 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -93,6 +93,8 @@ struct opp_table *_find_opp_table(struct device *dev)
  * Return: voltage in micro volt corresponding to the opp, else
  * return 0
  *
+ * This is useful only for devices with single power supply.
+ *
  * Locking: This function must be called under rcu_read_lock(). opp is a rcu
  * protected pointer. This means that opp which could have been fetched by
  * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are
@@ -112,7 +114,7 @@ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 	if (IS_ERR_OR_NULL(tmp_opp))
 		pr_err("%s: Invalid parameters\n", __func__);
 	else
-		v = tmp_opp->u_volt;
+		v = tmp_opp->supplies[0].u_volt;
 
 	return v;
 }
@@ -210,6 +212,24 @@ unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency);
 
+static int _get_regulator_count(struct device *dev)
+{
+	struct opp_table *opp_table;
+	int count;
+
+	rcu_read_lock();
+
+	opp_table = _find_opp_table(dev);
+	if (!IS_ERR(opp_table))
+		count = opp_table->regulator_count;
+	else
+		count = 0;
+
+	rcu_read_unlock();
+
+	return count;
+}
+
 /**
  * dev_pm_opp_get_max_volt_latency() - Get max voltage latency in nanoseconds
  * @dev: device for which we do this operation
@@ -222,34 +242,51 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 {
 	struct opp_table *opp_table;
 	struct dev_pm_opp *opp;
-	struct regulator *reg;
+	struct regulator *reg, **regulators;
 	unsigned long latency_ns = 0;
-	unsigned long min_uV = ~0, max_uV = 0;
-	int ret;
+	int ret, i, count;
+	struct {
+		unsigned long min;
+		unsigned long max;
+	} *uV;
+
+	count = _get_regulator_count(dev);
+
+	/* Regulator may not be required for the device */
+	if (!count)
+		return 0;
+
+	regulators = kmalloc_array(count, sizeof(*regulators), GFP_KERNEL);
+	if (!regulators)
+		return 0;
+
+	uV = kmalloc_array(count, sizeof(*uV), GFP_KERNEL);
+	if (!uV)
+		goto free_regulators;
 
 	rcu_read_lock();
 
 	opp_table = _find_opp_table(dev);
 	if (IS_ERR(opp_table)) {
 		rcu_read_unlock();
-		return 0;
+		goto free_uV;
 	}
 
-	reg = opp_table->regulator;
-	if (IS_ERR(reg)) {
-		/* Regulator may not be required for device */
-		rcu_read_unlock();
-		return 0;
-	}
+	memcpy(regulators, opp_table->regulators, count * sizeof(*regulators));
 
-	list_for_each_entry_rcu(opp, &opp_table->opp_list, node) {
-		if (!opp->available)
-			continue;
+	for (i = 0; i < count; i++) {
+		uV[i].min = ~0;
+		uV[i].max = 0;
+
+		list_for_each_entry_rcu(opp, &opp_table->opp_list, node) {
+			if (!opp->available)
+				continue;
 
-		if (opp->u_volt_min < min_uV)
-			min_uV = opp->u_volt_min;
-		if (opp->u_volt_max > max_uV)
-			max_uV = opp->u_volt_max;
+			if (opp->supplies[i].u_volt_min < uV[i].min)
+				uV[i].min = opp->supplies[i].u_volt_min;
+			if (opp->supplies[i].u_volt_max > uV[i].max)
+				uV[i].max = opp->supplies[i].u_volt_max;
+		}
 	}
 
 	rcu_read_unlock();
@@ -258,9 +295,16 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
 	 * The caller needs to ensure that opp_table (and hence the regulator)
 	 * isn't freed, while we are executing this routine.
 	 */
-	ret = regulator_set_voltage_time(reg, min_uV, max_uV);
-	if (ret > 0)
-		latency_ns = ret * 1000;
+	for (i = 0; reg = regulators[i], i < count; i++) {
+		ret = regulator_set_voltage_time(reg, uV[i].min, uV[i].max);
+		if (ret > 0)
+			latency_ns += ret * 1000;
+	}
+
+free_uV:
+	kfree(uV);
+free_regulators:
+	kfree(regulators);
 
 	return latency_ns;
 }
@@ -542,8 +586,7 @@ unlock:
 }
 
 static int _set_opp_voltage(struct device *dev, struct regulator *reg,
-			    unsigned long u_volt, unsigned long u_volt_min,
-			    unsigned long u_volt_max)
+			    struct dev_pm_opp_supply *supply)
 {
 	int ret;
 
@@ -554,14 +597,78 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg,
 		return 0;
 	}
 
-	dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, u_volt_min,
-		u_volt, u_volt_max);
+	dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__,
+		supply->u_volt_min, supply->u_volt, supply->u_volt_max);
 
-	ret = regulator_set_voltage_triplet(reg, u_volt_min, u_volt,
-					    u_volt_max);
+	ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
+					    supply->u_volt, supply->u_volt_max);
 	if (ret)
 		dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n",
-			__func__, u_volt_min, u_volt, u_volt_max, ret);
+			__func__, supply->u_volt_min, supply->u_volt,
+			supply->u_volt_max, ret);
+
+	return ret;
+}
+
+static inline int
+_generic_set_opp_clk_only(struct device *dev, struct clk *clk,
+			  unsigned long old_freq, unsigned long freq)
+{
+	int ret;
+
+	ret = clk_set_rate(clk, freq);
+	if (ret) {
+		dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
+			ret);
+	}
+
+	return ret;
+}
+
+static int _generic_set_opp(struct dev_pm_set_opp_data *data)
+{
+	struct dev_pm_opp_supply *old_supply = data->old_opp.supplies;
+	struct dev_pm_opp_supply *new_supply = data->new_opp.supplies;
+	unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
+	struct regulator *reg = data->regulators[0];
+	struct device *dev= data->dev;
+	int ret;
+
+	/* This function only supports single regulator per device */
+	if (WARN_ON(data->regulator_count > 1)) {
+		dev_err(dev, "multiple regulators are not supported\n");
+		return -EINVAL;
+	}
+
+	/* Scaling up? Scale voltage before frequency */
+	if (freq > old_freq) {
+		ret = _set_opp_voltage(dev, reg, new_supply);
+		if (ret)
+			goto restore_voltage;
+	}
+
+	/* Change frequency */
+	ret = _generic_set_opp_clk_only(dev, data->clk, old_freq, freq);
+	if (ret)
+		goto restore_voltage;
+
+	/* Scaling down? Scale voltage after frequency */
+	if (freq < old_freq) {
+		ret = _set_opp_voltage(dev, reg, new_supply);
+		if (ret)
+			goto restore_freq;
+	}
+
+	return 0;
+
+restore_freq:
+	if (_generic_set_opp_clk_only(dev, data->clk, freq, old_freq))
+		dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
+			__func__, old_freq);
+restore_voltage:
+	/* This shouldn't harm even if the voltages weren't updated earlier */
+	if (old_supply->u_volt)
+		_set_opp_voltage(dev, reg, old_supply);
 
 	return ret;
 }
@@ -579,12 +686,13 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg,
 int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 {
 	struct opp_table *opp_table;
+	unsigned long freq, old_freq;
+	int (*set_opp)(struct dev_pm_set_opp_data *data);
 	struct dev_pm_opp *old_opp, *opp;
-	struct regulator *reg;
+	struct regulator **regulators;
+	struct dev_pm_set_opp_data *data;
 	struct clk *clk;
-	unsigned long freq, old_freq;
-	unsigned long u_volt, u_volt_min, u_volt_max;
-	int ret;
+	int ret, size;
 
 	if (unlikely(!target_freq)) {
 		dev_err(dev, "%s: Invalid target frequency %lu\n", __func__,
@@ -633,55 +741,41 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		return ret;
 	}
 
-	u_volt = opp->u_volt;
-	u_volt_min = opp->u_volt_min;
-	u_volt_max = opp->u_volt_max;
+	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__,
+		old_freq, freq);
 
-	reg = opp_table->regulator;
+	regulators = opp_table->regulators;
 
-	rcu_read_unlock();
-
-	/* Scaling up? Scale voltage before frequency */
-	if (freq > old_freq) {
-		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
-				       u_volt_max);
-		if (ret)
-			goto restore_voltage;
-	}
-
-	/* Change frequency */
-
-	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n",
-		__func__, old_freq, freq);
-
-	ret = clk_set_rate(clk, freq);
-	if (ret) {
-		dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
-			ret);
-		goto restore_voltage;
+	/* Only frequency scaling */
+	if (!regulators) {
+		rcu_read_unlock();
+		return _generic_set_opp_clk_only(dev, clk, old_freq, freq);
 	}
 
-	/* Scaling down? Scale voltage after frequency */
-	if (freq < old_freq) {
-		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
-				       u_volt_max);
-		if (ret)
-			goto restore_freq;
-	}
+	if (opp_table->set_opp)
+		set_opp = opp_table->set_opp;
+	else
+		set_opp = _generic_set_opp;
+
+	data = opp_table->set_opp_data;
+	data->regulators = regulators;
+	data->regulator_count = opp_table->regulator_count;
+	data->clk = clk;
+	data->dev = dev;
+
+	data->old_opp.rate = old_freq;
+	size = sizeof(*opp->supplies) * opp_table->regulator_count;
+	if (IS_ERR(old_opp))
+		memset(data->old_opp.supplies, 0, size);
+	else
+		memcpy(data->old_opp.supplies, old_opp->supplies, size);
 
-	return 0;
+	data->new_opp.rate = freq;
+	memcpy(data->new_opp.supplies, opp->supplies, size);
 
-restore_freq:
-	if (clk_set_rate(clk, old_freq))
-		dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
-			__func__, old_freq);
-restore_voltage:
-	/* This shouldn't harm even if the voltages weren't updated earlier */
-	if (!IS_ERR(old_opp))
-		_set_opp_voltage(dev, reg, old_opp->u_volt,
-				 old_opp->u_volt_min, old_opp->u_volt_max);
+	rcu_read_unlock();
 
-	return ret;
+	return set_opp(data);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate);
 
@@ -764,9 +858,6 @@ static struct opp_table *_add_opp_table(struct device *dev)
 
 	_of_init_opp_table(opp_table, dev);
 
-	/* Set regulator to a non-NULL error value */
-	opp_table->regulator = ERR_PTR(-ENXIO);
-
 	/* Find clk for the device */
 	opp_table->clk = clk_get(dev, NULL);
 	if (IS_ERR(opp_table->clk)) {
@@ -815,7 +906,10 @@ static void _remove_opp_table(struct opp_table *opp_table)
 	if (opp_table->prop_name)
 		return;
 
-	if (!IS_ERR(opp_table->regulator))
+	if (opp_table->regulators)
+		return;
+
+	if (opp_table->set_opp)
 		return;
 
 	/* Release clk */
@@ -924,34 +1018,50 @@ struct dev_pm_opp *_allocate_opp(struct device *dev,
 				 struct opp_table **opp_table)
 {
 	struct dev_pm_opp *opp;
+	int count, supply_size;
+	struct opp_table *table;
 
-	/* allocate new OPP node */
-	opp = kzalloc(sizeof(*opp), GFP_KERNEL);
-	if (!opp)
+	table = _add_opp_table(dev);
+	if (!table)
 		return NULL;
 
-	INIT_LIST_HEAD(&opp->node);
+	/* Allocate space for at least one supply */
+	count = table->regulator_count ? table->regulator_count : 1;
+	supply_size = sizeof(*opp->supplies) * count;
 
-	*opp_table = _add_opp_table(dev);
-	if (!*opp_table) {
-		kfree(opp);
+	/* allocate new OPP node and supplies structures */
+	opp = kzalloc(sizeof(*opp) + supply_size, GFP_KERNEL);
+	if (!opp) {
+		kfree(table);
 		return NULL;
 	}
 
+	/* Put the supplies at the end of the OPP structure as an empty array */
+	opp->supplies = (struct dev_pm_opp_supply *)(opp + 1);
+	INIT_LIST_HEAD(&opp->node);
+
+	*opp_table = table;
+
 	return opp;
 }
 
 static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
 					 struct opp_table *opp_table)
 {
-	struct regulator *reg = opp_table->regulator;
-
-	if (!IS_ERR(reg) &&
-	    !regulator_is_supported_voltage(reg, opp->u_volt_min,
-					    opp->u_volt_max)) {
-		pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
-			__func__, opp->u_volt_min, opp->u_volt_max);
-		return false;
+	struct regulator *reg;
+	int i;
+
+	for (i = 0; i < opp_table->regulator_count; i++) {
+		reg = opp_table->regulators[i];
+
+		if (!regulator_is_supported_voltage(reg,
+					opp->supplies[i].u_volt_min,
+					opp->supplies[i].u_volt_max)) {
+			pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
+				__func__, opp->supplies[i].u_volt_min,
+				opp->supplies[i].u_volt_max);
+			return false;
+		}
 	}
 
 	return true;
@@ -983,11 +1093,13 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 
 		/* Duplicate OPPs */
 		dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
-			 __func__, opp->rate, opp->u_volt, opp->available,
-			 new_opp->rate, new_opp->u_volt, new_opp->available);
+			 __func__, opp->rate, opp->supplies[0].u_volt,
+			 opp->available, new_opp->rate,
+			 new_opp->supplies[0].u_volt, new_opp->available);
 
-		return opp->available && new_opp->u_volt == opp->u_volt ?
-			0 : -EEXIST;
+		/* Should we compare voltages for all regulators here ? */
+		return opp->available &&
+		       new_opp->supplies[0].u_volt == opp->supplies[0].u_volt ? 0 : -EEXIST;
 	}
 
 	new_opp->opp_table = opp_table;
@@ -1054,9 +1166,9 @@ int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
 	/* populate the opp table */
 	new_opp->rate = freq;
 	tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
-	new_opp->u_volt = u_volt;
-	new_opp->u_volt_min = u_volt - tol;
-	new_opp->u_volt_max = u_volt + tol;
+	new_opp->supplies[0].u_volt = u_volt;
+	new_opp->supplies[0].u_volt_min = u_volt - tol;
+	new_opp->supplies[0].u_volt_max = u_volt + tol;
 	new_opp->available = true;
 	new_opp->dynamic = dynamic;
 
@@ -1300,13 +1412,47 @@ unlock:
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
 
+static int _allocate_set_opp_data(struct opp_table *opp_table)
+{
+	struct dev_pm_set_opp_data *data;
+	int len, count = opp_table->regulator_count;
+
+	if (WARN_ON(!count))
+		return -EINVAL;
+
+	/* space for set_opp_data */
+	len = sizeof(*data);
+
+	/* space for old_opp.supplies and new_opp.supplies */
+	len += 2 * sizeof(struct dev_pm_opp_supply) * count;
+
+	data = kzalloc(len, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->old_opp.supplies = (void *)(data + 1);
+	data->new_opp.supplies = data->old_opp.supplies + count;
+
+	opp_table->set_opp_data = data;
+
+	return 0;
+}
+
+static void _free_set_opp_data(struct opp_table *opp_table)
+{
+	kfree(opp_table->set_opp_data);
+	opp_table->set_opp_data = NULL;
+}
+
 /**
- * dev_pm_opp_set_regulator() - Set regulator name for the device
+ * dev_pm_opp_set_regulators() - Set regulator names for the device
  * @dev: Device for which regulator name is being set.
- * @name: Name of the regulator.
+ * @names: Array of pointers to the names of the regulator.
+ * @count: Number of regulators.
  *
  * In order to support OPP switching, OPP layer needs to know the name of the
- * device's regulator, as the core would be required to switch voltages as well.
+ * device's regulators, as the core would be required to switch voltages as
+ * well.
  *
  * This must be called before any OPPs are initialized for the device.
  *
@@ -1316,11 +1462,13 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
  */
-int dev_pm_opp_set_regulator(struct device *dev, const char *name)
+struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
+					    const char * const names[],
+					    unsigned int count)
 {
 	struct opp_table *opp_table;
 	struct regulator *reg;
-	int ret;
+	int ret, i;
 
 	mutex_lock(&opp_table_lock);
 
@@ -1336,22 +1484,146 @@ int dev_pm_opp_set_regulator(struct device *dev, const char *name)
 		goto err;
 	}
 
-	/* Already have a regulator set */
-	if (WARN_ON(!IS_ERR(opp_table->regulator))) {
+	/* Already have regulators set */
+	if (opp_table->regulators) {
 		ret = -EBUSY;
 		goto err;
 	}
-	/* Allocate the regulator */
-	reg = regulator_get_optional(dev, name);
-	if (IS_ERR(reg)) {
-		ret = PTR_ERR(reg);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "%s: no regulator (%s) found: %d\n",
-				__func__, name, ret);
+
+	opp_table->regulators = kmalloc_array(count,
+					      sizeof(*opp_table->regulators),
+					      GFP_KERNEL);
+	if (!opp_table->regulators) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	for (i = 0; i < count; i++) {
+		reg = regulator_get_optional(dev, names[i]);
+		if (IS_ERR(reg)) {
+			ret = PTR_ERR(reg);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "%s: no regulator (%s) found: %d\n",
+					__func__, names[i], ret);
+			goto free_regulators;
+		}
+
+		opp_table->regulators[i] = reg;
+	}
+
+	opp_table->regulator_count = count;
+
+	/* Allocate block only once to pass to set_opp() routines */
+	ret = _allocate_set_opp_data(opp_table);
+	if (ret)
+		goto free_regulators;
+
+	mutex_unlock(&opp_table_lock);
+	return opp_table;
+
+free_regulators:
+	while (i != 0)
+		regulator_put(opp_table->regulators[--i]);
+
+	kfree(opp_table->regulators);
+	opp_table->regulators = NULL;
+	opp_table->regulator_count = 0;
+err:
+	_remove_opp_table(opp_table);
+unlock:
+	mutex_unlock(&opp_table_lock);
+
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulators);
+
+/**
+ * dev_pm_opp_put_regulators() - Releases resources blocked for regulator
+ * @opp_table: OPP table returned from dev_pm_opp_set_regulators().
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_put_regulators(struct opp_table *opp_table)
+{
+	int i;
+
+	mutex_lock(&opp_table_lock);
+
+	if (!opp_table->regulators) {
+		pr_err("%s: Doesn't have regulators set\n", __func__);
+		goto unlock;
+	}
+
+	/* Make sure there are no concurrent readers while updating opp_table */
+	WARN_ON(!list_empty(&opp_table->opp_list));
+
+	for (i = opp_table->regulator_count - 1; i >= 0; i--)
+		regulator_put(opp_table->regulators[i]);
+
+	_free_set_opp_data(opp_table);
+
+	kfree(opp_table->regulators);
+	opp_table->regulators = NULL;
+	opp_table->regulator_count = 0;
+
+	/* Try freeing opp_table if this was the last blocking resource */
+	_remove_opp_table(opp_table);
+
+unlock:
+	mutex_unlock(&opp_table_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulators);
+
+/**
+ * dev_pm_opp_register_set_opp_helper() - Register custom set OPP helper
+ * @dev: Device for which the helper is getting registered.
+ * @set_opp: Custom set OPP helper.
+ *
+ * This is useful to support complex platforms (like platforms with multiple
+ * regulators per device), instead of the generic OPP set rate helper.
+ *
+ * This must be called before any OPPs are initialized for the device.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_register_set_opp_helper(struct device *dev,
+			int (*set_opp)(struct dev_pm_set_opp_data *data))
+{
+	struct opp_table *opp_table;
+	int ret;
+
+	if (!set_opp)
+		return -EINVAL;
+
+	mutex_lock(&opp_table_lock);
+
+	opp_table = _add_opp_table(dev);
+	if (!opp_table) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	/* This should be called before OPPs are initialized */
+	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
+		ret = -EBUSY;
 		goto err;
 	}
 
-	opp_table->regulator = reg;
+	/* Already have custom set_opp helper */
+	if (WARN_ON(opp_table->set_opp)) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	opp_table->set_opp = set_opp;
 
 	mutex_unlock(&opp_table_lock);
 	return 0;
@@ -1363,11 +1635,12 @@ unlock:
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator);
+EXPORT_SYMBOL_GPL(dev_pm_opp_register_set_opp_helper);
 
 /**
- * dev_pm_opp_put_regulator() - Releases resources blocked for regulator
- * @dev: Device for which regulator was set.
+ * dev_pm_opp_register_put_opp_helper() - Releases resources blocked for
+ *					   set_opp helper
+ * @dev: Device for which custom set_opp helper has to be cleared.
  *
  * Locking: The internal opp_table and opp structures are RCU protected.
  * Hence this function internally uses RCU updater strategy with mutex locks
@@ -1375,7 +1648,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator);
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
  */
-void dev_pm_opp_put_regulator(struct device *dev)
+void dev_pm_opp_register_put_opp_helper(struct device *dev)
 {
 	struct opp_table *opp_table;
 
@@ -1389,16 +1662,16 @@ void dev_pm_opp_put_regulator(struct device *dev)
 		goto unlock;
 	}
 
-	if (IS_ERR(opp_table->regulator)) {
-		dev_err(dev, "%s: Doesn't have regulator set\n", __func__);
+	if (!opp_table->set_opp) {
+		dev_err(dev, "%s: Doesn't have custom set_opp helper set\n",
+			__func__);
 		goto unlock;
 	}
 
 	/* Make sure there are no concurrent readers while updating opp_table */
 	WARN_ON(!list_empty(&opp_table->opp_list));
 
-	regulator_put(opp_table->regulator);
-	opp_table->regulator = ERR_PTR(-ENXIO);
+	opp_table->set_opp = NULL;
 
 	/* Try freeing opp_table if this was the last blocking resource */
 	_remove_opp_table(opp_table);
@@ -1406,7 +1679,7 @@ void dev_pm_opp_put_regulator(struct device *dev)
 unlock:
 	mutex_unlock(&opp_table_lock);
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);
+EXPORT_SYMBOL_GPL(dev_pm_opp_register_put_opp_helper);
 
 /**
  * dev_pm_opp_add()  - Add an OPP table from a table definitions
diff --git a/drivers/base/power/opp/debugfs.c b/drivers/base/power/opp/debugfs.c
index ef1ae6b52042..95f433db4ac7 100644
--- a/drivers/base/power/opp/debugfs.c
+++ b/drivers/base/power/opp/debugfs.c
@@ -15,6 +15,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/limits.h>
+#include <linux/slab.h>
 
 #include "opp.h"
 
@@ -34,6 +35,46 @@ void opp_debug_remove_one(struct dev_pm_opp *opp)
 	debugfs_remove_recursive(opp->dentry);
 }
 
+static bool opp_debug_create_supplies(struct dev_pm_opp *opp,
+				      struct opp_table *opp_table,
+				      struct dentry *pdentry)
+{
+	struct dentry *d;
+	int i = 0;
+	char *name;
+
+	/* Always create at least supply-0 directory */
+	do {
+		name = kasprintf(GFP_KERNEL, "supply-%d", i);
+
+		/* Create per-opp directory */
+		d = debugfs_create_dir(name, pdentry);
+
+		kfree(name);
+
+		if (!d)
+			return false;
+
+		if (!debugfs_create_ulong("u_volt_target", S_IRUGO, d,
+					  &opp->supplies[i].u_volt))
+			return false;
+
+		if (!debugfs_create_ulong("u_volt_min", S_IRUGO, d,
+					  &opp->supplies[i].u_volt_min))
+			return false;
+
+		if (!debugfs_create_ulong("u_volt_max", S_IRUGO, d,
+					  &opp->supplies[i].u_volt_max))
+			return false;
+
+		if (!debugfs_create_ulong("u_amp", S_IRUGO, d,
+					  &opp->supplies[i].u_amp))
+			return false;
+	} while (++i < opp_table->regulator_count);
+
+	return true;
+}
+
 int opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
 {
 	struct dentry *pdentry = opp_table->dentry;
@@ -63,16 +104,7 @@ int opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
 	if (!debugfs_create_ulong("rate_hz", S_IRUGO, d, &opp->rate))
 		return -ENOMEM;
 
-	if (!debugfs_create_ulong("u_volt_target", S_IRUGO, d, &opp->u_volt))
-		return -ENOMEM;
-
-	if (!debugfs_create_ulong("u_volt_min", S_IRUGO, d, &opp->u_volt_min))
-		return -ENOMEM;
-
-	if (!debugfs_create_ulong("u_volt_max", S_IRUGO, d, &opp->u_volt_max))
-		return -ENOMEM;
-
-	if (!debugfs_create_ulong("u_amp", S_IRUGO, d, &opp->u_amp))
+	if (!opp_debug_create_supplies(opp, opp_table, d))
 		return -ENOMEM;
 
 	if (!debugfs_create_ulong("clock_latency_ns", S_IRUGO, d,
diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c
index 5552211e6fcd..3f7d2591b173 100644
--- a/drivers/base/power/opp/of.c
+++ b/drivers/base/power/opp/of.c
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/device.h>
 #include <linux/of.h>
+#include <linux/slab.h>
 #include <linux/export.h>
 
 #include "opp.h"
@@ -101,16 +102,16 @@ static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
 	return true;
 }
 
-/* TODO: Support multiple regulators */
 static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 			      struct opp_table *opp_table)
 {
-	u32 microvolt[3] = {0};
-	u32 val;
-	int count, ret;
+	u32 *microvolt, *microamp = NULL;
+	int supplies, vcount, icount, ret, i, j;
 	struct property *prop = NULL;
 	char name[NAME_MAX];
 
+	supplies = opp_table->regulator_count ? opp_table->regulator_count : 1;
+
 	/* Search for "opp-microvolt-<name>" */
 	if (opp_table->prop_name) {
 		snprintf(name, sizeof(name), "opp-microvolt-%s",
@@ -128,34 +129,29 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 			return 0;
 	}
 
-	count = of_property_count_u32_elems(opp->np, name);
-	if (count < 0) {
+	vcount = of_property_count_u32_elems(opp->np, name);
+	if (vcount < 0) {
 		dev_err(dev, "%s: Invalid %s property (%d)\n",
-			__func__, name, count);
-		return count;
+			__func__, name, vcount);
+		return vcount;
 	}
 
-	/* There can be one or three elements here */
-	if (count != 1 && count != 3) {
-		dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
-			__func__, name, count);
+	/* There can be one or three elements per supply */
+	if (vcount != supplies && vcount != supplies * 3) {
+		dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n",
+			__func__, name, vcount, supplies);
 		return -EINVAL;
 	}
 
-	ret = of_property_read_u32_array(opp->np, name, microvolt, count);
+	microvolt = kmalloc_array(vcount, sizeof(*microvolt), GFP_KERNEL);
+	if (!microvolt)
+		return -ENOMEM;
+
+	ret = of_property_read_u32_array(opp->np, name, microvolt, vcount);
 	if (ret) {
 		dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
-		return -EINVAL;
-	}
-
-	opp->u_volt = microvolt[0];
-
-	if (count == 1) {
-		opp->u_volt_min = opp->u_volt;
-		opp->u_volt_max = opp->u_volt;
-	} else {
-		opp->u_volt_min = microvolt[1];
-		opp->u_volt_max = microvolt[2];
+		ret = -EINVAL;
+		goto free_microvolt;
 	}
 
 	/* Search for "opp-microamp-<name>" */
@@ -172,10 +168,59 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 		prop = of_find_property(opp->np, name, NULL);
 	}
 
-	if (prop && !of_property_read_u32(opp->np, name, &val))
-		opp->u_amp = val;
+	if (prop) {
+		icount = of_property_count_u32_elems(opp->np, name);
+		if (icount < 0) {
+			dev_err(dev, "%s: Invalid %s property (%d)\n", __func__,
+				name, icount);
+			ret = icount;
+			goto free_microvolt;
+		}
 
-	return 0;
+		if (icount != supplies) {
+			dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n",
+				__func__, name, icount, supplies);
+			ret = -EINVAL;
+			goto free_microvolt;
+		}
+
+		microamp = kmalloc_array(icount, sizeof(*microamp), GFP_KERNEL);
+		if (!microamp) {
+			ret = -EINVAL;
+			goto free_microvolt;
+		}
+
+		ret = of_property_read_u32_array(opp->np, name, microamp,
+						 icount);
+		if (ret) {
+			dev_err(dev, "%s: error parsing %s: %d\n", __func__,
+				name, ret);
+			ret = -EINVAL;
+			goto free_microamp;
+		}
+	}
+
+	for (i = 0, j = 0; i < supplies; i++) {
+		opp->supplies[i].u_volt = microvolt[j++];
+
+		if (vcount == supplies) {
+			opp->supplies[i].u_volt_min = opp->supplies[i].u_volt;
+			opp->supplies[i].u_volt_max = opp->supplies[i].u_volt;
+		} else {
+			opp->supplies[i].u_volt_min = microvolt[j++];
+			opp->supplies[i].u_volt_max = microvolt[j++];
+		}
+
+		if (microamp)
+			opp->supplies[i].u_amp = microamp[i];
+	}
+
+free_microamp:
+	kfree(microamp);
+free_microvolt:
+	kfree(microvolt);
+
+	return ret;
 }
 
 /**
@@ -198,7 +243,7 @@ void dev_pm_opp_of_remove_table(struct device *dev)
 EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
 
 /* Returns opp descriptor node for a device, caller must do of_node_put() */
-struct device_node *_of_get_opp_desc_node(struct device *dev)
+static struct device_node *_of_get_opp_desc_node(struct device *dev)
 {
 	/*
 	 * TODO: Support for multiple OPP tables.
@@ -303,9 +348,9 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np)
 	mutex_unlock(&opp_table_lock);
 
 	pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
-		 __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt,
-		 new_opp->u_volt_min, new_opp->u_volt_max,
-		 new_opp->clock_latency_ns);
+		 __func__, new_opp->turbo, new_opp->rate,
+		 new_opp->supplies[0].u_volt, new_opp->supplies[0].u_volt_min,
+		 new_opp->supplies[0].u_volt_max, new_opp->clock_latency_ns);
 
 	/*
 	 * Notify the changes in the availability of the operable
@@ -562,7 +607,7 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev,
 	/* Get OPP descriptor node */
 	np = _of_get_opp_desc_node(cpu_dev);
 	if (!np) {
-		dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__);
+		dev_dbg(cpu_dev, "%s: Couldn't find opp node.\n", __func__);
 		return -ENOENT;
 	}
 
@@ -587,7 +632,7 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev,
 		/* Get OPP descriptor node */
 		tmp_np = _of_get_opp_desc_node(tcpu_dev);
 		if (!tmp_np) {
-			dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n",
+			dev_err(tcpu_dev, "%s: Couldn't find opp node.\n",
 				__func__);
 			ret = -ENOENT;
 			goto put_cpu_node;
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index fabd5ca1a083..af9f2b849a66 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -61,10 +61,7 @@ extern struct list_head opp_tables;
  * @turbo:	true if turbo (boost) OPP
  * @suspend:	true if suspend OPP
  * @rate:	Frequency in hertz
- * @u_volt:	Target voltage in microvolts corresponding to this OPP
- * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
- * @u_volt_max:	Maximum voltage in microvolts corresponding to this OPP
- * @u_amp:	Maximum current drawn by the device in microamperes
+ * @supplies:	Power supplies voltage/current values
  * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
  *		frequency from any other OPP's frequency.
  * @opp_table:	points back to the opp_table struct this opp belongs to
@@ -83,10 +80,8 @@ struct dev_pm_opp {
 	bool suspend;
 	unsigned long rate;
 
-	unsigned long u_volt;
-	unsigned long u_volt_min;
-	unsigned long u_volt_max;
-	unsigned long u_amp;
+	struct dev_pm_opp_supply *supplies;
+
 	unsigned long clock_latency_ns;
 
 	struct opp_table *opp_table;
@@ -144,7 +139,10 @@ enum opp_table_access {
  * @supported_hw_count: Number of elements in supported_hw array.
  * @prop_name: A name to postfix to many DT properties, while parsing them.
  * @clk: Device's clock handle
- * @regulator: Supply regulator
+ * @regulators: Supply regulators
+ * @regulator_count: Number of power supply regulators
+ * @set_opp: Platform specific set_opp callback
+ * @set_opp_data: Data to be passed to set_opp callback
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
@@ -179,7 +177,11 @@ struct opp_table {
 	unsigned int supported_hw_count;
 	const char *prop_name;
 	struct clk *clk;
-	struct regulator *regulator;
+	struct regulator **regulators;
+	unsigned int regulator_count;
+
+	int (*set_opp)(struct dev_pm_set_opp_data *data);
+	struct dev_pm_set_opp_data *set_opp_data;
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dentry;
@@ -190,7 +192,6 @@ struct opp_table {
 /* Routines internal to opp core */
 struct opp_table *_find_opp_table(struct device *dev);
 struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table);
-struct device_node *_of_get_opp_desc_node(struct device *dev);
 void _dev_pm_opp_remove_table(struct device *dev, bool remove_all);
 struct dev_pm_opp *_allocate_opp(struct device *dev, struct opp_table **opp_table);
 int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table);
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 5c07ae05d69a..269013311e79 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -28,6 +28,7 @@
 #include "cpufreq-dt.h"
 
 struct private_data {
+	struct opp_table *opp_table;
 	struct device *cpu_dev;
 	struct thermal_cooling_device *cdev;
 	const char *reg_name;
@@ -143,6 +144,7 @@ static int resources_available(void)
 static int cpufreq_init(struct cpufreq_policy *policy)
 {
 	struct cpufreq_frequency_table *freq_table;
+	struct opp_table *opp_table = NULL;
 	struct private_data *priv;
 	struct device *cpu_dev;
 	struct clk *cpu_clk;
@@ -186,8 +188,9 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 */
 	name = find_supply_name(cpu_dev);
 	if (name) {
-		ret = dev_pm_opp_set_regulator(cpu_dev, name);
-		if (ret) {
+		opp_table = dev_pm_opp_set_regulators(cpu_dev, &name, 1);
+		if (IS_ERR(opp_table)) {
+			ret = PTR_ERR(opp_table);
 			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
 				policy->cpu, ret);
 			goto out_put_clk;
@@ -237,6 +240,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	priv->reg_name = name;
+	priv->opp_table = opp_table;
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
@@ -285,7 +289,7 @@ out_free_priv:
 out_free_opp:
 	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
 	if (name)
-		dev_pm_opp_put_regulator(cpu_dev);
+		dev_pm_opp_put_regulators(opp_table);
 out_put_clk:
 	clk_put(cpu_clk);
 
@@ -300,7 +304,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
 	if (priv->reg_name)
-		dev_pm_opp_put_regulator(priv->cpu_dev);
+		dev_pm_opp_put_regulators(priv->opp_table);
 
 	clk_put(policy->clk);
 	kfree(priv);