diff options
| author | David Woodhouse <dwmw2@infradead.org> | 2007-01-01 19:31:15 +0000 |
|---|---|---|
| committer | Jeff Garzik <jeff@garzik.org> | 2007-01-26 17:27:40 -0500 |
| commit | 8cdf92a98fa0f91068615443f2a8597b7f2c34ca (patch) | |
| tree | c33ae8216599533068dbcf2ef46c19a1f5b942a9 /drivers | |
| parent | dfd7a3db3898e299bdc25f0c77081a8632b3a73c (diff) | |
| download | linux-8cdf92a98fa0f91068615443f2a8597b7f2c34ca.tar.bz2 | |
Fix Maple PATA IRQ assignment.
On the Maple board, the AMD8111 IDE is in legacy mode... except that it
appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by
the architecture's "pci_get_legacy_ide_irq()" function, but in libata we
just hard-code the numbers 14 and 15.
This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as
appropriate, having added a pci_dev argument to the
ATA_{PRIM,SECOND}ARY_IRQ macros.
There's probably a better way to do this -- especially if we observe
that the _only_ case in which this seemingly-generic
"pci_get_legacy_ide_irq()" function returns anything other than 14 and
15 for primary and secondary respectively is the case of the AMD8111 on
the Maple board -- couldn't we handle that with a special case in the
pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into
native mode during early boot and assign resources properly?
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ata/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/ata/libata-sff.c | 6 |
2 files changed, 7 insertions, 3 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index da21552d2b1c..1c94b43d2c9b 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -19,6 +19,10 @@ config ATA if ATA +config ATA_NONSTANDARD + bool + default n + config SATA_AHCI tristate "AHCI SATA support" depends on PCI diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 942aeba2940a..12c88c588039 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -917,7 +917,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, probe_ent->irq_flags = IRQF_SHARED; if (port_mask & ATA_PORT_PRIMARY) { - probe_ent->irq = ATA_PRIMARY_IRQ; + probe_ent->irq = ATA_PRIMARY_IRQ(pdev); probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD; probe_ent->port[0].altstatus_addr = probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL; @@ -933,9 +933,9 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, if (port_mask & ATA_PORT_SECONDARY) { if (probe_ent->irq) - probe_ent->irq2 = ATA_SECONDARY_IRQ; + probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev); else - probe_ent->irq = ATA_SECONDARY_IRQ; + probe_ent->irq = ATA_SECONDARY_IRQ(pdev); probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD; probe_ent->port[1].altstatus_addr = probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL; |