Merge branch 'fixes' into next

3 files changed, 92 insertions, 7 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 6db36dc870b5..9020cb2490f7 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -144,8 +144,9 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 	int err = cmd->error;
 
 	/* Flag re-tuning needed on CRC errors */
-	if ((cmd->opcode != MMC_SEND_TUNING_BLOCK &&
-	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
+	if (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
+	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
+	    !host->retune_crc_disable &&
 	    (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
 	    (mrq->data && mrq->data->error == -EILSEQ) ||
 	    (mrq->stop && mrq->stop->error == -EILSEQ)))
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index f79f0b0caab8..2ba00acf64e6 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -15,6 +15,7 @@
 #include "sdio_ops.h"
 #include "core.h"
 #include "card.h"
+#include "host.h"
 
 /**
  *	sdio_claim_host - exclusively claim a bus for a certain SDIO function
@@ -734,3 +735,79 @@ int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags);
+
+/**
+ *	sdio_retune_crc_disable - temporarily disable retuning on CRC errors
+ *	@func: SDIO function attached to host
+ *
+ *	If the SDIO card is known to be in a state where it might produce
+ *	CRC errors on the bus in response to commands (like if we know it is
+ *	transitioning between power states), an SDIO function driver can
+ *	call this function to temporarily disable the SD/MMC core behavior of
+ *	triggering an automatic retuning.
+ *
+ *	This function should be called while the host is claimed and the host
+ *	should remain claimed until sdio_retune_crc_enable() is called.
+ *	Specifically, the expected sequence of calls is:
+ *	- sdio_claim_host()
+ *	- sdio_retune_crc_disable()
+ *	- some number of calls like sdio_writeb() and sdio_readb()
+ *	- sdio_retune_crc_enable()
+ *	- sdio_release_host()
+ */
+void sdio_retune_crc_disable(struct sdio_func *func)
+{
+	func->card->host->retune_crc_disable = true;
+}
+EXPORT_SYMBOL_GPL(sdio_retune_crc_disable);
+
+/**
+ *	sdio_retune_crc_enable - re-enable retuning on CRC errors
+ *	@func: SDIO function attached to host
+ *
+ *	This is the compement to sdio_retune_crc_disable().
+ */
+void sdio_retune_crc_enable(struct sdio_func *func)
+{
+	func->card->host->retune_crc_disable = false;
+}
+EXPORT_SYMBOL_GPL(sdio_retune_crc_enable);
+
+/**
+ *	sdio_retune_hold_now - start deferring retuning requests till release
+ *	@func: SDIO function attached to host
+ *
+ *	This function can be called if it's currently a bad time to do
+ *	a retune of the SDIO card.  Retune requests made during this time
+ *	will be held and we'll actually do the retune sometime after the
+ *	release.
+ *
+ *	This function could be useful if an SDIO card is in a power state
+ *	where it can respond to a small subset of commands that doesn't
+ *	include the retuning command.  Care should be taken when using
+ *	this function since (presumably) the retuning request we might be
+ *	deferring was made for a good reason.
+ *
+ *	This function should be called while the host is claimed.
+ */
+void sdio_retune_hold_now(struct sdio_func *func)
+{
+	mmc_retune_hold_now(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_hold_now);
+
+/**
+ *	sdio_retune_release - signal that it's OK to retune now
+ *	@func: SDIO function attached to host
+ *
+ *	This is the complement to sdio_retune_hold_now().  Calling this
+ *	function won't make a retune happen right away but will allow
+ *	them to be scheduled normally.
+ *
+ *	This function should be called while the host is claimed.
+ */
+void sdio_retune_release(struct sdio_func *func)
+{
+	mmc_retune_release(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_release);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 22b73da42822..9a51f1ba87c3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -678,6 +678,12 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 
 	brcmf_dbg(TRACE, "Enter: on=%d\n", on);
 
+	sdio_retune_crc_disable(bus->sdiodev->func1);
+
+	/* Cannot re-tune if device is asleep; defer till we're awake */
+	if (on)
+		sdio_retune_hold_now(bus->sdiodev->func1);
+
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
@@ -738,6 +744,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 	if (try_cnt > MAX_KSO_ATTEMPTS)
 		brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
 
+	if (on)
+		sdio_retune_release(bus->sdiodev->func1);
+
+	sdio_retune_crc_enable(bus->sdiodev->func1);
+
 	return err;
 }
 
@@ -3375,11 +3386,7 @@ err:
 
 static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus)
 {
-	if (bus->ci->chip == CY_CC_43012_CHIP_ID ||
-	    bus->ci->chip == CY_CC_4373_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4339_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4345_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4354_CHIP_ID)
+	if (bus->ci->chip == CY_CC_43012_CHIP_ID)
 		return true;
 	else
 		return false;