diff options
author | James Hogan <jhogan@kernel.org> | 2018-02-21 15:31:32 +0000 |
---|---|---|
committer | James Hogan <jhogan@kernel.org> | 2018-02-23 14:30:20 +0000 |
commit | df46bb1909d92eedccd4216c88e43f75cb0b2901 (patch) | |
tree | fa4d6dd3db384648abf7a9662039f078389cbb89 /drivers | |
parent | 5f171577b4f35b44795a73bde8cf2c49b4073925 (diff) | |
download | linux-df46bb1909d92eedccd4216c88e43f75cb0b2901.tar.bz2 |
irqchip: Remove metag irqchip drivers
Now that arch/metag/ has been removed, remove the two metag irqchip
drivers. They are of no value without the architecture code.
- irq-metag: Meta internal (HWSTATMETA) interrupt code.
- irq-metag-ext: Meta External interrupt code.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-metag@vger.kernel.org
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/irqchip/Makefile | 2 | ||||
-rw-r--r-- | drivers/irqchip/irq-metag-ext.c | 871 | ||||
-rw-r--r-- | drivers/irqchip/irq-metag.c | 343 |
3 files changed, 0 insertions, 1216 deletions
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index d27e3e3619e0..b5b1f4c93413 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -15,8 +15,6 @@ obj-$(CONFIG_IRQ_MXS) += irq-mxs.o obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o -obj-$(CONFIG_METAG) += irq-metag-ext.o -obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o obj-$(CONFIG_OMPIC) += irq-ompic.o obj-$(CONFIG_OR1K_PIC) += irq-or1k-pic.o diff --git a/drivers/irqchip/irq-metag-ext.c b/drivers/irqchip/irq-metag-ext.c deleted file mode 100644 index e67483161f0f..000000000000 --- a/drivers/irqchip/irq-metag-ext.c +++ /dev/null @@ -1,871 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Meta External interrupt code. - * - * Copyright (C) 2005-2012 Imagination Technologies Ltd. - * - * External interrupts on Meta are configured at two-levels, in the CPU core and - * in the external trigger block. Interrupts from SoC peripherals are - * multiplexed onto a single Meta CPU "trigger" - traditionally it has always - * been trigger 2 (TR2). For info on how de-multiplexing happens check out - * meta_intc_irq_demux(). - */ - -#include <linux/interrupt.h> -#include <linux/irqchip/metag-ext.h> -#include <linux/irqdomain.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/syscore_ops.h> - -#include <asm/irq.h> -#include <asm/hwthread.h> - -#define HWSTAT_STRIDE 8 -#define HWVEC_BLK_STRIDE 0x1000 - -/** - * struct meta_intc_priv - private meta external interrupt data - * @nr_banks: Number of interrupt banks - * @domain: IRQ domain for all banks of external IRQs - * @unmasked: Record of unmasked IRQs - * @levels_altered: Record of altered level bits - */ -struct meta_intc_priv { - unsigned int nr_banks; - struct irq_domain *domain; - - unsigned long unmasked[4]; - -#ifdef CONFIG_METAG_SUSPEND_MEM - unsigned long levels_altered[4]; -#endif -}; - -/* Private data for the one and only external interrupt controller */ -static struct meta_intc_priv meta_intc_priv; - -/** - * meta_intc_offset() - Get the offset into the bank of a hardware IRQ number - * @hw: Hardware IRQ number (within external trigger block) - * - * Returns: Bit offset into the IRQ's bank registers - */ -static unsigned int meta_intc_offset(irq_hw_number_t hw) -{ - return hw & 0x1f; -} - -/** - * meta_intc_bank() - Get the bank number of a hardware IRQ number - * @hw: Hardware IRQ number (within external trigger block) - * - * Returns: Bank number indicating which register the IRQ's bits are - */ -static unsigned int meta_intc_bank(irq_hw_number_t hw) -{ - return hw >> 5; -} - -/** - * meta_intc_stat_addr() - Get the address of a HWSTATEXT register - * @hw: Hardware IRQ number (within external trigger block) - * - * Returns: Address of a HWSTATEXT register containing the status bit for - * the specified hardware IRQ number - */ -static void __iomem *meta_intc_stat_addr(irq_hw_number_t hw) -{ - return (void __iomem *)(HWSTATEXT + - HWSTAT_STRIDE * meta_intc_bank(hw)); -} - -/** - * meta_intc_level_addr() - Get the address of a HWLEVELEXT register - * @hw: Hardware IRQ number (within external trigger block) - * - * Returns: Address of a HWLEVELEXT register containing the sense bit for - * the specified hardware IRQ number - */ -static void __iomem *meta_intc_level_addr(irq_hw_number_t hw) -{ - return (void __iomem *)(HWLEVELEXT + - HWSTAT_STRIDE * meta_intc_bank(hw)); -} - -/** - * meta_intc_mask_addr() - Get the address of a HWMASKEXT register - * @hw: Hardware IRQ number (within external trigger block) - * - * Returns: Address of a HWMASKEXT register containing the mask bit for the - * specified hardware IRQ number - */ -static void __iomem *meta_intc_mask_addr(irq_hw_number_t hw) -{ - return (void __iomem *)(HWMASKEXT + - HWSTAT_STRIDE * meta_intc_bank(hw)); -} - -/** - * meta_intc_vec_addr() - Get the vector address of a hardware interrupt - * @hw: Hardware IRQ number (within external trigger block) - * - * Returns: Address of a HWVECEXT register controlling the core trigger to - * vector the IRQ onto - */ -static inline void __iomem *meta_intc_vec_addr(irq_hw_number_t hw) -{ - return (void __iomem *)(HWVEC0EXT + - HWVEC_BLK_STRIDE * meta_intc_bank(hw) + - HWVECnEXT_STRIDE * meta_intc_offset(hw)); -} - -/** - * meta_intc_startup_irq() - set up an external irq - * @data: data for the external irq to start up - * - * Multiplex interrupts for irq onto TR2. Clear any pending interrupts and - * unmask irq, both using the appropriate callbacks. - */ -static unsigned int meta_intc_startup_irq(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - void __iomem *vec_addr = meta_intc_vec_addr(hw); - int thread = hard_processor_id(); - - /* Perform any necessary acking. */ - if (data->chip->irq_ack) - data->chip->irq_ack(data); - - /* Wire up this interrupt to the core with HWVECxEXT. */ - metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr); - - /* Perform any necessary unmasking. */ - data->chip->irq_unmask(data); - - return 0; -} - -/** - * meta_intc_shutdown_irq() - turn off an external irq - * @data: data for the external irq to turn off - * - * Mask irq using the appropriate callback and stop muxing it onto TR2. - */ -static void meta_intc_shutdown_irq(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - void __iomem *vec_addr = meta_intc_vec_addr(hw); - - /* Mask the IRQ */ - data->chip->irq_mask(data); - - /* - * Disable the IRQ at the core by removing the interrupt from - * the HW vector mapping. - */ - metag_out32(0, vec_addr); -} - -/** - * meta_intc_ack_irq() - acknowledge an external irq - * @data: data for the external irq to ack - * - * Clear down an edge interrupt in the status register. - */ -static void meta_intc_ack_irq(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << meta_intc_offset(hw); - void __iomem *stat_addr = meta_intc_stat_addr(hw); - - /* Ack the int, if it is still 'on'. - * NOTE - this only works for edge triggered interrupts. - */ - if (metag_in32(stat_addr) & bit) - metag_out32(bit, stat_addr); -} - -/** - * record_irq_is_masked() - record the IRQ masked so it doesn't get handled - * @data: data for the external irq to record - * - * This should get called whenever an external IRQ is masked (by whichever - * callback is used). It records the IRQ masked so that it doesn't get handled - * if it still shows up in the status register. - */ -static void record_irq_is_masked(struct irq_data *data) -{ - struct meta_intc_priv *priv = &meta_intc_priv; - irq_hw_number_t hw = data->hwirq; - - clear_bit(meta_intc_offset(hw), &priv->unmasked[meta_intc_bank(hw)]); -} - -/** - * record_irq_is_unmasked() - record the IRQ unmasked so it can be handled - * @data: data for the external irq to record - * - * This should get called whenever an external IRQ is unmasked (by whichever - * callback is used). It records the IRQ unmasked so that it gets handled if it - * shows up in the status register. - */ -static void record_irq_is_unmasked(struct irq_data *data) -{ - struct meta_intc_priv *priv = &meta_intc_priv; - irq_hw_number_t hw = data->hwirq; - - set_bit(meta_intc_offset(hw), &priv->unmasked[meta_intc_bank(hw)]); -} - -/* - * For use by wrapper IRQ drivers - */ - -/** - * meta_intc_mask_irq_simple() - minimal mask used by wrapper IRQ drivers - * @data: data for the external irq being masked - * - * This should be called by any wrapper IRQ driver mask functions. it doesn't do - * any masking but records the IRQ as masked so that the core code knows the - * mask has taken place. It is the callers responsibility to ensure that the IRQ - * won't trigger an interrupt to the core. - */ -void meta_intc_mask_irq_simple(struct irq_data *data) -{ - record_irq_is_masked(data); -} - -/** - * meta_intc_unmask_irq_simple() - minimal unmask used by wrapper IRQ drivers - * @data: data for the external irq being unmasked - * - * This should be called by any wrapper IRQ driver unmask functions. it doesn't - * do any unmasking but records the IRQ as unmasked so that the core code knows - * the unmask has taken place. It is the callers responsibility to ensure that - * the IRQ can now trigger an interrupt to the core. - */ -void meta_intc_unmask_irq_simple(struct irq_data *data) -{ - record_irq_is_unmasked(data); -} - - -/** - * meta_intc_mask_irq() - mask an external irq using HWMASKEXT - * @data: data for the external irq to mask - * - * This is a default implementation of a mask function which makes use of the - * HWMASKEXT registers available in newer versions. - * - * Earlier versions without these registers should use SoC level IRQ masking - * which call the meta_intc_*_simple() functions above, or if that isn't - * available should use the fallback meta_intc_*_nomask() functions below. - */ -static void meta_intc_mask_irq(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << meta_intc_offset(hw); - void __iomem *mask_addr = meta_intc_mask_addr(hw); - unsigned long flags; - - record_irq_is_masked(data); - - /* update the interrupt mask */ - __global_lock2(flags); - metag_out32(metag_in32(mask_addr) & ~bit, mask_addr); - __global_unlock2(flags); -} - -/** - * meta_intc_unmask_irq() - unmask an external irq using HWMASKEXT - * @data: data for the external irq to unmask - * - * This is a default implementation of an unmask function which makes use of the - * HWMASKEXT registers available on new versions. It should be paired with - * meta_intc_mask_irq() above. - */ -static void meta_intc_unmask_irq(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << meta_intc_offset(hw); - void __iomem *mask_addr = meta_intc_mask_addr(hw); - unsigned long flags; - - record_irq_is_unmasked(data); - - /* update the interrupt mask */ - __global_lock2(flags); - metag_out32(metag_in32(mask_addr) | bit, mask_addr); - __global_unlock2(flags); -} - -/** - * meta_intc_mask_irq_nomask() - mask an external irq by unvectoring - * @data: data for the external irq to mask - * - * This is the version of the mask function for older versions which don't have - * HWMASKEXT registers, or a SoC level means of masking IRQs. Instead the IRQ is - * unvectored from the core and retriggered if necessary later. - */ -static void meta_intc_mask_irq_nomask(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - void __iomem *vec_addr = meta_intc_vec_addr(hw); - - record_irq_is_masked(data); - - /* there is no interrupt mask, so unvector the interrupt */ - metag_out32(0, vec_addr); -} - -/** - * meta_intc_unmask_edge_irq_nomask() - unmask an edge irq by revectoring - * @data: data for the external irq to unmask - * - * This is the version of the unmask function for older versions which don't - * have HWMASKEXT registers, or a SoC level means of masking IRQs. Instead the - * IRQ is revectored back to the core and retriggered if necessary. - * - * The retriggering done by this function is specific to edge interrupts. - */ -static void meta_intc_unmask_edge_irq_nomask(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << meta_intc_offset(hw); - void __iomem *stat_addr = meta_intc_stat_addr(hw); - void __iomem *vec_addr = meta_intc_vec_addr(hw); - unsigned int thread = hard_processor_id(); - - record_irq_is_unmasked(data); - - /* there is no interrupt mask, so revector the interrupt */ - metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr); - - /* - * Re-trigger interrupt - * - * Writing a 1 toggles, and a 0->1 transition triggers. We only - * retrigger if the status bit is already set, which means we - * need to clear it first. Retriggering is fundamentally racy - * because if the interrupt fires again after we clear it we - * could end up clearing it again and the interrupt handler - * thinking it hasn't fired. Therefore we need to keep trying to - * retrigger until the bit is set. - */ - if (metag_in32(stat_addr) & bit) { - metag_out32(bit, stat_addr); - while (!(metag_in32(stat_addr) & bit)) - metag_out32(bit, stat_addr); - } -} - -/** - * meta_intc_unmask_level_irq_nomask() - unmask a level irq by revectoring - * @data: data for the external irq to unmask - * - * This is the version of the unmask function for older versions which don't - * have HWMASKEXT registers, or a SoC level means of masking IRQs. Instead the - * IRQ is revectored back to the core and retriggered if necessary. - * - * The retriggering done by this function is specific to level interrupts. - */ -static void meta_intc_unmask_level_irq_nomask(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << meta_intc_offset(hw); - void __iomem *stat_addr = meta_intc_stat_addr(hw); - void __iomem *vec_addr = meta_intc_vec_addr(hw); - unsigned int thread = hard_processor_id(); - - record_irq_is_unmasked(data); - - /* there is no interrupt mask, so revector the interrupt */ - metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr); - - /* Re-trigger interrupt */ - /* Writing a 1 triggers interrupt */ - if (metag_in32(stat_addr) & bit) - metag_out32(bit, stat_addr); -} - -/** - * meta_intc_irq_set_type() - set the type of an external irq - * @data: data for the external irq to set the type of - * @flow_type: new irq flow type - * - * Set the flow type of an external interrupt. This updates the irq chip and irq - * handler depending on whether the irq is edge or level sensitive (the polarity - * is ignored), and also sets up the bit in HWLEVELEXT so the hardware knows - * when to trigger. - */ -static int meta_intc_irq_set_type(struct irq_data *data, unsigned int flow_type) -{ -#ifdef CONFIG_METAG_SUSPEND_MEM - struct meta_intc_priv *priv = &meta_intc_priv; -#endif - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << meta_intc_offset(hw); - void __iomem *level_addr = meta_intc_level_addr(hw); - unsigned long flags; - unsigned int level; - - /* update the chip/handler */ - if (flow_type & IRQ_TYPE_LEVEL_MASK) - irq_set_chip_handler_name_locked(data, &meta_intc_level_chip, - handle_level_irq, NULL); - else - irq_set_chip_handler_name_locked(data, &meta_intc_edge_chip, - handle_edge_irq, NULL); - - /* and clear/set the bit in HWLEVELEXT */ - __global_lock2(flags); - level = metag_in32(level_addr); - if (flow_type & IRQ_TYPE_LEVEL_MASK) - level |= bit; - else - level &= ~bit; - metag_out32(level, level_addr); -#ifdef CONFIG_METAG_SUSPEND_MEM - priv->levels_altered[meta_intc_bank(hw)] |= bit; -#endif - __global_unlock2(flags); - - return 0; -} - -/** - * meta_intc_irq_demux() - external irq de-multiplexer - * @desc: the interrupt description structure for this irq - * - * The cpu receives an interrupt on TR2 when a SoC interrupt has occurred. It is - * this function's job to demux this irq and figure out exactly which external - * irq needs servicing. - * - * Whilst using TR2 to detect external interrupts is a software convention it is - * (hopefully) unlikely to change. - */ -static void meta_intc_irq_demux(struct irq_desc *desc) -{ - struct meta_intc_priv *priv = &meta_intc_priv; - irq_hw_number_t hw; - unsigned int bank, irq_no, status; - void __iomem *stat_addr = meta_intc_stat_addr(0); - - /* - * Locate which interrupt has caused our handler to run. - */ - for (bank = 0; bank < priv->nr_banks; ++bank) { - /* Which interrupts are currently pending in this bank? */ -recalculate: - status = metag_in32(stat_addr) & priv->unmasked[bank]; - - for (hw = bank*32; status; status >>= 1, ++hw) { - if (status & 0x1) { - /* - * Map the hardware IRQ number to a virtual - * Linux IRQ number. - */ - irq_no = irq_linear_revmap(priv->domain, hw); - - /* - * Only fire off external interrupts that are - * registered to be handled by the kernel. - * Other external interrupts are probably being - * handled by other Meta hardware threads. - */ - generic_handle_irq(irq_no); - - /* - * The handler may have re-enabled interrupts - * which could have caused a nested invocation - * of this code and make the copy of the - * status register we are using invalid. - */ - goto recalculate; - } - } - stat_addr += HWSTAT_STRIDE; - } -} - -#ifdef CONFIG_SMP -/** - * meta_intc_set_affinity() - set the affinity for an interrupt - * @data: data for the external irq to set the affinity of - * @cpumask: cpu mask representing cpus which can handle the interrupt - * @force: whether to force (ignored) - * - * Revector the specified external irq onto a specific cpu's TR2 trigger, so - * that that cpu tends to be the one who handles it. - */ -static int meta_intc_set_affinity(struct irq_data *data, - const struct cpumask *cpumask, bool force) -{ - irq_hw_number_t hw = data->hwirq; - void __iomem *vec_addr = meta_intc_vec_addr(hw); - unsigned int cpu, thread; - - /* - * Wire up this interrupt from HWVECxEXT to the Meta core. - * - * Note that we can't wire up HWVECxEXT to interrupt more than - * one cpu (the interrupt code doesn't support it), so we just - * pick the first cpu we find in 'cpumask'. - */ - cpu = cpumask_any_and(cpumask, cpu_online_mask); - thread = cpu_2_hwthread_id[cpu]; - - metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR2(thread)), vec_addr); - - irq_data_update_effective_affinity(data, cpumask_of(cpu)); - - return 0; -} -#else -#define meta_intc_set_affinity NULL -#endif - -#ifdef CONFIG_PM_SLEEP -#define META_INTC_CHIP_FLAGS (IRQCHIP_MASK_ON_SUSPEND \ - | IRQCHIP_SKIP_SET_WAKE) -#else -#define META_INTC_CHIP_FLAGS 0 -#endif - -/* public edge/level irq chips which SoCs can override */ - -struct irq_chip meta_intc_edge_chip = { - .irq_startup = meta_intc_startup_irq, - .irq_shutdown = meta_intc_shutdown_irq, - .irq_ack = meta_intc_ack_irq, - .irq_mask = meta_intc_mask_irq, - .irq_unmask = meta_intc_unmask_irq, - .irq_set_type = meta_intc_irq_set_type, - .irq_set_affinity = meta_intc_set_affinity, - .flags = META_INTC_CHIP_FLAGS, -}; - -struct irq_chip meta_intc_level_chip = { - .irq_startup = meta_intc_startup_irq, - .irq_shutdown = meta_intc_shutdown_irq, - .irq_set_type = meta_intc_irq_set_type, - .irq_mask = meta_intc_mask_irq, - .irq_unmask = meta_intc_unmask_irq, - .irq_set_affinity = meta_intc_set_affinity, - .flags = META_INTC_CHIP_FLAGS, -}; - -/** - * meta_intc_map() - map an external irq - * @d: irq domain of external trigger block - * @irq: virtual irq number - * @hw: hardware irq number within external trigger block - * - * This sets up a virtual irq for a specified hardware interrupt. The irq chip - * and handler is configured, using the HWLEVELEXT registers to determine - * edge/level flow type. These registers will have been set when the irq type is - * set (or set to a default at init time). - */ -static int meta_intc_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - unsigned int bit = 1 << meta_intc_offset(hw); - void __iomem *level_addr = meta_intc_level_addr(hw); - - /* Go by the current sense in the HWLEVELEXT register */ - if (metag_in32(level_addr) & bit) - irq_set_chip_and_handler(irq, &meta_intc_level_chip, - handle_level_irq); - else - irq_set_chip_and_handler(irq, &meta_intc_edge_chip, - handle_edge_irq); - - irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(irq))); - return 0; -} - -static const struct irq_domain_ops meta_intc_domain_ops = { - .map = meta_intc_map, - .xlate = irq_domain_xlate_twocell, -}; - -#ifdef CONFIG_METAG_SUSPEND_MEM - -/** - * struct meta_intc_context - suspend context - * @levels: State of HWLEVELEXT registers - * @masks: State of HWMASKEXT registers - * @vectors: State of HWVECEXT registers - * @txvecint: State of TxVECINT registers - * - * This structure stores the IRQ state across suspend. - */ -struct meta_intc_context { - u32 levels[4]; - u32 masks[4]; - u8 vectors[4*32]; - - u8 txvecint[4][4]; -}; - -/* suspend context */ -static struct meta_intc_context *meta_intc_context; - -/** - * meta_intc_suspend() - store irq state - * - * To avoid interfering with other threads we only save the IRQ state of IRQs in - * use by Linux. - */ -static int meta_intc_suspend(void) -{ - struct meta_intc_priv *priv = &meta_intc_priv; - int i, j; - irq_hw_number_t hw; - unsigned int bank; - unsigned long flags; - struct meta_intc_context *context; - void __iomem *level_addr, *mask_addr, *vec_addr; - u32 mask, bit; - - context = kzalloc(sizeof(*context), GFP_ATOMIC); - if (!context) - return -ENOMEM; - - hw = 0; - level_addr = meta_intc_level_addr(0); - mask_addr = meta_intc_mask_addr(0); - for (bank = 0; bank < priv->nr_banks; ++bank) { - vec_addr = meta_intc_vec_addr(hw); - - /* create mask of interrupts in use */ - mask = 0; - for (bit = 1; bit; bit <<= 1) { - i = irq_linear_revmap(priv->domain, hw); - /* save mapped irqs which are enabled or have actions */ - if (i && (!irqd_irq_disabled(irq_get_irq_data(i)) || - irq_has_action(i))) { - mask |= bit; - - /* save trigger vector */ - context->vectors[hw] = metag_in32(vec_addr); - } - - ++hw; - vec_addr += HWVECnEXT_STRIDE; - } - - /* save level state if any IRQ levels altered */ - if (priv->levels_altered[bank]) - context->levels[bank] = metag_in32(level_addr); - /* save mask state if any IRQs in use */ - if (mask) - context->masks[bank] = metag_in32(mask_addr); - - level_addr += HWSTAT_STRIDE; - mask_addr += HWSTAT_STRIDE; - } - - /* save trigger matrixing */ - __global_lock2(flags); - for (i = 0; i < 4; ++i) - for (j = 0; j < 4; ++j) - context->txvecint[i][j] = metag_in32(T0VECINT_BHALT + - TnVECINT_STRIDE*i + - 8*j); - __global_unlock2(flags); - - meta_intc_context = context; - return 0; -} - -/** - * meta_intc_resume() - restore saved irq state - * - * Restore the saved IRQ state and drop it. - */ -static void meta_intc_resume(void) -{ - struct meta_intc_priv *priv = &meta_intc_priv; - int i, j; - irq_hw_number_t hw; - unsigned int bank; - unsigned long flags; - struct meta_intc_context *context = meta_intc_context; - void __iomem *level_addr, *mask_addr, *vec_addr; - u32 mask, bit, tmp; - - meta_intc_context = NULL; - - hw = 0; - level_addr = meta_intc_level_addr(0); - mask_addr = meta_intc_mask_addr(0); - for (bank = 0; bank < priv->nr_banks; ++bank) { - vec_addr = meta_intc_vec_addr(hw); - - /* create mask of interrupts in use */ - mask = 0; - for (bit = 1; bit; bit <<= 1) { - i = irq_linear_revmap(priv->domain, hw); - /* restore mapped irqs, enabled or with actions */ - if (i && (!irqd_irq_disabled(irq_get_irq_data(i)) || - irq_has_action(i))) { - mask |= bit; - - /* restore trigger vector */ - metag_out32(context->vectors[hw], vec_addr); - } - - ++hw; - vec_addr += HWVECnEXT_STRIDE; - } - - if (mask) { - /* restore mask state */ - __global_lock2(flags); - tmp = metag_in32(mask_addr); - tmp = (tmp & ~mask) | (context->masks[bank] & mask); - metag_out32(tmp, mask_addr); - __global_unlock2(flags); - } - - mask = priv->levels_altered[bank]; - if (mask) { - /* restore level state */ - __global_lock2(flags); - tmp = metag_in32(level_addr); - tmp = (tmp & ~mask) | (context->levels[bank] & mask); - metag_out32(tmp, level_addr); - __global_unlock2(flags); - } - - level_addr += HWSTAT_STRIDE; - mask_addr += HWSTAT_STRIDE; - } - - /* restore trigger matrixing */ - __global_lock2(flags); - for (i = 0; i < 4; ++i) { - for (j = 0; j < 4; ++j) { - metag_out32(context->txvecint[i][j], - T0VECINT_BHALT + - TnVECINT_STRIDE*i + - 8*j); - } - } - __global_unlock2(flags); - - kfree(context); -} - -static struct syscore_ops meta_intc_syscore_ops = { - .suspend = meta_intc_suspend, - .resume = meta_intc_resume, -}; - -static void __init meta_intc_init_syscore_ops(struct meta_intc_priv *priv) -{ - register_syscore_ops(&meta_intc_syscore_ops); -} -#else -#define meta_intc_init_syscore_ops(priv) do {} while (0) -#endif - -/** - * meta_intc_init_cpu() - register with a Meta cpu - * @priv: private interrupt controller data - * @cpu: the CPU to register on - * - * Configure @cpu's TR2 irq so that we can demux external irqs. - */ -static void __init meta_intc_init_cpu(struct meta_intc_priv *priv, int cpu) -{ - unsigned int thread = cpu_2_hwthread_id[cpu]; - unsigned int signum = TBID_SIGNUM_TR2(thread); - int irq = tbisig_map(signum); - - /* Register the multiplexed IRQ handler */ - irq_set_chained_handler(irq, meta_intc_irq_demux); - irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); -} - -/** - * meta_intc_no_mask() - indicate lack of HWMASKEXT registers - * - * Called from SoC code (or init code below) to dynamically indicate the lack of - * HWMASKEXT registers (for example depending on some SoC revision register). - * This alters the irq mask and unmask callbacks to use the fallback - * unvectoring/retriggering technique instead of using HWMASKEXT registers. - */ -void __init meta_intc_no_mask(void) -{ - meta_intc_edge_chip.irq_mask = meta_intc_mask_irq_nomask; - meta_intc_edge_chip.irq_unmask = meta_intc_unmask_edge_irq_nomask; - meta_intc_level_chip.irq_mask = meta_intc_mask_irq_nomask; - meta_intc_level_chip.irq_unmask = meta_intc_unmask_level_irq_nomask; -} - -/** - * init_external_IRQ() - initialise the external irq controller - * - * Set up the external irq controller using device tree properties. This is - * called from init_IRQ(). - */ -int __init init_external_IRQ(void) -{ - struct meta_intc_priv *priv = &meta_intc_priv; - struct device_node *node; - int ret, cpu; - u32 val; - bool no_masks = false; - - node = of_find_compatible_node(NULL, NULL, "img,meta-intc"); - if (!node) - return -ENOENT; - - /* Get number of banks */ - ret = of_property_read_u32(node, "num-banks", &val); - if (ret) { - pr_err("meta-intc: No num-banks property found\n"); - return ret; - } - if (val < 1 || val > 4) { - pr_err("meta-intc: num-banks (%u) out of range\n", val); - return -EINVAL; - } - priv->nr_banks = val; - - /* Are any mask registers present? */ - if (of_get_property(node, "no-mask", NULL)) - no_masks = true; - - /* No HWMASKEXT registers present? */ - if (no_masks) - meta_intc_no_mask(); - - /* Set up an IRQ domain */ - /* - * This is a legacy IRQ domain for now until all the platform setup code - * has been converted to devicetree. - */ - priv->domain = irq_domain_add_linear(node, priv->nr_banks*32, - &meta_intc_domain_ops, priv); - if (unlikely(!priv->domain)) { - pr_err("meta-intc: cannot add IRQ domain\n"); - return -ENOMEM; - } - - /* Setup TR2 for all cpus. */ - for_each_possible_cpu(cpu) - meta_intc_init_cpu(priv, cpu); - - /* Set up system suspend/resume callbacks */ - meta_intc_init_syscore_ops(priv); - - pr_info("meta-intc: External IRQ controller initialised (%u IRQs)\n", - priv->nr_banks*32); - - return 0; -} diff --git a/drivers/irqchip/irq-metag.c b/drivers/irqchip/irq-metag.c deleted file mode 100644 index 857b946747eb..000000000000 --- a/drivers/irqchip/irq-metag.c +++ /dev/null @@ -1,343 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Meta internal (HWSTATMETA) interrupt code. - * - * Copyright (C) 2011-2012 Imagination Technologies Ltd. - * - * This code is based on the code in SoC/common/irq.c and SoC/comet/irq.c - * The code base could be generalised/merged as a lot of the functionality is - * similar. Until this is done, we try to keep the code simple here. - */ - -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irqdomain.h> - -#include <asm/irq.h> -#include <asm/hwthread.h> - -#define PERF0VECINT 0x04820580 -#define PERF1VECINT 0x04820588 -#define PERF0TRIG_OFFSET 16 -#define PERF1TRIG_OFFSET 17 - -/** - * struct metag_internal_irq_priv - private meta internal interrupt data - * @domain: IRQ domain for all internal Meta IRQs (HWSTATMETA) - * @unmasked: Record of unmasked IRQs - */ -struct metag_internal_irq_priv { - struct irq_domain *domain; - - unsigned long unmasked; -}; - -/* Private data for the one and only internal interrupt controller */ -static struct metag_internal_irq_priv metag_internal_irq_priv; - -static unsigned int metag_internal_irq_startup(struct irq_data *data); -static void metag_internal_irq_shutdown(struct irq_data *data); -static void metag_internal_irq_ack(struct irq_data *data); -static void metag_internal_irq_mask(struct irq_data *data); -static void metag_internal_irq_unmask(struct irq_data *data); -#ifdef CONFIG_SMP -static int metag_internal_irq_set_affinity(struct irq_data *data, - const struct cpumask *cpumask, bool force); -#endif - -static struct irq_chip internal_irq_edge_chip = { - .name = "HWSTATMETA-IRQ", - .irq_startup = metag_internal_irq_startup, - .irq_shutdown = metag_internal_irq_shutdown, - .irq_ack = metag_internal_irq_ack, - .irq_mask = metag_internal_irq_mask, - .irq_unmask = metag_internal_irq_unmask, -#ifdef CONFIG_SMP - .irq_set_affinity = metag_internal_irq_set_affinity, -#endif -}; - -/* - * metag_hwvec_addr - get the address of *VECINT regs of irq - * - * This function is a table of supported triggers on HWSTATMETA - * Could do with a structure, but better keep it simple. Changes - * in this code should be rare. - */ -static inline void __iomem *metag_hwvec_addr(irq_hw_number_t hw) -{ - void __iomem *addr; - - switch (hw) { - case PERF0TRIG_OFFSET: - addr = (void __iomem *)PERF0VECINT; - break; - case PERF1TRIG_OFFSET: - addr = (void __iomem *)PERF1VECINT; - break; - default: - addr = NULL; - break; - } - return addr; -} - -/* - * metag_internal_startup - setup an internal irq - * @irq: the irq to startup - * - * Multiplex interrupts for @irq onto TR1. Clear any pending - * interrupts. - */ -static unsigned int metag_internal_irq_startup(struct irq_data *data) -{ - /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */ - metag_internal_irq_ack(data); - - /* Enable the interrupt by unmasking it */ - metag_internal_irq_unmask(data); - - return 0; -} - -/* - * metag_internal_irq_shutdown - turn off the irq - * @irq: the irq number to turn off - * - * Mask @irq and clear any pending interrupts. - * Stop muxing @irq onto TR1. - */ -static void metag_internal_irq_shutdown(struct irq_data *data) -{ - /* Disable the IRQ at the core by masking it. */ - metag_internal_irq_mask(data); - - /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */ - metag_internal_irq_ack(data); -} - -/* - * metag_internal_irq_ack - acknowledge irq - * @irq: the irq to ack - */ -static void metag_internal_irq_ack(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << hw; - - if (metag_in32(HWSTATMETA) & bit) - metag_out32(bit, HWSTATMETA); -} - -/** - * metag_internal_irq_mask() - mask an internal irq by unvectoring - * @data: data for the internal irq to mask - * - * HWSTATMETA has no mask register. Instead the IRQ is unvectored from the core - * and retriggered if necessary later. - */ -static void metag_internal_irq_mask(struct irq_data *data) -{ - struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; - irq_hw_number_t hw = data->hwirq; - void __iomem *vec_addr = metag_hwvec_addr(hw); - - clear_bit(hw, &priv->unmasked); - - /* there is no interrupt mask, so unvector the interrupt */ - metag_out32(0, vec_addr); -} - -/** - * meta_intc_unmask_edge_irq_nomask() - unmask an edge irq by revectoring - * @data: data for the internal irq to unmask - * - * HWSTATMETA has no mask register. Instead the IRQ is revectored back to the - * core and retriggered if necessary. - */ -static void metag_internal_irq_unmask(struct irq_data *data) -{ - struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << hw; - void __iomem *vec_addr = metag_hwvec_addr(hw); - unsigned int thread = hard_processor_id(); - - set_bit(hw, &priv->unmasked); - - /* there is no interrupt mask, so revector the interrupt */ - metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), vec_addr); - - /* - * Re-trigger interrupt - * - * Writing a 1 toggles, and a 0->1 transition triggers. We only - * retrigger if the status bit is already set, which means we - * need to clear it first. Retriggering is fundamentally racy - * because if the interrupt fires again after we clear it we - * could end up clearing it again and the interrupt handler - * thinking it hasn't fired. Therefore we need to keep trying to - * retrigger until the bit is set. - */ - if (metag_in32(HWSTATMETA) & bit) { - metag_out32(bit, HWSTATMETA); - while (!(metag_in32(HWSTATMETA) & bit)) - metag_out32(bit, HWSTATMETA); - } -} - -#ifdef CONFIG_SMP -/* - * metag_internal_irq_set_affinity - set the affinity for an interrupt - */ -static int metag_internal_irq_set_affinity(struct irq_data *data, - const struct cpumask *cpumask, bool force) -{ - unsigned int cpu, thread; - irq_hw_number_t hw = data->hwirq; - /* - * Wire up this interrupt from *VECINT to the Meta core. - * - * Note that we can't wire up *VECINT to interrupt more than - * one cpu (the interrupt code doesn't support it), so we just - * pick the first cpu we find in 'cpumask'. - */ - cpu = cpumask_any_and(cpumask, cpu_online_mask); - thread = cpu_2_hwthread_id[cpu]; - - metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), - metag_hwvec_addr(hw)); - - return 0; -} -#endif - -/* - * metag_internal_irq_demux - irq de-multiplexer - * @irq: the interrupt number - * @desc: the interrupt description structure for this irq - * - * The cpu receives an interrupt on TR1 when an interrupt has - * occurred. It is this function's job to demux this irq and - * figure out exactly which trigger needs servicing. - */ -static void metag_internal_irq_demux(struct irq_desc *desc) -{ - struct metag_internal_irq_priv *priv = irq_desc_get_handler_data(desc); - irq_hw_number_t hw; - unsigned int irq_no; - u32 status; - -recalculate: - status = metag_in32(HWSTATMETA) & priv->unmasked; - - for (hw = 0; status != 0; status >>= 1, ++hw) { - if (status & 0x1) { - /* - * Map the hardware IRQ number to a virtual Linux IRQ - * number. - */ - irq_no = irq_linear_revmap(priv->domain, hw); - - /* - * Only fire off interrupts that are - * registered to be handled by the kernel. - * Other interrupts are probably being - * handled by other Meta hardware threads. - */ - generic_handle_irq(irq_no); - - /* - * The handler may have re-enabled interrupts - * which could have caused a nested invocation - * of this code and make the copy of the - * status register we are using invalid. - */ - goto recalculate; - } - } -} - -/** - * internal_irq_map() - Map an internal meta IRQ to a virtual IRQ number. - * @hw: Number of the internal IRQ. Must be in range. - * - * Returns: The virtual IRQ number of the Meta internal IRQ specified by - * @hw. - */ -int internal_irq_map(unsigned int hw) -{ - struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; - if (!priv->domain) - return -ENODEV; - return irq_create_mapping(priv->domain, hw); -} - -/** - * metag_internal_irq_init_cpu - regsister with the Meta cpu - * @cpu: the CPU to register on - * - * Configure @cpu's TR1 irq so that we can demux irqs. - */ -static void metag_internal_irq_init_cpu(struct metag_internal_irq_priv *priv, - int cpu) -{ - unsigned int thread = cpu_2_hwthread_id[cpu]; - unsigned int signum = TBID_SIGNUM_TR1(thread); - int irq = tbisig_map(signum); - - /* Register the multiplexed IRQ handler */ - irq_set_chained_handler_and_data(irq, metag_internal_irq_demux, priv); - irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); -} - -/** - * metag_internal_intc_map() - map an internal irq - * @d: irq domain of internal trigger block - * @irq: virtual irq number - * @hw: hardware irq number within internal trigger block - * - * This sets up a virtual irq for a specified hardware interrupt. The irq chip - * and handler is configured. - */ -static int metag_internal_intc_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - /* only register interrupt if it is mapped */ - if (!metag_hwvec_addr(hw)) - return -EINVAL; - - irq_set_chip_and_handler(irq, &internal_irq_edge_chip, - handle_edge_irq); - return 0; -} - -static const struct irq_domain_ops metag_internal_intc_domain_ops = { - .map = metag_internal_intc_map, -}; - -/** - * metag_internal_irq_register - register internal IRQs - * - * Register the irq chip and handler function for all internal IRQs - */ -int __init init_internal_IRQ(void) -{ - struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; - unsigned int cpu; - - /* Set up an IRQ domain */ - priv->domain = irq_domain_add_linear(NULL, 32, - &metag_internal_intc_domain_ops, - priv); - if (unlikely(!priv->domain)) { - pr_err("meta-internal-intc: cannot add IRQ domain\n"); - return -ENOMEM; - } - - /* Setup TR1 for all cpus. */ - for_each_possible_cpu(cpu) - metag_internal_irq_init_cpu(priv, cpu); - - return 0; -}; |