summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-11-28 15:55:14 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-11-28 15:55:14 -0800
commit4742eb3dadbb6970a8f267e4605192d1e8199425 (patch)
treebe49020fbd6502cde4c10da24d3800947afc6317 /drivers
parentcba3b00deab5a8564d61ec18e61ba6ba82203299 (diff)
parent263e80b43559a6103e178a9176938ce171b23872 (diff)
downloadlinux-4742eb3dadbb6970a8f267e4605192d1e8199425.tar.bz2
Merge tag 'usb-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH: "Here are some USB driver fixes and new device ids for 3.18-rc7. Full details are in the shortlog, and all of these have been in the linux-next tree for a while" * tag 'usb-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000 usb: xhci: rework root port wake bits if controller isn't allowed to wakeup USB: xhci: Reset a halted endpoint immediately when we encounter a stall. Revert "xhci: clear root port wake on bits if controller isn't wake-up capable" USB: xhci: don't start a halted endpoint before its new dequeue is set USB: uas: Add no-uas quirk for Hitachi usb-3 enclosures 4971:1012 USB: ssu100: fix overrun-error reporting USB: keyspan: fix overrun-error reporting USB: keyspan: fix tty line-status reporting usb: serial: ftdi_sio: add PIDs for Matrix Orbital products usb: dwc3: ep0: fix for dead code USB: serial: cp210x: add IDs for CEL MeshConnect USB Stick
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/core/quirks.c3
-rw-r--r--drivers/usb/dwc3/ep0.c8
-rw-r--r--drivers/usb/host/xhci-hub.c5
-rw-r--r--drivers/usb/host/xhci-pci.c2
-rw-r--r--drivers/usb/host/xhci-plat.c10
-rw-r--r--drivers/usb/host/xhci-ring.c43
-rw-r--r--drivers/usb/host/xhci.c107
-rw-r--r--drivers/usb/host/xhci.h2
-rw-r--r--drivers/usb/serial/cp210x.c1
-rw-r--r--drivers/usb/serial/ftdi_sio.c33
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h39
-rw-r--r--drivers/usb/serial/keyspan.c97
-rw-r--r--drivers/usb/serial/ssu100.c11
-rw-r--r--drivers/usb/storage/unusual_uas.h7
14 files changed, 224 insertions, 144 deletions
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 39b4081b632d..96fafed92b76 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -44,6 +44,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Microsoft Wireless Laser Mouse 6000 Receiver */
+ { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 711b23019d54..df38e7ef4976 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -791,6 +791,10 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
trb = dwc->ep0_trb;
+ r = next_request(&ep0->request_list);
+ if (!r)
+ return;
+
status = DWC3_TRB_SIZE_TRBSTS(trb->size);
if (status == DWC3_TRBSTS_SETUP_PENDING) {
dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
@@ -801,10 +805,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
return;
}
- r = next_request(&ep0->request_list);
- if (!r)
- return;
-
ur = &r->request;
length = trb->size & DWC3_TRB_SIZE_MASK;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 696160d48ae8..388cfd83b6b6 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -22,7 +22,6 @@
#include <linux/slab.h>
-#include <linux/device.h>
#include <asm/unaligned.h>
#include "xhci.h"
@@ -1149,9 +1148,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
* including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME
* is enabled, so also enable remote wake here.
*/
- if (hcd->self.root_hub->do_remote_wakeup
- && device_may_wakeup(hcd->self.controller)) {
-
+ if (hcd->self.root_hub->do_remote_wakeup) {
if (t1 & PORT_CONNECT) {
t2 |= PORT_WKOC_E | PORT_WKDISC_E;
t2 &= ~PORT_WKCONN_E;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 9a69b1f1b300..142b601f9563 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -281,7 +281,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
pdev->no_d3cold = true;
- return xhci_suspend(xhci);
+ return xhci_suspend(xhci, do_wakeup);
}
static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 3d78b0cd674b..646300cbe5f7 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -204,7 +204,15 @@ static int xhci_plat_suspend(struct device *dev)
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- return xhci_suspend(xhci);
+ /*
+ * xhci_suspend() needs `do_wakeup` to know whether host is allowed
+ * to do wakeup during suspend. Since xhci_plat_suspend is currently
+ * only designed for system suspend, device_may_wakeup() is enough
+ * to dertermine whether host is allowed to do wakeup. Need to
+ * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
+ * also applies to runtime suspend.
+ */
+ return xhci_suspend(xhci, device_may_wakeup(dev));
}
static int xhci_plat_resume(struct device *dev)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bc6fcbc16f61..06433aec81d7 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1067,9 +1067,8 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
false);
xhci_ring_cmd_db(xhci);
} else {
- /* Clear our internal halted state and restart the ring(s) */
+ /* Clear our internal halted state */
xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
- ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
}
@@ -1823,22 +1822,13 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
ep->stopped_td = td;
return 0;
} else {
- if (trb_comp_code == COMP_STALL) {
- /* The transfer is completed from the driver's
- * perspective, but we need to issue a set dequeue
- * command for this stalled endpoint to move the dequeue
- * pointer past the TD. We can't do that here because
- * the halt condition must be cleared first. Let the
- * USB class driver clear the stall later.
- */
- ep->stopped_td = td;
- ep->stopped_stream = ep_ring->stream_id;
- } else if (xhci_requires_manual_halt_cleanup(xhci,
- ep_ctx, trb_comp_code)) {
- /* Other types of errors halt the endpoint, but the
- * class driver doesn't call usb_reset_endpoint() unless
- * the error is -EPIPE. Clear the halted status in the
- * xHCI hardware manually.
+ if (trb_comp_code == COMP_STALL ||
+ xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code)) {
+ /* Issue a reset endpoint command to clear the host side
+ * halt, followed by a set dequeue command to move the
+ * dequeue pointer past the TD.
+ * The class driver clears the device side halt later.
*/
xhci_cleanup_halted_endpoint(xhci,
slot_id, ep_index, ep_ring->stream_id,
@@ -1958,9 +1948,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
else
td->urb->actual_length = 0;
- xhci_cleanup_halted_endpoint(xhci,
- slot_id, ep_index, 0, td, event_trb);
- return finish_td(xhci, td, event_trb, event, ep, status, true);
+ return finish_td(xhci, td, event_trb, event, ep, status, false);
}
/*
* Did we transfer any data, despite the errors that might have
@@ -2519,17 +2507,8 @@ cleanup:
if (ret) {
urb = td->urb;
urb_priv = urb->hcpriv;
- /* Leave the TD around for the reset endpoint function
- * to use(but only if it's not a control endpoint,
- * since we already queued the Set TR dequeue pointer
- * command for stalled control endpoints).
- */
- if (usb_endpoint_xfer_control(&urb->ep->desc) ||
- (trb_comp_code != COMP_STALL &&
- trb_comp_code != COMP_BABBLE))
- xhci_urb_free_priv(xhci, urb_priv);
- else
- kfree(urb_priv);
+
+ xhci_urb_free_priv(xhci, urb_priv);
usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
if ((urb->actual_length != urb->transfer_buffer_length &&
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 2a5d45b4cb15..033b46c470bd 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -35,6 +35,8 @@
#define DRIVER_AUTHOR "Sarah Sharp"
#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+
/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
static int link_quirk;
module_param(link_quirk, int, S_IRUGO | S_IWUSR);
@@ -851,13 +853,47 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
xhci_set_cmd_ring_deq(xhci);
}
+static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
+{
+ int port_index;
+ __le32 __iomem **port_array;
+ unsigned long flags;
+ u32 t1, t2;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ /* disble usb3 ports Wake bits*/
+ port_index = xhci->num_usb3_ports;
+ port_array = xhci->usb3_ports;
+ while (port_index--) {
+ t1 = readl(port_array[port_index]);
+ t1 = xhci_port_state_to_neutral(t1);
+ t2 = t1 & ~PORT_WAKE_BITS;
+ if (t1 != t2)
+ writel(t2, port_array[port_index]);
+ }
+
+ /* disble usb2 ports Wake bits*/
+ port_index = xhci->num_usb2_ports;
+ port_array = xhci->usb2_ports;
+ while (port_index--) {
+ t1 = readl(port_array[port_index]);
+ t1 = xhci_port_state_to_neutral(t1);
+ t2 = t1 & ~PORT_WAKE_BITS;
+ if (t1 != t2)
+ writel(t2, port_array[port_index]);
+ }
+
+ spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
/*
* Stop HC (not bus-specific)
*
* This is called when the machine transition into S3/S4 mode.
*
*/
-int xhci_suspend(struct xhci_hcd *xhci)
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
{
int rc = 0;
unsigned int delay = XHCI_MAX_HALT_USEC;
@@ -868,6 +904,10 @@ int xhci_suspend(struct xhci_hcd *xhci)
xhci->shared_hcd->state != HC_STATE_SUSPENDED)
return -EINVAL;
+ /* Clear root port wake on bits if wakeup not allowed. */
+ if (!do_wakeup)
+ xhci_disable_port_wake_on_bits(xhci);
+
/* Don't poll the roothubs on bus suspend. */
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
@@ -2912,68 +2952,33 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
}
}
-/* Deal with stalled endpoints. The core should have sent the control message
- * to clear the halt condition. However, we need to make the xHCI hardware
- * reset its sequence number, since a device will expect a sequence number of
- * zero after the halt condition is cleared.
+/* Called when clearing halted device. The core should have sent the control
+ * message to clear the device halt condition. The host side of the halt should
+ * already be cleared with a reset endpoint command issued when the STALL tx
+ * event was received.
+ *
* Context: in_interrupt
*/
+
void xhci_endpoint_reset(struct usb_hcd *hcd,
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct usb_device *udev;
- unsigned int ep_index;
- unsigned long flags;
- int ret;
- struct xhci_virt_ep *virt_ep;
- struct xhci_command *command;
xhci = hcd_to_xhci(hcd);
- udev = (struct usb_device *) ep->hcpriv;
- /* Called with a root hub endpoint (or an endpoint that wasn't added
- * with xhci_add_endpoint()
- */
- if (!ep->hcpriv)
- return;
- ep_index = xhci_get_endpoint_index(&ep->desc);
- virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index];
- if (!virt_ep->stopped_td) {
- xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
- "Endpoint 0x%x not halted, refusing to reset.",
- ep->desc.bEndpointAddress);
- return;
- }
- if (usb_endpoint_xfer_control(&ep->desc)) {
- xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
- "Control endpoint stall already handled.");
- return;
- }
- command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
- if (!command)
- return;
-
- xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
- "Queueing reset endpoint command");
- spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index);
/*
- * Can't change the ring dequeue pointer until it's transitioned to the
- * stopped state, which is only upon a successful reset endpoint
- * command. Better hope that last command worked!
+ * We might need to implement the config ep cmd in xhci 4.8.1 note:
+ * The Reset Endpoint Command may only be issued to endpoints in the
+ * Halted state. If software wishes reset the Data Toggle or Sequence
+ * Number of an endpoint that isn't in the Halted state, then software
+ * may issue a Configure Endpoint Command with the Drop and Add bits set
+ * for the target endpoint. that is in the Stopped state.
*/
- if (!ret) {
- xhci_cleanup_stalled_ring(xhci, udev, ep_index);
- kfree(virt_ep->stopped_td);
- xhci_ring_cmd_db(xhci);
- }
- virt_ep->stopped_td = NULL;
- virt_ep->stopped_stream = 0;
- spin_unlock_irqrestore(&xhci->lock, flags);
- if (ret)
- xhci_warn(xhci, "FIXME allocate a new ring segment\n");
+ /* For now just print debug to follow the situation */
+ xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n",
+ ep->desc.bEndpointAddress);
}
static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index df76d642e719..d745715a1e2f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1746,7 +1746,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *));
#ifdef CONFIG_PM
-int xhci_suspend(struct xhci_hcd *xhci);
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
#else
#define xhci_suspend NULL
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index cfd009dc4018..6c4eb3cf5efd 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -120,6 +120,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+ { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */
{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0dad8ce5a609..1ebb351b9e9a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -470,6 +470,39 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 6786b705ccf6..e52409c9be99 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -926,8 +926,8 @@
#define BAYER_CONTOUR_CABLE_PID 0x6001
/*
- * The following are the values for the Matrix Orbital FTDI Range
- * Anything in this range will use an FT232RL.
+ * Matrix Orbital Intelligent USB displays.
+ * http://www.matrixorbital.com
*/
#define MTXORB_VID 0x1B3D
#define MTXORB_FTDI_RANGE_0100_PID 0x0100
@@ -1186,8 +1186,39 @@
#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
-
-
+#define MTXORB_FTDI_RANGE_4701_PID 0x4701
+#define MTXORB_FTDI_RANGE_9300_PID 0x9300
+#define MTXORB_FTDI_RANGE_9301_PID 0x9301
+#define MTXORB_FTDI_RANGE_9302_PID 0x9302
+#define MTXORB_FTDI_RANGE_9303_PID 0x9303
+#define MTXORB_FTDI_RANGE_9304_PID 0x9304
+#define MTXORB_FTDI_RANGE_9305_PID 0x9305
+#define MTXORB_FTDI_RANGE_9306_PID 0x9306
+#define MTXORB_FTDI_RANGE_9307_PID 0x9307
+#define MTXORB_FTDI_RANGE_9308_PID 0x9308
+#define MTXORB_FTDI_RANGE_9309_PID 0x9309
+#define MTXORB_FTDI_RANGE_930A_PID 0x930A
+#define MTXORB_FTDI_RANGE_930B_PID 0x930B
+#define MTXORB_FTDI_RANGE_930C_PID 0x930C
+#define MTXORB_FTDI_RANGE_930D_PID 0x930D
+#define MTXORB_FTDI_RANGE_930E_PID 0x930E
+#define MTXORB_FTDI_RANGE_930F_PID 0x930F
+#define MTXORB_FTDI_RANGE_9310_PID 0x9310
+#define MTXORB_FTDI_RANGE_9311_PID 0x9311
+#define MTXORB_FTDI_RANGE_9312_PID 0x9312
+#define MTXORB_FTDI_RANGE_9313_PID 0x9313
+#define MTXORB_FTDI_RANGE_9314_PID 0x9314
+#define MTXORB_FTDI_RANGE_9315_PID 0x9315
+#define MTXORB_FTDI_RANGE_9316_PID 0x9316
+#define MTXORB_FTDI_RANGE_9317_PID 0x9317
+#define MTXORB_FTDI_RANGE_9318_PID 0x9318
+#define MTXORB_FTDI_RANGE_9319_PID 0x9319
+#define MTXORB_FTDI_RANGE_931A_PID 0x931A
+#define MTXORB_FTDI_RANGE_931B_PID 0x931B
+#define MTXORB_FTDI_RANGE_931C_PID 0x931C
+#define MTXORB_FTDI_RANGE_931D_PID 0x931D
+#define MTXORB_FTDI_RANGE_931E_PID 0x931E
+#define MTXORB_FTDI_RANGE_931F_PID 0x931F
/*
* The Mobility Lab (TML)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 93cb7cebda62..077c714f1285 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -311,24 +311,30 @@ static void usa26_indat_callback(struct urb *urb)
if ((data[0] & 0x80) == 0) {
/* no errors on individual bytes, only
possible overrun err */
- if (data[0] & RXERROR_OVERRUN)
- err = TTY_OVERRUN;
- else
- err = 0;
+ if (data[0] & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
for (i = 1; i < urb->actual_length ; ++i)
- tty_insert_flip_char(&port->port, data[i], err);
+ tty_insert_flip_char(&port->port, data[i],
+ TTY_NORMAL);
} else {
/* some bytes had errors, every byte has status */
dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
for (i = 0; i + 1 < urb->actual_length; i += 2) {
- int stat = data[i], flag = 0;
- if (stat & RXERROR_OVERRUN)
- flag |= TTY_OVERRUN;
- if (stat & RXERROR_FRAMING)
- flag |= TTY_FRAME;
- if (stat & RXERROR_PARITY)
- flag |= TTY_PARITY;
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
/* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
tty_insert_flip_char(&port->port, data[i+1],
flag);
}
@@ -649,14 +655,19 @@ static void usa49_indat_callback(struct urb *urb)
} else {
/* some bytes had errors, every byte has status */
for (i = 0; i + 1 < urb->actual_length; i += 2) {
- int stat = data[i], flag = 0;
- if (stat & RXERROR_OVERRUN)
- flag |= TTY_OVERRUN;
- if (stat & RXERROR_FRAMING)
- flag |= TTY_FRAME;
- if (stat & RXERROR_PARITY)
- flag |= TTY_PARITY;
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
/* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
tty_insert_flip_char(&port->port, data[i+1],
flag);
}
@@ -713,15 +724,19 @@ static void usa49wg_indat_callback(struct urb *urb)
*/
for (x = 0; x + 1 < len &&
i + 1 < urb->actual_length; x += 2) {
- int stat = data[i], flag = 0;
+ int stat = data[i];
+ int flag = TTY_NORMAL;
- if (stat & RXERROR_OVERRUN)
- flag |= TTY_OVERRUN;
- if (stat & RXERROR_FRAMING)
- flag |= TTY_FRAME;
- if (stat & RXERROR_PARITY)
- flag |= TTY_PARITY;
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
/* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
tty_insert_flip_char(&port->port, data[i+1],
flag);
i += 2;
@@ -773,25 +788,31 @@ static void usa90_indat_callback(struct urb *urb)
if ((data[0] & 0x80) == 0) {
/* no errors on individual bytes, only
possible overrun err*/
- if (data[0] & RXERROR_OVERRUN)
- err = TTY_OVERRUN;
- else
- err = 0;
+ if (data[0] & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
for (i = 1; i < urb->actual_length ; ++i)
tty_insert_flip_char(&port->port,
- data[i], err);
+ data[i], TTY_NORMAL);
} else {
/* some bytes had errors, every byte has status */
dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
for (i = 0; i + 1 < urb->actual_length; i += 2) {
- int stat = data[i], flag = 0;
- if (stat & RXERROR_OVERRUN)
- flag |= TTY_OVERRUN;
- if (stat & RXERROR_FRAMING)
- flag |= TTY_FRAME;
- if (stat & RXERROR_PARITY)
- flag |= TTY_PARITY;
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(
+ &port->port, 0,
+ TTY_OVERRUN);
+ }
/* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
tty_insert_flip_char(&port->port,
data[i+1], flag);
}
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index a7fe664b6b7d..70a098de429f 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -490,10 +490,9 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
if (*tty_flag == TTY_NORMAL)
*tty_flag = TTY_FRAME;
}
- if (lsr & UART_LSR_OE){
+ if (lsr & UART_LSR_OE) {
port->icount.overrun++;
- if (*tty_flag == TTY_NORMAL)
- *tty_flag = TTY_OVERRUN;
+ tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
}
}
@@ -511,12 +510,8 @@ static void ssu100_process_read_urb(struct urb *urb)
if ((len >= 4) &&
(packet[0] == 0x1b) && (packet[1] == 0x1b) &&
((packet[2] == 0x00) || (packet[2] == 0x01))) {
- if (packet[2] == 0x00) {
+ if (packet[2] == 0x00)
ssu100_update_lsr(port, packet[3], &flag);
- if (flag == TTY_OVERRUN)
- tty_insert_flip_char(&port->port, 0,
- TTY_OVERRUN);
- }
if (packet[2] == 0x01)
ssu100_update_msr(port, packet[3]);
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 2fefaf923e4a..18a283d6de1c 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -103,3 +103,10 @@ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
"VL711",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999,
+ "Hitachi",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),