diff options
author | Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2018-04-25 16:50:39 +0200 |
---|---|---|
committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2018-05-08 10:41:38 +0200 |
commit | 0e030a373df3b8792b8991740fc31fe0629c6e58 (patch) | |
tree | ec7618de4b21dd6736f14d6d9d1ad091876ac2c9 /drivers | |
parent | 71c23a821c6bcacba71a094efe49ee689605906b (diff) | |
download | linux-0e030a373df3b8792b8991740fc31fe0629c6e58.tar.bz2 |
can: flexcan: fix endianess detection
In commit 88462d2a7830 ("can: flexcan: Remodel FlexCAN register r/w APIs
for big endian FlexCAN controllers.") the following logic was
implemented:
if the dt property "big-endian" is given or
the device is compatible to "fsl,p1010-flexcan":
use big-endian mode;
else
use little-endian mode;
This relies on commit d50f4630c2e1 ("arm: dts: Remove p1010-flexcan
compatible from imx series dts") which was applied a few commits later.
Without this commit (or an old device tree used for booting a new
kernel) the flexcan devices on i.MX25, i.MX28, i.MX35 and i.MX53 match
the 'the device is compatible to "fsl,p1010-flexcan"' test and so are
switched erroneously to big endian mode.
Instead of the check above put a quirk in devtype data and rely on
of_match_device yielding the most compatible match
Fixes: 88462d2a7830 ("can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers.")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Gavin Schenk <g.schenk@eckelmann.de>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.16
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/can/flexcan.c | 26 |
1 files changed, 14 insertions, 12 deletions
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 634c51e6b8ae..d53a45bf2a72 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -200,6 +200,7 @@ #define FLEXCAN_QUIRK_DISABLE_MECR BIT(4) /* Disable Memory error detection */ #define FLEXCAN_QUIRK_USE_OFF_TIMESTAMP BIT(5) /* Use timestamp based offloading */ #define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6) /* No interrupt for error passive */ +#define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7) /* default to BE register access */ /* Structure of the message buffer */ struct flexcan_mb { @@ -288,6 +289,12 @@ struct flexcan_priv { static const struct flexcan_devtype_data fsl_p1010_devtype_data = { .quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE | + FLEXCAN_QUIRK_BROKEN_PERR_STATE | + FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN, +}; + +static const struct flexcan_devtype_data fsl_imx25_devtype_data = { + .quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE | FLEXCAN_QUIRK_BROKEN_PERR_STATE, }; @@ -1251,9 +1258,9 @@ static void unregister_flexcandev(struct net_device *dev) static const struct of_device_id flexcan_of_match[] = { { .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, }, { .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, }, - { .compatible = "fsl,imx53-flexcan", .data = &fsl_p1010_devtype_data, }, - { .compatible = "fsl,imx35-flexcan", .data = &fsl_p1010_devtype_data, }, - { .compatible = "fsl,imx25-flexcan", .data = &fsl_p1010_devtype_data, }, + { .compatible = "fsl,imx53-flexcan", .data = &fsl_imx25_devtype_data, }, + { .compatible = "fsl,imx35-flexcan", .data = &fsl_imx25_devtype_data, }, + { .compatible = "fsl,imx25-flexcan", .data = &fsl_imx25_devtype_data, }, { .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, }, { .compatible = "fsl,vf610-flexcan", .data = &fsl_vf610_devtype_data, }, { .compatible = "fsl,ls1021ar2-flexcan", .data = &fsl_ls1021a_r2_devtype_data, }, @@ -1337,18 +1344,13 @@ static int flexcan_probe(struct platform_device *pdev) priv = netdev_priv(dev); - if (of_property_read_bool(pdev->dev.of_node, "big-endian")) { + if (of_property_read_bool(pdev->dev.of_node, "big-endian") || + devtype_data->quirks & FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN) { priv->read = flexcan_read_be; priv->write = flexcan_write_be; } else { - if (of_device_is_compatible(pdev->dev.of_node, - "fsl,p1010-flexcan")) { - priv->read = flexcan_read_be; - priv->write = flexcan_write_be; - } else { - priv->read = flexcan_read_le; - priv->write = flexcan_write_le; - } + priv->read = flexcan_read_le; + priv->write = flexcan_write_le; } priv->can.clock.freq = clock_freq; |