Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (48 commits)
  MIPS: Move arch_get_unmapped_area and gang to new file.
  MIPS: Cleanup arch_get_unmapped_area
  MIPS: Octeon: Don't request interrupts for unused IPI mailbox bits.
  Octeon: Fix interrupt irq settings for performance counters.
  MIPS: Fix build warnings on defconfigs
  MIPS: Lemote 2F, Malta: Fix build warning
  MIPS: Set ELF AT_PLATFORM string for Loongson2 processors
  MIPS: Set ELF AT_PLATFORM string for BMIPS processors
  MIPS: Introduce set_elf_platform() helper function
  MIPS: JZ4740: setup: Autodetect physical memory.
  MIPS: BCM47xx: Fix MAC address parsing.
  MIPS: BCM47xx: Extend the filling of SPROM from NVRAM
  MIPS: BCM47xx: Register SSB fallback sprom callback
  MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.
  SSB: Change fallback sprom to callback mechanism.
  MIPS: Alchemy: Clean up GPIO registers and accessors
  MIPS: Alchemy: Cleanup DMA addresses
  MIPS: Alchemy: Rewrite ethernet platform setup
  MIPS: Alchemy: Rewrite UART setup and constants.
  MIPS: Alchemy: Convert dbdma.c to syscore_ops
  ...

17 files changed, 2157 insertions, 34 deletions

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 44b1f46458ca..5069111c81cc 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -260,6 +260,13 @@ config MTD_BCM963XX
 	  Support for parsing CFE image tag and creating MTD partitions on
 	  Broadcom BCM63xx boards.
 
+config MTD_LANTIQ
+	tristate "Lantiq SoC NOR support"
+	depends on LANTIQ
+	select MTD_PARTITIONS
+	help
+	  Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
+
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
 	depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 08533bd5cba7..6adf4c9b9057 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -60,3 +60,4 @@ obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
 obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
 obj-$(CONFIG_MTD_BCM963XX)	+= bcm963xx-flash.o
 obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o
+obj-$(CONFIG_MTD_LANTIQ)	+= lantiq-flash.o
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
new file mode 100644
index 000000000000..a90cabd7b84d
--- /dev/null
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -0,0 +1,251 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+
+/*
+ * The NOR flash is connected to the same external bus unit (EBU) as PCI.
+ * To make PCI work we need to enable the endianness swapping for the address
+ * written to the EBU. This endianness swapping works for PCI correctly but
+ * fails for attached NOR devices. To workaround this we need to use a complex
+ * map. The workaround involves swapping all addresses whilst probing the chip.
+ * Once probing is complete we stop swapping the addresses but swizzle the
+ * unlock addresses to ensure that access to the NOR device works correctly.
+ */
+
+enum {
+	LTQ_NOR_PROBING,
+	LTQ_NOR_NORMAL
+};
+
+struct ltq_mtd {
+	struct resource *res;
+	struct mtd_info *mtd;
+	struct map_info *map;
+};
+
+static char ltq_map_name[] = "ltq_nor";
+
+static map_word
+ltq_read16(struct map_info *map, unsigned long adr)
+{
+	unsigned long flags;
+	map_word temp;
+
+	if (map->map_priv_1 == LTQ_NOR_PROBING)
+		adr ^= 2;
+	spin_lock_irqsave(&ebu_lock, flags);
+	temp.x[0] = *(u16 *)(map->virt + adr);
+	spin_unlock_irqrestore(&ebu_lock, flags);
+	return temp;
+}
+
+static void
+ltq_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+	unsigned long flags;
+
+	if (map->map_priv_1 == LTQ_NOR_PROBING)
+		adr ^= 2;
+	spin_lock_irqsave(&ebu_lock, flags);
+	*(u16 *)(map->virt + adr) = d.x[0];
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+/*
+ * The following 2 functions copy data between iomem and a cached memory
+ * section. As memcpy() makes use of pre-fetching we cannot use it here.
+ * The normal alternative of using memcpy_{to,from}io also makes use of
+ * memcpy() on MIPS so it is not applicable either. We are therefore stuck
+ * with having to use our own loop.
+ */
+static void
+ltq_copy_from(struct map_info *map, void *to,
+	unsigned long from, ssize_t len)
+{
+	unsigned char *f = (unsigned char *)map->virt + from;
+	unsigned char *t = (unsigned char *)to;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	while (len--)
+		*t++ = *f++;
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void
+ltq_copy_to(struct map_info *map, unsigned long to,
+	const void *from, ssize_t len)
+{
+	unsigned char *f = (unsigned char *)from;
+	unsigned char *t = (unsigned char *)map->virt + to;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	while (len--)
+		*t++ = *f++;
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static const char const *part_probe_types[] = { "cmdlinepart", NULL };
+
+static int __init
+ltq_mtd_probe(struct platform_device *pdev)
+{
+	struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
+	struct ltq_mtd *ltq_mtd;
+	struct mtd_partition *parts;
+	struct resource *res;
+	int nr_parts = 0;
+	struct cfi_private *cfi;
+	int err;
+
+	ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL);
+	platform_set_drvdata(pdev, ltq_mtd);
+
+	ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ltq_mtd->res) {
+		dev_err(&pdev->dev, "failed to get memory resource");
+		err = -ENOENT;
+		goto err_out;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, ltq_mtd->res->start,
+		resource_size(ltq_mtd->res), dev_name(&pdev->dev));
+	if (!ltq_mtd->res) {
+		dev_err(&pdev->dev, "failed to request mem resource");
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
+	ltq_mtd->map->phys = res->start;
+	ltq_mtd->map->size = resource_size(res);
+	ltq_mtd->map->virt = devm_ioremap_nocache(&pdev->dev,
+				ltq_mtd->map->phys, ltq_mtd->map->size);
+	if (!ltq_mtd->map->virt) {
+		dev_err(&pdev->dev, "failed to ioremap!\n");
+		err = -ENOMEM;
+		goto err_free;
+	}
+
+	ltq_mtd->map->name = ltq_map_name;
+	ltq_mtd->map->bankwidth = 2;
+	ltq_mtd->map->read = ltq_read16;
+	ltq_mtd->map->write = ltq_write16;
+	ltq_mtd->map->copy_from = ltq_copy_from;
+	ltq_mtd->map->copy_to = ltq_copy_to;
+
+	ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
+	ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
+	ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
+
+	if (!ltq_mtd->mtd) {
+		dev_err(&pdev->dev, "probing failed\n");
+		err = -ENXIO;
+		goto err_unmap;
+	}
+
+	ltq_mtd->mtd->owner = THIS_MODULE;
+
+	cfi = ltq_mtd->map->fldrv_priv;
+	cfi->addr_unlock1 ^= 1;
+	cfi->addr_unlock2 ^= 1;
+
+	nr_parts = parse_mtd_partitions(ltq_mtd->mtd,
+				part_probe_types, &parts, 0);
+	if (nr_parts > 0) {
+		dev_info(&pdev->dev,
+			"using %d partitions from cmdline", nr_parts);
+	} else {
+		nr_parts = ltq_mtd_data->nr_parts;
+		parts = ltq_mtd_data->parts;
+	}
+
+	err = add_mtd_partitions(ltq_mtd->mtd, parts, nr_parts);
+	if (err) {
+		dev_err(&pdev->dev, "failed to add partitions\n");
+		goto err_destroy;
+	}
+
+	return 0;
+
+err_destroy:
+	map_destroy(ltq_mtd->mtd);
+err_unmap:
+	iounmap(ltq_mtd->map->virt);
+err_free:
+	kfree(ltq_mtd->map);
+err_out:
+	kfree(ltq_mtd);
+	return err;
+}
+
+static int __devexit
+ltq_mtd_remove(struct platform_device *pdev)
+{
+	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
+
+	if (ltq_mtd) {
+		if (ltq_mtd->mtd) {
+			del_mtd_partitions(ltq_mtd->mtd);
+			map_destroy(ltq_mtd->mtd);
+		}
+		if (ltq_mtd->map->virt)
+			iounmap(ltq_mtd->map->virt);
+		kfree(ltq_mtd->map);
+		kfree(ltq_mtd);
+	}
+	return 0;
+}
+
+static struct platform_driver ltq_mtd_driver = {
+	.remove = __devexit_p(ltq_mtd_remove),
+	.driver = {
+		.name = "ltq_nor",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init
+init_ltq_mtd(void)
+{
+	int ret = platform_driver_probe(&ltq_mtd_driver, ltq_mtd_probe);
+
+	if (ret)
+		pr_err("ltq_nor: error registering platform driver");
+	return ret;
+}
+
+static void __exit
+exit_ltq_mtd(void)
+{
+	platform_driver_unregister(&ltq_mtd_driver);
+}
+
+module_init(init_ltq_mtd);
+module_exit(exit_ltq_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC NOR");
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 3ffe05db4923..5d513b54a7d7 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -470,7 +471,7 @@ static int __init au1xxx_nand_init(void)
 
 #ifdef CONFIG_MIPS_PB1550
 	/* set gpio206 high */
-	au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
+	gpio_direction_input(206);
 
 	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6c884ef1b069..19f04a34783a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2017,6 +2017,13 @@ config FTMAC100
 	  from Faraday. It is used on Faraday A320, Andes AG101 and some
 	  other ARM/NDS32 SoC's.
 
+config LANTIQ_ETOP
+	tristate "Lantiq SoC ETOP driver"
+	depends on SOC_TYPE_XWAY
+	help
+	  Support for the MII0 inside the Lantiq SoC
+
+
 source "drivers/net/fs_enet/Kconfig"
 
 source "drivers/net/octeon/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index e5a7375685ad..209fbb70619b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -259,6 +259,7 @@ obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 obj-$(CONFIG_ETHOC) += ethoc.o
 obj-$(CONFIG_GRETH) += greth.o
+obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
 
 obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
 
diff --git a/drivers/net/lantiq_etop.c b/drivers/net/lantiq_etop.c
new file mode 100644
index 000000000000..45f252b7da30
--- /dev/null
+++ b/drivers/net/lantiq_etop.c
@@ -0,0 +1,805 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License version 2 as published
+ *   by the Free Software Foundation.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/checksum.h>
+
+#include <lantiq_soc.h>
+#include <xway_dma.h>
+#include <lantiq_platform.h>
+
+#define LTQ_ETOP_MDIO		0x11804
+#define MDIO_REQUEST		0x80000000
+#define MDIO_READ		0x40000000
+#define MDIO_ADDR_MASK		0x1f
+#define MDIO_ADDR_OFFSET	0x15
+#define MDIO_REG_MASK		0x1f
+#define MDIO_REG_OFFSET		0x10
+#define MDIO_VAL_MASK		0xffff
+
+#define PPE32_CGEN		0x800
+#define LQ_PPE32_ENET_MAC_CFG	0x1840
+
+#define LTQ_ETOP_ENETS0		0x11850
+#define LTQ_ETOP_MAC_DA0	0x1186C
+#define LTQ_ETOP_MAC_DA1	0x11870
+#define LTQ_ETOP_CFG		0x16020
+#define LTQ_ETOP_IGPLEN		0x16080
+
+#define MAX_DMA_CHAN		0x8
+#define MAX_DMA_CRC_LEN		0x4
+#define MAX_DMA_DATA_LEN	0x600
+
+#define ETOP_FTCU		BIT(28)
+#define ETOP_MII_MASK		0xf
+#define ETOP_MII_NORMAL		0xd
+#define ETOP_MII_REVERSE	0xe
+#define ETOP_PLEN_UNDER		0x40
+#define ETOP_CGEN		0x800
+
+/* use 2 static channels for TX/RX */
+#define LTQ_ETOP_TX_CHANNEL	1
+#define LTQ_ETOP_RX_CHANNEL	6
+#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
+#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
+
+#define ltq_etop_r32(x)		ltq_r32(ltq_etop_membase + (x))
+#define ltq_etop_w32(x, y)	ltq_w32(x, ltq_etop_membase + (y))
+#define ltq_etop_w32_mask(x, y, z)	\
+		ltq_w32_mask(x, y, ltq_etop_membase + (z))
+
+#define DRV_VERSION	"1.0"
+
+static void __iomem *ltq_etop_membase;
+
+struct ltq_etop_chan {
+	int idx;
+	int tx_free;
+	struct net_device *netdev;
+	struct napi_struct napi;
+	struct ltq_dma_channel dma;
+	struct sk_buff *skb[LTQ_DESC_NUM];
+};
+
+struct ltq_etop_priv {
+	struct net_device *netdev;
+	struct ltq_eth_data *pldata;
+	struct resource *res;
+
+	struct mii_bus *mii_bus;
+	struct phy_device *phydev;
+
+	struct ltq_etop_chan ch[MAX_DMA_CHAN];
+	int tx_free[MAX_DMA_CHAN >> 1];
+
+	spinlock_t lock;
+};
+
+static int
+ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+{
+	ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
+	if (!ch->skb[ch->dma.desc])
+		return -ENOMEM;
+	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+		ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
+		DMA_FROM_DEVICE);
+	ch->dma.desc_base[ch->dma.desc].addr =
+		CPHYSADDR(ch->skb[ch->dma.desc]->data);
+	ch->dma.desc_base[ch->dma.desc].ctl =
+		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+		MAX_DMA_DATA_LEN;
+	skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
+	return 0;
+}
+
+static void
+ltq_etop_hw_receive(struct ltq_etop_chan *ch)
+{
+	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+	struct sk_buff *skb = ch->skb[ch->dma.desc];
+	int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (ltq_etop_alloc_skb(ch)) {
+		netdev_err(ch->netdev,
+			"failed to allocate new rx buffer, stopping DMA\n");
+		ltq_dma_close(&ch->dma);
+	}
+	ch->dma.desc++;
+	ch->dma.desc %= LTQ_DESC_NUM;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	skb_put(skb, len);
+	skb->dev = ch->netdev;
+	skb->protocol = eth_type_trans(skb, ch->netdev);
+	netif_receive_skb(skb);
+}
+
+static int
+ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+{
+	struct ltq_etop_chan *ch = container_of(napi,
+				struct ltq_etop_chan, napi);
+	int rx = 0;
+	int complete = 0;
+
+	while ((rx < budget) && !complete) {
+		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+
+		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+			ltq_etop_hw_receive(ch);
+			rx++;
+		} else {
+			complete = 1;
+		}
+	}
+	if (complete || !rx) {
+		napi_complete(&ch->napi);
+		ltq_dma_ack_irq(&ch->dma);
+	}
+	return rx;
+}
+
+static int
+ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+{
+	struct ltq_etop_chan *ch =
+		container_of(napi, struct ltq_etop_chan, napi);
+	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+	struct netdev_queue *txq =
+		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	while ((ch->dma.desc_base[ch->tx_free].ctl &
+			(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+		dev_kfree_skb_any(ch->skb[ch->tx_free]);
+		ch->skb[ch->tx_free] = NULL;
+		memset(&ch->dma.desc_base[ch->tx_free], 0,
+			sizeof(struct ltq_dma_desc));
+		ch->tx_free++;
+		ch->tx_free %= LTQ_DESC_NUM;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (netif_tx_queue_stopped(txq))
+		netif_tx_start_queue(txq);
+	napi_complete(&ch->napi);
+	ltq_dma_ack_irq(&ch->dma);
+	return 1;
+}
+
+static irqreturn_t
+ltq_etop_dma_irq(int irq, void *_priv)
+{
+	struct ltq_etop_priv *priv = _priv;
+	int ch = irq - LTQ_DMA_CH0_INT;
+
+	napi_schedule(&priv->ch[ch].napi);
+	return IRQ_HANDLED;
+}
+
+static void
+ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	ltq_dma_free(&ch->dma);
+	if (ch->dma.irq)
+		free_irq(ch->dma.irq, priv);
+	if (IS_RX(ch->idx)) {
+		int desc;
+		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+	}
+}
+
+static void
+ltq_etop_hw_exit(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	ltq_pmu_disable(PMU_PPE);
+	for (i = 0; i < MAX_DMA_CHAN; i++)
+		if (IS_TX(i) || IS_RX(i))
+			ltq_etop_free_channel(dev, &priv->ch[i]);
+}
+
+static int
+ltq_etop_hw_init(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	ltq_pmu_enable(PMU_PPE);
+
+	switch (priv->pldata->mii_mode) {
+	case PHY_INTERFACE_MODE_RMII:
+		ltq_etop_w32_mask(ETOP_MII_MASK,
+			ETOP_MII_REVERSE, LTQ_ETOP_CFG);
+		break;
+
+	case PHY_INTERFACE_MODE_MII:
+		ltq_etop_w32_mask(ETOP_MII_MASK,
+			ETOP_MII_NORMAL, LTQ_ETOP_CFG);
+		break;
+
+	default:
+		netdev_err(dev, "unknown mii mode %d\n",
+			priv->pldata->mii_mode);
+		return -ENOTSUPP;
+	}
+
+	/* enable crc generation */
+	ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
+
+	ltq_dma_init_port(DMA_PORT_ETOP);
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		int irq = LTQ_DMA_CH0_INT + i;
+		struct ltq_etop_chan *ch = &priv->ch[i];
+
+		ch->idx = ch->dma.nr = i;
+
+		if (IS_TX(i)) {
+			ltq_dma_alloc_tx(&ch->dma);
+			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+				"etop_tx", priv);
+		} else if (IS_RX(i)) {
+			ltq_dma_alloc_rx(&ch->dma);
+			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+					ch->dma.desc++)
+				if (ltq_etop_alloc_skb(ch))
+					return -ENOMEM;
+			ch->dma.desc = 0;
+			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+				"etop_rx", priv);
+		}
+		ch->dma.irq = irq;
+	}
+	return 0;
+}
+
+static void
+ltq_etop_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, "Lantiq ETOP");
+	strcpy(info->bus_info, "internal");
+	strcpy(info->version, DRV_VERSION);
+}
+
+static int
+ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	return phy_ethtool_gset(priv->phydev, cmd);
+}
+
+static int
+ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	return phy_ethtool_sset(priv->phydev, cmd);
+}
+
+static int
+ltq_etop_nway_reset(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	return phy_start_aneg(priv->phydev);
+}
+
+static const struct ethtool_ops ltq_etop_ethtool_ops = {
+	.get_drvinfo = ltq_etop_get_drvinfo,
+	.get_settings = ltq_etop_get_settings,
+	.set_settings = ltq_etop_set_settings,
+	.nway_reset = ltq_etop_nway_reset,
+};
+
+static int
+ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+{
+	u32 val = MDIO_REQUEST |
+		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
+		phy_data;
+
+	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+		;
+	ltq_etop_w32(val, LTQ_ETOP_MDIO);
+	return 0;
+}
+
+static int
+ltq_etop_mdio_rd(struct mii_bus *bus, int phy_addr, int phy_reg)
+{
+	u32 val = MDIO_REQUEST | MDIO_READ |
+		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
+
+	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+		;
+	ltq_etop_w32(val, LTQ_ETOP_MDIO);
+	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+		;
+	val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
+	return val;
+}
+
+static void
+ltq_etop_mdio_link(struct net_device *dev)
+{
+	/* nothing to do  */
+}
+
+static int
+ltq_etop_mdio_probe(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+	int phy_addr;
+
+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+		if (priv->mii_bus->phy_map[phy_addr]) {
+			phydev = priv->mii_bus->phy_map[phy_addr];
+			break;
+		}
+	}
+
+	if (!phydev) {
+		netdev_err(dev, "no PHY found\n");
+		return -ENODEV;
+	}
+
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &ltq_etop_mdio_link,
+			0, priv->pldata->mii_mode);
+
+	if (IS_ERR(phydev)) {
+		netdev_err(dev, "Could not attach to PHY\n");
+		return PTR_ERR(phydev);
+	}
+
+	phydev->supported &= (SUPPORTED_10baseT_Half
+			      | SUPPORTED_10baseT_Full
+			      | SUPPORTED_100baseT_Half
+			      | SUPPORTED_100baseT_Full
+			      | SUPPORTED_Autoneg
+			      | SUPPORTED_MII
+			      | SUPPORTED_TP);
+
+	phydev->advertising = phydev->supported;
+	priv->phydev = phydev;
+	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+	       dev->name, phydev->drv->name,
+	       dev_name(&phydev->dev), phydev->irq);
+
+	return 0;
+}
+
+static int
+ltq_etop_mdio_init(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+	int err;
+
+	priv->mii_bus = mdiobus_alloc();
+	if (!priv->mii_bus) {
+		netdev_err(dev, "failed to allocate mii bus\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	priv->mii_bus->priv = dev;
+	priv->mii_bus->read = ltq_etop_mdio_rd;
+	priv->mii_bus->write = ltq_etop_mdio_wr;
+	priv->mii_bus->name = "ltq_mii";
+	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+	priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!priv->mii_bus->irq) {
+		err = -ENOMEM;
+		goto err_out_free_mdiobus;
+	}
+
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		priv->mii_bus->irq[i] = PHY_POLL;
+
+	if (mdiobus_register(priv->mii_bus)) {
+		err = -ENXIO;
+		goto err_out_free_mdio_irq;
+	}
+
+	if (ltq_etop_mdio_probe(dev)) {
+		err = -ENXIO;
+		goto err_out_unregister_bus;
+	}
+	return 0;
+
+err_out_unregister_bus:
+	mdiobus_unregister(priv->mii_bus);
+err_out_free_mdio_irq:
+	kfree(priv->mii_bus->irq);
+err_out_free_mdiobus:
+	mdiobus_free(priv->mii_bus);
+err_out:
+	return err;
+}
+
+static void
+ltq_etop_mdio_cleanup(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	phy_disconnect(priv->phydev);
+	mdiobus_unregister(priv->mii_bus);
+	kfree(priv->mii_bus->irq);
+	mdiobus_free(priv->mii_bus);
+}
+
+static int
+ltq_etop_open(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		struct ltq_etop_chan *ch = &priv->ch[i];
+
+		if (!IS_TX(i) && (!IS_RX(i)))
+			continue;
+		ltq_dma_open(&ch->dma);
+		napi_enable(&ch->napi);
+	}
+	phy_start(priv->phydev);
+	netif_tx_start_all_queues(dev);
+	return 0;
+}
+
+static int
+ltq_etop_stop(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	netif_tx_stop_all_queues(dev);
+	phy_stop(priv->phydev);
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		struct ltq_etop_chan *ch = &priv->ch[i];
+
+		if (!IS_RX(i) && !IS_TX(i))
+			continue;
+		napi_disable(&ch->napi);
+		ltq_dma_close(&ch->dma);
+	}
+	return 0;
+}
+
+static int
+ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	int queue = skb_get_queue_mapping(skb);
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+	int len;
+	unsigned long flags;
+	u32 byte_offset;
+
+	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+		dev_kfree_skb_any(skb);
+		netdev_err(dev, "tx ring full\n");
+		netif_tx_stop_queue(txq);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* dma needs to start on a 16 byte aligned address */
+	byte_offset = CPHYSADDR(skb->data) % 16;
+	ch->skb[ch->dma.desc] = skb;
+
+	dev->trans_start = jiffies;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
+						DMA_TO_DEVICE)) - byte_offset;
+	wmb();
+	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+	ch->dma.desc++;
+	ch->dma.desc %= LTQ_DESC_NUM;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
+		netif_tx_stop_queue(txq);
+
+	return NETDEV_TX_OK;
+}
+
+static int
+ltq_etop_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int ret = eth_change_mtu(dev, new_mtu);
+
+	if (!ret) {
+		struct ltq_etop_priv *priv = netdev_priv(dev);
+		unsigned long flags;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
+			LTQ_ETOP_IGPLEN);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	return ret;
+}
+
+static int
+ltq_etop_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	/* TODO: mii-toll reports "No MII transceiver present!." ?!*/
+	return phy_mii_ioctl(priv->phydev, rq, cmd);
+}
+
+static int
+ltq_etop_set_mac_address(struct net_device *dev, void *p)
+{
+	int ret = eth_mac_addr(dev, p);
+
+	if (!ret) {
+		struct ltq_etop_priv *priv = netdev_priv(dev);
+		unsigned long flags;
+
+		/* store the mac for the unicast filter */
+		spin_lock_irqsave(&priv->lock, flags);
+		ltq_etop_w32(*((u32 *)dev->dev_addr), LTQ_ETOP_MAC_DA0);
+		ltq_etop_w32(*((u16 *)&dev->dev_addr[4]) << 16,
+			LTQ_ETOP_MAC_DA1);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	return ret;
+}
+
+static void
+ltq_etop_set_multicast_list(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	/* ensure that the unicast filter is not enabled in promiscious mode */
+	spin_lock_irqsave(&priv->lock, flags);
+	if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI))
+		ltq_etop_w32_mask(ETOP_FTCU, 0, LTQ_ETOP_ENETS0);
+	else
+		ltq_etop_w32_mask(0, ETOP_FTCU, LTQ_ETOP_ENETS0);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static u16
+ltq_etop_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+	/* we are currently only using the first queue */
+	return 0;
+}
+
+static int
+ltq_etop_init(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	struct sockaddr mac;
+	int err;
+
+	ether_setup(dev);
+	dev->watchdog_timeo = 10 * HZ;
+	err = ltq_etop_hw_init(dev);
+	if (err)
+		goto err_hw;
+	ltq_etop_change_mtu(dev, 1500);
+
+	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+	if (!is_valid_ether_addr(mac.sa_data)) {
+		pr_warn("etop: invalid MAC, using random\n");
+		random_ether_addr(mac.sa_data);
+	}
+
+	err = ltq_etop_set_mac_address(dev, &mac);
+	if (err)
+		goto err_netdev;
+	ltq_etop_set_multicast_list(dev);
+	err = ltq_etop_mdio_init(dev);
+	if (err)
+		goto err_netdev;
+	return 0;
+
+err_netdev:
+	unregister_netdev(dev);
+	free_netdev(dev);
+err_hw:
+	ltq_etop_hw_exit(dev);
+	return err;
+}
+
+static void
+ltq_etop_tx_timeout(struct net_device *dev)
+{
+	int err;
+
+	ltq_etop_hw_exit(dev);
+	err = ltq_etop_hw_init(dev);
+	if (err)
+		goto err_hw;
+	dev->trans_start = jiffies;
+	netif_wake_queue(dev);
+	return;
+
+err_hw:
+	ltq_etop_hw_exit(dev);
+	netdev_err(dev, "failed to restart etop after TX timeout\n");
+}
+
+static const struct net_device_ops ltq_eth_netdev_ops = {
+	.ndo_open = ltq_etop_open,
+	.ndo_stop = ltq_etop_stop,
+	.ndo_start_xmit = ltq_etop_tx,
+	.ndo_change_mtu = ltq_etop_change_mtu,
+	.ndo_do_ioctl = ltq_etop_ioctl,
+	.ndo_set_mac_address = ltq_etop_set_mac_address,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_set_multicast_list = ltq_etop_set_multicast_list,
+	.ndo_select_queue = ltq_etop_select_queue,
+	.ndo_init = ltq_etop_init,
+	.ndo_tx_timeout = ltq_etop_tx_timeout,
+};
+
+static int __init
+ltq_etop_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct ltq_etop_priv *priv;
+	struct resource *res;
+	int err;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get etop resource\n");
+		err = -ENOENT;
+		goto err_out;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request etop resource\n");
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	ltq_etop_membase = devm_ioremap_nocache(&pdev->dev,
+		res->start, resource_size(res));
+	if (!ltq_etop_membase) {
+		dev_err(&pdev->dev, "failed to remap etop engine %d\n",
+			pdev->id);
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+	strcpy(dev->name, "eth%d");
+	dev->netdev_ops = &ltq_eth_netdev_ops;
+	dev->ethtool_ops = &ltq_etop_ethtool_ops;
+	priv = netdev_priv(dev);
+	priv->res = res;
+	priv->pldata = dev_get_platdata(&pdev->dev);
+	priv->netdev = dev;
+	spin_lock_init(&priv->lock);
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		if (IS_TX(i))
+			netif_napi_add(dev, &priv->ch[i].napi,
+				ltq_etop_poll_tx, 8);
+		else if (IS_RX(i))
+			netif_napi_add(dev, &priv->ch[i].napi,
+				ltq_etop_poll_rx, 32);
+		priv->ch[i].netdev = dev;
+	}
+
+	err = register_netdev(dev);
+	if (err)
+		goto err_free;
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+
+err_free:
+	kfree(dev);
+err_out:
+	return err;
+}
+
+static int __devexit
+ltq_etop_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	if (dev) {
+		netif_tx_stop_all_queues(dev);
+		ltq_etop_hw_exit(dev);
+		ltq_etop_mdio_cleanup(dev);
+		unregister_netdev(dev);
+	}
+	return 0;
+}
+
+static struct platform_driver ltq_mii_driver = {
+	.remove = __devexit_p(ltq_etop_remove),
+	.driver = {
+		.name = "ltq_etop",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init
+init_ltq_etop(void)
+{
+	int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
+
+	if (ret)
+		pr_err("ltq_etop: Error registering platfom driver!");
+	return ret;
+}
+
+static void __exit
+exit_ltq_etop(void)
+{
+	platform_driver_unregister(&ltq_mii_driver);
+}
+
+module_init(init_ltq_etop);
+module_exit(exit_ltq_etop);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC ETOP");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 6f34963b3c64..7ad48585c5e6 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
 static int ssb_pci_sprom_get(struct ssb_bus *bus,
 			     struct ssb_sprom *sprom)
 {
-	const struct ssb_sprom *fallback;
 	int err;
 	u16 *buf;
 
@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 		if (err) {
 			/* All CRC attempts failed.
 			 * Maybe there is no SPROM on the device?
-			 * If we have a fallback, use that. */
-			fallback = ssb_get_fallback_sprom();
-			if (fallback) {
-				memcpy(sprom, fallback, sizeof(*sprom));
+			 * Now we ask the arch code if there is some sprom
+			 * available for this device in some other storage */
+			err = ssb_fill_sprom_with_fallback(bus, sprom);
+			if (err) {
+				ssb_printk(KERN_WARNING PFX "WARNING: Using"
+					   " fallback SPROM failed (err %d)\n",
+					   err);
+			} else {
+				ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+					    " revision %d provided by"
+					    " platform.\n", sprom->revision);
 				err = 0;
 				goto out_free;
 			}
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index 5f34d7a3e3a5..45ff0e3a3828 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -17,7 +17,7 @@
 #include <linux/slab.h>
 
 
-static const struct ssb_sprom *fallback_sprom;
+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
 
 
 static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
@@ -145,36 +145,43 @@ out:
 }
 
 /**
- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
+ * ssb_arch_register_fallback_sprom - Registers a method providing a
+ * fallback SPROM if no SPROM is found.
  *
- * @sprom: The SPROM data structure to register.
+ * @sprom_callback: The callback function.
  *
- * With this function the architecture implementation may register a fallback
- * SPROM data structure. The fallback is only used for PCI based SSB devices,
- * where no valid SPROM can be found in the shadow registers.
+ * With this function the architecture implementation may register a
+ * callback handler which fills the SPROM data structure. The fallback is
+ * only used for PCI based SSB devices, where no valid SPROM can be found
+ * in the shadow registers.
  *
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
+ * This function is useful for weird architectures that have a half-assed
+ * SSB device hardwired to their PCI bus.
  *
- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
- * don't use this fallback.
- * Architectures must provide the SPROM for native SSB devices anyway,
- * so the fallback also isn't used for native devices.
+ * Note that it does only work with PCI attached SSB devices. PCMCIA
+ * devices currently don't use this fallback.
+ * Architectures must provide the SPROM for native SSB devices anyway, so
+ * the fallback also isn't used for native devices.
  *
- * This function is available for architecture code, only. So it is not exported.
+ * This function is available for architecture code, only. So it is not
+ * exported.
  */
-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
+				     struct ssb_sprom *out))
 {
-	if (fallback_sprom)
+	if (get_fallback_sprom)
 		return -EEXIST;
-	fallback_sprom = sprom;
+	get_fallback_sprom = sprom_callback;
 
 	return 0;
 }
 
-const struct ssb_sprom *ssb_get_fallback_sprom(void)
+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
 {
-	return fallback_sprom;
+	if (!get_fallback_sprom)
+		return -ENOENT;
+
+	return get_fallback_sprom(bus, out);
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index 0331139a726f..77653014db0b 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
 			     const char *buf, size_t count,
 			     int (*sprom_check_crc)(const u16 *sprom, size_t size),
 			     int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
+					struct ssb_sprom *out);
 
 
 /* core.c */
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 80484af781e1..b1f0f83b870d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1391,6 +1391,14 @@ config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
 	help
 	  Support for Console on the NWP serial ports.
 
+config SERIAL_LANTIQ
+	bool "Lantiq serial driver"
+	depends on LANTIQ
+	select SERIAL_CORE
+	select SERIAL_CORE_CONSOLE
+	help
+	  Support for console and UART on Lantiq SoCs.
+
 config SERIAL_QE
 	tristate "Freescale QUICC Engine serial port support"
 	depends on QUICC_ENGINE
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index fee0690ef8e3..35276043d9d1 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
 obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
 obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
+obj-$(CONFIG_SERIAL_LANTIQ)	+= lantiq.o
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
new file mode 100644
index 000000000000..58cf279ed879
--- /dev/null
+++ b/drivers/tty/serial/lantiq.c
@@ -0,0 +1,756 @@
+/*
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Copyright (C) 2004 Infineon IFAP DC COM CPE
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <lantiq_soc.h>
+
+#define PORT_LTQ_ASC		111
+#define MAXPORTS		2
+#define UART_DUMMY_UER_RX	1
+#define DRVNAME			"ltq_asc"
+#ifdef __BIG_ENDIAN
+#define LTQ_ASC_TBUF		(0x0020 + 3)
+#define LTQ_ASC_RBUF		(0x0024 + 3)
+#else
+#define LTQ_ASC_TBUF		0x0020
+#define LTQ_ASC_RBUF		0x0024
+#endif
+#define LTQ_ASC_FSTAT		0x0048
+#define LTQ_ASC_WHBSTATE	0x0018
+#define LTQ_ASC_STATE		0x0014
+#define LTQ_ASC_IRNCR		0x00F8
+#define LTQ_ASC_CLC		0x0000
+#define LTQ_ASC_ID		0x0008
+#define LTQ_ASC_PISEL		0x0004
+#define LTQ_ASC_TXFCON		0x0044
+#define LTQ_ASC_RXFCON		0x0040
+#define LTQ_ASC_CON		0x0010
+#define LTQ_ASC_BG		0x0050
+#define LTQ_ASC_IRNREN		0x00F4
+
+#define ASC_IRNREN_TX		0x1
+#define ASC_IRNREN_RX		0x2
+#define ASC_IRNREN_ERR		0x4
+#define ASC_IRNREN_TX_BUF	0x8
+#define ASC_IRNCR_TIR		0x1
+#define ASC_IRNCR_RIR		0x2
+#define ASC_IRNCR_EIR		0x4
+
+#define ASCOPT_CSIZE		0x3
+#define TXFIFO_FL		1
+#define RXFIFO_FL		1
+#define ASCCLC_DISS		0x2
+#define ASCCLC_RMCMASK		0x0000FF00
+#define ASCCLC_RMCOFFSET	8
+#define ASCCON_M_8ASYNC		0x0
+#define ASCCON_M_7ASYNC		0x2
+#define ASCCON_ODD		0x00000020
+#define ASCCON_STP		0x00000080
+#define ASCCON_BRS		0x00000100
+#define ASCCON_FDE		0x00000200
+#define ASCCON_R		0x00008000
+#define ASCCON_FEN		0x00020000
+#define ASCCON_ROEN		0x00080000
+#define ASCCON_TOEN		0x00100000
+#define ASCSTATE_PE		0x00010000
+#define ASCSTATE_FE		0x00020000
+#define ASCSTATE_ROE		0x00080000
+#define ASCSTATE_ANY		(ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
+#define ASCWHBSTATE_CLRREN	0x00000001
+#define ASCWHBSTATE_SETREN	0x00000002
+#define ASCWHBSTATE_CLRPE	0x00000004
+#define ASCWHBSTATE_CLRFE	0x00000008
+#define ASCWHBSTATE_CLRROE	0x00000020
+#define ASCTXFCON_TXFEN		0x0001
+#define ASCTXFCON_TXFFLU	0x0002
+#define ASCTXFCON_TXFITLMASK	0x3F00
+#define ASCTXFCON_TXFITLOFF	8
+#define ASCRXFCON_RXFEN		0x0001
+#define ASCRXFCON_RXFFLU	0x0002
+#define ASCRXFCON_RXFITLMASK	0x3F00
+#define ASCRXFCON_RXFITLOFF	8
+#define ASCFSTAT_RXFFLMASK	0x003F
+#define ASCFSTAT_TXFFLMASK	0x3F00
+#define ASCFSTAT_TXFREEMASK	0x3F000000
+#define ASCFSTAT_TXFREEOFF	24
+
+static void lqasc_tx_chars(struct uart_port *port);
+static struct ltq_uart_port *lqasc_port[MAXPORTS];
+static struct uart_driver lqasc_reg;
+static DEFINE_SPINLOCK(ltq_asc_lock);
+
+struct ltq_uart_port {
+	struct uart_port	port;
+	struct clk		*clk;
+	unsigned int		tx_irq;
+	unsigned int		rx_irq;
+	unsigned int		err_irq;
+};
+
+static inline struct
+ltq_uart_port *to_ltq_uart_port(struct uart_port *port)
+{
+	return container_of(port, struct ltq_uart_port, port);
+}
+
+static void
+lqasc_stop_tx(struct uart_port *port)
+{
+	return;
+}
+
+static void
+lqasc_start_tx(struct uart_port *port)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	lqasc_tx_chars(port);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	return;
+}
+
+static void
+lqasc_stop_rx(struct uart_port *port)
+{
+	ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
+}
+
+static void
+lqasc_enable_ms(struct uart_port *port)
+{
+}
+
+static int
+lqasc_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+	unsigned int ch = 0, rsr = 0, fifocnt;
+
+	if (!tty) {
+		dev_dbg(port->dev, "%s:tty is busy now", __func__);
+		return -EBUSY;
+	}
+	fifocnt =
+		ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+	while (fifocnt--) {
+		u8 flag = TTY_NORMAL;
+		ch = ltq_r8(port->membase + LTQ_ASC_RBUF);
+		rsr = (ltq_r32(port->membase + LTQ_ASC_STATE)
+			& ASCSTATE_ANY) | UART_DUMMY_UER_RX;
+		tty_flip_buffer_push(tty);
+		port->icount.rx++;
+
+		/*
+		 * Note that the error handling code is
+		 * out of the main execution path
+		 */
+		if (rsr & ASCSTATE_ANY) {
+			if (rsr & ASCSTATE_PE) {
+				port->icount.parity++;
+				ltq_w32_mask(0, ASCWHBSTATE_CLRPE,
+					port->membase + LTQ_ASC_WHBSTATE);
+			} else if (rsr & ASCSTATE_FE) {
+				port->icount.frame++;
+				ltq_w32_mask(0, ASCWHBSTATE_CLRFE,
+					port->membase + LTQ_ASC_WHBSTATE);
+			}
+			if (rsr & ASCSTATE_ROE) {
+				port->icount.overrun++;
+				ltq_w32_mask(0, ASCWHBSTATE_CLRROE,
+					port->membase + LTQ_ASC_WHBSTATE);
+			}
+
+			rsr &= port->read_status_mask;
+
+			if (rsr & ASCSTATE_PE)
+				flag = TTY_PARITY;
+			else if (rsr & ASCSTATE_FE)
+				flag = TTY_FRAME;
+		}
+
+		if ((rsr & port->ignore_status_mask) == 0)
+			tty_insert_flip_char(tty, ch, flag);
+
+		if (rsr & ASCSTATE_ROE)
+			/*
+			 * Overrun is special, since it's reported
+			 * immediately, and doesn't affect the current
+			 * character
+			 */
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	}
+	if (ch != 0)
+		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+	return 0;
+}
+
+static void
+lqasc_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	if (uart_tx_stopped(port)) {
+		lqasc_stop_tx(port);
+		return;
+	}
+
+	while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) &
+		ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
+		if (port->x_char) {
+			ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF);
+			port->icount.tx++;
+			port->x_char = 0;
+			continue;
+		}
+
+		if (uart_circ_empty(xmit))
+			break;
+
+		ltq_w8(port->state->xmit.buf[port->state->xmit.tail],
+			port->membase + LTQ_ASC_TBUF);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static irqreturn_t
+lqasc_tx_int(int irq, void *_port)
+{
+	unsigned long flags;
+	struct uart_port *port = (struct uart_port *)_port;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	lqasc_start_tx(port);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+lqasc_err_int(int irq, void *_port)
+{
+	unsigned long flags;
+	struct uart_port *port = (struct uart_port *)_port;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	/* clear any pending interrupts */
+	ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
+		ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+lqasc_rx_int(int irq, void *_port)
+{
+	unsigned long flags;
+	struct uart_port *port = (struct uart_port *)_port;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
+	lqasc_rx_chars(port);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static unsigned int
+lqasc_tx_empty(struct uart_port *port)
+{
+	int status;
+	status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
+	return status ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int
+lqasc_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
+}
+
+static void
+lqasc_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+}
+
+static void
+lqasc_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static int
+lqasc_startup(struct uart_port *port)
+{
+	struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+	int retval;
+
+	port->uartclk = clk_get_rate(ltq_port->clk);
+
+	ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
+		port->membase + LTQ_ASC_CLC);
+
+	ltq_w32(0, port->membase + LTQ_ASC_PISEL);
+	ltq_w32(
+		((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
+		ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
+		port->membase + LTQ_ASC_TXFCON);
+	ltq_w32(
+		((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
+		| ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
+		port->membase + LTQ_ASC_RXFCON);
+	/* make sure other settings are written to hardware before
+	 * setting enable bits
+	 */
+	wmb();
+	ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
+		ASCCON_ROEN, port->membase + LTQ_ASC_CON);
+
+	retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
+		IRQF_DISABLED, "asc_tx", port);
+	if (retval) {
+		pr_err("failed to request lqasc_tx_int\n");
+		return retval;
+	}
+
+	retval = request_irq(ltq_port->rx_irq, lqasc_rx_int,
+		IRQF_DISABLED, "asc_rx", port);
+	if (retval) {
+		pr_err("failed to request lqasc_rx_int\n");
+		goto err1;
+	}
+
+	retval = request_irq(ltq_port->err_irq, lqasc_err_int,
+		IRQF_DISABLED, "asc_err", port);
+	if (retval) {
+		pr_err("failed to request lqasc_err_int\n");
+		goto err2;
+	}
+
+	ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
+		port->membase + LTQ_ASC_IRNREN);
+	return 0;
+
+err2:
+	free_irq(ltq_port->rx_irq, port);
+err1:
+	free_irq(ltq_port->tx_irq, port);
+	return retval;
+}
+
+static void
+lqasc_shutdown(struct uart_port *port)
+{
+	struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+	free_irq(ltq_port->tx_irq, port);
+	free_irq(ltq_port->rx_irq, port);
+	free_irq(ltq_port->err_irq, port);
+
+	ltq_w32(0, port->membase + LTQ_ASC_CON);
+	ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
+		port->membase + LTQ_ASC_RXFCON);
+	ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
+		port->membase + LTQ_ASC_TXFCON);
+}
+
+static void
+lqasc_set_termios(struct uart_port *port,
+	struct ktermios *new, struct ktermios *old)
+{
+	unsigned int cflag;
+	unsigned int iflag;
+	unsigned int divisor;
+	unsigned int baud;
+	unsigned int con = 0;
+	unsigned long flags;
+
+	cflag = new->c_cflag;
+	iflag = new->c_iflag;
+
+	switch (cflag & CSIZE) {
+	case CS7:
+		con = ASCCON_M_7ASYNC;
+		break;
+
+	case CS5:
+	case CS6:
+	default:
+		new->c_cflag &= ~ CSIZE;
+		new->c_cflag |= CS8;
+		con = ASCCON_M_8ASYNC;
+		break;
+	}
+
+	cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+	if (cflag & CSTOPB)
+		con |= ASCCON_STP;
+
+	if (cflag & PARENB) {
+		if (!(cflag & PARODD))
+			con &= ~ASCCON_ODD;
+		else
+			con |= ASCCON_ODD;
+	}
+
+	port->read_status_mask = ASCSTATE_ROE;
+	if (iflag & INPCK)
+		port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+	port->ignore_status_mask = 0;
+	if (iflag & IGNPAR)
+		port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+	if (iflag & IGNBRK) {
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (iflag & IGNPAR)
+			port->ignore_status_mask |= ASCSTATE_ROE;
+	}
+
+	if ((cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_UER_RX;
+
+	/* set error signals  - framing, parity  and overrun, enable receiver */
+	con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
+
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+
+	/* set up CON */
+	ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON);
+
+	/* Set baud rate - take a divider of 2 into account */
+	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+	divisor = uart_get_divisor(port, baud);
+	divisor = divisor / 2 - 1;
+
+	/* disable the baudrate generator */
+	ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON);
+
+	/* make sure the fractional divider is off */
+	ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);
+
+	/* set up to use divisor of 2 */
+	ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
+
+	/* now we can write the new baudrate into the register */
+	ltq_w32(divisor, port->membase + LTQ_ASC_BG);
+
+	/* turn the baudrate generator back on */
+	ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON);
+
+	/* enable rx */
+	ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
+
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+
+	/* Don't rewrite B0 */
+        if (tty_termios_baud_rate(new))
+		tty_termios_encode_baud_rate(new, baud, baud);
+}
+
+static const char*
+lqasc_type(struct uart_port *port)
+{
+	if (port->type == PORT_LTQ_ASC)
+		return DRVNAME;
+	else
+		return NULL;
+}
+
+static void
+lqasc_release_port(struct uart_port *port)
+{
+	if (port->flags & UPF_IOREMAP) {
+		iounmap(port->membase);
+		port->membase = NULL;
+	}
+}
+
+static int
+lqasc_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *res;
+	int size;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain I/O memory region");
+		return -ENODEV;
+	}
+	size = resource_size(res);
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		size, dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "cannot request I/O memory region");
+		return -EBUSY;
+	}
+
+	if (port->flags & UPF_IOREMAP) {
+		port->membase = devm_ioremap_nocache(&pdev->dev,
+			port->mapbase, size);
+		if (port->membase == NULL)
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+static void
+lqasc_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_LTQ_ASC;
+		lqasc_request_port(port);
+	}
+}
+
+static int
+lqasc_verify_port(struct uart_port *port,
+	struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops lqasc_pops = {
+	.tx_empty =	lqasc_tx_empty,
+	.set_mctrl =	lqasc_set_mctrl,
+	.get_mctrl =	lqasc_get_mctrl,
+	.stop_tx =	lqasc_stop_tx,
+	.start_tx =	lqasc_start_tx,
+	.stop_rx =	lqasc_stop_rx,
+	.enable_ms =	lqasc_enable_ms,
+	.break_ctl =	lqasc_break_ctl,
+	.startup =	lqasc_startup,
+	.shutdown =	lqasc_shutdown,
+	.set_termios =	lqasc_set_termios,
+	.type =		lqasc_type,
+	.release_port =	lqasc_release_port,
+	.request_port =	lqasc_request_port,
+	.config_port =	lqasc_config_port,
+	.verify_port =	lqasc_verify_port,
+};
+
+static void
+lqasc_console_putchar(struct uart_port *port, int ch)
+{
+	int fifofree;
+
+	if (!port->membase)
+		return;
+
+	do {
+		fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT)
+			& ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
+	} while (fifofree == 0);
+	ltq_w8(ch, port->membase + LTQ_ASC_TBUF);
+}
+
+
+static void
+lqasc_console_write(struct console *co, const char *s, u_int count)
+{
+	struct ltq_uart_port *ltq_port;
+	struct uart_port *port;
+	unsigned long flags;
+
+	if (co->index >= MAXPORTS)
+		return;
+
+	ltq_port = lqasc_port[co->index];
+	if (!ltq_port)
+		return;
+
+	port = &ltq_port->port;
+
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	uart_console_write(port, s, count, lqasc_console_putchar);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+}
+
+static int __init
+lqasc_console_setup(struct console *co, char *options)
+{
+	struct ltq_uart_port *ltq_port;
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index >= MAXPORTS)
+		return -ENODEV;
+
+	ltq_port = lqasc_port[co->index];
+	if (!ltq_port)
+		return -ENODEV;
+
+	port = &ltq_port->port;
+
+	port->uartclk = clk_get_rate(ltq_port->clk);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console lqasc_console = {
+	.name =		"ttyLTQ",
+	.write =	lqasc_console_write,
+	.device =	uart_console_device,
+	.setup =	lqasc_console_setup,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+	.data =		&lqasc_reg,
+};
+
+static int __init
+lqasc_console_init(void)
+{
+	register_console(&lqasc_console);
+	return 0;
+}
+console_initcall(lqasc_console_init);
+
+static struct uart_driver lqasc_reg = {
+	.owner =	THIS_MODULE,
+	.driver_name =	DRVNAME,
+	.dev_name =	"ttyLTQ",
+	.major =	0,
+	.minor =	0,
+	.nr =		MAXPORTS,
+	.cons =		&lqasc_console,
+};
+
+static int __init
+lqasc_probe(struct platform_device *pdev)
+{
+	struct ltq_uart_port *ltq_port;
+	struct uart_port *port;
+	struct resource *mmres, *irqres;
+	int tx_irq, rx_irq, err_irq;
+	struct clk *clk;
+	int ret;
+
+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!mmres || !irqres)
+		return -ENODEV;
+
+	if (pdev->id >= MAXPORTS)
+		return -EBUSY;
+
+	if (lqasc_port[pdev->id] != NULL)
+		return -EBUSY;
+
+	clk = clk_get(&pdev->dev, "fpi");
+	if (IS_ERR(clk)) {
+		pr_err("failed to get fpi clk\n");
+		return -ENOENT;
+	}
+
+	tx_irq = platform_get_irq_byname(pdev, "tx");
+	rx_irq = platform_get_irq_byname(pdev, "rx");
+	err_irq = platform_get_irq_byname(pdev, "err");
+	if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0))
+		return -ENODEV;
+
+	ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL);
+	if (!ltq_port)
+		return -ENOMEM;
+
+	port = &ltq_port->port;
+
+	port->iotype	= SERIAL_IO_MEM;
+	port->flags	= ASYNC_BOOT_AUTOCONF | UPF_IOREMAP;
+	port->ops	= &lqasc_pops;
+	port->fifosize	= 16;
+	port->type	= PORT_LTQ_ASC,
+	port->line	= pdev->id;
+	port->dev	= &pdev->dev;
+
+	port->irq	= tx_irq; /* unused, just to be backward-compatibe */
+	port->mapbase	= mmres->start;
+
+	ltq_port->clk	= clk;
+
+	ltq_port->tx_irq = tx_irq;
+	ltq_port->rx_irq = rx_irq;
+	ltq_port->err_irq = err_irq;
+
+	lqasc_port[pdev->id] = ltq_port;
+	platform_set_drvdata(pdev, ltq_port);
+
+	ret = uart_add_one_port(&lqasc_reg, port);
+
+	return ret;
+}
+
+static struct platform_driver lqasc_driver = {
+	.driver		= {
+		.name	= DRVNAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+int __init
+init_lqasc(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&lqasc_reg);
+	if (ret != 0)
+		return ret;
+
+	ret = platform_driver_probe(&lqasc_driver, lqasc_probe);
+	if (ret != 0)
+		uart_unregister_driver(&lqasc_reg);
+
+	return ret;
+}
+
+module_init(init_lqasc);
+
+MODULE_DESCRIPTION("Lantiq serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 1b0f98bc51b5..022f9eb0b7bf 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -990,6 +990,12 @@ config BCM63XX_WDT
 	  To compile this driver as a loadable module, choose M here.
 	  The module will be called bcm63xx_wdt.
 
+config LANTIQ_WDT
+	tristate "Lantiq SoC watchdog"
+	depends on LANTIQ
+	help
+	  Hardware driver for the Lantiq SoC Watchdog Timer.
+
 # PARISC Architecture
 
 # POWERPC Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 3f8608b922a7..ed26f7094e47 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
 obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
 obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
 octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
 
 # PARISC Architecture
 
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
new file mode 100644
index 000000000000..7d82adac1cb2
--- /dev/null
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -0,0 +1,261 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Based on EP93xx wdt driver
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <lantiq.h>
+
+/* Section 3.4 of the datasheet
+ * The password sequence protects the WDT control register from unintended
+ * write actions, which might cause malfunction of the WDT.
+ *
+ * essentially the following two magic passwords need to be written to allow
+ * IO access to the WDT core
+ */
+#define LTQ_WDT_PW1		0x00BE0000
+#define LTQ_WDT_PW2		0x00DC0000
+
+#define LTQ_WDT_CR		0x0	/* watchdog control register */
+#define LTQ_WDT_SR		0x8	/* watchdog status register */
+
+#define LTQ_WDT_SR_EN		(0x1 << 31)	/* enable bit */
+#define LTQ_WDT_SR_PWD		(0x3 << 26)	/* turn on power */
+#define LTQ_WDT_SR_CLKDIV	(0x3 << 24)	/* turn on clock and set */
+						/* divider to 0x40000 */
+#define LTQ_WDT_DIVIDER		0x40000
+#define LTQ_MAX_TIMEOUT		((1 << 16) - 1)	/* the reload field is 16 bit */
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+static void __iomem *ltq_wdt_membase;
+static unsigned long ltq_io_region_clk_rate;
+
+static unsigned long ltq_wdt_bootstatus;
+static unsigned long ltq_wdt_in_use;
+static int ltq_wdt_timeout = 30;
+static int ltq_wdt_ok_to_close;
+
+static void
+ltq_wdt_enable(void)
+{
+	ltq_wdt_timeout = ltq_wdt_timeout *
+			(ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
+	if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT)
+		ltq_wdt_timeout = LTQ_MAX_TIMEOUT;
+
+	/* write the first password magic */
+	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+	/* write the second magic plus the configuration and new timeout */
+	ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
+		LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static void
+ltq_wdt_disable(void)
+{
+	/* write the first password magic */
+	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+	/* write the second password magic with no config
+	 * this turns the watchdog off
+	 */
+	ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static ssize_t
+ltq_wdt_write(struct file *file, const char __user *data,
+		size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			ltq_wdt_ok_to_close = 0;
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					ltq_wdt_ok_to_close = 1;
+				else
+					ltq_wdt_ok_to_close = 0;
+			}
+		}
+		ltq_wdt_enable();
+	}
+
+	return len;
+}
+
+static struct watchdog_info ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			WDIOF_CARDRESET,
+	.identity = "ltq_wdt",
+};
+
+static long
+ltq_wdt_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	int ret = -ENOTTY;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
+				sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(ltq_wdt_bootstatus, (int __user *)arg);
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int __user *)arg);
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(ltq_wdt_timeout, (int __user *)arg);
+		if (!ret)
+			ltq_wdt_enable();
+		/* intentional drop through */
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(ltq_wdt_timeout, (int __user *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		ltq_wdt_enable();
+		ret = 0;
+		break;
+	}
+	return ret;
+}
+
+static int
+ltq_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &ltq_wdt_in_use))
+		return -EBUSY;
+	ltq_wdt_in_use = 1;
+	ltq_wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int
+ltq_wdt_release(struct inode *inode, struct file *file)
+{
+	if (ltq_wdt_ok_to_close)
+		ltq_wdt_disable();
+	else
+		pr_err("ltq_wdt: watchdog closed without warning\n");
+	ltq_wdt_ok_to_close = 0;
+	clear_bit(0, &ltq_wdt_in_use);
+
+	return 0;
+}
+
+static const struct file_operations ltq_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ltq_wdt_write,
+	.unlocked_ioctl	= ltq_wdt_ioctl,
+	.open		= ltq_wdt_open,
+	.release	= ltq_wdt_release,
+	.llseek		= no_llseek,
+};
+
+static struct miscdevice ltq_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &ltq_wdt_fops,
+};
+
+static int __init
+ltq_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct clk *clk;
+
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain I/O memory region");
+		return -ENOENT;
+	}
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "cannot request I/O memory region");
+		return -EBUSY;
+	}
+	ltq_wdt_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+		resource_size(res));
+	if (!ltq_wdt_membase) {
+		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+		return -ENOMEM;
+	}
+
+	/* we do not need to enable the clock as it is always running */
+	clk = clk_get(&pdev->dev, "io");
+	WARN_ON(!clk);
+	ltq_io_region_clk_rate = clk_get_rate(clk);
+	clk_put(clk);
+
+	if (ltq_reset_cause() == LTQ_RST_CAUSE_WDTRST)
+		ltq_wdt_bootstatus = WDIOF_CARDRESET;
+
+	return misc_register(&ltq_wdt_miscdev);
+}
+
+static int __devexit
+ltq_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&ltq_wdt_miscdev);
+
+	if (ltq_wdt_membase)
+		iounmap(ltq_wdt_membase);
+
+	return 0;
+}
+
+
+static struct platform_driver ltq_wdt_driver = {
+	.remove = __devexit_p(ltq_wdt_remove),
+	.driver = {
+		.name = "ltq_wdt",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init
+init_ltq_wdt(void)
+{
+	return platform_driver_probe(&ltq_wdt_driver, ltq_wdt_probe);
+}
+
+static void __exit
+exit_ltq_wdt(void)
+{
+	return platform_driver_unregister(&ltq_wdt_driver);
+}
+
+module_init(init_ltq_wdt);
+module_exit(exit_ltq_wdt);
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 5ec5ac1f7878..1479dc4d6129 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -66,6 +66,7 @@ static struct {
 	int default_ticks;
 	unsigned long inuse;
 	unsigned gpio;
+	int gstate;
 } mtx1_wdt_device;
 
 static void mtx1_wdt_trigger(unsigned long unused)
@@ -75,13 +76,13 @@ static void mtx1_wdt_trigger(unsigned long unused)
 	spin_lock(&mtx1_wdt_device.lock);
 	if (mtx1_wdt_device.running)
 		ticks--;
-	/*
-	 * toggle GPIO2_15
-	 */
-	tmp = au_readl(GPIO2_DIR);
-	tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) |
-	      ((~tmp) & (1 << mtx1_wdt_device.gpio));
-	au_writel(tmp, GPIO2_DIR);
+
+	/* toggle wdt gpio */
+	mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate;
+	if (mtx1_wdt_device.gstate)
+		gpio_direction_output(mtx1_wdt_device.gpio, 1);
+	else
+		gpio_direction_input(mtx1_wdt_device.gpio);
 
 	if (mtx1_wdt_device.queue && ticks)
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
@@ -103,7 +104,8 @@ static void mtx1_wdt_start(void)
 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (!mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 1;
-		gpio_set_value(mtx1_wdt_device.gpio, 1);
+		mtx1_wdt_device.gstate = 1;
+		gpio_direction_output(mtx1_wdt_device.gpio, 1);
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
 	}
 	mtx1_wdt_device.running++;
@@ -117,7 +119,8 @@ static int mtx1_wdt_stop(void)
 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
-		gpio_set_value(mtx1_wdt_device.gpio, 0);
+		mtx1_wdt_device.gstate = 0;
+		gpio_direction_output(mtx1_wdt_device.gpio, 0);
 	}
 	ticks = mtx1_wdt_device.default_ticks;
 	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);