Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (58 commits)
  mfd: Add twl6030 regulator subdevices
  regulator: Add support for twl6030 regulators
  rtc: Add twl6030 RTC support
  mfd: Add support for twl6030 irq framework
  mfd: Rename twl4030_ routines in twl-regulator.c
  mfd: Rename twl4030_ routines in rtc-twl.c
  mfd: Rename all twl4030_i2c*
  mfd: Rename twl4030* driver files to enable re-use
  mfd: Clarify twl4030 return value for read and write
  mfd: Add all twl4030 regulators to the twl4030 mfd driver
  mfd: Don't set mc13783 ADREFMODE for touch conversions
  mfd: Remove ezx-pcap defines for custom led gpio encoding
  mfd: Near complete mc13783 rewrite
  mfd: Remove build time warning for WM835x register default tables
  mfd: Force I2C to be built in when building WM831x
  mfd: Don't allow wm831x to be built as a module
  mfd: Fix incorrect error check for wm8350-core
  mfd: Fix twl4030 warning
  gpiolib: Implement gpio_to_irq() for wm831x
  mfd: Remove default selection of AB4500
  ...

46 files changed, 3919 insertions, 1783 deletions

diff --git a/drivers/gpio/adp5520-gpio.c b/drivers/gpio/adp5520-gpio.c
index ad05bbc7ffd5..0f93105873cd 100644
--- a/drivers/gpio/adp5520-gpio.c
+++ b/drivers/gpio/adp5520-gpio.c
@@ -34,9 +34,9 @@ static int adp5520_gpio_get_value(struct gpio_chip *chip, unsigned off)
 	 */
 
 	if (test_bit(off, &dev->output))
-		adp5520_read(dev->master, GPIO_OUT, &reg_val);
+		adp5520_read(dev->master, ADP5520_GPIO_OUT, &reg_val);
 	else
-		adp5520_read(dev->master, GPIO_IN, &reg_val);
+		adp5520_read(dev->master, ADP5520_GPIO_IN, &reg_val);
 
 	return !!(reg_val & dev->lut[off]);
 }
@@ -48,9 +48,9 @@ static void adp5520_gpio_set_value(struct gpio_chip *chip,
 	dev = container_of(chip, struct adp5520_gpio, gpio_chip);
 
 	if (val)
-		adp5520_set_bits(dev->master, GPIO_OUT, dev->lut[off]);
+		adp5520_set_bits(dev->master, ADP5520_GPIO_OUT, dev->lut[off]);
 	else
-		adp5520_clr_bits(dev->master, GPIO_OUT, dev->lut[off]);
+		adp5520_clr_bits(dev->master, ADP5520_GPIO_OUT, dev->lut[off]);
 }
 
 static int adp5520_gpio_direction_input(struct gpio_chip *chip, unsigned off)
@@ -60,7 +60,8 @@ static int adp5520_gpio_direction_input(struct gpio_chip *chip, unsigned off)
 
 	clear_bit(off, &dev->output);
 
-	return adp5520_clr_bits(dev->master, GPIO_CFG_2, dev->lut[off]);
+	return adp5520_clr_bits(dev->master, ADP5520_GPIO_CFG_2,
+				dev->lut[off]);
 }
 
 static int adp5520_gpio_direction_output(struct gpio_chip *chip,
@@ -73,18 +74,21 @@ static int adp5520_gpio_direction_output(struct gpio_chip *chip,
 	set_bit(off, &dev->output);
 
 	if (val)
-		ret |= adp5520_set_bits(dev->master, GPIO_OUT, dev->lut[off]);
+		ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_OUT,
+					dev->lut[off]);
 	else
-		ret |= adp5520_clr_bits(dev->master, GPIO_OUT, dev->lut[off]);
+		ret |= adp5520_clr_bits(dev->master, ADP5520_GPIO_OUT,
+					dev->lut[off]);
 
-	ret |= adp5520_set_bits(dev->master, GPIO_CFG_2, dev->lut[off]);
+	ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_CFG_2,
+					dev->lut[off]);
 
 	return ret;
 }
 
 static int __devinit adp5520_gpio_probe(struct platform_device *pdev)
 {
-	struct adp5520_gpio_platfrom_data *pdata = pdev->dev.platform_data;
+	struct adp5520_gpio_platform_data *pdata = pdev->dev.platform_data;
 	struct adp5520_gpio *dev;
 	struct gpio_chip *gc;
 	int ret, i, gpios;
@@ -129,20 +133,20 @@ static int __devinit adp5520_gpio_probe(struct platform_device *pdev)
 	gc->label = pdev->name;
 	gc->owner = THIS_MODULE;
 
-	ret = adp5520_clr_bits(dev->master, GPIO_CFG_1,
+	ret = adp5520_clr_bits(dev->master, ADP5520_GPIO_CFG_1,
 		pdata->gpio_en_mask);
 
-	if (pdata->gpio_en_mask & GPIO_C3)
-		ctl_mask |= C3_MODE;
+	if (pdata->gpio_en_mask & ADP5520_GPIO_C3)
+		ctl_mask |= ADP5520_C3_MODE;
 
-	if (pdata->gpio_en_mask & GPIO_R3)
-		ctl_mask |= R3_MODE;
+	if (pdata->gpio_en_mask & ADP5520_GPIO_R3)
+		ctl_mask |= ADP5520_R3_MODE;
 
 	if (ctl_mask)
-		ret = adp5520_set_bits(dev->master, LED_CONTROL,
+		ret = adp5520_set_bits(dev->master, ADP5520_LED_CONTROL,
 			ctl_mask);
 
-	ret |= adp5520_set_bits(dev->master, GPIO_PULLUP,
+	ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_PULLUP,
 		pdata->gpio_pullup_mask);
 
 	if (ret) {
diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c
index 49384a7c5492..7fe881e2bdfb 100644
--- a/drivers/gpio/twl4030-gpio.c
+++ b/drivers/gpio/twl4030-gpio.c
@@ -34,7 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*
@@ -80,7 +80,7 @@ static unsigned int gpio_usage_count;
  */
 static inline int gpio_twl4030_write(u8 address, u8 data)
 {
-	return twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, data, address);
+	return twl_i2c_write_u8(TWL4030_MODULE_GPIO, data, address);
 }
 
 /*----------------------------------------------------------------------*/
@@ -117,7 +117,7 @@ static inline int gpio_twl4030_read(u8 address)
 	u8 data;
 	int ret = 0;
 
-	ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address);
+	ret = twl_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address);
 	return (ret < 0) ? ret : data;
 }
 
@@ -142,7 +142,7 @@ static void twl4030_led_set_value(int led, int value)
 		cached_leden &= ~mask;
 	else
 		cached_leden |= mask;
-	status = twl4030_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
+	status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
 			TWL4030_LED_LEDEN);
 	mutex_unlock(&gpio_lock);
 }
@@ -223,23 +223,23 @@ static int twl_request(struct gpio_chip *chip, unsigned offset)
 		}
 
 		/* initialize PWM to always-drive */
-		status = twl4030_i2c_write_u8(module, 0x7f,
+		status = twl_i2c_write_u8(module, 0x7f,
 				TWL4030_PWMx_PWMxOFF);
 		if (status < 0)
 			goto done;
-		status = twl4030_i2c_write_u8(module, 0x7f,
+		status = twl_i2c_write_u8(module, 0x7f,
 				TWL4030_PWMx_PWMxON);
 		if (status < 0)
 			goto done;
 
 		/* init LED to not-driven (high) */
 		module = TWL4030_MODULE_LED;
-		status = twl4030_i2c_read_u8(module, &cached_leden,
+		status = twl_i2c_read_u8(module, &cached_leden,
 				TWL4030_LED_LEDEN);
 		if (status < 0)
 			goto done;
 		cached_leden &= ~ledclr_mask;
-		status = twl4030_i2c_write_u8(module, cached_leden,
+		status = twl_i2c_write_u8(module, cached_leden,
 				TWL4030_LED_LEDEN);
 		if (status < 0)
 			goto done;
@@ -370,7 +370,7 @@ static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs)
 		message[i] = bit_mask;
 	}
 
-	return twl4030_i2c_write(TWL4030_MODULE_GPIO, message,
+	return twl_i2c_write(TWL4030_MODULE_GPIO, message,
 				REG_GPIOPUPDCTR1, 5);
 }
 
@@ -387,7 +387,7 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
 	debounce >>= 8;
 	message[3] = (debounce & 0x03);
 
-	return twl4030_i2c_write(TWL4030_MODULE_GPIO, message,
+	return twl_i2c_write(TWL4030_MODULE_GPIO, message,
 				REG_GPIO_DEBEN1, 3);
 }
 
diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
index f9c09a54ec7f..b4468b616890 100644
--- a/drivers/gpio/wm831x-gpio.c
+++ b/drivers/gpio/wm831x-gpio.c
@@ -22,8 +22,7 @@
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/pdata.h>
 #include <linux/mfd/wm831x/gpio.h>
-
-#define WM831X_GPIO_MAX 16
+#include <linux/mfd/wm831x/irq.h>
 
 struct wm831x_gpio {
 	struct wm831x *wm831x;
@@ -80,6 +79,17 @@ static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 			value << offset);
 }
 
+static int wm831x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+	if (!wm831x->irq_base)
+		return -EINVAL;
+
+	return wm831x->irq_base + WM831X_IRQ_GPIO_1 + offset;
+}
+
 #ifdef CONFIG_DEBUG_FS
 static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
@@ -175,6 +185,7 @@ static struct gpio_chip template_chip = {
 	.get			= wm831x_gpio_get,
 	.direction_output	= wm831x_gpio_direction_out,
 	.set			= wm831x_gpio_set,
+	.to_irq			= wm831x_gpio_to_irq,
 	.dbg_show		= wm831x_gpio_dbg_show,
 	.can_sleep		= 1,
 };
@@ -192,7 +203,7 @@ static int __devinit wm831x_gpio_probe(struct platform_device *pdev)
 
 	wm831x_gpio->wm831x = wm831x;
 	wm831x_gpio->gpio_chip = template_chip;
-	wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX;
+	wm831x_gpio->gpio_chip.ngpio = wm831x->num_gpio;
 	wm831x_gpio->gpio_chip.dev = &pdev->dev;
 	if (pdata && pdata->gpio_base)
 		wm831x_gpio->gpio_chip.base = pdata->gpio_base;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 203b88a82b56..02c836e11813 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -24,6 +24,16 @@ config KEYBOARD_AAED2000
 	  To compile this driver as a module, choose M here: the
 	  module will be called aaed2000_kbd.
 
+config KEYBOARD_ADP5520
+	tristate "Keypad Support for ADP5520 PMIC"
+	depends on PMIC_ADP5520
+	help
+	  This option enables support for the keypad scan matrix
+	  on Analog Devices ADP5520 PMICs.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called adp5520-keys.
+
 config KEYBOARD_ADP5588
 	tristate "ADP5588 I2C QWERTY Keypad and IO Expander"
 	depends on I2C
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 68c017235ce9..78654ef65206 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -5,6 +5,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
+obj-$(CONFIG_KEYBOARD_ADP5520)		+= adp5520-keys.o
 obj-$(CONFIG_KEYBOARD_ADP5588)		+= adp5588-keys.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
diff --git a/drivers/input/keyboard/adp5520-keys.c b/drivers/input/keyboard/adp5520-keys.c
new file mode 100644
index 000000000000..a7ba27fb4109
--- /dev/null
+++ b/drivers/input/keyboard/adp5520-keys.c
@@ -0,0 +1,220 @@
+/*
+ * Keypad driver for Analog Devices ADP5520 MFD PMICs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/adp5520.h>
+
+struct adp5520_keys {
+	struct input_dev *input;
+	struct notifier_block notifier;
+	struct device *master;
+	unsigned short keycode[ADP5520_KEYMAPSIZE];
+};
+
+static void adp5520_keys_report_event(struct adp5520_keys *dev,
+					unsigned short keymask, int value)
+{
+	int i;
+
+	for (i = 0; i < ADP5520_MAXKEYS; i++)
+		if (keymask & (1 << i))
+			input_report_key(dev->input, dev->keycode[i], value);
+
+	input_sync(dev->input);
+}
+
+static int adp5520_keys_notifier(struct notifier_block *nb,
+				 unsigned long event, void *data)
+{
+	struct adp5520_keys *dev;
+	uint8_t reg_val_lo, reg_val_hi;
+	unsigned short keymask;
+
+	dev = container_of(nb, struct adp5520_keys, notifier);
+
+	if (event & ADP5520_KP_INT) {
+		adp5520_read(dev->master, ADP5520_KP_INT_STAT_1, &reg_val_lo);
+		adp5520_read(dev->master, ADP5520_KP_INT_STAT_2, &reg_val_hi);
+
+		keymask = (reg_val_hi << 8) | reg_val_lo;
+		/* Read twice to clear */
+		adp5520_read(dev->master, ADP5520_KP_INT_STAT_1, &reg_val_lo);
+		adp5520_read(dev->master, ADP5520_KP_INT_STAT_2, &reg_val_hi);
+		keymask |= (reg_val_hi << 8) | reg_val_lo;
+		adp5520_keys_report_event(dev, keymask, 1);
+	}
+
+	if (event & ADP5520_KR_INT) {
+		adp5520_read(dev->master, ADP5520_KR_INT_STAT_1, &reg_val_lo);
+		adp5520_read(dev->master, ADP5520_KR_INT_STAT_2, &reg_val_hi);
+
+		keymask = (reg_val_hi << 8) | reg_val_lo;
+		/* Read twice to clear */
+		adp5520_read(dev->master, ADP5520_KR_INT_STAT_1, &reg_val_lo);
+		adp5520_read(dev->master, ADP5520_KR_INT_STAT_2, &reg_val_hi);
+		keymask |= (reg_val_hi << 8) | reg_val_lo;
+		adp5520_keys_report_event(dev, keymask, 0);
+	}
+
+	return 0;
+}
+
+static int __devinit adp5520_keys_probe(struct platform_device *pdev)
+{
+	struct adp5520_keys_platform_data *pdata = pdev->dev.platform_data;
+	struct input_dev *input;
+	struct adp5520_keys *dev;
+	int ret, i;
+	unsigned char en_mask, ctl_mask = 0;
+
+	if (pdev->id != ID_ADP5520) {
+		dev_err(&pdev->dev, "only ADP5520 supports Keypad\n");
+		return -EINVAL;
+	}
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -EINVAL;
+	}
+
+	if (!(pdata->rows_en_mask && pdata->cols_en_mask))
+		return -EINVAL;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		dev_err(&pdev->dev, "failed to alloc memory\n");
+		return -ENOMEM;
+	}
+
+	input = input_allocate_device();
+	if (!input) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	dev->master = pdev->dev.parent;
+	dev->input = input;
+
+	input->name = pdev->name;
+	input->phys = "adp5520-keys/input0";
+	input->dev.parent = &pdev->dev;
+
+	input_set_drvdata(input, dev);
+
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x5520;
+	input->id.version = 0x0001;
+
+	input->keycodesize = sizeof(dev->keycode[0]);
+	input->keycodemax = pdata->keymapsize;
+	input->keycode = dev->keycode;
+
+	memcpy(dev->keycode, pdata->keymap,
+		pdata->keymapsize * input->keycodesize);
+
+	/* setup input device */
+	__set_bit(EV_KEY, input->evbit);
+
+	if (pdata->repeat)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < input->keycodemax; i++)
+		__set_bit(dev->keycode[i], input->keybit);
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register input device\n");
+		goto err;
+	}
+
+	en_mask = pdata->rows_en_mask | pdata->cols_en_mask;
+
+	ret = adp5520_set_bits(dev->master, ADP5520_GPIO_CFG_1, en_mask);
+
+	if (en_mask & ADP5520_COL_C3)
+		ctl_mask |= ADP5520_C3_MODE;
+
+	if (en_mask & ADP5520_ROW_R3)
+		ctl_mask |= ADP5520_R3_MODE;
+
+	if (ctl_mask)
+		ret |= adp5520_set_bits(dev->master, ADP5520_LED_CONTROL,
+			ctl_mask);
+
+	ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_PULLUP,
+		pdata->rows_en_mask);
+
+	if (ret) {
+		dev_err(&pdev->dev, "failed to write\n");
+		ret = -EIO;
+		goto err1;
+	}
+
+	dev->notifier.notifier_call = adp5520_keys_notifier;
+	ret = adp5520_register_notifier(dev->master, &dev->notifier,
+			ADP5520_KP_IEN | ADP5520_KR_IEN);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register notifier\n");
+		goto err1;
+	}
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+
+err1:
+	input_unregister_device(input);
+	input = NULL;
+err:
+	input_free_device(input);
+	kfree(dev);
+	return ret;
+}
+
+static int __devexit adp5520_keys_remove(struct platform_device *pdev)
+{
+	struct adp5520_keys *dev = platform_get_drvdata(pdev);
+
+	adp5520_unregister_notifier(dev->master, &dev->notifier,
+				ADP5520_KP_IEN | ADP5520_KR_IEN);
+
+	input_unregister_device(dev->input);
+	kfree(dev);
+	return 0;
+}
+
+static struct platform_driver adp5520_keys_driver = {
+	.driver	= {
+		.name	= "adp5520-keys",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= adp5520_keys_probe,
+	.remove		= __devexit_p(adp5520_keys_remove),
+};
+
+static int __init adp5520_keys_init(void)
+{
+	return platform_driver_register(&adp5520_keys_driver);
+}
+module_init(adp5520_keys_init);
+
+static void __exit adp5520_keys_exit(void)
+{
+	platform_driver_unregister(&adp5520_keys_driver);
+}
+module_exit(adp5520_keys_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Keys ADP5520 Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:adp5520-keys");
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 9a2977c21696..eeaa7acb9cfc 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -31,7 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*
@@ -133,7 +133,7 @@ struct twl4030_keypad {
 static int twl4030_kpread(struct twl4030_keypad *kp,
 		u8 *data, u32 reg, u8 num_bytes)
 {
-	int ret = twl4030_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes);
+	int ret = twl_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes);
 
 	if (ret < 0)
 		dev_warn(kp->dbg_dev,
@@ -145,7 +145,7 @@ static int twl4030_kpread(struct twl4030_keypad *kp,
 
 static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg)
 {
-	int ret = twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg);
+	int ret = twl_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg);
 
 	if (ret < 0)
 		dev_warn(kp->dbg_dev,
diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c
index 039dcb00ebd9..008de0c5834b 100644
--- a/drivers/input/misc/pcf50633-input.c
+++ b/drivers/input/misc/pcf50633-input.c
@@ -55,7 +55,6 @@ pcf50633_input_irq(int irq, void *data)
 static int __devinit pcf50633_input_probe(struct platform_device *pdev)
 {
 	struct pcf50633_input *input;
-	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
 	struct input_dev *input_dev;
 	int ret;
 
@@ -71,7 +70,7 @@ static int __devinit pcf50633_input_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, input);
-	input->pcf = pdata->pcf;
+	input->pcf = dev_to_pcf50633(pdev->dev.parent);
 	input->input_dev = input_dev;
 
 	input_dev->name = "PCF50633 PMU events";
@@ -85,9 +84,9 @@ static int __devinit pcf50633_input_probe(struct platform_device *pdev)
 		kfree(input);
 		return ret;
 	}
-	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYR,
+	pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYR,
 				pcf50633_input_irq, input);
-	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYF,
+	pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYF,
 				pcf50633_input_irq, input);
 
 	return 0;
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index f5fc9974a111..bdde5c889035 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -27,7 +27,7 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #define PWR_PWRON_IRQ (1 << 0)
 
@@ -49,7 +49,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
 	local_irq_enable();
 #endif
 
-	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value,
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &value,
 				  STS_HW_CONDITIONS);
 	if (!err)  {
 		input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
diff --git a/drivers/mfd/88pm8607.c b/drivers/mfd/88pm8607.c
new file mode 100644
index 000000000000..7e3f65907993
--- /dev/null
+++ b/drivers/mfd/88pm8607.c
@@ -0,0 +1,302 @@
+/*
+ * Base driver for Marvell 88PM8607
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ * 	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/88pm8607.h>
+
+
+#define PM8607_REG_RESOURCE(_start, _end)		\
+{							\
+	.start	= PM8607_##_start,			\
+	.end	= PM8607_##_end,			\
+	.flags	= IORESOURCE_IO,			\
+}
+
+static struct resource pm8607_regulator_resources[] = {
+	PM8607_REG_RESOURCE(BUCK1, BUCK1),
+	PM8607_REG_RESOURCE(BUCK2, BUCK2),
+	PM8607_REG_RESOURCE(BUCK3, BUCK3),
+	PM8607_REG_RESOURCE(LDO1,  LDO1),
+	PM8607_REG_RESOURCE(LDO2,  LDO2),
+	PM8607_REG_RESOURCE(LDO3,  LDO3),
+	PM8607_REG_RESOURCE(LDO4,  LDO4),
+	PM8607_REG_RESOURCE(LDO5,  LDO5),
+	PM8607_REG_RESOURCE(LDO6,  LDO6),
+	PM8607_REG_RESOURCE(LDO7,  LDO7),
+	PM8607_REG_RESOURCE(LDO8,  LDO8),
+	PM8607_REG_RESOURCE(LDO9,  LDO9),
+	PM8607_REG_RESOURCE(LDO10, LDO10),
+	PM8607_REG_RESOURCE(LDO12, LDO12),
+	PM8607_REG_RESOURCE(LDO14, LDO14),
+};
+
+#define PM8607_REG_DEVS(_name, _id)					\
+{									\
+	.name		= "88pm8607-" #_name,				\
+	.num_resources	= 1,						\
+	.resources	= &pm8607_regulator_resources[PM8607_ID_##_id],	\
+}
+
+static struct mfd_cell pm8607_devs[] = {
+	PM8607_REG_DEVS(buck1, BUCK1),
+	PM8607_REG_DEVS(buck2, BUCK2),
+	PM8607_REG_DEVS(buck3, BUCK3),
+	PM8607_REG_DEVS(ldo1,  LDO1),
+	PM8607_REG_DEVS(ldo2,  LDO2),
+	PM8607_REG_DEVS(ldo3,  LDO3),
+	PM8607_REG_DEVS(ldo4,  LDO4),
+	PM8607_REG_DEVS(ldo5,  LDO5),
+	PM8607_REG_DEVS(ldo6,  LDO6),
+	PM8607_REG_DEVS(ldo7,  LDO7),
+	PM8607_REG_DEVS(ldo8,  LDO8),
+	PM8607_REG_DEVS(ldo9,  LDO9),
+	PM8607_REG_DEVS(ldo10, LDO10),
+	PM8607_REG_DEVS(ldo12, LDO12),
+	PM8607_REG_DEVS(ldo14, LDO14),
+};
+
+static inline int pm8607_read_device(struct pm8607_chip *chip,
+				     int reg, int bytes, void *dest)
+{
+	struct i2c_client *i2c = chip->client;
+	unsigned char data;
+	int ret;
+
+	data = (unsigned char)reg;
+	ret = i2c_master_send(i2c, &data, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_master_recv(i2c, dest, bytes);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static inline int pm8607_write_device(struct pm8607_chip *chip,
+				      int reg, int bytes, void *src)
+{
+	struct i2c_client *i2c = chip->client;
+	unsigned char buf[bytes + 1];
+	int ret;
+
+	buf[0] = (unsigned char)reg;
+	memcpy(&buf[1], src, bytes);
+
+	ret = i2c_master_send(i2c, buf, bytes + 1);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+int pm8607_reg_read(struct pm8607_chip *chip, int reg)
+{
+	unsigned char data;
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = chip->read(chip, reg, 1, &data);
+	mutex_unlock(&chip->io_lock);
+
+	if (ret < 0)
+		return ret;
+	else
+		return (int)data;
+}
+EXPORT_SYMBOL(pm8607_reg_read);
+
+int pm8607_reg_write(struct pm8607_chip *chip, int reg,
+		     unsigned char data)
+{
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = chip->write(chip, reg, 1, &data);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(pm8607_reg_write);
+
+int pm8607_bulk_read(struct pm8607_chip *chip, int reg,
+		     int count, unsigned char *buf)
+{
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = chip->read(chip, reg, count, buf);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(pm8607_bulk_read);
+
+int pm8607_bulk_write(struct pm8607_chip *chip, int reg,
+		      int count, unsigned char *buf)
+{
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = chip->write(chip, reg, count, buf);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(pm8607_bulk_write);
+
+int pm8607_set_bits(struct pm8607_chip *chip, int reg,
+		    unsigned char mask, unsigned char data)
+{
+	unsigned char value;
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = chip->read(chip, reg, 1, &value);
+	if (ret < 0)
+		goto out;
+	value &= ~mask;
+	value |= data;
+	ret = chip->write(chip, reg, 1, &value);
+out:
+	mutex_unlock(&chip->io_lock);
+	return ret;
+}
+EXPORT_SYMBOL(pm8607_set_bits);
+
+
+static const struct i2c_device_id pm8607_id_table[] = {
+	{ "88PM8607", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, pm8607_id_table);
+
+
+static int __devinit pm8607_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct pm8607_platform_data *pdata = client->dev.platform_data;
+	struct pm8607_chip *chip;
+	int i, count;
+	int ret;
+
+	chip = kzalloc(sizeof(struct pm8607_chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	chip->client = client;
+	chip->dev = &client->dev;
+	chip->read = pm8607_read_device;
+	chip->write = pm8607_write_device;
+	i2c_set_clientdata(client, chip);
+
+	mutex_init(&chip->io_lock);
+	dev_set_drvdata(chip->dev, chip);
+
+	ret = pm8607_reg_read(chip, PM8607_CHIP_ID);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
+		goto out;
+	}
+	if ((ret & CHIP_ID_MASK) == CHIP_ID)
+		dev_info(chip->dev, "Marvell 88PM8607 (ID: %02x) detected\n",
+			 ret);
+	else {
+		dev_err(chip->dev, "Failed to detect Marvell 88PM8607. "
+			"Chip ID: %02x\n", ret);
+		goto out;
+	}
+	chip->chip_id = ret;
+
+	ret = pm8607_reg_read(chip, PM8607_BUCK3);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read BUCK3 register: %d\n", ret);
+		goto out;
+	}
+	if (ret & PM8607_BUCK3_DOUBLE)
+		chip->buck3_double = 1;
+
+	ret = pm8607_reg_read(chip, PM8607_MISC1);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read MISC1 register: %d\n", ret);
+		goto out;
+	}
+	if (pdata->i2c_port == PI2C_PORT)
+		ret |= PM8607_MISC1_PI2C;
+	else
+		ret &= ~PM8607_MISC1_PI2C;
+	ret = pm8607_reg_write(chip, PM8607_MISC1, ret);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to write MISC1 register: %d\n", ret);
+		goto out;
+	}
+
+
+	count = ARRAY_SIZE(pm8607_devs);
+	for (i = 0; i < count; i++) {
+		ret = mfd_add_devices(chip->dev, i, &pm8607_devs[i],
+				      1, NULL, 0);
+		if (ret != 0) {
+			dev_err(chip->dev, "Failed to add subdevs\n");
+			goto out;
+		}
+	}
+
+	return 0;
+
+out:
+	i2c_set_clientdata(client, NULL);
+	kfree(chip);
+	return ret;
+}
+
+static int __devexit pm8607_remove(struct i2c_client *client)
+{
+	struct pm8607_chip *chip = i2c_get_clientdata(client);
+
+	mfd_remove_devices(chip->dev);
+	kfree(chip);
+	return 0;
+}
+
+static struct i2c_driver pm8607_driver = {
+	.driver	= {
+		.name	= "88PM8607",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pm8607_probe,
+	.remove		= __devexit_p(pm8607_remove),
+	.id_table	= pm8607_id_table,
+};
+
+static int __init pm8607_init(void)
+{
+	int ret;
+	ret = i2c_add_driver(&pm8607_driver);
+	if (ret != 0)
+		pr_err("Failed to register 88PM8607 I2C driver: %d\n", ret);
+	return ret;
+}
+subsys_initcall(pm8607_init);
+
+static void __exit pm8607_exit(void)
+{
+	i2c_del_driver(&pm8607_driver);
+}
+module_exit(pm8607_exit);
+
+MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM8607");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a296e717e86e..87829789243e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -103,10 +103,10 @@ config MENELAUS
 	  cell phones and PDAs.
 
 config TWL4030_CORE
-	bool "Texas Instruments TWL4030/TPS659x0 Support"
+	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
 	depends on I2C=y && GENERIC_HARDIRQS
 	help
-	  Say yes here if you have TWL4030 family chip on your board.
+	  Say yes here if you have TWL4030 / TWL6030 family chip on your board.
 	  This core driver provides register access and IRQ handling
 	  facilities, and registers devices for the various functions
 	  so that function-specific drivers can bind to them.
@@ -174,6 +174,16 @@ config PMIC_DA903X
 	  individual components like LCD backlight, voltage regulators,
 	  LEDs and battery-charger under the corresponding menus.
 
+config PMIC_ADP5520
+	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
+	depends on I2C=y
+	help
+	  Say yes here to add support for Analog Devices AD5520 and ADP5501,
+	  Multifunction Power Management IC. This includes
+	  the I2C driver and the core APIs _only_, you have to select
+	  individual components like LCD backlight, LEDs, GPIOs and Kepad
+	  under the corresponding menus.
+
 config MFD_WM8400
 	tristate "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
@@ -185,12 +195,12 @@ config MFD_WM8400
 	  the functionality of the device.
 
 config MFD_WM831X
-	tristate "Support Wolfson Microelectronics WM831x PMICs"
+	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
 	select MFD_CORE
-	depends on I2C
+	depends on I2C=y
 	help
-	  Support for the Wolfson Microelecronics WM831x PMICs.  This
-	  driver provides common support for accessing the device,
+	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
+	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
@@ -319,6 +329,25 @@ config EZX_PCAP
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
+config MFD_88PM8607
+	bool "Support Marvell 88PM8607"
+	depends on I2C=y
+	select MFD_CORE
+	help
+	  This supports for Marvell 88PM8607 Power Management IC. This includes
+	  the I2C driver and the core APIs _only_, you have to select
+	  individual components like voltage regulators, RTC and
+	  battery-charger under the corresponding menus.
+
+config AB4500_CORE
+	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
+	depends on SPI
+	help
+	  Select this option to enable access to AB4500 power management
+	  chip. This connects to U8500 on the SSP/SPI bus and exports
+	  read/write functions for the devices to get access to this chip.
+	  This chip embeds various other multimedia funtionalities as well.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 11350c1d9301..ca2f2c4ff05e 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -19,13 +19,14 @@ obj-$(CONFIG_MFD_WM8400)	+= wm8400-core.o
 wm831x-objs			:= wm831x-core.o wm831x-irq.o wm831x-otp.o
 obj-$(CONFIG_MFD_WM831X)	+= wm831x.o
 wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
+wm8350-objs			+= wm8350-irq.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
 
-obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
+obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
 obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
 obj-$(CONFIG_TWL4030_CODEC)	+= twl4030-codec.o
 
@@ -52,3 +53,6 @@ obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
 obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
+obj-$(CONFIG_AB4500_CORE)	+= ab4500-core.o
+obj-$(CONFIG_MFD_88PM8607)	+= 88pm8607.o
+obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
\ No newline at end of file
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 613481028272..fd42a80e7bf9 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -900,9 +900,6 @@ static int __init ab3100_probe(struct i2c_client *client,
 		goto exit_no_testreg_client;
 	}
 
-	strlcpy(ab3100->testreg_client->name, id->name,
-		sizeof(ab3100->testreg_client->name));
-
 	err = ab3100_setup(ab3100);
 	if (err)
 		goto exit_no_setup;
diff --git a/drivers/mfd/ab4500-core.c b/drivers/mfd/ab4500-core.c
new file mode 100644
index 000000000000..1c44c19e073a
--- /dev/null
+++ b/drivers/mfd/ab4500-core.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation.
+ *
+ * AB4500 is a companion power management chip used with U8500.
+ * On this platform, this is interfaced with SSP0 controller
+ * which is a ARM primecell pl022.
+ *
+ * At the moment the module just exports read/write features.
+ * Interrupt management to be added - TODO.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/ab4500.h>
+
+/* just required if probe fails, we need to
+ * unregister the device
+ */
+static struct spi_driver ab4500_driver;
+
+/*
+ * This funtion writes to any AB4500 registers using
+ * SPI protocol &  before it writes it packs the data
+ * in the below 24 bit frame format
+ *
+ *	 *|------------------------------------|
+ *	 *| 23|22...18|17.......10|9|8|7......0|
+ *	 *| r/w  bank       adr          data  |
+ *	 * ------------------------------------
+ *
+ * This function shouldn't be called from interrupt
+ * context
+ */
+int ab4500_write(struct ab4500 *ab4500, unsigned char block,
+		unsigned long addr, unsigned char data)
+{
+	struct spi_transfer xfer;
+	struct spi_message	msg;
+	int err;
+	unsigned long spi_data =
+		block << 18 | addr << 10 | data;
+
+	mutex_lock(&ab4500->lock);
+	ab4500->tx_buf[0] = spi_data;
+	ab4500->rx_buf[0] = 0;
+
+	xfer.tx_buf	= ab4500->tx_buf;
+	xfer.rx_buf 	= NULL;
+	xfer.len	= sizeof(unsigned long);
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	err = spi_sync(ab4500->spi, &msg);
+	mutex_unlock(&ab4500->lock);
+
+	return err;
+}
+EXPORT_SYMBOL(ab4500_write);
+
+int ab4500_read(struct ab4500 *ab4500, unsigned char block,
+		unsigned long addr)
+{
+	struct spi_transfer xfer;
+	struct spi_message	msg;
+	unsigned long spi_data =
+		1 << 23 | block << 18 | addr << 10;
+
+	mutex_lock(&ab4500->lock);
+	ab4500->tx_buf[0] = spi_data;
+	ab4500->rx_buf[0] = 0;
+
+	xfer.tx_buf	= ab4500->tx_buf;
+	xfer.rx_buf 	= ab4500->rx_buf;
+	xfer.len	= sizeof(unsigned long);
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	spi_sync(ab4500->spi, &msg);
+	mutex_unlock(&ab4500->lock);
+
+	return  ab4500->rx_buf[0];
+}
+EXPORT_SYMBOL(ab4500_read);
+
+/* ref: ab3100 core */
+#define AB4500_DEVICE(devname, devid)				\
+static struct platform_device ab4500_##devname##_device = {	\
+	.name	= devid,					\
+	.id	= -1,						\
+}
+
+/* list of childern devices of ab4500 - all are
+ * not populated here - TODO
+ */
+AB4500_DEVICE(charger, "ab4500-charger");
+AB4500_DEVICE(audio, "ab4500-audio");
+AB4500_DEVICE(usb, "ab4500-usb");
+AB4500_DEVICE(tvout, "ab4500-tvout");
+AB4500_DEVICE(sim, "ab4500-sim");
+AB4500_DEVICE(gpadc, "ab4500-gpadc");
+AB4500_DEVICE(clkmgt, "ab4500-clkmgt");
+AB4500_DEVICE(misc, "ab4500-misc");
+
+static struct platform_device *ab4500_platform_devs[] = {
+	&ab4500_charger_device,
+	&ab4500_audio_device,
+	&ab4500_usb_device,
+	&ab4500_tvout_device,
+	&ab4500_sim_device,
+	&ab4500_gpadc_device,
+	&ab4500_clkmgt_device,
+	&ab4500_misc_device,
+};
+
+static int __init ab4500_probe(struct spi_device *spi)
+{
+	struct ab4500	*ab4500;
+	unsigned char revision;
+	int err = 0;
+	int i;
+
+	ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL);
+	if (!ab4500) {
+		dev_err(&spi->dev, "could not allocate AB4500\n");
+		err = -ENOMEM;
+		goto not_detect;
+	}
+
+	ab4500->spi = spi;
+	spi_set_drvdata(spi, ab4500);
+
+	mutex_init(&ab4500->lock);
+
+	/* read the revision register */
+	revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG);
+
+	/* revision id 0x0 is for early drop, 0x10 is for cut1.0 */
+	if (revision == 0x0 || revision == 0x10)
+		dev_info(&spi->dev, "Detected chip: %s, revision = %x\n",
+			ab4500_driver.driver.name, revision);
+	else	{
+		dev_err(&spi->dev, "unknown chip: 0x%x\n", revision);
+		goto not_detect;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++)	{
+		ab4500_platform_devs[i]->dev.parent =
+			&spi->dev;
+		platform_set_drvdata(ab4500_platform_devs[i], ab4500);
+	}
+
+	/* register the ab4500 platform devices */
+	platform_add_devices(ab4500_platform_devs,
+			ARRAY_SIZE(ab4500_platform_devs));
+
+	return err;
+
+ not_detect:
+	spi_unregister_driver(&ab4500_driver);
+	kfree(ab4500);
+	return err;
+}
+
+static int __devexit ab4500_remove(struct spi_device *spi)
+{
+	struct ab4500 *ab4500 =
+		spi_get_drvdata(spi);
+
+	kfree(ab4500);
+
+	return 0;
+}
+
+static struct spi_driver ab4500_driver = {
+	.driver = {
+		.name = "ab4500",
+		.owner = THIS_MODULE,
+	},
+	.probe = ab4500_probe,
+	.remove = __devexit_p(ab4500_remove)
+};
+
+static int __devinit ab4500_init(void)
+{
+	return spi_register_driver(&ab4500_driver);
+}
+
+static void __exit ab4500_exit(void)
+{
+	spi_unregister_driver(&ab4500_driver);
+}
+
+subsys_initcall(ab4500_init);
+module_exit(ab4500_exit);
+
+MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
+MODULE_DESCRIPTION("AB4500 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
new file mode 100644
index 000000000000..b26644772d02
--- /dev/null
+++ b/drivers/mfd/adp5520.c
@@ -0,0 +1,379 @@
+/*
+ * Base driver for Analog Devices ADP5520/ADP5501 MFD PMICs
+ * LCD Backlight: drivers/video/backlight/adp5520_bl
+ * LEDs		: drivers/led/leds-adp5520
+ * GPIO		: drivers/gpio/adp5520-gpio (ADP5520 only)
+ * Keys		: drivers/input/keyboard/adp5520-keys (ADP5520 only)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Derived from da903x:
+ * Copyright (C) 2008 Compulab, Ltd.
+ * 	Mike Rapoport <mike@compulab.co.il>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * 	Eric Miao <eric.miao@marvell.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/adp5520.h>
+
+struct adp5520_chip {
+	struct i2c_client *client;
+	struct device *dev;
+	struct mutex lock;
+	struct blocking_notifier_head notifier_list;
+	int irq;
+	unsigned long id;
+};
+
+static int __adp5520_read(struct i2c_client *client,
+				int reg, uint8_t *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+		return ret;
+	}
+
+	*val = (uint8_t)ret;
+	return 0;
+}
+
+static int __adp5520_write(struct i2c_client *client,
+				 int reg, uint8_t val)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed writing 0x%02x to 0x%02x\n",
+				val, reg);
+		return ret;
+	}
+	return 0;
+}
+
+static int __adp5520_ack_bits(struct i2c_client *client, int reg,
+			      uint8_t bit_mask)
+{
+	struct adp5520_chip *chip = i2c_get_clientdata(client);
+	uint8_t reg_val;
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = __adp5520_read(client, reg, &reg_val);
+
+	if (!ret) {
+		reg_val |= bit_mask;
+		ret = __adp5520_write(client, reg, reg_val);
+	}
+
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+int adp5520_write(struct device *dev, int reg, uint8_t val)
+{
+	return __adp5520_write(to_i2c_client(dev), reg, val);
+}
+EXPORT_SYMBOL_GPL(adp5520_write);
+
+int adp5520_read(struct device *dev, int reg, uint8_t *val)
+{
+	return __adp5520_read(to_i2c_client(dev), reg, val);
+}
+EXPORT_SYMBOL_GPL(adp5520_read);
+
+int adp5520_set_bits(struct device *dev, int reg, uint8_t bit_mask)
+{
+	struct adp5520_chip *chip = dev_get_drvdata(dev);
+	uint8_t reg_val;
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = __adp5520_read(chip->client, reg, &reg_val);
+
+	if (!ret && ((reg_val & bit_mask) == 0)) {
+		reg_val |= bit_mask;
+		ret = __adp5520_write(chip->client, reg, reg_val);
+	}
+
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adp5520_set_bits);
+
+int adp5520_clr_bits(struct device *dev, int reg, uint8_t bit_mask)
+{
+	struct adp5520_chip *chip = dev_get_drvdata(dev);
+	uint8_t reg_val;
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = __adp5520_read(chip->client, reg, &reg_val);
+
+	if (!ret && (reg_val & bit_mask)) {
+		reg_val &= ~bit_mask;
+		ret = __adp5520_write(chip->client, reg, reg_val);
+	}
+
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(adp5520_clr_bits);
+
+int adp5520_register_notifier(struct device *dev, struct notifier_block *nb,
+				unsigned int events)
+{
+	struct adp5520_chip *chip = dev_get_drvdata(dev);
+
+	if (chip->irq) {
+		adp5520_set_bits(chip->dev, ADP5520_INTERRUPT_ENABLE,
+			events & (ADP5520_KP_IEN | ADP5520_KR_IEN |
+			ADP5520_OVP_IEN | ADP5520_CMPR_IEN));
+
+		return blocking_notifier_chain_register(&chip->notifier_list,
+			 nb);
+	}
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(adp5520_register_notifier);
+
+int adp5520_unregister_notifier(struct device *dev, struct notifier_block *nb,
+				unsigned int events)
+{
+	struct adp5520_chip *chip = dev_get_drvdata(dev);
+
+	adp5520_clr_bits(chip->dev, ADP5520_INTERRUPT_ENABLE,
+		events & (ADP5520_KP_IEN | ADP5520_KR_IEN |
+		ADP5520_OVP_IEN | ADP5520_CMPR_IEN));
+
+	return blocking_notifier_chain_unregister(&chip->notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(adp5520_unregister_notifier);
+
+static irqreturn_t adp5520_irq_thread(int irq, void *data)
+{
+	struct adp5520_chip *chip = data;
+	unsigned int events;
+	uint8_t reg_val;
+	int ret;
+
+	ret = __adp5520_read(chip->client, ADP5520_MODE_STATUS, &reg_val);
+	if (ret)
+		goto out;
+
+	events =  reg_val & (ADP5520_OVP_INT | ADP5520_CMPR_INT |
+		ADP5520_GPI_INT | ADP5520_KR_INT | ADP5520_KP_INT);
+
+	blocking_notifier_call_chain(&chip->notifier_list, events, NULL);
+	/* ACK, Sticky bits are W1C */
+	__adp5520_ack_bits(chip->client, ADP5520_MODE_STATUS, events);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int __remove_subdev(struct device *dev, void *unused)
+{
+	platform_device_unregister(to_platform_device(dev));
+	return 0;
+}
+
+static int adp5520_remove_subdevs(struct adp5520_chip *chip)
+{
+	return device_for_each_child(chip->dev, NULL, __remove_subdev);
+}
+
+static int __devinit adp5520_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct adp5520_platform_data *pdata = client->dev.platform_data;
+	struct platform_device *pdev;
+	struct adp5520_chip *chip;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "SMBUS Word Data not Supported\n");
+		return -EIO;
+	}
+
+	if (pdata == NULL) {
+		dev_err(&client->dev, "missing platform data\n");
+		return -ENODEV;
+	}
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+	chip->client = client;
+
+	chip->dev = &client->dev;
+	chip->irq = client->irq;
+	chip->id = id->driver_data;
+	mutex_init(&chip->lock);
+
+	if (chip->irq) {
+		BLOCKING_INIT_NOTIFIER_HEAD(&chip->notifier_list);
+
+		ret = request_threaded_irq(chip->irq, NULL, adp5520_irq_thread,
+				IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				"adp5520", chip);
+		if (ret) {
+			dev_err(&client->dev, "failed to request irq %d\n",
+					chip->irq);
+			goto out_free_chip;
+		}
+	}
+
+	ret = adp5520_write(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY);
+	if (ret) {
+		dev_err(&client->dev, "failed to write\n");
+		goto out_free_irq;
+	}
+
+	if (pdata->keys) {
+		pdev = platform_device_register_data(chip->dev, "adp5520-keys",
+				chip->id, pdata->keys, sizeof(*pdata->keys));
+		if (IS_ERR(pdev)) {
+			ret = PTR_ERR(pdev);
+			goto out_remove_subdevs;
+		}
+	}
+
+	if (pdata->gpio) {
+		pdev = platform_device_register_data(chip->dev, "adp5520-gpio",
+				chip->id, pdata->gpio, sizeof(*pdata->gpio));
+		if (IS_ERR(pdev)) {
+			ret = PTR_ERR(pdev);
+			goto out_remove_subdevs;
+		}
+	}
+
+	if (pdata->leds) {
+		pdev = platform_device_register_data(chip->dev, "adp5520-led",
+				chip->id, pdata->leds, sizeof(*pdata->leds));
+		if (IS_ERR(pdev)) {
+			ret = PTR_ERR(pdev);
+			goto out_remove_subdevs;
+		}
+	}
+
+	if (pdata->backlight) {
+		pdev = platform_device_register_data(chip->dev,
+						"adp5520-backlight",
+						chip->id,
+						pdata->backlight,
+						sizeof(*pdata->backlight));
+		if (IS_ERR(pdev)) {
+			ret = PTR_ERR(pdev);
+			goto out_remove_subdevs;
+		}
+	}
+
+	return 0;
+
+out_remove_subdevs:
+	adp5520_remove_subdevs(chip);
+
+out_free_irq:
+	if (chip->irq)
+		free_irq(chip->irq, chip);
+
+out_free_chip:
+	i2c_set_clientdata(client, NULL);
+	kfree(chip);
+
+	return ret;
+}
+
+static int __devexit adp5520_remove(struct i2c_client *client)
+{
+	struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
+
+	if (chip->irq)
+		free_irq(chip->irq, chip);
+
+	adp5520_remove_subdevs(chip);
+	adp5520_write(chip->dev, ADP5520_MODE_STATUS, 0);
+	i2c_set_clientdata(client, NULL);
+	kfree(chip);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp5520_suspend(struct i2c_client *client,
+				 pm_message_t state)
+{
+	struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
+
+	adp5520_clr_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY);
+	return 0;
+}
+
+static int adp5520_resume(struct i2c_client *client)
+{
+	struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
+
+	adp5520_set_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY);
+	return 0;
+}
+#else
+#define adp5520_suspend	NULL
+#define adp5520_resume	NULL
+#endif
+
+static const struct i2c_device_id adp5520_id[] = {
+	{ "pmic-adp5520", ID_ADP5520 },
+	{ "pmic-adp5501", ID_ADP5501 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adp5520_id);
+
+static struct i2c_driver adp5520_driver = {
+	.driver = {
+		.name	= "adp5520",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= adp5520_probe,
+	.remove		= __devexit_p(adp5520_remove),
+	.suspend	= adp5520_suspend,
+	.resume		= adp5520_resume,
+	.id_table 	= adp5520_id,
+};
+
+static int __init adp5520_init(void)
+{
+	return i2c_add_driver(&adp5520_driver);
+}
+module_init(adp5520_init);
+
+static void __exit adp5520_exit(void)
+{
+	i2c_del_driver(&adp5520_driver);
+}
+module_exit(adp5520_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5520(01) PMIC-MFD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 63a2a6632106..e22128c3e9a8 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -908,7 +908,7 @@ static int __init asic3_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int asic3_remove(struct platform_device *pdev)
+static int __devexit asic3_remove(struct platform_device *pdev)
 {
 	int ret;
 	struct asic3 *asic = platform_get_drvdata(pdev);
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index 876288917976..df405af968fa 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -387,7 +387,6 @@ static int __devinit pcap_add_subdev(struct pcap_chip *pcap,
 	pdev = platform_device_alloc(subdev->name, subdev->id);
 	pdev->dev.parent = &pcap->spi->dev;
 	pdev->dev.platform_data = subdev->platform_data;
-	platform_set_drvdata(pdev, pcap);
 
 	return platform_device_add(pdev);
 }
diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c
index e354d2912ef1..a1ade2324ea9 100644
--- a/drivers/mfd/mc13783-core.c
+++ b/drivers/mfd/mc13783-core.c
@@ -1,286 +1,549 @@
 /*
- * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This code is in parts based on wm8350-core.c and pcf50633-core.c
- *
- * Initial development of this code was funded by
- * Phytec Messtechnik GmbH, http://www.phytec.de
+ * Copyright 2009 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * loosely based on an earlier driver that has
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
  */
-
-#include <linux/mfd/mc13783-private.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/core.h>
-#include <linux/spi/spi.h>
-#include <linux/uaccess.h>
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/mc13783-private.h>
+
+#define MC13783_IRQSTAT0	0
+#define MC13783_IRQSTAT0_ADCDONEI	(1 << 0)
+#define MC13783_IRQSTAT0_ADCBISDONEI	(1 << 1)
+#define MC13783_IRQSTAT0_TSI		(1 << 2)
+#define MC13783_IRQSTAT0_WHIGHI		(1 << 3)
+#define MC13783_IRQSTAT0_WLOWI		(1 << 4)
+#define MC13783_IRQSTAT0_CHGDETI	(1 << 6)
+#define MC13783_IRQSTAT0_CHGOVI		(1 << 7)
+#define MC13783_IRQSTAT0_CHGREVI	(1 << 8)
+#define MC13783_IRQSTAT0_CHGSHORTI	(1 << 9)
+#define MC13783_IRQSTAT0_CCCVI		(1 << 10)
+#define MC13783_IRQSTAT0_CHGCURRI	(1 << 11)
+#define MC13783_IRQSTAT0_BPONI		(1 << 12)
+#define MC13783_IRQSTAT0_LOBATLI	(1 << 13)
+#define MC13783_IRQSTAT0_LOBATHI	(1 << 14)
+#define MC13783_IRQSTAT0_UDPI		(1 << 15)
+#define MC13783_IRQSTAT0_USBI		(1 << 16)
+#define MC13783_IRQSTAT0_IDI		(1 << 19)
+#define MC13783_IRQSTAT0_SE1I		(1 << 21)
+#define MC13783_IRQSTAT0_CKDETI		(1 << 22)
+#define MC13783_IRQSTAT0_UDMI		(1 << 23)
+
+#define MC13783_IRQMASK0	1
+#define MC13783_IRQMASK0_ADCDONEM	MC13783_IRQSTAT0_ADCDONEI
+#define MC13783_IRQMASK0_ADCBISDONEM	MC13783_IRQSTAT0_ADCBISDONEI
+#define MC13783_IRQMASK0_TSM		MC13783_IRQSTAT0_TSI
+#define MC13783_IRQMASK0_WHIGHM		MC13783_IRQSTAT0_WHIGHI
+#define MC13783_IRQMASK0_WLOWM		MC13783_IRQSTAT0_WLOWI
+#define MC13783_IRQMASK0_CHGDETM	MC13783_IRQSTAT0_CHGDETI
+#define MC13783_IRQMASK0_CHGOVM		MC13783_IRQSTAT0_CHGOVI
+#define MC13783_IRQMASK0_CHGREVM	MC13783_IRQSTAT0_CHGREVI
+#define MC13783_IRQMASK0_CHGSHORTM	MC13783_IRQSTAT0_CHGSHORTI
+#define MC13783_IRQMASK0_CCCVM		MC13783_IRQSTAT0_CCCVI
+#define MC13783_IRQMASK0_CHGCURRM	MC13783_IRQSTAT0_CHGCURRI
+#define MC13783_IRQMASK0_BPONM		MC13783_IRQSTAT0_BPONI
+#define MC13783_IRQMASK0_LOBATLM	MC13783_IRQSTAT0_LOBATLI
+#define MC13783_IRQMASK0_LOBATHM	MC13783_IRQSTAT0_LOBATHI
+#define MC13783_IRQMASK0_UDPM		MC13783_IRQSTAT0_UDPI
+#define MC13783_IRQMASK0_USBM		MC13783_IRQSTAT0_USBI
+#define MC13783_IRQMASK0_IDM		MC13783_IRQSTAT0_IDI
+#define MC13783_IRQMASK0_SE1M		MC13783_IRQSTAT0_SE1I
+#define MC13783_IRQMASK0_CKDETM		MC13783_IRQSTAT0_CKDETI
+#define MC13783_IRQMASK0_UDMM		MC13783_IRQSTAT0_UDMI
+
+#define MC13783_IRQSTAT1	3
+#define MC13783_IRQSTAT1_1HZI		(1 << 0)
+#define MC13783_IRQSTAT1_TODAI		(1 << 1)
+#define MC13783_IRQSTAT1_ONOFD1I	(1 << 3)
+#define MC13783_IRQSTAT1_ONOFD2I	(1 << 4)
+#define MC13783_IRQSTAT1_ONOFD3I	(1 << 5)
+#define MC13783_IRQSTAT1_SYSRSTI	(1 << 6)
+#define MC13783_IRQSTAT1_RTCRSTI	(1 << 7)
+#define MC13783_IRQSTAT1_PCI		(1 << 8)
+#define MC13783_IRQSTAT1_WARMI		(1 << 9)
+#define MC13783_IRQSTAT1_MEMHLDI	(1 << 10)
+#define MC13783_IRQSTAT1_PWRRDYI	(1 << 11)
+#define MC13783_IRQSTAT1_THWARNLI	(1 << 12)
+#define MC13783_IRQSTAT1_THWARNHI	(1 << 13)
+#define MC13783_IRQSTAT1_CLKI		(1 << 14)
+#define MC13783_IRQSTAT1_SEMAFI		(1 << 15)
+#define MC13783_IRQSTAT1_MC2BI		(1 << 17)
+#define MC13783_IRQSTAT1_HSDETI		(1 << 18)
+#define MC13783_IRQSTAT1_HSLI		(1 << 19)
+#define MC13783_IRQSTAT1_ALSPTHI	(1 << 20)
+#define MC13783_IRQSTAT1_AHSSHORTI	(1 << 21)
+
+#define MC13783_IRQMASK1	4
+#define MC13783_IRQMASK1_1HZM		MC13783_IRQSTAT1_1HZI
+#define MC13783_IRQMASK1_TODAM		MC13783_IRQSTAT1_TODAI
+#define MC13783_IRQMASK1_ONOFD1M	MC13783_IRQSTAT1_ONOFD1I
+#define MC13783_IRQMASK1_ONOFD2M	MC13783_IRQSTAT1_ONOFD2I
+#define MC13783_IRQMASK1_ONOFD3M	MC13783_IRQSTAT1_ONOFD3I
+#define MC13783_IRQMASK1_SYSRSTM	MC13783_IRQSTAT1_SYSRSTI
+#define MC13783_IRQMASK1_RTCRSTM	MC13783_IRQSTAT1_RTCRSTI
+#define MC13783_IRQMASK1_PCM		MC13783_IRQSTAT1_PCI
+#define MC13783_IRQMASK1_WARMM		MC13783_IRQSTAT1_WARMI
+#define MC13783_IRQMASK1_MEMHLDM	MC13783_IRQSTAT1_MEMHLDI
+#define MC13783_IRQMASK1_PWRRDYM	MC13783_IRQSTAT1_PWRRDYI
+#define MC13783_IRQMASK1_THWARNLM	MC13783_IRQSTAT1_THWARNLI
+#define MC13783_IRQMASK1_THWARNHM	MC13783_IRQSTAT1_THWARNHI
+#define MC13783_IRQMASK1_CLKM		MC13783_IRQSTAT1_CLKI
+#define MC13783_IRQMASK1_SEMAFM		MC13783_IRQSTAT1_SEMAFI
+#define MC13783_IRQMASK1_MC2BM		MC13783_IRQSTAT1_MC2BI
+#define MC13783_IRQMASK1_HSDETM		MC13783_IRQSTAT1_HSDETI
+#define MC13783_IRQMASK1_HSLM		MC13783_IRQSTAT1_HSLI
+#define MC13783_IRQMASK1_ALSPTHM	MC13783_IRQSTAT1_ALSPTHI
+#define MC13783_IRQMASK1_AHSSHORTM	MC13783_IRQSTAT1_AHSSHORTI
+
+#define MC13783_ADC1		44
+#define MC13783_ADC1_ADEN		(1 << 0)
+#define MC13783_ADC1_RAND		(1 << 1)
+#define MC13783_ADC1_ADSEL		(1 << 3)
+#define MC13783_ADC1_ASC		(1 << 20)
+#define MC13783_ADC1_ADTRIGIGN		(1 << 21)
+
+#define MC13783_NUMREGS 0x3f
+
+void mc13783_lock(struct mc13783 *mc13783)
+{
+	if (!mutex_trylock(&mc13783->lock)) {
+		dev_dbg(&mc13783->spidev->dev, "wait for %s from %pf\n",
+				__func__, __builtin_return_address(0));
+
+		mutex_lock(&mc13783->lock);
+	}
+	dev_dbg(&mc13783->spidev->dev, "%s from %pf\n",
+			__func__, __builtin_return_address(0));
+}
+EXPORT_SYMBOL(mc13783_lock);
 
-#define MC13783_MAX_REG_NUM	0x3f
-#define MC13783_FRAME_MASK	0x00ffffff
-#define MC13783_MAX_REG_NUM	0x3f
-#define MC13783_REG_NUM_SHIFT	0x19
-#define MC13783_WRITE_BIT_SHIFT	31
+void mc13783_unlock(struct mc13783 *mc13783)
+{
+	dev_dbg(&mc13783->spidev->dev, "%s from %pf\n",
+			__func__, __builtin_return_address(0));
+	mutex_unlock(&mc13783->lock);
+}
+EXPORT_SYMBOL(mc13783_unlock);
 
-static inline int spi_rw(struct spi_device *spi, u8 * buf, size_t len)
+#define MC13783_REGOFFSET_SHIFT 25
+int mc13783_reg_read(struct mc13783 *mc13783, unsigned int offset, u32 *val)
 {
-	struct spi_transfer t = {
-		.tx_buf = (const void *)buf,
-		.rx_buf = buf,
-		.len = len,
-		.cs_change = 0,
-		.delay_usecs = 0,
-	};
+	struct spi_transfer t;
 	struct spi_message m;
+	int ret;
+
+	BUG_ON(!mutex_is_locked(&mc13783->lock));
+
+	if (offset > MC13783_NUMREGS)
+		return -EINVAL;
+
+	*val = offset << MC13783_REGOFFSET_SHIFT;
+
+	memset(&t, 0, sizeof(t));
+
+	t.tx_buf = val;
+	t.rx_buf = val;
+	t.len = sizeof(u32);
 
 	spi_message_init(&m);
 	spi_message_add_tail(&t, &m);
-	if (spi_sync(spi, &m) != 0 || m.status != 0)
-		return -EINVAL;
-	return len - m.actual_length;
-}
 
-static int mc13783_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val)
-{
-	unsigned int frame = 0;
-	int ret = 0;
+	ret = spi_sync(mc13783->spidev, &m);
 
-	if (reg_num > MC13783_MAX_REG_NUM)
-		return -EINVAL;
+	/* error in message.status implies error return from spi_sync */
+	BUG_ON(!ret && m.status);
 
-	frame |= reg_num << MC13783_REG_NUM_SHIFT;
+	if (ret)
+		return ret;
 
-	ret = spi_rw(mc13783->spi_device, (u8 *)&frame, 4);
+	*val &= 0xffffff;
 
-	*reg_val = frame & MC13783_FRAME_MASK;
+	dev_vdbg(&mc13783->spidev->dev, "[0x%02x] -> 0x%06x\n", offset, *val);
 
-	return ret;
+	return 0;
 }
+EXPORT_SYMBOL(mc13783_reg_read);
 
-static int mc13783_write(struct mc13783 *mc13783, int reg_num, u32 reg_val)
+int mc13783_reg_write(struct mc13783 *mc13783, unsigned int offset, u32 val)
 {
-	unsigned int frame = 0;
+	u32 buf;
+	struct spi_transfer t;
+	struct spi_message m;
+	int ret;
+
+	BUG_ON(!mutex_is_locked(&mc13783->lock));
 
-	if (reg_num > MC13783_MAX_REG_NUM)
+	dev_vdbg(&mc13783->spidev->dev, "[0x%02x] <- 0x%06x\n", offset, val);
+
+	if (offset > MC13783_NUMREGS || val > 0xffffff)
 		return -EINVAL;
 
-	frame |= (1 << MC13783_WRITE_BIT_SHIFT);
-	frame |= reg_num << MC13783_REG_NUM_SHIFT;
-	frame |= reg_val & MC13783_FRAME_MASK;
+	buf = 1 << 31 | offset << MC13783_REGOFFSET_SHIFT | val;
+
+	memset(&t, 0, sizeof(t));
 
-	return spi_rw(mc13783->spi_device, (u8 *)&frame, 4);
+	t.tx_buf = &buf;
+	t.rx_buf = &buf;
+	t.len = sizeof(u32);
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+
+	ret = spi_sync(mc13783->spidev, &m);
+
+	BUG_ON(!ret && m.status);
+
+	if (ret)
+		return ret;
+
+	return 0;
 }
+EXPORT_SYMBOL(mc13783_reg_write);
 
-int mc13783_reg_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val)
+int mc13783_reg_rmw(struct mc13783 *mc13783, unsigned int offset,
+		u32 mask, u32 val)
 {
 	int ret;
+	u32 valread;
 
-	mutex_lock(&mc13783->io_lock);
-	ret = mc13783_read(mc13783, reg_num, reg_val);
-	mutex_unlock(&mc13783->io_lock);
+	BUG_ON(val & ~mask);
 
-	return ret;
+	ret = mc13783_reg_read(mc13783, offset, &valread);
+	if (ret)
+		return ret;
+
+	valread = (valread & ~mask) | val;
+
+	return mc13783_reg_write(mc13783, offset, valread);
 }
-EXPORT_SYMBOL_GPL(mc13783_reg_read);
+EXPORT_SYMBOL(mc13783_reg_rmw);
 
-int mc13783_reg_write(struct mc13783 *mc13783, int reg_num, u32 reg_val)
+int mc13783_mask(struct mc13783 *mc13783, int irq)
 {
 	int ret;
+	unsigned int offmask = irq < 24 ? MC13783_IRQMASK0 : MC13783_IRQMASK1;
+	u32 irqbit = 1 << (irq < 24 ? irq : irq - 24);
+	u32 mask;
 
-	mutex_lock(&mc13783->io_lock);
-	ret = mc13783_write(mc13783, reg_num, reg_val);
-	mutex_unlock(&mc13783->io_lock);
+	if (irq < 0 || irq >= MC13783_NUM_IRQ)
+		return -EINVAL;
 
-	return ret;
+	ret = mc13783_reg_read(mc13783, offmask, &mask);
+	if (ret)
+		return ret;
+
+	if (mask & irqbit)
+		/* already masked */
+		return 0;
+
+	return mc13783_reg_write(mc13783, offmask, mask | irqbit);
 }
-EXPORT_SYMBOL_GPL(mc13783_reg_write);
+EXPORT_SYMBOL(mc13783_mask);
 
-/**
- * mc13783_set_bits - Bitmask write
- *
- * @mc13783: Pointer to mc13783 control structure
- * @reg:    Register to access
- * @mask:   Mask of bits to change
- * @val:    Value to set for masked bits
- */
-int mc13783_set_bits(struct mc13783 *mc13783, int reg, u32 mask, u32 val)
+int mc13783_unmask(struct mc13783 *mc13783, int irq)
 {
-	u32 tmp;
 	int ret;
+	unsigned int offmask = irq < 24 ? MC13783_IRQMASK0 : MC13783_IRQMASK1;
+	u32 irqbit = 1 << (irq < 24 ? irq : irq - 24);
+	u32 mask;
 
-	mutex_lock(&mc13783->io_lock);
+	if (irq < 0 || irq >= MC13783_NUM_IRQ)
+		return -EINVAL;
 
-	ret = mc13783_read(mc13783, reg, &tmp);
-	tmp = (tmp & ~mask) | val;
-	if (ret == 0)
-		ret = mc13783_write(mc13783, reg, tmp);
+	ret = mc13783_reg_read(mc13783, offmask, &mask);
+	if (ret)
+		return ret;
 
-	mutex_unlock(&mc13783->io_lock);
+	if (!(mask & irqbit))
+		/* already unmasked */
+		return 0;
 
-	return ret;
+	return mc13783_reg_write(mc13783, offmask, mask & ~irqbit);
 }
-EXPORT_SYMBOL_GPL(mc13783_set_bits);
+EXPORT_SYMBOL(mc13783_unmask);
 
-int mc13783_register_irq(struct mc13783 *mc13783, int irq,
-		void (*handler) (int, void *), void *data)
+int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq,
+		irq_handler_t handler, const char *name, void *dev)
 {
-	if (irq < 0 || irq > MC13783_NUM_IRQ || !handler)
+	BUG_ON(!mutex_is_locked(&mc13783->lock));
+	BUG_ON(!handler);
+
+	if (irq < 0 || irq >= MC13783_NUM_IRQ)
 		return -EINVAL;
 
-	if (WARN_ON(mc13783->irq_handler[irq].handler))
+	if (mc13783->irqhandler[irq])
 		return -EBUSY;
 
-	mutex_lock(&mc13783->io_lock);
-	mc13783->irq_handler[irq].handler = handler;
-	mc13783->irq_handler[irq].data = data;
-	mutex_unlock(&mc13783->io_lock);
+	mc13783->irqhandler[irq] = handler;
+	mc13783->irqdata[irq] = dev;
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(mc13783_register_irq);
+EXPORT_SYMBOL(mc13783_irq_request_nounmask);
 
-int mc13783_free_irq(struct mc13783 *mc13783, int irq)
+int mc13783_irq_request(struct mc13783 *mc13783, int irq,
+		irq_handler_t handler, const char *name, void *dev)
 {
-	if (irq < 0 || irq > MC13783_NUM_IRQ)
+	int ret;
+
+	ret = mc13783_irq_request_nounmask(mc13783, irq, handler, name, dev);
+	if (ret)
+		return ret;
+
+	ret = mc13783_unmask(mc13783, irq);
+	if (ret) {
+		mc13783->irqhandler[irq] = NULL;
+		mc13783->irqdata[irq] = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mc13783_irq_request);
+
+int mc13783_irq_free(struct mc13783 *mc13783, int irq, void *dev)
+{
+	int ret;
+	BUG_ON(!mutex_is_locked(&mc13783->lock));
+
+	if (irq < 0 || irq >= MC13783_NUM_IRQ || !mc13783->irqhandler[irq] ||
+			mc13783->irqdata[irq] != dev)
 		return -EINVAL;
 
-	mutex_lock(&mc13783->io_lock);
-	mc13783->irq_handler[irq].handler = NULL;
-	mutex_unlock(&mc13783->io_lock);
+	ret = mc13783_mask(mc13783, irq);
+	if (ret)
+		return ret;
+
+	mc13783->irqhandler[irq] = NULL;
+	mc13783->irqdata[irq] = NULL;
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(mc13783_free_irq);
+EXPORT_SYMBOL(mc13783_irq_free);
 
-static void mc13783_irq_work(struct work_struct *work)
+static inline irqreturn_t mc13783_irqhandler(struct mc13783 *mc13783, int irq)
 {
-	struct mc13783 *mc13783 = container_of(work, struct mc13783, work);
-	int i;
-	unsigned int adc_sts;
-
-	/* check if the adc has finished any completion */
-	mc13783_reg_read(mc13783, MC13783_REG_INTERRUPT_STATUS_0, &adc_sts);
-	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0,
-			adc_sts & MC13783_INT_STAT_ADCDONEI);
-
-	if (adc_sts & MC13783_INT_STAT_ADCDONEI)
-		complete_all(&mc13783->adc_done);
-
-	for (i = 0; i < MC13783_NUM_IRQ; i++)
-		if (mc13783->irq_handler[i].handler)
-			mc13783->irq_handler[i].handler(i,
-					mc13783->irq_handler[i].data);
-	enable_irq(mc13783->irq);
+	return mc13783->irqhandler[irq](irq, mc13783->irqdata[irq]);
 }
 
-static irqreturn_t mc13783_interrupt(int irq, void *dev_id)
+int mc13783_ackirq(struct mc13783 *mc13783, int irq)
 {
-	struct mc13783 *mc13783 = dev_id;
+	unsigned int offstat = irq < 24 ? MC13783_IRQSTAT0 : MC13783_IRQSTAT1;
+	unsigned int val = 1 << (irq < 24 ? irq : irq - 24);
 
-	disable_irq_nosync(irq);
+	BUG_ON(irq < 0 || irq >= MC13783_NUM_IRQ);
 
-	schedule_work(&mc13783->work);
-	return IRQ_HANDLED;
+	return mc13783_reg_write(mc13783, offstat, val);
 }
+EXPORT_SYMBOL(mc13783_ackirq);
 
-/* set adc to ts interrupt mode, which generates touchscreen wakeup interrupt */
-static inline void mc13783_adc_set_ts_irq_mode(struct mc13783 *mc13783)
+/*
+ * returns: number of handled irqs or negative error
+ * locking: holds mc13783->lock
+ */
+static int mc13783_irq_handle(struct mc13783 *mc13783,
+		unsigned int offstat, unsigned int offmask, int baseirq)
 {
-	unsigned int reg_adc0, reg_adc1;
+	u32 stat, mask;
+	int ret = mc13783_reg_read(mc13783, offstat, &stat);
+	int num_handled = 0;
+
+	if (ret)
+		return ret;
+
+	ret = mc13783_reg_read(mc13783, offmask, &mask);
+	if (ret)
+		return ret;
+
+	while (stat & ~mask) {
+		int irq = __ffs(stat & ~mask);
+
+		stat &= ~(1 << irq);
+
+		if (likely(mc13783->irqhandler[baseirq + irq])) {
+			irqreturn_t handled;
 
-	reg_adc0 = MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE
-			| MC13783_ADC0_TSMOD0;
-	reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN;
+			handled = mc13783_irqhandler(mc13783, baseirq + irq);
+			if (handled == IRQ_HANDLED)
+				num_handled++;
+		} else {
+			dev_err(&mc13783->spidev->dev,
+					"BUG: irq %u but no handler\n",
+					baseirq + irq);
 
-	mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0);
-	mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1);
+			mask |= 1 << irq;
+
+			ret = mc13783_reg_write(mc13783, offmask, mask);
+		}
+	}
+
+	return num_handled;
 }
 
+static irqreturn_t mc13783_irq_thread(int irq, void *data)
+{
+	struct mc13783 *mc13783 = data;
+	irqreturn_t ret;
+	int handled = 0;
+
+	mc13783_lock(mc13783);
+
+	ret = mc13783_irq_handle(mc13783, MC13783_IRQSTAT0,
+			MC13783_IRQMASK0, MC13783_IRQ_ADCDONE);
+	if (ret > 0)
+		handled = 1;
+
+	ret = mc13783_irq_handle(mc13783, MC13783_IRQSTAT1,
+			MC13783_IRQMASK1, MC13783_IRQ_1HZ);
+	if (ret > 0)
+		handled = 1;
+
+	mc13783_unlock(mc13783);
+
+	return IRQ_RETVAL(handled);
+}
+
+#define MC13783_ADC1_CHAN0_SHIFT	5
+#define MC13783_ADC1_CHAN1_SHIFT	8
+
+struct mc13783_adcdone_data {
+	struct mc13783 *mc13783;
+	struct completion done;
+};
+
+static irqreturn_t mc13783_handler_adcdone(int irq, void *data)
+{
+	struct mc13783_adcdone_data *adcdone_data = data;
+
+	mc13783_ackirq(adcdone_data->mc13783, irq);
+
+	complete_all(&adcdone_data->done);
+
+	return IRQ_HANDLED;
+}
+
+#define MC13783_ADC_WORKING (1 << 16)
+
 int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
 		unsigned int channel, unsigned int *sample)
 {
-	unsigned int reg_adc0, reg_adc1;
-	int i;
+	u32 adc0, adc1, old_adc0;
+	int i, ret;
+	struct mc13783_adcdone_data adcdone_data = {
+		.mc13783 = mc13783,
+	};
+	init_completion(&adcdone_data.done);
+
+	dev_dbg(&mc13783->spidev->dev, "%s\n", __func__);
+
+	mc13783_lock(mc13783);
+
+	if (mc13783->flags & MC13783_ADC_WORKING) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	mc13783->flags |= MC13783_ADC_WORKING;
 
-	mutex_lock(&mc13783->adc_conv_lock);
+	mc13783_reg_read(mc13783, MC13783_ADC0, &old_adc0);
 
-	/* set up auto incrementing anyway to make quick read */
-	reg_adc0 =  MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2;
-	/* enable the adc, ignore external triggering and set ASC to trigger
-	 * conversion */
-	reg_adc1 =  MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN
-		| MC13783_ADC1_ASC;
+	adc0 = MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2;
+	adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN | MC13783_ADC1_ASC;
 
-	/* setup channel number */
 	if (channel > 7)
-		reg_adc1 |= MC13783_ADC1_ADSEL;
+		adc1 |= MC13783_ADC1_ADSEL;
 
 	switch (mode) {
 	case MC13783_ADC_MODE_TS:
-		/* enables touch screen reference mode and set touchscreen mode
-		 * to position mode */
-		reg_adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE
-			| MC13783_ADC0_TSMOD0 | MC13783_ADC0_TSMOD1;
-		reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+		adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_TSMOD0 |
+			MC13783_ADC0_TSMOD1;
+		adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
 		break;
+
 	case MC13783_ADC_MODE_SINGLE_CHAN:
-		reg_adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT;
-		reg_adc1 |= MC13783_ADC1_RAND;
+		adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
+		adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT;
+		adc1 |= MC13783_ADC1_RAND;
 		break;
+
 	case MC13783_ADC_MODE_MULT_CHAN:
-		reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+		adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
+		adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
 		break;
+
 	default:
+		mc13783_unlock(mc13783);
 		return -EINVAL;
 	}
 
-	mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0);
-	mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1);
+	dev_dbg(&mc13783->spidev->dev, "%s: request irq\n", __func__);
+	mc13783_irq_request(mc13783, MC13783_IRQ_ADCDONE,
+			mc13783_handler_adcdone, __func__, &adcdone_data);
+	mc13783_ackirq(mc13783, MC13783_IRQ_ADCDONE);
 
-	wait_for_completion_interruptible(&mc13783->adc_done);
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_0, adc0);
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_1, adc1);
 
-	for (i = 0; i < 4; i++)
-		mc13783_reg_read(mc13783, MC13783_REG_ADC_2, &sample[i]);
+	mc13783_unlock(mc13783);
 
-	if (mc13783->ts_active)
-		mc13783_adc_set_ts_irq_mode(mc13783);
+	ret = wait_for_completion_interruptible_timeout(&adcdone_data.done, HZ);
 
-	mutex_unlock(&mc13783->adc_conv_lock);
+	if (!ret)
+		ret = -ETIMEDOUT;
 
-	return 0;
+	mc13783_lock(mc13783);
+
+	mc13783_irq_free(mc13783, MC13783_IRQ_ADCDONE, &adcdone_data);
+
+	if (ret > 0)
+		for (i = 0; i < 4; ++i) {
+			ret = mc13783_reg_read(mc13783,
+					MC13783_REG_ADC_2, &sample[i]);
+			if (ret)
+				break;
+		}
+
+	if (mode == MC13783_ADC_MODE_TS)
+		/* restore TSMOD */
+		mc13783_reg_write(mc13783, MC13783_REG_ADC_0, old_adc0);
+
+	mc13783->flags &= ~MC13783_ADC_WORKING;
+out:
+	mc13783_unlock(mc13783);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion);
 
-void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status)
+static int mc13783_add_subdevice_pdata(struct mc13783 *mc13783,
+		const char *name, void *pdata, size_t pdata_size)
 {
-	mc13783->ts_active = status;
+	struct mfd_cell cell = {
+		.name = name,
+		.platform_data = pdata,
+		.data_size = pdata_size,
+	};
+
+	return mfd_add_devices(&mc13783->spidev->dev, -1, &cell, 1, NULL, 0);
+}
+
+static int mc13783_add_subdevice(struct mc13783 *mc13783, const char *name)
+{
+	return mc13783_add_subdevice_pdata(mc13783, name, NULL, 0);
 }
-EXPORT_SYMBOL_GPL(mc13783_adc_set_ts_status);
 
 static int mc13783_check_revision(struct mc13783 *mc13783)
 {
 	u32 rev_id, rev1, rev2, finid, icid;
 
-	mc13783_read(mc13783, MC13783_REG_REVISION, &rev_id);
+	mc13783_reg_read(mc13783, MC13783_REG_REVISION, &rev_id);
 
 	rev1 = (rev_id & 0x018) >> 3;
 	rev2 = (rev_id & 0x007);
@@ -292,38 +555,24 @@ static int mc13783_check_revision(struct mc13783 *mc13783)
 		rev1 = 3;
 
 	if (rev1 == 0 || icid != 2) {
-		dev_err(mc13783->dev, "No MC13783 detected.\n");
+		dev_err(&mc13783->spidev->dev, "No MC13783 detected.\n");
 		return -ENODEV;
 	}
 
-	mc13783->revision = ((rev1 * 10) + rev2);
-	dev_info(mc13783->dev, "MC13783 Rev %d.%d FinVer %x detected\n", rev1,
-	       rev2, finid);
+	dev_info(&mc13783->spidev->dev,
+			"MC13783 Rev %d.%d FinVer %x detected\n",
+			rev1, rev2, finid);
 
 	return 0;
 }
 
-/*
- * Register a client device.  This is non-fatal since there is no need to
- * fail the entire device init due to a single platform device failing.
- */
-static void mc13783_client_dev_register(struct mc13783 *mc13783,
-				       const char *name)
-{
-	struct mfd_cell cell = {};
-
-	cell.name = name;
-
-	mfd_add_devices(mc13783->dev, -1, &cell, 1, NULL, 0);
-}
-
-static int __devinit mc13783_probe(struct spi_device *spi)
+static int mc13783_probe(struct spi_device *spi)
 {
 	struct mc13783 *mc13783;
-	struct mc13783_platform_data *pdata = spi->dev.platform_data;
+	struct mc13783_platform_data *pdata = dev_get_platdata(&spi->dev);
 	int ret;
 
-	mc13783 = kzalloc(sizeof(struct mc13783), GFP_KERNEL);
+	mc13783 = kzalloc(sizeof(*mc13783), GFP_KERNEL);
 	if (!mc13783)
 		return -ENOMEM;
 
@@ -332,96 +581,104 @@ static int __devinit mc13783_probe(struct spi_device *spi)
 	spi->bits_per_word = 32;
 	spi_setup(spi);
 
-	mc13783->spi_device = spi;
-	mc13783->dev = &spi->dev;
-	mc13783->irq = spi->irq;
+	mc13783->spidev = spi;
+
+	mutex_init(&mc13783->lock);
+	mc13783_lock(mc13783);
+
+	ret = mc13783_check_revision(mc13783);
+	if (ret)
+		goto err_revision;
+
+	/* mask all irqs */
+	ret = mc13783_reg_write(mc13783, MC13783_IRQMASK0, 0x00ffffff);
+	if (ret)
+		goto err_mask;
 
-	INIT_WORK(&mc13783->work, mc13783_irq_work);
-	mutex_init(&mc13783->io_lock);
-	mutex_init(&mc13783->adc_conv_lock);
-	init_completion(&mc13783->adc_done);
+	ret = mc13783_reg_write(mc13783, MC13783_IRQMASK1, 0x00ffffff);
+	if (ret)
+		goto err_mask;
+
+	ret = request_threaded_irq(spi->irq, NULL, mc13783_irq_thread,
+			IRQF_ONESHOT | IRQF_TRIGGER_HIGH, "mc13783", mc13783);
+
+	if (ret) {
+err_mask:
+err_revision:
+		mutex_unlock(&mc13783->lock);
+		dev_set_drvdata(&spi->dev, NULL);
+		kfree(mc13783);
+		return ret;
+	}
 
+	/* This should go away (BEGIN) */
 	if (pdata) {
 		mc13783->flags = pdata->flags;
 		mc13783->regulators = pdata->regulators;
 		mc13783->num_regulators = pdata->num_regulators;
 	}
+	/* This should go away (END) */
 
-	if (mc13783_check_revision(mc13783)) {
-		ret = -ENODEV;
-		goto err_out;
+	if (pdata->flags & MC13783_USE_ADC)
+		mc13783_add_subdevice(mc13783, "mc13783-adc");
+
+	if (pdata->flags & MC13783_USE_CODEC)
+		mc13783_add_subdevice(mc13783, "mc13783-codec");
+
+	if (pdata->flags & MC13783_USE_REGULATOR) {
+		struct mc13783_regulator_platform_data regulator_pdata = {
+			.num_regulators = pdata->num_regulators,
+			.regulators = pdata->regulators,
+		};
+
+		mc13783_add_subdevice_pdata(mc13783, "mc13783-regulator",
+				&regulator_pdata, sizeof(regulator_pdata));
 	}
 
-	/* clear and mask all interrupts */
-	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0, 0x00ffffff);
-	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_0, 0x00ffffff);
-	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_1, 0x00ffffff);
-	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_1, 0x00ffffff);
+	if (pdata->flags & MC13783_USE_RTC)
+		mc13783_add_subdevice(mc13783, "mc13783-rtc");
 
-	/* unmask adcdone interrupts */
-	mc13783_set_bits(mc13783, MC13783_REG_INTERRUPT_MASK_0,
-			MC13783_INT_MASK_ADCDONEM, 0);
+	if (pdata->flags & MC13783_USE_TOUCHSCREEN)
+		mc13783_add_subdevice(mc13783, "mc13783-ts");
 
-	ret = request_irq(mc13783->irq, mc13783_interrupt,
-			IRQF_DISABLED | IRQF_TRIGGER_HIGH, "mc13783",
-			mc13783);
-	if (ret)
-		goto err_out;
-
-	if (mc13783->flags & MC13783_USE_CODEC)
-		mc13783_client_dev_register(mc13783, "mc13783-codec");
-	if (mc13783->flags & MC13783_USE_ADC)
-		mc13783_client_dev_register(mc13783, "mc13783-adc");
-	if (mc13783->flags & MC13783_USE_RTC)
-		mc13783_client_dev_register(mc13783, "mc13783-rtc");
-	if (mc13783->flags & MC13783_USE_REGULATOR)
-		mc13783_client_dev_register(mc13783, "mc13783-regulator");
-	if (mc13783->flags & MC13783_USE_TOUCHSCREEN)
-		mc13783_client_dev_register(mc13783, "mc13783-ts");
+	mc13783_unlock(mc13783);
 
 	return 0;
-
-err_out:
-	kfree(mc13783);
-	return ret;
 }
 
 static int __devexit mc13783_remove(struct spi_device *spi)
 {
-	struct mc13783 *mc13783;
+	struct mc13783 *mc13783 = dev_get_drvdata(&spi->dev);
 
-	mc13783 = dev_get_drvdata(&spi->dev);
-
-	free_irq(mc13783->irq, mc13783);
+	free_irq(mc13783->spidev->irq, mc13783);
 
 	mfd_remove_devices(&spi->dev);
 
 	return 0;
 }
 
-static struct spi_driver pmic_driver = {
+static struct spi_driver mc13783_driver = {
 	.driver = {
-		   .name = "mc13783",
-		   .bus = &spi_bus_type,
-		   .owner = THIS_MODULE,
+		.name = "mc13783",
+		.bus = &spi_bus_type,
+		.owner = THIS_MODULE,
 	},
 	.probe = mc13783_probe,
 	.remove = __devexit_p(mc13783_remove),
 };
 
-static int __init pmic_init(void)
+static int __init mc13783_init(void)
 {
-	return spi_register_driver(&pmic_driver);
+	return spi_register_driver(&mc13783_driver);
 }
-subsys_initcall(pmic_init);
+subsys_initcall(mc13783_init);
 
-static void __exit pmic_exit(void)
+static void __exit mc13783_exit(void)
 {
-	spi_unregister_driver(&pmic_driver);
+	spi_unregister_driver(&mc13783_driver);
 }
-module_exit(pmic_exit);
-
-MODULE_DESCRIPTION("Core/Protocol driver for Freescale MC13783 PMIC");
-MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-MODULE_LICENSE("GPL");
+module_exit(mc13783_exit);
 
+MODULE_DESCRIPTION("Core driver for Freescale MC13783 PMIC");
+MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index 3d31e97d6a45..6d2e8466df1d 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -209,17 +209,16 @@ static void pcf50633_adc_irq(int irq, void *data)
 
 static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
 {
-	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
 	struct pcf50633_adc *adc;
 
 	adc = kzalloc(sizeof(*adc), GFP_KERNEL);
 	if (!adc)
 		return -ENOMEM;
 
-	adc->pcf = pdata->pcf;
+	adc->pcf = dev_to_pcf50633(pdev->dev.parent);
 	platform_set_drvdata(pdev, adc);
 
-	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ADCRDY,
+	pcf50633_register_irq(adc->pcf, PCF50633_IRQ_ADCRDY,
 					pcf50633_adc_irq, adc);
 
 	mutex_init(&adc->queue_mutex);
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index d26d7747175e..03dcc9200707 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -290,7 +290,7 @@ out:
 
 int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
 {
-	dev_info(pcf->dev, "Masking IRQ %d\n", irq);
+	dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
 
 	return __pcf50633_irq_mask_set(pcf, irq, 1);
 }
@@ -298,7 +298,7 @@ EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
 
 int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
 {
-	dev_info(pcf->dev, "Unmasking IRQ %d\n", irq);
+	dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
 
 	return __pcf50633_irq_mask_set(pcf, irq, 0);
 }
@@ -345,6 +345,9 @@ static void pcf50633_irq_worker(struct work_struct *work)
 		goto out;
 	}
 
+	/* defeat 8s death from lowsys on A5 */
+	pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN,  0x04);
+
 	/* We immediately read the usb and adapter status. We thus make sure
 	 * only of USBINS/USBREM IRQ handlers are called */
 	if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
@@ -453,7 +456,6 @@ static void
 pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 						struct platform_device **pdev)
 {
-	struct pcf50633_subdev_pdata *subdev_pdata;
 	int ret;
 
 	*pdev = platform_device_alloc(name, -1);
@@ -462,15 +464,6 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 		return;
 	}
 
-	subdev_pdata = kmalloc(sizeof(*subdev_pdata), GFP_KERNEL);
-	if (!subdev_pdata) {
-		dev_err(pcf->dev, "Error allocating subdev pdata\n");
-		platform_device_put(*pdev);
-	}
-
-	subdev_pdata->pcf = pcf;
-	platform_device_add_data(*pdev, subdev_pdata, sizeof(*subdev_pdata));
-
 	(*pdev)->dev.parent = pcf->dev;
 
 	ret = platform_device_add(*pdev);
@@ -482,13 +475,13 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 }
 
 #ifdef CONFIG_PM
-static int pcf50633_suspend(struct device *dev, pm_message_t state)
+static int pcf50633_suspend(struct i2c_client *client, pm_message_t state)
 {
 	struct pcf50633 *pcf;
 	int ret = 0, i;
 	u8 res[5];
 
-	pcf = dev_get_drvdata(dev);
+	pcf = i2c_get_clientdata(client);
 
 	/* Make sure our interrupt handlers are not called
 	 * henceforth */
@@ -523,12 +516,12 @@ out:
 	return ret;
 }
 
-static int pcf50633_resume(struct device *dev)
+static int pcf50633_resume(struct i2c_client *client)
 {
 	struct pcf50633 *pcf;
 	int ret;
 
-	pcf = dev_get_drvdata(dev);
+	pcf = i2c_get_clientdata(client);
 
 	/* Write the saved mask registers */
 	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
@@ -560,9 +553,14 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 {
 	struct pcf50633 *pcf;
 	struct pcf50633_platform_data *pdata = client->dev.platform_data;
-	int i, ret = 0;
+	int i, ret;
 	int version, variant;
 
+	if (!client->irq) {
+		dev_err(&client->dev, "Missing IRQ\n");
+		return -ENOENT;
+	}
+
 	pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
 	if (!pcf)
 		return -ENOMEM;
@@ -577,6 +575,12 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	pcf->irq = client->irq;
 	pcf->work_queue = create_singlethread_workqueue("pcf50633");
 
+	if (!pcf->work_queue) {
+		dev_err(&client->dev, "Failed to alloc workqueue\n");
+		ret = -ENOMEM;
+		goto err_free;
+	}
+
 	INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
 
 	version = pcf50633_reg_read(pcf, 0);
@@ -584,7 +588,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	if (version < 0 || variant < 0) {
 		dev_err(pcf->dev, "Unable to probe pcf50633\n");
 		ret = -ENODEV;
-		goto err;
+		goto err_destroy_workqueue;
 	}
 
 	dev_info(pcf->dev, "Probed device version %d variant %d\n",
@@ -598,6 +602,14 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
 	pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
 
+	ret = request_irq(client->irq, pcf50633_irq,
+					IRQF_TRIGGER_LOW, "pcf50633", pcf);
+
+	if (ret) {
+		dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
+		goto err_destroy_workqueue;
+	}
+
 	/* Create sub devices */
 	pcf50633_client_dev_register(pcf, "pcf50633-input",
 						&pcf->input_pdev);
@@ -613,31 +625,18 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 
 		pdev = platform_device_alloc("pcf50633-regltr", i);
 		if (!pdev) {
-			dev_err(pcf->dev, "Cannot create regulator\n");
+			dev_err(pcf->dev, "Cannot create regulator %d\n", i);
 			continue;
 		}
 
 		pdev->dev.parent = pcf->dev;
-		pdev->dev.platform_data = &pdata->reg_init_data[i];
-		dev_set_drvdata(&pdev->dev, pcf);
+		platform_device_add_data(pdev, &pdata->reg_init_data[i],
+					sizeof(pdata->reg_init_data[i]));
 		pcf->regulator_pdev[i] = pdev;
 
 		platform_device_add(pdev);
 	}
 
-	if (client->irq) {
-		ret = request_irq(client->irq, pcf50633_irq,
-				IRQF_TRIGGER_LOW, "pcf50633", pcf);
-
-		if (ret) {
-			dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
-			goto err;
-		}
-	} else {
-		dev_err(pcf->dev, "No IRQ configured\n");
-		goto err;
-	}
-
 	if (enable_irq_wake(client->irq) < 0)
 		dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
 			"in this hardware revision", client->irq);
@@ -651,9 +650,12 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 
 	return 0;
 
-err:
+err_destroy_workqueue:
 	destroy_workqueue(pcf->work_queue);
+err_free:
+	i2c_set_clientdata(client, NULL);
 	kfree(pcf);
+
 	return ret;
 }
 
@@ -686,12 +688,12 @@ static struct i2c_device_id pcf50633_id_table[] = {
 static struct i2c_driver pcf50633_driver = {
 	.driver = {
 		.name	= "pcf50633",
-		.suspend = pcf50633_suspend,
-		.resume	= pcf50633_resume,
 	},
 	.id_table = pcf50633_id_table,
 	.probe = pcf50633_probe,
 	.remove = __devexit_p(pcf50633_remove),
+	.suspend = pcf50633_suspend,
+	.resume	= pcf50633_resume,
 };
 
 static int __init pcf50633_init(void)
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index acf8b9d5f575..e5955306c2fa 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -637,7 +637,7 @@ static int tps65010_probe(struct i2c_client *client,
 				tps, DEBUG_FOPS);
 
 	/* optionally register GPIOs */
-	if (board && board->base > 0) {
+	if (board && board->base != 0) {
 		tps->outmask = board->outmask;
 
 		tps->chip.label = client->name;
@@ -964,6 +964,34 @@ int tps65010_config_vregs1(unsigned value)
 }
 EXPORT_SYMBOL(tps65010_config_vregs1);
 
+int tps65010_config_vdcdc2(unsigned value)
+{
+	struct i2c_client *c;
+	int	 status;
+
+	if (!the_tps)
+		return -ENODEV;
+
+	c = the_tps->client;
+	mutex_lock(&the_tps->lock);
+
+	pr_debug("%s: vdcdc2 0x%02x\n", DRIVER_NAME,
+		 i2c_smbus_read_byte_data(c, TPS_VDCDC2));
+
+	status = i2c_smbus_write_byte_data(c, TPS_VDCDC2, value);
+
+	if (status != 0)
+		printk(KERN_ERR "%s: Failed to write vdcdc2 register\n",
+			DRIVER_NAME);
+	else
+		pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+			 i2c_smbus_read_byte_data(c, TPS_VDCDC2));
+
+	mutex_unlock(&the_tps->lock);
+	return status;
+}
+EXPORT_SYMBOL(tps65010_config_vdcdc2);
+
 /*-------------------------------------------------------------------------*/
 /* tps65013_set_low_pwr parameter:
  * mode: ON or OFF
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl-core.c
index 40449cdf09db..2a7606534196 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1,5 +1,6 @@
 /*
- * twl4030_core.c - driver for TWL4030/TPS659x0 PM and audio CODEC devices
+ * twl_core.c - driver for TWL4030/TWL5030/TWL60X0/TPS659x0 PM
+ * and audio CODEC devices
  *
  * Copyright (C) 2005-2006 Texas Instruments, Inc.
  *
@@ -36,7 +37,7 @@
 #include <linux/regulator/machine.h>
 
 #include <linux/i2c.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #include <plat/cpu.h>
@@ -55,7 +56,7 @@
  * (and associated registers).
  */
 
-#define DRIVER_NAME			"twl4030"
+#define DRIVER_NAME			"twl"
 
 #if defined(CONFIG_TWL4030_BCI_BATTERY) || \
 	defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
@@ -125,7 +126,7 @@
 /* Last - for index max*/
 #define TWL4030_MODULE_LAST		TWL4030_MODULE_SECURED_REG
 
-#define TWL4030_NUM_SLAVES		4
+#define TWL_NUM_SLAVES		4
 
 #if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \
 	|| defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE)
@@ -134,6 +135,13 @@
 #define twl_has_pwrbutton()	false
 #endif
 
+#define SUB_CHIP_ID0 0
+#define SUB_CHIP_ID1 1
+#define SUB_CHIP_ID2 2
+#define SUB_CHIP_ID3 3
+
+#define TWL_MODULE_LAST TWL4030_MODULE_LAST
+
 /* Base Address defns for twl4030_map[] */
 
 /* subchip/slave 0 - USB ID */
@@ -158,6 +166,10 @@
 #define TWL4030_BASEADD_PWMB		0x00F1
 #define TWL4030_BASEADD_KEYPAD		0x00D2
 
+#define TWL5031_BASEADD_ACCESSORY	0x0074 /* Replaces Main Charge */
+#define TWL5031_BASEADD_INTERRUPTS	0x00B9 /* Different than TWL4030's
+						  one */
+
 /* subchip/slave 3 - POWER ID */
 #define TWL4030_BASEADD_BACKUP		0x0014
 #define TWL4030_BASEADD_INT		0x002E
@@ -169,6 +181,30 @@
 /* Triton Core internal information (END) */
 
 
+/* subchip/slave 0 0x48 - POWER */
+#define TWL6030_BASEADD_RTC		0x0000
+#define TWL6030_BASEADD_MEM		0x0017
+#define TWL6030_BASEADD_PM_MASTER	0x001F
+#define TWL6030_BASEADD_PM_SLAVE_MISC	0x0030 /* PM_RECEIVER */
+#define TWL6030_BASEADD_PM_MISC		0x00E2
+#define TWL6030_BASEADD_PM_PUPD		0x00F0
+
+/* subchip/slave 1 0x49 - FEATURE */
+#define TWL6030_BASEADD_USB		0x0000
+#define TWL6030_BASEADD_GPADC_CTRL	0x002E
+#define TWL6030_BASEADD_AUX		0x0090
+#define TWL6030_BASEADD_PWM		0x00BA
+#define TWL6030_BASEADD_GASGAUGE	0x00C0
+#define TWL6030_BASEADD_PIH		0x00D0
+#define TWL6030_BASEADD_CHARGER		0x00E0
+
+/* subchip/slave 2 0x4A - DFT */
+#define TWL6030_BASEADD_DIEID		0x00C0
+
+/* subchip/slave 3 0x4B - AUDIO */
+#define TWL6030_BASEADD_AUDIO		0x0000
+#define TWL6030_BASEADD_RSV		0x0000
+
 /* Few power values */
 #define R_CFG_BOOT			0x05
 #define R_PROTECT_KEY			0x0E
@@ -183,19 +219,29 @@
 #define HFCLK_FREQ_26_MHZ		(2 << 0)
 #define HFCLK_FREQ_38p4_MHZ		(3 << 0)
 #define HIGH_PERF_SQ			(1 << 3)
+#define CK32K_LOWPWR_EN			(1 << 7)
 
 
 /* chip-specific feature flags, for i2c_device_id.driver_data */
 #define TWL4030_VAUX2		BIT(0)	/* pre-5030 voltage ranges */
 #define TPS_SUBSET		BIT(1)	/* tps659[23]0 have fewer LDOs */
+#define TWL5031			BIT(2)  /* twl5031 has different registers */
+#define TWL6030_CLASS		BIT(3)	/* TWL6030 class */
 
 /*----------------------------------------------------------------------*/
 
 /* is driver active, bound to a chip? */
 static bool inuse;
 
-/* Structure for each TWL4030 Slave */
-struct twl4030_client {
+static unsigned int twl_id;
+unsigned int twl_rev(void)
+{
+	return twl_id;
+}
+EXPORT_SYMBOL(twl_rev);
+
+/* Structure for each TWL4030/TWL6030 Slave */
+struct twl_client {
 	struct i2c_client *client;
 	u8 address;
 
@@ -206,19 +252,20 @@ struct twl4030_client {
 	struct mutex xfer_lock;
 };
 
-static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES];
+static struct twl_client twl_modules[TWL_NUM_SLAVES];
 
 
 /* mapping the module id to slave id and base address */
-struct twl4030mapping {
+struct twl_mapping {
 	unsigned char sid;	/* Slave ID */
 	unsigned char base;	/* base address */
 };
+struct twl_mapping *twl_map;
 
-static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
+static struct twl_mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
 	/*
 	 * NOTE:  don't change this table without updating the
-	 * <linux/i2c/twl4030.h> defines for TWL4030_MODULE_*
+	 * <linux/i2c/twl.h> defines for TWL4030_MODULE_*
 	 * so they continue to match the order in this table.
 	 */
 
@@ -240,6 +287,8 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
 	{ 2, TWL4030_BASEADD_PWM1 },
 	{ 2, TWL4030_BASEADD_PWMA },
 	{ 2, TWL4030_BASEADD_PWMB },
+	{ 2, TWL5031_BASEADD_ACCESSORY },
+	{ 2, TWL5031_BASEADD_INTERRUPTS },
 
 	{ 3, TWL4030_BASEADD_BACKUP },
 	{ 3, TWL4030_BASEADD_INT },
@@ -249,12 +298,46 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
 	{ 3, TWL4030_BASEADD_SECURED_REG },
 };
 
+static struct twl_mapping twl6030_map[] = {
+	/*
+	 * NOTE:  don't change this table without updating the
+	 * <linux/i2c/twl.h> defines for TWL4030_MODULE_*
+	 * so they continue to match the order in this table.
+	 */
+	{ SUB_CHIP_ID1, TWL6030_BASEADD_USB },
+	{ SUB_CHIP_ID3, TWL6030_BASEADD_AUDIO },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_DIEID },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+	{ SUB_CHIP_ID1, TWL6030_BASEADD_PIH },
+
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+	{ SUB_CHIP_ID1, TWL6030_BASEADD_GPADC_CTRL },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+
+	{ SUB_CHIP_ID1, TWL6030_BASEADD_CHARGER },
+	{ SUB_CHIP_ID1, TWL6030_BASEADD_GASGAUGE },
+	{ SUB_CHIP_ID1, TWL6030_BASEADD_PWM },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+	{ SUB_CHIP_ID0, TWL6030_BASEADD_PM_MASTER },
+	{ SUB_CHIP_ID0, TWL6030_BASEADD_PM_SLAVE_MISC },
+
+	{ SUB_CHIP_ID0, TWL6030_BASEADD_RTC },
+	{ SUB_CHIP_ID0, TWL6030_BASEADD_MEM },
+};
+
 /*----------------------------------------------------------------------*/
 
 /* Exported Functions */
 
 /**
- * twl4030_i2c_write - Writes a n bit register in TWL4030
+ * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0
  * @mod_no: module number
  * @value: an array of num_bytes+1 containing data to write
  * @reg: register address (just offset will do)
@@ -265,19 +348,19 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
  *
  * Returns the result of operation - 0 is success
  */
-int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
+int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
 	int ret;
 	int sid;
-	struct twl4030_client *twl;
+	struct twl_client *twl;
 	struct i2c_msg *msg;
 
-	if (unlikely(mod_no > TWL4030_MODULE_LAST)) {
+	if (unlikely(mod_no > TWL_MODULE_LAST)) {
 		pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
 		return -EPERM;
 	}
-	sid = twl4030_map[mod_no].sid;
-	twl = &twl4030_modules[sid];
+	sid = twl_map[mod_no].sid;
+	twl = &twl_modules[sid];
 
 	if (unlikely(!inuse)) {
 		pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
@@ -294,19 +377,26 @@ int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 	msg->flags = 0;
 	msg->buf = value;
 	/* over write the first byte of buffer with the register address */
-	*value = twl4030_map[mod_no].base + reg;
+	*value = twl_map[mod_no].base + reg;
 	ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1);
 	mutex_unlock(&twl->xfer_lock);
 
-	/* i2cTransfer returns num messages.translate it pls.. */
-	if (ret >= 0)
-		ret = 0;
-	return ret;
+	/* i2c_transfer returns number of messages transferred */
+	if (ret != 1) {
+		pr_err("%s: i2c_write failed to transfer all messages\n",
+			DRIVER_NAME);
+		if (ret < 0)
+			return ret;
+		else
+			return -EIO;
+	} else {
+		return 0;
+	}
 }
-EXPORT_SYMBOL(twl4030_i2c_write);
+EXPORT_SYMBOL(twl_i2c_write);
 
 /**
- * twl4030_i2c_read - Reads a n bit register in TWL4030
+ * twl_i2c_read - Reads a n bit register in TWL4030/TWL5030/TWL60X0
  * @mod_no: module number
  * @value: an array of num_bytes containing data to be read
  * @reg: register address (just offset will do)
@@ -314,20 +404,20 @@ EXPORT_SYMBOL(twl4030_i2c_write);
  *
  * Returns result of operation - num_bytes is success else failure.
  */
-int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
+int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
 	int ret;
 	u8 val;
 	int sid;
-	struct twl4030_client *twl;
+	struct twl_client *twl;
 	struct i2c_msg *msg;
 
-	if (unlikely(mod_no > TWL4030_MODULE_LAST)) {
+	if (unlikely(mod_no > TWL_MODULE_LAST)) {
 		pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
 		return -EPERM;
 	}
-	sid = twl4030_map[mod_no].sid;
-	twl = &twl4030_modules[sid];
+	sid = twl_map[mod_no].sid;
+	twl = &twl_modules[sid];
 
 	if (unlikely(!inuse)) {
 		pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
@@ -339,7 +429,7 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 	msg->addr = twl->address;
 	msg->len = 1;
 	msg->flags = 0;	/* Read the register value */
-	val = twl4030_map[mod_no].base + reg;
+	val = twl_map[mod_no].base + reg;
 	msg->buf = &val;
 	/* [MSG2] fill the data rx buffer */
 	msg = &twl->xfer_msg[1];
@@ -350,45 +440,52 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 	ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 2);
 	mutex_unlock(&twl->xfer_lock);
 
-	/* i2cTransfer returns num messages.translate it pls.. */
-	if (ret >= 0)
-		ret = 0;
-	return ret;
+	/* i2c_transfer returns number of messages transferred */
+	if (ret != 2) {
+		pr_err("%s: i2c_read failed to transfer all messages\n",
+			DRIVER_NAME);
+		if (ret < 0)
+			return ret;
+		else
+			return -EIO;
+	} else {
+		return 0;
+	}
 }
-EXPORT_SYMBOL(twl4030_i2c_read);
+EXPORT_SYMBOL(twl_i2c_read);
 
 /**
- * twl4030_i2c_write_u8 - Writes a 8 bit register in TWL4030
+ * twl_i2c_write_u8 - Writes a 8 bit register in TWL4030/TWL5030/TWL60X0
  * @mod_no: module number
  * @value: the value to be written 8 bit
  * @reg: register address (just offset will do)
  *
  * Returns result of operation - 0 is success
  */
-int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg)
+int twl_i2c_write_u8(u8 mod_no, u8 value, u8 reg)
 {
 
 	/* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */
 	u8 temp_buffer[2] = { 0 };
 	/* offset 1 contains the data */
 	temp_buffer[1] = value;
-	return twl4030_i2c_write(mod_no, temp_buffer, reg, 1);
+	return twl_i2c_write(mod_no, temp_buffer, reg, 1);
 }
-EXPORT_SYMBOL(twl4030_i2c_write_u8);
+EXPORT_SYMBOL(twl_i2c_write_u8);
 
 /**
- * twl4030_i2c_read_u8 - Reads a 8 bit register from TWL4030
+ * twl_i2c_read_u8 - Reads a 8 bit register from TWL4030/TWL5030/TWL60X0
  * @mod_no: module number
  * @value: the value read 8 bit
  * @reg: register address (just offset will do)
  *
  * Returns result of operation - 0 is success
  */
-int twl4030_i2c_read_u8(u8 mod_no, u8 *value, u8 reg)
+int twl_i2c_read_u8(u8 mod_no, u8 *value, u8 reg)
 {
-	return twl4030_i2c_read(mod_no, value, reg, 1);
+	return twl_i2c_read(mod_no, value, reg, 1);
 }
-EXPORT_SYMBOL(twl4030_i2c_read_u8);
+EXPORT_SYMBOL(twl_i2c_read_u8);
 
 /*----------------------------------------------------------------------*/
 
@@ -398,7 +495,7 @@ add_numbered_child(unsigned chip, const char *name, int num,
 		bool can_wakeup, int irq0, int irq1)
 {
 	struct platform_device	*pdev;
-	struct twl4030_client	*twl = &twl4030_modules[chip];
+	struct twl_client	*twl = &twl_modules[chip];
 	int			status;
 
 	pdev = platform_device_alloc(name, num);
@@ -456,6 +553,7 @@ add_regulator_linked(int num, struct regulator_init_data *pdata,
 		struct regulator_consumer_supply *consumers,
 		unsigned num_consumers)
 {
+	unsigned sub_chip_id;
 	/* regulator framework demands init_data ... */
 	if (!pdata)
 		return NULL;
@@ -466,7 +564,8 @@ add_regulator_linked(int num, struct regulator_init_data *pdata,
 	}
 
 	/* NOTE:  we currently ignore regulator IRQs, e.g. for short circuits */
-	return add_numbered_child(3, "twl4030_reg", num,
+	sub_chip_id = twl_map[TWL_MODULE_PM_MASTER].sid;
+	return add_numbered_child(sub_chip_id, "twl_reg", num,
 		pdata, sizeof(*pdata), false, 0, 0);
 }
 
@@ -486,29 +585,32 @@ static int
 add_children(struct twl4030_platform_data *pdata, unsigned long features)
 {
 	struct device	*child;
+	unsigned sub_chip_id;
 
-	if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
+	if (twl_has_bci() && pdata->bci &&
+	    !(features & (TPS_SUBSET | TWL5031))) {
 		child = add_child(3, "twl4030_bci",
 				pdata->bci, sizeof(*pdata->bci),
 				false,
 				/* irq0 = CHG_PRES, irq1 = BCI */
-				pdata->irq_base + 8 + 1, pdata->irq_base + 2);
+				pdata->irq_base + BCI_PRES_INTR_OFFSET,
+				pdata->irq_base + BCI_INTR_OFFSET);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
 
 	if (twl_has_gpio() && pdata->gpio) {
-		child = add_child(1, "twl4030_gpio",
+		child = add_child(SUB_CHIP_ID1, "twl4030_gpio",
 				pdata->gpio, sizeof(*pdata->gpio),
-				false, pdata->irq_base + 0, 0);
+				false, pdata->irq_base + GPIO_INTR_OFFSET, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
 
 	if (twl_has_keypad() && pdata->keypad) {
-		child = add_child(2, "twl4030_keypad",
+		child = add_child(SUB_CHIP_ID2, "twl4030_keypad",
 				pdata->keypad, sizeof(*pdata->keypad),
-				true, pdata->irq_base + 1, 0);
+				true, pdata->irq_base + KEYPAD_INTR_OFFSET, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
@@ -516,7 +618,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 	if (twl_has_madc() && pdata->madc) {
 		child = add_child(2, "twl4030_madc",
 				pdata->madc, sizeof(*pdata->madc),
-				true, pdata->irq_base + 3, 0);
+				true, pdata->irq_base + MADC_INTR_OFFSET, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
@@ -529,14 +631,15 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 		 * Eventually, Linux might become more aware of such
 		 * HW security concerns, and "least privilege".
 		 */
-		child = add_child(3, "twl4030_rtc",
+		sub_chip_id = twl_map[TWL_MODULE_RTC].sid;
+		child = add_child(sub_chip_id, "twl_rtc",
 				NULL, 0,
-				true, pdata->irq_base + 8 + 3, 0);
+				true, pdata->irq_base + RTC_INTR_OFFSET, 0);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 	}
 
-	if (twl_has_usb() && pdata->usb) {
+	if (twl_has_usb() && pdata->usb && twl_class_is_4030()) {
 
 		static struct regulator_consumer_supply usb1v5 = {
 			.supply =	"usb1v5",
@@ -581,7 +684,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 				pdata->usb, sizeof(*pdata->usb),
 				true,
 				/* irq0 = USB_PRES, irq1 = USB */
-				pdata->irq_base + 8 + 2, pdata->irq_base + 4);
+				pdata->irq_base + USB_PRES_INTR_OFFSET,
+				pdata->irq_base + USB_INTR_OFFSET);
 
 		if (IS_ERR(child))
 			return PTR_ERR(child);
@@ -615,12 +719,23 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			return PTR_ERR(child);
 	}
 
-	if (twl_has_regulator()) {
-		/*
+	/* twl4030 regulators */
+	if (twl_has_regulator() && twl_class_is_4030()) {
 		child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
-		*/
+
+		child = add_regulator(TWL4030_REG_VIO, pdata->vio);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VDD1, pdata->vdd1);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VDD2, pdata->vdd2);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
 
 		child = add_regulator(TWL4030_REG_VMMC1, pdata->vmmc1);
 		if (IS_ERR(child))
@@ -636,10 +751,23 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 				pdata->vaux2);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VINTANA1, pdata->vintana1);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VINTANA2, pdata->vintana2);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL4030_REG_VINTDIG, pdata->vintdig);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
 	}
 
 	/* maybe add LDOs that are omitted on cost-reduced parts */
-	if (twl_has_regulator() && !(features & TPS_SUBSET)) {
+	if (twl_has_regulator() && !(features & TPS_SUBSET)
+	  && twl_class_is_4030()) {
 		child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
@@ -665,6 +793,49 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			return PTR_ERR(child);
 	}
 
+	/* twl6030 regulators */
+	if (twl_has_regulator() && twl_class_is_6030()) {
+		child = add_regulator(TWL6030_REG_VMMC, pdata->vmmc);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VPP, pdata->vpp);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VUSIM, pdata->vusim);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VANA, pdata->vana);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VCXIO, pdata->vcxio);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VDAC, pdata->vdac);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VUSB, pdata->vusb);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VAUX1_6030, pdata->vaux1);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VAUX2_6030, pdata->vaux2);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+
+		child = add_regulator(TWL6030_REG_VAUX3_6030, pdata->vaux3);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
 	return 0;
 }
 
@@ -679,7 +850,7 @@ static inline int __init protect_pm_master(void)
 {
 	int e = 0;
 
-	e = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_LOCK,
+	e = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, KEY_LOCK,
 			R_PROTECT_KEY);
 	return e;
 }
@@ -688,14 +859,15 @@ static inline int __init unprotect_pm_master(void)
 {
 	int e = 0;
 
-	e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK1,
+	e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, KEY_UNLOCK1,
 			R_PROTECT_KEY);
-	e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK2,
+	e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, KEY_UNLOCK2,
 			R_PROTECT_KEY);
 	return e;
 }
 
-static void clocks_init(struct device *dev)
+static void clocks_init(struct device *dev,
+			struct twl4030_clock_init_data *clock)
 {
 	int e = 0;
 	struct clk *osc;
@@ -709,7 +881,7 @@ static void clocks_init(struct device *dev)
 		osc = clk_get(dev, "osc_sys_ck");
 
 	if (IS_ERR(osc)) {
-		printk(KERN_WARNING "Skipping twl4030 internal clock init and "
+		printk(KERN_WARNING "Skipping twl internal clock init and "
 				"using bootloader value (unknown osc rate)\n");
 		return;
 	}
@@ -723,7 +895,7 @@ static void clocks_init(struct device *dev)
 	 */
 	osc = ERR_PTR(-EIO);
 
-	printk(KERN_WARNING "Skipping twl4030 internal clock init and "
+	printk(KERN_WARNING "Skipping twl internal clock init and "
 	       "using bootloader value (unknown osc rate)\n");
 
 	return;
@@ -742,9 +914,12 @@ static void clocks_init(struct device *dev)
 	}
 
 	ctrl |= HIGH_PERF_SQ;
+	if (clock && clock->ck32k_lowpwr_enable)
+		ctrl |= CK32K_LOWPWR_EN;
+
 	e |= unprotect_pm_master();
 	/* effect->MADC+USB ck en */
-	e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
+	e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
 	e |= protect_pm_master();
 
 	if (e < 0)
@@ -753,24 +928,31 @@ static void clocks_init(struct device *dev)
 
 /*----------------------------------------------------------------------*/
 
-int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
-int twl_exit_irq(void);
+int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
+int twl4030_exit_irq(void);
+int twl4030_init_chip_irq(const char *chip);
+int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
+int twl6030_exit_irq(void);
 
-static int twl4030_remove(struct i2c_client *client)
+static int twl_remove(struct i2c_client *client)
 {
 	unsigned i;
 	int status;
 
-	status = twl_exit_irq();
+	if (twl_class_is_4030())
+		status = twl4030_exit_irq();
+	else
+		status = twl6030_exit_irq();
+
 	if (status < 0)
 		return status;
 
-	for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
-		struct twl4030_client	*twl = &twl4030_modules[i];
+	for (i = 0; i < TWL_NUM_SLAVES; i++) {
+		struct twl_client	*twl = &twl_modules[i];
 
 		if (twl->client && twl->client != client)
 			i2c_unregister_device(twl->client);
-		twl4030_modules[i].client = NULL;
+		twl_modules[i].client = NULL;
 	}
 	inuse = false;
 	return 0;
@@ -778,7 +960,7 @@ static int twl4030_remove(struct i2c_client *client)
 
 /* NOTE:  this driver only handles a single twl4030/tps659x0 chip */
 static int __init
-twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
+twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	int				status;
 	unsigned			i;
@@ -799,8 +981,8 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return -EBUSY;
 	}
 
-	for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
-		struct twl4030_client	*twl = &twl4030_modules[i];
+	for (i = 0; i < TWL_NUM_SLAVES; i++) {
+		struct twl_client	*twl = &twl_modules[i];
 
 		twl->address = client->addr + i;
 		if (i == 0)
@@ -814,15 +996,20 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 				status = -ENOMEM;
 				goto fail;
 			}
-			strlcpy(twl->client->name, id->name,
-					sizeof(twl->client->name));
 		}
 		mutex_init(&twl->xfer_lock);
 	}
 	inuse = true;
+	if ((id->driver_data) & TWL6030_CLASS) {
+		twl_id = TWL6030_CLASS_ID;
+		twl_map = &twl6030_map[0];
+	} else {
+		twl_id = TWL4030_CLASS_ID;
+		twl_map = &twl4030_map[0];
+	}
 
 	/* setup clock framework */
-	clocks_init(&client->dev);
+	clocks_init(&client->dev, pdata->clock);
 
 	/* load power event scripts */
 	if (twl_has_power() && pdata->power)
@@ -832,7 +1019,15 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	if (client->irq
 			&& pdata->irq_base
 			&& pdata->irq_end > pdata->irq_base) {
-		status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
+		if (twl_class_is_4030()) {
+			twl4030_init_chip_irq(id->name);
+			status = twl4030_init_irq(client->irq, pdata->irq_base,
+			pdata->irq_end);
+		} else {
+			status = twl6030_init_irq(client->irq, pdata->irq_base,
+			pdata->irq_end);
+		}
+
 		if (status < 0)
 			goto fail;
 	}
@@ -840,40 +1035,42 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	status = add_children(pdata, id->driver_data);
 fail:
 	if (status < 0)
-		twl4030_remove(client);
+		twl_remove(client);
 	return status;
 }
 
-static const struct i2c_device_id twl4030_ids[] = {
+static const struct i2c_device_id twl_ids[] = {
 	{ "twl4030", TWL4030_VAUX2 },	/* "Triton 2" */
 	{ "twl5030", 0 },		/* T2 updated */
+	{ "twl5031", TWL5031 },		/* TWL5030 updated */
 	{ "tps65950", 0 },		/* catalog version of twl5030 */
 	{ "tps65930", TPS_SUBSET },	/* fewer LDOs and DACs; no charger */
 	{ "tps65920", TPS_SUBSET },	/* fewer LDOs; no codec or charger */
+	{ "twl6030", TWL6030_CLASS },	/* "Phoenix power chip" */
 	{ /* end of list */ },
 };
-MODULE_DEVICE_TABLE(i2c, twl4030_ids);
+MODULE_DEVICE_TABLE(i2c, twl_ids);
 
 /* One Client Driver , 4 Clients */
-static struct i2c_driver twl4030_driver = {
+static struct i2c_driver twl_driver = {
 	.driver.name	= DRIVER_NAME,
-	.id_table	= twl4030_ids,
-	.probe		= twl4030_probe,
-	.remove		= twl4030_remove,
+	.id_table	= twl_ids,
+	.probe		= twl_probe,
+	.remove		= twl_remove,
 };
 
-static int __init twl4030_init(void)
+static int __init twl_init(void)
 {
-	return i2c_add_driver(&twl4030_driver);
+	return i2c_add_driver(&twl_driver);
 }
-subsys_initcall(twl4030_init);
+subsys_initcall(twl_init);
 
-static void __exit twl4030_exit(void)
+static void __exit twl_exit(void)
 {
-	i2c_del_driver(&twl4030_driver);
+	i2c_del_driver(&twl_driver);
 }
-module_exit(twl4030_exit);
+module_exit(twl_exit);
 
 MODULE_AUTHOR("Texas Instruments, Inc.");
-MODULE_DESCRIPTION("I2C Core interface for TWL4030");
+MODULE_DESCRIPTION("I2C Core interface for TWL");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index fb194fe244c1..20d29bafc9f5 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -32,7 +32,7 @@
 #include <linux/irq.h>
 #include <linux/kthread.h>
 
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*
@@ -74,6 +74,8 @@ struct sih {
 	u8	edr_offset;
 	u8	bytes_edr;		/* bytelen of EDR */
 
+	u8	irq_lines;		/* number of supported irq lines */
+
 	/* SIR ignored -- set interrupt, for testing only */
 	struct irq_data {
 		u8	isr_offset;
@@ -82,6 +84,9 @@ struct sih {
 	/* + 2 bytes padding */
 };
 
+static const struct sih *sih_modules;
+static int nr_sih_modules;
+
 #define SIH_INITIALIZER(modname, nbits) \
 	.module		= TWL4030_MODULE_ ## modname, \
 	.control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
@@ -89,6 +94,7 @@ struct sih {
 	.bytes_ixr	= DIV_ROUND_UP(nbits, 8), \
 	.edr_offset	= TWL4030_ ## modname ## _EDR, \
 	.bytes_edr	= DIV_ROUND_UP((2*(nbits)), 8), \
+	.irq_lines	= 2, \
 	.mask = { { \
 		.isr_offset	= TWL4030_ ## modname ## _ISR1, \
 		.imr_offset	= TWL4030_ ## modname ## _IMR1, \
@@ -107,7 +113,8 @@ struct sih {
 /* Order in this table matches order in PIH_ISR.  That is,
  * BIT(n) in PIH_ISR is sih_modules[n].
  */
-static const struct sih sih_modules[6] = {
+/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
+static const struct sih sih_modules_twl4030[6] = {
 	[0] = {
 		.name		= "gpio",
 		.module		= TWL4030_MODULE_GPIO,
@@ -118,6 +125,7 @@ static const struct sih sih_modules[6] = {
 		/* Note: *all* of these IRQs default to no-trigger */
 		.edr_offset	= REG_GPIO_EDR1,
 		.bytes_edr	= 5,
+		.irq_lines	= 2,
 		.mask = { {
 			.isr_offset	= REG_GPIO_ISR1A,
 			.imr_offset	= REG_GPIO_IMR1A,
@@ -140,6 +148,7 @@ static const struct sih sih_modules[6] = {
 		.edr_offset	= TWL4030_INTERRUPTS_BCIEDR1,
 		/* Note: most of these IRQs default to no-trigger */
 		.bytes_edr	= 3,
+		.irq_lines	= 2,
 		.mask = { {
 			.isr_offset	= TWL4030_INTERRUPTS_BCIISR1A,
 			.imr_offset	= TWL4030_INTERRUPTS_BCIIMR1A,
@@ -164,6 +173,99 @@ static const struct sih sih_modules[6] = {
 		/* there are no SIH modules #6 or #7 ... */
 };
 
+static const struct sih sih_modules_twl5031[8] = {
+	[0] = {
+		.name		= "gpio",
+		.module		= TWL4030_MODULE_GPIO,
+		.control_offset	= REG_GPIO_SIH_CTRL,
+		.set_cor	= true,
+		.bits		= TWL4030_GPIO_MAX,
+		.bytes_ixr	= 3,
+		/* Note: *all* of these IRQs default to no-trigger */
+		.edr_offset	= REG_GPIO_EDR1,
+		.bytes_edr	= 5,
+		.irq_lines	= 2,
+		.mask = { {
+			.isr_offset	= REG_GPIO_ISR1A,
+			.imr_offset	= REG_GPIO_IMR1A,
+		}, {
+			.isr_offset	= REG_GPIO_ISR1B,
+			.imr_offset	= REG_GPIO_IMR1B,
+		}, },
+	},
+	[1] = {
+		.name		= "keypad",
+		.set_cor	= true,
+		SIH_INITIALIZER(KEYPAD_KEYP, 4)
+	},
+	[2] = {
+		.name		= "bci",
+		.module		= TWL5031_MODULE_INTERRUPTS,
+		.control_offset	= TWL5031_INTERRUPTS_BCISIHCTRL,
+		.bits		= 7,
+		.bytes_ixr	= 1,
+		.edr_offset	= TWL5031_INTERRUPTS_BCIEDR1,
+		/* Note: most of these IRQs default to no-trigger */
+		.bytes_edr	= 2,
+		.irq_lines	= 2,
+		.mask = { {
+			.isr_offset	= TWL5031_INTERRUPTS_BCIISR1,
+			.imr_offset	= TWL5031_INTERRUPTS_BCIIMR1,
+		}, {
+			.isr_offset	= TWL5031_INTERRUPTS_BCIISR2,
+			.imr_offset	= TWL5031_INTERRUPTS_BCIIMR2,
+		}, },
+	},
+	[3] = {
+		.name		= "madc",
+		SIH_INITIALIZER(MADC, 4)
+	},
+	[4] = {
+		/* USB doesn't use the same SIH organization */
+		.name		= "usb",
+	},
+	[5] = {
+		.name		= "power",
+		.set_cor	= true,
+		SIH_INITIALIZER(INT_PWR, 8)
+	},
+	[6] = {
+		/*
+		 * ACI doesn't use the same SIH organization.
+		 * For example, it supports only one interrupt line
+		 */
+		.name		= "aci",
+		.module		= TWL5031_MODULE_ACCESSORY,
+		.bits		= 9,
+		.bytes_ixr	= 2,
+		.irq_lines	= 1,
+		.mask = { {
+			.isr_offset	= TWL5031_ACIIDR_LSB,
+			.imr_offset	= TWL5031_ACIIMR_LSB,
+		}, },
+
+	},
+	[7] = {
+		/* Accessory */
+		.name		= "acc",
+		.module		= TWL5031_MODULE_ACCESSORY,
+		.control_offset	= TWL5031_ACCSIHCTRL,
+		.bits		= 2,
+		.bytes_ixr	= 1,
+		.edr_offset	= TWL5031_ACCEDR1,
+		/* Note: most of these IRQs default to no-trigger */
+		.bytes_edr	= 1,
+		.irq_lines	= 2,
+		.mask = { {
+			.isr_offset	= TWL5031_ACCISR1,
+			.imr_offset	= TWL5031_ACCIMR1,
+		}, {
+			.isr_offset	= TWL5031_ACCISR2,
+			.imr_offset	= TWL5031_ACCIMR2,
+		}, },
+	},
+};
+
 #undef TWL4030_MODULE_KEYPAD_KEYP
 #undef TWL4030_MODULE_INT_PWR
 #undef TWL4030_INT_PWR_EDR
@@ -194,7 +296,7 @@ static int twl4030_irq_thread(void *data)
 		/* Wait for IRQ, then read PIH irq status (also blocking) */
 		wait_for_completion_interruptible(&irq_event);
 
-		ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+		ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
 					  REG_PIH_ISR_P1);
 		if (ret) {
 			pr_warning("twl4030: I2C error %d reading PIH ISR\n",
@@ -284,13 +386,17 @@ static int twl4030_init_sih_modules(unsigned line)
 	/* disable all interrupts on our line */
 	memset(buf, 0xff, sizeof buf);
 	sih = sih_modules;
-	for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+	for (i = 0; i < nr_sih_modules; i++, sih++) {
 
 		/* skip USB -- it's funky */
 		if (!sih->bytes_ixr)
 			continue;
 
-		status = twl4030_i2c_write(sih->module, buf,
+		/* Not all the SIH modules support multiple interrupt lines */
+		if (sih->irq_lines <= line)
+			continue;
+
+		status = twl_i2c_write(sih->module, buf,
 				sih->mask[line].imr_offset, sih->bytes_ixr);
 		if (status < 0)
 			pr_err("twl4030: err %d initializing %s %s\n",
@@ -304,7 +410,7 @@ static int twl4030_init_sih_modules(unsigned line)
 		 * And for PWR_INT it's not documented...
 		 */
 		if (sih->set_cor) {
-			status = twl4030_i2c_write_u8(sih->module,
+			status = twl_i2c_write_u8(sih->module,
 					TWL4030_SIH_CTRL_COR_MASK,
 					sih->control_offset);
 			if (status < 0)
@@ -314,7 +420,7 @@ static int twl4030_init_sih_modules(unsigned line)
 	}
 
 	sih = sih_modules;
-	for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+	for (i = 0; i < nr_sih_modules; i++, sih++) {
 		u8 rxbuf[4];
 		int j;
 
@@ -322,20 +428,24 @@ static int twl4030_init_sih_modules(unsigned line)
 		if (!sih->bytes_ixr)
 			continue;
 
+		/* Not all the SIH modules support multiple interrupt lines */
+		if (sih->irq_lines <= line)
+			continue;
+
 		/* Clear pending interrupt status.  Either the read was
 		 * enough, or we need to write those bits.  Repeat, in
 		 * case an IRQ is pending (PENDDIS=0) ... that's not
 		 * uncommon with PWR_INT.PWRON.
 		 */
 		for (j = 0; j < 2; j++) {
-			status = twl4030_i2c_read(sih->module, rxbuf,
+			status = twl_i2c_read(sih->module, rxbuf,
 				sih->mask[line].isr_offset, sih->bytes_ixr);
 			if (status < 0)
 				pr_err("twl4030: err %d initializing %s %s\n",
 					status, sih->name, "ISR");
 
 			if (!sih->set_cor)
-				status = twl4030_i2c_write(sih->module, buf,
+				status = twl_i2c_write(sih->module, buf,
 					sih->mask[line].isr_offset,
 					sih->bytes_ixr);
 			/* else COR=1 means read sufficed.
@@ -404,7 +514,7 @@ static void twl4030_sih_do_mask(struct work_struct *work)
 		return;
 
 	/* write the whole mask ... simpler than subsetting it */
-	status = twl4030_i2c_write(sih->module, imr.bytes,
+	status = twl_i2c_write(sih->module, imr.bytes,
 			sih->mask[irq_line].imr_offset, sih->bytes_ixr);
 	if (status)
 		pr_err("twl4030: %s, %s --> %d\n", __func__,
@@ -435,7 +545,7 @@ static void twl4030_sih_do_edge(struct work_struct *work)
 	 * any processor on the other IRQ line, EDR registers are
 	 * shared.
 	 */
-	status = twl4030_i2c_read(sih->module, bytes + 1,
+	status = twl_i2c_read(sih->module, bytes + 1,
 			sih->edr_offset, sih->bytes_edr);
 	if (status) {
 		pr_err("twl4030: %s, %s --> %d\n", __func__,
@@ -469,7 +579,7 @@ static void twl4030_sih_do_edge(struct work_struct *work)
 	}
 
 	/* Write */
-	status = twl4030_i2c_write(sih->module, bytes,
+	status = twl_i2c_write(sih->module, bytes,
 			sih->edr_offset, sih->bytes_edr);
 	if (status)
 		pr_err("twl4030: %s, %s --> %d\n", __func__,
@@ -554,7 +664,7 @@ static inline int sih_read_isr(const struct sih *sih)
 	/* FIXME need retry-on-error ... */
 
 	isr.word = 0;
-	status = twl4030_i2c_read(sih->module, isr.bytes,
+	status = twl_i2c_read(sih->module, isr.bytes,
 			sih->mask[irq_line].isr_offset, sih->bytes_ixr);
 
 	return (status < 0) ? status : le32_to_cpu(isr.word);
@@ -611,7 +721,7 @@ int twl4030_sih_setup(int module)
 
 	/* only support modules with standard clear-on-read for now */
 	for (sih_mod = 0, sih = sih_modules;
-			sih_mod < ARRAY_SIZE(sih_modules);
+			sih_mod < nr_sih_modules;
 			sih_mod++, sih++) {
 		if (sih->module == module && sih->set_cor) {
 			if (!WARN((irq_base + sih->bits) > NR_IRQS,
@@ -668,7 +778,7 @@ int twl4030_sih_setup(int module)
 /* FIXME pass in which interrupt line we'll use ... */
 #define twl_irq_line	0
 
-int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
+int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 {
 	static struct irq_chip	twl4030_irq_chip;
 
@@ -728,7 +838,8 @@ int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
 		goto fail_rqirq;
 	}
 
-	task = kthread_run(twl4030_irq_thread, (void *)irq_num, "twl4030-irq");
+	task = kthread_run(twl4030_irq_thread, (void *)(long)irq_num,
+								"twl4030-irq");
 	if (IS_ERR(task)) {
 		pr_err("twl4030: could not create irq %d thread!\n", irq_num);
 		status = PTR_ERR(task);
@@ -747,7 +858,7 @@ fail:
 	return status;
 }
 
-int twl_exit_irq(void)
+int twl4030_exit_irq(void)
 {
 	/* FIXME undo twl_init_irq() */
 	if (twl4030_irq_base) {
@@ -756,3 +867,16 @@ int twl_exit_irq(void)
 	}
 	return 0;
 }
+
+int twl4030_init_chip_irq(const char *chip)
+{
+	if (!strcmp(chip, "twl5031")) {
+		sih_modules = sih_modules_twl5031;
+		nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
+	} else {
+		sih_modules = sih_modules_twl4030;
+		nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
+	}
+
+	return 0;
+}
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index d423e0c4176b..0815292fdafc 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -26,7 +26,7 @@
 
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
@@ -67,19 +67,35 @@ static u8 twl4030_start_script_address = 0x2b;
 #define R_KEY_1			0xC0
 #define R_KEY_2			0x0C
 
-/* resource configuration registers */
-
-#define DEVGROUP_OFFSET		0
+/* resource configuration registers
+   <RESOURCE>_DEV_GRP   at address 'n+0'
+   <RESOURCE>_TYPE      at address 'n+1'
+   <RESOURCE>_REMAP     at address 'n+2'
+   <RESOURCE>_DEDICATED at address 'n+3'
+*/
+#define DEV_GRP_OFFSET		0
 #define TYPE_OFFSET		1
+#define REMAP_OFFSET		2
+#define DEDICATED_OFFSET	3
+
+/* Bit positions in the registers */
+
+/* <RESOURCE>_DEV_GRP */
+#define DEV_GRP_SHIFT		5
+#define DEV_GRP_MASK		(7 << DEV_GRP_SHIFT)
 
-/* Bit positions */
-#define DEVGROUP_SHIFT		5
-#define DEVGROUP_MASK		(7 << DEVGROUP_SHIFT)
+/* <RESOURCE>_TYPE */
 #define TYPE_SHIFT		0
 #define TYPE_MASK		(7 << TYPE_SHIFT)
 #define TYPE2_SHIFT		3
 #define TYPE2_MASK		(3 << TYPE2_SHIFT)
 
+/* <RESOURCE>_REMAP */
+#define SLEEP_STATE_SHIFT	0
+#define SLEEP_STATE_MASK	(0xf << SLEEP_STATE_SHIFT)
+#define OFF_STATE_SHIFT		4
+#define OFF_STATE_MASK		(0xf << OFF_STATE_SHIFT)
+
 static u8 res_config_addrs[] = {
 	[RES_VAUX1]	= 0x17,
 	[RES_VAUX2]	= 0x1b,
@@ -115,11 +131,11 @@ static int __init twl4030_write_script_byte(u8 address, u8 byte)
 {
 	int err;
 
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
 				R_MEMORY_ADDRESS);
 	if (err)
 		goto out;
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
 				R_MEMORY_DATA);
 out:
 	return err;
@@ -176,18 +192,18 @@ static int __init twl4030_config_wakeup3_sequence(u8 address)
 	u8 data;
 
 	/* Set SLEEP to ACTIVE SEQ address for P3 */
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
 				R_SEQ_ADD_S2A3);
 	if (err)
 		goto out;
 
 	/* P3 LVL_WAKEUP should be on LEVEL */
-	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
 				R_P3_SW_EVENTS);
 	if (err)
 		goto out;
 	data |= LVL_WAKEUP;
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
 				R_P3_SW_EVENTS);
 out:
 	if (err)
@@ -201,42 +217,42 @@ static int __init twl4030_config_wakeup12_sequence(u8 address)
 	u8 data;
 
 	/* Set SLEEP to ACTIVE SEQ address for P1 and P2 */
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
 				R_SEQ_ADD_S2A12);
 	if (err)
 		goto out;
 
 	/* P1/P2 LVL_WAKEUP should be on LEVEL */
-	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
 				R_P1_SW_EVENTS);
 	if (err)
 		goto out;
 
 	data |= LVL_WAKEUP;
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
 				R_P1_SW_EVENTS);
 	if (err)
 		goto out;
 
-	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
 				R_P2_SW_EVENTS);
 	if (err)
 		goto out;
 
 	data |= LVL_WAKEUP;
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
 				R_P2_SW_EVENTS);
 	if (err)
 		goto out;
 
 	if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) {
 		/* Disabling AC charger effect on sleep-active transitions */
-		err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+		err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
 					R_CFG_P1_TRANSITION);
 		if (err)
 			goto out;
 		data &= ~(1<<1);
-		err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
+		err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
 					R_CFG_P1_TRANSITION);
 		if (err)
 			goto out;
@@ -254,7 +270,7 @@ static int __init twl4030_config_sleep_sequence(u8 address)
 	int err;
 
 	/* Set ACTIVE to SLEEP SEQ address in T2 memory*/
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
 				R_SEQ_ADD_A2S);
 
 	if (err)
@@ -269,41 +285,41 @@ static int __init twl4030_config_warmreset_sequence(u8 address)
 	u8 rd_data;
 
 	/* Set WARM RESET SEQ address for P1 */
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
 				R_SEQ_ADD_WARM);
 	if (err)
 		goto out;
 
 	/* P1/P2/P3 enable WARMRESET */
-	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
 				R_P1_SW_EVENTS);
 	if (err)
 		goto out;
 
 	rd_data |= ENABLE_WARMRESET;
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
 				R_P1_SW_EVENTS);
 	if (err)
 		goto out;
 
-	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
 				R_P2_SW_EVENTS);
 	if (err)
 		goto out;
 
 	rd_data |= ENABLE_WARMRESET;
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
 				R_P2_SW_EVENTS);
 	if (err)
 		goto out;
 
-	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
 				R_P3_SW_EVENTS);
 	if (err)
 		goto out;
 
 	rd_data |= ENABLE_WARMRESET;
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
 				R_P3_SW_EVENTS);
 out:
 	if (err)
@@ -317,6 +333,7 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
 	int err;
 	u8 type;
 	u8 grp;
+	u8 remap;
 
 	if (rconfig->resource > TOTAL_RESOURCES) {
 		pr_err("TWL4030 Resource %d does not exist\n",
@@ -327,19 +344,19 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
 	rconfig_addr = res_config_addrs[rconfig->resource];
 
 	/* Set resource group */
-	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp,
-				rconfig_addr + DEVGROUP_OFFSET);
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp,
+			      rconfig_addr + DEV_GRP_OFFSET);
 	if (err) {
 		pr_err("TWL4030 Resource %d group could not be read\n",
 			rconfig->resource);
 		return err;
 	}
 
-	if (rconfig->devgroup >= 0) {
-		grp &= ~DEVGROUP_MASK;
-		grp |= rconfig->devgroup << DEVGROUP_SHIFT;
-		err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					grp, rconfig_addr + DEVGROUP_OFFSET);
+	if (rconfig->devgroup != TWL4030_RESCONFIG_UNDEF) {
+		grp &= ~DEV_GRP_MASK;
+		grp |= rconfig->devgroup << DEV_GRP_SHIFT;
+		err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+				       grp, rconfig_addr + DEV_GRP_OFFSET);
 		if (err < 0) {
 			pr_err("TWL4030 failed to program devgroup\n");
 			return err;
@@ -347,7 +364,7 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
 	}
 
 	/* Set resource types */
-	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
 				rconfig_addr + TYPE_OFFSET);
 	if (err < 0) {
 		pr_err("TWL4030 Resource %d type could not be read\n",
@@ -355,23 +372,50 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
 		return err;
 	}
 
-	if (rconfig->type >= 0) {
+	if (rconfig->type != TWL4030_RESCONFIG_UNDEF) {
 		type &= ~TYPE_MASK;
 		type |= rconfig->type << TYPE_SHIFT;
 	}
 
-	if (rconfig->type2 >= 0) {
+	if (rconfig->type2 != TWL4030_RESCONFIG_UNDEF) {
 		type &= ~TYPE2_MASK;
 		type |= rconfig->type2 << TYPE2_SHIFT;
 	}
 
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
 				type, rconfig_addr + TYPE_OFFSET);
 	if (err < 0) {
 		pr_err("TWL4030 failed to program resource type\n");
 		return err;
 	}
 
+	/* Set remap states */
+	err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &remap,
+			      rconfig_addr + REMAP_OFFSET);
+	if (err < 0) {
+		pr_err("TWL4030 Resource %d remap could not be read\n",
+			rconfig->resource);
+		return err;
+	}
+
+	if (rconfig->remap_off != TWL4030_RESCONFIG_UNDEF) {
+		remap &= ~OFF_STATE_MASK;
+		remap |= rconfig->remap_off << OFF_STATE_SHIFT;
+	}
+
+	if (rconfig->remap_sleep != TWL4030_RESCONFIG_UNDEF) {
+		remap &= ~SLEEP_STATE_MASK;
+		remap |= rconfig->remap_off << SLEEP_STATE_SHIFT;
+	}
+
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+			       remap,
+			       rconfig_addr + REMAP_OFFSET);
+	if (err < 0) {
+		pr_err("TWL4030 failed to program remap\n");
+		return err;
+	}
+
 	return 0;
 }
 
@@ -424,12 +468,12 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
 	struct twl4030_resconfig *resconfig;
 	u8 address = twl4030_start_script_address;
 
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1,
 				R_PROTECT_KEY);
 	if (err)
 		goto unlock;
 
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2,
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2,
 				R_PROTECT_KEY);
 	if (err)
 		goto unlock;
@@ -452,7 +496,7 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
 		}
 	}
 
-	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
 	if (err)
 		pr_err("TWL4030 Unable to relock registers\n");
 	return;
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
new file mode 100644
index 000000000000..10bf228ad626
--- /dev/null
+++ b/drivers/mfd/twl6030-irq.c
@@ -0,0 +1,299 @@
+/*
+ * twl6030-irq.c - TWL6030 irq support
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *
+ * Modifications to defer interrupt handling to a kernel thread:
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Code cleanup and modifications to IRQ handler.
+ * by syed khasim <x0khasim@ti.com>
+ *
+ * TWL6030 specific code and IRQ handling changes by
+ * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
+ * Balaji T K <balajitk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kthread.h>
+#include <linux/i2c/twl.h>
+
+/*
+ * TWL6030 (unlike its predecessors, which had two level interrupt handling)
+ * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
+ * It exposes status bits saying who has raised an interrupt. There are
+ * three mask registers that corresponds to these status registers, that
+ * enables/disables these interrupts.
+ *
+ * We set up IRQs starting at a platform-specified base. An interrupt map table,
+ * specifies mapping between interrupt number and the associated module.
+ *
+ */
+
+static int twl6030_interrupt_mapping[24] = {
+	PWR_INTR_OFFSET,	/* Bit 0	PWRON			*/
+	PWR_INTR_OFFSET,	/* Bit 1	RPWRON			*/
+	PWR_INTR_OFFSET,	/* Bit 2	BAT_VLOW		*/
+	RTC_INTR_OFFSET,	/* Bit 3	RTC_ALARM		*/
+	RTC_INTR_OFFSET,	/* Bit 4	RTC_PERIOD		*/
+	HOTDIE_INTR_OFFSET,	/* Bit 5	HOT_DIE			*/
+	SMPSLDO_INTR_OFFSET,	/* Bit 6	VXXX_SHORT		*/
+	SMPSLDO_INTR_OFFSET,	/* Bit 7	VMMC_SHORT		*/
+
+	SMPSLDO_INTR_OFFSET,	/* Bit 8	VUSIM_SHORT		*/
+	BATDETECT_INTR_OFFSET,	/* Bit 9	BAT			*/
+	SIMDETECT_INTR_OFFSET,	/* Bit 10	SIM			*/
+	MMCDETECT_INTR_OFFSET,	/* Bit 11	MMC			*/
+	RSV_INTR_OFFSET,  	/* Bit 12	Reserved		*/
+	MADC_INTR_OFFSET,	/* Bit 13	GPADC_RT_EOC		*/
+	MADC_INTR_OFFSET,	/* Bit 14	GPADC_SW_EOC		*/
+	GASGAUGE_INTR_OFFSET,	/* Bit 15	CC_AUTOCAL		*/
+
+	USBOTG_INTR_OFFSET,	/* Bit 16	ID_WKUP			*/
+	USBOTG_INTR_OFFSET,	/* Bit 17	VBUS_WKUP		*/
+	USBOTG_INTR_OFFSET,	/* Bit 18	ID			*/
+	USBOTG_INTR_OFFSET,	/* Bit 19	VBUS			*/
+	CHARGER_INTR_OFFSET,	/* Bit 20	CHRG_CTRL		*/
+	CHARGER_INTR_OFFSET,	/* Bit 21	EXT_CHRG		*/
+	CHARGER_INTR_OFFSET,	/* Bit 22	INT_CHRG		*/
+	RSV_INTR_OFFSET,	/* Bit 23	Reserved		*/
+};
+/*----------------------------------------------------------------------*/
+
+static unsigned twl6030_irq_base;
+
+static struct completion irq_event;
+
+/*
+ * This thread processes interrupts reported by the Primary Interrupt Handler.
+ */
+static int twl6030_irq_thread(void *data)
+{
+	long irq = (long)data;
+	static unsigned i2c_errors;
+	static const unsigned max_i2c_errors = 100;
+	int ret;
+
+	current->flags |= PF_NOFREEZE;
+
+	while (!kthread_should_stop()) {
+		int i;
+		union {
+		u8 bytes[4];
+		u32 int_sts;
+		} sts;
+
+		/* Wait for IRQ, then read PIH irq status (also blocking) */
+		wait_for_completion_interruptible(&irq_event);
+
+		/* read INT_STS_A, B and C in one shot using a burst read */
+		ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes,
+				REG_INT_STS_A, 3);
+		if (ret) {
+			pr_warning("twl6030: I2C error %d reading PIH ISR\n",
+					ret);
+			if (++i2c_errors >= max_i2c_errors) {
+				printk(KERN_ERR "Maximum I2C error count"
+						" exceeded.  Terminating %s.\n",
+						__func__);
+				break;
+			}
+			complete(&irq_event);
+			continue;
+		}
+
+
+
+		sts.bytes[3] = 0; /* Only 24 bits are valid*/
+
+		for (i = 0; sts.int_sts; sts.int_sts >>= 1, i++) {
+			local_irq_disable();
+			if (sts.int_sts & 0x1) {
+				int module_irq = twl6030_irq_base +
+					twl6030_interrupt_mapping[i];
+				struct irq_desc *d = irq_to_desc(module_irq);
+
+				if (!d) {
+					pr_err("twl6030: Invalid SIH IRQ: %d\n",
+					       module_irq);
+					return -EINVAL;
+				}
+
+				/* These can't be masked ... always warn
+				 * if we get any surprises.
+				 */
+				if (d->status & IRQ_DISABLED)
+					note_interrupt(module_irq, d,
+							IRQ_NONE);
+				else
+					d->handle_irq(module_irq, d);
+
+			}
+		local_irq_enable();
+		}
+		ret = twl_i2c_write(TWL_MODULE_PIH, sts.bytes,
+				REG_INT_STS_A, 3); /* clear INT_STS_A */
+		if (ret)
+			pr_warning("twl6030: I2C error in clearing PIH ISR\n");
+
+		enable_irq(irq);
+	}
+
+	return 0;
+}
+
+/*
+ * handle_twl6030_int() is the desc->handle method for the twl6030 interrupt.
+ * This is a chained interrupt, so there is no desc->action method for it.
+ * Now we need to query the interrupt controller in the twl6030 to determine
+ * which module is generating the interrupt request.  However, we can't do i2c
+ * transactions in interrupt context, so we must defer that work to a kernel
+ * thread.  All we do here is acknowledge and mask the interrupt and wakeup
+ * the kernel thread.
+ */
+static irqreturn_t handle_twl6030_pih(int irq, void *devid)
+{
+	disable_irq_nosync(irq);
+	complete(devid);
+	return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+static inline void activate_irq(int irq)
+{
+#ifdef CONFIG_ARM
+	/* ARM requires an extra step to clear IRQ_NOREQUEST, which it
+	 * sets on behalf of every irq_chip.  Also sets IRQ_NOPROBE.
+	 */
+	set_irq_flags(irq, IRQF_VALID);
+#else
+	/* same effect on other architectures */
+	set_irq_noprobe(irq);
+#endif
+}
+
+/*----------------------------------------------------------------------*/
+
+static unsigned twl6030_irq_next;
+
+/*----------------------------------------------------------------------*/
+int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
+{
+	int ret;
+	u8 unmask_value;
+	ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
+			REG_INT_STS_A + offset);
+	unmask_value &= (~(bit_mask));
+	ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
+			REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
+	return ret;
+}
+EXPORT_SYMBOL(twl6030_interrupt_unmask);
+
+int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
+{
+	int ret;
+	u8 mask_value;
+	ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
+			REG_INT_STS_A + offset);
+	mask_value |= (bit_mask);
+	ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
+			REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
+	return ret;
+}
+EXPORT_SYMBOL(twl6030_interrupt_mask);
+
+int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
+{
+
+	int	status = 0;
+	int	i;
+	struct task_struct	*task;
+	int ret;
+	u8 mask[4];
+
+	static struct irq_chip	twl6030_irq_chip;
+	mask[1] = 0xFF;
+	mask[2] = 0xFF;
+	mask[3] = 0xFF;
+	ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
+			REG_INT_MSK_LINE_A, 3); /* MASK ALL INT LINES */
+	ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
+			REG_INT_MSK_STS_A, 3); /* MASK ALL INT STS */
+	ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
+			REG_INT_STS_A, 3); /* clear INT_STS_A,B,C */
+
+	twl6030_irq_base = irq_base;
+
+	/* install an irq handler for each of the modules;
+	 * clone dummy irq_chip since PIH can't *do* anything
+	 */
+	twl6030_irq_chip = dummy_irq_chip;
+	twl6030_irq_chip.name = "twl6030";
+	twl6030_irq_chip.set_type = NULL;
+
+	for (i = irq_base; i < irq_end; i++) {
+		set_irq_chip_and_handler(i, &twl6030_irq_chip,
+				handle_simple_irq);
+		activate_irq(i);
+	}
+
+	twl6030_irq_next = i;
+	pr_info("twl6030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
+			irq_num, irq_base, twl6030_irq_next - 1);
+
+	/* install an irq handler to demultiplex the TWL6030 interrupt */
+	init_completion(&irq_event);
+	task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq");
+	if (IS_ERR(task)) {
+		pr_err("twl6030: could not create irq %d thread!\n", irq_num);
+		status = PTR_ERR(task);
+		goto fail_kthread;
+	}
+
+	status = request_irq(irq_num, handle_twl6030_pih, IRQF_DISABLED,
+				"TWL6030-PIH", &irq_event);
+	if (status < 0) {
+		pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
+		goto fail_irq;
+	}
+	return status;
+fail_irq:
+	free_irq(irq_num, &irq_event);
+
+fail_kthread:
+	for (i = irq_base; i < irq_end; i++)
+		set_irq_chip_and_handler(i, NULL, NULL);
+	return status;
+}
+
+int twl6030_exit_irq(void)
+{
+
+	if (twl6030_irq_base) {
+		pr_err("twl6030: can't yet clean up IRQs?\n");
+		return -ENOSYS;
+	}
+	return 0;
+}
+
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 7f27576ca046..223a90c7492f 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -90,9 +90,10 @@ int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1] = {
 EXPORT_SYMBOL_GPL(wm831x_isinkv_values);
 
 enum wm831x_parent {
-	WM8310 = 0,
-	WM8311 = 1,
-	WM8312 = 2,
+	WM8310 = 0x8310,
+	WM8311 = 0x8311,
+	WM8312 = 0x8312,
+	WM8320 = 0x8320,
 };
 
 static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
@@ -478,6 +479,20 @@ static struct resource wm831x_dcdc4_resources[] = {
 	},
 };
 
+static struct resource wm8320_dcdc4_buck_resources[] = {
+	{
+		.start = WM831X_DC4_CONTROL,
+		.end   = WM832X_DC4_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_DC4,
+		.end   = WM831X_IRQ_UV_DC4,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static struct resource wm831x_gpio_resources[] = {
 	{
 		.start = WM831X_IRQ_GPIO_1,
@@ -1237,6 +1252,137 @@ static struct mfd_cell wm8312_devs[] = {
 	},
 };
 
+static struct mfd_cell wm8320_devs[] = {
+	{
+		.name = "wm831x-backup",
+	},
+	{
+		.name = "wm831x-buckv",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+		.resources = wm831x_dcdc1_resources,
+	},
+	{
+		.name = "wm831x-buckv",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+		.resources = wm831x_dcdc2_resources,
+	},
+	{
+		.name = "wm831x-buckp",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+		.resources = wm831x_dcdc3_resources,
+	},
+	{
+		.name = "wm831x-buckp",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm8320_dcdc4_buck_resources),
+		.resources = wm8320_dcdc4_buck_resources,
+	},
+	{
+		.name = "wm831x-gpio",
+		.num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+		.resources = wm831x_gpio_resources,
+	},
+	{
+		.name = "wm831x-hwmon",
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+		.resources = wm831x_ldo1_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+		.resources = wm831x_ldo2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+		.resources = wm831x_ldo3_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+		.resources = wm831x_ldo4_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 5,
+		.num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+		.resources = wm831x_ldo5_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 6,
+		.num_resources = ARRAY_SIZE(wm831x_ldo6_resources),
+		.resources = wm831x_ldo6_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 7,
+		.num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+		.resources = wm831x_ldo7_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 8,
+		.num_resources = ARRAY_SIZE(wm831x_ldo8_resources),
+		.resources = wm831x_ldo8_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 9,
+		.num_resources = ARRAY_SIZE(wm831x_ldo9_resources),
+		.resources = wm831x_ldo9_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 10,
+		.num_resources = ARRAY_SIZE(wm831x_ldo10_resources),
+		.resources = wm831x_ldo10_resources,
+	},
+	{
+		.name = "wm831x-alive-ldo",
+		.id = 11,
+		.num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+		.resources = wm831x_ldo11_resources,
+	},
+	{
+		.name = "wm831x-on",
+		.num_resources = ARRAY_SIZE(wm831x_on_resources),
+		.resources = wm831x_on_resources,
+	},
+	{
+		.name = "wm831x-rtc",
+		.num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+		.resources = wm831x_rtc_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_status1_resources),
+		.resources = wm831x_status1_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_status2_resources),
+		.resources = wm831x_status2_resources,
+	},
+	{
+		.name = "wm831x-watchdog",
+		.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+		.resources = wm831x_wdt_resources,
+	},
+};
+
 static struct mfd_cell backlight_devs[] = {
 	{
 		.name = "wm831x-backlight",
@@ -1282,50 +1428,37 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 		goto err;
 	}
 
+	/* Some engineering samples do not have the ID set, rely on
+	 * the device being registered correctly.
+	 */
+	if (ret == 0) {
+		dev_info(wm831x->dev, "Device is an engineering sample\n");
+		ret = id;
+	}
+
 	switch (ret) {
-	case 0x8310:
+	case WM8310:
 		parent = WM8310;
-		switch (rev) {
-		case 0:
-			dev_info(wm831x->dev, "WM8310 revision %c\n",
-				 'A' + rev);
-			break;
-		}
+		wm831x->num_gpio = 16;
+		dev_info(wm831x->dev, "WM8310 revision %c\n", 'A' + rev);
 		break;
 
-	case 0x8311:
+	case WM8311:
 		parent = WM8311;
-		switch (rev) {
-		case 0:
-			dev_info(wm831x->dev, "WM8311 revision %c\n",
-				 'A' + rev);
-			break;
-		}
+		wm831x->num_gpio = 16;
+		dev_info(wm831x->dev, "WM8311 revision %c\n", 'A' + rev);
 		break;
 
-	case 0x8312:
+	case WM8312:
 		parent = WM8312;
-		switch (rev) {
-		case 0:
-			dev_info(wm831x->dev, "WM8312 revision %c\n",
-				 'A' + rev);
-			break;
-		}
+		wm831x->num_gpio = 16;
+		dev_info(wm831x->dev, "WM8312 revision %c\n", 'A' + rev);
 		break;
 
-	case 0:
-		/* Some engineering samples do not have the ID set,
-		 * rely on the device being registered correctly.
-		 * This will need revisiting for future devices with
-		 * multiple dies.
-		 */
-		parent = id;
-		switch (rev) {
-		case 0:
-			dev_info(wm831x->dev, "WM831%d ES revision %c\n",
-				 parent, 'A' + rev);
-			break;
-		}
+	case WM8320:
+		parent = WM8320;
+		wm831x->num_gpio = 12;
+		dev_info(wm831x->dev, "WM8320 revision %c\n", 'A' + rev);
 		break;
 
 	default:
@@ -1338,7 +1471,7 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	 * current parts.
 	 */
 	if (parent != id)
-		dev_warn(wm831x->dev, "Device was registered as a WM831%lu\n",
+		dev_warn(wm831x->dev, "Device was registered as a WM%lx\n",
 			 id);
 
 	/* Bootstrap the user key */
@@ -1371,18 +1504,24 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	case WM8310:
 		ret = mfd_add_devices(wm831x->dev, -1,
 				      wm8310_devs, ARRAY_SIZE(wm8310_devs),
-				      NULL, 0);
+				      NULL, wm831x->irq_base);
 		break;
 
 	case WM8311:
 		ret = mfd_add_devices(wm831x->dev, -1,
 				      wm8311_devs, ARRAY_SIZE(wm8311_devs),
-				      NULL, 0);
+				      NULL, wm831x->irq_base);
 		break;
 
 	case WM8312:
 		ret = mfd_add_devices(wm831x->dev, -1,
 				      wm8312_devs, ARRAY_SIZE(wm8312_devs),
+				      NULL, wm831x->irq_base);
+		break;
+
+	case WM8320:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8320_devs, ARRAY_SIZE(wm8320_devs),
 				      NULL, 0);
 		break;
 
@@ -1399,7 +1538,8 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	if (pdata && pdata->backlight) {
 		/* Treat errors as non-critical */
 		ret = mfd_add_devices(wm831x->dev, -1, backlight_devs,
-				      ARRAY_SIZE(backlight_devs), NULL, 0);
+				      ARRAY_SIZE(backlight_devs), NULL,
+				      wm831x->irq_base);
 		if (ret < 0)
 			dev_err(wm831x->dev, "Failed to add backlight: %d\n",
 				ret);
@@ -1511,6 +1651,7 @@ static const struct i2c_device_id wm831x_i2c_id[] = {
 	{ "wm8310", WM8310 },
 	{ "wm8311", WM8311 },
 	{ "wm8312", WM8312 },
+	{ "wm8320", WM8320 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index ac056ea6b66e..301327697117 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
+#include <linux/irq.h>
 #include <linux/mfd/core.h>
 #include <linux/interrupt.h>
 
@@ -339,110 +340,71 @@ static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
 	return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
 }
 
-static void __wm831x_enable_irq(struct wm831x *wm831x, int irq)
+static inline struct wm831x_irq_data *irq_to_wm831x_irq(struct wm831x *wm831x,
+							int irq)
 {
-	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
-
-	wm831x->irq_masks[irq_data->reg - 1] &= ~irq_data->mask;
-	wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
-			 wm831x->irq_masks[irq_data->reg - 1]);
+	return &wm831x_irqs[irq - wm831x->irq_base];
 }
 
-void wm831x_enable_irq(struct wm831x *wm831x, int irq)
+static void wm831x_irq_lock(unsigned int irq)
 {
-	mutex_lock(&wm831x->irq_lock);
-	__wm831x_enable_irq(wm831x, irq);
-	mutex_unlock(&wm831x->irq_lock);
-}
-EXPORT_SYMBOL_GPL(wm831x_enable_irq);
+	struct wm831x *wm831x = get_irq_chip_data(irq);
 
-static void __wm831x_disable_irq(struct wm831x *wm831x, int irq)
-{
-	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
-
-	wm831x->irq_masks[irq_data->reg - 1] |= irq_data->mask;
-	wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
-			 wm831x->irq_masks[irq_data->reg - 1]);
-}
-
-void wm831x_disable_irq(struct wm831x *wm831x, int irq)
-{
 	mutex_lock(&wm831x->irq_lock);
-	__wm831x_disable_irq(wm831x, irq);
-	mutex_unlock(&wm831x->irq_lock);
 }
-EXPORT_SYMBOL_GPL(wm831x_disable_irq);
 
-int wm831x_request_irq(struct wm831x *wm831x,
-		       unsigned int irq, irq_handler_t handler,
-		       unsigned long flags, const char *name,
-		       void *dev)
+static void wm831x_irq_sync_unlock(unsigned int irq)
 {
-	int ret = 0;
-
-	if (irq < 0 || irq >= WM831X_NUM_IRQS)
-		return -EINVAL;
-
-	mutex_lock(&wm831x->irq_lock);
-
-	if (wm831x_irqs[irq].handler) {
-		dev_err(wm831x->dev, "Already have handler for IRQ %d\n", irq);
-		ret = -EINVAL;
-		goto out;
+	struct wm831x *wm831x = get_irq_chip_data(irq);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
+		/* If there's been a change in the mask write it back
+		 * to the hardware. */
+		if (wm831x->irq_masks_cur[i] != wm831x->irq_masks_cache[i]) {
+			wm831x->irq_masks_cache[i] = wm831x->irq_masks_cur[i];
+			wm831x_reg_write(wm831x,
+					 WM831X_INTERRUPT_STATUS_1_MASK + i,
+					 wm831x->irq_masks_cur[i]);
+		}
 	}
 
-	wm831x_irqs[irq].handler = handler;
-	wm831x_irqs[irq].handler_data = dev;
-
-	__wm831x_enable_irq(wm831x, irq);
-
-out:
 	mutex_unlock(&wm831x->irq_lock);
-
-	return ret;
 }
-EXPORT_SYMBOL_GPL(wm831x_request_irq);
 
-void wm831x_free_irq(struct wm831x *wm831x, unsigned int irq, void *data)
+static void wm831x_irq_unmask(unsigned int irq)
 {
-	if (irq < 0 || irq >= WM831X_NUM_IRQS)
-		return;
-
-	mutex_lock(&wm831x->irq_lock);
+	struct wm831x *wm831x = get_irq_chip_data(irq);
+	struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x, irq);
 
-	wm831x_irqs[irq].handler = NULL;
-	wm831x_irqs[irq].handler_data = NULL;
-
-	__wm831x_disable_irq(wm831x, irq);
-
-	mutex_unlock(&wm831x->irq_lock);
+	wm831x->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
 }
-EXPORT_SYMBOL_GPL(wm831x_free_irq);
 
-
-static void wm831x_handle_irq(struct wm831x *wm831x, int irq, int status)
+static void wm831x_irq_mask(unsigned int irq)
 {
-	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
-
-	if (irq_data->handler) {
-		irq_data->handler(irq, irq_data->handler_data);
-		wm831x_reg_write(wm831x, irq_data_to_status_reg(irq_data),
-				 irq_data->mask);
-	} else {
-		dev_err(wm831x->dev, "Unhandled IRQ %d, masking\n", irq);
-		__wm831x_disable_irq(wm831x, irq);
-	}
+	struct wm831x *wm831x = get_irq_chip_data(irq);
+	struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x, irq);
+
+	wm831x->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
 }
 
-/* Main interrupt handling occurs in a workqueue since we need
- * interrupts enabled to interact with the chip. */
-static void wm831x_irq_worker(struct work_struct *work)
+static struct irq_chip wm831x_irq_chip = {
+	.name = "wm831x",
+	.bus_lock = wm831x_irq_lock,
+	.bus_sync_unlock = wm831x_irq_sync_unlock,
+	.mask = wm831x_irq_mask,
+	.unmask = wm831x_irq_unmask,
+};
+
+/* The processing of the primary interrupt occurs in a thread so that
+ * we can interact with the device over I2C or SPI. */
+static irqreturn_t wm831x_irq_thread(int irq, void *data)
 {
-	struct wm831x *wm831x = container_of(work, struct wm831x, irq_work);
+	struct wm831x *wm831x = data;
 	unsigned int i;
 	int primary;
-	int status_regs[5];
-	int read[5] = { 0 };
+	int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
+	int read[WM831X_NUM_IRQ_REGS] = { 0 };
 	int *status;
 
 	primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
@@ -452,8 +414,6 @@ static void wm831x_irq_worker(struct work_struct *work)
 		goto out;
 	}
 
-	mutex_lock(&wm831x->irq_lock);
-
 	for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
 		int offset = wm831x_irqs[i].reg - 1;
 
@@ -471,41 +431,34 @@ static void wm831x_irq_worker(struct work_struct *work)
 				dev_err(wm831x->dev,
 					"Failed to read IRQ status: %d\n",
 					*status);
-				goto out_lock;
+				goto out;
 			}
 
-			/* Mask out the disabled IRQs */
-			*status &= ~wm831x->irq_masks[offset];
 			read[offset] = 1;
 		}
 
-		if (*status & wm831x_irqs[i].mask)
-			wm831x_handle_irq(wm831x, i, *status);
+		/* Report it if it isn't masked, or forget the status. */
+		if ((*status & ~wm831x->irq_masks_cur[offset])
+		    & wm831x_irqs[i].mask)
+			handle_nested_irq(wm831x->irq_base + i);
+		else
+			*status &= ~wm831x_irqs[i].mask;
 	}
 
-out_lock:
-	mutex_unlock(&wm831x->irq_lock);
 out:
-	enable_irq(wm831x->irq);
-}
-
-
-static irqreturn_t wm831x_cpu_irq(int irq, void *data)
-{
-	struct wm831x *wm831x = data;
-
-	/* Shut the interrupt to the CPU up and schedule the actual
-	 * handler; we can't check that the IRQ is asserted. */
-	disable_irq_nosync(irq);
-
-	queue_work(wm831x->irq_wq, &wm831x->irq_work);
+	for (i = 0; i < ARRAY_SIZE(status_regs); i++) {
+		if (status_regs[i])
+			wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1 + i,
+					 status_regs[i]);
+	}
 
 	return IRQ_HANDLED;
 }
 
 int wm831x_irq_init(struct wm831x *wm831x, int irq)
 {
-	int i, ret;
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int i, cur_irq, ret;
 
 	mutex_init(&wm831x->irq_lock);
 
@@ -515,41 +468,53 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 		return 0;
 	}
 
-
-	wm831x->irq_wq = create_singlethread_workqueue("wm831x-irq");
-	if (!wm831x->irq_wq) {
-		dev_err(wm831x->dev, "Failed to allocate IRQ worker\n");
-		return -ESRCH;
+	if (!pdata || !pdata->irq_base) {
+		dev_err(wm831x->dev,
+			"No interrupt base specified, no interrupts\n");
+		return 0;
 	}
 
 	wm831x->irq = irq;
-	INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
+	wm831x->irq_base = pdata->irq_base;
 
 	/* Mask the individual interrupt sources */
-	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks); i++) {
-		wm831x->irq_masks[i] = 0xffff;
+	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
+		wm831x->irq_masks_cur[i] = 0xffff;
+		wm831x->irq_masks_cache[i] = 0xffff;
 		wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
 				 0xffff);
 	}
 
-	/* Enable top level interrupts, we mask at secondary level */
-	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
+	/* Register them with genirq */
+	for (cur_irq = wm831x->irq_base;
+	     cur_irq < ARRAY_SIZE(wm831x_irqs) + wm831x->irq_base;
+	     cur_irq++) {
+		set_irq_chip_data(cur_irq, wm831x);
+		set_irq_chip_and_handler(cur_irq, &wm831x_irq_chip,
+					 handle_edge_irq);
+		set_irq_nested_thread(cur_irq, 1);
+
+		/* ARM needs us to explicitly flag the IRQ as valid
+		 * and will set them noprobe when we do so. */
+#ifdef CONFIG_ARM
+		set_irq_flags(cur_irq, IRQF_VALID);
+#else
+		set_irq_noprobe(cur_irq);
+#endif
+	}
 
-	/* We're good to go.  We set IRQF_SHARED since there's a
-	 * chance the driver will interoperate with another driver but
-	 * the need to disable the IRQ while handing via I2C/SPI means
-	 * that this may break and performance will be impacted.  If
-	 * this does happen it's a hardware design issue and the only
-	 * other alternative would be polling.
-	 */
-	ret = request_irq(irq, wm831x_cpu_irq, IRQF_TRIGGER_LOW | IRQF_SHARED,
-			  "wm831x", wm831x);
+	ret = request_threaded_irq(irq, NULL, wm831x_irq_thread,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   "wm831x", wm831x);
 	if (ret != 0) {
 		dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
 			irq, ret);
 		return ret;
 	}
 
+	/* Enable top level interrupts, we mask at secondary level */
+	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
+
 	return 0;
 }
 
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index ba27c9dc1ad3..8485a7018060 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -337,733 +337,6 @@ int wm8350_reg_unlock(struct wm8350 *wm8350)
 }
 EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
 
-static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq)
-{
-	mutex_lock(&wm8350->irq_mutex);
-
-	if (wm8350->irq[irq].handler)
-		wm8350->irq[irq].handler(wm8350, irq, wm8350->irq[irq].data);
-	else {
-		dev_err(wm8350->dev, "irq %d nobody cared. now masked.\n",
-			irq);
-		wm8350_mask_irq(wm8350, irq);
-	}
-
-	mutex_unlock(&wm8350->irq_mutex);
-}
-
-/*
- * This is a threaded IRQ handler so can access I2C/SPI.  Since all
- * interrupts are clear on read the IRQ line will be reasserted and
- * the physical IRQ will be handled again if another interrupt is
- * asserted while we run - in the normal course of events this is a
- * rare occurrence so we save I2C/SPI reads.
- */
-static irqreturn_t wm8350_irq(int irq, void *data)
-{
-	struct wm8350 *wm8350 = data;
-	u16 level_one, status1, status2, comp;
-
-	/* TODO: Use block reads to improve performance? */
-	level_one = wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS)
-		& ~wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK);
-	status1 = wm8350_reg_read(wm8350, WM8350_INT_STATUS_1)
-		& ~wm8350_reg_read(wm8350, WM8350_INT_STATUS_1_MASK);
-	status2 = wm8350_reg_read(wm8350, WM8350_INT_STATUS_2)
-		& ~wm8350_reg_read(wm8350, WM8350_INT_STATUS_2_MASK);
-	comp = wm8350_reg_read(wm8350, WM8350_COMPARATOR_INT_STATUS)
-		& ~wm8350_reg_read(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK);
-
-	/* over current */
-	if (level_one & WM8350_OC_INT) {
-		u16 oc;
-
-		oc = wm8350_reg_read(wm8350, WM8350_OVER_CURRENT_INT_STATUS);
-		oc &= ~wm8350_reg_read(wm8350,
-				       WM8350_OVER_CURRENT_INT_STATUS_MASK);
-
-		if (oc & WM8350_OC_LS_EINT)	/* limit switch */
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_OC_LS);
-	}
-
-	/* under voltage */
-	if (level_one & WM8350_UV_INT) {
-		u16 uv;
-
-		uv = wm8350_reg_read(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS);
-		uv &= ~wm8350_reg_read(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK);
-
-		if (uv & WM8350_UV_DC1_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC1);
-		if (uv & WM8350_UV_DC2_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC2);
-		if (uv & WM8350_UV_DC3_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC3);
-		if (uv & WM8350_UV_DC4_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC4);
-		if (uv & WM8350_UV_DC5_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC5);
-		if (uv & WM8350_UV_DC6_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_DC6);
-		if (uv & WM8350_UV_LDO1_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO1);
-		if (uv & WM8350_UV_LDO2_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO2);
-		if (uv & WM8350_UV_LDO3_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO3);
-		if (uv & WM8350_UV_LDO4_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_UV_LDO4);
-	}
-
-	/* charger, RTC */
-	if (status1) {
-		if (status1 & WM8350_CHG_BAT_HOT_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CHG_BAT_HOT);
-		if (status1 & WM8350_CHG_BAT_COLD_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CHG_BAT_COLD);
-		if (status1 & WM8350_CHG_BAT_FAIL_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CHG_BAT_FAIL);
-		if (status1 & WM8350_CHG_TO_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_CHG_TO);
-		if (status1 & WM8350_CHG_END_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_CHG_END);
-		if (status1 & WM8350_CHG_START_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_CHG_START);
-		if (status1 & WM8350_CHG_FAST_RDY_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CHG_FAST_RDY);
-		if (status1 & WM8350_CHG_VBATT_LT_3P9_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CHG_VBATT_LT_3P9);
-		if (status1 & WM8350_CHG_VBATT_LT_3P1_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CHG_VBATT_LT_3P1);
-		if (status1 & WM8350_CHG_VBATT_LT_2P85_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CHG_VBATT_LT_2P85);
-		if (status1 & WM8350_RTC_ALM_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_RTC_ALM);
-		if (status1 & WM8350_RTC_SEC_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_RTC_SEC);
-		if (status1 & WM8350_RTC_PER_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_RTC_PER);
-	}
-
-	/* current sink, system, aux adc */
-	if (status2) {
-		if (status2 & WM8350_CS1_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_CS1);
-		if (status2 & WM8350_CS2_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_CS2);
-
-		if (status2 & WM8350_SYS_HYST_COMP_FAIL_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_SYS_HYST_COMP_FAIL);
-		if (status2 & WM8350_SYS_CHIP_GT115_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_SYS_CHIP_GT115);
-		if (status2 & WM8350_SYS_CHIP_GT140_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_SYS_CHIP_GT140);
-		if (status2 & WM8350_SYS_WDOG_TO_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_SYS_WDOG_TO);
-
-		if (status2 & WM8350_AUXADC_DATARDY_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_AUXADC_DATARDY);
-		if (status2 & WM8350_AUXADC_DCOMP4_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_AUXADC_DCOMP4);
-		if (status2 & WM8350_AUXADC_DCOMP3_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_AUXADC_DCOMP3);
-		if (status2 & WM8350_AUXADC_DCOMP2_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_AUXADC_DCOMP2);
-		if (status2 & WM8350_AUXADC_DCOMP1_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_AUXADC_DCOMP1);
-
-		if (status2 & WM8350_USB_LIMIT_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_USB_LIMIT);
-	}
-
-	/* wake, codec, ext */
-	if (comp) {
-		if (comp & WM8350_WKUP_OFF_STATE_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_WKUP_OFF_STATE);
-		if (comp & WM8350_WKUP_HIB_STATE_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_WKUP_HIB_STATE);
-		if (comp & WM8350_WKUP_CONV_FAULT_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_WKUP_CONV_FAULT);
-		if (comp & WM8350_WKUP_WDOG_RST_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_WKUP_WDOG_RST);
-		if (comp & WM8350_WKUP_GP_PWR_ON_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_WKUP_GP_PWR_ON);
-		if (comp & WM8350_WKUP_ONKEY_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_WKUP_ONKEY);
-		if (comp & WM8350_WKUP_GP_WAKEUP_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_WKUP_GP_WAKEUP);
-
-		if (comp & WM8350_CODEC_JCK_DET_L_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CODEC_JCK_DET_L);
-		if (comp & WM8350_CODEC_JCK_DET_R_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CODEC_JCK_DET_R);
-		if (comp & WM8350_CODEC_MICSCD_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_CODEC_MICSCD);
-		if (comp & WM8350_CODEC_MICD_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_CODEC_MICD);
-
-		if (comp & WM8350_EXT_USB_FB_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_EXT_USB_FB);
-		if (comp & WM8350_EXT_WALL_FB_EINT)
-			wm8350_irq_call_handler(wm8350,
-						WM8350_IRQ_EXT_WALL_FB);
-		if (comp & WM8350_EXT_BAT_FB_EINT)
-			wm8350_irq_call_handler(wm8350, WM8350_IRQ_EXT_BAT_FB);
-	}
-
-	if (level_one & WM8350_GP_INT) {
-		int i;
-		u16 gpio;
-
-		gpio = wm8350_reg_read(wm8350, WM8350_GPIO_INT_STATUS);
-		gpio &= ~wm8350_reg_read(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK);
-
-		for (i = 0; i < 12; i++) {
-			if (gpio & (1 << i))
-				wm8350_irq_call_handler(wm8350,
-							WM8350_IRQ_GPIO(i));
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-int wm8350_register_irq(struct wm8350 *wm8350, int irq,
-			void (*handler) (struct wm8350 *, int, void *),
-			void *data)
-{
-	if (irq < 0 || irq > WM8350_NUM_IRQ || !handler)
-		return -EINVAL;
-
-	if (wm8350->irq[irq].handler)
-		return -EBUSY;
-
-	mutex_lock(&wm8350->irq_mutex);
-	wm8350->irq[irq].handler = handler;
-	wm8350->irq[irq].data = data;
-	mutex_unlock(&wm8350->irq_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(wm8350_register_irq);
-
-int wm8350_free_irq(struct wm8350 *wm8350, int irq)
-{
-	if (irq < 0 || irq > WM8350_NUM_IRQ)
-		return -EINVAL;
-
-	mutex_lock(&wm8350->irq_mutex);
-	wm8350->irq[irq].handler = NULL;
-	mutex_unlock(&wm8350->irq_mutex);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(wm8350_free_irq);
-
-int wm8350_mask_irq(struct wm8350 *wm8350, int irq)
-{
-	switch (irq) {
-	case WM8350_IRQ_CHG_BAT_HOT:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_BAT_HOT_EINT);
-	case WM8350_IRQ_CHG_BAT_COLD:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_BAT_COLD_EINT);
-	case WM8350_IRQ_CHG_BAT_FAIL:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_BAT_FAIL_EINT);
-	case WM8350_IRQ_CHG_TO:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_TO_EINT);
-	case WM8350_IRQ_CHG_END:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_END_EINT);
-	case WM8350_IRQ_CHG_START:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_START_EINT);
-	case WM8350_IRQ_CHG_FAST_RDY:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_FAST_RDY_EINT);
-	case WM8350_IRQ_RTC_PER:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_RTC_PER_EINT);
-	case WM8350_IRQ_RTC_SEC:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_RTC_SEC_EINT);
-	case WM8350_IRQ_RTC_ALM:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_RTC_ALM_EINT);
-	case WM8350_IRQ_CHG_VBATT_LT_3P9:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_VBATT_LT_3P9_EINT);
-	case WM8350_IRQ_CHG_VBATT_LT_3P1:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_VBATT_LT_3P1_EINT);
-	case WM8350_IRQ_CHG_VBATT_LT_2P85:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-				       WM8350_IM_CHG_VBATT_LT_2P85_EINT);
-	case WM8350_IRQ_CS1:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_CS1_EINT);
-	case WM8350_IRQ_CS2:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_CS2_EINT);
-	case WM8350_IRQ_USB_LIMIT:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_USB_LIMIT_EINT);
-	case WM8350_IRQ_AUXADC_DATARDY:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_AUXADC_DATARDY_EINT);
-	case WM8350_IRQ_AUXADC_DCOMP4:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_AUXADC_DCOMP4_EINT);
-	case WM8350_IRQ_AUXADC_DCOMP3:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_AUXADC_DCOMP3_EINT);
-	case WM8350_IRQ_AUXADC_DCOMP2:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_AUXADC_DCOMP2_EINT);
-	case WM8350_IRQ_AUXADC_DCOMP1:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_AUXADC_DCOMP1_EINT);
-	case WM8350_IRQ_SYS_HYST_COMP_FAIL:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_SYS_HYST_COMP_FAIL_EINT);
-	case WM8350_IRQ_SYS_CHIP_GT115:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_SYS_CHIP_GT115_EINT);
-	case WM8350_IRQ_SYS_CHIP_GT140:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_SYS_CHIP_GT140_EINT);
-	case WM8350_IRQ_SYS_WDOG_TO:
-		return wm8350_set_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-				       WM8350_IM_SYS_WDOG_TO_EINT);
-	case WM8350_IRQ_UV_LDO4:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_LDO4_EINT);
-	case WM8350_IRQ_UV_LDO3:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_LDO3_EINT);
-	case WM8350_IRQ_UV_LDO2:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_LDO2_EINT);
-	case WM8350_IRQ_UV_LDO1:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_LDO1_EINT);
-	case WM8350_IRQ_UV_DC6:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_DC6_EINT);
-	case WM8350_IRQ_UV_DC5:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_DC5_EINT);
-	case WM8350_IRQ_UV_DC4:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_DC4_EINT);
-	case WM8350_IRQ_UV_DC3:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_DC3_EINT);
-	case WM8350_IRQ_UV_DC2:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_DC2_EINT);
-	case WM8350_IRQ_UV_DC1:
-		return wm8350_set_bits(wm8350,
-				       WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-				       WM8350_IM_UV_DC1_EINT);
-	case WM8350_IRQ_OC_LS:
-		return wm8350_set_bits(wm8350,
-				       WM8350_OVER_CURRENT_INT_STATUS_MASK,
-				       WM8350_IM_OC_LS_EINT);
-	case WM8350_IRQ_EXT_USB_FB:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_EXT_USB_FB_EINT);
-	case WM8350_IRQ_EXT_WALL_FB:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_EXT_WALL_FB_EINT);
-	case WM8350_IRQ_EXT_BAT_FB:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_EXT_BAT_FB_EINT);
-	case WM8350_IRQ_CODEC_JCK_DET_L:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_CODEC_JCK_DET_L_EINT);
-	case WM8350_IRQ_CODEC_JCK_DET_R:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_CODEC_JCK_DET_R_EINT);
-	case WM8350_IRQ_CODEC_MICSCD:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_CODEC_MICSCD_EINT);
-	case WM8350_IRQ_CODEC_MICD:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_CODEC_MICD_EINT);
-	case WM8350_IRQ_WKUP_OFF_STATE:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_WKUP_OFF_STATE_EINT);
-	case WM8350_IRQ_WKUP_HIB_STATE:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_WKUP_HIB_STATE_EINT);
-	case WM8350_IRQ_WKUP_CONV_FAULT:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_WKUP_CONV_FAULT_EINT);
-	case WM8350_IRQ_WKUP_WDOG_RST:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_WKUP_OFF_STATE_EINT);
-	case WM8350_IRQ_WKUP_GP_PWR_ON:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_WKUP_GP_PWR_ON_EINT);
-	case WM8350_IRQ_WKUP_ONKEY:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_WKUP_ONKEY_EINT);
-	case WM8350_IRQ_WKUP_GP_WAKEUP:
-		return wm8350_set_bits(wm8350,
-				       WM8350_COMPARATOR_INT_STATUS_MASK,
-				       WM8350_IM_WKUP_GP_WAKEUP_EINT);
-	case WM8350_IRQ_GPIO(0):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP0_EINT);
-	case WM8350_IRQ_GPIO(1):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP1_EINT);
-	case WM8350_IRQ_GPIO(2):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP2_EINT);
-	case WM8350_IRQ_GPIO(3):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP3_EINT);
-	case WM8350_IRQ_GPIO(4):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP4_EINT);
-	case WM8350_IRQ_GPIO(5):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP5_EINT);
-	case WM8350_IRQ_GPIO(6):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP6_EINT);
-	case WM8350_IRQ_GPIO(7):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP7_EINT);
-	case WM8350_IRQ_GPIO(8):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP8_EINT);
-	case WM8350_IRQ_GPIO(9):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP9_EINT);
-	case WM8350_IRQ_GPIO(10):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP10_EINT);
-	case WM8350_IRQ_GPIO(11):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP11_EINT);
-	case WM8350_IRQ_GPIO(12):
-		return wm8350_set_bits(wm8350,
-				       WM8350_GPIO_INT_STATUS_MASK,
-				       WM8350_IM_GP12_EINT);
-	default:
-		dev_warn(wm8350->dev, "Attempting to mask unknown IRQ %d\n",
-			 irq);
-		return -EINVAL;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(wm8350_mask_irq);
-
-int wm8350_unmask_irq(struct wm8350 *wm8350, int irq)
-{
-	switch (irq) {
-	case WM8350_IRQ_CHG_BAT_HOT:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_BAT_HOT_EINT);
-	case WM8350_IRQ_CHG_BAT_COLD:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_BAT_COLD_EINT);
-	case WM8350_IRQ_CHG_BAT_FAIL:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_BAT_FAIL_EINT);
-	case WM8350_IRQ_CHG_TO:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_TO_EINT);
-	case WM8350_IRQ_CHG_END:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_END_EINT);
-	case WM8350_IRQ_CHG_START:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_START_EINT);
-	case WM8350_IRQ_CHG_FAST_RDY:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_FAST_RDY_EINT);
-	case WM8350_IRQ_RTC_PER:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_RTC_PER_EINT);
-	case WM8350_IRQ_RTC_SEC:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_RTC_SEC_EINT);
-	case WM8350_IRQ_RTC_ALM:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_RTC_ALM_EINT);
-	case WM8350_IRQ_CHG_VBATT_LT_3P9:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_VBATT_LT_3P9_EINT);
-	case WM8350_IRQ_CHG_VBATT_LT_3P1:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_VBATT_LT_3P1_EINT);
-	case WM8350_IRQ_CHG_VBATT_LT_2P85:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK,
-					 WM8350_IM_CHG_VBATT_LT_2P85_EINT);
-	case WM8350_IRQ_CS1:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_CS1_EINT);
-	case WM8350_IRQ_CS2:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_CS2_EINT);
-	case WM8350_IRQ_USB_LIMIT:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_USB_LIMIT_EINT);
-	case WM8350_IRQ_AUXADC_DATARDY:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_AUXADC_DATARDY_EINT);
-	case WM8350_IRQ_AUXADC_DCOMP4:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_AUXADC_DCOMP4_EINT);
-	case WM8350_IRQ_AUXADC_DCOMP3:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_AUXADC_DCOMP3_EINT);
-	case WM8350_IRQ_AUXADC_DCOMP2:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_AUXADC_DCOMP2_EINT);
-	case WM8350_IRQ_AUXADC_DCOMP1:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_AUXADC_DCOMP1_EINT);
-	case WM8350_IRQ_SYS_HYST_COMP_FAIL:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_SYS_HYST_COMP_FAIL_EINT);
-	case WM8350_IRQ_SYS_CHIP_GT115:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_SYS_CHIP_GT115_EINT);
-	case WM8350_IRQ_SYS_CHIP_GT140:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_SYS_CHIP_GT140_EINT);
-	case WM8350_IRQ_SYS_WDOG_TO:
-		return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_2_MASK,
-					 WM8350_IM_SYS_WDOG_TO_EINT);
-	case WM8350_IRQ_UV_LDO4:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_LDO4_EINT);
-	case WM8350_IRQ_UV_LDO3:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_LDO3_EINT);
-	case WM8350_IRQ_UV_LDO2:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_LDO2_EINT);
-	case WM8350_IRQ_UV_LDO1:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_LDO1_EINT);
-	case WM8350_IRQ_UV_DC6:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_DC6_EINT);
-	case WM8350_IRQ_UV_DC5:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_DC5_EINT);
-	case WM8350_IRQ_UV_DC4:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_DC4_EINT);
-	case WM8350_IRQ_UV_DC3:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_DC3_EINT);
-	case WM8350_IRQ_UV_DC2:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_DC2_EINT);
-	case WM8350_IRQ_UV_DC1:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_UNDER_VOLTAGE_INT_STATUS_MASK,
-					 WM8350_IM_UV_DC1_EINT);
-	case WM8350_IRQ_OC_LS:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_OVER_CURRENT_INT_STATUS_MASK,
-					 WM8350_IM_OC_LS_EINT);
-	case WM8350_IRQ_EXT_USB_FB:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_EXT_USB_FB_EINT);
-	case WM8350_IRQ_EXT_WALL_FB:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_EXT_WALL_FB_EINT);
-	case WM8350_IRQ_EXT_BAT_FB:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_EXT_BAT_FB_EINT);
-	case WM8350_IRQ_CODEC_JCK_DET_L:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_CODEC_JCK_DET_L_EINT);
-	case WM8350_IRQ_CODEC_JCK_DET_R:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_CODEC_JCK_DET_R_EINT);
-	case WM8350_IRQ_CODEC_MICSCD:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_CODEC_MICSCD_EINT);
-	case WM8350_IRQ_CODEC_MICD:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_CODEC_MICD_EINT);
-	case WM8350_IRQ_WKUP_OFF_STATE:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_WKUP_OFF_STATE_EINT);
-	case WM8350_IRQ_WKUP_HIB_STATE:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_WKUP_HIB_STATE_EINT);
-	case WM8350_IRQ_WKUP_CONV_FAULT:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_WKUP_CONV_FAULT_EINT);
-	case WM8350_IRQ_WKUP_WDOG_RST:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_WKUP_OFF_STATE_EINT);
-	case WM8350_IRQ_WKUP_GP_PWR_ON:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_WKUP_GP_PWR_ON_EINT);
-	case WM8350_IRQ_WKUP_ONKEY:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_WKUP_ONKEY_EINT);
-	case WM8350_IRQ_WKUP_GP_WAKEUP:
-		return wm8350_clear_bits(wm8350,
-					 WM8350_COMPARATOR_INT_STATUS_MASK,
-					 WM8350_IM_WKUP_GP_WAKEUP_EINT);
-	case WM8350_IRQ_GPIO(0):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP0_EINT);
-	case WM8350_IRQ_GPIO(1):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP1_EINT);
-	case WM8350_IRQ_GPIO(2):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP2_EINT);
-	case WM8350_IRQ_GPIO(3):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP3_EINT);
-	case WM8350_IRQ_GPIO(4):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP4_EINT);
-	case WM8350_IRQ_GPIO(5):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP5_EINT);
-	case WM8350_IRQ_GPIO(6):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP6_EINT);
-	case WM8350_IRQ_GPIO(7):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP7_EINT);
-	case WM8350_IRQ_GPIO(8):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP8_EINT);
-	case WM8350_IRQ_GPIO(9):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP9_EINT);
-	case WM8350_IRQ_GPIO(10):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP10_EINT);
-	case WM8350_IRQ_GPIO(11):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP11_EINT);
-	case WM8350_IRQ_GPIO(12):
-		return wm8350_clear_bits(wm8350,
-					 WM8350_GPIO_INT_STATUS_MASK,
-					 WM8350_IM_GP12_EINT);
-	default:
-		dev_warn(wm8350->dev, "Attempting to unmask unknown IRQ %d\n",
-			 irq);
-		return -EINVAL;
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(wm8350_unmask_irq);
-
 int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
 {
 	u16 reg, result = 0;
@@ -1264,7 +537,7 @@ static void wm8350_client_dev_register(struct wm8350 *wm8350,
 	int ret;
 
 	*pdev = platform_device_alloc(name, -1);
-	if (pdev == NULL) {
+	if (*pdev == NULL) {
 		dev_err(wm8350->dev, "Failed to allocate %s\n", name);
 		return;
 	}
@@ -1409,49 +682,18 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		return ret;
 	}
 
-	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
-
 	mutex_init(&wm8350->auxadc_mutex);
-	mutex_init(&wm8350->irq_mutex);
-	if (irq) {
-		int flags = IRQF_ONESHOT;
-
-		if (pdata && pdata->irq_high) {
-			flags |= IRQF_TRIGGER_HIGH;
-
-			wm8350_set_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
-					WM8350_IRQ_POL);
-		} else {
-			flags |= IRQF_TRIGGER_LOW;
-
-			wm8350_clear_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
-					  WM8350_IRQ_POL);
-		}
 
-		ret = request_threaded_irq(irq, NULL, wm8350_irq, flags,
-					   "wm8350", wm8350);
-		if (ret != 0) {
-			dev_err(wm8350->dev, "Failed to request IRQ: %d\n",
-				ret);
-			goto err;
-		}
-	} else {
-		dev_err(wm8350->dev, "No IRQ configured\n");
+	ret = wm8350_irq_init(wm8350, irq, pdata);
+	if (ret < 0)
 		goto err;
-	}
-	wm8350->chip_irq = irq;
 
 	if (pdata && pdata->init) {
 		ret = pdata->init(wm8350);
 		if (ret != 0) {
 			dev_err(wm8350->dev, "Platform init() failed: %d\n",
 				ret);
-			goto err;
+			goto err_irq;
 		}
 	}
 
@@ -1470,6 +712,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 
 	return 0;
 
+err_irq:
+	wm8350_irq_exit(wm8350);
 err:
 	kfree(wm8350->reg_cache);
 	return ret;
@@ -1493,7 +737,8 @@ void wm8350_device_exit(struct wm8350 *wm8350)
 	platform_device_unregister(wm8350->gpio.pdev);
 	platform_device_unregister(wm8350->codec.pdev);
 
-	free_irq(wm8350->chip_irq, wm8350);
+	wm8350_irq_exit(wm8350);
+
 	kfree(wm8350->reg_cache);
 }
 EXPORT_SYMBOL_GPL(wm8350_device_exit);
diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c
new file mode 100644
index 000000000000..c8df547c4747
--- /dev/null
+++ b/drivers/mfd/wm8350-irq.c
@@ -0,0 +1,529 @@
+/*
+ * wm8350-irq.c  --  IRQ support for Wolfson WM8350
+ *
+ * Copyright 2007, 2008, 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood, Mark Brown
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/comparator.h>
+#include <linux/mfd/wm8350/gpio.h>
+#include <linux/mfd/wm8350/pmic.h>
+#include <linux/mfd/wm8350/rtc.h>
+#include <linux/mfd/wm8350/supply.h>
+#include <linux/mfd/wm8350/wdt.h>
+
+#define WM8350_NUM_IRQ_REGS 7
+
+#define WM8350_INT_OFFSET_1                     0
+#define WM8350_INT_OFFSET_2                     1
+#define WM8350_POWER_UP_INT_OFFSET              2
+#define WM8350_UNDER_VOLTAGE_INT_OFFSET         3
+#define WM8350_OVER_CURRENT_INT_OFFSET          4
+#define WM8350_GPIO_INT_OFFSET                  5
+#define WM8350_COMPARATOR_INT_OFFSET            6
+
+struct wm8350_irq_data {
+	int primary;
+	int reg;
+	int mask;
+	int primary_only;
+};
+
+static struct wm8350_irq_data wm8350_irqs[] = {
+	[WM8350_IRQ_OC_LS] = {
+		.primary = WM8350_OC_INT,
+		.reg = WM8350_OVER_CURRENT_INT_OFFSET,
+		.mask = WM8350_OC_LS_EINT,
+		.primary_only = 1,
+	},
+	[WM8350_IRQ_UV_DC1] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_DC1_EINT,
+	},
+	[WM8350_IRQ_UV_DC2] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_DC2_EINT,
+	},
+	[WM8350_IRQ_UV_DC3] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_DC3_EINT,
+	},
+	[WM8350_IRQ_UV_DC4] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_DC4_EINT,
+	},
+	[WM8350_IRQ_UV_DC5] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_DC5_EINT,
+	},
+	[WM8350_IRQ_UV_DC6] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_DC6_EINT,
+	},
+	[WM8350_IRQ_UV_LDO1] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_LDO1_EINT,
+	},
+	[WM8350_IRQ_UV_LDO2] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_LDO2_EINT,
+	},
+	[WM8350_IRQ_UV_LDO3] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_LDO3_EINT,
+	},
+	[WM8350_IRQ_UV_LDO4] = {
+		.primary = WM8350_UV_INT,
+		.reg = WM8350_UNDER_VOLTAGE_INT_OFFSET,
+		.mask = WM8350_UV_LDO4_EINT,
+	},
+	[WM8350_IRQ_CHG_BAT_HOT] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_BAT_HOT_EINT,
+	},
+	[WM8350_IRQ_CHG_BAT_COLD] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_BAT_COLD_EINT,
+	},
+	[WM8350_IRQ_CHG_BAT_FAIL] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_BAT_FAIL_EINT,
+	},
+	[WM8350_IRQ_CHG_TO] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_TO_EINT,
+	},
+	[WM8350_IRQ_CHG_END] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_END_EINT,
+	},
+	[WM8350_IRQ_CHG_START] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_START_EINT,
+	},
+	[WM8350_IRQ_CHG_FAST_RDY] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_FAST_RDY_EINT,
+	},
+	[WM8350_IRQ_CHG_VBATT_LT_3P9] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_VBATT_LT_3P9_EINT,
+	},
+	[WM8350_IRQ_CHG_VBATT_LT_3P1] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_VBATT_LT_3P1_EINT,
+	},
+	[WM8350_IRQ_CHG_VBATT_LT_2P85] = {
+		.primary = WM8350_CHG_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_CHG_VBATT_LT_2P85_EINT,
+	},
+	[WM8350_IRQ_RTC_ALM] = {
+		.primary = WM8350_RTC_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_RTC_ALM_EINT,
+	},
+	[WM8350_IRQ_RTC_SEC] = {
+		.primary = WM8350_RTC_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_RTC_SEC_EINT,
+	},
+	[WM8350_IRQ_RTC_PER] = {
+		.primary = WM8350_RTC_INT,
+		.reg = WM8350_INT_OFFSET_1,
+		.mask = WM8350_RTC_PER_EINT,
+	},
+	[WM8350_IRQ_CS1] = {
+		.primary = WM8350_CS_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_CS1_EINT,
+	},
+	[WM8350_IRQ_CS2] = {
+		.primary = WM8350_CS_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_CS2_EINT,
+	},
+	[WM8350_IRQ_SYS_HYST_COMP_FAIL] = {
+		.primary = WM8350_SYS_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_SYS_HYST_COMP_FAIL_EINT,
+	},
+	[WM8350_IRQ_SYS_CHIP_GT115] = {
+		.primary = WM8350_SYS_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_SYS_CHIP_GT115_EINT,
+	},
+	[WM8350_IRQ_SYS_CHIP_GT140] = {
+		.primary = WM8350_SYS_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_SYS_CHIP_GT140_EINT,
+	},
+	[WM8350_IRQ_SYS_WDOG_TO] = {
+		.primary = WM8350_SYS_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_SYS_WDOG_TO_EINT,
+	},
+	[WM8350_IRQ_AUXADC_DATARDY] = {
+		.primary = WM8350_AUXADC_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_AUXADC_DATARDY_EINT,
+	},
+	[WM8350_IRQ_AUXADC_DCOMP4] = {
+		.primary = WM8350_AUXADC_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_AUXADC_DCOMP4_EINT,
+	},
+	[WM8350_IRQ_AUXADC_DCOMP3] = {
+		.primary = WM8350_AUXADC_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_AUXADC_DCOMP3_EINT,
+	},
+	[WM8350_IRQ_AUXADC_DCOMP2] = {
+		.primary = WM8350_AUXADC_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_AUXADC_DCOMP2_EINT,
+	},
+	[WM8350_IRQ_AUXADC_DCOMP1] = {
+		.primary = WM8350_AUXADC_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_AUXADC_DCOMP1_EINT,
+	},
+	[WM8350_IRQ_USB_LIMIT] = {
+		.primary = WM8350_USB_INT,
+		.reg = WM8350_INT_OFFSET_2,
+		.mask = WM8350_USB_LIMIT_EINT,
+		.primary_only = 1,
+	},
+	[WM8350_IRQ_WKUP_OFF_STATE] = {
+		.primary = WM8350_WKUP_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_WKUP_OFF_STATE_EINT,
+	},
+	[WM8350_IRQ_WKUP_HIB_STATE] = {
+		.primary = WM8350_WKUP_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_WKUP_HIB_STATE_EINT,
+	},
+	[WM8350_IRQ_WKUP_CONV_FAULT] = {
+		.primary = WM8350_WKUP_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_WKUP_CONV_FAULT_EINT,
+	},
+	[WM8350_IRQ_WKUP_WDOG_RST] = {
+		.primary = WM8350_WKUP_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_WKUP_WDOG_RST_EINT,
+	},
+	[WM8350_IRQ_WKUP_GP_PWR_ON] = {
+		.primary = WM8350_WKUP_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_WKUP_GP_PWR_ON_EINT,
+	},
+	[WM8350_IRQ_WKUP_ONKEY] = {
+		.primary = WM8350_WKUP_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_WKUP_ONKEY_EINT,
+	},
+	[WM8350_IRQ_WKUP_GP_WAKEUP] = {
+		.primary = WM8350_WKUP_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_WKUP_GP_WAKEUP_EINT,
+	},
+	[WM8350_IRQ_CODEC_JCK_DET_L] = {
+		.primary = WM8350_CODEC_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_CODEC_JCK_DET_L_EINT,
+	},
+	[WM8350_IRQ_CODEC_JCK_DET_R] = {
+		.primary = WM8350_CODEC_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_CODEC_JCK_DET_R_EINT,
+	},
+	[WM8350_IRQ_CODEC_MICSCD] = {
+		.primary = WM8350_CODEC_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_CODEC_MICSCD_EINT,
+	},
+	[WM8350_IRQ_CODEC_MICD] = {
+		.primary = WM8350_CODEC_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_CODEC_MICD_EINT,
+	},
+	[WM8350_IRQ_EXT_USB_FB] = {
+		.primary = WM8350_EXT_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_EXT_USB_FB_EINT,
+	},
+	[WM8350_IRQ_EXT_WALL_FB] = {
+		.primary = WM8350_EXT_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_EXT_WALL_FB_EINT,
+	},
+	[WM8350_IRQ_EXT_BAT_FB] = {
+		.primary = WM8350_EXT_INT,
+		.reg = WM8350_COMPARATOR_INT_OFFSET,
+		.mask = WM8350_EXT_BAT_FB_EINT,
+	},
+	[WM8350_IRQ_GPIO(0)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP0_EINT,
+	},
+	[WM8350_IRQ_GPIO(1)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP1_EINT,
+	},
+	[WM8350_IRQ_GPIO(2)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP2_EINT,
+	},
+	[WM8350_IRQ_GPIO(3)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP3_EINT,
+	},
+	[WM8350_IRQ_GPIO(4)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP4_EINT,
+	},
+	[WM8350_IRQ_GPIO(5)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP5_EINT,
+	},
+	[WM8350_IRQ_GPIO(6)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP6_EINT,
+	},
+	[WM8350_IRQ_GPIO(7)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP7_EINT,
+	},
+	[WM8350_IRQ_GPIO(8)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP8_EINT,
+	},
+	[WM8350_IRQ_GPIO(9)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP9_EINT,
+	},
+	[WM8350_IRQ_GPIO(10)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP10_EINT,
+	},
+	[WM8350_IRQ_GPIO(11)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP11_EINT,
+	},
+	[WM8350_IRQ_GPIO(12)] = {
+		.primary = WM8350_GP_INT,
+		.reg = WM8350_GPIO_INT_OFFSET,
+		.mask = WM8350_GP12_EINT,
+	},
+};
+
+static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq)
+{
+	mutex_lock(&wm8350->irq_mutex);
+
+	if (wm8350->irq[irq].handler)
+		wm8350->irq[irq].handler(irq, wm8350->irq[irq].data);
+	else {
+		dev_err(wm8350->dev, "irq %d nobody cared. now masked.\n",
+			irq);
+		wm8350_mask_irq(wm8350, irq);
+	}
+
+	mutex_unlock(&wm8350->irq_mutex);
+}
+
+/*
+ * This is a threaded IRQ handler so can access I2C/SPI.  Since all
+ * interrupts are clear on read the IRQ line will be reasserted and
+ * the physical IRQ will be handled again if another interrupt is
+ * asserted while we run - in the normal course of events this is a
+ * rare occurrence so we save I2C/SPI reads.
+ */
+static irqreturn_t wm8350_irq(int irq, void *irq_data)
+{
+	struct wm8350 *wm8350 = irq_data;
+	u16 level_one;
+	u16 sub_reg[WM8350_NUM_IRQ_REGS];
+	int read_done[WM8350_NUM_IRQ_REGS];
+	struct wm8350_irq_data *data;
+	int i;
+
+	/* TODO: Use block reads to improve performance? */
+	level_one = wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS)
+		& ~wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK);
+
+	if (!level_one)
+		return IRQ_NONE;
+
+	memset(&read_done, 0, sizeof(read_done));
+
+	for (i = 0; i < ARRAY_SIZE(wm8350_irqs); i++) {
+		data = &wm8350_irqs[i];
+
+		if (!(level_one & data->primary))
+			continue;
+
+		if (!read_done[data->reg]) {
+			sub_reg[data->reg] =
+				wm8350_reg_read(wm8350, WM8350_INT_STATUS_1 +
+						data->reg);
+			sub_reg[data->reg] &=
+				~wm8350_reg_read(wm8350,
+						 WM8350_INT_STATUS_1_MASK +
+						 data->reg);
+			read_done[data->reg] = 1;
+		}
+
+		if (sub_reg[data->reg] & data->mask)
+			wm8350_irq_call_handler(wm8350, i);
+	}
+
+	return IRQ_HANDLED;
+}
+
+int wm8350_register_irq(struct wm8350 *wm8350, int irq,
+			irq_handler_t handler, unsigned long flags,
+			const char *name, void *data)
+{
+	if (irq < 0 || irq > WM8350_NUM_IRQ || !handler)
+		return -EINVAL;
+
+	if (wm8350->irq[irq].handler)
+		return -EBUSY;
+
+	mutex_lock(&wm8350->irq_mutex);
+	wm8350->irq[irq].handler = handler;
+	wm8350->irq[irq].data = data;
+	mutex_unlock(&wm8350->irq_mutex);
+
+	wm8350_unmask_irq(wm8350, irq);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wm8350_register_irq);
+
+int wm8350_free_irq(struct wm8350 *wm8350, int irq)
+{
+	if (irq < 0 || irq > WM8350_NUM_IRQ)
+		return -EINVAL;
+
+	wm8350_mask_irq(wm8350, irq);
+
+	mutex_lock(&wm8350->irq_mutex);
+	wm8350->irq[irq].handler = NULL;
+	mutex_unlock(&wm8350->irq_mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wm8350_free_irq);
+
+int wm8350_mask_irq(struct wm8350 *wm8350, int irq)
+{
+	return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK +
+			       wm8350_irqs[irq].reg,
+			       wm8350_irqs[irq].mask);
+}
+EXPORT_SYMBOL_GPL(wm8350_mask_irq);
+
+int wm8350_unmask_irq(struct wm8350 *wm8350, int irq)
+{
+	return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK +
+				 wm8350_irqs[irq].reg,
+				 wm8350_irqs[irq].mask);
+}
+EXPORT_SYMBOL_GPL(wm8350_unmask_irq);
+
+int wm8350_irq_init(struct wm8350 *wm8350, int irq,
+		    struct wm8350_platform_data *pdata)
+{
+	int ret;
+	int flags = IRQF_ONESHOT;
+
+	if (!irq) {
+		dev_err(wm8350->dev, "No IRQ configured\n");
+		return -EINVAL;
+	}
+
+	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
+	wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
+
+	mutex_init(&wm8350->irq_mutex);
+	wm8350->chip_irq = irq;
+
+	if (pdata && pdata->irq_high) {
+		flags |= IRQF_TRIGGER_HIGH;
+
+		wm8350_set_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
+				WM8350_IRQ_POL);
+	} else {
+		flags |= IRQF_TRIGGER_LOW;
+
+		wm8350_clear_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
+				  WM8350_IRQ_POL);
+	}
+
+	ret = request_threaded_irq(irq, NULL, wm8350_irq, flags,
+				   "wm8350", wm8350);
+	if (ret != 0)
+		dev_err(wm8350->dev, "Failed to request IRQ: %d\n", ret);
+
+	return ret;
+}
+
+int wm8350_irq_exit(struct wm8350 *wm8350)
+{
+	free_irq(wm8350->chip_irq, wm8350);
+	return 0;
+}
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index 7ccc1eab98ab..e965139e5cd5 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -3170,14 +3170,6 @@ const u16 wm8352_mode3_defaults[] = {
 };
 #endif
 
-/* The register defaults for the config mode used must be compiled in but
- * due to the impact on kernel size it is possible to disable
- */
-#ifndef WM8350_HAVE_CONFIG_MODE
-#warning No WM8350 config modes supported - select at least one of the
-#warning MFD_WM8350_CONFIG_MODE_n options from the board driver.
-#endif
-
 /*
  * Access masks.
  */
diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
index e8b278f71781..6a84a8eb8d7a 100644
--- a/drivers/power/pcf50633-charger.c
+++ b/drivers/power/pcf50633-charger.c
@@ -303,7 +303,6 @@ static const u8 mbc_irq_handlers[] = {
 static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
 {
 	struct pcf50633_mbc *mbc;
-	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
 	int ret;
 	int i;
 	u8 mbcs1;
@@ -313,7 +312,7 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, mbc);
-	mbc->pcf = pdata->pcf;
+	mbc->pcf = dev_to_pcf50633(pdev->dev.parent);
 
 	/* Set up IRQ handlers */
 	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c
index 28b0299c0043..ad4f071e1287 100644
--- a/drivers/power/wm8350_power.c
+++ b/drivers/power/wm8350_power.c
@@ -184,8 +184,9 @@ static ssize_t charger_state_show(struct device *dev,
 
 static DEVICE_ATTR(charger_state, 0444, charger_state_show, NULL);
 
-static void wm8350_charger_handler(struct wm8350 *wm8350, int irq, void *data)
+static irqreturn_t wm8350_charger_handler(int irq, void *data)
 {
+	struct wm8350 *wm8350 = data;
 	struct wm8350_power *power = &wm8350->power;
 	struct wm8350_charger_policy *policy = power->policy;
 
@@ -238,6 +239,8 @@ static void wm8350_charger_handler(struct wm8350 *wm8350, int irq, void *data)
 	default:
 		dev_err(wm8350->dev, "Unknown interrupt %d\n", irq);
 	}
+
+	return IRQ_HANDLED;
 }
 
 /*********************************************************************
@@ -387,73 +390,55 @@ static void wm8350_init_charger(struct wm8350 *wm8350)
 {
 	/* register our interest in charger events */
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT);
+			    wm8350_charger_handler, 0, "Battery hot", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD);
+			    wm8350_charger_handler, 0, "Battery cold", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL);
+			    wm8350_charger_handler, 0, "Battery fail", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_TO);
+			    wm8350_charger_handler, 0,
+			    "Charger timeout", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_END);
+			    wm8350_charger_handler, 0,
+			    "Charge end", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_START);
+			    wm8350_charger_handler, 0,
+			    "Charge start", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY);
+			    wm8350_charger_handler, 0,
+			    "Fast charge ready", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9);
+			    wm8350_charger_handler, 0,
+			    "Battery <3.9V", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1);
+			    wm8350_charger_handler, 0,
+			    "Battery <3.1V", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85);
+			    wm8350_charger_handler, 0,
+			    "Battery <2.85V", wm8350);
 
 	/* and supply change events */
 	wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_USB_FB);
+			    wm8350_charger_handler, 0, "USB", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_WALL_FB);
+			    wm8350_charger_handler, 0, "Wall", wm8350);
 	wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
-			    wm8350_charger_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_BAT_FB);
+			    wm8350_charger_handler, 0, "Battery", wm8350);
 }
 
 static void free_charger_irq(struct wm8350 *wm8350)
 {
-	wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_TO);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_END);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_START);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_EXT_USB_FB);
 	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_EXT_WALL_FB);
 	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_EXT_BAT_FB);
 	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB);
 }
 
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index bcbb161bde0b..7cfdd65bebb4 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -70,7 +70,7 @@ config REGULATOR_MAX1586
 	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 
 config REGULATOR_TWL4030
-	bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
+	bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
 	depends on TWL4030_CORE
 	help
 	  This driver supports the voltage regulators provided by
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4257a8683778..9ae3cc44e668 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
-obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
+obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index 0803ffe6236d..c8f41dc05b76 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -314,13 +314,15 @@ static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
 	struct pcf50633 *pcf;
 
 	/* Already set by core driver */
-	pcf = platform_get_drvdata(pdev);
+	pcf = dev_to_pcf50633(pdev->dev.parent);
 
 	rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
 				  pdev->dev.platform_data, pcf);
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
 
+	platform_set_drvdata(pdev, rdev);
+
 	if (pcf->pdata->regulator_registered)
 		pcf->pdata->regulator_registered(pcf, pdev->id);
 
@@ -331,6 +333,7 @@ static int __devexit pcf50633_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
+	platform_set_drvdata(pdev, NULL);
 	regulator_unregister(rdev);
 
 	return 0;
diff --git a/drivers/regulator/twl4030-regulator.c b/drivers/regulator/twl-regulator.c
index e2032fb60b55..7ea1c3a31081 100644
--- a/drivers/regulator/twl4030-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -1,5 +1,5 @@
 /*
- * twl4030-regulator.c -- support regulators in twl4030 family chips
+ * twl-regulator.c -- support regulators in twl4030/twl6030 family chips
  *
  * Copyright (C) 2008 David Brownell
  *
@@ -15,11 +15,11 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*
- * The TWL4030/TW5030/TPS659x0 family chips include power management, a
+ * The TWL4030/TW5030/TPS659x0/TWL6030 family chips include power management, a
  * USB OTG transceiver, an RTC, ADC, PWM, and lots more.  Some versions
  * include an audio codec, battery charger, and more voltage regulators.
  * These chips are often used in OMAP-based systems.
@@ -33,7 +33,7 @@ struct twlreg_info {
 	/* start of regulator's PM_RECEIVER control register bank */
 	u8			base;
 
-	/* twl4030 resource ID, for resource control state machine */
+	/* twl resource ID, for resource control state machine */
 	u8			id;
 
 	/* voltage in mV = table[VSEL]; table_len must be a power-of-two */
@@ -52,27 +52,38 @@ struct twlreg_info {
  * The first three registers of all power resource banks help hardware to
  * manage the various resource groups.
  */
+/* Common offset in TWL4030/6030 */
 #define VREG_GRP		0
+/* TWL4030 register offsets */
 #define VREG_TYPE		1
 #define VREG_REMAP		2
 #define VREG_DEDICATED		3	/* LDO control */
-
+/* TWL6030 register offsets */
+#define VREG_TRANS		1
+#define VREG_STATE		2
+#define VREG_VOLTAGE		3
+/* TWL6030 Misc register offsets */
+#define VREG_BC_ALL		1
+#define VREG_BC_REF		2
+#define VREG_BC_PROC		3
+#define VREG_BC_CLK_RST		4
 
 static inline int
-twl4030reg_read(struct twlreg_info *info, unsigned offset)
+twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
 {
 	u8 value;
 	int status;
 
-	status = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER,
+	status = twl_i2c_read_u8(slave_subgp,
 			&value, info->base + offset);
 	return (status < 0) ? status : value;
 }
 
 static inline int
-twl4030reg_write(struct twlreg_info *info, unsigned offset, u8 value)
+twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset,
+						 u8 value)
 {
-	return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+	return twl_i2c_write_u8(slave_subgp,
 			value, info->base + offset);
 }
 
@@ -80,59 +91,79 @@ twl4030reg_write(struct twlreg_info *info, unsigned offset, u8 value)
 
 /* generic power resource operations, which work on all regulators */
 
-static int twl4030reg_grp(struct regulator_dev *rdev)
+static int twlreg_grp(struct regulator_dev *rdev)
 {
-	return twl4030reg_read(rdev_get_drvdata(rdev), VREG_GRP);
+	return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER,
+								 VREG_GRP);
 }
 
 /*
  * Enable/disable regulators by joining/leaving the P1 (processor) group.
  * We assume nobody else is updating the DEV_GRP registers.
  */
-
-#define P3_GRP		BIT(7)		/* "peripherals" */
-#define P2_GRP		BIT(6)		/* secondary processor, modem, etc */
-#define P1_GRP		BIT(5)		/* CPU/Linux */
-
-static int twl4030reg_is_enabled(struct regulator_dev *rdev)
+/* definition for 4030 family */
+#define P3_GRP_4030	BIT(7)		/* "peripherals" */
+#define P2_GRP_4030	BIT(6)		/* secondary processor, modem, etc */
+#define P1_GRP_4030	BIT(5)		/* CPU/Linux */
+/* definition for 6030 family */
+#define P3_GRP_6030	BIT(2)		/* secondary processor, modem, etc */
+#define P2_GRP_6030	BIT(1)		/* "peripherals" */
+#define P1_GRP_6030	BIT(0)		/* CPU/Linux */
+
+static int twlreg_is_enabled(struct regulator_dev *rdev)
 {
-	int	state = twl4030reg_grp(rdev);
+	int	state = twlreg_grp(rdev);
 
 	if (state < 0)
 		return state;
 
-	return (state & P1_GRP) != 0;
+	if (twl_class_is_4030())
+		state &= P1_GRP_4030;
+	else
+		state &= P1_GRP_6030;
+	return state;
 }
 
-static int twl4030reg_enable(struct regulator_dev *rdev)
+static int twlreg_enable(struct regulator_dev *rdev)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	int			grp;
 
-	grp = twl4030reg_read(info, VREG_GRP);
+	grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
 	if (grp < 0)
 		return grp;
 
-	grp |= P1_GRP;
-	return twl4030reg_write(info, VREG_GRP, grp);
+	if (twl_class_is_4030())
+		grp |= P1_GRP_4030;
+	else
+		grp |= P1_GRP_6030;
+
+	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
 }
 
-static int twl4030reg_disable(struct regulator_dev *rdev)
+static int twlreg_disable(struct regulator_dev *rdev)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	int			grp;
 
-	grp = twl4030reg_read(info, VREG_GRP);
+	grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
 	if (grp < 0)
 		return grp;
 
-	grp &= ~P1_GRP;
-	return twl4030reg_write(info, VREG_GRP, grp);
+	if (twl_class_is_4030())
+		grp &= ~P1_GRP_4030;
+	else
+		grp &= ~P1_GRP_6030;
+
+	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
 }
 
-static int twl4030reg_get_status(struct regulator_dev *rdev)
+static int twlreg_get_status(struct regulator_dev *rdev)
 {
-	int	state = twl4030reg_grp(rdev);
+	int	state = twlreg_grp(rdev);
+
+	if (twl_class_is_6030())
+		return 0; /* FIXME return for 6030 regulator */
 
 	if (state < 0)
 		return state;
@@ -146,12 +177,15 @@ static int twl4030reg_get_status(struct regulator_dev *rdev)
 		: REGULATOR_STATUS_STANDBY;
 }
 
-static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
+static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	unsigned		message;
 	int			status;
 
+	if (twl_class_is_6030())
+		return 0; /* FIXME return for 6030 regulator */
+
 	/* We can only set the mode through state machine commands... */
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
@@ -165,18 +199,18 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
 	}
 
 	/* Ensure the resource is associated with some group */
-	status = twl4030reg_grp(rdev);
+	status = twlreg_grp(rdev);
 	if (status < 0)
 		return status;
-	if (!(status & (P3_GRP | P2_GRP | P1_GRP)))
+	if (!(status & (P3_GRP_4030 | P2_GRP_4030 | P1_GRP_4030)))
 		return -EACCES;
 
-	status = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
+	status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
 			message >> 8, 0x15 /* PB_WORD_MSB */ );
 	if (status >= 0)
 		return status;
 
-	return twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
+	return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
 			message, 0x16 /* PB_WORD_LSB */ );
 }
 
@@ -260,9 +294,31 @@ static const u16 VSIM_VSEL_table[] = {
 static const u16 VDAC_VSEL_table[] = {
 	1200, 1300, 1800, 1800,
 };
+static const u16 VAUX1_6030_VSEL_table[] = {
+	1000, 1300, 1800, 2500,
+	2800, 2900, 3000, 3000,
+};
+static const u16 VAUX2_6030_VSEL_table[] = {
+	1200, 1800, 2500, 2750,
+	2800, 2800, 2800, 2800,
+};
+static const u16 VAUX3_6030_VSEL_table[] = {
+	1000, 1200, 1300, 1800,
+	2500, 2800, 3000, 3000,
+};
+static const u16 VMMC_VSEL_table[] = {
+	1200, 1800, 2800, 2900,
+	3000, 3000, 3000, 3000,
+};
+static const u16 VPP_VSEL_table[] = {
+	1800, 1900, 2000, 2100,
+	2200, 2300, 2400, 2500,
+};
+static const u16 VUSIM_VSEL_table[] = {
+	1200, 1800, 2500, 2900,
+};
 
-
-static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
+static int twlldo_list_voltage(struct regulator_dev *rdev, unsigned index)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	int			mV = info->table[index];
@@ -271,7 +327,7 @@ static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
 }
 
 static int
-twl4030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
+twlldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	int			vsel;
@@ -288,16 +344,18 @@ twl4030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
 
 		/* use the first in-range value */
 		if (min_uV <= uV && uV <= max_uV)
-			return twl4030reg_write(info, VREG_DEDICATED, vsel);
+			return twlreg_write(info, TWL_MODULE_PM_RECEIVER,
+							VREG_VOLTAGE, vsel);
 	}
 
 	return -EDOM;
 }
 
-static int twl4030ldo_get_voltage(struct regulator_dev *rdev)
+static int twlldo_get_voltage(struct regulator_dev *rdev)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
-	int			vsel = twl4030reg_read(info, VREG_DEDICATED);
+	int		vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
+								VREG_VOLTAGE);
 
 	if (vsel < 0)
 		return vsel;
@@ -306,19 +364,19 @@ static int twl4030ldo_get_voltage(struct regulator_dev *rdev)
 	return LDO_MV(info->table[vsel]) * 1000;
 }
 
-static struct regulator_ops twl4030ldo_ops = {
-	.list_voltage	= twl4030ldo_list_voltage,
+static struct regulator_ops twlldo_ops = {
+	.list_voltage	= twlldo_list_voltage,
 
-	.set_voltage	= twl4030ldo_set_voltage,
-	.get_voltage	= twl4030ldo_get_voltage,
+	.set_voltage	= twlldo_set_voltage,
+	.get_voltage	= twlldo_get_voltage,
 
-	.enable		= twl4030reg_enable,
-	.disable	= twl4030reg_disable,
-	.is_enabled	= twl4030reg_is_enabled,
+	.enable		= twlreg_enable,
+	.disable	= twlreg_disable,
+	.is_enabled	= twlreg_is_enabled,
 
-	.set_mode	= twl4030reg_set_mode,
+	.set_mode	= twlreg_set_mode,
 
-	.get_status	= twl4030reg_get_status,
+	.get_status	= twlreg_get_status,
 };
 
 /*----------------------------------------------------------------------*/
@@ -326,60 +384,69 @@ static struct regulator_ops twl4030ldo_ops = {
 /*
  * Fixed voltage LDOs don't have a VSEL field to update.
  */
-static int twl4030fixed_list_voltage(struct regulator_dev *rdev, unsigned index)
+static int twlfixed_list_voltage(struct regulator_dev *rdev, unsigned index)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 
 	return info->min_mV * 1000;
 }
 
-static int twl4030fixed_get_voltage(struct regulator_dev *rdev)
+static int twlfixed_get_voltage(struct regulator_dev *rdev)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 
 	return info->min_mV * 1000;
 }
 
-static struct regulator_ops twl4030fixed_ops = {
-	.list_voltage	= twl4030fixed_list_voltage,
+static struct regulator_ops twlfixed_ops = {
+	.list_voltage	= twlfixed_list_voltage,
 
-	.get_voltage	= twl4030fixed_get_voltage,
+	.get_voltage	= twlfixed_get_voltage,
 
-	.enable		= twl4030reg_enable,
-	.disable	= twl4030reg_disable,
-	.is_enabled	= twl4030reg_is_enabled,
+	.enable		= twlreg_enable,
+	.disable	= twlreg_disable,
+	.is_enabled	= twlreg_is_enabled,
 
-	.set_mode	= twl4030reg_set_mode,
+	.set_mode	= twlreg_set_mode,
 
-	.get_status	= twl4030reg_get_status,
+	.get_status	= twlreg_get_status,
 };
 
 /*----------------------------------------------------------------------*/
 
-#define TWL_ADJUSTABLE_LDO(label, offset, num) { \
+#define TWL4030_ADJUSTABLE_LDO(label, offset, num) \
+		TWL_ADJUSTABLE_LDO(label, offset, num, TWL4030)
+#define TWL4030_FIXED_LDO(label, offset, mVolts, num) \
+		TWL_FIXED_LDO(label, offset, mVolts, num, TWL4030)
+#define TWL6030_ADJUSTABLE_LDO(label, offset, num) \
+		TWL_ADJUSTABLE_LDO(label, offset, num, TWL6030)
+#define TWL6030_FIXED_LDO(label, offset, mVolts, num) \
+		TWL_FIXED_LDO(label, offset, mVolts, num, TWL6030)
+
+#define TWL_ADJUSTABLE_LDO(label, offset, num, family) { \
 	.base = offset, \
 	.id = num, \
 	.table_len = ARRAY_SIZE(label##_VSEL_table), \
 	.table = label##_VSEL_table, \
 	.desc = { \
 		.name = #label, \
-		.id = TWL4030_REG_##label, \
+		.id = family##_REG_##label, \
 		.n_voltages = ARRAY_SIZE(label##_VSEL_table), \
-		.ops = &twl4030ldo_ops, \
+		.ops = &twlldo_ops, \
 		.type = REGULATOR_VOLTAGE, \
 		.owner = THIS_MODULE, \
 		}, \
 	}
 
-#define TWL_FIXED_LDO(label, offset, mVolts, num) { \
+#define TWL_FIXED_LDO(label, offset, mVolts, num, family) { \
 	.base = offset, \
 	.id = num, \
 	.min_mV = mVolts, \
 	.desc = { \
 		.name = #label, \
-		.id = TWL4030_REG_##label, \
+		.id = family##_REG_##label, \
 		.n_voltages = 1, \
-		.ops = &twl4030fixed_ops, \
+		.ops = &twlfixed_ops, \
 		.type = REGULATOR_VOLTAGE, \
 		.owner = THIS_MODULE, \
 		}, \
@@ -389,35 +456,47 @@ static struct regulator_ops twl4030fixed_ops = {
  * We list regulators here if systems need some level of
  * software control over them after boot.
  */
-static struct twlreg_info twl4030_regs[] = {
-	TWL_ADJUSTABLE_LDO(VAUX1, 0x17, 1),
-	TWL_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2),
-	TWL_ADJUSTABLE_LDO(VAUX2, 0x1b, 2),
-	TWL_ADJUSTABLE_LDO(VAUX3, 0x1f, 3),
-	TWL_ADJUSTABLE_LDO(VAUX4, 0x23, 4),
-	TWL_ADJUSTABLE_LDO(VMMC1, 0x27, 5),
-	TWL_ADJUSTABLE_LDO(VMMC2, 0x2b, 6),
+static struct twlreg_info twl_regs[] = {
+	TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1),
+	TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2),
+	TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2),
+	TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3),
+	TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4),
+	TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5),
+	TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6),
 	/*
-	TWL_ADJUSTABLE_LDO(VPLL1, 0x2f, 7),
+	TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7),
 	*/
-	TWL_ADJUSTABLE_LDO(VPLL2, 0x33, 8),
-	TWL_ADJUSTABLE_LDO(VSIM, 0x37, 9),
-	TWL_ADJUSTABLE_LDO(VDAC, 0x3b, 10),
+	TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8),
+	TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9),
+	TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10),
 	/*
-	TWL_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11),
-	TWL_ADJUSTABLE_LDO(VINTANA2, 0x43, 12),
-	TWL_ADJUSTABLE_LDO(VINTDIG, 0x47, 13),
-	TWL_SMPS(VIO, 0x4b, 14),
-	TWL_SMPS(VDD1, 0x55, 15),
-	TWL_SMPS(VDD2, 0x63, 16),
+	TWL4030_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11),
+	TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12),
+	TWL4030_ADJUSTABLE_LDO(VINTDIG, 0x47, 13),
+	TWL4030_SMPS(VIO, 0x4b, 14),
+	TWL4030_SMPS(VDD1, 0x55, 15),
+	TWL4030_SMPS(VDD2, 0x63, 16),
 	 */
-	TWL_FIXED_LDO(VUSB1V5, 0x71, 1500, 17),
-	TWL_FIXED_LDO(VUSB1V8, 0x74, 1800, 18),
-	TWL_FIXED_LDO(VUSB3V1, 0x77, 3100, 19),
+	TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17),
+	TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18),
+	TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19),
 	/* VUSBCP is managed *only* by the USB subchip */
+
+	/* 6030 REG with base as PMC Slave Misc : 0x0030 */
+	TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1),
+	TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2),
+	TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3),
+	TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4),
+	TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5),
+	TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7),
+	TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15),
+	TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16),
+	TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17),
+	TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18)
 };
 
-static int twl4030reg_probe(struct platform_device *pdev)
+static int twlreg_probe(struct platform_device *pdev)
 {
 	int				i;
 	struct twlreg_info		*info;
@@ -425,10 +504,10 @@ static int twl4030reg_probe(struct platform_device *pdev)
 	struct regulation_constraints	*c;
 	struct regulator_dev		*rdev;
 
-	for (i = 0, info = NULL; i < ARRAY_SIZE(twl4030_regs); i++) {
-		if (twl4030_regs[i].desc.id != pdev->id)
+	for (i = 0, info = NULL; i < ARRAY_SIZE(twl_regs); i++) {
+		if (twl_regs[i].desc.id != pdev->id)
 			continue;
-		info = twl4030_regs + i;
+		info = twl_regs + i;
 		break;
 	}
 	if (!info)
@@ -466,35 +545,35 @@ static int twl4030reg_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit twl4030reg_remove(struct platform_device *pdev)
+static int __devexit twlreg_remove(struct platform_device *pdev)
 {
 	regulator_unregister(platform_get_drvdata(pdev));
 	return 0;
 }
 
-MODULE_ALIAS("platform:twl4030_reg");
+MODULE_ALIAS("platform:twl_reg");
 
-static struct platform_driver twl4030reg_driver = {
-	.probe		= twl4030reg_probe,
-	.remove		= __devexit_p(twl4030reg_remove),
+static struct platform_driver twlreg_driver = {
+	.probe		= twlreg_probe,
+	.remove		= __devexit_p(twlreg_remove),
 	/* NOTE: short name, to work around driver model truncation of
-	 * "twl4030_regulator.12" (and friends) to "twl4030_regulator.1".
+	 * "twl_regulator.12" (and friends) to "twl_regulator.1".
 	 */
-	.driver.name	= "twl4030_reg",
+	.driver.name	= "twl_reg",
 	.driver.owner	= THIS_MODULE,
 };
 
-static int __init twl4030reg_init(void)
+static int __init twlreg_init(void)
 {
-	return platform_driver_register(&twl4030reg_driver);
+	return platform_driver_register(&twlreg_driver);
 }
-subsys_initcall(twl4030reg_init);
+subsys_initcall(twlreg_init);
 
-static void __exit twl4030reg_exit(void)
+static void __exit twlreg_exit(void)
 {
-	platform_driver_unregister(&twl4030reg_driver);
+	platform_driver_unregister(&twlreg_driver);
 }
-module_exit(twl4030reg_exit)
+module_exit(twlreg_exit)
 
-MODULE_DESCRIPTION("TWL4030 regulator driver");
+MODULE_DESCRIPTION("TWL regulator driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 768bd0e5b48b..1bbff099a546 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1330,9 +1330,10 @@ static struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = {
 	 },
 };
 
-static void pmic_uv_handler(struct wm8350 *wm8350, int irq, void *data)
+static irqreturn_t pmic_uv_handler(int irq, void *data)
 {
 	struct regulator_dev *rdev = (struct regulator_dev *)data;
+	struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
 
 	mutex_lock(&rdev->mutex);
 	if (irq == WM8350_IRQ_CS1 || irq == WM8350_IRQ_CS2)
@@ -1344,6 +1345,8 @@ static void pmic_uv_handler(struct wm8350 *wm8350, int irq, void *data)
 					      REGULATOR_EVENT_UNDER_VOLTAGE,
 					      wm8350);
 	mutex_unlock(&rdev->mutex);
+
+	return IRQ_HANDLED;
 }
 
 static int wm8350_regulator_probe(struct platform_device *pdev)
@@ -1388,7 +1391,7 @@ static int wm8350_regulator_probe(struct platform_device *pdev)
 
 	/* register regulator IRQ */
 	ret = wm8350_register_irq(wm8350, wm8350_reg[pdev->id].irq,
-				  pmic_uv_handler, rdev);
+				  pmic_uv_handler, 0, "UV", rdev);
 	if (ret < 0) {
 		regulator_unregister(rdev);
 		dev_err(&pdev->dev, "failed to register regulator %s IRQ\n",
@@ -1396,8 +1399,6 @@ static int wm8350_regulator_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	wm8350_unmask_irq(wm8350, wm8350_reg[pdev->id].irq);
-
 	return 0;
 }
 
@@ -1406,7 +1407,6 @@ static int wm8350_regulator_remove(struct platform_device *pdev)
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 	struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
 
-	wm8350_mask_irq(wm8350, wm8350_reg[pdev->id].irq);
 	wm8350_free_irq(wm8350, wm8350_reg[pdev->id].irq);
 
 	regulator_unregister(rdev);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f2e1004d12c7..71fbd6e8edf7 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -258,14 +258,14 @@ config RTC_DRV_TWL92330
 	  the Menelaus driver; it's not separate module.
 
 config RTC_DRV_TWL4030
-	tristate "TI TWL4030/TWL5030/TPS659x0"
+	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
 	depends on RTC_CLASS && TWL4030_CORE
 	help
 	  If you say yes here you get support for the RTC on the
-	  TWL4030 family chips, used mostly with OMAP3 platforms.
+	  TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called rtc-twl4030.
+	  will be called rtc-twl.
 
 config RTC_DRV_S35390A
 	tristate "Seiko Instruments S-35390A"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index af1ba7ae2857..7da6efb3e953 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -80,7 +80,7 @@ obj-$(CONFIG_RTC_DRV_STK17TA8)	+= rtc-stk17ta8.o
 obj-$(CONFIG_RTC_DRV_STMP)	+= rtc-stmp3xxx.o
 obj-$(CONFIG_RTC_DRV_SUN4V)	+= rtc-sun4v.o
 obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
-obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl4030.o
+obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl.o
 obj-$(CONFIG_RTC_DRV_TX4939)	+= rtc-tx4939.o
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c
index 4c5d5d0c4cfc..9b74e9c9151c 100644
--- a/drivers/rtc/rtc-pcf50633.c
+++ b/drivers/rtc/rtc-pcf50633.c
@@ -277,16 +277,13 @@ static void pcf50633_rtc_irq(int irq, void *data)
 
 static int __devinit pcf50633_rtc_probe(struct platform_device *pdev)
 {
-	struct pcf50633_subdev_pdata *pdata;
 	struct pcf50633_rtc *rtc;
 
-
 	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
 	if (!rtc)
 		return -ENOMEM;
 
-	pdata = pdev->dev.platform_data;
-	rtc->pcf = pdata->pcf;
+	rtc->pcf = dev_to_pcf50633(pdev->dev.parent);
 	platform_set_drvdata(pdev, rtc);
 	rtc->rtc_dev = rtc_device_register("pcf50633-rtc", &pdev->dev,
 				&pcf50633_rtc_ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl.c
index 9c8c70c497dc..c6a83a2a722c 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl.c
@@ -1,5 +1,5 @@
 /*
- * rtc-twl4030.c -- TWL4030 Real Time Clock interface
+ * rtc-twl.c -- TWL Real Time Clock interface
  *
  * Copyright (C) 2007 MontaVista Software, Inc
  * Author: Alexandre Rusev <source@mvista.com>
@@ -28,33 +28,81 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 
 /*
  * RTC block register offsets (use TWL_MODULE_RTC)
  */
-#define REG_SECONDS_REG                          0x00
-#define REG_MINUTES_REG                          0x01
-#define REG_HOURS_REG                            0x02
-#define REG_DAYS_REG                             0x03
-#define REG_MONTHS_REG                           0x04
-#define REG_YEARS_REG                            0x05
-#define REG_WEEKS_REG                            0x06
-
-#define REG_ALARM_SECONDS_REG                    0x07
-#define REG_ALARM_MINUTES_REG                    0x08
-#define REG_ALARM_HOURS_REG                      0x09
-#define REG_ALARM_DAYS_REG                       0x0A
-#define REG_ALARM_MONTHS_REG                     0x0B
-#define REG_ALARM_YEARS_REG                      0x0C
-
-#define REG_RTC_CTRL_REG                         0x0D
-#define REG_RTC_STATUS_REG                       0x0E
-#define REG_RTC_INTERRUPTS_REG                   0x0F
-
-#define REG_RTC_COMP_LSB_REG                     0x10
-#define REG_RTC_COMP_MSB_REG                     0x11
+enum {
+	REG_SECONDS_REG = 0,
+	REG_MINUTES_REG,
+	REG_HOURS_REG,
+	REG_DAYS_REG,
+	REG_MONTHS_REG,
+	REG_YEARS_REG,
+	REG_WEEKS_REG,
+
+	REG_ALARM_SECONDS_REG,
+	REG_ALARM_MINUTES_REG,
+	REG_ALARM_HOURS_REG,
+	REG_ALARM_DAYS_REG,
+	REG_ALARM_MONTHS_REG,
+	REG_ALARM_YEARS_REG,
+
+	REG_RTC_CTRL_REG,
+	REG_RTC_STATUS_REG,
+	REG_RTC_INTERRUPTS_REG,
+
+	REG_RTC_COMP_LSB_REG,
+	REG_RTC_COMP_MSB_REG,
+};
+const static u8 twl4030_rtc_reg_map[] = {
+	[REG_SECONDS_REG] = 0x00,
+	[REG_MINUTES_REG] = 0x01,
+	[REG_HOURS_REG] = 0x02,
+	[REG_DAYS_REG] = 0x03,
+	[REG_MONTHS_REG] = 0x04,
+	[REG_YEARS_REG] = 0x05,
+	[REG_WEEKS_REG] = 0x06,
+
+	[REG_ALARM_SECONDS_REG] = 0x07,
+	[REG_ALARM_MINUTES_REG] = 0x08,
+	[REG_ALARM_HOURS_REG] = 0x09,
+	[REG_ALARM_DAYS_REG] = 0x0A,
+	[REG_ALARM_MONTHS_REG] = 0x0B,
+	[REG_ALARM_YEARS_REG] = 0x0C,
+
+	[REG_RTC_CTRL_REG] = 0x0D,
+	[REG_RTC_STATUS_REG] = 0x0E,
+	[REG_RTC_INTERRUPTS_REG] = 0x0F,
+
+	[REG_RTC_COMP_LSB_REG] = 0x10,
+	[REG_RTC_COMP_MSB_REG] = 0x11,
+};
+const static u8 twl6030_rtc_reg_map[] = {
+	[REG_SECONDS_REG] = 0x00,
+	[REG_MINUTES_REG] = 0x01,
+	[REG_HOURS_REG] = 0x02,
+	[REG_DAYS_REG] = 0x03,
+	[REG_MONTHS_REG] = 0x04,
+	[REG_YEARS_REG] = 0x05,
+	[REG_WEEKS_REG] = 0x06,
+
+	[REG_ALARM_SECONDS_REG] = 0x08,
+	[REG_ALARM_MINUTES_REG] = 0x09,
+	[REG_ALARM_HOURS_REG] = 0x0A,
+	[REG_ALARM_DAYS_REG] = 0x0B,
+	[REG_ALARM_MONTHS_REG] = 0x0C,
+	[REG_ALARM_YEARS_REG] = 0x0D,
+
+	[REG_RTC_CTRL_REG] = 0x10,
+	[REG_RTC_STATUS_REG] = 0x11,
+	[REG_RTC_INTERRUPTS_REG] = 0x12,
+
+	[REG_RTC_COMP_LSB_REG] = 0x13,
+	[REG_RTC_COMP_MSB_REG] = 0x14,
+};
 
 /* RTC_CTRL_REG bitfields */
 #define BIT_RTC_CTRL_REG_STOP_RTC_M              0x01
@@ -84,31 +132,32 @@
 #define ALL_TIME_REGS		6
 
 /*----------------------------------------------------------------------*/
+static u8  *rtc_reg_map;
 
 /*
- * Supports 1 byte read from TWL4030 RTC register.
+ * Supports 1 byte read from TWL RTC register.
  */
-static int twl4030_rtc_read_u8(u8 *data, u8 reg)
+static int twl_rtc_read_u8(u8 *data, u8 reg)
 {
 	int ret;
 
-	ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg);
+	ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
 	if (ret < 0)
-		pr_err("twl4030_rtc: Could not read TWL4030"
+		pr_err("twl_rtc: Could not read TWL"
 		       "register %X - error %d\n", reg, ret);
 	return ret;
 }
 
 /*
- * Supports 1 byte write to TWL4030 RTC registers.
+ * Supports 1 byte write to TWL RTC registers.
  */
-static int twl4030_rtc_write_u8(u8 data, u8 reg)
+static int twl_rtc_write_u8(u8 data, u8 reg)
 {
 	int ret;
 
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg);
+	ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
 	if (ret < 0)
-		pr_err("twl4030_rtc: Could not write TWL4030"
+		pr_err("twl_rtc: Could not write TWL"
 		       "register %X - error %d\n", reg, ret);
 	return ret;
 }
@@ -129,7 +178,7 @@ static int set_rtc_irq_bit(unsigned char bit)
 
 	val = rtc_irq_bits | bit;
 	val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
-	ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
+	ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
 	if (ret == 0)
 		rtc_irq_bits = val;
 
@@ -145,14 +194,14 @@ static int mask_rtc_irq_bit(unsigned char bit)
 	int ret;
 
 	val = rtc_irq_bits & ~bit;
-	ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
+	ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
 	if (ret == 0)
 		rtc_irq_bits = val;
 
 	return ret;
 }
 
-static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
+static int twl_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
 {
 	int ret;
 
@@ -164,7 +213,7 @@ static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
 	return ret;
 }
 
-static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
+static int twl_rtc_update_irq_enable(struct device *dev, unsigned enabled)
 {
 	int ret;
 
@@ -177,7 +226,7 @@ static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
 }
 
 /*
- * Gets current TWL4030 RTC time and date parameters.
+ * Gets current TWL RTC time and date parameters.
  *
  * The RTC's time/alarm representation is not what gmtime(3) requires
  * Linux to use:
@@ -185,24 +234,24 @@ static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
  *  - Months are 1..12 vs Linux 0-11
  *  - Years are 0..99 vs Linux 1900..N (we assume 21st century)
  */
-static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm)
+static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	unsigned char rtc_data[ALL_TIME_REGS + 1];
 	int ret;
 	u8 save_control;
 
-	ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
+	ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
 	if (ret < 0)
 		return ret;
 
 	save_control |= BIT_RTC_CTRL_REG_GET_TIME_M;
 
-	ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+	ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
 	if (ret < 0)
 		return ret;
 
-	ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
-			       REG_SECONDS_REG, ALL_TIME_REGS);
+	ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
+			(rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
 
 	if (ret < 0) {
 		dev_err(dev, "rtc_read_time error %d\n", ret);
@@ -219,7 +268,7 @@ static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	return ret;
 }
 
-static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm)
+static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	unsigned char save_control;
 	unsigned char rtc_data[ALL_TIME_REGS + 1];
@@ -233,18 +282,18 @@ static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	rtc_data[6] = bin2bcd(tm->tm_year - 100);
 
 	/* Stop RTC while updating the TC registers */
-	ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
+	ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
 	if (ret < 0)
 		goto out;
 
 	save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
-	twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+	twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
 	if (ret < 0)
 		goto out;
 
 	/* update all the time registers in one shot */
-	ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data,
-			REG_SECONDS_REG, ALL_TIME_REGS);
+	ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data,
+		(rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
 	if (ret < 0) {
 		dev_err(dev, "rtc_set_time error %d\n", ret);
 		goto out;
@@ -252,22 +301,22 @@ static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	/* Start back RTC */
 	save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
-	ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+	ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
 
 out:
 	return ret;
 }
 
 /*
- * Gets current TWL4030 RTC alarm time.
+ * Gets current TWL RTC alarm time.
  */
-static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 {
 	unsigned char rtc_data[ALL_TIME_REGS + 1];
 	int ret;
 
-	ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
-			       REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
+	ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
+			(rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
 	if (ret < 0) {
 		dev_err(dev, "rtc_read_alarm error %d\n", ret);
 		return ret;
@@ -288,12 +337,12 @@ static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	return ret;
 }
 
-static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 {
 	unsigned char alarm_data[ALL_TIME_REGS + 1];
 	int ret;
 
-	ret = twl4030_rtc_alarm_irq_enable(dev, 0);
+	ret = twl_rtc_alarm_irq_enable(dev, 0);
 	if (ret)
 		goto out;
 
@@ -305,20 +354,20 @@ static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	alarm_data[6] = bin2bcd(alm->time.tm_year - 100);
 
 	/* update all the alarm registers in one shot */
-	ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data,
-			REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
+	ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data,
+		(rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
 	if (ret) {
 		dev_err(dev, "rtc_set_alarm error %d\n", ret);
 		goto out;
 	}
 
 	if (alm->enabled)
-		ret = twl4030_rtc_alarm_irq_enable(dev, 1);
+		ret = twl_rtc_alarm_irq_enable(dev, 1);
 out:
 	return ret;
 }
 
-static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
+static irqreturn_t twl_rtc_interrupt(int irq, void *rtc)
 {
 	unsigned long events = 0;
 	int ret = IRQ_NONE;
@@ -333,7 +382,7 @@ static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
 	local_irq_enable();
 #endif
 
-	res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
+	res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
 	if (res)
 		goto out;
 	/*
@@ -347,26 +396,28 @@ static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
 	else
 		events |= RTC_IRQF | RTC_UF;
 
-	res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M,
+	res = twl_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M,
 				   REG_RTC_STATUS_REG);
 	if (res)
 		goto out;
 
-	/* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
-	 * needs 2 reads to clear the interrupt. One read is done in
-	 * do_twl4030_pwrirq(). Doing the second read, to clear
-	 * the bit.
-	 *
-	 * FIXME the reason PWR_ISR1 needs an extra read is that
-	 * RTC_IF retriggered until we cleared REG_ALARM_M above.
-	 * But re-reading like this is a bad hack; by doing so we
-	 * risk wrongly clearing status for some other IRQ (losing
-	 * the interrupt).  Be smarter about handling RTC_UF ...
-	 */
-	res = twl4030_i2c_read_u8(TWL4030_MODULE_INT,
+	if (twl_class_is_4030()) {
+		/* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
+		 * needs 2 reads to clear the interrupt. One read is done in
+		 * do_twl_pwrirq(). Doing the second read, to clear
+		 * the bit.
+		 *
+		 * FIXME the reason PWR_ISR1 needs an extra read is that
+		 * RTC_IF retriggered until we cleared REG_ALARM_M above.
+		 * But re-reading like this is a bad hack; by doing so we
+		 * risk wrongly clearing status for some other IRQ (losing
+		 * the interrupt).  Be smarter about handling RTC_UF ...
+		 */
+		res = twl_i2c_read_u8(TWL4030_MODULE_INT,
 			&rd_reg, TWL4030_INT_PWR_ISR1);
-	if (res)
-		goto out;
+		if (res)
+			goto out;
+	}
 
 	/* Notify RTC core on event */
 	rtc_update_irq(rtc, 1, events);
@@ -376,18 +427,18 @@ out:
 	return ret;
 }
 
-static struct rtc_class_ops twl4030_rtc_ops = {
-	.read_time	= twl4030_rtc_read_time,
-	.set_time	= twl4030_rtc_set_time,
-	.read_alarm	= twl4030_rtc_read_alarm,
-	.set_alarm	= twl4030_rtc_set_alarm,
-	.alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
-	.update_irq_enable = twl4030_rtc_update_irq_enable,
+static struct rtc_class_ops twl_rtc_ops = {
+	.read_time	= twl_rtc_read_time,
+	.set_time	= twl_rtc_set_time,
+	.read_alarm	= twl_rtc_read_alarm,
+	.set_alarm	= twl_rtc_set_alarm,
+	.alarm_irq_enable = twl_rtc_alarm_irq_enable,
+	.update_irq_enable = twl_rtc_update_irq_enable,
 };
 
 /*----------------------------------------------------------------------*/
 
-static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
+static int __devinit twl_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	int ret = 0;
@@ -398,7 +449,7 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	rtc = rtc_device_register(pdev->name,
-				  &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
+				  &pdev->dev, &twl_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
 		ret = PTR_ERR(rtc);
 		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
@@ -409,7 +460,7 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, rtc);
 
-	ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
+	ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
 	if (ret < 0)
 		goto out1;
 
@@ -420,11 +471,11 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
 
 	/* Clear RTC Power up reset and pending alarm interrupts */
-	ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
+	ret = twl_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
 	if (ret < 0)
 		goto out1;
 
-	ret = request_irq(irq, twl4030_rtc_interrupt,
+	ret = request_irq(irq, twl_rtc_interrupt,
 				IRQF_TRIGGER_RISING,
 				dev_name(&rtc->dev), rtc);
 	if (ret < 0) {
@@ -432,21 +483,28 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
 		goto out1;
 	}
 
+	if (twl_class_is_6030()) {
+		twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
+			REG_INT_MSK_LINE_A);
+		twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
+			REG_INT_MSK_STS_A);
+	}
+
 	/* Check RTC module status, Enable if it is off */
-	ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
+	ret = twl_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
 	if (ret < 0)
 		goto out2;
 
 	if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
-		dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n");
+		dev_info(&pdev->dev, "Enabling TWL-RTC.\n");
 		rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
-		ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
+		ret = twl_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
 		if (ret < 0)
 			goto out2;
 	}
 
 	/* init cached IRQ enable bits */
-	ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
+	ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
 	if (ret < 0)
 		goto out2;
 
@@ -461,10 +519,10 @@ out0:
 }
 
 /*
- * Disable all TWL4030 RTC module interrupts.
+ * Disable all TWL RTC module interrupts.
  * Sets status flag to free.
  */
-static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
+static int __devexit twl_rtc_remove(struct platform_device *pdev)
 {
 	/* leave rtc running, but disable irqs */
 	struct rtc_device *rtc = platform_get_drvdata(pdev);
@@ -472,6 +530,13 @@ static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
 
 	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
 	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+	if (twl_class_is_6030()) {
+		twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
+			REG_INT_MSK_LINE_A);
+		twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
+			REG_INT_MSK_STS_A);
+	}
+
 
 	free_irq(irq, rtc);
 
@@ -480,7 +545,7 @@ static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static void twl4030_rtc_shutdown(struct platform_device *pdev)
+static void twl_rtc_shutdown(struct platform_device *pdev)
 {
 	/* mask timer interrupts, but leave alarm interrupts on to enable
 	   power-on when alarm is triggered */
@@ -491,7 +556,7 @@ static void twl4030_rtc_shutdown(struct platform_device *pdev)
 
 static unsigned char irqstat;
 
-static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int twl_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	irqstat = rtc_irq_bits;
 
@@ -499,42 +564,47 @@ static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int twl4030_rtc_resume(struct platform_device *pdev)
+static int twl_rtc_resume(struct platform_device *pdev)
 {
 	set_rtc_irq_bit(irqstat);
 	return 0;
 }
 
 #else
-#define twl4030_rtc_suspend NULL
-#define twl4030_rtc_resume  NULL
+#define twl_rtc_suspend NULL
+#define twl_rtc_resume  NULL
 #endif
 
-MODULE_ALIAS("platform:twl4030_rtc");
+MODULE_ALIAS("platform:twl_rtc");
 
 static struct platform_driver twl4030rtc_driver = {
-	.probe		= twl4030_rtc_probe,
-	.remove		= __devexit_p(twl4030_rtc_remove),
-	.shutdown	= twl4030_rtc_shutdown,
-	.suspend	= twl4030_rtc_suspend,
-	.resume		= twl4030_rtc_resume,
+	.probe		= twl_rtc_probe,
+	.remove		= __devexit_p(twl_rtc_remove),
+	.shutdown	= twl_rtc_shutdown,
+	.suspend	= twl_rtc_suspend,
+	.resume		= twl_rtc_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "twl4030_rtc",
+		.name	= "twl_rtc",
 	},
 };
 
-static int __init twl4030_rtc_init(void)
+static int __init twl_rtc_init(void)
 {
+	if (twl_class_is_4030())
+		rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
+	else
+		rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
+
 	return platform_driver_register(&twl4030rtc_driver);
 }
-module_init(twl4030_rtc_init);
+module_init(twl_rtc_init);
 
-static void __exit twl4030_rtc_exit(void)
+static void __exit twl_rtc_exit(void)
 {
 	platform_driver_unregister(&twl4030rtc_driver);
 }
-module_exit(twl4030_rtc_exit);
+module_exit(twl_rtc_exit);
 
 MODULE_AUTHOR("Texas Instruments, MontaVista Software");
 MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c
index c91edc572eb6..f16486635a8e 100644
--- a/drivers/rtc/rtc-wm8350.c
+++ b/drivers/rtc/rtc-wm8350.c
@@ -315,9 +315,9 @@ static int wm8350_rtc_update_irq_enable(struct device *dev,
 	return 0;
 }
 
-static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq,
-				     void *data)
+static irqreturn_t wm8350_rtc_alarm_handler(int irq, void *data)
 {
+	struct wm8350 *wm8350 = data;
 	struct rtc_device *rtc = wm8350->rtc.rtc;
 	int ret;
 
@@ -330,14 +330,18 @@ static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq,
 		dev_err(&(wm8350->rtc.pdev->dev),
 			"Failed to disable alarm: %d\n", ret);
 	}
+
+	return IRQ_HANDLED;
 }
 
-static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq,
-				      void *data)
+static irqreturn_t wm8350_rtc_update_handler(int irq, void *data)
 {
+	struct wm8350 *wm8350 = data;
 	struct rtc_device *rtc = wm8350->rtc.rtc;
 
 	rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF);
+
+	return IRQ_HANDLED;
 }
 
 static const struct rtc_class_ops wm8350_rtc_ops = {
@@ -455,15 +459,14 @@ static int wm8350_rtc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
-	wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER);
-
 	wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC,
-			    wm8350_rtc_update_handler, NULL);
+			    wm8350_rtc_update_handler, 0,
+			    "RTC Seconds", wm8350);
+	wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
 
 	wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM,
-			    wm8350_rtc_alarm_handler, NULL);
-	wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM);
+			    wm8350_rtc_alarm_handler, 0,
+			    "RTC Alarm", wm8350);
 
 	return 0;
 }
@@ -473,8 +476,6 @@ static int __devexit wm8350_rtc_remove(struct platform_device *pdev)
 	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
 	struct wm8350_rtc *wm_rtc = &wm8350->rtc;
 
-	wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
-
 	wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC);
 	wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM);
 
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index bd9883f41e63..2be9f2fa41f9 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -33,7 +33,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
 
@@ -276,16 +276,16 @@ static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
 {
 	u8 check;
 
-	if ((twl4030_i2c_write_u8(module, data, address) >= 0) &&
-	    (twl4030_i2c_read_u8(module, &check, address) >= 0) &&
+	if ((twl_i2c_write_u8(module, data, address) >= 0) &&
+	    (twl_i2c_read_u8(module, &check, address) >= 0) &&
 						(check == data))
 		return 0;
 	dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
 			1, module, address, check, data);
 
 	/* Failed once: Try again */
-	if ((twl4030_i2c_write_u8(module, data, address) >= 0) &&
-	    (twl4030_i2c_read_u8(module, &check, address) >= 0) &&
+	if ((twl_i2c_write_u8(module, data, address) >= 0) &&
+	    (twl_i2c_read_u8(module, &check, address) >= 0) &&
 						(check == data))
 		return 0;
 	dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
@@ -303,7 +303,7 @@ static inline int twl4030_usb_write(struct twl4030_usb *twl,
 {
 	int ret = 0;
 
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address);
+	ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address);
 	if (ret < 0)
 		dev_dbg(twl->dev,
 			"TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
@@ -315,7 +315,7 @@ static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
 	u8 data;
 	int ret = 0;
 
-	ret = twl4030_i2c_read_u8(module, &data, address);
+	ret = twl_i2c_read_u8(module, &data, address);
 	if (ret >= 0)
 		ret = data;
 	else
@@ -462,7 +462,7 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 		 * SLEEP. We work around this by clearing the bit after usv3v1
 		 * is re-activated. This ensures that VUSB3V1 is really active.
 		 */
-		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
+		twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
 							VUSB_DEDICATED2);
 		regulator_enable(twl->usb1v5);
 		pwr &= ~PHY_PWR_PHYPWD;
@@ -505,44 +505,44 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
 static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 {
 	/* Enable writing to power configuration registers */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
 
 	/* put VUSB3V1 LDO in active state */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
 
 	/* input to VUSB3V1 LDO is from VBAT, not VBUS */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
 
 	/* Initialize 3.1V regulator */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
 
 	twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
 	if (IS_ERR(twl->usb3v1))
 		return -ENODEV;
 
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
 
 	/* Initialize 1.5V regulator */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
 
 	twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
 	if (IS_ERR(twl->usb1v5))
 		goto fail1;
 
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 
 	/* Initialize 1.8V regulator */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
 
 	twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
 	if (IS_ERR(twl->usb1v8))
 		goto fail2;
 
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 
 	/* disable access to power configuration registers */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY);
+	twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY);
 
 	return 0;
 
diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c
index ad05da5ba3c7..4c10edecfb66 100644
--- a/drivers/video/backlight/adp5520_bl.c
+++ b/drivers/video/backlight/adp5520_bl.c
@@ -15,7 +15,7 @@
 
 struct adp5520_bl {
 	struct device *master;
-	struct adp5520_backlight_platfrom_data *pdata;
+	struct adp5520_backlight_platform_data *pdata;
 	struct mutex lock;
 	unsigned long cached_daylight_max;
 	int id;
@@ -31,29 +31,30 @@ static int adp5520_bl_set(struct backlight_device *bl, int brightness)
 	if (data->pdata->en_ambl_sens) {
 		if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) {
 			/* Disable Ambient Light auto adjust */
-			ret |= adp5520_clr_bits(master, BL_CONTROL,
-					BL_AUTO_ADJ);
-			ret |= adp5520_write(master, DAYLIGHT_MAX, brightness);
+			ret |= adp5520_clr_bits(master, ADP5520_BL_CONTROL,
+					ADP5520_BL_AUTO_ADJ);
+			ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX,
+					brightness);
 		} else {
 			/*
 			 * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
 			 * restore daylight l3 sysfs brightness
 			 */
-			ret |= adp5520_write(master, DAYLIGHT_MAX,
+			ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX,
 					 data->cached_daylight_max);
-			ret |= adp5520_set_bits(master, BL_CONTROL,
-					 BL_AUTO_ADJ);
+			ret |= adp5520_set_bits(master, ADP5520_BL_CONTROL,
+					 ADP5520_BL_AUTO_ADJ);
 		}
 	} else {
-		ret |= adp5520_write(master, DAYLIGHT_MAX, brightness);
+		ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, brightness);
 	}
 
 	if (data->current_brightness && brightness == 0)
 		ret |= adp5520_set_bits(master,
-				MODE_STATUS, DIM_EN);
+				ADP5520_MODE_STATUS, ADP5520_DIM_EN);
 	else if (data->current_brightness == 0 && brightness)
 		ret |= adp5520_clr_bits(master,
-				MODE_STATUS, DIM_EN);
+				ADP5520_MODE_STATUS, ADP5520_DIM_EN);
 
 	if (!ret)
 		data->current_brightness = brightness;
@@ -79,7 +80,7 @@ static int adp5520_bl_get_brightness(struct backlight_device *bl)
 	int error;
 	uint8_t reg_val;
 
-	error = adp5520_read(data->master, BL_VALUE, &reg_val);
+	error = adp5520_read(data->master, ADP5520_BL_VALUE, &reg_val);
 
 	return error ? data->current_brightness : reg_val;
 }
@@ -93,33 +94,46 @@ static int adp5520_bl_setup(struct backlight_device *bl)
 {
 	struct adp5520_bl *data = bl_get_data(bl);
 	struct device *master = data->master;
-	struct adp5520_backlight_platfrom_data *pdata = data->pdata;
+	struct adp5520_backlight_platform_data *pdata = data->pdata;
 	int ret = 0;
 
-	ret |= adp5520_write(master, DAYLIGHT_MAX, pdata->l1_daylight_max);
-	ret |= adp5520_write(master, DAYLIGHT_DIM, pdata->l1_daylight_dim);
+	ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX,
+				pdata->l1_daylight_max);
+	ret |= adp5520_write(master, ADP5520_DAYLIGHT_DIM,
+				pdata->l1_daylight_dim);
 
 	if (pdata->en_ambl_sens) {
 		data->cached_daylight_max = pdata->l1_daylight_max;
-		ret |= adp5520_write(master, OFFICE_MAX, pdata->l2_office_max);
-		ret |= adp5520_write(master, OFFICE_DIM, pdata->l2_office_dim);
-		ret |= adp5520_write(master, DARK_MAX, pdata->l3_dark_max);
-		ret |= adp5520_write(master, DARK_DIM, pdata->l3_dark_dim);
-		ret |= adp5520_write(master, L2_TRIP, pdata->l2_trip);
-		ret |= adp5520_write(master, L2_HYS, pdata->l2_hyst);
-		ret |= adp5520_write(master, L3_TRIP, pdata->l3_trip);
-		ret |= adp5520_write(master, L3_HYS, pdata->l3_hyst);
-		ret |= adp5520_write(master, ALS_CMPR_CFG,
-			ALS_CMPR_CFG_VAL(pdata->abml_filt, L3_EN));
+		ret |= adp5520_write(master, ADP5520_OFFICE_MAX,
+				pdata->l2_office_max);
+		ret |= adp5520_write(master, ADP5520_OFFICE_DIM,
+				pdata->l2_office_dim);
+		ret |= adp5520_write(master, ADP5520_DARK_MAX,
+				pdata->l3_dark_max);
+		ret |= adp5520_write(master, ADP5520_DARK_DIM,
+				pdata->l3_dark_dim);
+		ret |= adp5520_write(master, ADP5520_L2_TRIP,
+				pdata->l2_trip);
+		ret |= adp5520_write(master, ADP5520_L2_HYS,
+				pdata->l2_hyst);
+		ret |= adp5520_write(master, ADP5520_L3_TRIP,
+				 pdata->l3_trip);
+		ret |= adp5520_write(master, ADP5520_L3_HYS,
+				pdata->l3_hyst);
+		ret |= adp5520_write(master, ADP5520_ALS_CMPR_CFG,
+				ALS_CMPR_CFG_VAL(pdata->abml_filt,
+				ADP5520_L3_EN));
 	}
 
-	ret |= adp5520_write(master, BL_CONTROL,
-			BL_CTRL_VAL(pdata->fade_led_law, pdata->en_ambl_sens));
+	ret |= adp5520_write(master, ADP5520_BL_CONTROL,
+			BL_CTRL_VAL(pdata->fade_led_law,
+					pdata->en_ambl_sens));
 
-	ret |= adp5520_write(master, BL_FADE, FADE_VAL(pdata->fade_in,
+	ret |= adp5520_write(master, ADP5520_BL_FADE, FADE_VAL(pdata->fade_in,
 			pdata->fade_out));
 
-	ret |= adp5520_set_bits(master, MODE_STATUS, BL_EN | DIM_EN);
+	ret |= adp5520_set_bits(master, ADP5520_MODE_STATUS,
+			ADP5520_BL_EN | ADP5520_DIM_EN);
 
 	return ret;
 }
@@ -156,29 +170,31 @@ static ssize_t adp5520_store(struct device *dev, const char *buf,
 }
 
 static ssize_t adp5520_bl_dark_max_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
+			struct device_attribute *attr, char *buf)
 {
-	return adp5520_show(dev, buf, DARK_MAX);
+	return adp5520_show(dev, buf, ADP5520_DARK_MAX);
 }
 
 static ssize_t adp5520_bl_dark_max_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
+			struct device_attribute *attr,
+			const char *buf, size_t count)
 {
-	return adp5520_store(dev, buf, count, DARK_MAX);
+	return adp5520_store(dev, buf, count, ADP5520_DARK_MAX);
 }
 static DEVICE_ATTR(dark_max, 0664, adp5520_bl_dark_max_show,
 			adp5520_bl_dark_max_store);
 
 static ssize_t adp5520_bl_office_max_show(struct device *dev,
-				     struct device_attribute *attr, char *buf)
+			struct device_attribute *attr, char *buf)
 {
-	return adp5520_show(dev, buf, OFFICE_MAX);
+	return adp5520_show(dev, buf, ADP5520_OFFICE_MAX);
 }
 
 static ssize_t adp5520_bl_office_max_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
+			struct device_attribute *attr,
+			const char *buf, size_t count)
 {
-	return adp5520_store(dev, buf, count, OFFICE_MAX);
+	return adp5520_store(dev, buf, count, ADP5520_OFFICE_MAX);
 }
 static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show,
 			adp5520_bl_office_max_store);
@@ -186,16 +202,17 @@ static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show,
 static ssize_t adp5520_bl_daylight_max_show(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	return adp5520_show(dev, buf, DAYLIGHT_MAX);
+	return adp5520_show(dev, buf, ADP5520_DAYLIGHT_MAX);
 }
 
 static ssize_t adp5520_bl_daylight_max_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
+			struct device_attribute *attr,
+			const char *buf, size_t count)
 {
 	struct adp5520_bl *data = dev_get_drvdata(dev);
 
 	strict_strtoul(buf, 10, &data->cached_daylight_max);
-	return adp5520_store(dev, buf, count, DAYLIGHT_MAX);
+	return adp5520_store(dev, buf, count, ADP5520_DAYLIGHT_MAX);
 }
 static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show,
 			adp5520_bl_daylight_max_store);
@@ -203,14 +220,14 @@ static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show,
 static ssize_t adp5520_bl_dark_dim_show(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	return adp5520_show(dev, buf, DARK_DIM);
+	return adp5520_show(dev, buf, ADP5520_DARK_DIM);
 }
 
 static ssize_t adp5520_bl_dark_dim_store(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t count)
+			struct device_attribute *attr,
+			const char *buf, size_t count)
 {
-	return adp5520_store(dev, buf, count, DARK_DIM);
+	return adp5520_store(dev, buf, count, ADP5520_DARK_DIM);
 }
 static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show,
 			adp5520_bl_dark_dim_store);
@@ -218,29 +235,29 @@ static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show,
 static ssize_t adp5520_bl_office_dim_show(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	return adp5520_show(dev, buf, OFFICE_DIM);
+	return adp5520_show(dev, buf, ADP5520_OFFICE_DIM);
 }
 
 static ssize_t adp5520_bl_office_dim_store(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t count)
+			struct device_attribute *attr,
+			const char *buf, size_t count)
 {
-	return adp5520_store(dev, buf, count, OFFICE_DIM);
+	return adp5520_store(dev, buf, count, ADP5520_OFFICE_DIM);
 }
 static DEVICE_ATTR(office_dim, 0664, adp5520_bl_office_dim_show,
 			adp5520_bl_office_dim_store);
 
 static ssize_t adp5520_bl_daylight_dim_show(struct device *dev,
-				     struct device_attribute *attr, char *buf)
+			struct device_attribute *attr, char *buf)
 {
-	return adp5520_show(dev, buf, DAYLIGHT_DIM);
+	return adp5520_show(dev, buf, ADP5520_DAYLIGHT_DIM);
 }
 
 static ssize_t adp5520_bl_daylight_dim_store(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t count)
+			struct device_attribute *attr,
+			const char *buf, size_t count)
 {
-	return adp5520_store(dev, buf, count, DAYLIGHT_DIM);
+	return adp5520_store(dev, buf, count, ADP5520_DAYLIGHT_DIM);
 }
 static DEVICE_ATTR(daylight_dim, 0664, adp5520_bl_daylight_dim_show,
 			adp5520_bl_daylight_dim_store);
@@ -316,7 +333,7 @@ static int __devexit adp5520_bl_remove(struct platform_device *pdev)
 	struct backlight_device *bl = platform_get_drvdata(pdev);
 	struct adp5520_bl *data = bl_get_data(bl);
 
-	adp5520_clr_bits(data->master, MODE_STATUS, BL_EN);
+	adp5520_clr_bits(data->master, ADP5520_MODE_STATUS, ADP5520_BL_EN);
 
 	if (data->pdata->en_ambl_sens)
 		sysfs_remove_group(&bl->dev.kobj,
diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c
index 760645d9dbb6..e3eccc9af78e 100644
--- a/drivers/video/omap/lcd_2430sdp.c
+++ b/drivers/video/omap/lcd_2430sdp.c
@@ -25,7 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <plat/mux.h>
 #include <asm/mach-types.h>
@@ -52,7 +52,7 @@ static unsigned enable_gpio;
 #define TWL4030_VPLL2_DEV_GRP           0x33
 #define TWL4030_VPLL2_DEDICATED         0x36
 
-#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v)
+#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v)
 
 
 static int sdp2430_panel_init(struct lcd_panel *panel,
diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c
index cb46556f2973..8162a40d1522 100644
--- a/drivers/watchdog/twl4030_wdt.c
+++ b/drivers/watchdog/twl4030_wdt.c
@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/miscdevice.h>
 #include <linux/uaccess.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #define TWL4030_WATCHDOG_CFG_REG_OFFS	0x3
 
@@ -48,7 +48,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
 
 static int twl4030_wdt_write(unsigned char val)
 {
-	return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, val,
+	return twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, val,
 					TWL4030_WATCHDOG_CFG_REG_OFFS);
 }