Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  wimax/i2400m: fix missing endian correction read in fw loader
  net8139: fix a race at the end of NAPI
  pktgen: Fix accuracy of inter-packet delay.
  pkt_sched: gen_estimator: add a new lock
  net: deliver skbs on inactive slaves to exact matches
  ipv6: fix ICMP6_MIB_OUTERRORS
  r8169: fix mdio_read and update mdio_write according to hw specs
  gianfar: Revive the driver for eTSEC devices (disable timestamping)
  caif: fix a couple range checks
  phylib: Add support for the LXT973 phy.
  net: Print num_rx_queues imbalance warning only when there are allocated queues

6 files changed, 63 insertions, 9 deletions

diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 9c149750e2bf..284a5f4a63ac 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -598,8 +598,8 @@ rx_next:
 			goto rx_status_loop;
 
 		spin_lock_irqsave(&cp->lock, flags);
-		cpw16_f(IntrMask, cp_intr_mask);
 		__napi_complete(napi);
+		cpw16_f(IntrMask, cp_intr_mask);
 		spin_unlock_irqrestore(&cp->lock, flags);
 	}
 
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 80cd074d3817..97d8068b372b 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -2089,8 +2089,8 @@ static int rtl8139_poll(struct napi_struct *napi, int budget)
 		 * again when we think we are done.
 		 */
 		spin_lock_irqsave(&tp->lock, flags);
-		RTL_W16_F(IntrMask, rtl8139_intr_mask);
 		__napi_complete(napi);
+		RTL_W16_F(IntrMask, rtl8139_intr_mask);
 		spin_unlock_irqrestore(&tp->lock, flags);
 	}
 	spin_unlock(&tp->rx_lock);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 1830f3199cb5..46c69cd06553 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -747,8 +747,7 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev)
 			FSL_GIANFAR_DEV_HAS_CSUM |
 			FSL_GIANFAR_DEV_HAS_VLAN |
 			FSL_GIANFAR_DEV_HAS_MAGIC_PACKET |
-			FSL_GIANFAR_DEV_HAS_EXTENDED_HASH |
-			FSL_GIANFAR_DEV_HAS_TIMER;
+			FSL_GIANFAR_DEV_HAS_EXTENDED_HASH;
 
 	ctype = of_get_property(np, "phy-connection-type", NULL);
 
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index 8ee929b796d8..dbd003453737 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -53,6 +53,9 @@
 
 #define MII_LXT971_ISR		19  /* Interrupt Status Register */
 
+/* register definitions for the 973 */
+#define MII_LXT973_PCR 16 /* Port Configuration Register */
+#define PCR_FIBER_SELECT 1
 
 MODULE_DESCRIPTION("Intel LXT PHY driver");
 MODULE_AUTHOR("Andy Fleming");
@@ -119,6 +122,33 @@ static int lxt971_config_intr(struct phy_device *phydev)
 	return err;
 }
 
+static int lxt973_probe(struct phy_device *phydev)
+{
+	int val = phy_read(phydev, MII_LXT973_PCR);
+
+	if (val & PCR_FIBER_SELECT) {
+		/*
+		 * If fiber is selected, then the only correct setting
+		 * is 100Mbps, full duplex, and auto negotiation off.
+		 */
+		val = phy_read(phydev, MII_BMCR);
+		val |= (BMCR_SPEED100 | BMCR_FULLDPLX);
+		val &= ~BMCR_ANENABLE;
+		phy_write(phydev, MII_BMCR, val);
+		/* Remember that the port is in fiber mode. */
+		phydev->priv = lxt973_probe;
+	} else {
+		phydev->priv = NULL;
+	}
+	return 0;
+}
+
+static int lxt973_config_aneg(struct phy_device *phydev)
+{
+	/* Do nothing if port is in fiber mode. */
+	return phydev->priv ? 0 : genphy_config_aneg(phydev);
+}
+
 static struct phy_driver lxt970_driver = {
 	.phy_id		= 0x78100000,
 	.name		= "LXT970",
@@ -146,6 +176,18 @@ static struct phy_driver lxt971_driver = {
 	.driver 	= { .owner = THIS_MODULE,},
 };
 
+static struct phy_driver lxt973_driver = {
+	.phy_id		= 0x00137a10,
+	.name		= "LXT973",
+	.phy_id_mask	= 0xfffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= 0,
+	.probe		= lxt973_probe,
+	.config_aneg	= lxt973_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
 static int __init lxt_init(void)
 {
 	int ret;
@@ -157,9 +199,15 @@ static int __init lxt_init(void)
 	ret = phy_driver_register(&lxt971_driver);
 	if (ret)
 		goto err2;
+
+	ret = phy_driver_register(&lxt973_driver);
+	if (ret)
+		goto err3;
 	return 0;
 
- err2:	
+ err3:
+	phy_driver_unregister(&lxt971_driver);
+ err2:
 	phy_driver_unregister(&lxt970_driver);
  err1:
 	return ret;
@@ -169,6 +217,7 @@ static void __exit lxt_exit(void)
 {
 	phy_driver_unregister(&lxt970_driver);
 	phy_driver_unregister(&lxt971_driver);
+	phy_driver_unregister(&lxt973_driver);
 }
 
 module_init(lxt_init);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 03a8318d90a2..96b6cfbf0a3a 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -560,10 +560,10 @@ static void mdio_write(void __iomem *ioaddr, int reg_addr, int value)
 		udelay(25);
 	}
 	/*
-	 * Some configurations require a small delay even after the write
-	 * completed indication or the next write might fail.
+	 * According to hardware specs a 20us delay is required after write
+	 * complete indication, but before sending next command.
 	 */
-	udelay(25);
+	udelay(20);
 }
 
 static int mdio_read(void __iomem *ioaddr, int reg_addr)
@@ -583,6 +583,12 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr)
 		}
 		udelay(25);
 	}
+	/*
+	 * According to hardware specs a 20us delay is required after read
+	 * complete indication, but before sending next command.
+	 */
+	udelay(20);
+
 	return value;
 }
 
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 3f283bff0ff7..11491354e5b5 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -1192,7 +1192,7 @@ int i2400m_fw_hdr_check(struct i2400m *i2400m,
 	unsigned module_type, header_len, major_version, minor_version,
 		module_id, module_vendor, date, size;
 
-	module_type = bcf_hdr->module_type;
+	module_type = le32_to_cpu(bcf_hdr->module_type);
 	header_len = sizeof(u32) * le32_to_cpu(bcf_hdr->header_len);
 	major_version = (le32_to_cpu(bcf_hdr->header_version) & 0xffff0000)
 		>> 16;