summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-03-26 23:03:18 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-03-26 23:03:18 +0200
commitf68d9320cd06fdec19735143b42e5197b63165b4 (patch)
tree6749bcf98762a467d1a254b9b50f462b1294050e /drivers
parente0f2e3a06be513352cb4955313ed7e55909acd84 (diff)
downloadlinux-f68d9320cd06fdec19735143b42e5197b63165b4.tar.bz2
ide: revert "ide: fix drive side 80c cable check, take 2" for now
"ide: fix drive side 80c cable check, take 2" patch from Tejun Heo (commit fab59375b9543f84d1714f7dd00f5d11e531bd3e) fixed 80c bit test (bit13 of word93) but we also need to fix master/slave IDENTIFY order (slave device should be probed first in order to make it release PDIAG- signal) and we should also check for pre-ATA3 slave devices (which may not release PDIAG- signal). [ Unfortunately the fact that IDE driver doesn't reset devices itself helps only a bit as it seems that some BIOS-es reset ATA devices after programming the chipset, some BIOS-es can be set to not probe/configure selected devices, there may be no BIOS in case of add-on cards etc. ] Since we are quite late in the release cycle and the required changes will affect a lot of systems just revert the fix for now. [ Please also see libata commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c. ] Thanks goes out to Fernando Mitio Yamada for reporting the problem and patiently testing patches. Acked-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/ide-iops.c8
1 files changed, 6 insertions, 2 deletions
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index bd513f5a2323..5523c52fee7a 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -583,8 +583,12 @@ u8 eighty_ninty_three (ide_drive_t *drive)
if(!(drive->id->hw_config & 0x4000))
return 0;
#endif /* CONFIG_IDEDMA_IVB */
- if (!(drive->id->hw_config & 0x2000))
- return 0;
+ /*
+ * FIXME:
+ * - change master/slave IDENTIFY order
+ * - force bit13 (80c cable present) check
+ * (unless the slave device is pre-ATA3)
+ */
return 1;
}