summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-02-22 12:04:05 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-02-22 12:04:05 -0800
commitbb17186a3e6d113971d8819fc52afc578d12fa67 (patch)
treee666fc9e1cd52028b1e0e841547a4ca610883d0e /drivers
parent004e390d8133b96485e1ab9af5351c2db4300c63 (diff)
parent2a4ac172c2f257d28c47b90c9e381bec31edcc44 (diff)
downloadlinux-bb17186a3e6d113971d8819fc52afc578d12fa67.tar.bz2
Merge tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH: "Here are a handful of char/misc driver fixes for 4.16-rc3. There are some binder driver fixes to resolve reported issues in stress testing the recent binder changes, some extcon driver fixes, and a few mei driver fixes and new device ids. All of these, with the exception of the mei driver id additions, have been in linux-next for a while. I forgot to push out the mei driver id additions to kernel.org until today, but all build tests pass with them enabled" * tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: me: add cannon point device ids for 4th device mei: me: add cannon point device ids mei: set device client to the disconnected state upon suspend. ANDROID: binder: synchronize_rcu() when using POLLFREE. binder: replace "%p" with "%pK" ANDROID: binder: remove WARN() for redundant txn error binder: check for binder_thread allocation failure in binder_poll() extcon: int3496: process id-pin first so that we start with the right status Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" extcon: axp288: Constify the axp288_pwr_up_down_info array
Diffstat (limited to 'drivers')
-rw-r--r--drivers/android/binder.c29
-rw-r--r--drivers/extcon/extcon-axp288.c36
-rw-r--r--drivers/extcon/extcon-intel-int3496.c3
-rw-r--r--drivers/misc/mei/bus.c6
-rw-r--r--drivers/misc/mei/client.c6
-rw-r--r--drivers/misc/mei/hw-me-regs.h5
-rw-r--r--drivers/misc/mei/pci-me.c5
7 files changed, 45 insertions, 45 deletions
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index 15e3d3c2260d..764b63a5aade 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1991,8 +1991,14 @@ static void binder_send_failed_reply(struct binder_transaction *t,
&target_thread->reply_error.work);
wake_up_interruptible(&target_thread->wait);
} else {
- WARN(1, "Unexpected reply error: %u\n",
- target_thread->reply_error.cmd);
+ /*
+ * Cannot get here for normal operation, but
+ * we can if multiple synchronous transactions
+ * are sent without blocking for responses.
+ * Just ignore the 2nd error in this case.
+ */
+ pr_warn("Unexpected reply error: %u\n",
+ target_thread->reply_error.cmd);
}
binder_inner_proc_unlock(target_thread->proc);
binder_thread_dec_tmpref(target_thread);
@@ -2193,7 +2199,7 @@ static void binder_transaction_buffer_release(struct binder_proc *proc,
int debug_id = buffer->debug_id;
binder_debug(BINDER_DEBUG_TRANSACTION,
- "%d buffer release %d, size %zd-%zd, failed at %p\n",
+ "%d buffer release %d, size %zd-%zd, failed at %pK\n",
proc->pid, buffer->debug_id,
buffer->data_size, buffer->offsets_size, failed_at);
@@ -3705,7 +3711,7 @@ static int binder_thread_write(struct binder_proc *proc,
}
}
binder_debug(BINDER_DEBUG_DEAD_BINDER,
- "%d:%d BC_DEAD_BINDER_DONE %016llx found %p\n",
+ "%d:%d BC_DEAD_BINDER_DONE %016llx found %pK\n",
proc->pid, thread->pid, (u64)cookie,
death);
if (death == NULL) {
@@ -4376,6 +4382,15 @@ static int binder_thread_release(struct binder_proc *proc,
binder_inner_proc_unlock(thread->proc);
+ /*
+ * This is needed to avoid races between wake_up_poll() above and
+ * and ep_remove_waitqueue() called for other reasons (eg the epoll file
+ * descriptor being closed); ep_remove_waitqueue() holds an RCU read
+ * lock, so we can be sure it's done after calling synchronize_rcu().
+ */
+ if (thread->looper & BINDER_LOOPER_STATE_POLL)
+ synchronize_rcu();
+
if (send_reply)
binder_send_failed_reply(send_reply, BR_DEAD_REPLY);
binder_release_work(proc, &thread->todo);
@@ -4391,6 +4406,8 @@ static __poll_t binder_poll(struct file *filp,
bool wait_for_proc_work;
thread = binder_get_thread(proc);
+ if (!thread)
+ return POLLERR;
binder_inner_proc_lock(thread->proc);
thread->looper |= BINDER_LOOPER_STATE_POLL;
@@ -5034,7 +5051,7 @@ static void print_binder_transaction_ilocked(struct seq_file *m,
spin_lock(&t->lock);
to_proc = t->to_proc;
seq_printf(m,
- "%s %d: %p from %d:%d to %d:%d code %x flags %x pri %ld r%d",
+ "%s %d: %pK from %d:%d to %d:%d code %x flags %x pri %ld r%d",
prefix, t->debug_id, t,
t->from ? t->from->proc->pid : 0,
t->from ? t->from->pid : 0,
@@ -5058,7 +5075,7 @@ static void print_binder_transaction_ilocked(struct seq_file *m,
}
if (buffer->target_node)
seq_printf(m, " node %d", buffer->target_node->debug_id);
- seq_printf(m, " size %zd:%zd data %p\n",
+ seq_printf(m, " size %zd:%zd data %pK\n",
buffer->data_size, buffer->offsets_size,
buffer->data);
}
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index 0a44d43802fe..3ec4c715e240 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -1,7 +1,6 @@
/*
* extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
*
- * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2015 Intel Corporation
* Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
*
@@ -98,15 +97,13 @@ struct axp288_extcon_info {
struct device *dev;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
- struct delayed_work det_work;
int irq[EXTCON_IRQ_END];
struct extcon_dev *edev;
unsigned int previous_cable;
- bool first_detect_done;
};
/* Power up/down reason string array */
-static char *axp288_pwr_up_down_info[] = {
+static const char * const axp288_pwr_up_down_info[] = {
"Last wake caused by user pressing the power button",
"Last wake caused by a charger insertion",
"Last wake caused by a battery insertion",
@@ -124,7 +121,7 @@ static char *axp288_pwr_up_down_info[] = {
*/
static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
{
- char **rsi;
+ const char * const *rsi;
unsigned int val, i, clear_mask = 0;
int ret;
@@ -140,25 +137,6 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
}
-static void axp288_chrg_detect_complete(struct axp288_extcon_info *info)
-{
- /*
- * We depend on other drivers to do things like mux the data lines,
- * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has
- * not set these things up correctly resulting in the initial charger
- * cable type detection giving a wrong result and we end up not charging
- * or charging at only 0.5A.
- *
- * So we schedule a second cable type detection after 2 seconds to
- * give the other drivers time to load and do their thing.
- */
- if (!info->first_detect_done) {
- queue_delayed_work(system_wq, &info->det_work,
- msecs_to_jiffies(2000));
- info->first_detect_done = true;
- }
-}
-
static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
{
int ret, stat, cfg, pwr_stat;
@@ -223,8 +201,6 @@ no_vbus:
info->previous_cable = cable;
}
- axp288_chrg_detect_complete(info);
-
return 0;
dev_det_ret:
@@ -246,11 +222,8 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
return IRQ_HANDLED;
}
-static void axp288_extcon_det_work(struct work_struct *work)
+static void axp288_extcon_enable(struct axp288_extcon_info *info)
{
- struct axp288_extcon_info *info =
- container_of(work, struct axp288_extcon_info, det_work.work);
-
regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
BC_GLOBAL_RUN, 0);
/* Enable the charger detection logic */
@@ -272,7 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev)
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
info->previous_cable = EXTCON_NONE;
- INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work);
platform_set_drvdata(pdev, info);
@@ -318,7 +290,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
}
/* Start charger cable type detection */
- queue_delayed_work(system_wq, &info->det_work, 0);
+ axp288_extcon_enable(info);
return 0;
}
diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index c8691b5a9cb0..191e99f06a9a 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -153,8 +153,9 @@ static int int3496_probe(struct platform_device *pdev)
return ret;
}
- /* queue initial processing of id-pin */
+ /* process id-pin so that we start with the right status */
queue_delayed_work(system_wq, &data->work, 0);
+ flush_delayed_work(&data->work);
platform_set_drvdata(pdev, data);
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index 3e5eabdae8d9..772d02922529 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -548,12 +548,6 @@ int mei_cldev_disable(struct mei_cl_device *cldev)
goto out;
}
- if (bus->dev_state == MEI_DEV_POWER_DOWN) {
- dev_dbg(bus->dev, "Device is powering down, don't bother with disconnection\n");
- err = 0;
- goto out;
- }
-
err = mei_cl_disconnect(cl);
if (err < 0)
dev_err(bus->dev, "Could not disconnect from the ME client\n");
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index be64969d986a..7e60c1817c31 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -945,6 +945,12 @@ int mei_cl_disconnect(struct mei_cl *cl)
return 0;
}
+ if (dev->dev_state == MEI_DEV_POWER_DOWN) {
+ cl_dbg(dev, cl, "Device is powering down, don't bother with disconnection\n");
+ mei_cl_set_disconnected(cl);
+ return 0;
+ }
+
rets = pm_runtime_get(dev->dev);
if (rets < 0 && rets != -EINPROGRESS) {
pm_runtime_put_noidle(dev->dev);
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 0ccccbaf530d..e4b10b2d1a08 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -132,6 +132,11 @@
#define MEI_DEV_ID_KBP 0xA2BA /* Kaby Point */
#define MEI_DEV_ID_KBP_2 0xA2BB /* Kaby Point 2 */
+#define MEI_DEV_ID_CNP_LP 0x9DE0 /* Cannon Point LP */
+#define MEI_DEV_ID_CNP_LP_4 0x9DE4 /* Cannon Point LP 4 (iTouch) */
+#define MEI_DEV_ID_CNP_H 0xA360 /* Cannon Point H */
+#define MEI_DEV_ID_CNP_H_4 0xA364 /* Cannon Point H 4 (iTouch) */
+
/*
* MEI HW Section
*/
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 4a0ccda4d04b..ea4e152270a3 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -98,6 +98,11 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
{MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_4, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)},
+
/* required last entry */
{0, }
};