diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-08-27 17:03:33 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-08-27 17:03:33 -0700 |
commit | c3c162635f4f064af5c1d531be6355d6b23e3d0c (patch) | |
tree | f33464b15c6baaf55e2c330ee46a88828526c158 /drivers | |
parent | fff4e7a0e680b29bb8006cc37921562ef4b8e8df (diff) | |
parent | 2c68888f1d76c668024a9efa50af382df4f3cf8e (diff) | |
download | linux-c3c162635f4f064af5c1d531be6355d6b23e3d0c.tar.bz2 |
Merge tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/iio fixes from Greg KH:
"Here are few small staging driver fixes, and some more IIO driver
fixes for 4.13-rc7. Nothing major, just resolutions for some reported
problems.
All of these have been in linux-next with no reported problems"
* tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: magnetometer: st_magn: remove ihl property for LSM303AGR
iio: magnetometer: st_magn: fix status register address for LSM303AGR
iio: hid-sensor-trigger: Fix the race with user space powering up sensors
iio: trigger: stm32-timer: fix get trigger mode
iio: imu: adis16480: Fix acceleration scale factor for adis16480
PATCH] iio: Fix some documentation warnings
staging: rtl8188eu: add RNX-N150NUB support
Revert "staging: fsl-mc: be consistent when checking strcmp() return"
iio: adc: stm32: fix common clock rate
iio: adc: ina219: Avoid underflow for sleeping time
iio: trigger: stm32-timer: add enable attribute
iio: trigger: stm32-timer: fix get/set down count direction
iio: trigger: stm32-timer: fix write_raw return value
iio: trigger: stm32-timer: fix quadrature mode get routine
iio: bmp280: properly initialize device for humidity reading
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/iio/adc/ina2xx-adc.c | 2 | ||||
-rw-r--r-- | drivers/iio/adc/stm32-adc-core.c | 10 | ||||
-rw-r--r-- | drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 8 | ||||
-rw-r--r-- | drivers/iio/imu/adis16480.c | 2 | ||||
-rw-r--r-- | drivers/iio/magnetometer/st_magn_core.c | 4 | ||||
-rw-r--r-- | drivers/iio/pressure/bmp280-core.c | 27 | ||||
-rw-r--r-- | drivers/iio/pressure/bmp280.h | 5 | ||||
-rw-r--r-- | drivers/iio/trigger/stm32-timer-trigger.c | 82 | ||||
-rw-r--r-- | drivers/staging/fsl-mc/bus/fsl-mc-allocator.c | 6 | ||||
-rw-r--r-- | drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 |
10 files changed, 104 insertions, 43 deletions
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c index 232c0b80d658..c3f86138cb55 100644 --- a/drivers/iio/adc/ina2xx-adc.c +++ b/drivers/iio/adc/ina2xx-adc.c @@ -644,7 +644,7 @@ static int ina2xx_capture_thread(void *data) { struct iio_dev *indio_dev = data; struct ina2xx_chip_info *chip = iio_priv(indio_dev); - unsigned int sampling_us = SAMPLING_PERIOD(chip); + int sampling_us = SAMPLING_PERIOD(chip); int buffer_us; /* diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c index e09233b03c05..609676384f5e 100644 --- a/drivers/iio/adc/stm32-adc-core.c +++ b/drivers/iio/adc/stm32-adc-core.c @@ -64,7 +64,7 @@ #define STM32H7_CKMODE_MASK GENMASK(17, 16) /* STM32 H7 maximum analog clock rate (from datasheet) */ -#define STM32H7_ADC_MAX_CLK_RATE 72000000 +#define STM32H7_ADC_MAX_CLK_RATE 36000000 /** * stm32_adc_common_regs - stm32 common registers, compatible dependent data @@ -148,14 +148,14 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev, return -EINVAL; } - priv->common.rate = rate; + priv->common.rate = rate / stm32f4_pclk_div[i]; val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR); val &= ~STM32F4_ADC_ADCPRE_MASK; val |= i << STM32F4_ADC_ADCPRE_SHIFT; writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR); dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n", - rate / (stm32f4_pclk_div[i] * 1000)); + priv->common.rate / 1000); return 0; } @@ -250,7 +250,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev, out: /* rate used later by each ADC instance to control BOOST mode */ - priv->common.rate = rate; + priv->common.rate = rate / div; /* Set common clock mode and prescaler */ val = readl_relaxed(priv->common.base + STM32H7_ADC_CCR); @@ -260,7 +260,7 @@ out: writel_relaxed(val, priv->common.base + STM32H7_ADC_CCR); dev_dbg(&pdev->dev, "Using %s clock/%d source at %ld kHz\n", - ckmode ? "bus" : "adc", div, rate / (div * 1000)); + ckmode ? "bus" : "adc", div, priv->common.rate / 1000); return 0; } diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c index 16ade0a0327b..0e4b379ada45 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c @@ -111,8 +111,6 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state) s32 poll_value = 0; if (state) { - if (!atomic_read(&st->user_requested_state)) - return 0; if (sensor_hub_device_open(st->hsdev)) return -EIO; @@ -161,6 +159,9 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state) &report_val); } + pr_debug("HID_SENSOR %s set power_state %d report_state %d\n", + st->pdev->name, state_val, report_val); + sensor_hub_get_feature(st->hsdev, st->power_state.report_id, st->power_state.index, sizeof(state_val), &state_val); @@ -182,6 +183,7 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state) ret = pm_runtime_get_sync(&st->pdev->dev); else { pm_runtime_mark_last_busy(&st->pdev->dev); + pm_runtime_use_autosuspend(&st->pdev->dev); ret = pm_runtime_put_autosuspend(&st->pdev->dev); } if (ret < 0) { @@ -285,8 +287,6 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name, /* Default to 3 seconds, but can be changed from sysfs */ pm_runtime_set_autosuspend_delay(&attrb->pdev->dev, 3000); - pm_runtime_use_autosuspend(&attrb->pdev->dev); - return ret; error_unreg_trigger: iio_trigger_unregister(trig); diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c index 8cf84d3488b2..12898424d838 100644 --- a/drivers/iio/imu/adis16480.c +++ b/drivers/iio/imu/adis16480.c @@ -696,7 +696,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = { .gyro_max_val = IIO_RAD_TO_DEGREE(22500), .gyro_max_scale = 450, .accel_max_val = IIO_M_S_2_TO_G(12500), - .accel_max_scale = 5, + .accel_max_scale = 10, }, [ADIS16485] = { .channels = adis16485_channels, diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 8e1b0861fbe4..c38563699984 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -356,9 +356,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { .drdy_irq = { .addr = 0x62, .mask_int1 = 0x01, - .addr_ihl = 0x63, - .mask_ihl = 0x04, - .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + .addr_stat_drdy = 0x67, }, .multi_read_bit = false, .bootime = 2, diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index d82b788374b6..0d2ea3ee371b 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -282,6 +282,11 @@ static int bmp280_read_temp(struct bmp280_data *data, } adc_temp = be32_to_cpu(tmp) >> 12; + if (adc_temp == BMP280_TEMP_SKIPPED) { + /* reading was skipped */ + dev_err(data->dev, "reading temperature skipped\n"); + return -EIO; + } comp_temp = bmp280_compensate_temp(data, adc_temp); /* @@ -317,6 +322,11 @@ static int bmp280_read_press(struct bmp280_data *data, } adc_press = be32_to_cpu(tmp) >> 12; + if (adc_press == BMP280_PRESS_SKIPPED) { + /* reading was skipped */ + dev_err(data->dev, "reading pressure skipped\n"); + return -EIO; + } comp_press = bmp280_compensate_press(data, adc_press); *val = comp_press; @@ -345,6 +355,11 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) } adc_humidity = be16_to_cpu(tmp); + if (adc_humidity == BMP280_HUMIDITY_SKIPPED) { + /* reading was skipped */ + dev_err(data->dev, "reading humidity skipped\n"); + return -EIO; + } comp_humidity = bmp280_compensate_humidity(data, adc_humidity); *val = comp_humidity; @@ -597,14 +612,20 @@ static const struct bmp280_chip_info bmp280_chip_info = { static int bme280_chip_config(struct bmp280_data *data) { - int ret = bmp280_chip_config(data); + int ret; u8 osrs = BMP280_OSRS_HUMIDITIY_X(data->oversampling_humid + 1); + /* + * Oversampling of humidity must be set before oversampling of + * temperature/pressure is set to become effective. + */ + ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_HUMIDITY, + BMP280_OSRS_HUMIDITY_MASK, osrs); + if (ret < 0) return ret; - return regmap_update_bits(data->regmap, BMP280_REG_CTRL_HUMIDITY, - BMP280_OSRS_HUMIDITY_MASK, osrs); + return bmp280_chip_config(data); } static const struct bmp280_chip_info bme280_chip_info = { diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index 2c770e13be0e..61347438b779 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -96,6 +96,11 @@ #define BME280_CHIP_ID 0x60 #define BMP280_SOFT_RESET_VAL 0xB6 +/* BMP280 register skipped special values */ +#define BMP280_TEMP_SKIPPED 0x80000 +#define BMP280_PRESS_SKIPPED 0x80000 +#define BMP280_HUMIDITY_SKIPPED 0x8000 + /* Regmap configurations */ extern const struct regmap_config bmp180_regmap_config; extern const struct regmap_config bmp280_regmap_config; diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c index d22bc56dd9fc..25ad6abfee22 100644 --- a/drivers/iio/trigger/stm32-timer-trigger.c +++ b/drivers/iio/trigger/stm32-timer-trigger.c @@ -366,34 +366,32 @@ static int stm32_counter_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct stm32_timer_trigger *priv = iio_priv(indio_dev); + u32 dat; switch (mask) { case IIO_CHAN_INFO_RAW: - { - u32 cnt; - - regmap_read(priv->regmap, TIM_CNT, &cnt); - *val = cnt; + regmap_read(priv->regmap, TIM_CNT, &dat); + *val = dat; + return IIO_VAL_INT; + case IIO_CHAN_INFO_ENABLE: + regmap_read(priv->regmap, TIM_CR1, &dat); + *val = (dat & TIM_CR1_CEN) ? 1 : 0; return IIO_VAL_INT; - } - case IIO_CHAN_INFO_SCALE: - { - u32 smcr; - regmap_read(priv->regmap, TIM_SMCR, &smcr); - smcr &= TIM_SMCR_SMS; + case IIO_CHAN_INFO_SCALE: + regmap_read(priv->regmap, TIM_SMCR, &dat); + dat &= TIM_SMCR_SMS; *val = 1; *val2 = 0; /* in quadrature case scale = 0.25 */ - if (smcr == 3) + if (dat == 3) *val2 = 2; return IIO_VAL_FRACTIONAL_LOG2; } - } return -EINVAL; } @@ -403,15 +401,31 @@ static int stm32_counter_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct stm32_timer_trigger *priv = iio_priv(indio_dev); + u32 dat; switch (mask) { case IIO_CHAN_INFO_RAW: - regmap_write(priv->regmap, TIM_CNT, val); + return regmap_write(priv->regmap, TIM_CNT, val); - return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: /* fixed scale */ return -EINVAL; + + case IIO_CHAN_INFO_ENABLE: + if (val) { + regmap_read(priv->regmap, TIM_CR1, &dat); + if (!(dat & TIM_CR1_CEN)) + clk_enable(priv->clk); + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, + TIM_CR1_CEN); + } else { + regmap_read(priv->regmap, TIM_CR1, &dat); + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, + 0); + if (dat & TIM_CR1_CEN) + clk_disable(priv->clk); + } + return 0; } return -EINVAL; @@ -471,7 +485,7 @@ static int stm32_get_trigger_mode(struct iio_dev *indio_dev, regmap_read(priv->regmap, TIM_SMCR, &smcr); - return smcr == TIM_SMCR_SMS ? 0 : -EINVAL; + return (smcr & TIM_SMCR_SMS) == TIM_SMCR_SMS ? 0 : -EINVAL; } static const struct iio_enum stm32_trigger_mode_enum = { @@ -507,9 +521,19 @@ static int stm32_set_enable_mode(struct iio_dev *indio_dev, { struct stm32_timer_trigger *priv = iio_priv(indio_dev); int sms = stm32_enable_mode2sms(mode); + u32 val; if (sms < 0) return sms; + /* + * Triggered mode sets CEN bit automatically by hardware. So, first + * enable counter clock, so it can use it. Keeps it in sync with CEN. + */ + if (sms == 6) { + regmap_read(priv->regmap, TIM_CR1, &val); + if (!(val & TIM_CR1_CEN)) + clk_enable(priv->clk); + } regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms); @@ -571,11 +595,14 @@ static int stm32_get_quadrature_mode(struct iio_dev *indio_dev, { struct stm32_timer_trigger *priv = iio_priv(indio_dev); u32 smcr; + int mode; regmap_read(priv->regmap, TIM_SMCR, &smcr); - smcr &= TIM_SMCR_SMS; + mode = (smcr & TIM_SMCR_SMS) - 1; + if ((mode < 0) || (mode > ARRAY_SIZE(stm32_quadrature_modes))) + return -EINVAL; - return smcr - 1; + return mode; } static const struct iio_enum stm32_quadrature_mode_enum = { @@ -592,13 +619,20 @@ static const char *const stm32_count_direction_states[] = { static int stm32_set_count_direction(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, - unsigned int mode) + unsigned int dir) { struct stm32_timer_trigger *priv = iio_priv(indio_dev); + u32 val; + int mode; - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_DIR, mode); + /* In encoder mode, direction is RO (given by TI1/TI2 signals) */ + regmap_read(priv->regmap, TIM_SMCR, &val); + mode = (val & TIM_SMCR_SMS) - 1; + if ((mode >= 0) || (mode < ARRAY_SIZE(stm32_quadrature_modes))) + return -EBUSY; - return 0; + return regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_DIR, + dir ? TIM_CR1_DIR : 0); } static int stm32_get_count_direction(struct iio_dev *indio_dev, @@ -609,7 +643,7 @@ static int stm32_get_count_direction(struct iio_dev *indio_dev, regmap_read(priv->regmap, TIM_CR1, &cr1); - return (cr1 & TIM_CR1_DIR); + return ((cr1 & TIM_CR1_DIR) ? 1 : 0); } static const struct iio_enum stm32_count_direction_enum = { @@ -672,7 +706,9 @@ static const struct iio_chan_spec_ext_info stm32_trigger_count_info[] = { static const struct iio_chan_spec stm32_trigger_channel = { .type = IIO_COUNT, .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_ENABLE) | + BIT(IIO_CHAN_INFO_SCALE), .ext_info = stm32_trigger_count_info, .indexed = 1 }; diff --git a/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c b/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c index b37a6f48225f..8ea3920400a0 100644 --- a/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c +++ b/drivers/staging/fsl-mc/bus/fsl-mc-allocator.c @@ -16,9 +16,9 @@ static bool __must_check fsl_mc_is_allocatable(const char *obj_type) { - return strcmp(obj_type, "dpbp") || - strcmp(obj_type, "dpmcp") || - strcmp(obj_type, "dpcon"); + return strcmp(obj_type, "dpbp") == 0 || + strcmp(obj_type, "dpmcp") == 0 || + strcmp(obj_type, "dpcon") == 0; } /** diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c index d283341cfe43..56cd4e5e51b2 100644 --- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c +++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c @@ -45,6 +45,7 @@ static struct usb_device_id rtw_usb_id_tbl[] = { {USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */ {USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */ {USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */ + {USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill RNX-N150NUB */ {} /* Terminating entry */ }; |