summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorSergei Shtylyov <sshtylyov@ru.mvista.com>2010-12-25 22:44:01 +0300
committerJeff Garzik <jgarzik@redhat.com>2011-01-07 22:33:10 -0500
commit8e834c2e6d51e053c6bd23fec1d95529f618f760 (patch)
tree8d4441b90f880c2d7cd4d5ef1799bfb9fa50ba16 /drivers
parentb27dcfb0670ea7352a67137f4ff7947c2a9f6892 (diff)
downloadlinux-8e834c2e6d51e053c6bd23fec1d95529f618f760.tar.bz2
pata_hpt{37x|3x2n}: SATA mode filtering
The Marvell bridge chips used on HighPoint SATA cards do not seem to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes; these cards are based on HPT372/372A/372N/374 chips (judging from the vendor drivers), so the Linux drivers need to have a mode_filter() method for these chips... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/pata_hpt37x.c54
-rw-r--r--drivers/ata/pata_hpt3x2n.c61
2 files changed, 93 insertions, 22 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 9ae4c0830577..9c62951c3e26 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -8,7 +8,7 @@
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2010 MontaVista Software, Inc.
*
* TODO
* Look into engine reset on timeout errors. Should not be required.
@@ -24,7 +24,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.15"
+#define DRV_VERSION "0.6.16"
struct hpt_clock {
u8 xfer_speed;
@@ -302,6 +302,22 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
}
/**
+ * hpt372_filter - mode selection filter
+ * @adev: ATA device
+ * @mask: mode mask
+ *
+ * The Marvell bridge chips used on the HighPoint SATA cards do not seem
+ * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
+ */
+static unsigned long hpt372_filter(struct ata_device *adev, unsigned long mask)
+{
+ if (ata_id_is_sata(adev->id))
+ mask &= ~((0xE << ATA_SHIFT_UDMA) | ATA_MASK_MWDMA);
+
+ return mask;
+}
+
+/**
* hpt37x_cable_detect - Detect the cable type
* @ap: ATA port to detect on
*
@@ -586,11 +602,11 @@ static struct ata_port_operations hpt370a_port_ops = {
};
/*
- * Configuration for HPT372, HPT371, HPT302. Slightly different PIO
- * and DMA mode setting functionality.
+ * Configuration for HPT371 and HPT302. Slightly different PIO and DMA
+ * mode setting functionality.
*/
-static struct ata_port_operations hpt372_port_ops = {
+static struct ata_port_operations hpt302_port_ops = {
.inherits = &ata_bmdma_port_ops,
.bmdma_stop = hpt37x_bmdma_stop,
@@ -602,7 +618,17 @@ static struct ata_port_operations hpt372_port_ops = {
};
/*
- * Configuration for HPT374. Mode setting works like 372 and friends
+ * Configuration for HPT372. Mode setting works like 371 and 302
+ * but we have a mode filter.
+ */
+
+static struct ata_port_operations hpt372_port_ops = {
+ .inherits = &hpt302_port_ops,
+ .mode_filter = hpt372_filter,
+};
+
+/*
+ * Configuration for HPT374. Mode setting and filtering works like 372
* but we have a different cable detection procedure for function 1.
*/
@@ -753,7 +779,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA5,
.port_ops = &hpt370a_port_ops
};
- /* HPT371, 372 and friends - UDMA133 */
+ /* HPT372 - UDMA133 */
static const struct ata_port_info info_hpt372 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
@@ -761,6 +787,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA6,
.port_ops = &hpt372_port_ops
};
+ /* HPT371, 302 - UDMA133 */
+ static const struct ata_port_info info_hpt302 = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &hpt302_port_ops
+ };
/* HPT374 - UDMA100, function 1 uses different prereset method */
static const struct ata_port_info info_hpt374_fn0 = {
.flags = ATA_FLAG_SLAVE_POSS,
@@ -828,7 +862,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
} else {
switch(dev->device) {
case PCI_DEVICE_ID_TTI_HPT372:
- /* 372N if rev >= 2*/
+ /* 372N if rev >= 2 */
if (rev >= 2)
return -ENODEV;
ppi[0] = &info_hpt372;
@@ -838,14 +872,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* 302N if rev > 1 */
if (rev > 1)
return -ENODEV;
- ppi[0] = &info_hpt372;
+ ppi[0] = &info_hpt302;
/* Check this */
chip_table = &hpt302;
break;
case PCI_DEVICE_ID_TTI_HPT371:
if (rev > 1)
return -ENODEV;
- ppi[0] = &info_hpt372;
+ ppi[0] = &info_hpt302;
chip_table = &hpt371;
/* Single channel device, master is not present
but the BIOS (or us for non x86) must mark it
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 32f3463216b8..97c6ded047b8 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -8,7 +8,7 @@
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2010 MontaVista Software, Inc.
*
*
* TODO
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.10"
+#define DRV_VERSION "0.3.11"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -113,6 +113,22 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed)
}
/**
+ * hpt372n_filter - mode selection filter
+ * @adev: ATA device
+ * @mask: mode mask
+ *
+ * The Marvell bridge chips used on the HighPoint SATA cards do not seem
+ * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
+ */
+static unsigned long hpt372n_filter(struct ata_device *adev, unsigned long mask)
+{
+ if (ata_id_is_sata(adev->id))
+ mask &= ~((0xE << ATA_SHIFT_UDMA) | ATA_MASK_MWDMA);
+
+ return mask;
+}
+
+/**
* hpt3x2n_cable_detect - Detect the cable type
* @ap: ATA port to detect on
*
@@ -328,10 +344,10 @@ static struct scsi_host_template hpt3x2n_sht = {
};
/*
- * Configuration for HPT3x2n.
+ * Configuration for HPT302N/371N.
*/
-static struct ata_port_operations hpt3x2n_port_ops = {
+static struct ata_port_operations hpt3xxn_port_ops = {
.inherits = &ata_bmdma_port_ops,
.bmdma_stop = hpt3x2n_bmdma_stop,
@@ -345,6 +361,15 @@ static struct ata_port_operations hpt3x2n_port_ops = {
.prereset = hpt3x2n_pre_reset,
};
+/*
+ * Configuration for HPT372N. Same as 302N/371N but we have a mode filter.
+ */
+
+static struct ata_port_operations hpt372n_port_ops = {
+ .inherits = &hpt3xxn_port_ops,
+ .mode_filter = &hpt372n_filter,
+};
+
/**
* hpt3xn_calibrate_dpll - Calibrate the DPLL loop
* @dev: PCI device
@@ -437,15 +462,23 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- /* HPT372N and friends - UDMA133 */
- static const struct ata_port_info info = {
+ /* HPT372N - UDMA133 */
+ static const struct ata_port_info info_hpt372n = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
- .port_ops = &hpt3x2n_port_ops
+ .port_ops = &hpt372n_port_ops
};
- const struct ata_port_info *ppi[] = { &info, NULL };
+ /* HPT302N and HPT371N - UDMA133 */
+ static const struct ata_port_info info_hpt3xxn = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &hpt3xxn_port_ops
+ };
+ const struct ata_port_info *ppi[] = { &info_hpt3xxn, NULL };
u8 rev = dev->revision;
u8 irqmask;
unsigned int pci_mhz;
@@ -461,24 +494,28 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
switch(dev->device) {
case PCI_DEVICE_ID_TTI_HPT366:
+ /* 372N if rev >= 6 */
if (rev < 6)
return -ENODEV;
- break;
+ goto hpt372n;
case PCI_DEVICE_ID_TTI_HPT371:
+ /* 371N if rev >= 2 */
if (rev < 2)
return -ENODEV;
- /* 371N if rev > 1 */
break;
case PCI_DEVICE_ID_TTI_HPT372:
- /* 372N if rev >= 2*/
+ /* 372N if rev >= 2 */
if (rev < 2)
return -ENODEV;
- break;
+ goto hpt372n;
case PCI_DEVICE_ID_TTI_HPT302:
+ /* 302N if rev >= 2 */
if (rev < 2)
return -ENODEV;
break;
case PCI_DEVICE_ID_TTI_HPT372N:
+hpt372n:
+ ppi[0] = &info_hpt372n;
break;
default:
printk(KERN_ERR "pata_hpt3x2n: PCI table is bogus please report (%d).\n", dev->device);