diff options
author | Jens Axboe <axboe@fb.com> | 2017-06-08 08:33:45 -0600 |
---|---|---|
committer | Jens Axboe <axboe@fb.com> | 2017-06-08 08:33:45 -0600 |
commit | 85d0331aedff4646b2a2b14561c8be3678ffcee2 (patch) | |
tree | 0ae7f21b848758bf809385c773529cbbe76c1fb4 /drivers | |
parent | 6460495709aeb651896bc8e5c134b2e4ca7d34a8 (diff) | |
parent | 9947d6a09cd71937dade2fc14640e4843ae19802 (diff) | |
download | linux-85d0331aedff4646b2a2b14561c8be3678ffcee2.tar.bz2 |
Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into for-linus
Christoph writes:
"A few NVMe fixes for 4.12-rc, PCIe reset fixes and APST fixes, a
RDMA reconnect fix, two FC fixes and a general controller removal fix."
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/nvme/host/core.c | 21 | ||||
-rw-r--r-- | drivers/nvme/host/fc.c | 20 | ||||
-rw-r--r-- | drivers/nvme/host/pci.c | 13 | ||||
-rw-r--r-- | drivers/nvme/host/rdma.c | 44 |
4 files changed, 67 insertions, 31 deletions
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index a60926410438..903d5813023a 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -56,7 +56,7 @@ MODULE_PARM_DESC(max_retries, "max number of retries a command may have"); static int nvme_char_major; module_param(nvme_char_major, int, 0); -static unsigned long default_ps_max_latency_us = 25000; +static unsigned long default_ps_max_latency_us = 100000; module_param(default_ps_max_latency_us, ulong, 0644); MODULE_PARM_DESC(default_ps_max_latency_us, "max power saving latency for new devices; use PM QOS to change per device"); @@ -1342,7 +1342,7 @@ static void nvme_configure_apst(struct nvme_ctrl *ctrl) * transitioning between power states. Therefore, when running * in any given state, we will enter the next lower-power * non-operational state after waiting 50 * (enlat + exlat) - * microseconds, as long as that state's total latency is under + * microseconds, as long as that state's exit latency is under * the requested maximum latency. * * We will not autonomously enter any non-operational state for @@ -1387,7 +1387,7 @@ static void nvme_configure_apst(struct nvme_ctrl *ctrl) * lowest-power state, not the number of states. */ for (state = (int)ctrl->npss; state >= 0; state--) { - u64 total_latency_us, transition_ms; + u64 total_latency_us, exit_latency_us, transition_ms; if (target) table->entries[state] = target; @@ -1408,12 +1408,15 @@ static void nvme_configure_apst(struct nvme_ctrl *ctrl) NVME_PS_FLAGS_NON_OP_STATE)) continue; - total_latency_us = - (u64)le32_to_cpu(ctrl->psd[state].entry_lat) + - + le32_to_cpu(ctrl->psd[state].exit_lat); - if (total_latency_us > ctrl->ps_max_latency_us) + exit_latency_us = + (u64)le32_to_cpu(ctrl->psd[state].exit_lat); + if (exit_latency_us > ctrl->ps_max_latency_us) continue; + total_latency_us = + exit_latency_us + + le32_to_cpu(ctrl->psd[state].entry_lat); + /* * This state is good. Use it as the APST idle * target for higher power states. @@ -2438,6 +2441,10 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl) struct nvme_ns *ns; mutex_lock(&ctrl->namespaces_mutex); + + /* Forcibly start all queues to avoid having stuck requests */ + blk_mq_start_hw_queues(ctrl->admin_q); + list_for_each_entry(ns, &ctrl->namespaces, list) { /* * Revalidating a dead namespace sets capacity to 0. This will diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 5b14cbefb724..92964cef0f4b 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -1139,6 +1139,7 @@ nvme_fc_xmt_disconnect_assoc(struct nvme_fc_ctrl *ctrl) /* *********************** NVME Ctrl Routines **************************** */ static void __nvme_fc_final_op_cleanup(struct request *rq); +static void nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg); static int nvme_fc_reinit_request(void *data, struct request *rq) @@ -1265,7 +1266,7 @@ nvme_fc_fcpio_done(struct nvmefc_fcp_req *req) struct nvme_command *sqe = &op->cmd_iu.sqe; __le16 status = cpu_to_le16(NVME_SC_SUCCESS << 1); union nvme_result result; - bool complete_rq; + bool complete_rq, terminate_assoc = true; /* * WARNING: @@ -1294,6 +1295,14 @@ nvme_fc_fcpio_done(struct nvmefc_fcp_req *req) * fabricate a CQE, the following fields will not be set as they * are not referenced: * cqe.sqid, cqe.sqhd, cqe.command_id + * + * Failure or error of an individual i/o, in a transport + * detected fashion unrelated to the nvme completion status, + * potentially cause the initiator and target sides to get out + * of sync on SQ head/tail (aka outstanding io count allowed). + * Per FC-NVME spec, failure of an individual command requires + * the connection to be terminated, which in turn requires the + * association to be terminated. */ fc_dma_sync_single_for_cpu(ctrl->lport->dev, op->fcp_req.rspdma, @@ -1359,6 +1368,8 @@ nvme_fc_fcpio_done(struct nvmefc_fcp_req *req) goto done; } + terminate_assoc = false; + done: if (op->flags & FCOP_FLAGS_AEN) { nvme_complete_async_event(&queue->ctrl->ctrl, status, &result); @@ -1366,7 +1377,7 @@ done: atomic_set(&op->state, FCPOP_STATE_IDLE); op->flags = FCOP_FLAGS_AEN; /* clear other flags */ nvme_fc_ctrl_put(ctrl); - return; + goto check_error; } complete_rq = __nvme_fc_fcpop_chk_teardowns(ctrl, op); @@ -1379,6 +1390,10 @@ done: nvme_end_request(rq, status, result); } else __nvme_fc_final_op_cleanup(rq); + +check_error: + if (terminate_assoc) + nvme_fc_error_recovery(ctrl, "transport detected io error"); } static int @@ -2791,6 +2806,7 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, ctrl->ctrl.opts = NULL; /* initiate nvme ctrl ref counting teardown */ nvme_uninit_ctrl(&ctrl->ctrl); + nvme_put_ctrl(&ctrl->ctrl); /* as we're past the point where we transition to the ref * counting teardown path, if we return a bad pointer here, diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index d52701df7245..951042a375d6 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1367,7 +1367,7 @@ static bool nvme_should_reset(struct nvme_dev *dev, u32 csts) bool nssro = dev->subsystem && (csts & NVME_CSTS_NSSRO); /* If there is a reset ongoing, we shouldn't reset again. */ - if (work_busy(&dev->reset_work)) + if (dev->ctrl.state == NVME_CTRL_RESETTING) return false; /* We shouldn't reset unless the controller is on fatal error state @@ -1903,7 +1903,7 @@ static void nvme_reset_work(struct work_struct *work) bool was_suspend = !!(dev->ctrl.ctrl_config & NVME_CC_SHN_NORMAL); int result = -ENODEV; - if (WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)) + if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)) goto out; /* @@ -1913,9 +1913,6 @@ static void nvme_reset_work(struct work_struct *work) if (dev->ctrl.ctrl_config & NVME_CC_ENABLE) nvme_dev_disable(dev, false); - if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING)) - goto out; - result = nvme_pci_enable(dev); if (result) goto out; @@ -2009,8 +2006,8 @@ static int nvme_reset(struct nvme_dev *dev) { if (!dev->ctrl.admin_q || blk_queue_dying(dev->ctrl.admin_q)) return -ENODEV; - if (work_busy(&dev->reset_work)) - return -ENODEV; + if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING)) + return -EBUSY; if (!queue_work(nvme_workq, &dev->reset_work)) return -EBUSY; return 0; @@ -2136,6 +2133,7 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (result) goto release_pools; + nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING); dev_info(dev->ctrl.device, "pci function %s\n", dev_name(&pdev->dev)); queue_work(nvme_workq, &dev->reset_work); @@ -2179,6 +2177,7 @@ static void nvme_remove(struct pci_dev *pdev) nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING); + cancel_work_sync(&dev->reset_work); pci_set_drvdata(pdev, NULL); if (!pci_device_is_present(pdev)) { diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 28bd255c144d..24397d306d53 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -753,28 +753,26 @@ static void nvme_rdma_reconnect_ctrl_work(struct work_struct *work) if (ret) goto requeue; - blk_mq_start_stopped_hw_queues(ctrl->ctrl.admin_q, true); - ret = nvmf_connect_admin_queue(&ctrl->ctrl); if (ret) - goto stop_admin_q; + goto requeue; set_bit(NVME_RDMA_Q_LIVE, &ctrl->queues[0].flags); ret = nvme_enable_ctrl(&ctrl->ctrl, ctrl->cap); if (ret) - goto stop_admin_q; + goto requeue; nvme_start_keep_alive(&ctrl->ctrl); if (ctrl->queue_count > 1) { ret = nvme_rdma_init_io_queues(ctrl); if (ret) - goto stop_admin_q; + goto requeue; ret = nvme_rdma_connect_io_queues(ctrl); if (ret) - goto stop_admin_q; + goto requeue; } changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE); @@ -782,7 +780,6 @@ static void nvme_rdma_reconnect_ctrl_work(struct work_struct *work) ctrl->ctrl.opts->nr_reconnects = 0; if (ctrl->queue_count > 1) { - nvme_start_queues(&ctrl->ctrl); nvme_queue_scan(&ctrl->ctrl); nvme_queue_async_events(&ctrl->ctrl); } @@ -791,8 +788,6 @@ static void nvme_rdma_reconnect_ctrl_work(struct work_struct *work) return; -stop_admin_q: - blk_mq_stop_hw_queues(ctrl->ctrl.admin_q); requeue: dev_info(ctrl->ctrl.device, "Failed reconnect attempt %d\n", ctrl->ctrl.opts->nr_reconnects); @@ -823,6 +818,13 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work) blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_cancel_request, &ctrl->ctrl); + /* + * queues are not a live anymore, so restart the queues to fail fast + * new IO + */ + blk_mq_start_stopped_hw_queues(ctrl->ctrl.admin_q, true); + nvme_start_queues(&ctrl->ctrl); + nvme_rdma_reconnect_or_remove(ctrl); } @@ -1433,7 +1435,7 @@ nvme_rdma_timeout(struct request *rq, bool reserved) /* * We cannot accept any other command until the Connect command has completed. */ -static inline bool nvme_rdma_queue_is_ready(struct nvme_rdma_queue *queue, +static inline int nvme_rdma_queue_is_ready(struct nvme_rdma_queue *queue, struct request *rq) { if (unlikely(!test_bit(NVME_RDMA_Q_LIVE, &queue->flags))) { @@ -1441,11 +1443,22 @@ static inline bool nvme_rdma_queue_is_ready(struct nvme_rdma_queue *queue, if (!blk_rq_is_passthrough(rq) || cmd->common.opcode != nvme_fabrics_command || - cmd->fabrics.fctype != nvme_fabrics_type_connect) - return false; + cmd->fabrics.fctype != nvme_fabrics_type_connect) { + /* + * reconnecting state means transport disruption, which + * can take a long time and even might fail permanently, + * so we can't let incoming I/O be requeued forever. + * fail it fast to allow upper layers a chance to + * failover. + */ + if (queue->ctrl->ctrl.state == NVME_CTRL_RECONNECTING) + return -EIO; + else + return -EAGAIN; + } } - return true; + return 0; } static int nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, @@ -1463,8 +1476,9 @@ static int nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, WARN_ON_ONCE(rq->tag < 0); - if (!nvme_rdma_queue_is_ready(queue, rq)) - return BLK_MQ_RQ_QUEUE_BUSY; + ret = nvme_rdma_queue_is_ready(queue, rq); + if (unlikely(ret)) + goto err; dev = queue->device->dev; ib_dma_sync_single_for_cpu(dev, sqe->dma, |