Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-03-02

Here's the first bluetooth-next pull request targeting the 4.1 kernel:

 - ieee802154/6lowpan cleanups
 - SCO routing to host interface support for the btmrvl driver
 - AMP code cleanups
 - Fixes to AMP HCI init sequence
 - Refactoring of the HCI callback mechanism
 - Added shutdown routine for Intel controllers in the btusb driver
 - New config option to enable/disable Bluetooth debugfs information
 - Fix for early data reception on L2CAP fixed channels

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 183 insertions, 73 deletions

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index de4c8499cbac..288547a3c566 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -65,6 +65,7 @@ static const struct usb_device_id ath3k_table[] = {
 	/* Atheros AR3011 with sflash firmware*/
 	{ USB_DEVICE(0x0489, 0xE027) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
+	{ USB_DEVICE(0x04F2, 0xAFF1) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0CF3, 0x3002) },
 	{ USB_DEVICE(0x0CF3, 0xE019) },
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index e75f8ee2512c..086f0ec89580 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -111,6 +111,7 @@ struct btmrvl_private {
 
 /* Vendor specific Bluetooth commands */
 #define BT_CMD_PSCAN_WIN_REPORT_ENABLE	0xFC03
+#define BT_CMD_ROUTE_SCO_TO_HOST	0xFC1D
 #define BT_CMD_SET_BDADDR		0xFC22
 #define BT_CMD_AUTO_SLEEP_MODE		0xFC23
 #define BT_CMD_HOST_SLEEP_CONFIG	0xFC59
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 413597789c61..de05deb444ce 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -230,6 +230,18 @@ int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd)
 }
 EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
 
+static int btmrvl_enable_sco_routing_to_host(struct btmrvl_private *priv)
+{
+	int ret;
+	u8 subcmd = 0;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_ROUTE_SCO_TO_HOST, &subcmd, 1);
+	if (ret)
+		BT_ERR("BT_CMD_ROUTE_SCO_TO_HOST command failed: %#x", ret);
+
+	return ret;
+}
+
 int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd)
 {
 	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
@@ -558,6 +570,8 @@ static int btmrvl_setup(struct hci_dev *hdev)
 
 	btmrvl_check_device_tree(priv);
 
+	btmrvl_enable_sco_routing_to_host(priv);
+
 	btmrvl_pscan_window_reporting(priv, 0x01);
 
 	priv->btmrvl_dev.psmode = 1;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b87688881143..3ca2e1bf7bfa 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -159,6 +159,7 @@ static const struct usb_device_id blacklist_table[] = {
 	/* Atheros 3011 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
@@ -338,16 +339,6 @@ struct btusb_data {
 	int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
 };
 
-static int btusb_wait_on_bit_timeout(void *word, int bit, unsigned long timeout,
-				     unsigned mode)
-{
-	might_sleep();
-	if (!test_bit(bit, word))
-		return 0;
-	return out_of_line_wait_on_bit_timeout(word, bit, bit_wait_timeout,
-					       mode, timeout);
-}
-
 static inline void btusb_free_frags(struct btusb_data *data)
 {
 	unsigned long flags;
@@ -2196,9 +2187,9 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 * and thus just timeout if that happens and fail the setup
 	 * of this device.
 	 */
-	err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
-					msecs_to_jiffies(5000),
-					TASK_INTERRUPTIBLE);
+	err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(5000));
 	if (err == 1) {
 		BT_ERR("%s: Firmware loading interrupted", hdev->name);
 		err = -EINTR;
@@ -2249,9 +2240,9 @@ done:
 	 */
 	BT_INFO("%s: Waiting for device to boot", hdev->name);
 
-	err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
-					msecs_to_jiffies(1000),
-					TASK_INTERRUPTIBLE);
+	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(1000));
 
 	if (err == 1) {
 		BT_ERR("%s: Device boot interrupted", hdev->name);
@@ -2331,6 +2322,27 @@ static int btusb_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 	return 0;
 }
 
+static int btusb_shutdown_intel(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	long ret;
+
+	/* Some platforms have an issue with BT LED when the interface is
+	 * down or BT radio is turned off, which takes 5 seconds to BT LED
+	 * goes off. This command turns off the BT LED immediately.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		BT_ERR("%s: turning off Intel device LED failed (%ld)",
+		       hdev->name, ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
 static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
 				    const bdaddr_t *bdaddr)
 {
@@ -2354,6 +2366,23 @@ static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
 	return 0;
 }
 
+static const struct {
+	u16 subver;
+	const char *name;
+} bcm_subver_table[] = {
+	{ 0x210b, "BCM43142A0"	},	/* 001.001.011 */
+	{ 0x2112, "BCM4314A0"	},	/* 001.001.018 */
+	{ 0x2118, "BCM20702A0"	},	/* 001.001.024 */
+	{ 0x2126, "BCM4335A0"	},	/* 001.001.038 */
+	{ 0x220e, "BCM20702A1"	},	/* 001.002.014 */
+	{ 0x230f, "BCM4354A2"	},	/* 001.003.015 */
+	{ 0x4106, "BCM4335B0"	},	/* 002.001.006 */
+	{ 0x410e, "BCM20702B0"	},	/* 002.001.014 */
+	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
+	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
+	{ }
+};
+
 #define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
 
 static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
@@ -2366,29 +2395,20 @@ static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
 	size_t fw_size;
 	const struct hci_command_hdr *cmd;
 	const u8 *cmd_param;
-	u16 opcode;
+	u16 opcode, subver, rev;
+	const char *hw_name = NULL;
 	struct sk_buff *skb;
 	struct hci_rp_read_local_version *ver;
 	struct hci_rp_read_bd_addr *bda;
 	long ret;
-
-	snprintf(fw_name, sizeof(fw_name), "brcm/%s-%04x-%04x.hcd",
-		 udev->product ? udev->product : "BCM",
-		 le16_to_cpu(udev->descriptor.idVendor),
-		 le16_to_cpu(udev->descriptor.idProduct));
-
-	ret = request_firmware(&fw, fw_name, &hdev->dev);
-	if (ret < 0) {
-		BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
-		return 0;
-	}
+	int i;
 
 	/* Reset */
 	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
 	if (IS_ERR(skb)) {
 		ret = PTR_ERR(skb);
 		BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret);
-		goto done;
+		return ret;
 	}
 	kfree_skb(skb);
 
@@ -2399,23 +2419,43 @@ static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
 		ret = PTR_ERR(skb);
 		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
 		       hdev->name, ret);
-		goto done;
+		return ret;
 	}
 
 	if (skb->len != sizeof(*ver)) {
 		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
 		       hdev->name);
 		kfree_skb(skb);
-		ret = -EIO;
-		goto done;
+		return -EIO;
 	}
 
 	ver = (struct hci_rp_read_local_version *)skb->data;
-	BT_INFO("%s: BCM: patching hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
-		"lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev,
-		ver->lmp_ver, ver->lmp_subver);
+	rev = le16_to_cpu(ver->hci_rev);
+	subver = le16_to_cpu(ver->lmp_subver);
 	kfree_skb(skb);
 
+	for (i = 0; bcm_subver_table[i].name; i++) {
+		if (subver == bcm_subver_table[i].subver) {
+			hw_name = bcm_subver_table[i].name;
+			break;
+		}
+	}
+
+	BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+		hw_name ? : "BCM", (subver & 0x7000) >> 13,
+		(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+	snprintf(fw_name, sizeof(fw_name), "brcm/%s-%4.4x-%4.4x.hcd",
+		 hw_name ? : "BCM",
+		 le16_to_cpu(udev->descriptor.idVendor),
+		 le16_to_cpu(udev->descriptor.idProduct));
+
+	ret = request_firmware(&fw, fw_name, &hdev->dev);
+	if (ret < 0) {
+		BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
+		return 0;
+	}
+
 	/* Start Download */
 	skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
 	if (IS_ERR(skb)) {
@@ -2493,11 +2533,14 @@ reset_fw:
 	}
 
 	ver = (struct hci_rp_read_local_version *)skb->data;
-	BT_INFO("%s: BCM: firmware hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
-		"lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev,
-		ver->lmp_ver, ver->lmp_subver);
+	rev = le16_to_cpu(ver->hci_rev);
+	subver = le16_to_cpu(ver->lmp_subver);
 	kfree_skb(skb);
 
+	BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+		hw_name ? : "BCM", (subver & 0x7000) >> 13,
+		(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
 	/* Read BD Address */
 	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
 			     HCI_INIT_TIMEOUT);
@@ -2708,6 +2751,7 @@ static int btusb_probe(struct usb_interface *intf,
 
 	if (id->driver_info & BTUSB_INTEL) {
 		hdev->setup = btusb_setup_intel;
+		hdev->shutdown = btusb_shutdown_intel;
 		hdev->set_bdaddr = btusb_set_bdaddr_intel;
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 	}
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 7b051eacb7f1..1d438bc54189 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -46,8 +46,6 @@ struct at86rf2xx_chip_data {
 	u16 t_off_to_tx_on;
 	u16 t_frame;
 	u16 t_p_ack;
-	/* completion timeout for tx in msecs */
-	u16 t_tx_timeout;
 	int rssi_base_val;
 
 	int (*set_channel)(struct at86rf230_local *, u8, u8);
@@ -689,7 +687,7 @@ at86rf230_sync_state_change_complete(void *context)
 static int
 at86rf230_sync_state_change(struct at86rf230_local *lp, unsigned int state)
 {
-	int rc;
+	unsigned long rc;
 
 	at86rf230_async_state_change(lp, &lp->state, state,
 				     at86rf230_sync_state_change_complete,
@@ -1281,7 +1279,6 @@ static struct at86rf2xx_chip_data at86rf233_data = {
 	.t_off_to_tx_on = 80,
 	.t_frame = 4096,
 	.t_p_ack = 545,
-	.t_tx_timeout = 2000,
 	.rssi_base_val = -91,
 	.set_channel = at86rf23x_set_channel,
 	.get_desense_steps = at86rf23x_get_desens_steps
@@ -1295,7 +1292,6 @@ static struct at86rf2xx_chip_data at86rf231_data = {
 	.t_off_to_tx_on = 110,
 	.t_frame = 4096,
 	.t_p_ack = 545,
-	.t_tx_timeout = 2000,
 	.rssi_base_val = -91,
 	.set_channel = at86rf23x_set_channel,
 	.get_desense_steps = at86rf23x_get_desens_steps
@@ -1309,13 +1305,12 @@ static struct at86rf2xx_chip_data at86rf212_data = {
 	.t_off_to_tx_on = 200,
 	.t_frame = 4096,
 	.t_p_ack = 545,
-	.t_tx_timeout = 2000,
 	.rssi_base_val = -100,
 	.set_channel = at86rf212_set_channel,
 	.get_desense_steps = at86rf212_get_desens_steps
 };
 
-static int at86rf230_hw_init(struct at86rf230_local *lp)
+static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
 {
 	int rc, irq_type, irq_pol = IRQ_ACTIVE_HIGH;
 	unsigned int dvdd;
@@ -1326,7 +1321,12 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 		return rc;
 
 	irq_type = irq_get_trigger_type(lp->spi->irq);
-	if (irq_type == IRQ_TYPE_EDGE_FALLING)
+	if (irq_type == IRQ_TYPE_EDGE_RISING ||
+	    irq_type == IRQ_TYPE_EDGE_FALLING)
+		dev_warn(&lp->spi->dev,
+			 "Using edge triggered irq's are not recommended!\n");
+	if (irq_type == IRQ_TYPE_EDGE_FALLING ||
+	    irq_type == IRQ_TYPE_LEVEL_LOW)
 		irq_pol = IRQ_ACTIVE_LOW;
 
 	rc = at86rf230_write_subreg(lp, SR_IRQ_POLARITY, irq_pol);
@@ -1341,6 +1341,11 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	if (rc)
 		return rc;
 
+	/* reset values differs in at86rf231 and at86rf233 */
+	rc = at86rf230_write_subreg(lp, SR_IRQ_MASK_MODE, 0);
+	if (rc)
+		return rc;
+
 	get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
 	rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
 	if (rc)
@@ -1362,6 +1367,45 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	usleep_range(lp->data->t_sleep_cycle,
 		     lp->data->t_sleep_cycle + 100);
 
+	/* xtal_trim value is calculated by:
+	 * CL = 0.5 * (CX + CTRIM + CPAR)
+	 *
+	 * whereas:
+	 * CL = capacitor of used crystal
+	 * CX = connected capacitors at xtal pins
+	 * CPAR = in all at86rf2xx datasheets this is a constant value 3 pF,
+	 *	  but this is different on each board setup. You need to fine
+	 *	  tuning this value via CTRIM.
+	 * CTRIM = variable capacitor setting. Resolution is 0.3 pF range is
+	 *	   0 pF upto 4.5 pF.
+	 *
+	 * Examples:
+	 * atben transceiver:
+	 *
+	 * CL = 8 pF
+	 * CX = 12 pF
+	 * CPAR = 3 pF (We assume the magic constant from datasheet)
+	 * CTRIM = 0.9 pF
+	 *
+	 * (12+0.9+3)/2 = 7.95 which is nearly at 8 pF
+	 *
+	 * xtal_trim = 0x3
+	 *
+	 * openlabs transceiver:
+	 *
+	 * CL = 16 pF
+	 * CX = 22 pF
+	 * CPAR = 3 pF (We assume the magic constant from datasheet)
+	 * CTRIM = 4.5 pF
+	 *
+	 * (22+4.5+3)/2 = 14.75 which is the nearest value to 16 pF
+	 *
+	 * xtal_trim = 0xf
+	 */
+	rc = at86rf230_write_subreg(lp, SR_XTAL_TRIM, xtal_trim);
+	if (rc)
+		return rc;
+
 	rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &dvdd);
 	if (rc)
 		return rc;
@@ -1377,24 +1421,30 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0);
 }
 
-static struct at86rf230_platform_data *
-at86rf230_get_pdata(struct spi_device *spi)
+static int
+at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr,
+		    u8 *xtal_trim)
 {
-	struct at86rf230_platform_data *pdata;
+	struct at86rf230_platform_data *pdata = spi->dev.platform_data;
+	int ret;
 
-	if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node)
-		return spi->dev.platform_data;
+	if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) {
+		if (!pdata)
+			return -ENOENT;
 
-	pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		goto done;
+		*rstn = pdata->rstn;
+		*slp_tr = pdata->slp_tr;
+		*xtal_trim = pdata->xtal_trim;
+		return 0;
+	}
 
-	pdata->rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
-	pdata->slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
+	*rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
+	*slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
+	ret = of_property_read_u8(spi->dev.of_node, "xtal-trim", xtal_trim);
+	if (ret < 0 && ret != -EINVAL)
+		return ret;
 
-	spi->dev.platform_data = pdata;
-done:
-	return pdata;
+	return 0;
 }
 
 static int
@@ -1501,43 +1551,43 @@ at86rf230_setup_spi_messages(struct at86rf230_local *lp)
 
 static int at86rf230_probe(struct spi_device *spi)
 {
-	struct at86rf230_platform_data *pdata;
 	struct ieee802154_hw *hw;
 	struct at86rf230_local *lp;
 	unsigned int status;
-	int rc, irq_type;
+	int rc, irq_type, rstn, slp_tr;
+	u8 xtal_trim;
 
 	if (!spi->irq) {
 		dev_err(&spi->dev, "no IRQ specified\n");
 		return -EINVAL;
 	}
 
-	pdata = at86rf230_get_pdata(spi);
-	if (!pdata) {
-		dev_err(&spi->dev, "no platform_data\n");
-		return -EINVAL;
+	rc = at86rf230_get_pdata(spi, &rstn, &slp_tr, &xtal_trim);
+	if (rc < 0) {
+		dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc);
+		return rc;
 	}
 
-	if (gpio_is_valid(pdata->rstn)) {
-		rc = devm_gpio_request_one(&spi->dev, pdata->rstn,
+	if (gpio_is_valid(rstn)) {
+		rc = devm_gpio_request_one(&spi->dev, rstn,
 					   GPIOF_OUT_INIT_HIGH, "rstn");
 		if (rc)
 			return rc;
 	}
 
-	if (gpio_is_valid(pdata->slp_tr)) {
-		rc = devm_gpio_request_one(&spi->dev, pdata->slp_tr,
+	if (gpio_is_valid(slp_tr)) {
+		rc = devm_gpio_request_one(&spi->dev, slp_tr,
 					   GPIOF_OUT_INIT_LOW, "slp_tr");
 		if (rc)
 			return rc;
 	}
 
 	/* Reset */
-	if (gpio_is_valid(pdata->rstn)) {
+	if (gpio_is_valid(rstn)) {
 		udelay(1);
-		gpio_set_value(pdata->rstn, 0);
+		gpio_set_value(rstn, 0);
 		udelay(1);
-		gpio_set_value(pdata->rstn, 1);
+		gpio_set_value(rstn, 1);
 		usleep_range(120, 240);
 	}
 
@@ -1571,7 +1621,7 @@ static int at86rf230_probe(struct spi_device *spi)
 
 	spi_set_drvdata(spi, lp);
 
-	rc = at86rf230_hw_init(lp);
+	rc = at86rf230_hw_init(lp, xtal_trim);
 	if (rc)
 		goto free_dev;