diff options
| author | Niklas Cassel <niklas.cassel@axis.com> | 2016-12-07 15:20:08 +0100 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2016-12-08 13:07:10 -0500 |
| commit | 4022d039a315951e59d95d22e79198d861ce4490 (patch) | |
| tree | b6e62d85500ffa47e347dfa4f380f3c69eaabbdf /drivers | |
| parent | 89caaa2d80b7bf9bd8632cd3137254f8c685e5db (diff) | |
| download | linux-4022d039a315951e59d95d22e79198d861ce4490.tar.bz2 | |
net: smmac: allow configuring lower pbl values
The driver currently always sets the PBLx8/PBLx4 bit, which means that
the pbl values configured via the pbl/txpbl/rxpbl DT properties are
always multiplied by 8/4 in the hardware.
In order to allow the DT to configure lower pbl values, while at the
same time not changing behavior of any existing device trees using the
pbl/txpbl/rxpbl settings, add a property to disable the multiplication
of the pbl by 8/4 in the hardware.
Suggested-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
4 files changed, 7 insertions, 2 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index 99b8040af592..612d3aaac9a4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -98,7 +98,8 @@ static void dwmac1000_dma_init(void __iomem *ioaddr, * Note: before stmmac core 3.50 this mode bit was 4xPBL, and * post 3.5 mode bit acts as 8*PBL. */ - value |= DMA_BUS_MODE_MAXPBL; + if (dma_cfg->pblx8) + value |= DMA_BUS_MODE_MAXPBL; value |= DMA_BUS_MODE_USP; value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK); value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index 2c3b2098f350..8196ab5fc33c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -84,7 +84,8 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr, * on each channel */ value = readl(ioaddr + DMA_CHAN_CONTROL(channel)); - value = value | DMA_BUS_MODE_PBL; + if (dma_cfg->pblx8) + value = value | DMA_BUS_MODE_PBL; writel(value, ioaddr + DMA_CHAN_CONTROL(channel)); value = readl(ioaddr + DMA_CHAN_TX_CONTROL(channel)); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 56c8a2342c14..a2831773431a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -81,6 +81,7 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat) plat->mdio_bus_data->phy_mask = 0; plat->dma_cfg->pbl = 32; + plat->dma_cfg->pblx8 = true; /* TODO: AXI */ /* Set default value for multicast hash bins */ @@ -115,6 +116,7 @@ static int quark_default_data(struct plat_stmmacenet_data *plat, plat->mdio_bus_data->phy_mask = 0; plat->dma_cfg->pbl = 16; + plat->dma_cfg->pblx8 = true; plat->dma_cfg->fixed_burst = 1; /* AXI (TODO) */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 96afe0561c99..082cd48db6a7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -317,6 +317,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) dma_cfg->pbl = DEFAULT_DMA_PBL; of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl); of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl); + dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8"); dma_cfg->aal = of_property_read_bool(np, "snps,aal"); dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst"); |